The title compound, C16H18N2O3, is constructed about a central oxopyridazinyl ring (r.m.s. deviation = 0.0047 Å), which is connected to an ethyl-acetate group at the N atom closest to the carbonyl group, and benzyl and methyl groups second furthest and furthest from the carbonyl group, respectively. An approximately orthogonal relationship exists between the oxopyridazinyl ring and the best plane through the ethyl-acetate group [dihedral angle = 77.48 (3)°]; the latter lies to one side of the central plane [the Nr-Nr-Cm-Cc (r = ring, m = methyl-ene, c = carbon-yl) torsion angle being 104.34 (9)°]. In the crystal, both H atoms of the N-bound methyl-ene group form methyl-ene-C-H⋯O(ring carbon-yl) or N(pyridazin-yl) inter-actions, resulting in the formation of a supra-molecular tape along the a-axis direction. The tapes are assembled into a three-dimensional architecture by methyl- and phenyl-C-H⋯O(ring carbon-yl) and phenyl-C-H⋯O(ester carbon-yl) inter-actions. The analysis of the calculated Hirshfeld surface indicates the dominance of H⋯H contacts to the overall surface (i.e. 52.2%). Reflecting other identified points of contact between mol-ecules noted above, O⋯H/H⋯O (23.3%), C⋯H/H⋯C (14.7%) and N⋯H/H⋯N (6.6%) contacts also make significant contributions to the surface.
China is the world's largest fossil fuel consumer and carbon emitter country. In September 2020, China pledged to reduce carbon emissions, and achieve carbon neutrality by 2060. Therefore, this study aimed to contribute to the literature and show the pictorial nexus of bioenergy and fossil fuel consumption, carbon emission, and agricultural bioeconomic growth, a new pathway towards carbon neutrality. For this study, time-series data from 1971 to 2019 were used to analyze the autoregressive distributed lag (ARDL) bound testing and novel dynamic autoregressive distributed lag (DYNARDL) simulation models. Initially, the unit root tests results showed that all variables were stationarity at the level and first difference. The presence of cointegration between selected variables was confirmed by the results from ARDL bound test. In addition, the results of long-run and short-run nexus show an increase in bioenergy consumption that caused an increase in agricultural bioeconomic growth both in the long and short-run nexus. A decrease in fossil fuel consumption was shown to result in increased agricultural bioeconomic growth with respect to both long- and short-term effects. Furthermore, the results of the novel dynamic ARDL simulation model demonstrated that a 10% positive shock from bioenergy consumption caused an increase in agricultural bioeconomic growth, while at the same time, a 10% negative shock in bioenergy consumption led to a decrease. A 10% negative shock from fossil fuels caused an increase in agricultural bioeconomic growth, whereas a 10% positive shock from fossil fuels led to a decrease. Therefore, this study suggests that China needs to switch from fossil fuel and other non-renewable energy consumption to sources of bioenergy and other renewable energy consumption to achieve carbon neutrality by 2060.
The extensive amount of available information on global warming suggests that this issue has become prevalent worldwide. Majority of countries have issued laws and policies in response to this concern by requiring their industrial sectors to reduce greenhouse gas emissions, such as CO2. Thus, introducing new and more effective treatment methods, such as biological techniques, is crucial to control the emission of greenhouse gases. Many studies have demonstrated CO2 fixation using photo-bioreactors and raceway ponds, but a comprehensive review is yet to be published on biological CO2 fixation. A comprehensive review of CO2 fixation through biological process is presented in this paper as biological processes are ideal to control both organic and inorganic pollutants. This process can also cover the classification of methods, functional mechanisms, designs, and their operational parameters, which are crucial for efficient CO2 fixation. This review also suggests the bio-trickling filter process as an appropriate approach in CO2 fixation to assist in creating a pollution-free environment. Finally, this paper introduces optimum designs, growth rate models, and CO2 fixation of microalgae, functions, and operations in biological CO2 fixation.
