Phenotypic selection of individuals is the first step in a selective breeding program for elite hybrid seed production. In
this study, a total of 295 Jatropha curcas individuals raised from cuttings representing 21 accessions, collected from eight
different countries were evaluated for growth performance. The evaluation was done at the Biodiesel Research Station
of Universiti Kebangsaan Malaysia, Kuala Pilah from December 2012 to December 2013. Individual plants from each
accession were observed on several agronomic and yield related traits and all the data were recorded periodically.
Performance of each accession was analyzed using Statistical Analysis System (SAS) 9.4. Four traits which were plant
height (PH), number of flowers per inflorescence (NFI), number of female flowers per inflorescence (NFFPI) and hundred
seed weight (HSW) showed significant differences among the accessions after one year of planting. Maximum values for
each trait were 115.5 cm for PH, 6 for number of branches per plant (BPP), 9 for number of inflorescences per plant
(NIPP), 25 for number of fruits per plant (NFPP), 5 for number of fruits per inflorescence (NFPI), 191 for NFI, 10 for
NFFPI, 81.0 g for HSW and 70 for number of seeds per plant (NSPP). Accession number 1 from Thailand showed the best
performance for most traits. A highly significant and positive correlation was found between NFPP and NSPP. Based on
superior trait values for NIPP, NFPP, NFPI, NFI, NFFPI and HSW, five plants from accession UKMJC 01, 04, 05, 13 and 14
have been selected for generating elite intraspecific hybrids.
The issue of age difference in hospital admission should be given special attention since it affects the structure of hospital care and treatments. Patients of different age groups should be given different priority in service provision. Due to crucial time and limited resources, healthcare managers need to make wise decisions in identifying priorities in age of admission. This paper aimed to propose a construction of a daily composite hospital admission index (CHAI) as an indicator that captures relevant information about the overall performance of hospital admission over time. It involves five different age groups of total patients admitted to seven major public hospitals in the Klang Valley, Malaysia for respiratory and cardiovascular diseases for a period of three years, 2008 - 2010. The criteria weights were predetermined by aggregating the subjective weight based on rank ordered centroid (ROC) method and objective weight based on entropy - kernel method. The highest and lowest scores of CHAI were marked, while the groups of patients were prioritized according to the criteria weight ranking orders.
Otoliths, which can be used for the evaluation of relationships between the environment and organisms, are structures
consisting of calcium carbonate. The aim of this study was to realize the shape analysis. In addition, it is to detect the
characteristics of otolith biometrics in order to determine the relationship between the fish size of Engraulis encrasicolus
L. from the Black and Marmara Seas. The samples were obtained from the Black and Marmara Seas between December
2013 and February 2014. The relationships between the TL (Total length) and OL (Otolith length), TL and OB (Otolith
breadth), and TL and OW (Otolith weight) were determined using the linear regression equation. Form factor, roundness,
circularity and rectangularity were used for shape analyses. According to the data, there was no difference between
localities (p>0.05). Moreover, there was no difference between the left and right otoliths of the individuals sampled from
the same locality (p>0.05). According to the regression coefficient for relationships of TL-OL, TL-OB and TL-OW, otolith
length was identified as the best index for estimating fish length (r
2
>0.70). It showed that index values were statistically
different between two populations (p<0.001).
A total of 341 fertilized and 37 unfertilized oocytes from 63 intracytoplasmic sperm injection (ICSI) treatment cycles were included for retrospective assessment using the Embryoscope time-lapse video system. The second polar body (pb2) extrusion occurred at 2.9±0.1 h (range 0.70-10.15 h) relative to sperm injection. All oocytes reduced in size following sperm injection (p<0.05) with shrinkage ceasing after 2h in the unfertilized and at pb2 extrusion in the fertilized oocytes. Pb2 extrusion was significantly delayed for women aged >38 years compared to those <35 years (3.4±0.2 vs. 2.8±0.1, p<0.01) or 35-38 years (3.4±0.2 vs. 2.8±0.1, p<0.01), but timing was not related to the Day 3 morphological grades (1-4) of subsequent embryos (2.9±0.1, 2.9±0.1, 2.8±0.2 and 3.0±0.1; p>0.05 respectively). A shorter time of first cleavage division relative to either sperm injection or pb2 extrusion is associated with both top grade (AUC=0.596 or 0.601, p=0.006 or 0.004) and usable embryos (AUC=0.638 or 0.632, p=0.000 respectively) on Day 3. In summary, (i) pb2 of human oocytes extrudes at various times following sperm injection, (ii) the timing of pb2 extrusion is significantly delayed when female age >38 years, but not related to subsequent embryo development, (iii) all human oocytes reduce in size following sperm injection, (iv) completion of pb2 extrusion in the fertilized oocytes is a pivotal event in terminating shrinkage of the vitellus, and (v) time to first cleavage division either from sperm injection or pb2 extrusion is a significant predictive marker for embryo quality on Day 3.
