Displaying publications 101 - 120 of 872 in total

Abstract:
Sort:
  1. Modelling and optimization of hexavalent chromium removal from aqueous solution by adsorption on low-cost agricultural waste biomass using response surface methodological approach
    Rzig B, Guesmi F, Sillanpää M, Hamrouni B
    Water Sci Technol, 2021 Aug;84(3):552-575.
    PMID: 34388119 DOI: 10.2166/wst.2021.233
    In this study, a response surface methodology (RSM) approach using central composite design (CCD) was investigated to develop a mathematical model and to optimize the effects of pH, adsorbent amount and temperature related to the hexavalent chromium removal by biosorption on peanut shells (PSh). The highest removal percentage of 30.28% was found by the predicted model under the optimum conditions (pH of 2.11, 0.73 g of PSh and 37.2 °C) for a 100 mg/L initial Cr(VI) concentration, which was very near to the experimental value (29.92%). The PSh was characterized by SEM, EDX, FTIR, BET, XRD analyses. Moreover, a Langmuir isotherm fitted well (R2 = 0.992) with the experimental data, and the maximum adsorption capacity was discovered to be 2.48 and 3.49 mg/g respectively at 25 and 45 °C. Kinetic data were well foreseen by pseudo second order. Thermodynamic study depicted that biosorption of Cr(VI) onto PSh was spontaneous and endothermic. Regeneration of the PSh using NaOH showed a loss <5% in the Cr(VI) removal efficiency up to three recycle runs. In summary, the Cr(VI) removal onto economic, sensitive and selective biosorbent (PSh) was optimized using CCD to study biosorption behaviors.
    Matched MeSH terms: Adsorption
  2. Prediction of copper ions adsorption by attapulgite adsorbent using tuned-artificial intelligence model
    Bhagat SK, Pyrgaki K, Salih SQ, Tiyasha T, Beyaztas U, Shahid S, et al.
    Chemosphere, 2021 Aug;276:130162.
    PMID: 34088083 DOI: 10.1016/j.chemosphere.2021.130162
    Copper (Cu) ion in wastewater is considered as one of the crucial hazardous elements to be quantified. This research is established to predict copper ions adsorption (Ad) by Attapulgite clay from aqueous solutions using computer-aided models. Three artificial intelligent (AI) models are developed for this purpose including Grid optimization-based random forest (Grid-RF), artificial neural network (ANN) and support vector machine (SVM). Principal component analysis (PCA) is used to select model inputs from different variables including the initial concentration of Cu (IC), the dosage of Attapulgite clay (Dose), contact time (CT), pH, and addition of NaNO3 (SN). The ANN model is found to predict Ad with minimum root mean square error (RMSE = 0.9283) and maximum coefficient of determination (R2 = 0.9974) when all the variables (i.e., IC, Dose, CT, pH, SN) were considered as input. The prediction accuracy of Grid-RF model is found similar to ANN model when a few numbers of predictors are used. According to prediction accuracy, the models can be arranged as ANN-M5> Grid-RF-M5> Grid-RF-M4> ANN-M4> SVM-M4> SVM-M5. Overall, the applied statistical analysis of the results indicates that ANN and Grid-RF models can be employed as a computer-aided model for monitoring and simulating the adsorption from aqueous solutions by Attapulgite clay.
    Matched MeSH terms: Adsorption
  3. Engineered biochar via microwave CO2 and steam pyrolysis to treat carcinogenic Congo red dye
    Yek PNY, Peng W, Wong CC, Liew RK, Ho YL, Wan Mahari WA, et al.
    J Hazard Mater, 2020 08 05;395:122636.
