Displaying publications 81 - 100 of 129 in total

Abstract:
Sort:
  1. Din MF, Ponraj M, Low WP, Fulazzaky MA, Iwao K, Songip AR, et al.
    Water Environ Res, 2016 Feb;88(2):118-30.
    PMID: 26803100 DOI: 10.2175/106143015X14362865227913
    In this study, the removal of natural organic matter (NOM) using coconut fiber (CF) and palm oil fiber (POF) was investigated. Preliminary analysis was performed using a jar test for the selection of optimal medium before the fabricated column model experiment. The equilibrium studies on isotherms and kinetic models for NOM adsorption were analyzed using linearized correlation coefficient. Results showed that the equilibrium data were fitted to Langmuir isotherm model for both CF and POF. The most suitable adsorption model was the pseudo-first-order kinetic model for POF and pseudo-second-order kinetic model for CF. The adsorption capacities achieved by the CF and POF were 15.67 and 30.8 mg/g respectively. Based on this investigation, it can be concluded that the POF is the most suitable material for the removal of NOM in semi polluted river water.
    Matched MeSH terms: Cocos
  2. Saat M, Singh R, Sirisinghe RG, Nawawi M
    J Physiol Anthropol Appl Human Sci, 2002 Mar;21(2):93-104.
    PMID: 12056182
    This is to cross-over study to assess the effectiveness of fresh young coconut water (CW), and carbohydrate-electrolyte beverage (CEB) compared with plain water (PW) for whole body rehydration and blood volume (BV) restoration during a 2 h rehydration period following exercise-induced dehydration. Eight healthy male volunteers (mean age and VO2max of 22.4 +/- 3.3 years and 45.8 +/- 1.5 ml min kg-1 respectively) exercised at 60% of VO2max in the heat (31.1 +/- 0.03 degrees C, 51.4 +/- 0.1% rh) until 2.78 +/- 0.06% (1.6 +/- 0.1 kg) of their body weight (BW) was lost. After exercise, the subjects sat for 2 h in a thermoneutral environment (22.5 +/- 0.1 degrees C; 67.0 +/- 1.0% rh) and drank a volume of PW, CW and CEB on different occasions representing 120% of the fluid loss. A blood and urine sample, and the body weight of each subject was taken before and after exercise and at 30 min intervals throughout a rehydration period. Each subject remained fasted throughout rehydration. Each fluid was consumed in three portions in separate trials representing 50% (781 +/- 47 ml), 40% (625 +/- 33 ml) and 30% (469 +/- 28 ml) of the 120% fluid loss at 0, 30 and 60 min of the 2 h rehydration period, respectively. The drinks given were randomised. In all the trials the subjects were somewhat hypohydrated (range 0.08-0.18 kg BW below euhydrated BW; p > 0.05) after a 2 h rehydration period since additional water and BW were lost as a result of urine formation, respiration, sweat and metabolism. The percent of body weight loss that was regained (used as index of percent rehydration) during CW, PW, and CEB trials was 75 +/- 5%, 73 +/- 5% and 80 +/- 4% respectively, but was not statistically different between trials. The rehydration index, which provided an indication of how much of what was actually ingested was used for body weight restoration, was again not different statistically between trials (1.56 +/- 0.14, 1.36 +/- 0.13 and 1.71 +/- 0.21 for CW, CEB and PW respectively). Although BV restoration was better with CW, it was not statistically different from CEB and PW. Cumulative urine output was similar in all trials. There were no difference at any time in serum Na+ and Cl-, serum osmolality, and net fluid balance between the three trials. Urine osmolality decreased after 1 h during the rehydration period and it was lowest in the PW trial. Plasma glucose concentrations were significantly higher compared with PW ingestion when CW and CEB were ingested during the rehydration period. CW was significantly sweeter, caused less nausea, fullness and no stomach upset and was also easier to consume in a larger amount compared with CEB and PW ingestion. In conclusion, ingestion of fresh young coconut water, a natural refreshing beverage, could be used for whole body rehydration after exercise.
    Matched MeSH terms: Cocos
  3. Ismail I, Arliyani, Jalil Z, Mursal, Olaiya NG, Abdullah CK, et al.
    Polymers (Basel), 2020 Sep 28;12(10).
