MyMedR

Displaying publications 61 - 80 of 106 in total

Abstract:

Sort:

Fulltext Conventional rapid latex agglutination in estimation of von Willebrand factor: method revisited and potential clinical applications

Mahat M, Abdullah WZ, Hussin CM

J Immunol Res, 2014;2014:850810.
PMID: 25759835 DOI: 10.1155/2014/850810

Measurement of von Willebrand factor antigen (VWF : Ag) levels is usually performed in a specialised laboratory which limits its application in routine clinical practice. So far, no commercial rapid test kit is available for VWF : Ag estimation. This paper discusses the technical aspect of latex agglutination method which was established to suit the purpose of estimating von Willebrand factor (VWF) levels in the plasma sample. The latex agglutination test can be performed qualitatively and semiquantitatively. Reproducibility, stability, linearity, limit of detection, interference, and method comparison studies were conducted to evaluate the performance of this test. Semiquantitative latex agglutination test was strongly correlated with the reference immunoturbidimetric assay (Spearman's rho = 0.946, P < 0.001, n = 132). A substantial agreement (κ = 0.77) was found between qualitative latex agglutination test and the reference assay. Using the scoring system for the rapid latex test, no agglutination is with 0% VWF : Ag (control negative), 1+ reaction is equivalent to <20% VWF : Ag, and 4+ reaction indicates >150% VWF : Ag (when comparing with immunoturbidimetric assay). The findings from evaluation studies suggest that latex agglutination method is suitable to be used as a rapid test kit for the estimation of VWF : Ag levels in various clinical conditions associated with high levels and low levels of VWF : Ag.

Matched MeSH terms: Latex Fixation Tests/methods*
Fulltext Variation in wood density and shrinkage in two latex timber clones of rubber trees in different planting densities

Naji, H.R., Sahri, M.H., Bakar, E.S., Soltani, M., Hamid, H.A.

ASM Science Journal, 2014;8(1):36-43.
MyJurnal

Wood density and types of shrinkage were examined in two rubberwood latex timber clones of rubber (Hevea brasiliensis) namely RRIM 2020 and RRIM 2025, planted at densities of 500, 1000, 1500, and 2000 trees/ha, within a trial plot. The mean wood density showed a low descending trend towards high planting densities in both clones. Wood density was significantly and negatively correlated with planting density. The strength of correlation was moderate. The mean longitudinal shrinkage in both clones and tangential shrinkages in clone RRIM 2020 showed no significant difference among planting densities. The tangential (in RRIM 2025), radial and volumetric shrinkages in both clones decreased from low to high planting densities and the differences were more pronounced between densities of 500 trees/ha and 2000 trees/ha. The magnitudes of correlation between these shrinkages and planting density were low. The regression models indicated that wood density could be more ascribed by planting density followed by volumetric shrinkage. This study exhibited low variations in wood density and shrinkages among clones and the respective planting densities; however, RRIM 2025 was more stable than RRIM 2020.

Matched MeSH terms: Latex
Dynamic mechanical and dielectric properties of modified surface chitosan/natural rubber latex

Taweepreda W

Sains Malaysiana, 2014;43:241-245.

Biodegradable polymeric films, obtained from chitosan/natural rubber latex (CS/NRL) blends with different compositions, have been prepared by wetting process. The blends were characterized by dynamic mechanical thermal analysis (DMTA) and found that the CS/NRL blends are thermodynamically incompatible. This is evident from the presence of two glass transitions, corresponding to CS and NRL phases in the blend. The mechanical properties of the CS/NRL blends were improved with increasing the amount of chitosan and after surface treatment with sulphuric acid due to the sulfonate ionic interaction. The dielectric properties was determined using Precision LCR meter in the frequency range 75 kHz up to 30 MHz. After CS/NRL surface treatment with sulphuric acid at high content of chitosan showed the highest dielectric constant. The surface properties of the CS/NRL blend films before and after surface treatment were confirmed by atomic force microscopy (AFM), respectively.

