MyMedR

Displaying publications 61 - 80 of 258 in total

Abstract:

Sort:

Understanding the performance and mechanism of Mg-containing oxides as support catalysts in the thermal dry reforming of methane

Khairudin NF, Sukri MFF, Khavarian M, Mohamed AR

Beilstein J Nanotechnol, 2018;9:1162-1183.
PMID: 29719767 DOI: 10.3762/bjnano.9.108

Dry reforming of methane (DRM) is one of the more promising methods for syngas (synthetic gas) production and co-utilization of methane and carbon dioxide, which are the main greenhouse gases. Magnesium is commonly applied in a Ni-based catalyst in DRM to improve catalyst performance and inhibit carbon deposition. The aim of this review is to gain better insight into recent developments on the use of Mg as a support or promoter for DRM catalysts. Its high basicity and high thermal stability make Mg suitable for introduction into the highly endothermic reaction of DRM. The introduction of Mg as a support or promoter for Ni-based catalysts allows for good metal dispersion on the catalyst surface, which consequently facilitates high catalytic activity and low catalyst deactivation. The mechanism of DRM and carbon formation and reduction are reviewed. This work further explores how different constraints, such as the synthesis method, metal loading, pretreatment, and operating conditions, influence the dry reforming reactions and product yields. In this review, different strategies for enhancing catalytic activity and the effect of metal dispersion on Mg-containing oxide catalysts are highlighted.
Characterisation of β-carotene partitioning in protein emulsions: Effects of pre-treatments, solid fat content and emulsifier type

Wan Mohamad WAF, McNaughton D, Augustin MA, Buckow R

Food Chem, 2018 Aug 15;257:361-367.
PMID: 29622223 DOI: 10.1016/j.foodchem.2018.03.027

Understanding the bioactive partitioning between the phases of an emulsion system underpins strategies for improving the efficiency of bioactive protection against degradation. We analysed partitioning of β-carotene in emulsions with various formulations in-situ using confocal Raman microscopy (CRM). The partitioning of β-carotene into the aqueous phase of emulsions increased when whey protein isolate (WPI) was heat or high pressure-treated prior to emulsion formation. However, increasing the concentration of high pressure-treated WPI reduced the β-carotene partitioning into the aqueous phase. Increasing the solid fat content in the carrier oil favoured the migration of β-carotene into the aqueous phase. The use of WPI as the emulsifier resulted in a greater partitioning of β-carotene into the aqueous phase compared to when Tween 40 was the emulsifier. This study demonstrates that partitioning of β-carotene between the aqueous and oil phase is dependent on the characteristics of the oil phase, emulsifier type and processing.
In situ quantification of β-carotene partitioning in oil-in-water emulsions by confocal Raman microscopy

Wan Mohamad WAF, Buckow R, Augustin M, McNaughton D

Food Chem, 2017 Oct 15;233:197-203.
PMID: 28530566 DOI: 10.1016/j.foodchem.2017.04.086

Confocal Raman microscopy (CRM) was able to quantify the β-carotene concentration in oil droplets and determine the partitioning characteristics of β-carotene within the emulsion system in situ. The results were validated by a conventional method involving solvent extraction of β-carotene separately from the total emulsion as well as the aqueous phase separated by centrifugation, and quantification by absorption spectrophotometry. CRM also enabled the localization of β-carotene in an emulsion. From the Raman image, the β-carotene partitioning between the aqueous and oil phases of palm olein-in-water emulsions stabilized by whey protein isolate (WPI) was observed. Increasing the concentration of β-carotene in an emulsion (from 0.1 to 0.3g/kg emulsion) with a fixed gross composition (10% palm olein:2% WPI) decreased the concentration of β-carotene in the oil droplet. CRM is a powerful tool for in situ analyses of components in heterogeneous systems such as emulsions.
Prevention of oral carcinogenesis in rats by Dracaena cinnabari resin extracts