    PMID: 32998404 DOI: 10.3390/polym12102236
    Conventionally, panel boards are produced with material flex or microparticle with P.U. or U.F. as adhesives. However, in this study, nanoparticle with epoxy resin as an adhesive was used to produce nanoboard. Coconut shell nanoparticle composite with epoxy resin as an adhesive was prepared using a compression molding technique. The coconut shell particles were originally 200 mesh size and then milled mechanically with a ball mill for the duration of 10, 20, 30, and 40 h (milling times) to produce nanoparticles. The composition ratio of the composite is 85 vol.% of coconut shell and 15 vol.% of epoxy resin. The formation of nanoparticles was observed with transmission electron microscopy (TEM). The mechanical, physical, and microstructure properties of the composite were examined with X-ray diffraction, scanning electron microscopy, atomic force microscopy, and universal testing machine. The results established that the properties of the composite (microstructures, mechanical, and physical) are influenced by the duration of milling of coconut shell particles. The modulus and flexural strength of the composite improved with an increase in the milling time. The density, thickness swelling, and porosity of the composite were also influenced by the milling times. The result suggested that the composite properties were influenced by the particle size of the coconut shell. The coconut shell nanoparticle composite can be used in the manufacturing of hybrid panels and board.
    Matched MeSH terms: Cocos
  4. Ong AL, Teh CK, Mayes S, Massawe F, Appleton DR, Kulaveerasingam H
    Plants (Basel), 2020 Nov 03;9(11).
    PMID: 33152992 DOI: 10.3390/plants9111476
    Oil palm (Elaeis guineensis Jacq.) is the most traded crop among the economically important palm species. Here, we report an extended version genome of E. guineensis that is 1.2 Gb in length, an improvement of the physical genome coverage to 79% from the previous 43%. The improvement was made by assigning an additional 1968 originally unplaced scaffolds that were available publicly into the physical genome. By integrating three ultra-dense linkage maps and using them to place genomic scaffolds, the 16 pseudomolecules were extended. As we show, the improved genome has enhanced the mapping resolution for genome-wide association studies (GWAS) and permitted further identification of candidate genes/protein-coding regions (CDSs) and any non-coding RNA that may be associated with them for further studies. We then employed the new physical map in a comparative genomics study against two other agriculturally and economically important palm species-date palm (Phoenix dactylifera L.) and coconut palm (Cocos nucifera L.)-confirming the high level of conserved synteny among these palm species. We also used the improved oil palm genome assembly version as a palm genome reference to extend the date palm physical map. The improved genome of oil palm will enable molecular breeding approaches to expedite crop improvement, especially in the largest subfamily of Arecoideae, which consists of 107 species belonging to Arecaceae.
    Matched MeSH terms: Cocos
  5. Mariam-Aisha Fatima, Muhammad Fahmi Mehdin, Nurain Nasrudin, Neelam Shahab
    MyJurnal
    Lignocellulosic biomass, found in wooden plant husks is a potent renewable material source which can be utilised to form various chemicals and biomaterials including polyols such as xylitol. Xylitol has been used commercially as an alternative to sucrose in many products as bulk sweetener in non-cariogenic confectionery as well as in diabetic diets and solutions for parenteral nutrition. Therefore, this study aims to optimise separation parameters of the Shimadzu high performance liquid chromatography (HPLC) (Model No: LC-20A) and quantify the potential of coconut husk as substrate for Candida albicans in producing xylitol using HPLC. Pretreatment to depolymerise components of biomass i.e. cellulose, hemicellulose and lignin were done using dilute acid hydrolysis method which yielded fermentable reducing sugars, xylose. Xylose is a monosaccharide with an aldehyde functional group, a reducing sugar which is then utilised and fermented by the yeast Candida albicans to form xylitol. In this study, the media used for fermenting pretreated coconut husk and Candida albicans is a synthetic defined (SD) minimal broth. Growth curves against concentration of reducing sugar were plotted to determine utilisation and production trends with specific mixes of carbon sources. The presence of reducing sugars were tested using 3,5-dinitrosalicylic acid (DNS) assay in pretreated coconut husk yielded 13.22 g/L. In order to analyse the product with HPLC, an existing protocol is modified for Hypersil GOLD™ C18 column with acetonitrile as the mobile phase. Results obtained from HPLC analyses using developed protocol suggested the formation of xylitol from the fermentation of pretreated husk by Candida albicans. These can be followed by purification of fermented media in obtaining a better separation of contaminating peaks.

