Seafood is seen as promising for more sustainable diets. The increasing production in land-based closed Recirculating Aquaculture Systems (RASs) has overcome many local environmental challenges with traditional open net-pen systems such as eutrophication. The energy needed to maintain suitable water quality, with associated emissions, has however been seen as challenging from a global perspective. This study uses Life Cycle Assessment (LCA) to investigate the environmental performance and improvement potentials of a commercial RAS farm of tilapia and Clarias in Sweden. The environmental impact categories and indicators considered were freshwater eutrophication, climate change, energy demand, land use, and dependency on animal-source feed inputs per kg of fillet. We found that feed production contributed most to all environmental impacts (between 67 and 98%) except for energy demand for tilapia, contradicting previous findings that farm-level energy use is a driver of environmental pressures. The main improvement potentials include improved by-product utilization and use of a larger proportion of plant-based feed ingredients. Together with further smaller improvement potential identified, this suggests that RASs may play a more important role in a future, environmentally sustainable food system.
State of charge (SOC) is a crucial index used in the assessment of electric vehicle (EV) battery storage systems. Thus, SOC estimation of lithium-ion batteries has been widely investigated because of their fast charging, long-life cycle, and high energy density characteristics. However, precise SOC assessment of lithium-ion batteries remains challenging because of their varying characteristics under different working environments. Machine learning techniques have been widely used to design an advanced SOC estimation method without the information of battery chemical reactions, battery models, internal properties, and additional filters. Here, the capacity of optimized machine learning techniques are presented toward enhanced SOC estimation in terms of learning capability, accuracy, generalization performance, and convergence speed. We validate the proposed method through lithium-ion battery experiments, EV drive cycles, temperature, noise, and aging effects. We show that the proposed method outperforms several state-of-the-art approaches in terms of accuracy, adaptability, and robustness under diverse operating conditions.
Introduction: Aedes albopictus is known for its aggressiveness towards human and recently expanded to more coun- tries outside the native regions. Thus, the demographic parameters of Aedes albopictus are important to determine the characteristics of this species mosquitoes in terms of the reproduction rates and dispersal distance. Materials and Methods: This study, was performed using a Shah Alam strain of Aedes albopictus originally collected in twenty district areas of the central zone of Shah Alam. This research applies field work-study with a cross-sectional design to investigate the demographic parameters of Aedes albopictus. The demographic evaluation of Aedes albopictus was conducted under the control environment in insectarium. Results: Investigation on the demographic parameters of Aedes albopictus clearly showed that there is a significance different observed in the total number of mosquito eggs produced in both high and low incidence rate IR areas (p=0.03). In contrast, other parameters showed insignificant value between high and low IR areas. Conclusion: The key to control the mosquito vectors population is by tracking the vector’s life cycle including its survival. Therefore, the outcome of this study may provide as a baseline to esti- mate the dengue outbreak in the current episystem.
Malaysia is considered a hyperendemic area for canine heartworm (Dirofilaria immitis) due to its favorable climate for the completion of the parasite life cycle. This study provides an updated prevalence data on D. immitis in owned dogs from Kuala Lumpur, Malaysia and compares the trends of D. immitis in Malaysia. In the period between December 2017 and June 2018, 3.85% (5/130) dog blood samples tested positive for the presence of D. immitis antigen. A majority of the tested dogs (122/130) were not on rigorous heartworm prevention. After collating and analyzing information from 10 historical studies (1970-2017), we identified a significant decline in prevalence of D. immitis antigen in Malaysia, after the year 2000. Historically, the prevalence of D. immits antigen in owned dogs was significantly lower than the prevalence seen in stray dogs in Malaysia. This study demonstrates that D. immitis remains active in Kuala Lumpur, implying that accurate compliance of heartworm prevention is essential in Malaysia.