Enhanced muscle strength is seen when resistance exercise is combined with the consumption of nutritional supplements. Although there is a limited number of studies available about the efficacy of gamma oryzanol supplementation with resistance exercise in humans, but its usage as a nutritional supplement for strength is common in athletes. The aim of this study was to determine the effects of gamma oryzanol supplementation during 9-week resistance training on muscular strength and anthropometric measurements of young healthy males.
Some diseases may underlie finger clubbing. However, there is a dearth of information about early stage of finger clubbing because only few researchers have shown interest in it. We determined the Digital Index of normal, healthy subjects by using thread and manual Vernier calipers, the time used for the procedure, and its interrater reliability. The value of Digital Index was 8.86 ± 0.29 (Mean ± SD) with a range of 8.15 to 9.41. Interrater reliability was excellent with Pearson's correlation coefficient of 0.966. Overall, the time taken to measure the Digital Index ranged from 21.93 to 68.80 minutes with an average of 35.97 ± 9.16 (Mean ± SD). Determining Digital Index need much time, but this can be overcome if we use Digital Index Quantitator (DIQ). Availability of DIQ in the hospital wards will be of much benefit. DIQ can also be used to accurately quantify the progression or regression of the clubbing process. This article proves that we need morphometry of digital clubbing as well as the correlation of the physical sign of clubbing with Digital Index.
The objectives of this study were to investigate whether severity of clubfoot, age, and weight of the patients at initial manipulation and casting influence the total number of castings required.
Soft biometrics can be used as a prescreening filter, either by using single trait or by combining several traits to aid the performance of recognition systems in an unobtrusive way. In many practical visual surveillance scenarios, facial information becomes difficult to be effectively constructed due to several varying challenges. However, from distance the visual appearance of an object can be efficiently inferred, thereby providing the possibility of estimating body related information. This paper presents an approach for estimating body related soft biometrics; specifically we propose a new approach based on body measurement and artificial neural network for predicting body weight of subjects and incorporate the existing technique on single view metrology for height estimation in videos with low frame rate. Our evaluation on 1120 frame sets of 80 subjects from a newly compiled dataset shows that the mentioned soft biometric information of human subjects can be adequately predicted from set of frames.
Matched MeSH terms: Body Weights and Measures/methods*
BACKGROUND: This study was to investigate the prevalence of single nucleotide polymorphisms (SNPs) in leptin gene LEP (A19G and G2548A) and leptin receptor gene LEPR (K109R and Q223R) and their association with fasting plasma leptin level (PLL) and obesity in a Malaysian suburban population in Kampar, Perak.
METHODS: Convenience sampling was performed with informed consents, and the study sample was drawn from patients who were patrons of the Kampar Health Clinic. A total of 408 subjects (mean age, 52.4 +/- 13.7 years; 169 men, 239 women; 190 obese, 218 non-obese; 148 Malays, 177 ethnic Chinese, 83 ethnic Indians) participated. Socio-demographic data and anthropometric measurements were taken, and genotyping was performed using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP).
RESULTS: The LEP A19G, G2548A and LEPR K109R, Q223R variant allele frequencies were 0.74, 0.67 and 0.61, 0.79, respectively. The genotype and allele distributions of these gene variants were significantly different among ethnic groups, but not among body mass index (BMI) classes. Subjects with LEPR K109 and Q223 allele had significantly higher systolic blood pressure and adiposity indices after adjustment for ethnicity (higher BMI, total body and subcutaneous fat; lower skeletal muscle percentage). Subjects with LEPR 109R allele had lower PLL than their wild-type allele counterparts. The influence of LEP A19G and G2548A SNPs on blood pressures, anthropometrics, and PLL was not evident. Interestingly, synergistic effect of the LEP and LEPR SNPs was observed as subjects homozygous for all four SNPs studied exhibited significantly higher subcutaneous fat and PLL than those with other genotype combinations.
