This study aims to determine the combined effects of hydrolysis time, temperature, pH and ratio of enzyme to substrate on the degree of hydrolysis (DH) of silver catfish frame using Response Surface Methodology. The proximate compositions of silver catfish frame and silver catfish hydrolysate powder were determined as well. The effects of independent factors were described using a three-level factors Face Centered Central Composite design. The suggested hydrolysis conditions for obtaining the optimum DH using Alcalase® were – temperature of 55oC, hydrolysis time of 163 min, pH of substrate at 9.45 and an enzyme concentration of 2.0%. The generated model showed a quadratic fit with experimental data. Proximate analyses revealed that silver catfish frame contained 25.02% protein, 68.21% fat and 7.08% ash. While silver catfish frame hydrolysate powder contained 65.05% protein, 32.92% fat and 0.86% ash. The protein recovery in silver catfish frame hydrolysate was as high as 71.6%.
This study aimed to determine the biofilm formation ability by Salmonella Typhi on cucumber, mango and guava surface, as well as to determine the relationship between time contact and biofilm formation. Crystal violet assay was performed to quantify the biofilm formation based on the value of optical density at 570 nm of the destaining crystal violet at the specific interval time. The result showed that the attachment of the bacterial cells on the fresh produce surface increased with the contact time. The readings of OD570at time 12 h for cucumber, mango and guava surfaces were 0.824, 0.683 and 0.598, respectively, indicating that the biofilm formation by Salmonella Typhi on different fresh produce surface varied with time. Since the result showed that Salmonella Typhi formed biofilm on fresh produce surfaces, hygienic practice from farm to fork including handling, processing, distribution and storage of the fresh produce should be of concern.
Tissue regeneration is a rapidly growing field providing a beacon of hope in the field of restorative and endodontics. Root canal treatment involves the removal of pulp tissue and replacement by an inorganic materials where as regenerative endodontics deals with replacement with healthy pulp to revitalize the teeth .Research in the field of tissue engineering and material science have lead to significant progress but still is plague with lots of drawbacks and failures, hence it is still not being adapted as routine clinical procedures .The purpose of this article is to review the advances made in regenerative endodontics and the future scopes.
Objective: This case report highlights on the challenges in the management of people with bipolar disorder. Method: We report a case of 36 year-old lady living with this disorder and her journey in a search for a meaningful life. Result: Adherence to treatment is a major determinant of outcome in bipolar patient like Ms WMY. Poor insight, negative attitudes towards treatment and poor understanding of medications and the illness can all lead to reduced adherence. Conclusion: This case demonstrates on how poverty of insight, poor social support, on-going stressors with significant life events and poor compliance to treatment create a series of stumbling blocks in recovery from bipolar disorder.
Silicon nanostructures have successfully been synthesized by thermal evaporation technique using nickel catalyst. Silicon powder served as starting source material was evaporated at high temperature (900-1100°C) in inert carrier gas. The grown silicon nanostructures were collected on (111) silicon substrate surface that positioned at varied location from source material. By controlling heating rate, gas flow rate, growth temperature and time, substrate position and location; to the optimum condition produced the best quality at silicon nanostructures. In this work, the best parameter to produce silicon nanostructures is system ramping up 1000°C at 20°C/min heating rate, N2 flow at 100ml/min; silicon needle-like one dimensional silicon nanostructures growth on vertically-positioned substrate located at 12cm from source material for 1 hour growth time. The effects of these parameters on the structures and physical of nanostructures were characterized by field emission scanning electron microscope and x-ray diffraction.
The objective of this research is recovery of squalene from palm fatty acid distillate (PFAD) using supercritical fluid extraction (SFE). The extraction process was performed by using the SFE and recovered squalene was analyzed from total lipid extracts using HPLC. A central composite design was used to study the effect of SFE variables namely pressure (X₁) from 200 to 400 bar and temperature (X₂) from 40 to 60⁰C on the total lipid extracts (Y₁) and squalene concentration (Y₂) and optimize the SFE conditions. The nonlinear regression equations were significantly (p < 0.05) fitted for both responses with high R₂ (> 0.965), which had no indication of lack of fit. The results indicated that a combined pressure (200 bar) and temperature (50⁰C) was predicted to provide the optimum region in terms of total lipid extracts (13.84 ± 0.52%) and squalene concentration (418.31 ± 18.40 ppm) studied.
