Displaying publications 41 - 60 of 83 in total

Abstract:
Sort:
  1. Al-Alwani MA, Mohamad AB, Kadhum AA, Ludin NA
    PMID: 25483560 DOI: 10.1016/j.saa.2014.11.018
    Nine solvents, namely, n-hexane, ethanol, acetonitrile, chloroform, ethyl-ether, ethyl-acetate, petroleum ether, n-butyl alcohol, and methanol were used to extract natural dyes from Cordyline fruticosa, Pandannus amaryllifolius and Hylocereus polyrhizus. To improve the adsorption of dyes onto the TiO2 particles, betalain and chlorophyll dyes were mixed with methanol or ethanol and water at various ratios. The adsorption of the dyes mixed with titanium dioxide (TiO2) was also observed. The highest adsorption of the C.fruticosa dye mixed with TiO2 was achieved at ratio 3:1 of methanol: water. The highest adsorption of P.amaryllifolius dye mixed with TiO2 was observed at 2:1 of ethanol: water. H.polyrhizus dye extracted by water and mixed with TiO2 demonstrated the highest adsorption among the solvents. All extracted dye was adsorbed onto the surface of TiO2 based on Fourier Transform Infrared Spectroscopy (FTIR) analysis. The inhibition of crystallinity of TiO2 was likewise investigated by X-ray analysis. The morphological properties and composition of dyes were analyzed via SEM and EDX.
  2. Hussein HT, Kadhim A, Al-Amiery AA, Kadhum AA, Mohamad AB
    ScientificWorldJournal, 2014;2014:842062.
    PMID: 25136694 DOI: 10.1155/2014/842062
    Influence of laser treatment on mechanical properties, wear resistance, and Vickers hardness of aluminum alloy was studied. The specimens were treated by using Nd:YaG laser of energy 780 mj, wavelength 512 nm, and duration time 8 ns. The wear behavior of the specimens was studied for all specimens before and after treatment by Nd:YaG laser and the dry wear experiments were carried out by sing pinon-disc technique. The specimens were machined as a disk with diameter of 25 mm and circular groove in depth of 3 mm. All specimens were conducted by scanning electron microscopy (SEM), energy-dispersive X-ray fluorescence analysis (EDS), optical microscopy, and Vickers hardness. The results showed that the dry wear rate was decreased after laser hardening and increased Vickers hardness values by ratio of 2.4:1. The results showed that the values of wear rate for samples having circular grooves are less than samples without grooves after laser treatment.
  3. Al-Amiery AA, Al-Majedy YK, Kadhum AA, Mohamad AB
    Molecules, 2014 Dec 29;20(1):366-83.
    PMID: 25551187 DOI: 10.3390/molecules20010366
    The anticorrosion ability of a synthesized coumarin, namely 2-(coumarin-4-yloxy)acetohydrazide (EFCI), for mild steel (MS) in 1 M hydrochloric acid solution has been studied using a weight loss method. The effect of temperature on the corrosion rate was investigated, and some thermodynamic parameters were calculated. The results indicated that inhibition efficiencies were enhanced with an increase in concentration of inhibitor and decreased with a rise in temperature. The IE value reaches 94.7% at the highest used concentration of the new eco-friendly inhibitor. The adsorption of inhibitor on MS surface was found to obey a Langmuir adsorption isotherm. Scanning electron microscopy (SEM) was performed on inhibited and uninhibited mild steel samples to characterize the surface. The Density Function theory (DFT) was employed for quantum-chemical calculations such as EHOMO (highest occupied molecular orbital energy), ELUMO (lowest unoccupied molecular orbital energy) and μ (dipole moment), and the obtained results were found to be consistent with the experimental findings. The synthesized inhibitor was characterized by Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopic studies.
  4. Junaedi S, Al-Amiery AA, Kadihum A, Kadhum AA, Mohamad AB
    Int J Mol Sci, 2013 Jun 04;14(6):11915-28.
    PMID: 23736696 DOI: 10.3390/ijms140611915
    1,5-Dimethyl-4-((2-methylbenzylidene)amino)-2-phenyl-1H-pyrazol-3(2H)-one (DMPO) was synthesized to be evaluated as a corrosion inhibitor. The corrosion inhibitory effects of DMPO on mild steel in 1.0 M HCl were investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). The results showed that DMPO inhibited mild steel corrosion in acid solution and indicated that the inhibition efficiency increased with increasing inhibitor concentration. Changes in the impedance parameters suggested an adsorption of DMPO onto the mild steel surface, leading to the formation of protective films. The novel synthesized corrosion inhibitor was characterized using UV-Vis, FT-IR and NMR spectral analyses. Electronic properties such as highest occupied molecular orbital energy, lowest unoccupied molecular orbital energy (EHOMO and ELUMO, respectively) and dipole moment (μ) were calculated and discussed. The results showed that the corrosion inhibition efficiency increased with an increase in the EHOMO values but with a decrease in the ELUMO value.