    PMID: 32298946 DOI: 10.1016/j.jhazmat.2020.122636
    We developed an innovative single-step pyrolysis approach that combines microwave heating and activation by CO2 or steam to transform orange peel waste (OPW) into microwave activated biochar (MAB). This involves carbonization and activation simultaneously under an inert environment. Using CO2 demonstrates dual functions in this approach, acting as purging gas to provide an inert environment for pyrolysis while activating highly porous MAB. This approach demonstrates rapid heating rate (15-120 °C/min), higher temperature (> 800 °C) and shorter process time (15 min) compared to conventional method using furnace (> 1 h). The MAB shows higher mass yield (31-44 wt %), high content of fixed carbon (58.6-61.2 wt %), Brunauer Emmett Teller (BET) surface area (158.5-305.1 m2/g), low ratio of H/C (0.3) and O/C (0.2). Activation with CO2 produces more micropores than using steam that generates more mesopores. Steam-activated MAB records a higher adsorption efficiency (136 mg/g) compared to CO2 activation (91 mg/g), achieving 89-93 % removal of Congo Red dye. The microwave pyrolysis coupled with steam or CO2 activation thereby represents a promising approach to transform fruit-peel waste to microwave-activated biochar that remove hazardous dye.
    Matched MeSH terms: Adsorption
  4. Optimization of fluoride removal by Al doped ZnO nanoparticles using response surface methodology from groundwater
    Pillai P, Dharaskar S, Khalid M
    Chemosphere, 2021 Dec;284:131317.
    PMID: 34216929 DOI: 10.1016/j.chemosphere.2021.131317
    The current novel work presents the optimization of factors affecting defluoridation by Al doped ZnO nanoparticles using response surface methodology (RSM). Al doped ZnO nanoparticles were synthesized by the sol-gel method and validated by FTIR, XRD, TEM/EDS, TGA, BET, and particle size analysis. Moreover, a central composite design (CCD) was developed for the experimental study to know the interaction between Al doped ZnO adsorbent dosage, initial concentration of fluoride, and contact time on fluoride removal efficiency (response) and optimization of the process. Analysis of variance (ANOVA) was achieved to discover the importance of the individual and the effect of variables on the response. The model predicted that the response significantly correlated with the experimental response (R2 = 0.97). Among the factors, the effect of adsorbent dose and contact time was considered to have more influence on the response than the concentration. The optimized process parameters by RSM presented the adsorbent dosage: 0.005 g, initial concentration of fluoride: 1.5 g/L, and contact time: 5 min, respectively. Kinetic, isotherm, and thermodynamic studies were also investigated. The co-existing ions were also studied. These results demonstrated that Al doped ZnO could be a promising adsorbent for effective defluoridation for water.
    Matched MeSH terms: Adsorption
  5. Bio-energy generation in an affordable, single-chamber microbial fuel cell integrated with adsorption hybrid system: effects of temperature and comparison study
    Tee PF, Abdullah MO, Tan IAW, Amin MAM, Nolasco-Hipolito C, Bujang K
    Environ Technol, 2018 Apr;39(8):1081-1088.
    PMID: 28417676 DOI: 10.1080/09593330.2017.1320433
    A microbial fuel cell (MFC) integrated with adsorption system (MFC-AHS) is tested under various operating temperatures with palm oil mill effluent as the substrate. The optimum operating temperature for such system is found to be at ∼35°C with current, power density, internal resistance (Rin), Coulombic efficiency (CE) and maximum chemical oxygen demand (COD) removal of 2.51 ± 0.2 mA, 74 ± 6 mW m-3, 25.4 Ω, 10.65 ± 0.5% and 93.57 ± 1.2%, respectively. Maximum current density increases linearly with temperature at a rate of 0.1772 mA m-2 °C-1, whereas maximum power density was in a polynomial function. The temperature coefficient (Q10) is found to be 1.20 between 15°C and 35°C. Present studies have demonstrated better CE performance when compared to other MFC-AHSs. Generally, MFC-AHS has demonstrated higher COD removals when compared to standalone MFC regardless of operating temperatures.

    ABBREVIATIONS: ACFF: activated carbon fiber felt; APHA: American Public Health Association; CE: Coulombic efficiency; COD: chemical oxygen demand; ECG: electrocardiogram; GAC: granular activated carbon; GFB: graphite fiber brush; MFC: microbial fuel cell; MFC-AHS: microbial fuel cell integrated with adsorption hybrid system; MFC-GG: microbial fuel cell integrated with graphite granules; POME: palm oil mill effluent; PTFE: polytetrafluoroethylene; SEM: scanning electron microscope.