Matched MeSH terms: Latex
Electrochemical genosensor assay using lyophilized gold nanoparticles/latex microsphere label for detection of Vibrio cholerae

Liew PS, Lertanantawong B, Lee SY, Manickam R, Lee YH, Surareungchai W

Talanta, 2015 Jul 1;139:167-73.
PMID: 25882423 DOI: 10.1016/j.talanta.2015.02.054

Vibrio cholerae is a Gram-negative bacterium that causes cholera, a diarrheal disease. Cholera is widespread in poor, under-developed or disaster-hit countries that have poor water sanitation. Hence, a rapid detection method for V. cholerae in the field under these resource-limited settings is required. In this paper, we describe the development of an electrochemical genosensor assay using lyophilized gold nanoparticles/latex microsphere (AuNPs-PSA) reporter label. The reporter label mixture was prepared by lyophilization of AuNPs-PSA-avidin conjugate with different types of stabilizers. The best stabilizer was 5% sorbitol, which was able to preserve the dried conjugate for up to 30 days. Three methods of DNA hybridization were compared and the one-step sandwich hybridization method was chosen as it was fastest and highly specific. The performance of the assay using the lyophilized reagents was comparable to the wet form for detection of 1aM to 1fM of linear target DNA. The assay was highly specific for V. cholerae, with a detection limit of 1fM of PCR products. The ability of the sensor is to detect LAMP products as low as 50ngµl(-1). The novel lyophilized AuNPs-PSA-avidin reporter label with electrochemical genosensor detection could facilitate the rapid on-site detection of V. cholerae.

Matched MeSH terms: Latex
Enhanced dispersion of multiwall carbon nanotubes in natural rubber latex nanocomposites by surfactants bearing phenyl groups

Mohamed A, Anas AK, Bakar SA, Ardyani T, Zin WM, Ibrahim S, et al.

J Colloid Interface Sci, 2015 Oct 1;455:179-87.
PMID: 26070188 DOI: 10.1016/j.jcis.2015.05.054

Here is presented a systematic study of the dispersibility of multiwall carbon nanotubes (MWCNTs) in natural rubber latex (NR-latex) assisted by a series of single-, double-, and triple-sulfosuccinate anionic surfactants containing phenyl ring moieties. Optical polarising microscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and Raman spectroscopy have been performed to obtain the dispersion-level profiles of the MWCNTs in the nanocomposites. Interestingly, a triple-chain, phenyl-containing surfactant, namely sodium 1,5-dioxo-1,5-bis(3-phenylpropoxy)-3-((3-phenylpropoxy)carbonyl) pentane-2-sulfonate (TCPh), has a greater capacity the stabilisation of MWCNTs than a commercially available single-chain sodium dodecylbenzenesulfonate (SDBS) surfactant. TCPh provides significant enhancements in the electrical conductivity of nanocomposites, up to ∼10(-2) S cm(-1), as measured by a four-point probe instrument. These results have allowed compilation of a road map for the design of surfactant architectures capable of providing the homogeneous dispersion of MWCNTs required for the next generation of polymer-carbon-nanotube materials, specifically those used in aerospace technology.

Matched MeSH terms: Latex/chemistry*
Complete genome sequence of Streptomyces sp. strain CFMR 7, a natural rubber degrading actinomycete isolated from Penang, Malaysia

Nanthini J, Chia KH, Thottathil GP, Taylor TD, Kondo S, Najimudin N, et al.

J Biotechnol, 2015 Nov 20;214:47-8.
PMID: 26376470 DOI: 10.1016/j.jbiotec.2015.09.007

Streptomyces sp. strain CFMR 7, which naturally degrades rubber, was isolated from a rubber plantation. Whole genome sequencing and assembly resulted in 2 contigs with total genome size of 8.248 Mb. Two latex clearing protein (lcp) genes which are responsible for rubber degrading activities were identified.