    Matched MeSH terms: Cocos
  6. Nurhazirah Salehen, Nurzafirah Mazlan, Oon, Chuah Li, Siti Marwanis Anua,, Young, Thung Tze
    MyJurnal
    Probiotics has been discovered long time ago for its beneficial effect on health when consumed especially to the people who had allergy and gastrointestinal disease. This preliminary study was conducted to find out which vehicles can allow better growth of probiotic. Lactobacillus plantarum was used in this study as choice of probiotic to be cultured in the four types of milk. The pH value was recorded for determination of growths and metabolic activity of the probiotic. Results showed that L. plantarum in soy milk can grow and had a better metabolic activity in the cultured soy milk with pH 3.46 compared to others. The highest growth was recorded at optical density of 1.137 in soy milk at 560nm. This result showed that L. plantarum in soy milk multiply rapidly compared to other milks. As conclusion, soy milk has better development of probiotic as delivery vehicles compare to cow milk, goat milk and coconut milk.
    Matched MeSH terms: Cocos
  7. Ikumapayi OM, Akinlabi ET
    Data Brief, 2019 Feb;22:537-545.
    PMID: 30627604 DOI: 10.1016/j.dib.2018.12.067
    Coconut Shell (CS) as agricultural lignocellulosic biomaterial and agro-waste is predominantly available in India, Malaysia, Nigeria, Thailand, Sri Lanka, and Indonesia. It has proven to have effective durability characteristic, good abstractive resistance, high toughness, and good adsorption properties, and is most suitable for long standing use in many applications such as reinforcement, source of energy, fillers as well as activated carbon and its performance, efficiency and effectiveness depend wholly on whether is in form of nano-, micro-, and macro- particles. In this data, effects of milling time on morphological characteristics was experimented using Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), and X-Ray Fluorescence (XRF) analyses. The SEM images were taken at magnifications of 1.00kx, 2.00kx and 5.00kx which gives respective 50 µm, 20 µm and 10 µm in different milling time of 0, 20, 40 and 60 mins. Digital Vibratory Disc Milling Machine (VDMM) rated 380 V/50 Hz at 940 rpm was employed for the grinding and the morphology of the milled nanoparticles were characterised. It was revealed from the data collected that 0 min (i.e. 75 µm sieved) has the highest mean area value of 16.105 µm2 and area standard deviation of 200.738 µm2 with least value of a number of particle size distribution of 809 µm. In contrast, 60 mins milled has the lowest values for mean area and area standard deviation of 8.945 µm2 and 115.851 µm2 respectively with the highest number of particle size distribution of 2032 µm. It was observed that milling time increases the number of particle sizes distributions and reduces the area of particle size.
    Matched MeSH terms: Cocos
  8. Nur Atirah Hasmi, Siti Sarah Azman, Nadia Nisha Musa, Wan Nurul Hidayah Wan Anuar, Nur Nadirah Rodzali
    Jurnal Inovasi Malaysia, 2020;4(1):99-111.
    MyJurnal
    The potential of natural organic compounds as a repellent in biodegradable organic pot is budding into one of the new agriculture innovation. The use of recyclable materials in the production of the pot can reduce the excessive waste disposal problem and thus prevent pollution problems. The objectives are to recycle old newspapers into biodegradable pot for seedling of plants and to repel plant insect pests using organic compounds (Pandanus sp., Petroselinum crispum and Alium sativum). The production of the biodegradable pot incorporates the use of waste materials such as old newspapers and coconut husk together with natural organic materials such as tapioca flour, Pandanus amaryllifolius (pandan leaf), Petroselinum crispum (parsley) and Alium sativum (garlic). This product is distinguishable among others as it is environmental-friendly since the pot can naturally break over time (biodegradable). The aroma from the Pandanus amaryllifolius, Petroselinum crispum and Alium sativum can repel flying and crawling insect that may attack the crops. The organic insect-repellent biodegradable pot has a potential in replacing plastic polybags since the crops planted in the pot can be directly replanted in the soil without the need of disposing the pot. Root is allowed to grow through the pot where later on, it will be degraded. Apart from that, this pot has high commercial values since it is easy to be handled, low in production cost, eco-friendly where only recyclable and natural organic materials were used, and the most crucial point is it can act as an insect repellent.
    Matched MeSH terms: Cocos
  9. Etebari K, Filipović I, Rašić G, Devine GJ, Tsatsia H, Furlong MJ
    Virus Res, 2020 03;278:197864.