    Matched MeSH terms: Adsorption
  6. Fulltext Adsorption and desorption study of ¹⁴C-chlorpyrifos in two Malaysian agricultural soils
    Halimah Muhamad, Nashriyah Mat, Tan, Yew Ai, Ismail, B.S.
    Journal of Nuclear and Related Technologies, 2004;2004(1):23-33.
    MyJurnal
    The adsorption equilibrium time and effects of pH and concentration of ¹⁴C-labeled chlorpyrifos
    O,O-diethyl O-(3, 5, 6 trichloro-2-pyridyl)-phosphorothiote in soil were investigated. Two types of Malaysian soil under oil palm were used in this study; namely clay loam and clay soil obtained from the Sungai Sedu and Kuala Lumpur International Airport (KLIA) Estates, respectively. Equilibrium studies of chlorpyrifos between the agricultural soil and the pesticide solution were conducted. Adsorption equilibrium time was achieved within 6 and 24 hours for clay loam and clay soil, respectively. It was found that chlorpyrifos adsorbed by the soil samples was characterized by an initial rapid adsorption after which adsorption remained approximately constant. The percentage of ¹⁴C-labeled chlorpyrifos adsorption on soil was found to be higher in clay loam than in clay soils. Results of the study demonstrated that pH affected the adsorption of chlorpyrifos on both clay loam and clay soils. The adsorption of chlorpyrifos on both types of soil was higher at low pH with the adsorption reduced as the pH increased. Results also suggest that chlorpyrifos sorption by soil is concentration dependent.
    Matched MeSH terms: Adsorption
  7. Fulltext Removal of toluene from aqueous solutions using oil palm shell based activated carbon: equilibrium and kinetics study
    Kwong, W. Z., Tan, I. A. W., Rosli, N. A., Lim, L. L. P.
    Pertanika Journal of Science & Technology, 2014;22(2):577-585.
    MyJurnal
    This study is an attempt to investigate the adsorption of petroleum hydrocarbon (toluene) from aqueous solutions using granular activated carbon (GAC) synthesized from oil palm shell (OPS) (referred as OPSbased GAC). This study involved a series of batch experiments to determine the adsorption equilibrium and kinetics. The batch experiments were conducted by shaking 200 mL toluene solution containing 0.4 g GAC (initial concentrations of 5, 15, 25 and 30 mg/L) at 180 rpm at 30°C. The OPS-based GAC achieved more than 80% toluene removal in all the experiments. The adsorption capacity of the OPSbased GAC estimated using Freundlich isotherm was 6.039 mg/g (L/mg)1/n. The adsorption kinetic study showed that the adsorption of toluene was of chemisorption as the experimental data fitted better to the pseudo-second-order kinetic model than the pseudo-first-order kinetic model.
    Matched MeSH terms: Adsorption
  8. Fulltext Adsorption of phenol using activated carbon adsorbent from waste tyres
    Nurulhuda Amri, Ridzuan Zakaria, Mohamad Zailani Abu Bakar
    Pertanika Journal of Science & Technology, 2009;17(2):-.
    MyJurnal
    The adsorption of phenol, from aqueous solutions on activated carbon from waste tyres, was studied in a batch system at different initial concentrations (100-500mg/L) at 30°C for 48 hours. The activated carbon was prepared using the two-step physiochemical activation, with potassium hydroxide (KOH) at ratio KOH/char = 5. The carbonization process was done at 800°C for 1 hour with nitrogen flow rate 150ml/min, followed by the activation with the carbon dioxide flow rate 150ml/min at 800°C for 2 hours. The adsorption isotherms were determined by shaking 0.1g of activated carbon with 100ml phenol solutions. The initial and final concentrations of phenol in aqueous solution were analyzed using the UV-Visible Spectrophotometer (Shimadzu, UV-1601) at a wavelength of 270nm. Experimental isotherm data were analyzed using the Langmuir and Freundlich isotherm models.The equilibrium data for phenol adsorption could fit both isotherm models well with the R2 value of 0.9774 and 0.9895, respectively. The maximum adsorption capacity of the adsorbent obtained from the Langmuir model was up to 156.25 mg/g
    Matched MeSH terms: Adsorption
  9. Fulltext The adsorption coefficient (Koc) of chlorpyrifos in clay soil
    Halimah Muhamad, Tan, Yew Ai, Nashriyah Mat, Ismail Sahid
    Journal of Nuclear and Related Technologies, 2005;2005(2):23-30.