Al-Afifi N, Alabsi A, Kaid F, Bakri M, Ramanathan A

Clin Oral Investig, 2019 May;23(5):2287-2301.
PMID: 30291495 DOI: 10.1007/s00784-018-2685-6

OBJECTIVES: In vivo study was performed to determine the chemopreventive efficacy of the DC resin methanol extract on a 4-nitroquinoline-1-oxide (4NQO) oral cancer animal model.
MATERIALS AND METHODS: This study involves administration of 4NQO solution for 8 weeks alone (cancer induction) or with Dracaena cinnabari (DC) extract at 100, 500, and 1000 mg/kg. DC extract administration started 1 week before exposure until 1 week after the carcinogen exposure was stopped. All rats were sacrificed after 22 weeks, and histological analysis was performed to assess any incidence of pathological changes. Immunohistochemical expressions of selected tumor marker antibodies were analyzed using an image analyzer computer system, and the expression of selected genes involved in apoptosis and proliferative mechanism related to oral cancer were evaluated using RT2-PCR.
RESULTS: The incidence of OSCC decreased with the administration of DC extract at 100, 500, and 1000 mg/kg compared to the induced cancer group. The developed tumor was also observed to be smaller when compared to the induced cancer group. The DC 1000 mg/kg group inhibits the expression of Cyclin D1, Ki-67, Bcl-2, and p53 proteins. It was observed that DC 1000 mg/kg induced apoptosis by upregulation of Bax and Casp3 genes and downregulation of Tp53, Bcl-2, Cox-2, Cyclin D1, and EGFR genes when compared to the induced cancer group.
CONCLUSIONS: The data indicated that systemic administration of the DC resin methanol extract has anticarcinogenic potency on oral carcinogenesis.
CLINICAL RELEVANCE: Chemoprevention with DC resin methanol extract may significantly reduce morbidity and possibly mortality from OSCC.
Fulltext Association between Breastfeeding Attitudes and Postpartum Depression among Mothers with Premature Infants during COVID-19 Pandemic

Yahya NFS, Teng NIMF, Shafiee N, Juliana N

Int J Environ Res Public Health, 2021 10 17;18(20).
PMID: 34682652 DOI: 10.3390/ijerph182010915

Breastfeeding is the best form of feeding for premature infants. However, mothers with premature delivery are frequently reported to be depressed, and this has been especially the case during the Coronavirus Disease-2019 (COVID-19) pandemic. We aimed to measure the level of breastfeeding attitude and its association with postpartum depression among mothers with premature infants in the Neonatal Intensive Care Unit (NICU) during the COVID-19 pandemic. A total of 248 mothers with a premature infant were observed in this cross-sectional study from the chosen NICUs of government hospitals in Selangor, Malaysia. The Iowa Infant Feeding Attitude Score (IIFAS) and the Edinburgh Postnatal Depression Scale, along with sociodemographic questionnaires, were used to obtain information on the mothers' attitudes towards breastfeeding and the risk of postpartum depression. A higher percentage of mothers had a positive attitude towards breastfeeding (64.9%), with a mean IIFAS score of 66.30 ± 6.92. Meanwhile, about 27% of mothers with premature infants were reported to have high risk of depressive symptoms. Mothers with a high risk of depression were less likely to have a positive attitude towards breastfeeding (OR 0.37, 95% CI 0.199, 0.675) as compared to mothers with a low risk of depression (p < 0.01). We found that there is an association between the risk of depression and the attitude towards breastfeeding. Early identification of maternal mental health problems should be addressed to ensure the willingness of mothers to continue breastfeeding.
Quality of Life Among Malaysian Parents with Autism Spectrum Disorder Child: The Double ABCX Model Approach

Ismail MF, Safii R, Saimon R, Rahman MM

J Autism Dev Disord, 2022 Jan;52(1):113-123.
PMID: 33635421 DOI: 10.1007/s10803-021-04929-6