    PMID: 31945420 DOI: 10.1016/j.virusres.2020.197864
    Oryctes rhinoceros nudivirus (OrNV) has been an effective biocontrol agent against the insect pest Oryctes rhinoceros (Coleoptera: Scarabaeidae) for decades, but there is evidence that resistance could be evolving in some host populations. We detected OrNV infection in O. rhinoceros from Solomon Islands and used Oxford Nanopore Technologies (ONT) long-read sequencing to determine the full length of the virus genomic sequence isolated from an individual belonging to a mitochondrial lineage (CRB-G) that was previously reported as resistant to OrNV. The complete circular genome of the virus consisted of 125,917 nucleotides, 1.698 bp shorter than the originally-described full genome sequence of Ma07 strain from Malaysia. We found 130 out of 139 previously annotated ORFs (seven contained interrupted/non-coding sequences, two were identified as duplicated versions of the existing genes), as well as a putatively inverted regions containing four genes. These results demonstrate the usefulness of a long-read sequencing technology for resolving potential structural variations when describing new virus isolates. While the Solomon Islands isolate exhibited 99.41 % nucleotide sequence identity with the originally described strain, we found several genes, including a core gene (vlf-1), that contained multiple amino acid insertions and/or deletions as putative polymorphisms of large effect. Our complete annotated genome sequence of a newly found isolate in Solomon Islands provides a valuable resource to help elucidate the mechanisms that compromise the efficacy of OrNV as a biocontrol agent against the coconut rhinoceros beetle.
    Matched MeSH terms: Cocos
  10. Almaliky BSA, Abidin MAZ, Kader J, Wong MY
    Plant Dis, 2013 Jan;97(1):143.
    PMID: 30722276 DOI: 10.1094/PDIS-07-12-0627-PDN
    In April and June 2010, coconut seedlings with symptoms of very slow growth, yellowing of leaves, and general abnormal leaf growth were observed in germination beds in Teluk Intan, Perak, Malaysia. The roots were soft, rotten, and brown, extending upward and downward from these lesions. Rhizomorphs and basidiocarps were produced on coconut seeds near the germination eye and identified as Marasmiellus palmivorus according description by Turner (2). Three isolates were obtained by plating surface sterilized symptomatic roots and basidiocarp on malt extract agar (MEA) amended with 85% lactic acid (1 ml added to 11 of the medium). To confirm the identity of the fungus, genomic DNA was extracted from mycelia and basidiocarps of isolates and the large subunit (LSU) region was amplified and sequenced using LR0R/LR7 primers (3). All isolates had identical LSU sequences (GenBank Accession No. JQ654233 to JQ654235). Sequences were identical to each other and 99% similar to a M. palmivorus sequence deposited in the NCBI database (Accession No. AY639434).To confirm pathogenicity, three isolates of M. palmivorus that were obtained from symptomatic plant tissue was inoculated onto seeds of Malaysian Red Dwarf variety. Each isolate was grown in 100 ml of malt extract broth in 250 ml Erlenmeyer flasks and incubated at 27 ± 2°C for 5 days on an orbital shaker (125 rpm). The resulting culture was passed through two layers of sterile cloth. Mycelial suspension was obtained by blending mycelia in 100 ml of sterile water. Seeds were sterilized by soaking in 10% v/v sodium hypochlorite in distilled water for 3 min. The seeds were then rinsed three times over running tap water. The calyx portion of the seed was removed and five holes were made around the germination eye. The seeds were inoculated by injecting 2 ml of suspension into each hole. The control seeds were inoculated with sterile distilled water only. The seeds were transferred to 40-cm diameter plastic pots containing a mixture of sand, soil, and peat in the ratio of 3:2:1, respectively, and steam treated at 100°C for 1.5 h. Pots were placed in the glasshouse with normal exposures to day-night cycles, temperatures of 29 ± 4°C, and high relative humidity (85 to 95%) achieved by spraying water twice daily. After 2 months, 75% of the inoculated seeds failed to germinate. It was speculated that the artificial inoculum was higher than under germination bed conditions. Rhizomorphs and basidiocarps were produced on husk seeds near the germination eye. Seedlings that emerged successfully developed symptoms similar to those observed in the germination bed. No symptoms developed in the noninoculated seeds and seedlings. At 80 days post inoculation, basidiocarps were observed emerging from three diseased seedlings near the germination eye. Three reisolations were made on MEA from root lesions surface sterilized. Pathogenicity tests and LSU sequence analyses indicated that M. palmivorus is the causal agent of the symptoms observed on coconut seedlings. M. palmivorus was first recorded on coconuts and oil palm in the 1920s (1) and attacks the fruit and the petiole on oil palm (2). To our knowledge, this is the first report of M. palmivorus causing post-emergence damping off on coconut seedlings. References: (1) K. G. Singh. A check-list of host and diseases in Malaysia. Ministry of Agriculture and Fisheries, Malaysia, 1973. (2) P. D. Turner. Oil palm diseases and disorders. Oxford University Press. 1981. (3) R. Vilgalys et al. J. Bacteriol. 172:4238, 1990.