    MyJurnal
    The purpose of this study was to determine the adsorption coefficient (Koc) of chlorpyrifos in clay soil by measuring the Freundlich adsorption coefficient (Kads(f)) and desorption coefficient (1/n value) of chlorpyrifos. It was found that the Freundlich adsorption coefficient (Kads(f)) and the linear regression (r 2 ) of the Freundlich adsorption isotherm for chlorpyrifos in the clay soil were 52.6 L/kg and 0.5344, respectively. Adsoprtion equilibrium time was achieved within 24 hours for clay soil. This adsoprtion equilibrium time was used to determine the effect of concentration on adsorption. The adsorption coefficient (Koc) of clay soil was found to be 2783 L/kg with an initial concentration solution of 1 µg/g, soil-solution ratio (1:5) at 30 o C when the equilibrium between the soil matrix and solution was 24 hours. The Kdes decreased over four repetitions of the desorption process. The chlorpyrifos residues may be strongly adsorbed onto the surface of clay.
    Matched MeSH terms: Adsorption
  10. Fulltext Sorption of so2 and no by modified palm shell activated carbon: breakthrough curve model
    S. Bhatia, K. T. Lee, A. R. Mohamed, Sumathi, S.
    Pertanika Journal of Science & Technology, 2014;22(1):307-314.
    MyJurnal
    Simultaneous removal of SO2 and NO from simulated flue gas by cerium oxide supported over palm shell activated carbon (Ce/PSAC) was studied in a fixed bed adsorber. In this study, the adsorption breakthrough of SO2 and NO on Ce/PSAC at different reaction temperatures was manipulated to test their applicability to a model developed by Yoon and Nelson (1984) for breakthrough curves. Yoon and Nelson (1984) developed a relatively simple model addressing the adsorption and breakthrough of adsorbate vapour with respect to activated charcoal. This model was based on the assumption that the rate of decrease in the probability of adsorption for each adsorbate molecule is proportional to the probability of adsorbate adsorption and the probability of adsorbate breakthrough on the adsorbent. A regression analysis (least square method) has been used to give the model parameters of k and t1/2. The results showed that the agreement between the model and the experimental results is satisfactory. From the observation, it is concluded that the simple two-parameter model of Yoon and Nelson’s model can be applied for modelling the breakthrough curves of SO2 and NO gas adsorption over Ce/PSAC.
    Matched MeSH terms: Adsorption
  11. A review of the applications of organo-functionalized magnetic graphene oxide nanocomposites for heavy metal adsorption
    Sherlala AIA, Raman AAA, Bello MM, Asghar A
    Chemosphere, 2018 Feb;193:1004-1017.
    PMID: 29874727 DOI: 10.1016/j.chemosphere.2017.11.093
    Graphene-based adsorbents have attracted wide interests as effective adsorbents for heavy metals removal from the environment. Due to their excellent electrical, mechanical, optical and transport properties, graphene and its derivatives such as graphene oxide (GO) have found various applications. However, in many applications, surface modification is necessary as pristine graphene/GO may be ineffective in some specific applications such as adsorption of heavy metal ions. Consequently, the modification of graphene/GO using various metals and non-metals is an ongoing research effort in the carbon-material realm. The use of organic materials represents an economical and environmentally friendly approach in modifying GO for environmental applications such as heavy metal adsorption. This review discusses the applications of organo-functionalized GO composites for the adsorption of heavy metals. The aspects reviewed include the commonly used organic materials for modifying GO, the performance of the modified composites in heavy metals adsorption, effects of operational parameters, adsorption mechanisms and kinetic, as well as the stability of the adsorbents. Despite the significant research efforts on GO modification, many aspects such as the interaction between the functional groups and the heavy metal ions, and the quantitative effect of the functional groups are yet to be fully understood. The review, therefore, offers some perspectives on the future research needs.