This paper reported the quality of life (QoL) of 260 Malaysian parents with autism spectrum disorder (ASD) and factors which influencing it. About half of these parents reported to having good QoL. The factors identified in the double ABCX model showed that perceived social support and sense of coherence (SOC) were mediated by coping strategies and had a positive direct and indirect effect on parents' QoL. These finding reiterate the importance of social support, coping skills, and strong SOC reflection skills in influencing the QoL of parents with ASD child. We therefore suggest parents to utilize the widely available social and organization supports to gain good QoL, which is also important for the wellbeing of their child.
A Study On the Optoelectronic Parameters of Natural Dyes Extracted from Beetroot, Cabbage, Walnut, and Henna for Potential Applications in Organic Electronics

Amin PO, Muhammadsharif FF, Saeed SR, Sulaiman K

J Fluoresc, 2022 Jan;32(1):203-213.
PMID: 34694548 DOI: 10.1007/s10895-021-02837-7

In this work, the optoelectronic parameters of natural dyes extracted from beetroot, red cabbage, walnut leaves, and henna were comprehensively investigated, namely the optical energy gap (Eg), extinction coefficient (k), refractive index (n), dielectric constant ([Formula: see text], and optical conductivity ([Formula: see text]. Results showed a high refractive index, dielectric constant and optical conductivity ([Formula: see text] and [Formula: see text]) for the dye extracted from red cabbage, while minimum values of [Formula: see text] and [Formula: see text] were obtained for the henna dye. The transition type of the optical absorption of the dyes was found to be a direct allowed transition, which is taken place between the bonding and antibonding molecular energy levels. The reported results herein are essential in revealing the viability of these natural dyes for potential applications in organic electronics, including organic photovoltaics, photodiodes, and sensors.
A robust background correction algorithm for forensic bloodstain imaging using mean-based contrast adjustment

Lee WC, Khoo BE, Abdullah AFL

Sci Justice, 2016 May;56(3):201-209.
PMID: 27162018 DOI: 10.1016/j.scijus.2016.01.001

Background correction algorithm (BCA) is useful in enhancing the visibility of images captured in crime scenes especially those of untreated bloodstains. Successful implementation of BCA requires all the images to have similar brightness which often proves a problem when using automatic exposure setting in a camera. This paper presents an improved background correction algorithm (BCA) that applies mean-based contrast adjustment as a pre-correction step to adjust the mean brightness of images to be similar before implementing BCA. The proposed modification, namely mean-based adaptive BCA (mABCA) was tested on various image samples captured under different illuminations such as 385 nm, 415 nm and 458 nm. We also evaluated mABCA of two wavelengths (415 nm and 458 nm) and three wavelengths (415 nm, 380 nm and 458 nm) in enhancing untreated bloodstains on different surfaces. The proposed mABCA is found to be more robust in processing images captured in different brightness and thus overcomes the main issue faced in the original BCA.
Contactless Visualization of Latent Fingerprints on Nonporous Curved Surfaces of Circular Cross Section-A Statistical Evaluation on the Materials as Plane Mirror

Low WZ, Khoo BE, Abdullah AFLB

J Forensic Sci, 2018 Jul;63(4):1092-1098.
PMID: 29178492 DOI: 10.1111/1556-4029.13702

A new contactless technique for latent fingerprint visualization on nonporous curved surfaces of circular cross section was introduced by Low et al. (1). The technique utilizes a plane mirror to convey the light rays toward the inspected surfaces for latent fingerprint visualization. This research activity came up as an extension of the previous study which utilized an aluminum plate as the plane mirror to illuminate the inspected surfaces. Dulling spray was used to increase the diffuse component of the reflective aluminum plate. However, the amount of dulling spray will affect the uniformity of the illumination on the inspected curved surfaces. In this study, a study on the new materials for the plane mirror was carried out. Coated aluminum, opal, and ground glass diffusers were selected as the new materials. The performance of the new materials was compared to the aluminum based on the quality of the captured images on various nonporous cylindrical surfaces. A statistical approach known as randomized complete block design was used to design the experiment. The quality of the captured images was obtained using Spectral Image Validation and Verification. Two-way analysis of variance and Fisher's least significant difference test were used to analyze the quality of the images. From the results of the statistical analysis, coated aluminum has the best performance compared to aluminum, opal, and ground glass diffusers.
Fulltext The intervention strategies and service model for pharmacist-led diabetes management: a scoping review