The accumulation of conventional petroleum-based polymers has increased exponentially over the years. Therefore, algae-based biopolymer has gained interest among researchers as one of the alternative approaches in achieving a sustainable circular economy around the world. The benefits of microalgae biopolymer over other feedstock is its autotrophic complex to reduce the greenhouse gases emission, rapid growing ability with flexibility in diverse environments and its ability to compost that gives greenhouse gas credits. In contrast, this review provides a comprehensive understanding of algae-based biopolymer in the evaluation of microalgae strains, bioplastic characterization and bioplastic blending technologies. The future prospects and challenges on the algae circular bioeconomy which includes the challenges faced in circular economy, issues regard to the scale-up and operating cost of microalgae cultivation and the life cycle assessment on algal-based biopolymer were highlighted. The aim of this review is to provide insights of algae-based biopolymer towards a sustainable circular bioeconomy.
The life history and the influence of environmental parameters on Thalerosphyrus were investigated in two first-order rivers-the Batu Hampar River and the Teroi River of Gunung Jerai, Kedah-in northern peninsular Malaysia. Based on nymphal body length, Thalerosphyrus was found to be trivoltine in both rivers, regardless of the altitudinal difference, but its population abundance was four times higher in the Teroi River, presumably related to its better survival in the lower water temperature. At least nine instars of Thalerosphyrus were detected in the field-collected nymphs. Its life cycle was completed within 2.5-3.0 months, with overlapping cohorts and continual emergence of up to 3 months. The main driving factors of the high abundance of Thalerosphyrus were the water temperature and habitat quality.
Ficus plants are commonly planted as ornamentals along roadsides in Malaysia. In 2010, Ficus plants in Kuala Terengganu were found to be attacked by a moth, identified as Trilocha varians. The larvae of this moth fed on Ficus leaves causing up to 100% defoliation. This study was conducted to determine the life cycle of T. varians under two different environmental temperatures and to control this pest using two different insecticides. Our findings showed that there were significant differences in the time taken for eggs to hatch and larval and pupation period between low and high environmental temperatures. Results also showed that fipronil had lower LT50 and LT95 than malathion. This study provides new information on the life history of T. varians under two different conditions and the efficiency in controlling T. varians larvae using insecticides. The results of this study are important for future management in controlling T. varians population especially in Kuala Terengganu, Malaysia.
This study aimed to analyze the environmental impacts of the oxidative desulfurization (ODS) process catalyzed by metal-free reduced graphene oxide (rGO) through life cycle assessment (LCA). The environmental impacts study containing the rGO production process, the ODS process, the comparison of different oxidants and solvents was developed. This study was performed by using ReCiPe 2016 V1.03 Hierarchist midpoint as well as endpoint approach and SimaPro software. For the production of 1 kg rGO, the results showed that hydrochloric acid (washing), sulfuric acid (mixing), hydrazine (reduction) and electricity were four main contributors in this process, and this process showed a significant impact on human health 14.21 Pt followed by ecosystem 0.845 Pt and resources 0.164 Pt. For the production of 1 kg desulfurized oil (400 ppm), main environmental impacts were terrestrial ecotoxicity (43.256 kg 1,4-DCB), global warming (41.058 kg CO2), human non-carcinogenic toxicity (19.570 kg 1,4-DCB) and fossil resource scarcity (13.178 kg oil), and the main contributors were electricity, diesel oil and acetonitrile. The whole ODS process also showed a greatest effect on human health. For two common oxidants hydrogen peroxide and oxygen used in ODS, hydrogen peroxide showed a greater impact than oxygen. On the other hand, for three common solvents employed in ODS, N-methyl-2-pyrrolidone had a more serious impact on human health followed by acetonitrile and N,N-dimethylformamide. As such, LCA results demonstrated the detailed environmental impacts originated from the catalytic ODS, hence elucidating systematic guidance for its future development toward practicality.
Magnetic actuator driven switchgear is a new medium voltage switchgear technology. In this switchgear, the conventional spring mechanism which is used to operate the circuit breaker is replaced with a magnetic actuator mechanism. The suitability of this technology in the Malaysian utility network specifically in highly loaded areas with frequent switching was assessed via a field evaluation. Preliminary results indicated that magnetic actuator driven switchgear perform commendably on the safety aspect, on-site performance monitoring and online diagnostic test results. However, there are several concerns that need to be addressed such as the ease of installation, substation system requirements, high life cycle cost and reliability of components, before this technology can be used widely.