Matched MeSH terms: Latex
Fulltext Feasibility of using latex examination gloves as dental dam: a tensile strength study

Budi Aslinie Md Sabri, Nur Hidayah Mohd Radzi, Fatimatuz Zahira Abdul Hadi, Ikmal HishamIsmai

Compendium of Oral Science, 2015;2(1):6-13.
MyJurnal

Objective: To evaluate feasibility of hand gloves as a rubber dam isolation alternative, in respect of physical properties. Materials and Methods: A randomized controlled trial study design was used. Three types of gloves were tested with two types of a rubber dam used as the control group. Cut-out pattern of dumb-bell shapes were made from 35 samples for each type of groups and tensile strength were tested using Universal Testing Machine and the Trapezium X software. All tests for physical requirements were performed in accord-ance with American Society for Testing and Materials D412, Standard Test Methods for Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic Elastomers-Tension. Findings were analyzed by analysis of vari-ance (ANOVA) and differences were compared using a Tukey-Kramer interval calculated at the 0.05 signifi-cance level. Results: Heavy gauge rubber dam has the highest Mean (calculated at the 0.05 significance level) except for maximum stress calculated at entire area. Medium-gauge rubber dam has significantly higher tensile strength (44.5075 N/mm2) when compared to heavy-gauge rubber dam (35.7787 N/mm2) although it was 0.09mm thinner. Discovery 2020 Powder Free Latex Examination Gloves with tensile strength value of 28.5922 N/mm2 (±3.27366) is more than the minimum requirement specified by American Federal Specification ZZ-R90B Rubber Dam (Dental, 1985) (4000 pounds per square inch or 27.6 N/mm2). For all variable tested, all groups are significantly different from each other. The mean square between the groups was quite large. Conclusion: This study shows that there are significant differences between the physical strength of latex gloves when com-pared to rubber dam. However, the comparison between thickness and tensile strength among various rubber dam, did not correspond proportionately. Only one type of rubber gloves met the minimum requirement but that is just one aspect. In view of these mixed results, more research is needed before we can conclude that it is feasable that we use hand gloves to replace rubber dam.

Matched MeSH terms: Latex
Fulltext A diagnostic workup of perioperative anaphylaxis reveals a selective type 1 hypersensitivity to cefazolin

Meera Thalayasingam, Shek, Lynette Pei-Chi

International e-Journal of Science, Medicine & Education, 2015;9(2):37-39.
MyJurnal

Anaphylaxis in the operating room although infrequent can be potentially fatal. The diagnosis of perioperative anaphylaxis is complex due to a multitude of factors. Firstly, patients under anesthesia cannot verbalize their complaints, the anesthetic agents themselves can alter vital parameters (e.g. heart rate and blood pressure) and cutaneous signs in a completely draped patient may be missed. Secondly, the differential diagnosis of intraoperative anaphylaxis is wide. Conditions such as asthma exacerbation, arrhythmia, hemorrhage, angioedema, mastocytosis, acute myocardial infarction, drug overdose, pericardial tamponade, pulmonary edema, pulmonary embolus, sepsis, tension pneumothorax, vasovagal reaction, venous air embolism, laryngospasm, blood transfusion reaction and malignant hyperthermia need to be considered. Thirdly, the diagnostic workup is challenging due to the multiple medications administered and other exposures encountered such as latex and chlorhexidene. However, through a timely allergy consultation and a systematic approach, identification of the culprit agent and safe alternatives can be established to prevent future occurrences as illustrated in the case below.

Matched MeSH terms: Latex
Fulltext The rubber tree genome shows expansion of gene family associated with rubber biosynthesis

Lau NS, Makita Y, Kawashima M, Taylor TD, Kondo S, Othman AS, et al.

Sci Rep, 2016 06 24;6:28594.
PMID: 27339202 DOI: 10.1038/srep28594

Hevea brasiliensis Muell. Arg, a member of the family Euphorbiaceae, is the sole natural resource exploited for commercial production of high-quality natural rubber. The properties of natural rubber latex are almost irreplaceable by synthetic counterparts for many industrial applications. A paucity of knowledge on the molecular mechanisms of rubber biosynthesis in high yield traits still persists. Here we report the comprehensive genome-wide analysis of the widely planted H. brasiliensis clone, RRIM 600. The genome was assembled based on ~155-fold combined coverage with Illumina and PacBio sequence data and has a total length of 1.55 Gb with 72.5% comprising repetitive DNA sequences. A total of 84,440 high-confidence protein-coding genes were predicted. Comparative genomic analysis revealed strong synteny between H. brasiliensis and other Euphorbiaceae genomes. Our data suggest that H. brasiliensis's capacity to produce high levels of latex can be attributed to the expansion of rubber biosynthesis-related genes in its genome and the high expression of these genes in latex. Using cap analysis gene expression data, we illustrate the tissue-specific transcription profiles of rubber biosynthesis-related genes, revealing alternative means of transcriptional regulation. Our study adds to the understanding of H. brasiliensis biology and provides valuable genomic resources for future agronomic-related improvement of the rubber tree.

