Congenital duplication of the thumb is usually reconstructed by 18 months of age. This paper reports satisfactory outcome following reconstruction of two Wassel Type IV duplicate thumbs in adults aged over 40. Both achieved a good outcome based on Tada's criteria and a subjective Visual analogue score 8.
Despite considerable research in advanced countries on public perceptions of and attitudes to modern biotechnology, limited effort has been geared towards developing a structural model of public attitudes to modern biotechnology. The purpose of this paper is to identify the relevant factors influencing public attitudes towards genetically modified (GM) soybean, and to analyze the relationship between all the attitudinal factors. A survey was carried out on 1,017 respondents from various stakeholder groups in the Klang Valley region. Results of the survey have confirmed that attitudes towards complex issues such as biotechnology should be seen as a multifaceted process. The most important factors predicting support for GM soybean are the specific application-linked perceptions about the benefits, acceptance of risk and moral concern while risk and familiarity are significant predictors of benefit and risk acceptance. Attitudes towards GM soybean are also predicted by several general classes of attitude.
Development and promotion of dietary guidelines is one of the key activities outlined in the National Plan of Action for Nutrition of Malaysia for the prevention of nutrition-related disorders. The first official Malaysian Dietary Guidelines (MDG) was published in 1999 and was thoroughly reviewed and launched on 25 March 2010. The new MDG 2010 is a compilation of science-based nutrition and physical activity recommendations. These guidelines form the basis of consistent and scientifically sound nutrition messages for the public. There are 14 key messages and 55 recommendations, covering the whole range of food and nutrition issues, from importance of consuming a variety of foods to guidance on specific food groups, messages to encourage physical activities, consuming safe food and beverages and making effective use of nutrition information on food labels. The MDG also has an updated food pyramid. Various efforts have been made to ensure that the revised MDG is disseminated to all stakeholders. The Ministry of Health has organised a series of workshops for nutritionists and other health care professionals, and the food industry. In collaboration with other professional bodies and the private sector, the Nutrition Society of Malaysia has been promoting the dissemination and usage of the MDG to the public through a variety of formats and channels. These include the publication of a series of leaflets, educational press articles, educational booklets, as well as through educational activities for children. It is imperative to monitor the usage and evaluation of these dietary messages.
Matched MeSH terms: Diet/methods*; Health Promotion/methods*
Titania nanotubes are gaining prominence in photocatalysis, owing to their excellent physical and chemical properties such as high surface area, excellent photocatalytic activity, and widespread availability. They are easily produced by a simple and effective hydrothermal method under mild temperature and pressure conditions. This paper reviews and analyzes the mechanism of titania nanotube formation by hydrothermal treatment. It further examines the parameters that affect the formation of titania nanotubes, such as starting material, sonication pretreatment, hydrothermal temperature, washing process, and calcination process. Finally, the effects of the presence of dopants on the formation of titania nanotubes are analyzed.
Atmospheric corrections for multi-temporal optical satellite images are necessary, especially in change detection analyses, such as normalized difference vegetation index (NDVI) rationing. Abrupt change detection analysis using remote-sensing techniques requires radiometric congruity and atmospheric correction to monitor terrestrial surfaces over time. Two atmospheric correction methods were used for this study: relative radiometric normalization and the simplified method for atmospheric correction (SMAC) in the solar spectrum. A multi-temporal data set consisting of two sets of Landsat images from the period between 1991 and 2002 of Penang Island, Malaysia, was used to compare NDVI maps, which were generated using the proposed atmospheric correction methods. Land surface temperature (LST) was retrieved using ATCOR3_T in PCI Geomatica 10.1 image processing software. Linear regression analysis was utilized to analyze the relationship between NDVI and LST. This study reveals that both of the proposed atmospheric correction methods yielded high accuracy through examination of the linear correlation coefficients. To check for the accuracy of the equation obtained through linear regression analysis for every single satellite image, 20 points were randomly chosen. The results showed that the SMAC method yielded a constant value (in terms of error) to predict the NDVI value from linear regression analysis-derived equation. The errors (average) from both proposed atmospheric correction methods were less than 10%.
Radio frequency identification (RFID) systems are emerging as the primary object identification mechanism, especially in supply chain management. However, RFID naturally generates a large amount of duplicate readings. Removing these duplicates from the RFID data stream is paramount as it does not contribute new information to the system and wastes system resources. Existing approaches to deal with this problem cannot fulfill the real time demands to process the massive RFID data stream. We propose a data filtering approach that efficiently detects and removes duplicate readings from RFID data streams. Experimental results show that the proposed approach offers a significant improvement as compared to the existing approaches.