CONCLUSIONS: The LEP and LEPR SNPs in this study may not be an obesity marker among Malaysians in this population, but were associated with ethnicity. Our findings suggest that each of these SNPs contributes to minor but significant variation in obesity-related traits and in combination they display synergistic effects on subcutaneous fat and PLL.
The family Poritidae formerly included 6 genera: Alveopora, Goniopora, Machadoporites, Porites, Poritipora, and Stylaraea. Morphologically, the genera can be differentiated based on the number of tentacles, the number of septa and their arrangement, the length of the polyp column, and the diameter of the corallites. However, the phylogenetic relationships within and between the genera are unknown or contentious. On the one hand, Alveopora has been transferred to the Acroporidae recently because it was shown to be more closely related to this family than to the Poritidae by previous molecular studies. On the other hand, Goniopora is morphologically similar to 2 recently described genera, Machadoporites and Poritipora, particularly with regard to the number of septa (approximately 24), but they have not yet been investigated at the molecular level. In this study, we analyzed 93 samples from all 5 poritid genera and Alveopora using 2 genetic markers (the barcoding region of the mitochondrial COI and the ITS region of the nuclear rDNA) to investigate their phylogenetic relationships and to revise their taxonomy. The reconstructed molecular trees confirmed that Alveopora is genetically distant from all poritid genera but closely related to the family Acroporidae, whereas the other genera are genetically closely related. The molecular trees also revealed that Machadoporites and Poritipora were indistinguishable from Goniopora. However, Goniopora stutchburyi was genetically isolated from the other congeneric species and formed a sister group to Goniopora together with Porites and Stylaraea, thus suggesting that 24 septa could be an ancestral feature in the Poritidae. Based on these data, we move G. stutchburyi into a new genus, Bernardpora gen. nov., whereas Machadoporites and Poritipora are merged with Goniopora.
OBJECTIVE: The unavailability of anthropometric data especially in developing countries has remained a limiting factor towards the design of learning facilities with sufficient ergonomic consideration. Attempts to use anthropometric data from developed countries have led to provision of school facilities unfit for the users. The purpose of this paper is to use factor analysis to investigate the suitability of the collected anthropometric data as a database for school design in Nigerian tertiary institutions.
PARTICIPANTS: Anthropometric data were collected from 288 male students in a Federal Polytechnic in North-West of Nigeria. Their age is between 18-25 years.
METHODS: Nine vertical anthropometric dimensions related to heights were collected using the conventional traditional equipment. Exploratory factor analysis was used to categorize the variables into a model consisting of two factors. Thereafter, confirmatory factor analysis was used to investigate the fit of the data to the proposed model.
RESULTS: A just identified model, made of two factors, each with three variables was developed. The variables within the model accounted for 81% of the total variation of the entire data. The model was found to demonstrate adequate validity and reliability. Various measuring indices were used to verify that the model fits the data properly. The final model reveals that stature height and eye height sitting were the most stable variables for designs that have to do with standing and sitting construct.
CONCLUSION: The study has shown the application of factor analysis in anthropometric data analysis. The study highlighted the relevance of these statistical tools to investigate variability among anthropometric data involving diverse population, which has not been widely used for analyzing previous anthropometric data. The collected data is therefore suitable for use while designing for Nigerian students.
KEYWORDS: Exploratory factor analysis; measurement model; school ergonomics
The aim of this study was to investigate the effects of a two week reduction in training load on selected physiological and performance among junior cyclist. Twenty seven male junior cyclists (age= 16.6±0.7 years, height=165.6±6.1 cm, weight= 54.1±8.1 kg) were matched into either the control group (n=13) or the experimental group (n=14) using their initial VO2max values. Both groups followed a 12-week progressive endurance training program and subsequently, the experimental group (EXP) engaged in a two week tapering (recovery via a reduction in training loads) phase. The control group continued with their normal training routine. A simulated 20 km time trials performance and a graded exercise test on cycle ergometer were performed before and after endurance training and after the two week tapering protocol. Following the conclusion of the two week intervention or no intervention program both groups undertook a TT20km. Results showed no significant difference in the TT20km performance. Compared to the CON group, the EXP group showed significant changes in all the selected physiological variables tested, p
The combustion characteristics of refuse derived fuel (RDF) in a fluidized bed have been studied. The gross heating value (GHv) of the RDF was 14.43 MJIkg with moisture content of 25% by weight. Parameters of interest for sustainable bed combustion were the fluidization number and primary air factor. The study was performed in a rectangular fluidized bed combustor with dimensions of 0.3 m in width, 0.7 m in length and 2 m in height. Sand with mean particle size of 0.34 mm was used as a fluidization medium. The sand bed height was at 0.3 m above the standpipes air distributor. The range of fluidization number under investigation was 5-7 II fin which 5 II newas found to be the optimum. The study was continued for the determination of the optimum primary air factor with the selected range of primary air factors being 0.6, 0.8, 1.0 and 12 in experiments conducted at 5 Unit The final results showed that the optimum primary air factor was at 0.8. An energy balance was also performed to determine the thermal efficiency of the combustion. It was concluded that the thermal efficiency depended on the bed temperature and the primary air factor being used.