    Matched MeSH terms: Adsorption
  12. Fulltext High intrinsic biosorption efficiency of Cattle Manure on Cr(VI): a potential low-cost fibre-rich biosorbent
    Yap, K.L., Lee, C.M., Tang, T.K., Lee, Y.Y., Gan, Y.L., Lai, O.M., et al.
    Pertanika Journal of Science & Technology, 2018;26(1):193-214.
    MyJurnal
    Fibre-rich manure derived from grass-fed cattle showed significantly higher intrinsic sorption efficiency on Cr(VI) solution as compared to corncob, sawdust and cogon grass. This observation could be attributed to the ligneous nature and rough surface morphology of the cattle manure. Four-factor, three-level, face-centred composite design (FCCD) suggested the process was greatly affected by initial pH of the solution, contact time and sorbent dosage (p50% adsorption efficiency. It is predicted that both physisorption and chemisorption are involved in the sorption process.
    Matched MeSH terms: Adsorption
  13. Hydride-induced ligand dynamic and structural transformation of gold nanoclusters during a catalytic reaction
    Nasaruddin RR, Yao Q, Chen T, Hülsey MJ, Yan N, Xie J
    Nanoscale, 2018 Dec 04.
    PMID: 30512030 DOI: 10.1039/c8nr07197g
    Quasi-homogeneous ligand-protected gold nanoclusters (Au NCs) with atomic precision and well-defined structure offer great opportunity for exploring the catalytic nature of nanogold catalysts at a molecular level. Herein, using real-time electrospray ionization mass spectrometry (ESI-MS), we have successfully identified the desorption and re-adsorption of p-mercaptobenzoic acid (p-MBA) ligands from Au25(p-MBA)18 NC catalysts during the hydrogenation of 4-nitrophenol in solution. This ligand dynamic (desorption and re-adsorption) would initiate structural transformation of Au25(p-MBA)18 NC catalysts during the reaction, forming a mixture of smaller Au NCs (Au23(p-MBA)16 as the major species) at the beginning of catalytic reaction, which could further be transformed into larger Au NCs (Au26(p-MBA)19 as the major species). The adsorption of hydrides (from NaBH4) is identified as the determining factor that could induce the ligand dynamic and structural transformation of NC catalysts. This study provides fundamental insights into the catalytic nature of Au NCs, including catalytic mechanism, active species and stability of Au NC catalysts during a catalytic reaction.
    Matched MeSH terms: Adsorption
  14. Effect of monoethanolamine loading on the physicochemical properties of amine-functionalized Si-MCM-41
    Anita Ramli, Sohail Ahmed, Suzana Yusup
    Sains Malaysiana, 2014;43:253-259.
    Siliceous mesoporous molecular sieve (Si-MCM-41) material with highly ordered hexagonal pore arrangement was synthesized at 373 K for 8-days duration by hydrothermal method, dried at 393 K and calcined at 823 K in N2 atmosphere. The calcined Si-MCM-41 was later functionalized with 10-50 wt. % monoethanolamine (MEA) by impregnation method and dried in vacuum at 343 K. The MEA-Si-MCM-41 samples were characterized for their physicochemical properties with FTIR, XRD, TGA, HRTEM, FESEM, BET and elemental analysis. XRD results showed that the intensity of the characteristic peaks of Si-MCM-41 reduces with increasing loading of MEA indicating that the MEA molecules are loaded in the pores as well as on the surface of Si-MCM-41. The appearance of FTIR peaks corresponding to N-H, C-N and C-H bonds suggested that Si-MCM-41 has been functionalized with MEA. The presence of Si-O-Si peaks in FTIR spectra of MEA-Si-MCM-41 samples indicates that the hexagonal pore arrangement remains intact and this is supported by HRTEM images. FESEM images show that MEA-Si-MCM-41 samples became agglomerated with increase loading of MEA. TGA analyses show that the MEA-Si-MCM-41 samples are thermally stable up to 528 K. N2 adsorption-desorption isotherms show that the textural properties of Si-MCM-41 material slowly change from a mesoporous material to non-porous material as the MEA loading increases due to pore filling effect during functionalization with MEA. Detection of N, C and H by elemental analysis confirms the presence of MEA in MEA-Si-MCM-41 samples.