    Matched MeSH terms: Cocos
  11. Norhasnan NHA, Hassan MZ, Nor AFM, Zaki SA, Dolah R, Jamaludin KR, et al.
    Polymers (Basel), 2021 Apr 06;13(7).
    PMID: 33917337 DOI: 10.3390/polym13071171
    Utilizing agro-waste material such as rice husk (RH) and coco peat (CP) reinforced with thermoplastic resin to produce low-cost green composites is a fascinating discovery. In this study, the effectiveness of these blended biocomposites was evaluated for their physical, mechanical, and thermal properties. Initially, the samples were fabricated by using a combination of melt blend internal mixer and injection molding techniques. Increasing in RH content increased the coupons density. However, it reduced the water vapor kinetics sorption of the biocomposite. Moisture absorption studies disclosed that water uptake was significantly increased with the increase of coco peat (CP) filler. It showed that the mechanical properties, including tensile modulus, flexural modulus, and impact strength of the 15% RH-5% CP reinforced acrylonitrile-butadiene-styrene (ABS), gave the highest value. Results also revealed that all RH/CP filled composites exhibited a brittle fracture manner. Observation on the tensile morphology surfaces by using a scanning electron microscope (SEM) affirmed the above finding to be satisfactory. Therefore, it can be concluded that blend-agriculture waste reinforced ABS biocomposite can be exploited as a biodegradable material for short life engineering application where good mechanical and thermal properties are paramount.
    Matched MeSH terms: Cocos
  12. Nurul Syafiqah Senafi, Nor Zalipah Mohamed
    MyJurnal
    Red Palm Weevil (RPW), Rhynchophorus ferrugineus is a lethal pest which has been described as a serious pest that reduces the production of coconut tree and other major cultivated palms. RPW infestation was initially detected by Department of Agriculture (DOA) in 2007 in all eight Terengganu districts. Rhu Tapai plantation area is one of the highly infested areas in Terengganu. Until now, limited reports on population abundance of this lethal pest have been discussed particularly in Rhu Tapai. Therefore, a study on population abundance is a must in order to understand the population dynamic of RPW which will be the first step of its control strategy. A total of 12 traps were installed and synthetic pheromones (P028 Ferrolure+) were used in attracting the RPW adults. Overall, 81 individuals of RPW were successfully collected after 16 weeks of pheromone trapping (3rd September until 28th November 2018). The trend of weekly RPW captured was eventually decreasing from Week 1 to Week 16 but showed a sudden increment in Week 10. Pandan cultivar plot captured the highest number of adult RPW compared with Mawa cultivar plots. Result showed no significant difference between RPW sexes percentage of sexes which was 53% of male and 47% of female (1:1 ratio) (U= 0.143, p > 0.05). Daily rainfall and temperature significantly reduced the trapping efficiency (R²rainfall = 0.142, p = 0.145; R²temperature = 0.0858; p = 0.258). These results will be the baseline information for future study regarding control management strategy using pheromone-based mass trapping system.