This research aims to assess the sustainability of the most common earth-retaining walls (Gravity Walls and Cantilever Walls) in terms of environmental impacts, economic issues, and their combination. Gravity walls observed in this study consist of Gabion Wall, Crib Wall, and Rubble Masonry Wall, while Cantilever Walls include Reinforced Concrete Wall. Six different criteria were taken into account, including global warming potential, fossil depletion potential, eutrophication potential, acidification potential, human toxicity potential, and cost. To achieve the aim of this study, life cycle assessments, life cycle costs, and multi-criteria decision-making methods were implemented. The results showed that the most environmental-friendly option among all alternatives was the Gabion Wall, followed by the Rubble Masonry Wall. However, in terms of economic aspects, the Cantilever Concrete Wall was the best option, costing about 17% less than the Gabion Wall. On the other hand, the results of multi-criteria decision-making showed that the Gabion Wall was the most sustainable choice. This study addressed the research gap by carrying out a sustainability assessment of different retaining walls while considering cost and environmental impacts at the same time.
Life cycle assessments of microalgal cultivation systems are often conducted to evaluate the sustainability and feasibility factors of the entire production chain. Unlike widely reported conventional microalgal cultivation systems, the present work adopted a microalgal-bacterial cultivation approach which was upscaled into a pilot-scale continuous photobioreactor for microalgal biomass production into biodiesel from wastewater resources. A multiple cradle-to-cradle system ranging from microalgal biomass-to-lipid-to-biodiesel was evaluated to provide insights into the energy demand of each processes making up the microalgae-to-biodiesel value chain system. Energy feasibility studies revealed positive NER values (4.95-8.38) for producing microalgal biomass but deficit values for microalgal-to-biodiesel (0.14-0.23), stemming from the high energy input requirements in the downstream processes for converting biomass into lipid and biodiesel accounting to 88-90% of the cumulative energy demand. Although the energy balance for microalgae-to-biodiesel is in the deficits, it is comparable with other reported biodiesel production case studies (0.12-0.40). Nevertheless, the approach to using microalgal-bacterial cultivation system has improved the overall energy efficiency especially in the upstream processes compared to conventional microalgal cultivation systems. Energy life cycle assessments with other microalgal based biofuel systems also proposed effective measures in increasing the energy feasibility either by utilizing the residual biomass and less energy demanding downstream extraction processes from microalgal biomass. The microalgal-bacterial cultivation system is anticipated to offer both environmental and economic prospects for upscaling by effectively exploiting the low-cost nutrients from wastewaters via bioconversion into valuable microalgal biomass and biodiesel.
E-waste, encompassing discarded materials from outdated electronic equipment, often ends up intermixed with municipal solid waste, leading to improper disposal through burial and incineration. This improper handling releases hazardous substances into water, soil, and air, posing significant risks to ecosystems and human health, ultimately entering the food chain and water supply. Formal e-waste recycling, guided by circular economy models and zero-discharge principles, offers potential solutions to this critical challenge. However, implementing a circular economy for e-waste management due to chemical and energy consumption may cause environmental impacts. Consequently, advanced sustainability assessment tools, such as Life Cycle Assessment (LCA), have been applied to investigate e-waste management strategies. While LCA is a standardized methodology, researchers have employed various routes for environmental assessment of different e-waste management methods. However, to the authors' knowledge, there lacks a comprehensive study focusing on LCA studies to discern the opportunities and limitations of this method in formal e-waste management strategies. Hence, this review aims to survey the existing literature on the LCA of e-waste management under a circular economy, shedding light on the current state of research, identifying research gaps, and proposing future research directions. It first explains various methods of managing e-waste in the circular economy. This review then evaluates and scrutinizes the LCA approach in implementing the circular bioeconomy for e-waste management. Finally, it proposes frameworks and procedures to enhance the applicability of the LCA method to future e-waste management research. The literature on the LCA of e-waste management reveals a wide variation in implementing LCA in formal e-waste management, resulting in diverse results and findings in this field. This paper underscores that LCA can pinpoint the environmental hotspots for various pathways of formal e-waste recycling, particularly focusing on metals. It can help address these concerns and achieve greater sustainability in e-waste recycling, especially in pyrometallurgical and hydrometallurgical pathways. The recovery of high-value metals is more environmentally justified compared to other metals. However, biometallurgical pathways remain limited in terms of environmental studies. Despite the potential for recycling e-waste into plastic or glass, there is a dearth of robust background in LCA studies within this sector. This review concludes that LCA can offer valuable insights for decision-making and policy processes on e-waste management, promoting environmentally sound e-waste recycling practices. However, the accuracy of LCA results in e-waste recycling, owing to data requirements, subjectivity, impact category weighting, and other factors, remains debatable, emphasizing the need for more uncertainty analysis in this field.