    Matched MeSH terms: Adsorption
  15. Adsorbed CO at polycrystalline copper in phosphate buffered solution
    Jumat Salimon
    Sains Malaysiana, 2007;36:27-32.
    The adsorption of CO at polycrystalline copper surface was investigated spectroscopically. It was found that CO adsorbed as a linear adsorbed CO, Cu-COL and was a dominant species on copper surface at low CO concentration. A Cu-COL was electrochemically converted to a bridge bonded CO, Cu-COB at a high CO concentration condition. Increasing the CO surface coverage, qCO will increase the formation of adsorbed bridge bonded CO. A nitrogen gas purging treatment was used to examine the stability of an adsorbed CO through the evacuation process. The result showed that Cu-COB remained intact while Cu-COL was completely removed from the copper surface. It suggests that Cu-COL may involve in a weak bonding to a copper surface such as in a physisorbed interaction, while Cu-COB consists much stronger bonding such as a chemisorbed interaction. The N2 purging treatment also gave an additional prove that Cu-COB was partly converted to Cu(I)-CO at anodic potential regions.
    Matched MeSH terms: Adsorption
  16. Influence of PANI Additions on methanol sensing properties of ZnO thin films
    Mohammad Hafizuddin Jumali, Norhashimah Ramli, Izura Izzuddin, Muhammad Yahaya, Muhamad Mat Salleh
    Sains Malaysiana, 2011;40.
    The influence of PANI additions on methanol sensing properties of ZnO thin films at room temperature had been investigated. Commercial polyaniline powder (PANI) was mixed into 3 mL ZnO solution in five different weight percentages namely 1.25, 2.50, 3.75, 5.00 and 6.25% to obtain ZnO/PANI composite solutions. These solutions were spin coated onto glass substrate to form thin films. Microstructural studies by FESEM indicated that ZnO/PANI films showed porous structures with nanosize grains. The thickness of the film increased from 55 to 256 nm, proportionate to increment of PANI. The presence of 2 adsorption peaks at ~310 nm and ~610 nm in UV-Vis spectrum proved that addition of PANI has modified the adsorption peak of ZnO film. Methanol vapour detection showed that addition of PANI into ZnO dramatically improved the sensing properties of the sensor. The sensors also exhibited good repeatability and reversibility. Sensor with the amount of PANI of 3.75 wt% exhibited the highest sensitivity with response and recovery time was about 10 and 80 s, respectively. The possible sensing mechanism of the sensor was also discussed in this article.
    Matched MeSH terms: Adsorption
  17. Boron removal from aqueous solution using curcumin-impregnated activated carbon
    Azhar Abdul Halim, Nor Alia Roslan, Nor Shamsiah Yaacub, Mohd. Talib Latif
    Sains Malaysiana, 2013;42:1293-1300.
    This study was conducted to investigate the batch and fixed-bed adsorption properties of boron on curcumin-impregnated activated carbon (Cur-AC). The maximum boron removal was obtained at pH5.5 and 120 min of contact time. Langmuir and Freundlich isotherm models were applied and it was determined that the experimental data conformed to both models. The Langmuir maximum adsorption capacities for Cur-AC (5.00 mg/g) and regenerated Cur-AC (3.61 mg/g) were obviously higher than the capacity for bare activated carbon (0.59 mg/g). Kinetic studies indicated the adsorption of boron conformed to the intra-particle model. The highest boron removal in fixed-bed column adsorption was achieved up to 99% for the first 5 min at an inlet concentration of 890 mg/L and a flow rate of 8.0 mL/min. Thomas and the Yoon-Nelson models gave better fit to the experimental data. Cur-AC can be reused after elution processes with slightly lower adsorption capacity.