Matched MeSH terms: Statistics as Topic/methods*; Radio Frequency Identification Device/methods*
Co-management is now established as a mainstream approach to small-scale fisheries management across the developing world. A comprehensive review of 204 potential cases reveals a lack of impact assessments of fisheries co-management. This study reports on a meta-analysis of the impact of fisheries co-management in developing countries in 90 sites across 29 case-studies. The top five most frequently measured process indicators are participation, influence, rule compliance, control over resources, and conflict. The top five most frequently measured outcome indicators are access to resources, resource well-being, fishery yield, household well-being, and household income. To deal with the diversity of the 52 indicators measured and the different ways these data are collected and analysed, we apply a coding system to capture change over time. The results of the meta-analysis suggest that, overall fisheries co-management delivers benefits to end-users through improvements in key process and outcome indicators. However, the dataset as a whole is constituted primarily of data from the Philippines. When we exclude this body of work, few generalisations can be made about the impact of fisheries co-management. The lack of comparative data suitable for impact assessment and the difficulties in comparing data and generalising across countries and regions reiterates calls in other fields for more systematic approaches to understanding and evaluating governance frameworks.
Matched MeSH terms: Conservation of Natural Resources/methods*; Fisheries/methods*
The development of a two phase hollow fiber liquid-phase microextraction technique, followed by gas-chromatography-flame ionization detection (GC-FID) for the profiling of the fatty acids (FAs) (lauric, myristic, palmitic, stearic, palmitoleic, oleic, linoleic, linolenic and arachidic) in vegetable oils is described. Heptadecanoic acid methyl ester was used as the internal standard. The FAs were transesterified to their corresponding methyl esters prior to the extraction. Extraction parameters such as type of extracting solvent, temperature, extraction time, stirring speed and salt addition were studied and optimized. Recommended conditions were extraction solvent, n-tridecane; extraction time, 35 min; extraction temperature, ambient; without addition of salt. Enrichment factors varying from 37 to 115 were achieved. Calibration curves for the nine FAs were well correlated (r(2)>0.994) within the range of 10-5000 μg L(-1). The limit of detection (signal:noise, 3) was 4.73-13.21 ng L(-1). The method was successfully applied to the profiling of the FAs in palm oils (crude, olein, kernel, and carotino cooking oil) and other vegetable oils (soybean, olive, coconut, rice bran and pumpkin). The encouraging enrichments achieved offer an interesting option for the profiling of the minor and major FAs in palm and other vegetable oils.
Formation of compost from oil palm empty fruit bunches (EFB) and decanter cake slurry by adding palm oil mill effluent (POME) with regular turning operation was investigated. The experiment was conducted in a commercial composting plant under the normal production process. The addition of decanter cake slurry has hastened the composting process of the EFB. The C/N ratio after 51 days for the mature compost with the decanter cake slurry was 18.65 while that of the matured compost without the decanter cake slurry remained high at 28.96. The compost formed from the addition of decanter cake to EFB and POME had 46.4% nitrogen, 17.9% phosphorus, 17.7% potassium and 23.1% calcium more than that without decanter cake. The use of compost produced from EFB, POME and decanter cake slurry could solve more environmental problems and enhance economic benefits in the oil palm industry.
Waste plastics contain a substantial number of valuable chemicals. The wastes from post-consumer as well as from industrial production can be recycled to valuable chemical feedstock, which can be used in refineries and/or petrochemical industries. This chemical recycling process is an ideal approach in recycling the waste for a better environment. Polymer cracking using a laboratory fluidized bed reactor concentrated on the used highly contaminated catalyst, E-Cat 2. Even though E-Cat 2 had low activity due to fewer acid sites, the products yielded were similar with amorphous ASA and were far better than thermal cracking. The high levels of heavy metals, namely nickel and vanadium, deposited during their lifetime as an FCC catalyst, did not greatly affect on the catalyst activity. It was also shown that E-Cat 2 could be used with and without regeneration. Although there was more deactivation when there was no regeneration step, the yield of gases (C(2)-C(7)) remained fairly constant. For the first time, these results indicate that "waste" FCC catalyst (E-Cat) is a good candidate for future feedstock recycling of polymer waste. The major benefits of using E-Cat are a low market price, the ability to tolerate reuse and regeneration capacity.
This study tested the possibility that interactive lectures explicitly based on activating learners' prior knowledge and driven by a series of logical questions might enhance the effectiveness of lectures. A class of 54 students doing the respiratory system course in the second year of the Bachelor of Medicine and Bachelor of Surgery program in my university was randomized to two groups to receive one of two types of lectures, "typical" lectures (n = 28, 18 women and 10 men) or "constructivist" lectures (n = 26, 19 women and 7 men), on the same topic: the regulation of respiration. Student pretest scores in the two groups were comparable (P > 0.1). Students that received the constructivist lectures did much better in the posttest conducted immediately after the lectures (6.8 +/- 3.4 for constructivist lectures vs. 4.2 +/- 2.3 for typical lectures, means +/- SD, P = 0.004). Although both types of lectures were well received, students that received the constructivist lectures appeared to have been more satisfied with their learning experience. However, on a posttest conducted 4 mo later, scores obtained by students in the two groups were not any different (6.9 +/- 3 for constructivist lectures vs. 6.9 +/- 3.7 for typical lectures, P = 0.94). This study adds to the increasing body of evidence that there is a case for the use of interactive lectures that make the construction of knowledge and understanding explicit, easy, and enjoyable to learners.