  5. Al-Majedy YK, Al-Amiery AA, Kadhum AA, Mohamad AB
    PLoS One, 2016;11(5):e0156625.
    PMID: 27243231 DOI: 10.1371/journal.pone.0156625
    The synthesis of derivatives of 4-Methylumbelliferone (4-MUs), which are structurally interesting antioxidants, was performed in this study. The modification of 4-Methylumbelliferone (4-MU) by different reaction steps was performed to yield the target compounds, the 4-MUs. The 4-MUs were characterized by different spectroscopic techniques (Fourier transform infrared; FT-IR and Nuclear magnetic resonance; NMR) and micro-elemental analysis (CHNS). The in vitro antioxidant activity of the 4-MUs was evaluated in terms of their free radical scavenging activities against 2,2-diphenyl-1-picrylhydrazyl (DPPH), Nitric oxide radical scavenging activity assay, chelating activity and their (FRAP) ferric-reducing antioxidant power, which were compared with a standard antioxidant. Our results reveal that the 4-MUs exhibit excellent radical scavenging activities. The antioxidant mechanisms of the 4-MUs were also studied. Density Function Theory (DFT)-based quantum chemical studies were performed with the basis set at 3-21G. Molecular models of the synthesized compounds were studied to understand the antioxidant activity. The electron levels, namely HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital), for these synthesized antioxidants were also studied.
  6. Al-Amiery AA, Binti Kassim FA, Kadhum AA, Mohamad AB
    Sci Rep, 2016 Jan 22;6:19890.
    PMID: 26795066 DOI: 10.1038/srep19890
    The acid corrosion inhibition process of mild steel in 1 M HCl by azelaic acid dihydrazide has been investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). Azelaic acid dihydrazide was synthesized, and its chemical structure was elucidated and confirmed using spectroscopic techniques (infrared, nuclear magnetic resonance and mass spectroscopy). Potentiodynamic polarization studies indicate that azelaic acid dihydrazide is a mixed-type inhibitor. The inhibition efficiency increases with increased inhibitor concentration and reaches its maximum of 93% at 5 × 10(-3) M. The adsorption of the inhibitor on a mild steel surface obeys Langmuir's adsorption isotherm. The effect of te perature on corrosion behavior in the presence of 5 × 10(-3) M inhibitor was studied in the temperature range of 30-60 °C. The results indicated that inhibition efficiencies were enhanced with an increase in concentration of inhibitor and decreased with a rise in temperature. To inspect the surface morphology of inhibitor film on the mild steel surface, scanning electron microscopy (SEM) was used before and after immersion in 1.0 M HCl.
  7. Gaaz TS, Sulong AB, Akhtar MN, Kadhum AA, Mohamad AB, Al-Amiery AA
    Molecules, 2015;20(12):22833-47.
    PMID: 26703542 DOI: 10.3390/molecules201219884
    The aim of this review was to analyze/investigate the synthesis, properties, and applications of polyvinyl alcohol-halloysite nanotubes (PVA-HNT), and their nanocomposites. Different polymers with versatile properties are attractive because of their introduction and potential uses in many fields. Synthetic polymers, such as PVA, natural polymers like alginate, starch, chitosan, or any material with these components have prominent status as important and degradable materials with biocompatibility properties. These materials have been developed in the 1980s and are remarkable because of their recyclability and consideration of the natural continuation of their physical and chemical properties. The fabrication of PVA-HNT nanocomposites can be a potential way to address some of PVA's limitations. Such nanocomposites have excellent mechanical properties and thermal stability. PVA-HNT nanocomposites have been reported earlier, but without proper HNT individualization and PVA modifications. The properties of PVA-HNT for medicinal and biomedical use are attracting an increasing amount of attention for medical applications, such as wound dressings, drug delivery, targeted-tissue transportation systems, and soft biomaterial implants. The demand for alternative polymeric medical devices has also increased substantially around the world. This paper reviews individualized HNT addition along with crosslinking of PVA for various biomedical applications that have been previously reported in literature, thereby showing the attainability, modification of characteristics, and goals underlying the blending process with PVA.
  8. Yousif E, Al-Amiery AA, Kadihum A, Kadhum AA, Mohamad AB
    Molecules, 2015 Nov 04;20(11):19886-99.
    PMID: 26556323 DOI: 10.3390/molecules201119665