The increasing level of greenhouse gas carbon emission currently exacerbates the devastating effect of global warming on the Earth's ecosystem. Energy usage is one of the most important determinants that is increasing the amount of carbon gases being released. Simultaneously, the level of energy usage is derived by the price, and therefore, this study examines the contribution of energy price to carbon gas emissions in thirteen African nations for the period spanning 1990 to 2017. It does this by utilising the cross-sectional dependence (CD), augmented mean group (AMG) and pooled mean group (PMG) panel modelling methods. The findings of the AMG model suggest that a 1% increase in energy price leads to a 0.02% decrease in carbon emission. The results further reveal that a 1% increase in energy intensity and technological innovation leads to 0.04% and 3.65% increase in carbon emission, respectively, in the selected African countries. Findings will help policymakers to implement effective energy price policies to reduce carbon emissions and achieve sustainable development goals especially in the emerging economies of Africa.
This paper presents a fresh understanding of the vigorous connection between inward FDI, renewable energy consumption, economic growth and carbon emission in the Chinese economy employing novel Morlet wavelet analysis. Wavelet correlation, continuous wavelet transform and partial and the multiple wavelet coherence analyses are applied on variables under study for data acquired during the period 1979 to 2017. The outcome of these analyses reveals that the connections among the variables progress over frequency and time. From the frequency domain point of view, the current study discovers noteworthy wavelet coherence and robust lead and lag linkages, although time domain reveals inconsistent associations among the considered variables. The wavelet analysis according to economic point of view supports that inward foreign direct investment (FDI) and renewable energy consumption help to enhance economic condition in Chinese economy. The results also suggested that inward FDI enhances the environmental degradation in medium and long run in China. The results emphasize the significance of having organized strategies by the policymakers to cope with huge environmental degradation occurred for a couple of decades in China.
The carbon dioxide (CO2) crisis is one of the world's most urgent issues. Meeting the worldwide targets set for CO2 capture and storage (CCS) is crucial. Because it may significantly reduce energy consumption compared to traditional amine-based adsorption capture, adsorption dependant CO2 capture is regarded as one of the most hopeful techniques in this paradigm. The expansion of unique, critical edge adsorbent materials has received most of the research attention to date, with the main objective of improving adsorption capacity and lifespan while lowering the temperature of adsorption, thereby lowering the energy demand of sorbent revival. There are specific materials needed for each step of the carbon cycle, including capture, regeneration, and conversion. The potential and efficiency of metal-organic frameworks (MOFs) in overcoming this obstacle have recently been proven through research. In this study, we pinpoint MOFs' precise structural and chemical characteristics that have contributed to their high capture capacity, effective regeneration and separation processes, and efficient catalytic conversions. As prospective materials for the next generation of energy storage and conversion applications, carbon-based compounds like graphene, carbon nanotubes, and fullerenes are receiving a lot of interest. Their distinctive physicochemical characteristics make them suitable for these popular study topics, including structural stability and flexibility, high porosity, and customizable physicochemical traits. It is possible to precisely design the interior of MOFs to include coordinatively unsaturated metal sites, certain heteroatoms, covalent functionalization, various building unit interactions, and integrated nanoscale metal catalysts. This is essential for the creation of MOFs with improved performance. Utilizing the accuracy of MOF chemistry, more complicated materials must be built to handle selectivity, capacity, and conversion all at once to achieve a comprehensive solution. This review summarizes, the most recent developments in adsorption-based CO2 combustion capture, the CO2 adsorption capacities of various classes of solid sorbents, and the significance of advanced carbon nanomaterials for environmental remediation and energy conversion. This review also addresses the difficulties and potential of developing carbon-based electrodes for energy conversion and storage applications.