An exponential contrast stretching (ECS) technique is developed to reduce the charging effects on scanning electron microscope images. Compared to some of the conventional histogram equalization methods, such as bi-histogram equalization and recursive mean-separate histogram equalization, the proposed ECS method yields better image compensation. Diode sample chips with insulating and conductive surfaces are used as test samples to evaluate the efficiency of the developed algorithm. The algorithm is implemented in software with a frame grabber card, forming the front-end video capture element.
The integration of communication technologies such as radio frequency identification (RFID), global positioning system (GPS), general packet radio system (GPRS), and geographic information system (GIS) with a camera are constructed for solid waste monitoring system. The aim is to improve the way of responding to customer's inquiry and emergency cases and estimate the solid waste amount without any involvement of the truck driver. The proposed system consists of RFID tag mounted on the bin, RFID reader as in truck, GPRS/GSM as web server, and GIS as map server, database server, and control server. The tracking devices mounted in the trucks collect location information in real time via the GPS. This information is transferred continuously through GPRS to a central database. The users are able to view the current location of each truck in the collection stage via a web-based application and thereby manage the fleet. The trucks positions and trash bin information are displayed on a digital map, which is made available by a map server. Thus, the solid waste of the bin and the truck are being monitored using the developed system.
Shifting the paradigm of treatment of a locally recurrent nasopharyngeal carcinoma (NPC) from the non-surgical management to a surgical modality has always been a challenge. However, many studies on endoscopic nasopharyngectomy have proven it to be a reliable form of treatment with an excellent outcome. Since 2007, in Sarawak General Hospital, six cases of endoscopic nasopharyngectomy for locally recurrent NPC have been performed with encouraging results.
A new alcohol oxidase (AOX) enzyme-based formaldehyde biosensor based on acrylic microspheres has been developed. Hydrophobic poly(n-butyl acrylate-N-acryloxy-succinimide) [poly(nBA-NAS)] microspheres, an enzyme immobilization matrix, was synthesized using photopolymerization in an emulsion form. AOX-poly(nBA-NAS) microspheres were deposited on a pH transducer made from a layer of photocured and self-plasticized polyacrylate membrane with an entrapped pH ionophore coated on a Ag/AgCl screen printed electrode (SPE). Oxidation of formaldehyde by the immobilized AOX resulted in the production of protons, which can be determined via the pH transducer. Effects of buffer concentrations, pH and different amount of immobilization matrix towards the biosensor's analytical performance were investigated. The formaldehyde biosensor exhibited a dynamic linear response range to formaldehyde from 0.3-316.2 mM and a sensitivity of 59.41 ± 0.66 mV/decade (R(2) = 0.9776, n = 3). The lower detection limit of the biosensor was 0.3 mM, while reproducibility and repeatability were 3.16% RSD (relative standard deviation) and 1.11% RSD, respectively (n = 3). The use of acrylic microspheres in the potentiometric formaldehyde biosensor improved the biosensor's performance in terms of response time, linear response range and long term stability when compared with thick film immobilization methods.
Following hematopoietic stem cell transplantation (HSCT), it is important to determine whether engraftment is successful and to track the dynamic changes of the graft. Tandem repeats such as minisatellites and microsatellites are currently the most established markers for chimerism application. We have developed a reliable method to quantitatively evaluate engraftment status in post-allogeneic HSCT patients using variable number of tandem repeat (VNTR) markers and "lab-on-a-chip" microfluidic electrophoresis technology. Following identification of an informative marker by conventional polymerase chain reaction (PCR), donor chimerism percentage was calculated based on a standard curve generated from artificially mixed patient-donor DNA-specific alleles in serial dilutions. All PCR products were mixed with commercial gel dye and loaded into Agilent DNA 1000 microfluidic LabChips for DNA sizing and quantitation. In 44 patients, separation of pretransplant and donor DNA fragments was resolved clearly and accomplished rapidly within 30min. Chimerism analysis using this platform is able to detect an amount as low as 6.3% donor DNA with acceptable coefficient of variation values. We also demonstrated concordant chimerism analysis findings using both microchip tandem repeats and real-time PCR quantitation of insertion-deletion polymorphisms. This microchip platform obviates the need for fluorescently labeled primers or any post-PCR sample manipulation. Quantitative monitoring of post-HSCT chimerism status using microfluidic electrophoresis is a useful tool for both large- and small-scale post-HSCT chimerism centers.