Matched MeSH terms: Latex/biosynthesis*
Identification of differentially expressed genes and signalling pathways in bark of Hevea brasiliensis seedlings associated with secondary laticifer differentiation using gene expression microarray

Loh SC, Thottathil GP, Othman AS

Plant Physiol Biochem, 2016 Oct;107:45-55.
PMID: 27236227 DOI: 10.1016/j.plaphy.2016.05.011

The natural rubber of Para rubber tree, Hevea brasiliensis, is the main crop involved in industrial rubber production due to its superior quality. The Hevea bark is commercially exploited to obtain latex, which is produced from the articulated secondary laticifer. The laticifer is well defined in the aspect of morphology; however, only some genes associated with its development have been reported. We successfully induced secondary laticifer in the jasmonic acid (JA)-treated and linolenic acid (LA)-treated Hevea bark but secondary laticifer is not observed in the ethephon (ET)-treated and untreated Hevea bark. In this study, we analysed 27,195 gene models using NimbleGen microarrays based on the Hevea draft genome. 491 filtered differentially expressed (FDE) transcripts that are common to both JA- and LA-treated bark samples but not ET-treated bark samples were identified. In the Eukaryotic Orthologous Group (KOG) analysis, 491 FDE transcripts belong to different functional categories that reflect the diverse processes and pathways involved in laticifer differentiation. In the Kyoto Encyclopedia of Genes and Genomes (KEGG) and KOG analysis, the profile of the FDE transcripts suggest that JA- and LA-treated bark samples have a sufficient molecular basis for secondary laticifer differentiation, especially regarding secondary metabolites metabolism. FDE genes in this category are from the cytochrome (CYP) P450 family, ATP-binding cassette (ABC) transporter family, short-chain dehydrogenase/reductase (SDR) family, or cinnamyl alcohol dehydrogenase (CAD) family. The data includes many genes involved in cell division, cell wall synthesis, and cell differentiation. The most abundant transcript in FDE list was SDR65C, reflecting its importance in laticifer differentiation. Using the Basic Local Alignment Search Tool (BLAST) as part of annotation and functional prediction, several characterised as well as uncharacterized transcription factors and genes were found in the dataset. Hence, the further characterization of these genes is necessary to unveil their role in laticifer differentiation. This study provides a platform for the further characterization and identification of the key genes involved in secondary laticifer differentiation.

Matched MeSH terms: Latex
Allergic contact dermatitis caused by latex gloves in a dental undergraduate student

Chaubal TV, Bapat RA, Patil PG, Shetty A

Contact Derm., 2016 Oct;75(4):256-7.
PMID: 27620128 DOI: 10.1111/cod.12625
Matched MeSH terms: Latex Hypersensitivity/complications*; Latex Hypersensitivity/diagnosis
Fulltext Large-scale collection of full-length cDNA and transcriptome analysis in Hevea brasiliensis

Makita Y, Ng KK, Veera Singham G, Kawashima M, Hirakawa H, Sato S, et al.