    The photostabilization of polyvinyl chloride (PVC) films by Schiff bases was investigated. Polyvinyl chloride films containing 0.5 wt % Schiff bases were produced using the same casting method as that used for additive-free PVC films from tetrahydrofuran (THF) solvent. The photostabilization activities of these compounds were determined by monitoring the carbonyl, polyene and hydroxyl indices with irradiation time. The changes in viscosity average molecular weight of PVC with irradiation time were also monitored using THF as a solvent. The quantum yield of chain scission (Φcs) for the studied complexes in PVC was estimated to range between 4.72 and 8.99 × 10(-8). According to the experimental results, several mechanisms were suggested, depending on the structure of the additive. Ultra violet (UV) absorption, peroxide decomposition and radical scavenging were suggested as the photostabilizing mechanisms.
  9. Al-Amiery AA, Al-Majedy YK, Kadhum AA, Mohamad AB
    Sci Rep, 2015;5:11825.
    PMID: 26134661 DOI: 10.1038/srep11825
    The rational design of 4-hydroxycoumarins with tailor-made antioxidant activities is required nowadays due to the wide variety of pharmacologically significant, structurally interesting of coumarins and researcher orientation toward green chemistry and natural products. A simple and unique coumarins have been achieved by reaction of 4-hydroxycoumarin with aromatic aldehyde accompanied with the creation of a macromolecules have 2-aminothiazolidin-4-one. The molecular structures of the compounds were characterized by the Fourier transformation infrared and Nuclear magnetic resonance spectroscopies, in addition to CHN analysis. The scavenging abilities of new compounds against stable DPPH radical (DPPH•) and hydrogen peroxide were done and the results show that the compounds exhibited high antioxidant activates.
  10. Al-Amiery AA, Al-Majedy YK, Kadhum AA, Mohamad AB
    PLoS One, 2015;10(7):e0132175.
    PMID: 26147722 DOI: 10.1371/journal.pone.0132175
    New derivatives of 7-hydroxy-4-methylcoumarin were synthesized using a chemical method and a microwave-assisted method to compare the feasibility, reaction times, and yields of the product. The newly synthesized coumarins were characterized by different spectroscopic techniques (FT-IR and NMR) and micro-elemental analysis (CHNS). In vitro antioxidant activities of these compounds were evaluated against hydrogen peroxide and were compared with standard natural antioxidant, vitamin C. Our results reveal that these compounds exhibit excellent radical scavenging activities.
  11. Singh R, Rehman AU, Ahmed T, Ahmad K, Mahajan S, Pandit AK, et al.
    Inform Med Unlocked, 2023;38:101235.
    PMID: 37033412 DOI: 10.1016/j.imu.2023.101235
    In this paper, a mathematical model for assessing the impact of COVID-19 on tuberculosis disease is proposed and analysed. There are pieces of evidence that patients with Tuberculosis (TB) have more chances of developing the SARS-CoV-2 infection. The mathematical model is qualitatively and quantitatively analysed by using the theory of stability analysis. The dynamic system shows endemic equilibrium point which is stable when R 0 < 1 and unstable when R 0 > 1 . The global stability of the endemic point is analysed by constructing the Lyapunov function. The dynamic stability also exhibits bifurcation behaviour. The optimal control theory is used to find an optimal solution to the problem in the mathematical model. The sensitivity analysis is performed to clarify the effective parameters which affect the reproduction number the most. Numerical simulation is carried out to assess the effect of various biological parameters in the dynamic of both tuberculosis and COVID-19 classes. Our simulation results show that the COVID-19 and TB infections can be mitigated by controlling the transmission rate γ .
  12. Noh LM, Amir HL, Hung LC, Zulkifli I, Nasuruddin BA
    Med J Malaysia, 1997 Mar;52(1):88-91.
    PMID: 10968061
    A 3-month-old Malay male infant presented with multiple infections (candidiasis, Pseudomonas aeruginosa, Cytomegalovirus), persistent pneumonia, intractable diarrhoea and failure to thrive. There was lymphopaenia affecting both T and B subsets. He developed Graft versus Host disease weeks following transfusion with non irradiated blood. In spite of aggressive microbicidal and supportive therapy including regular immunoglobulin infusions, the child succumbed to infection before a bone marrow transplant could be instituted.
  13. Andayani RP, Wahyuni F, Ausrianti R, Reni I, Edo CWD, Amir H
    Med J Malaysia, 2023 Jul;78(4):511-514.
    PMID: 37518923
    INTRODUCTION: Pressure ulcers have adverse effects on health. Thus, early detection of damage to skin integrity is important for preventing the occurrence of pressure sores. Virgin Coconut Oil (VCO) is a nonpharmacological therapy that can be applied to overcome the problem of damage to skin integrity. Virgin coconut oil contains antioxidants and is rich in vitamin E. Meanwhile, two-hourly repositioning is a nursing intervention performed to prevent pressure ulcers.