    Matched MeSH terms: Cocos
  13. Arlee, R., Suanphairoch, S., Pakdeechanuan, P.
    MyJurnal
    Chumphon Horticultural Research Centre (CHRC) is Thailand’s main coconut research unit. CHRC has developed three coconut cultivars: Sawi Hybrid No. 1 (Malayan Yellow Dwarf x West African Tall: MYD x WAT), Chumphon Hybrid No. 60 (Thai Tall: THT x WAT) and Chumphon Hybrid No. 2 (MYD x THT). This study compared some chemical components in virgin coconut oil (VCO) from coconut hybrids with their parents. The VCO was extracted by cold pressing and fermentation methods, and was analyzed for fatty acid profiles, triacylglycerol profile, acid value, tocopherol content, total phenolic content, and antioxidant activity against DPPH (1,1-diphenyl-2-picrylhydrazyl) radicals. The findings showed that hybrids contained lauric acid ranging from 46.63 to 48.34% of total fatty acid. Chumphon 60 had the highest lauric acid content, 48.34% of total fatty acids, which was not significantly different (p > 0.05) from that of the parents. In contrast, the cultivars from MYD, Sawi 1 and Chumphon 2, had significantly greater lauric acid content than the parent MYD (p ≤ 0.05). Cold pressing and fermentation provided an oil extraction yield of 25 and 20%, respectively. The proportions of lauric acid in VCO from these two methods were not significantly different (p > 0.05), but the cold pressing method resulted in higher tocopherol content (p ≤ 0.05). The VCO of Chumphon 60 from the cold pressed method had tocopherol content close to that of the parent WAT (p > 0.05) but significantly higher than that of the other parent THT (p ≤ 0.05). In addition, it contained the highest total phenolic contents among the three cultivars, 57.89 mg GAE/100 g oil, leading to antioxidant activity with a low EC50 of 0.53 mg GAE/ml. Overall, the hybrid of WAT x THT, Chumphon 60, was outstanding among the cultivars; it had the highest levels of lauric acid, total phenolic compounds, and antioxidant activity.
    Matched MeSH terms: Cocos
  14. Mohd Nor N'N, Abbasiliasi S, Marikkar MN, Ariff A, Amid M, Lamasudin DU, et al.
    J Food Sci Technol, 2017 Jan;54(1):164-173.
    PMID: 28242914 DOI: 10.1007/s13197-016-2448-9
    This paper reports on the extraction, partial characterization and the potential application of crude polysaccharides from defatted coconut residue as a prebiotic. The coconut residue was defatted and extracted to obtain the crude polysaccharides and its physicochemical properties were determined. The crude polysaccharides were assessed for monosaccharide composition, total carbohydrate content, reducing sugar concentration and protein content determination. The functional group and structural elucidation of crude polysaccharides was also done using Fourier transform infrared spectra analysis. The product was then subjected to artificial human gastric juice treatment to determine digestibility. Finally, an in vitro proliferation and acid production by two probiotic bacteria namely Lactobacillus casei Shirota and Lactobacillus bulgaricus were included in this study. It was found that the defatted coconut residue contained ash (0.54%), moisture (55.42%), protein (1.69%), crude fat (17.26%) and carbohydrate (25.73%). The percentage of crude polysaccharides extracted was 0.73 ± 0.04. The two fractions of monosaccharides obtained were glucose and fructose. Total carbohydrate content of DCR was 13.35% (w/v). The quantitative value of the reducing sugars obtained was 20.71%. Protein content in the crude polysaccharides was 0.009% and the peaks which indicated the presence of protein were observed at around 1640 cm(-1) (amide I) and 1530 cm(-1) (amide II). DCR crude polysaccharides were highly resistant (88%) to hydrolysis when subjected to artificial human gastric juice. The product was found to markedly stimulate two tested probiotics to proliferate and produce organic acids. All the above findings are supportive of the fact that polysaccharides extracted from DCR, an industrial waste, have a vast potential to be exploited as novel prebiotics.
    Matched MeSH terms: Cocos
  15. Umar Kassim, Omar Mohd Rohim
    MyJurnal
    In accordance upon conservation efforts, this research emphasizes on prevention of
    environmental pollution and considers the elements of sustainable of infrastructure
    construction materials, which is interlocking pavement block. The development of this
    innovative product apply the concept of 3Rs and waste to wealth by using the
    agricultural waste product, coconut shell, where widely available with very minimum
    cost worldwide especially in tropical country such as India, Indonesia, Philippines,
    Thailand and Malaysia. The main objective of this research is to produce an
    environmental friendly product with a good quality, low cost and lightweight known as
    Green Interlocking Pavement (GIP Block). The chemical composition of coconut shell
    ash and ordinary Portland cement being identified and compared to know whether it
    is able to react as a good binder in the mixture or not. The quality of GIP Block
    considered is compressive strength, water absorption and bulk density. All the blocks
    were curing in seven and 28 days before implementing the entire test. The existing
    interlocking pavement used as bench mark and GIP Block 0% of proportion of coconut
    shell ash used as control variables. The specimen of the interlocking pavement
    prepared in this research is 10%, 20% and 30% proportion of coconut shell ash to
    partially replace the quantity of cement. The ratio of the interlocking pavement apply
    in this research is 1:2 which stand for one part cement and two part of sand. The
    findings withdrawn from this research are: first, the chemical characteristic of the
    coconut shell ash and cement. Second, the value of bulk density slightly reduces as the
    percentage of coconut shell ash increases. Third, the additional of coconut shell ash to
    partially replace the quantity of cement in the product reduce the compressive
    strength and increase the percentage of water absorption.