Hassan F, Hatah E, Ali AM, Wen CW

BMC Health Serv Res, 2023 Jan 18;23(1):46.
PMID: 36653832 DOI: 10.1186/s12913-022-08977-1

BACKGROUND: There is increasing intervention activities provided during pharmacist-led diabetes management. Nevertheless, there is an unclear definition of the activities involved during the intervention. Thus, this study aimed to describe the type of intervention strategies and service model provided during pharmacist-led type 2 diabetes management and service outcomes.
METHODS: This study utilized the scoping review methodology of the Joanna Briggs Institute Reviewers' Manual 2015. Articles on pharmacist-led diabetes management focusing on the service content, delivery methods, settings, frequency of appointments, collaborative work with other healthcare providers, and reported outcomes were searched and identified from four electronic databases: Ovid Medline, PubMed, Scopus, and Web of Science from 1990 to October 2020. Relevant medical subject headings and keywords, such as "diabetes," "medication adherence," "blood glucose," "HbA1c," and "pharmacist," were used to identify published articles.
RESULTS: The systematic search retrieved 4,370 articles, of which 61 articles met the inclusion criteria. The types of intervention strategies and delivery methods were identified from the studies based on the description of activities reported in the articles and were tabulated in a summary table.
CONCLUSION: There were variations in the descriptions of intervention strategies, which could be classified into diabetes education, medication review, drug consultation/counseling, clinical intervention, lifestyle adjustment, self-care, peer support, and behavioral intervention. In addition, most studies used a combination of two or more intervention strategy categories when providing services, with no specific pattern between the service model and patient outcomes.
Technical feasibility study of a low-cost hybrid PAC-UF system for wastewater reclamation and reuse: a focus on feedwater production for low-pressure boilers

Amosa MK, Jami MS, Alkhatib MF, Majozi T

Environ Sci Pollut Res Int, 2016 Nov;23(22):22554-22567.
PMID: 27557958

This study has applied the concept of the hybrid PAC-UF process in the treatment of the final effluent of the palm oil industry for reuse as feedwater for low-pressure boilers. In a bench-scale set-up, a low-cost empty fruit bunch-based powdered activated carbon (PAC) was employed for upstream adsorption of biotreated palm oil mill effluent (BPOME) with the process conditions: 60 g/L dose of PAC, 68 min of mixing time and 200 rpm of mixing speed, to reduce the feedwater strength, alleviate probable fouling of the membranes and thus improve the process flux (productivity). Three polyethersulfone ultrafiltration membranes of molecular weight cut-off (MWCO) of 1, 5 and 10 kDa were investigated in a cross-flow filtration mode, and under constant transmembrane pressures of 40, 80, and 120 kPa. The permeate qualities of the hybrid processes were evaluated, and it was found that the integrated process with the 1 kDa MWCO UF membrane yielded the best water quality that falls within the US EPA reuse standard for boiler-feed and cooling water. It was also observed that the permeate quality is fit for extended reuse as process water in the cement, petroleum and coal industries. In addition, the hybrid system's operation consumed 37.13 Wh m(-3) of energy at the highest applied pressure of 120 kPa, which is far lesser than the typical energy requirement range (0.8-1.0 kWh m(-3)) for such wastewater reclamation.
Air pollution effects on adult mortality rate in developing countries