Transition metals play an important role in the growth of carbon nanotubes (CNTs). Series of unsupported hybrid catalysts consisting of Ni:Cu, Ni:Cr, and Ni:Mn doped with Nd catalyst, respectively were synthesized by impregnation method. The catalytic performance of the catalyst for the production of CNTs was measured in the pyrolysis process of hydrocarbon source by catalytic chemical vapour deposition method. Acetylene gas was used as the source of carbon in the pyrolysis process. The decomposition of acetylene was carried out at 700ºC. The bulk properties of the catalysts were investigated by X-ray diffraction. Field emission scanning electron microscopy and thermal analysis were used to observe the morphology and thermal stability of the as-synthesized CNTs, respectively. Hybrid catalyst of Ni:Mn/Nd and Ni:Cr/Nd in 3:1 atomic ratio gave high percentage of carbon yield which was assigned for the high production of CNTs with the mass of yield 18 times greater than the initial mass of the catalyst used.
This study was performed to enumerate the total viable cell count of probiotic in five brands (A to E) of commercially cultured milk drinks that are available in the Malaysian market as well as to test their tolerance to various pH and bile concentrations by simulating the human gastrointestinal pH and bile concentration. The acid tolerance test was studied under pH 1.5 and 3.0 with 7.2 as control. The cell count for the acid tolerance test was obtained at an interval of 0, 1.5 and 3 hours respectively and was plated onto duplicate MRS agars to be incubated at 37°C for 48 hours. All cells recovered after 3 hours of pH treatment were selected for bile tolerance test in MRS broth containing bile concentrations of 0% (control), 0.3% and 2.0% and cell counts were recorded after 24 hours of incubation. The probiotic strains in products A, B, C & D met the suggested initial count of 106 CFU/ml with brand C recording the highest at 9.19 ± 0.14 log CFU/ml. Strains in product A, B & C showed good tolerance to pH 3.0 and 7.2 recording a count of >106 CFU/ml after 3 hours with a range of 6.60 – 9.04 log CFU/ml. The higher bile concentrations resulted in lower growth of strains in all the brands. Upon pH 1.5 treatment, only brand C recorded growth in all bile concentrations. After pH 3.0 treatment, all brands except brand E met the requirement of survival at 0.3% bile concentration. Results showed probiotics in product A, B & C met the initial count requirement, and exhibited good acid and bile tolerance therefore being a potentially good source of probiotic.
This research was carried out to determine the fructooligosaccharides content in local honey samples, namely the wild Malaysian Tualang honey and common wild honey obtained from Tapah, Perak and a commercial Tualang honey. Local wild honeys were found to contain a higher concentration of fructooligosaccharides (FOS) compared to the commercial Tualang honey. The FOS quantified from local wild honeys was inulobiose, kestose and nystose. Nystoses were found at a very low amount in the commercial Tualang honey. The effects of honey on the growth of Bifidobacterium longum BB 536 were investigated. Both wild and commercial honey samples including FOS standard were found to support the growth of B. longum. The pH value of the skim milk + honey inoculated with the probiotic strain decreases as expected. Addition of honey was found to support the growth of B. longum BB 536.
Raw goat milk is recognized as one kind of nutritious food owed to its originality and
medicinal values. This study aimed to evaluate the physico-chemical and microbiological
qualities of locally produced raw goat milk prior any processing steps during storage. Milk
samples passed organoleptic test and C.O.B. test were mostly (88.89 %) failed in alcohol test.