    Matched MeSH terms: Cocos
  16. Mohamad NE, Keong Yeap S, Beh BK, Romli MF, Yusof HM, Kristeen-Teo YW, et al.
    J Sci Food Agric, 2018 Jan;98(2):534-540.
    PMID: 28631270 DOI: 10.1002/jsfa.8491
    BACKGROUND: Vinegar is widely used as a food additive, in food preparation and as a food supplement. This study compared the phenolic acid profiles and in vivo toxicities, and antioxidant and immunomodulatory effects of coconut, nipah and pineapple juice vinegars, which were respectively prepared via a two-step fermentation using Saccharomyces cerevisiae 7013 INRA and Acetobacter aceti vat Europeans.

    RESULTS: Pineapple juice vinegar, which had the highest total phenolic acid content, also exhibited the greatest in vitro antioxidant capacity compared to coconut juice and nipah juice vinegars. Following acute and sub-chronic in vivo toxicity evaluation, no toxicity and mortality were evident and there were no significant differences in the serum biochemical profiles between mice administered the vinegars versus the control group. In the sub-chronic toxicity evaluation, the highest liver antioxidant levels were found in mice fed with pineapple juice vinegar, followed by coconut juice and nipah juice vinegars. However, compared to the pineapple juice and nipah juice vinegars, the mice fed with coconut juice vinegar, exhibited a higher population of CD4+ and CD8+ T-lymphocytes in the spleen, which was associated with greater levels of serum interleukin-2 and interferon-γ cytokines.

    CONCLUSIONS: Overall, the data suggested that not all vinegar samples cause acute and sub-chronic toxicity in vivo. Moreover, the in vivo immunity and organ antioxidant levels were enhanced, to varying extents, by the phenolic acids present in the vinegars. The results obtained in this study provide appropriate guidelines for further in vivo bioactivity studies and pre-clinical assessments of vinegar consumption. © 2017 Society of Chemical Industry.

    Matched MeSH terms: Cocos/metabolism; Cocos/microbiology; Cocos/chemistry*
  17. Zulkefli NN, Masdar MS, Wan Isahak WNR, Md Jahim J, Md Rejab SA, Chien Lye C
    PLoS One, 2019;14(2):e0211713.
    PMID: 30753209 DOI: 10.1371/journal.pone.0211713
    Adsorption technology has led to the development of promising techniques to purify biogas, i.e., biomethane or biohydrogen. Such techniques mainly depend on the adsorbent ability and operating parameters. This research focused on adsorption technology for upgrading biogas technique by developing a novel adsorbent. The commercial coconut shell activated carbon (CAC) and two types of gases (H2S/N2 and H2S/N2/CO2) were used. CAC was modified by copper sulfate (CuSO4), zinc acetate (ZnAc2), potassium hydroxide (KOH), potassium iodide (KI), and sodium carbonate (Na2CO3) on their surface to increase the selectivity of H2S removal. Commercial H2S adsorbents were soaked in 7 wt.% of impregnated solution for 30 min before drying at 120°C for 24 h. The synthesized adsorbent's physical and chemical properties, including surface morphology, porosity, and structures, were characterized by SEM-EDX, FTIR, XRD, TGA, and BET analyses. For real applications, the modified adsorbents were used in a real-time 0.85 L single-column adsorber unit. The operating parameters for the H2S adsorption in the adsorber unit varied in L/D ratio (0.5-2.5) and feed flow rate (1.5-5.5 L/min) where, also equivalent with a gas hourly space velocity, GHSV (212.4-780.0 hour-1) used. The performances of H2S adsorption were then compared with those of the best adsorbent that can be used for further investigation. Characterization results revealed that the impregnated solution homogeneously covered the adsorbent surface, morphology, and properties (i.e., crystallinity and surface area). BET analysis further shows that the modified adsorbents surface area decreased by up to 96%. Hence, ZnAc2-CAC clarify as the best adsorption capacity ranging within 1.3-1.7 mg H2S/g, whereby the studied extended to adsorption-desorption cycle.