Although the association between non-alcoholic fatty liver disease (NAFLD) and metabolic syndrome has been previously firmly established, the prevalence of NAFLD and its risk factors in rural communities remains incompletely defined. This study aimed to determine the prevalence and factors associated with ultrasound-diagnosed NAFLD amongst a rural community in Sarawak. An indigenous village was randomly selected where all adults aged 21 years and above underwent an abdominal ultrasound, biochemical tests and an anthropometric assessment. Respondents with a score > or =8 on an alcohol-use disorders-identification test (AUDIT) indicating harmful or hazardous drinking were excluded. Seventy-seven respondents (46.8% male, mean age 48.4 SD 16.64), met inclusion criteria. The prevalence of ultrasound diagnosed NAFLD was 44.2% (n=34), among them 52.9% had moderate NAFLD. There were no significant age or gender differences between respondents with and without NAFLD, although those with NAFLD were older. Respondents with NAFLD had a significantly higher BMI t,han those without NAFLD (p<0.001). Both male and female respondents with NAFLD had a significantly higher waist circumference than those without NAFLD (p<0.001). Prevalence of diabetes, hypertension, hyperglycemia and hypertriglyceridemia were significantly higher among those with NAFLD. However, there were no significant differences in terms of percentage of unhealthy body fat and muscle, and serum HDL levels. Risk factors independently associated with NAFLD included male gender (odd ratio 0.06; 95% CI 0.008-0.523) and waist circumference (odd ratio 1.2; 95% CI 1.036-1.421). There was a high prevalence of NAFLD and the presence of more severe stages of disease in this indigenous population. Life-style related diseases, such as fatty liver disease, can occur in rural as well as urban populations.
A twelve-week controlled intervention trial was carried out to evaluate the effects of combined physical activity and dietary intervention on obesity and metabolic risk factors among employees of Universiti Putra Malaysia. Participants consisted of adults aged 25-55 years with no reported chronic diseases but with abdominal obesity. They were assigned to either a combined physical activity and dietary intervention group or a control group. The final sample consisted of 56 participants, with an equal number of 28 for each study group. No significant group effect was observed for any variable except for hip circumference (HC) and fasting plasma glucose (FPG). There was a significant increase in HC (p=0.007) and reduction in FPG (p=0.02) in the intervention group compared to the control group. In the intervention group, HC (p=0.002), triglycerides (TG) (p=0.0001), total cholesterol (TC) (p=0.0001), LDL cholesterol (LDLC) (p=0.0001) and FPG (p=0.005) were significantly reduced, while waist circumference (WC) (p=0.025) and the waist-to-hip ratio (WHR) (p=0.027) were significantly reduced in the control group. No significant change in steps/day or calorie intake'was observed in either group. Taken together, these data indicate that the combined physical activity and dietary intervention was not effective at improving diet or physical activity level. However, the intervention was effective in improving FPG among participants with abdominal obesity. The significant increase in HC in the interventions group warrants further study. These findings will be useful to further improve group-based intervention for the prevention and management of obesity.