DNA Res, 2017 Apr 01;24(2):159-167.
PMID: 28431015 DOI: 10.1093/dnares/dsw056

Natural rubber has unique physical properties that cannot be replaced by products from other latex-producing plants or petrochemically produced synthetic rubbers. Rubber from Hevea brasiliensis is the main commercial source for this natural rubber that has a cis-polyisoprene configuration. For sustainable production of enough rubber to meet demand elucidation of the molecular mechanisms involved in the production of latex is vital. To this end, we firstly constructed rubber full-length cDNA libraries of RRIM 600 cultivar and sequenced around 20,000 clones by the Sanger method and over 15,000 contigs by Illumina sequencer. With these data, we updated around 5,500 gene structures and newly annotated around 9,500 transcription start sites. Second, to elucidate the rubber biosynthetic pathways and their transcriptional regulation, we carried out tissue- and cultivar-specific RNA-Seq analysis. By using our recently published genome sequence, we confirmed the expression patterns of the rubber biosynthetic genes. Our data suggest that the cytoplasmic mevalonate (MVA) pathway is the main route for isoprenoid biosynthesis in latex production. In addition to the well-studied polymerization factors, we suggest that rubber elongation factor 8 (REF8) is a candidate factor in cis-polyisoprene biosynthesis. We have also identified 39 transcription factors that may be key regulators in latex production. Expression profile analysis using two additional cultivars, RRIM 901 and PB 350, via an RNA-Seq approach revealed possible expression differences between a high latex-yielding cultivar and a disease-resistant cultivar.

Matched MeSH terms: Latex/biosynthesis*
Proteomics analysis of latex from Hevea brasiliensis (clone RRIM 600)

Habib MA, Yuen GC, Othman F, Zainudin NN, Latiff AA, Ismail MN

Biochem. Cell Biol., 2017 04;95(2):232-242.
PMID: 28177774 DOI: 10.1139/bcb-2016-0144

The natural rubber latex extracted from the bark of Hevea brasiliensis plays various important roles in today's modern society. Following ultracentrifugation, the latex can be separated into 3 layers: C-serum, lutoids, and rubber particles. Previous studies have shown that a large number of proteins are present in these 3 layers. However, a complete proteome for this important plant is still unavailable. Protein sequences have been recently translated from the completed draft genome database of H. brasiliensis, leading to the creation of annotated protein databases of the following H. brasiliensis biosynthetic pathways: photosynthesis, latex allergens, rubberwood formation, latex biosynthesis, and disease resistance. This research was conducted to identify the proteins contained within the latex by way of de novo sequencing from mass spectral data obtained from the 3 layers of the latex. Peptides from these proteins were fragmented using collision-induced dissociation, higher-energy collisional dissociation, and electron-transfer dissociation activation methods. A large percentage of proteins from the biosynthetic pathways (63% to 100%) were successfully identified. In addition, a total of 1839 unique proteins were identified from the whole translated draft genome database (AnnHBM).

Matched MeSH terms: Latex/chemistry*
Fulltext Angiographic anatomy of the extracranial and intracranial portions of the internal carotid arteries in donkeys

Khairuddin NH, Sullivan M, Pollock PJ

Ir Vet J, 2017 04 20;70:12.
PMID: 28439406 DOI: 10.1186/s13620-017-0090-0

BACKGROUND: In horses, the extracranial and intracranial pathway of the internal carotid artery has been described. The extracranial pathway of the internal carotid artery begins at the carotid termination and runs on the dorsal surface of the medial compartment of the guttural pouch. Thereafter the internal carotid artery passes through the foramen lacerum to continue intracranially, forming part of the rostrolateral quadrants of the cerebral arterial circle (Circle of Willis). The objectives of this study were to define and record the anatomy of the carotid arterial tree and the internal carotid artery in donkeys using angiographic techniques. This is a prospective descriptive study on 26 cadaveric donkeys.
METHODS: Twenty six donkey cadavers of mixed, age, sex and use presented for reasons unrelated to disease of the guttural pouch were subjected to carotid and cerebral angiography using rotational angiography. Rotational angiographic and 3 dimensional multiplanar reconstructive (3D-MPR) findings were verified with an arterial latex casting technique followed by dissection and photography.
RESULTS: The following variations of the carotid arterial tree were identified: [1] the internal carotid and occipital arteries shared a common trunk, [2] the linguofacial trunk originated from the common carotid artery causing the common carotid artery to terminate as four branches, [3] the external carotid artery was reduced in length before giving rise to the linguofacial trunk, mimicking the appearance of the common carotid artery terminating in four branches, [4] the internal carotid artery originated at a more caudal position from the common carotid artery termination.
CONCLUSION: Veterinarians should be aware that considerable variation exists in the carotid arterial tree of donkeys and that this variation may differ markedly from that described in the horse.