Ahmad NA, Ismail NW, Ahmad Sidique SF, Mazlan NS

Environ Sci Pollut Res Int, 2021 Feb;28(7):8709-8721.
PMID: 33068244 DOI: 10.1007/s11356-020-11191-3

Although industrialisation is a crucial aspect of economic growth across developing nations, through the release of air contaminants, industrial activities may also create adverse environmental health consequences. Noting that continuous production and other economic activities are crucial for continued survival, this study explores this issue by including the role of governance that is deemed essential but the literature is relatively sparse particularly in the context of developing countries. This research empirically analyses the relationship between air pollution and adult mortality rates from 72 developing countries from the period of 2010 until 2017. Particulate matter (PM2.5) and carbon dioxide (CO2) are used as indicators of air pollution. From the generalized method of moments (GMM) estimations, the results reveal that air pollution negatively affects adult mortality rate. The result reveals that a 10% increase in the PM2.5 level induces the adult mortality rates to increase between 0.04% and 0.06%. In addition, the government significantly moderates the negative effect of air pollution on adult mortality, whereby a one-unit enhancement in governance quality index reduces mortality among the adults in the developing countries by 0.01%. On the other hand, CO2 emission also appears to be positive, but not statistically significant. The results suggest that governance and public health interplay in the sense of a transition towards economic development for improved living and health states can be achievable with improved governance quality.
Air pollution, governance quality, and health outcomes: evidence from developing countries

Ahmad NA, Ismail NW, Sidique SFA, Mazlan NS

Environ Sci Pollut Res Int, 2023 Mar;30(14):41060-41072.
PMID: 36630041 DOI: 10.1007/s11356-023-25183-6

While studies have demonstrated that air pollution can be catastrophic to the population's health, few empirical studies are found in the economic literature because a considerable proportion of the evidence comes from epidemiological studies. Because of the crucial role of governance in the health community, good governance has been a contentious issue in public sector management in recent years. Therefore, the aim of this study is to examine the effects of air pollution and the role of governance on health outcomes. This study employed the generalized method of moment (GMM) estimation techniques to analyse panel data for 72 developing countries from 2010 to 2017. The empirical results confirm that higher PM2.5 and CO2 levels have a detrimental influence on life expectancy and healthy life expectancy, whereas the role of governance has a positive impact on life expectancy and healthy life expectancy. Furthermore, the findings show governance quality plays a role in moderating the negative effect of PM2.5 on health outcomes. The ongoing rise in air pollution has had a significant impact on the health of developing countries. It appears that governance quality has improved health outcomes. The findings have important policy implications, such that strengthening governance can reduce air pollution emissions in developing countries. However, to reduce the health effects of air pollution, developing countries must implement effective environmental development policies and track the implementation and enforcement of such policies.
Fulltext Microheater: material, design, fabrication, temperature control, and applications-a role in COVID-19

Jeroish ZE, Bhuvaneshwari KS, Samsuri F, Narayanamurthy V

Biomed Microdevices, 2021 Dec 03;24(1):3.
PMID: 34860299 DOI: 10.1007/s10544-021-00595-8

Heating plays a vital role in science, engineering, mining, and space, where heating can be achieved via electrical, induction, infrared, or microwave radiation. For fast switching and continuous applications, hotplate or Peltier elements can be employed. However, due to bulkiness, they are ineffective for portable applications or operation at remote locations. Miniaturization of heaters reduces power consumption and bulkiness, enhances the thermal response, and integrates with several sensors or microfluidic chips. The microheater has a thickness of ~ 100 nm to ~ 100 μm and offers a temperature range up to 1900℃ with precise control. In recent years, due to the escalating demand for flexible electronics, thin-film microheaters have emerged as an imperative research area. This review provides an overview of recent advancements in microheater as well as analyses different microheater designs, materials, fabrication, and temperature control. In addition, the applications of microheaters in gas sensing, biological, and electrical and mechanical sectors are emphasized. Moreover, the maximum temperature, voltage, power consumption, response time, and heating rate of each microheater are tabulated. Finally, we addressed the specific key considerations for designing and fabricating a microheater as well as the importance of microheater integration in COVID-19 diagnostic kits. This review thereby provides general guidelines to researchers to integrate microheater in micro-electromechanical systems (MEMS), which may pave the way for developing rapid and large-scale SARS-CoV-2 diagnostic kits in resource-constrained clinical or home-based environments.
Fulltext Bridging the gap between bariatric surgery and continuous multidisciplinary care