AOAC Official method of oven drying method, Kjeldahl method and Soxhlet method were
performed in physico-chemical analysis where results obtained were partially in lined with
reported literature due to subjective factors of breeds, geographical areas and feeds. The locally
produced raw goat milk’s compositions are high in water content and low in fat percentage.
Initial total plate count, coliform count and proteolytic count tested were 3.44 log cfu/ml, 1.87
log cfu/ml and 1.97 log cfu/ml, respectively. Storage time showed significant effect on the
bacterial counts (p>0.05) of milk samples. Shelf-life of milk samples were kept up to 12 hours
under ambient temperature (3.95 log cfu/ml) had not exceeded the standard limit. The shelflife
of the milk samples were extended up to 16 days storage under refrigerated temperature
of 4°C. The microbiological quality of the milk samples showed a significant bacteriological
growth upon prolonged storage and high initial coliform count indicates possible poor hygienic
practices at farm level.
This short report aims to describe the Circle of Care (COC) Project in Malaysia. This is an example of smart partnership between the Malaysian Psychiatric Association (MPA) and Johnson and Johnson which began in 2003. By means of philanthropic funds from an industrial company, many people have benefited in many different aspects through the project. It consists of three main psychosocial activities: education and support programme for carers and families of people with mental illness; psychosocial rehabilitation for patients with mental illness; and mass education for the people in promoting mental health and prevention of mental health problems and illness. To date, the project has either fully or partially funded hundreds of activities along the line of these three objectives. While there has been growth of psychosocial interventions in the country contributed by the project, it is faced with a few challenges which are becoming the next focus of actions of MPA.
The presence of 226 Ra in water is a great concern in human life since it can cause health risk to a certain extent. In the state of Kelantan, being known of its granitic area, there is a lack measurement of 226 Ra content in river water, since water is the major source of water supply. According to the INTERIM National Water Quality Standards for Malaysia (INWQS), 226 Ra activity concentration in water cannot exceed 0.1 Bq/L. For this reasons, this research was planned to carry out a systematic measurement of water along Sungai Kelantan. Liquid Scintillation Counting was used for measurement of 226 Ra in water samples from Sungai Kelantan mainly in district of Kuala Krai. In this paper, the results obtained is about 26 water samples, filtered and unfiltered, collected along Sungai Lebir, Sungai Sok and Bukit Sabah. Thus, the assessment activity concentration of 226 Ra in river water was obtained as well as annual effective dose for consumption of drinking water.
Detection and analysis of resin is particularly significant since the commercial value of agarwood is related to the quantity of resins that are present. This article explores the potential of a scanning electron microscope in combination with new non-destructive 3D visualization technique, X-ray micro-computed tomography, as imaging tools to visualize micro-structure resin in agarwood. These techniques were used to compare two samples of agarwood chips: high grade and low grade. From the results, it can be concluded that a wood cell filled with resin deposit have a higher attenuation. It can be shown that the combination of scanning electron microscopy and micro-CT can offer high resolution images concerning the localization and structure of resin inside Agarwood. While the second allows the 3D investigation of internal structure of agarwood, the first technique can provide details 2D morphological information. These imaging techniques, although sophisticated can be used for standard development especially in grading of agarwoodlbr commercial activities.
Kenaf fibre that is known as Hibiscus cannabinus, L. family Malvaceae is an herbaceous plant that can be grown under a wide range of weather conditions. The uses of kenaf fibres as a reinforcement material in the polymeric matrix have been widely investigated. It is known that epoxy has a disadvantage of brittleness and exhibits low toughness. In this research, liquid epoxidized natural rubber (LENR) was introduced to the epoxy to increase its toughness. Kenaf fibres, with five different fibre loadings of 5%, 10%, 15%, 20% and 25% by weight, were used to reinforce the epoxy resins (with and without addition of epoxidized natural rubber) as the matrices. The flexural strength, flexural modulus and fracture toughness of the rubber toughened epoxy reinforced kenaf fibre composites were investigated. The results showed that the addition of liquid epoxidized natural rubber (LENR) had improved the flexural modulus, flexural strength and fracture toughness by 48%, 30%, and 1.15% respectively at 20% fibre loading. The fractured surfaces of these composites were investigated by using scanning electron microscopic (SEM) technique to determine the interfacial bonding between the matrix and the fibre reinforcement.