    MATERIALS AND METHODS: This study aimed to evaluate the implementation of Virgin Coconut Oil and regular repositioning for preventing pressure sores. The designs used quasi experiment pretest and posttest nonequivalent control group; 86 participants were selected through a nonprobability sampling technique by consecutive sampling.

    RESULTS: The fundings suggest that there is a significant difference in the Braden QD scores from before and after virgin coconut oil of the intervention group and repositioning of the control group (p<0.001).

    CONCLUSION: Nurses are expected to be able to detect early damage to skin integrity by using the Braden QD Scale and to implement use Virgin Coconut Oil and repositioning.

  14. Sharief SA, Minhajat R, Riu DS, Bukhari A, Amir H
    Med J Malaysia, 2024 Sep;79(5):646-657.
    PMID: 39352168
    INTRODUCTION: The iron supplementation program for pregnant women is the main program for tackling anemia in various countries, especially in developing countries in which daily diets may lack sufficient iron intake. In Indonesia, it is recommended that expectant mothers ingest 90 iron tablets during their pregnancy; however, the World Health Organization reports that 37% of pregnant women in the country continue to experience anemia. Iron deficiency anemia consistently emerges as the primary etiology for diagnosing anemia; however, it is important to recognize that anemia can stem from various factors beyond just lack of iron. In addition to iron deficiency, chronic illnesses and infections significantly contribute to the prevalence of anemia worldwide. Consequently, this literature review endeavors to uncover the underlying factors responsible for normocytic anemia among pregnant women, focusing on developing countries.

    MATERIALS AND METHODS: Eight search engines, specifically Proquest, EbscoHost, Scopus, Cochrane Library, Science Direct, Wiley Online Library, PubMed, Google Scholar, and Garuda, were utilized to identify primary articles. Three independent reviewers assessed abstracts and full articles based on specific inclusion and exclusion criteria. The data collected encompassed information regarding the population under study, research methods employed, and primary findings pertinent to the review's objectives. Fifteen studies, published between 2014 and 2023, that met the eligibility criteria outlined in the PRISMA-ScR.

    RESULTS: Among the 15 studies on normocytic anemia in pregnant women, malaria and HIV were the highest causes of normocytic anemia, followed by worm/intestinal parasite infections, chronic diseases, and bleeding.. In pregnant women, anemia of chronic disease and infection often coexists with iron deficiency anemia, both show decrease serum iron levels. Hence, other investigations need to be carried out to diagnose with certainty the cause of anemia in pregnant women.

    CONCLUSION: Anemia is not a standalone disease but rather a symptom of various underlying diseases. Therefore, diagnosing anemia requires identifying the basic disease that causes anemia, rather than simply labeling it as anemia.

  15. Jamil DM, Al-Okbi AK, Al-Baghdadi SB, Al-Amiery AA, Kadhim A, Gaaz TS, et al.
    Chem Cent J, 2018 Feb 05;12(1):7.
    PMID: 29404816 DOI: 10.1186/s13065-018-0376-7
    BACKGROUND: Relatively inexpensive, stable Schiff bases, namely 3-((4-hydroxybenzylidene)amino)-2-methylquinazolin-4(3H)-one (BZ3) and 3-((4-(dimethylamino)benzylidene)amino)-2-methylquinazolin-4(3H)-one (BZ4), were employed as highly efficient inhibitors of mild steel corrosion by corrosive acid.

    FINDINGS: The inhibition efficiencies were estimated based on weight loss method. Moreover, scanning electron microscopy was used to investigate the inhibition mechanism. The synthesized Schiff bases were characterized by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy and micro-elemental analysis. The inhibition efficiency depends on three factors: the amount of nitrogen in the inhibitor, the inhibitor concentration and the inhibitor molecular weight.