    Matched MeSH terms: Adsorption
  18. Fulltext Water transport properties of boron nitride nanosheets mixed matrix membranes for humic acid removal
    Tang CY, Zulhairun AK, Wong TW, Alireza S, Marzuki MSA, Ismail AF
    Heliyon, 2019 Jan;5(1):e01142.
    PMID: 30723824 DOI: 10.1016/j.heliyon.2019.e01142
    Ultrafiltration grade polysulfone-based mixed matrix membranes (MMMs) incorporated with two-dimensional boron nitride nanosheet (BNNS) was prepared via phase inversion method. The amount of BN incorporated was varied and the influence on membrane morphology, contact angle, surface charge, as well as water permeability and humic acid rejection were investigated. Results revealed that the addition of BN to the membrane matrix resulted in profound increase in water permeability (almost tripled to that of neat PSf) and humic acid rejection due to the increase in pore size and surface negative charge. Beyond the morphological changes imparted by the inclusion of BNNS, we postulated that the presence of BNNS within the membrane matrix also contribute to the enhancement in flux and rejection based on surface-slip and selective interlayer transport. Despite the favourable augmentation of water transport and filtration performance, the MMMs suffered with fouling problem due to the entrapment of foulant within the enlarged pores and the membrane valleys. Its inherent adsorptive character could be a disadvantage when utilized as membrane filler.
    Matched MeSH terms: Adsorption
  19. A review on production of metal organic frameworks (MOF) for CO2 adsorption
    Ghanbari T, Abnisa F, Wan Daud WMA
    Sci Total Environ, 2020 Mar 10;707:135090.
    PMID: 31863992 DOI: 10.1016/j.scitotenv.2019.135090
    The environment sustenance and preservation of global climate are known as the crucial issues of the world today. Currently, the crisis of global warming due to CO2 emission has turned into a paramount concern. To address such a concern, diverse CO2 capture and sequestration techniques (CCS) have been introduced so far. In line with this, Metal Organic Frameworks (MOFs) have been considered as the newest and most promising material for CO2 adsorption and separation. Due to their outstanding properties, this new class of porous materials a have exhibited a conspicuous potential for gas separation technologies especially for CO2 storage and separation. Thus, the present review paper is aimed to discuss the adsorption properties of CO2 on the MOFs based on the adsorption mechanisms and the design of the MOF structures. In addition, the main challenge associated with using this prominent porous material has been mentioned.
    Matched MeSH terms: Adsorption
  20. Fulltext Adsorption and Kinetics Studies of Cr (VI) by Graphene Oxide and Reduced Graphene Oxide-Zinc Oxide Nanocomposite
    Naseem T, Bibi F, Arif S, Waseem M, Haq S, Azra MN, et al.
    Molecules, 2022 Oct 22;27(21).
    PMID: 36363976 DOI: 10.3390/molecules27217152
    In this work, graphene oxide (GO) and its reduced graphene oxide-zinc oxide nanocomposite (rGO-ZnO) was used for the removal of Cr (VI) from aqueous medium. By employing a variety of characterization techniques, morphological and structural properties of the adsorbents were determined. The adsorption study was done by varying concentration, temperature, pH, time, and amount of adsorbent. The results obtained confirmed that rGO-ZnO is a more economical and promising adsorbent for removing Cr (VI) as compared to GO. Kinetic study was also performed, which suggested that sorption of Cr (VI) follows the pseudo-first-order model. For equilibrium study, non-linear Langmuir was found a better fitted model than its linearized form. The maximum adsorption capacity calculated for GO and rGO-ZnO nanocomposite were 19.49 mg/g and 25.45 mg/g, respectively. Endothermic and spontaneous nature of adsorption was detected with positive values of ΔS (change in entropy), which reflects the structural changes happening at the liquid/solid interface.
    Matched MeSH terms: Adsorption
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links