The present paper implements the quantile autoregressive lagged (QARDL) approach of Cho et al. (2015) and the Granger causality in quantiles tests of Troster et al. (2018) to explore the nonlinear effects of US energy consumption, economic growth, and tourist arrivals on carbon dioxide (CO2) emission. Our results unveil the existence of substantial reversion to the long-run equilibrium connectedness between the variables of interest and CO2 emissions. The outcomes show that tourist arrivals decrease CO2 emissions in the long term for each quantile. In addition, we found that the output growth positively influences the carbon emissions at lower quantiles but negatively influences the carbon emissions at upper quantiles. Moreover, our findings of short-term dynamics validate an asymmetric short-run effect of tourist arrivals and economic growth on CO2 emissions in the US economy. Further results and their corresponding policy implications are discussed.
In recent years, plasma-assisted synthesis has been extensively used in large scale production of functional nano- and micro-scale materials for numerous applications in optoelectronics, photonics, plasmonics, magnetism and drug delivery, however systematic formation of these minuscule structures has remained a challenge. Here we demonstrate a new method to closely manipulate mesostructures in terms of size, composition and morphology by controlling permeability at the boundaries of an impermeable plasma surrounded by a blanket of neutrals. In situ and rapid growth of thin films in the core region due to ion screening is among other benefits of our method. Similarly we can take advantage of exceptional properties of plasma to control the morphology of the as deposited nanostructures. Probing the plasma at boundaries by means of observing the nanostructures, further provides interesting insights into the behaviour of gas-insulated plasmas with possible implications on efficacy of viscous heating and non-magnetic confinement.
Rapid population growth and urbanisation have generated large amount of municipal solid waste (MSW) in many cities. Up to 40-60% of Malaysia's MSW is reported to be food waste where such waste is highly putrescible and can cause bad odour and public health issue if its disposal is delayed. In this study, the implementation of community composting in a village within Iskandar Malaysia is presented as a case study to showcase effective MSW management and mitigation of GHG emission. The selected village, Felda Taib Andak (FTA), is located within a palm oil plantation and a crude palm oil processing mill. This project showcases a community-composting prototype to compost food and oil palm wastes into high quality compost. The objective of this article is to highlight the economic and environment impacts of a community-based composting project to the key stakeholders in the community, including residents, oil palm plantation owners and palm oil mill operators by comparing three different scenarios, through a life cycle approach, in terms of the greenhouse gas emission and cost benefit analysis. First scenario is the baseline case, where all the domestic waste is sent to landfill site. In the second scenario, a small-scale centralised composting project was implemented. In the third scenario, the data obtained from Scenario 2 was used to do a projection on the GHG emission and costing analysis for a pilot-scale centralised composting plant. The study showed a reduction potential of 71.64% on GHG emission through the diversion of food waste from landfill, compost utilisation and significant revenue from the compost sale in Scenario 3. This thus provided better insight into the feasibility and desirability in implementing a pilot-scale centralised composting plant for a sub-urban community in Malaysia to achieve a low carbon and self-sustainable society, in terms of environment and economic aspects.
Valuing sedimentary 'blue carbon' stocks of seagrass meadows requires exclusion of allochthonous recalcitrant forms of carbon, such as black carbon (BC). Regression models constructed across a Southeast Asian tropical estuary predicted that carbon stocks within the sandy meadows of coastal embayments would support a modest but not insignificant amount of BC. We tested the prediction across three coastal meadows of the same region: one patchy meadow located close to a major urban centre and two continuous meadows contained in separate open embayments of a rural marine park; all differed in fetch and species. The BC/total organic carbon (TOC) fractions in the urban and rural meadows with small canopies were more than double the predicted amounts, 28 ± 1.6% and 36 ± 1.5% (±95% confidence intervals), respectively. The fraction in the rural large-canopy meadow remained comparable to the other two meadows, 26 ± 4.9% (±95% confidence intervals) but was half the amount predicted, likely owing to confounding of the model. The relatively high BC/TOC fractions were explained by variability across sites of BC atmospheric supply, an increase in loss of seagrass litter close to the exposed edges of meadows and sediment resuspension across the dispersed patchy meadow.