Matched MeSH terms: Latex
Identification of three homologous latex-clearing protein (lcp) genes from the genome of Streptomyces sp. strain CFMR 7

Nanthini J, Ong SY, Sudesh K

Gene, 2017 Sep 10;628:146-155.
PMID: 28711667 DOI: 10.1016/j.gene.2017.07.039

Rubber materials have greatly contributed to human civilization. However, being a polymeric material does not decompose easily, it has caused huge environmental problems. On the other hand, only few bacteria are known to degrade rubber, with studies pertaining them being intensively focusing on the mechanism involved in microbial rubber degradation. The Streptomyces sp. strain CFMR 7, which was previously confirmed to possess rubber-degrading ability, was subjected to whole genome sequencing using the single molecule sequencing technology of the PacBio® RS II system. The genome was further analyzed and compared with previously reported rubber-degrading bacteria in order to identify the potential genes involved in rubber degradation. This led to the interesting discovery of three homologues of latex-clearing protein (Lcp) on the chromosome of this strain, which are probably responsible for rubber degrading activities. Genes encoding oxidoreductase α-subunit (oxiA) and oxidoreductase β-subunit (oxiB) were also found downstream of two lcp genes which are located adjacent to each other. In silico analysis reveals genes that have been identified to be involved in the microbial degradation of rubber in the Streptomyces sp. strain CFMR 7. This is the first whole genome sequence of a clear-zone-forming natural rubber- degrading Streptomyces sp., which harbours three Lcp homologous genes with the presence of oxiA and oxiB genes compared to the previously reported Gordonia polyisoprenivorans strain VH2 (with two Lcp homologous genes) and Nocardia nova SH22a (with only one Lcp gene).

Matched MeSH terms: Latex
Use of ammonium-enriched skim latex serum to compost rubber biomass wastes and its effect on planting brassica alboglabra

Jutarut Iewkittayakorn, Juntima Chungsiriporn, Prukraya Pongyeela

Sains Malaysiana, 2017;46:1763-1769.

Ammonium-enriched skim latex serum - used for absorption of contaminating ammonia gas - when composted with other rubber tree wastes, is promising as a good compost. The objective of this research was to utilize ammonium-enriched skim latex serum (S) as a raw composting ingredient after being combined with para sawdust (W1) and para rubber leaves (W2). Several ratios of S, W1 and W2 were experimented in a 15L composting vessel to determine the most effective compost. The best ratio was found to be 3:1:3 by weight at 12-day retention. The modified 30 L composting reactor employed with the derived optimum mixing conditions yielded N, P and K of 2.40, 1.51 and 14.84 %w/w. The growth of Brassica alboglabra after application of this compost combined with a chemical fertilizer generated the highest fresh weight (4.48 g/plant). Thus, compost from these wastes could be used as a fertilizer and logically should contribute to cost saving of waste disposal.

Matched MeSH terms: Latex
Fulltext Evaluation of cold in-place recycling mix using polymer modified Asphalt emulsion

Ahmad Kamil Arshad, Juraidah Ahmad, Mohd Izzat Asyraf Mohamad Kamal

Pertanika Journal of Science & Technology, 2017;25(107):219-226.
MyJurnal

This paper details a study conducted to evaluate the performance of cold in-place recycling (CIPR) using polymer modified asphalt emulsion (PMAE). The asphalt emulsion was modified using natural rubber latex (NRL). Four proportions of reclaimed asphalt pavement (RAP) which are 0%, 25%, 50% and 75% were mixed with natural aggregates and modified asphalt emulsion using natural rubber latex (NRL). The results showed that the optimum modified asphalt emulsion for each proportion of RAP decreased due to the increase in RAP content. Results obtained from Indirect Tensile Strength (ITS) and Uniaxial Compressive Strength (UCS) test for the mixes complied with the requirements of the Road Engineering Association of Malaysia (REAM) specifications. The unsoaked and soaked ITS values obtained were 0.2 MPa and 0.15 MPa respectively, and the minimum compressive strength of CIPR mix obtained was 0.7 MPa. Based on the evaluation of performance for the four RAP proportions, it was determined that 50% of RAP gave the best combination of the CIPR mixture.