The aim of this study was to investigate the effects of a two week reduction in training load on selected physiological and performance among junior cyclist. Twenty seven male junior cyclists (age= 16.6±0.7 years, height=165.6±6.1 cm, weight= 54.1±8.1 kg) were matched into either the control group (n=13) or the experimental group (n=14) using their initial VO2max values. Both groups followed a 12-week progressive endurance training program and subsequently, the experimental group (EXP) engaged in a two week tapering (recovery via a reduction in training loads) phase. The control group continued with their normal training routine. A simulated 20 km time trials performance and a graded exercise test on cycle ergometer were performed before and after endurance training and after the two week tapering protocol. Following the conclusion of the two week intervention or no intervention program both groups undertook a TT20km. Results showed no significant difference in the TT20km performance. Compared to the CON group, the EXP group showed significant changes in all the selected physiological variables tested, p
This study aimed to analyze consumers’ perceptions and acceptance toward ‘belacan’. Results
showed internal reliability of above 0.7 for sections analyzed. Factor analysis found two underlying factors in the section designed to examine consumers’ perceptions. The overall consumers’ perception had a positive and moderate correlation with their acceptance and was significant at .01. Results also showed that ‘belacan’ consumption level was relatively frequent and well accepted by all races in Malaysia. The findings of the study would be noteworthy to the fishery industry and the small and medium industry (SME) in Malaysia in meeting consumers’ needs.
Amitraz poisoning is rare and there has been no reported cases in the Malaysian literature. Ingestion of this compound carries many life threatening side effects. We describe a case of Amitraz poisoning in an 18 years old young adult. He developed hypotension, required ventilatory support and a day of intensive care unit stay. He had a quick recovery after he was treated symptomatically and was discharged well after 3 days.
Neck abscess is still common in developing countries. Often the presentation is late especially when the pain becomes intolerable or the airway is compromised. Intramuscular abscess in the neck is very rarely encountered. We report a case of an abscess of the right sternocleidomastoid. The culture grew Proteus mirabilis. The outline of management is discussed.
It is ironical to realize that a perfect and free nutritional product, individually produced and naturally distributed to all families, is not universally used. This product is of course breast milk that nurtures the optimal health, growth and development of the human young. Breast milk also protects infants and young children from and prevents diseases in the short and long term. (Copied from article)
Texture evolution of NiO formed during oxidation of polycrystalline single oriented (100) Ni-Cr was investigated. This foil was also termed rolling assisted biaxially textured substrate (RABiTS). X-ray diffractograms of oxidized Ni-Cr RABiTS foil showed the existence of mostly (200) NiO indicating (100)-type NiO formed exclusively on (100) singly oriented Ni-Cr grains. Epitaxial relationship between the two layers is observed. However the dual-in-plane texture was recorded.
The in-plane texture was assessed by conducting phi scan and plotting series of pole figures measured at (111) NiO peak. The mechanism of the oxides formation was proposed to take into account the formation of (100)-type NiO. Cross section morphology of the oxidised foils reveals two oxidation layers; fast growing external layer consisting of the (100)-type NiO and an internal layer consisted of mostly Cr2O3 and maybe NiCr2O4. The thickness of NiO was ~ 10Pm. Cr2O3 formed as needle-like oxides embedded in a matrix of Ni foil. Inward diffusion of oxygen is believed to have caused this to happen. The external NiO layer was consisted of duplex microstructure characterised by columnar layer growing vertical on the surface of the metal and a few micron thick of equiaxed NiO. Delamination of the outer NiO layer often occurred at the columnarequiaxed interface which could be cured by CeO2 deposition on the foil prior to the oxidation process. CeO2 was deposited by conversion immersion using Ce(NO3)3.6H2O solution. (200) NiO formed on this coated sample as well.