    CONCLUSIONS: Inhibition efficiencies of 96 and 92% were achieved with BZ4 and BZ3, respectively, at the maximum tested concentration. Density functional theory calculations of BZ3 and BZ4 were performed to compare the effects of hydroxyl and N,N-dimethylamino substituents on the inhibition efficiency, providing insight for designing new molecular structures that exhibit enhanced inhibition efficiencies.

  16. Ismail NFF, Neoh CF, Lean QY, Abdullah AH, Lim SM, Ramasamy K, et al.
    J Pharm Bioallied Sci, 2018 12 21;10(4):199-207.
    PMID: 30568377 DOI: 10.4103/JPBS.JPBS_33_18
    Aims: Facial candling is one of the traditional treatments that is claimed to be able to help in curing or reducing various allergy and inflammation conditions such as allergic rhinitis. We aimed to explore the perceptions of participants with allergic rhinitis toward their disease conditions and facial candling treatment.

    Materials and Methods: The study used a qualitative exploratory design, comprising 12 in-depth interviews. A semi-structured topic guide was used to explore all relevant aspects of the topic, which were audio recorded, transcribed verbatim. All the interviews were conducted in a few beauty salons in purposively selected city areas in the state of Kedah, Malaysia.

    Results: Of the 12 patients, seven (58%) reported a positive experience of facial candling treatment, with improvement in the condition of their allergic rhinitis. Specific themes about the experience of facial candling treatment that were identified within the transcript data included knowledge about facial candling, options for disease treatment, effectiveness of facial candling, sources of information, comparison, application of treatment, treatment budget, and safety. The major strength lies in the fact that reasons for using facial candling were uncovered from the perspectives of people with allergic rhinitis through the in-depth interviews.

    Conclusions: The motives of these participants for using facial candling are mainly due to cultural influence and its low cost of treatment. There were mixed responses from the participants about the usefulness of facial candling. Most of the respondents had not assessed the safety of prolonged use of facial candling and regarded it as a safe procedure as this has been practiced for generations.

  17. Gaaz TS, Kadhum AAH, Michael PKA, Al-Amiery AA, Sulong AB, Nassir MH, et al.
    Polymers (Basel), 2017 Jun 06;9(6).
    PMID: 30970887 DOI: 10.3390/polym9060207
    A halloysite nanotubes⁻polyvinyl alcohol⁻polyvinylpyrrolidone (HNTs⁻PVA⁻PVP) composite has been investigated for a quite long time aiming at improving the physico⁻chemical characterization of HNTs. In this work, HNTs⁻PVA⁻PVP composite were prepared based on a unique procedure characterized by crosslinking two polymers with HNTs. The composite of two polymers were modified by treating HNTs with phosphoric acid (H₃PO₄) and by using malonic acid (MA) as a crosslinker. The composite was also treated by adding the dispersion agent sodium dodecyl sulfate (SDS). The HNTs⁻PVA⁻PVP composite shows better characteristics regarding agglomeration when HNTs is treated in advance by H₃PO₄. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), brunauer⁻emmett⁻teller (BET), size distribution, and atomic force microscopy (AFM) are used to characterize the physio-chemical properties of the composite. FTIR shows additional peaks at 2924.29, 1455.7, and 682.4 cm-1 compared to the neat HNTs due to adding MA. Despite that, the XRD spectra do not show a significant difference, the decrease in peak intensity could be attributed to the addition of semi-crystalline PVA and the amorphous PVP. The images taken by TEM and FESEM show the possible effects of MA on the morphology and internal feature of HNTs⁻PVA⁻PVP composite treated by MA by showing the deformation of the matrix. The BET surface area increased to 121.1 m²/g compared to the neat HNTs at 59.1 m²/g. This result, the second highest recorded result, is considered a breakthrough in enhancing the properties of HNTs⁻PVA⁻PVP composite, and treatment by MA crosslinking may attribute to the size and the number of the pores. The results from these techniques clearly showed that a significant change has occurred for treated HNTs⁻PVA⁻PVP composite where MA was added. The characterization of HNTs⁻PVA⁻PVP composite with and without treating HNTs and using crosslinker may lead to a better understanding of this new composites as a precursor to possible applications in the dentistry field.
  18. Al-Edan AK, Roslam Wan Isahak WN, Che Ramli ZA, Al-Azzawi WK, Kadhum AAH, Jabbar HS, et al.
    Heliyon, 2023 Apr;9(4):e14657.
    PMID: 37025890 DOI: 10.1016/j.heliyon.2023.e14657
    Due to growing environmental concerns and regulations limiting the use of harmful and toxic synthetic corrosion inhibitors, there is a high demand for sustainable corrosion inhibitors. In this study, a green and rapid technique was used to synthesize amide N-(4-aminobutyl)palmitamide (BAPA) which yielded 91.17% of the product within 2 min, compared to a low yield of 75-80% and a very long 8-10 h reaction time with the conventional thermal condensation method. The chemical structure of BAPA was analyzed by FT-IR, 1HNMR and 13CNMR spectra, as well as CHNS elemental analysis. When applied to mild steel exposed to 1 M HCl, BAPA delayed and reduced corrosion by adsorbing to the steel surface to form a protective layer. The inhibition efficiency increased with increasing amide concentration, and maximal inhibition of 91.5% was observed at 0.5 mM BAPA. The adsorption of BAPA on mild steel in an acidic solution was studied and inhibition performance was correlated with the calculated adsorption-free energy ΔGads, indicating good agreement between the experimental and adsorption findings. Surface morphology of untreated and treated mild steel coupons was evaluated by SEM, and based on density functional theory (DFT) computations and atomic charges analysis, a stronger interaction was observed between BAPA and mild steel surface leading to the formation of a compact protective film on the metallic surface. This protective film is attributed to the presence of nitrogen atoms and carbonyl group in the chemical structure of BAPA.
  19. Al-Azawi KF, Al-Baghdadi SB, Mohamed AZ, Al-Amiery AA, Abed TK, Mohammed SA, et al.
    Chem Cent J, 2016;10:23.
    PMID: 27134648 DOI: 10.1186/s13065-016-0170-3
    BACKGROUND: The acid corrosion inhibition process of mild steel in 1 M HCl by 4-[(2-amino-1, 3, 4-thiadiazol-5-yl)methoxy]coumarin (ATC), has been investigated using weight loss technique and scanning electron microscopy (SEM). ATC was synthesized, and its chemical structure was elucidated and confirmed using spectroscopic techniques (infrared and nuclear magnetic resonance spectroscopy).