The ultrastructure of the odontoblast reflects the certain phases that the cell undergoes in their lifecycle. Ultrastructure studies of the odontoblasts have often been carried out using young teeth. In this study, teeth from an older individual have been used to study the odontoblasts from the crown and root area. The odontoblasts from the crown area retain their columnar shape while odontoblasts from the root area appeared to be flattened. The organelles present in the odontoblasts either from the crown or root area was observed to be reduced.
Archerfishes Toxotes chatareus (Hamilton 1822) and Toxotes jaculatrix (Pallas 1767) inhabits mangrove estuaries, which are a critically important habitat as a spawning and nursery ground as well as the full life cycle of many fish species. In order to manage and conserve resilience fish species like the archerfish, we need to know some basic parameters about their biology and life history. Our research has focused on understanding the annual condition factors of these two species of archerfishes, as a complimentary to other several biological aspects of this two species that have been published. Our results indicated that, both species are in good conditions as the mean values of condition factors (Fulton condition factor K and Relative condition factor Kn) are greater than values of unity (K, Kn >1). The average K and Kn values of T. chatareus and T. jaculatrix were lowest in November and highest in September, indicates the spawning and recovery condition of the fishes. Condition factors measure overall fish population health that can be used by fisheries biologists and resource managers in proper management of fish resources in Malaysia waters.
Soil-transmitted intestinal worms known as helminths colonize over 1.5 billion people worldwide. Although helminth colonization has been associated with altered composition of the gut microbiota, such as increases in Clostridia, individual species have not been isolated and characterized. Here, we isolate and sequence the genome of 13 Clostridia from the Orang Asli, an indigenous population in Malaysia with a high prevalence of helminth infections. Metagenomic analysis of 650 fecal samples from urban and rural Malaysians confirm the prevalence of species corresponding to these isolates and reveal a specific association between Peptostreptococcaceae family members and helminth colonization. Remarkably, Peptostreptococcaceae isolated from the Orang Asli display superior capacity to promote the life cycle of whipworm species, including hatching of eggs from Trichuris muris and Trichuris trichiura. These findings support a model in which helminths select for gut colonization of microbes that support their life cycle.
The estimation of the postmortem interval (PMI) is an essential information in death investigations. It is necessary to know the developmental data of the most important necrophagous insect species in every geographical area. Chrysomya megacephala (Fabricius, 1794) (Diptera: Calliphoridae) is one of the most common species associated with human body decomposition, especially in the tropics, so a precise knowledge of its life cycle is crucial. However, despite its ubiquity, developmental data in a range of tropical temperatures is scarce. For this reason, the aim of this study is to provide the developmental data of the blowfly, C. megacephala, in a range of tropical temperatures and to apply these data in forensic entomology. Four temperatures were examined (i.e., 27.0°C 29.5°C, 32.0°C and 34.5°C) and the time of developments from egg to adult were recorded. To build the growth curves, five larvae per day were measured with a digital caliper. Accumulated degree-days were calculated and the isomorphen diagram for this species was plotted. As we predicted, the results showed that the life cycle of this species was affected by the increasing temperature. The implications of these new data for determining the minimum PMI in forensic entomology were discussed.