This study assessed the environmental impacts of the formulation of graphene oxide (GO)/multi-walled carbon nanotubes (MWCNTs) conductive membranes and of the process operating parameters of electrically-enhanced palm oil mill effluent (POME) filtration. Two different analyses approaches were employed, cradle-to-gate approach for conductive membrane production and gate-to-gate approach for the POME filtration process. The parameters in conductive-membrane formulation (e.g. the weight ratio of carbon nanomaterials, and concentration of GO/MWCNT nanohybrids) and process operating parameters (e.g. electric field strength and electricity operating mode) were investigated. The findings herein are twofold. Firstly, for the fabrication of GO/MWCNT conductive membranes, the best weight ratio of GO:MWCNTs was found to be 1:9, given its superior membrane electrical conductivity with lower environmental impacts by 8.51% compared to pristine MWCNTs. The most suitable concentration of carbon nanomaterials was found to be 5 wt%, given its lowest impacts on resource depletion, human health, and ecosystems. Secondly, for the electrically-enhanced POME filtration, the optimum process operating parameters were found to be the application of an electric field of 300 V/cm in the continuous mode, given its lower environmental impacts (22.99%-89.30%) secondary to its requirement of the least electricity to produce permeate. The present study has established not only the optimized conditions in membrane formulation but also the operating parameters of electrically-enhanced filtration; such findings enable the use of cleaner production and sustainable approach to minimize fouling for industrial applications, whilst maintaining excellent efficiency.
Soil respiration is the largest carbon efflux from the terrestrial ecosystem to the atmosphere, and selective logging influences soil respiration via changes in abiotic (temperature, moisture) and biotic (biomass, productivity, quantity and quality of necromass inputs) drivers. Logged forests are a predominant feature of the tropical forest landscape, their area exceeding that of intact forest. We quantified both total and component (root, mycorrhiza, litter, and soil organic matter, SOM) soil respiration in logged (n = 5) and old-growth (n = 6) forest plots in Malaysian Borneo, a region which is a global hotspot for emission from forest degradation. We constructed a detailed below-ground carbon budget including organic carbon inputs into the system via litterfall and root turnover. Total soil respiration was significantly higher in logged forests than in old-growth forests (14.3 ± 0.23 and 12.7 ± 0.60 Mg C ha-1 year-1 , respectively, p = 0.037). This was mainly due to the higher SOM respiration in logged forests (55 ± 3.1% of the total respiration in logged forests vs. 50 ± 3.0% in old-growth forests). In old-growth forests, annual SOM respiration was equal to the organic carbon inputs into the soil (difference between SOM respiration and inputs 0.18 Mg C ha-1 year-1 , with 90% confidence intervals of -0.41 and 0.74 Mg C ha-1 year-1 ), indicating that the system is in equilibrium, while in logged forests SOM respiration exceeded the inputs by 4.2 Mg C ha-1 year-1 (90% CI of 3.6 and 4.9 Mg C ha-1 year-1 ), indicating that the soil is losing carbon. These results contribute towards understanding the impact of logging on below-ground carbon dynamics, which is one of the key uncertainties in estimating emissions from forest degradation. This study demonstrates how significant perturbation of the below-ground carbon balance, and consequent net soil carbon emissions, can persist for decades after a logging event in tropical forests.
The composition of carbon dioxide (CO2) is increasing day by day in the Earth's atmosphere. Worldwide energy demand is now increasing, and this has led to an increase in the percentage of global carbon emission. Moreover, this phenomenon can occur from the careless use of heating systems, generators and especially transportation, therefore, the release of these gases will continue to be widespread if there is no solution. Interaction within the microwave plasma-based gasification system of synthetic natural gas (syngas) production is presented in this paper. Consequently, this reduces the high concentrations of methane and carbon dioxide emission in our atmosphere. Syngas is very useful products that can be used as a source of energy such as fuel production and fuel source. The overview and basic theory about gasification process and microwave plasma technology are provided. Modelling of the microwave plasma system particularly on its application of system electromagnetic field inside waveguide of plasma reactor to produce microwave plasma and how it was calculated are presented in this paper. To recapitulate, the global challenges on the rising of greenhouse gases volume can be regulated with microwave plasma technology and its important aspects have been underlined.