Ahmad Zawawi M'F, Jahit MS, Mohd Yusof BN

Malays Fam Physician, 2024;19:8.
PMID: 38496771 DOI: 10.51866/lte.514
Sublingual Ectopic Thyroid Presenting with Congenital Hypothyroidism

Kashaf N'AFA, Lim CC, Kulasegarah J

Indian J Otolaryngol Head Neck Surg, 2024 Dec;76(6):6106-6110.
PMID: 39558985 DOI: 10.1007/s12070-024-04915-1
Fulltext Impact of Attendance to a Pharmacist-Managed Medication Adherence Clinic on Glycemic Control and Risk Factors for Non-Completion Among Persons with Type 2 Diabetes Mellitus in Selangor, Malaysia

Hassan F, Hatah E, Chong WW, Ali AM

Ther Clin Risk Manag, 2024;20:495-503.
PMID: 39156759 DOI: 10.2147/TCRM.S442026

BACKGROUND: Diabetes mellitus (DM) is a chronic metabolic disorder affecting millions globally. Adherence to treatment is crucial for effective management.
OBJECTIVE: To compare clinical outcomes, specifically changes in haemoglobin A1c (HbA1c) and fasting blood sugar (FBS) levels, between DM patients who completed the pharmacist-managed Diabetes Medication Therapy Adherence Clinic (DMTAC) sessions and those who did not, and to identify risk factors associated with non-completion of DMTAC.
METHODS: This multicenter, retrospective study included patients with DM attending DMTAC at five Ministry of Health centers from January 2018 to December 2020. Patients were categorized based on their completion of DMTAC sessions: those who completed at least four sessions and those who did not as per DMTAC protocol. The changes in HbA1c and FBS levels between the groups were analyzed. Logistic regression was employed to identify risk factors for non-completion of DMTAC.
RESULTS: A total of 198 patients were included, comprising 49% male with a mean age of 56.52, ±12.91 years. The complete group consisted of 49% (n=99) of the patients, while the did not complete group included 50.5% (n=100). A statistically significant reduction in FBS levels from initial to final measurements was observed in the complete group compared to the did not complete group (P=0.024). Female gender, higher education levels, and a longer duration since DM diagnosis were significantly associated with non-completion of DMTAC.
CONCLUSION: Diabetic patients attending at least four DMTAC sessions showed potential improvements in FBS levels. To enhance attendance at DMTAC sessions, healthcare professionals should focus on patients identified with risk factors for non-completion of DMTAC.
Fulltext Nutrition and physical activity interventions to ameliorate postpartum depression: A scoping review

Yahya NFS, Teng NIMF, Das S, Juliana N

Asia Pac J Clin Nutr, 2021 Dec;30(4):662-674.
PMID: 34967195 DOI: 10.6133/apjcn.202112_30(4).0013