    FINDINGS: The results indicated that inhibition efficiencies were enhanced with an increase in concentration of inhibitor and decreased with a rise in temperature. The adsorption equilibrium constant (K) and standard free energy of adsorption (ΔGads) were calculated. Quantum chemical parameters such as highest occupied molecular orbital energy, lowest unoccupied molecular orbital energy (EHOMO and ELUMO, respectively) and dipole moment (μ) were calculated and discussed. The results showed that the corrosion inhibition efficiency increased with an increase in both the EHOMO and μ values but with a decrease in the ELUMO value.

    CONCLUSIONS: Our research show that the synthesized macromolecule represents an excellent inhibitor for materials in acidic solutions. The efficiency of this macromolecule had maximum inhibition efficiency up to 96 % at 0.5 mM and diminishes with a higher temperature degree, which is revealing of chemical adsorption. An inhibitor molecule were absorbed by metal surface and follow Langmuir isotherms low and establishes an efficient macromolecule inhibitor having excellent inhibitive properties due to entity of S (sulfur) atom, N (nitrogen) atom and O (oxygen) atom.

  20. Al-Majedy YK, Al-Duhaidahawi DL, Al-Azawi KF, Al-Amiery AA, Kadhum AA, Mohamad AB
    Molecules, 2016 Jan 23;21(2):135.
    PMID: 26805811 DOI: 10.3390/molecules21020135
    Syntheses of coumarins, which are a structurally interesting antioxidant activity, was done in this article. The modification of 7-hydroxycoumarin by different reaction steps was done to yield target compounds. Molecular structures were characterized by different spectroscopical techniques (Fourier transformation infrared and nuclear magnetic resonance). Antioxidant activities were performed by using various in vitro spectrophometric assays against 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical and hydrogen peroxide (H2O2). All compounds exhibited high efficiency as antioxidants compared to ascorbic acid. The highest efficiency scavenging activity was found for compound 3 (91.0 ± 5.0), followed by compounds 2 and 4 (88.0 ± 2.00; and 87.0 ± 3.00). Ascorbic acid C was used as a standard drug with a percentage inhibition of 91.00 ± 1.5. The mechanism of the synthesized compounds as antioxidants was also studied. Hartree-Fock-based quantum chemical studies have been carried out with the basis set to 3-21G, in order to obtain information about the three-dimensional (3D) geometries, electronic structure, molecular modeling, and electronic levels, namely HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital), to understand the antioxidant activity for the synthesized compounds.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links