Material synthesis requires an enormous amount of organic solvents which leads to huge environmental burdens. Being so, the necessity to utilize non-toxic chemicals is of growing interest in the global market. Harnessing a green fabrication strategy could be a sustainable remedy. Herein, life cycle assessment (LCA) and techno-economic assessment (TEA) using a cradle-to-gate approach to select the green synthesis route for the production of main components in mixed matrix membranes such as polymer and fillers were studied. Five representative synthesis routes of polymers of intrinsic microporosity (PIM-1) and fillers such as UiO-66-NH2 (UiO: University of Oslo) were conducted. Our findings revealed that the tetrachloroterephthalonitrile (TCTPN) synthesized PIM-1 using a novel approach (e.g., P5-Novel synthesis) and solvent-free synthesized UiO-66-NH2 (e.g., U5-Solvent-free) demonstrated the least environmental impact and are most economically feasible. The environmental burden and cost of PIM-1 synthesized by P5-Novel synthesis route decreased by 50 % and 15 %, respectively, while that of UiO-66-NH2 produced via U5-Solvent-free route reduced by 89 % and 52 %, respectively. Additionally, solvent reduction was found to have an apparent effect on cost-saving, whereby the production cost declined 13 % with a 30 % solvent reduction. Alleviation of environmental burdens could also be found through recovering solvents or substituting with a greener alternative (e.g., water). The fundamentals gained on the environmental impacts and economic feasibility of PIM-1 and UiO-66-NH2 production from this LCA-TEA study may provide a preliminary evaluation for the development of green and sustainable materials.
Different clades belonging to the cosmopolitan marine diatom Pseudo-nitzschia pungens appear to be present in different oceanic environments, however, a 'hybrid zone', where populations of different clades interbreed, has also been reported. Many studies have investigated the sexual reproduction of P. pungens, focused on morphology and life cycle, rather than the role of sexual reproduction in mixing the genomes of their parents. We carried out crossing experiments to determine the sexual compatibility/incompatibility between different clades of P. pungens, and examined the genetic polymorphism in the ITS2 region. Sexual reproduction did not occur only between clades II and III under any of experimental temperature conditions. Four offspring strains were established between clade I and III successfully. Strains established from offspring were found interbreed with other offspring strains as well as viable with their parental strains. We confirmed the hybrid sequence patterns between clades I and III and found novel sequence types including polymorphic single nucleotide polymorphisms (SNPs) in the offspring strains. Our results implicate that gene exchange and mixing between different clades are still possible, and that sexual reproduction is a significant ecological strategy to maintain the genetic diversity within this diatom species.
The life-cycle of Malaysian Spirometra spp. was studied under experimental conditions in the laboratory. The Cyclops were reared as the first intermediate host, the hamster as the experimental second intermediate host and cat as the definitive host. Maturation and hatching of eggs took 6 to 12 days by incubation at temperature 30 ºC. The hatched coracidium measured 46 x 34 μm. The Cyclops used were susceptible to the coracidial infection. The procercoid older than 5 days in the Cyclop body cavity had minute spines at the anterior end, calcium corpuscles in the body parenchyma and the cercomer at the posterior end. Procercoids 10 to 14 days old were infective to hamster. The plerocercoids from the hamster after 30 days were long and slender and were infective to cats. The plerocercoids experimentally inoculated to cats developed to adult worms and began to produce eggs between 10 to 60 days. Based on the results that have been obtained, a complete life-cycle was successfully elucidated in the laboratory and hamster was identified to be a good laboratory model for a second intermediate host of Spirometra sp.
Larvae of the Synthesiomyia nudiseta (Wulp) were collected from a decomposed human corpse at the Department of Forensic Medicine, Penang Hospital. A colony of this species was established and the eggs were collected for rearing. The developmental times, rearing temperatures, and relative humidity were recorded twice daily from the time the eggs collected until adult emergence. An average of 5 larvae were randomly collected from the rearings twice daily, warm-water killed and preserved in Kahle's solution. The larval instar stages were determined by observing the number of posterior spiracular slits and the length of the preserved larvae were measured. When the larval life cycle was completed, the accumulated developmental times were calculated. A total of 8 replicates were carried out. The temperature of the rearing room was 28.5+/-1.5 degrees Celcius while the relative humidity was within 67-85%. The total developmental time for S. nudiseta was 322+/-19 hours (13.4+/-0.8 days).