Composite archery bows have been well known and used by Asiatic societies for thousands of years. The Turkish composite bow, made of wood, horn, sinew and glue is one of the most famous and powerful bows in the world. Because of its high draw weight and mechanical efficiency, the Turkish composite bow became a powerful weapon in the Seljuk and the Ottoman empire. In addition to being a powerful weapon of war, at the same time the bow and arrow (archery) continued
to be a sport of Ottoman (sultans, state officials, janissaries) until the late Ottoman period. In this study of the Ottoman composite archery bows in the collections of Izmir Ethnography Museum, a small wood sample was investigated on the basis of its wood anatomy. The results showed that it was made of maple wood (Acer sp.) and some of its qualitative and quantitative anatomical properties are presented here. One of the key properties for the identification of maple wood is
the helical thickening throughout the body of the vessel element. Helical thickenings in vessel elements in cutting surfaces of maple-wooden core increase the bonding surface between the wood and sinew-horn. In most of the woods preferred traditionally for bow-making, helical thickenings in tracheids, vessel elements or ground tissue fibres should be taken into account at a hierarchy of cellular structures for elucidating the efficiency of Ottoman composite-wooden bow.
Research on joint torque reduction in robot manipulators has received considerable attention in recent years. Minimizing the computational complexity of torque optimization and the ability to calculate the magnitude of the joint torque accurately will result in a safe operation without overloading the joint actuators. This paper presents a mechanical design for a three dimensional planar redundant manipulator with the advantage of the reduction in the number of motors needed to control the joint angle, leading to a decrease in the weight of the manipulator. Many efforts have been focused on decreasing the weight of manipulators, such as using lightweight joints design or setting the actuators at the base of the manipulator and using tendons for the transmission of power to these joints. By using the design of this paper, only three motors are needed to control any n degrees of freedom in a three dimensional planar redundant manipulator instead of n motors. Therefore this design is very effective to decrease the weight of the manipulator as well as the number of motors needed to control the manipulator. In this paper, the torque of all the joints are calculated for the proposed manipulator (with three motors) and the conventional three dimensional planar manipulator (with one motor for each degree of freedom) to show the effectiveness of the proposed manipulator for decreasing the weight of the manipulator and minimizing driving joint torques.
This paper presents an anthropometric database of high school and university students from Kuala Lumpur, Malaysia. Forty-one high school participants (21 males and 20 females), 13-17 years old, and 143 university students (74 males and 69 females) took part in the study. Twenty-one static body dimensions were measured. The greatest mean differences in the anthropometric data between male and female high school students were found in the sitting elbow height. In addition, a comparison of anthropometric data of male and female university students showed that data for males and females were significantly different, except for buttock-popliteal length, sitting elbow height and thigh clearance. The primary aim of this study was to develop an anthropometric database that could be used as a primary reference in designing products, devices and equipment for ergonomic learning environments.
Logistic regression was applied to develop a morphometric sexing method of two closely related stork species that were previously sexed through amplification of the CHD gene. Tarsus length (TL) and bill length (BL) measurements were recorded from captive populations of adult Milky Stork (Mycteria cinerea) (n = 60) and Painted Stork (Mycteria leucocephala) (n = 58) at Zoo Negara Malaysia. Despite having monomorphic plumages, both stork species exhibited normal sexual size dimorphism in which males were significantly larger than females in the tested variables. Based on logistic regression analysis, BL correctly classified the sex of sampled individuals from Painted and Milky stork with an overall predicted accuracy of 94.8 and 90.0%, respectively. However, TL measurements generated a lower predicted accuracy level of 86.2% and a same accuracy level of 90% on the sex classification of individuals from Painted and Milky stork, respectively. By comparing the measurements of both species, only the average BL measurements of the Milky storks were significantly lower than that of Painted storks (t-test, P80.001). The logistic regression equation in this study may serve as a simple and more practical option for sexing Milky and Painted storks for their breeding and conservation programmes.
Protein-rich by-products from the canning industry, especially dark flesh of skipjack, have limited uses due to several factors such as darken color, susceptibility to oxidation and off flavour. Protein hydrolysates from skipjack dark flesh was produced with different type of industrial proteases (Alcalase®2.4L FG, Protamex®, Neutrase®1.5MG and Flavourzyme®500MG) for 60, 120, 180 and 240 min with level of proteases used of 0.5, 1, 1.5 and 2% per weight of raw material. The degree of hydrolysis and free tryptophan content of hydrolysate were investigated. The results shows longer time with higher concentration of enzyme has increased the degree of hydrolysis. Alcalase®2.4L FG had the highest degree of hydrolysis among all proteases followed by Protamex®, Flavourzyme®500MG and Neutrase® 1.5MG. All enzymes increase free tryptophan content linearly with the increament of protease enzyme level. The longer the hydrolysis time, the higher the content of free tryptophan produced.