Carbon capture can be implemented at a large scale only if the CO2 selective materials are abundantly available at low cost. Since the sustainable requirement also elevated, the low-cost and biodegradable cellulosic materials are developed into CO2 selective adsorbent and membranes recently. The applications of cellulose, cellulosic derivatives and nanocellulose as CO2 selective adsorbents and membranes are reviewed here. The fabrication and modification strategies are discussed besides comparing their CO2 separation performance. Cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs) isolated from cellulose possess a big surface area for mechanical enhancement and a great number of hydroxyl groups for modification. Nanocellulose aerogels with the large surface area were chemically modified to improve their selectivity towards CO2. Even with the reduction of surface area, amino-functionalized nanocellulose aerogels exhibited the satisfactory chemisorption of CO2 with a capacity of more than 2 mmol/g was recorded. Inorganic fillers such as silica, zeolite and MOFs were further incorporated into nanocellulose aerogels to enhance the physisorption of CO2 by increasing the surface area. Although CO2 adsorbents developed from cellulose and cellulose derivatives were less reported, their applications as the building blocks of CO2 separation membranes had been long studied. Cellulose acetate membranes were commercialized for CO2 separation, but their separation performance could be further improved with silane or inorganic filler. CNCs and CNFs enhanced the CO2 selectivity and permeance through polyvinyl alcohol coating on membranes, but only CNF membranes incorporated with MOFs were explored so far. Although some of these membranes surpassed the upper-bound of Robeson plot, their stability should be further investigated.
Given their advantages of high photosynthetic efficiency and non-competition with land-based crops, algae, that are carbon-hungry and sunlight-driven microbial factories, are a promising solution to resolve energy crisis, food security, and pollution problems. The ability to recycle nutrient and CO2 fixation from waste sources makes algae a valuable feedstock for biofuels, food and feeds, biochemicals, and biomaterials. Innovative technologies such as the bicarbonate-based integrated carbon capture and algae production system (BICCAPS), integrated algal bioenergy carbon capture and storage (BECCS), as well as ocean macroalgal afforestation (OMA), can be used to realize a low-carbon algal bioeconomy. We review how algae can be applied in the framework of integrated low-carbon circular bioeconomy models, focusing on sustainable biofuels, low-carbon feedstocks, carbon capture, and advances in algal biotechnology.
Urea removal is an important process in household wastewater purification and hemodialysis treatment. The efficiency of the urea removal can be improved by utilizing activated carbon fiber (ACF) for effective urea adsorption. In this study, ACF was prepared from oil palm empty fruit bunch (EFB) fiber via physicochemical activation using sulfuric acid as an activating reagent. Based on the FESEM result, ACF obtained after the carbonization and activation processes demonstrated uniform macropores with thick channel wall. ACF was found better prepared in 1.5:1 acid-to-EFB fiber ratio; where the pore size of ACF was analyzed as 1.2 nm in diameter with a predominant micropore volume of 0.39 cm(3) g(-1) and a BET surface area of 869 m(2) g(-1). The reaction kinetics of urea adsorption by the ACF was found to follow a pseudo-second order kinetic model. The equilibrium amount of urea adsorbed on ACF decreased from 877.907 to 134.098 mg g(-1) as the acid-to-fiber ratio increased from 0.75 to 4. During the adsorption process, the hydroxyl (OH) groups on ACF surface were ionized and became electronegatively charged due to the weak alkalinity of urea solution, causing ionic repulsion towards partially anionic urea. The ionic repulsion force between the electronegatively charged ACF surface and urea molecules became stronger when more OH functional groups appeared on ACF prepared at higher acid impregnation ratio. The results implied that EFB fiber based ACF can be used as an efficient adsorbent for the urea removal process.