BACKGROUND AND OBJECTIVES: Globally, there is a high prevalence of postpartum depression (17.7%) reported in a recent study among mothers during the postpartum period. It contributes to poor health and well-being among newly delivered women. We reviewed the published effect of nutrition and physical activity interventions on improving and treating postpartum depression.
METHODS AND STUDY DESIGN: The scoping review was performed using Arksey and O'Malley's methodological framework. The systematic search was conducted using Scopus, Pubmed, EBSCOHost and Google Scholar in April 2020, updated in March 2021. Only literature published between January 2010 until February 2021 was searched.
RESULTS: A total of 25 articles were included, of which 23 were randomised controlled trials , and 2 were quasi-experimental studies. Some of studies found improvements in depression (76% out of all studies). On this basis, nutrition or physical activity intervention probably improves postpartum depression. Moreover, the integration of nutrition and physical activity appears to improve depression in the more thorough follow-up of participants . Active involvement of the participant in the interventions was contributory to effectiveness.
CONCLUSIONS: Nutrition and physical activity interventions with appropriate strategy and delivery are promising options for the management of postpartum maternal mental health. More definitive investigation of non-pharmacological interventions to ameliorate depression among postpartum women is warranted.
Fulltext Effect of uv-ozone treatment on physicochemical properties of mesoporous hollow carbon nanoparticles

Muhammad Nur Amir Azman, Yusilawati Ahmad Nor, Nur Husna Samsudin, Ma’an Fahmi Rashid Alkhatib, Yeow, Tshai Kim

Biological and Natural Resources Engineering Journal, 2020;3(2):35-45.
MyJurnal

Carbon nanoparticles have been widely used in various applications. However, they are commonly known to have low dispersibility and chemical inertness which limit their practical ability in medical or biological area. Some studies have been performed to modify carbon nanoparticles such as carbon nanotubes using ultraviolet (UV)-Ozone system. However, little is known on the effects of such system towards other types of carbon nanoparticles such as mesoporous hollow carbon nanoparticles (MHCNs). Thus, in this study, improvement of MHCNs physiochemical properties have been studied using UV-Ozone treatment for the first time. The treatment was conducted in water as dispersant agent at ozone flowrate of 1.0 L/min and exposure time of 45 min. SEM images observed that MHCNs morphology and surface structure remain intact after the treatment. Observations on the dispersibility of MHCNs in phosphate buffered saline (PBS) solution shows that the dispersibility was improved compared to the untreated ones. This was supported by the low Z-average and PDI values of treated MHCNs obtained at ~400 nm and 0.2, respectively when compared to the untreated MHCNs which was obtained at 970 nm and 0.417, respectively. Thermogravimetric analysis (TGA) showed an increased in weight loss of treated MHCNs at the lower temperature compared to untreated MHCNs. Results from Fourier Transform Infrared (FTIR) showed an increase number of new functional groups that includes carboxylic acid group presence at the surface of treated MHCNs which contributes to the improvement of their dispersibility, thermal properties and chemical functionality. These findings opened a new possibility of using UV-Ozone treatment to improve physicochemical properties of MHCNs for medical area such as in drug delivery application in addition to their excellent storage and carrier system.
Fulltext Cube polygon: a new modified Euler method to improve electric circuit efficiency

Nurhafizah Moziyana Mohd Yusop, Nooraida Samsudin, Nooraida Samsudin, Anis Shahida Mokhta, Siti Rohaidah Ahmad, Mohd Fahmi Mohammad Amran, et al.

ZULFAQAR International Journal of Defence Science, Engineering & Technology, 2020;3(1):8-14.
MyJurnal

Euler method is a numerical order process for solving problems with the Ordinary Differential Equation (ODE). It is a fast and easy way. While Euler offers a simple procedure for solving ODEs, problems such as complexity, processing time and accuracy have driven others to use more sophisticated methods. Improvements to the Euler method have attracted much attention resulting in numerous modified Euler methods. This paper proposes Cube Polygon, a modified Euler method with improved accuracy and complexity. In order to demonstrate the accuracy and easy implementation of the proposed method, several examples are presented. Cube Polygon’s performance was compared to Polygon’s scheme and evaluated against exact solutions using SCILAB. Results indicate that not only Cube Polygon has produced solutions that are close to identical solutions for small step sizes, but also for higher step sizes, thus generating more accurate results and decrease complexity. Also known in this paper is the general of the RL circuit due to the ODE problem.

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links