    Matched MeSH terms: Cocos
  18. Masilaman D, Mazira Che Mat, Chuah TS
    Sains Malaysiana, 2017;46:1171-1182.
    ntroduction of new weed management strategy for coconut plantation in Malaysia is essential since the current weed control methods are less effective and highly herbicide dependent, thus leading to development of herbicide resistance in weeds as well as environmental and human health concerns. Thus, the present study aimed to evaluate the phytotoxic effects of oil palm frond mulch treated with imazethapyr at a reduced rate on weed emergence and growth. The results of glasshouse experiments have shown that imazethapyr at 12 g a.i. ha-1 in combination with oil palm residues of leaflet (OPL), rachis (OPR) or frond (OPF) at rates of 1.4-1.8 t ha-1 inhibited Eleusine indica emergence and growth by 90-100%, implying that imazethapyr is compatible with oil palm residue mulches. In the field experiment, hand weeding followed by OPF at 3.4 t ha-1 treated with imazethapyr at 24 g a.i. ha-1 have demonstrated excellent control of Mikania micrantha, Asystasia gangetica, Phyllanthus amarus, Panicum sp. and Echinochloa colona by reducing their total dry weight up to 95% at three months after treatment. The present results suggested that the integration of chemical, physical and mechanical methods can provide effective weed control in the coconut plantation for months.
    Matched MeSH terms: Cocos
  19. Cheong JL, Azmi WA
    Data Brief, 2020 Jun;30:105482.
    PMID: 32368576 DOI: 10.1016/j.dib.2020.105482
    Red palm weevil (RPW), Rhynchophorus ferrugineus, is a polyphagous insect that caused economic damage in various palm species, particularly coconut plantation in Malaysia. Therefore, entomopathogenic fungus Metarhizium anisopliae was being introduced in attempts to control biologically the RPW. The entomopathogenicity of an indigenous (Met-Gra4) and foreign (Met-TH) strains of M. anisopliae isolated from the soil of Malaysia and Thailand, were tested against RPW adults in laboratory bioassays at 50, 70, 90% relative humidity (RH). Bioassays indicate no significance differences in efficacy between both the conidia of M. anisopliae strains against RPW adults. Met-Gra4 showed the highest efficacy at 90% RH (LT50 = 6.17 days). However, LT50 only slightly differed from Met-TH (6.33 days; 90% RH). Scanning el ectron microscopy for the treated RPWs showed that Met-Gra4 (90% RH) was densely sporulated within the abdomen, while Met-TH can be found mainly across cuticular surface of RPW.
    Matched MeSH terms: Cocos
  20. Syafiuddin A, Salmiati S, Hadibarata T, Kueh ABH, Salim MR, Zaini MAA
    Sci Rep, 2018 01 17;8(1):986.
    PMID: 29343711 DOI: 10.1038/s41598-018-19375-1
    The current status of silver nanoparticles (AgNPs) in the water environment in Malaysia was examined and reported. For inspection, two rivers and two sewage treatment plants (STPs) were selected. Two activated carbons derived from oil palm (ACfOPS) and coconut (ACfCS) shells were proposed as the adsorbent to remove AgNPs. It was found that the concentrations of AgNPs in the rivers and STPs are in the ranges of 0.13 to 10.16 mg L-1 and 0.13 to 20.02 mg L-1, respectively, with the highest concentration measured in July. ACfOPS and ACfCS removed up to 99.6 and 99.9% of AgNPs, respectively, from the water. The interaction mechanism between AgNPs and the activated carbon surface employed in this work was mainly the electrostatic force interaction via binding Ag+ with O- presented in the activated carbon to form AgO. Fifteen kinetic models were compared statistically to describe the removal of AgNPs. It was found that the experimental adsorption data can be best described using the mixed 1,2-order model. Therefore, this model has the potential to be a candidate for a general model to describe AgNPs adsorption using numerous materials, its validation of which has been confirmed with other material data from previous works.
    Matched MeSH terms: Cocos
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links