Dry reforming of methane (DRM) is one of the more promising methods for syngas (synthetic gas) production and co-utilization of methane and carbon dioxide, which are the main greenhouse gases. Magnesium is commonly applied in a Ni-based catalyst in DRM to improve catalyst performance and inhibit carbon deposition. The aim of this review is to gain better insight into recent developments on the use of Mg as a support or promoter for DRM catalysts. Its high basicity and high thermal stability make Mg suitable for introduction into the highly endothermic reaction of DRM. The introduction of Mg as a support or promoter for Ni-based catalysts allows for good metal dispersion on the catalyst surface, which consequently facilitates high catalytic activity and low catalyst deactivation. The mechanism of DRM and carbon formation and reduction are reviewed. This work further explores how different constraints, such as the synthesis method, metal loading, pretreatment, and operating conditions, influence the dry reforming reactions and product yields. In this review, different strategies for enhancing catalytic activity and the effect of metal dispersion on Mg-containing oxide catalysts are highlighted.
A novel approach in the design of a safe, high performance hemodialysis membrane is of great demand. Despite many advantages, the employment of prodigious nanomaterials in hemodialysis membrane is often restricted by their potential threat to health. Hence, this work focusses on designing a biocompatible polyethersulfone (PES) hemodialysis membrane embedded with poly (citric acid)-grafted-multi walled carbon nanotubes (PCA-g-MWCNTs). Two important elements which could assure the safety of the nanocomposite membrane, i.e. (i) dispersion stability and (ii) leaching of MWCNTs were observed. The results showed the improved dispersion stability of MWCNTs in water and organic solvent due to the enriched ratio of oxygen-rich groups which subsequently enhanced membrane separation features. It was revealed that only 0.17% of MWCNTs was leached out during the membrane fabrication process (phase inversion) while no leaching was detected during permeation. In terms of biocompatibility, PES/PCA-g-MWCNT nanocomposite membrane exhibited lesser C3 and C5 activation (189.13 and 5.29ng/mL) and proteins adsorption (bovine serum albumin=4.5μg/cm2, fibrinogen=15.95μg/cm2) as compared to the neat PES membrane, while keeping a normal blood coagulation time. Hence, the PES/PCA-g-MWCNT nanocomposite membrane is proven to have the prospect of becoming a safe and high performance hemodialysis membrane.
In this study, three different methods for high quality solid fuel production were tested and compared experimentally. Oil palm empty fruit bunches, mesocarp fibers, palm kernel shells and rubber seeds shells were treated using thermal (TC), hydrothermal (HTC) and vapothermal (VTC) carbonization. All thermochemical methods were accomplished by using a custom made batch-type reactor. Utilization of novel single reactor equipped with suspended internal container provided efficient operation since both steam generator and raw materials were placed inside the same reactor. Highest energy densification was achieved by VTC process followed by TC and HTC processes. The heating value enhancement in VTC and TC was achieved by the increase in fixed carbon content and reduction in volatile matter. The formation of the spherical components in HTC hydrochar which gave a sharp peak at 340 °C in the DTG curves was suggested as the reason that led to the increment in energy content.
Three short sediment cores (12-32 cm) from South China Sea off Southern Terengganu were collected during May (postNortheast monsoon) and September (pre-Northeast monsoon) 2007. The concentration of total organic carbon (TOC) obtained ranged from 0.41-2.23 and 0.38-2.31% during post and pre-monsoon, respectively. TOC concentration was found to decrease with depth and distance from the coast and river mouth. In particular, station with close proximity to the coast exhibits most pronounced variation of TOC with depth. Besides spatial variation, it is noted that the seasonal variations also considerably affect the distribution and concentrations of TOC, where both near and offshore sampling stations showed significant variations in TOC content during May and September sampling. These findings suggest the importance of terrestrial organic carbon flux, physical mixing and seasonal variations in regulating the concentration and distribution of the organic carbon in the study area.