Matched MeSH terms: Latex
Fulltext Von Willebrand factor profiles of the different ABO blood groups among Malay population

Rohaida Abd Rahman, Faridah Afandi, Tun Maizura Mohd Fathullah, Rafeezul Mohamed

Journal of Biomedical and Clinical Sciences, 2017;2(202):40-41.
MyJurnal

The National Blood Center, Kuala Lumpur interprets laboratory results for the von Willebrand factor (vWF) profile based on guidelines provided by the U.S. National Heart, Lung, and Blood Institute, which were established based on the Caucasian population [1-2]. The vWF profiles among the Malay population has not yet been established.

The goals of this study were to determine the vWF profiles of the different ABO blood types among Malays and to evaluate their association with demographic characteristics and smoking habits.

One hundred and forty Malay donors participated in this study. Factor VIII (FVIII), vWF antigen, and ristocetin cofactor (RiCof) levels and collagen binding activity (CBA) were measured by coagulometric clot detection, latex agglutination, and enzyme-linked immunosorbent assay.

Matched MeSH terms: Latex
Fulltext Safety evaluation test on human for radiation Prevulcanized Natural Rubber Latex (RVNRL)

Pairu Ibrahim, Wan Manshol Wan Zain, Chai, Chee Keong, Sofian Ibrahim, Mohd Noorwadi Mat Lazim, Saadiah Sulaiman

Jurnal Sains Nuklear Malaysia, 2017;29(1):28-36.
MyJurnal

A safety evaluation test on human for latex films made from Radiation Prevulcanized Natural Rubber Latex (RVNRL) with sulfur-containing antioxidant was studied. Sulfur test has confirmed that there was sulfur compound presence in RVNRL derived from antioxidant used in this study. Two types of safety evaluation test were being adopted which are Patch Test and Modified Draize-95 test and this test proved that there is no clinical evidence on the presence of sulfur compound in RVNRL that may induce Type IV allergy in the unsensitized general user population. Both clinical test shows that the highest score value produced by test subjects is 1 and not exceed the allowable limit.

Matched MeSH terms: Latex
Fulltext Microgrids: A Model for Basic Microsurgery Skills Training

Gunasagaran J, Rasid RJ, Mappiare S, Devarajooh C, Ahmad TS

Malays Orthop J, 2018 Jul;12(2):37-41.
PMID: 30112127 MyJurnal DOI: 10.5704/MOJ.1807.007

Introduction: Microsurgery is a subspecialised field which requires high technical skill. Laboratory training offers good opportunity for novice surgeons to learn and repetitively practise their skills prior to hands-on clinical practice. Commonly, the training programme consists of models in a stepwise increase in fidelity: from latex sheet to anaesthetised rat. We introduce microgrids model as a daily warm up procedure in a 5-day basic microsurgery course. The purpose of this study is to evaluate the correlation between microgrids colouring under magnification with microsuturing proficiency among novice surgeons. Materials and Methods: Participants were required to fill in microgrids under magnification everyday during their 5-day training as a starter test. The number of completely filled in microgrids in 20 seconds was recorded. A simulated cut on latex sheet was sutured and the time taken to apply five sutures was recorded. The sutures were evaluated with modified Global Rating Scale (GRS). Data was analysed with SPSS. Results: There was a statistically significant correlation between the number of microgrids coloured and the time taken to apply five sutures (p<0.01). An increase in number of microgrids coloured was significantly associated with the increase in quality of the suturing technique (p< 0.01). During the 5-day basic microsurgery skills training for novice surgeons, microsuturing skill improvement correlated with microgrid colouring. Conclusion: Microgrids colouring reflected microsuturing proficiency. It is an inexpensive, readily available, and simple model of 'warm up' for hand dexterity. The microgrids model can function as a starter test for initial training and a quick screening measure to assess microsurgical skill.

Matched MeSH terms: Latex

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links