MyMedR

Displaying publications 121 - 140 of 237 in total

Abstract:

Sort:

Fulltext Quantitative analysis of uranium and thorium in local zircon and tin slag by the EDXRF technique

Meor Yusoff, M.S., Masliana Muslimin

Journal of Nuclear and Related Technologies, 2010;2010(1):21-28.
MyJurnal

Considerable amount of uranium and thorium are found in our local zircon and the level is much higher than the maximum value adopted by Malaysia and many importing countries. Energy Dispersive X-ray Flourescence (EDXRF) proves to be a very valuable tool in the determination of these radioactive elements as it can perform the analysis simultaneously in shorter time. Quantitative analysis of this mineral involves the use of a fundamental parameter technique developed by National Bureau of Standard, USA and Geological Survey Canada (NBS-GSC FPT). The analysis for tin slag is more challenging as there is no reference standard of similar material. Thus the standard addition method was applied to correct the error from the matrix of the sample.

Matched MeSH terms: Minerals
Retained Endoscope: An Unexpected but Serious Complication of Hemospray®

Yii RSL, Chuah KH, Poh KS, Lau PC, Ng KL, Ho SH, et al.

Dig Dis Sci, 2022 01;67(1):344-347.
PMID: 33491164 DOI: 10.1007/s10620-021-06835-4
Matched MeSH terms: Minerals/administration & dosage
Nonpharmacological interventions for osteoporosis treatment: Systematic review of clinical practice guidelines

Coronado-Zarco R, Olascoaga-Gómez de León A, García-Lara A, Quinzaños-Fresnedo J, Nava-Bringas TI, Macías-Hernández SI

Osteoporos Sarcopenia, 2019 Sep;5(3):69-77.
PMID: 31728423 DOI: 10.1016/j.afos.2019.09.005

Objectives: The aim of this study was to perform a systematic review of clinical practice guidelines to identify nonpharmacologic recommendations for osteoporosis treatment.
Methods: A systematic review of literature following PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses)-statement methodology for clinical practice guidelines was conducted; PROSPERO CRD42019138548. Assessment of selected clinical practice guidelines with the AGREE (Appraisal of Guidelines for Research & Evaluation)-II methodological quality instrument was performed, and those graded over 60 points were selected for recommendations extraction and evidence analysis.
Results: Only 6 clinical practice guidelines fulfilled criteria, 69 nonpharmacological recommendations were extracted: 13 from American Association of Clinical Endocrinologists and American College of Endocrinology guideline, 16 from Malaysian Osteoporosis Society guideline, 15 from the Ministry of Health in Mexico guideline, 14 from Royal Australian College of General Practitioners guideline, 7 from Sociedad Española de Investigación Ósea y del Metabolismo Mineral guideline, and 7 from National Osteoporosis Guideline Group guideline. Percentage by theme showed that the highest number of recommendations were 12 (17.1%) for vitamin D, 11 (15.7%) for a combination of calcium and vitamin D, and 11 (15.7%) for exercise.
Conclusions: These recommendations address integrating interventions to modify lifestyle, mainly calcium and vitamin D intake, and exercise. Other recommendations include maintaining adequate protein intake, identification and treatment of risk factors for falls, and limiting the consumption of coffee, alcohol and tobacco. Considerations on prescription must be taken.

Matched MeSH terms: Minerals
Fulltext Sodium content in sauces-a major contributor of sodium intake in Malaysia: a cross-sectional survey

Shahar S, You YX, Zainuddin NS, Michael V, Ambak R, Haron H, et al.

BMJ Open, 2019 05 27;9(5):e025068.
PMID: 31133578 DOI: 10.1136/bmjopen-2018-025068

OBJECTIVE: To investigate the sodium content in sauces sold in Malaysian supermarkets.
METHODS: A cross-sectional market survey was conducted in 2017 of 233 sauces sold in Malaysian supermarkets. Information on the sodium content was collected from the product packaging and nutrient information panels of the sauces sold in the seven top supermarkets in the capital of Malaysia.
RESULTS: Of the 233 sauces surveyed, 116 did not include sodium content information on the nutrient information panel (49.8%). Soy sauce (particularly sweet soy sauce) and ketchup (particularly chilli sauce) were found to be the highest number of products surveyed in the analysis (N=54 and N=48, respectively). The highest sodium content information was displayed by fish/prawn sauce (budu/cencalok) (5192±3228 mg/100 g) which was followed by the light/thin soy sauce (5116±2084 mg/100 g), and followed by salty soy sauce (4780±988 mg/100 g). The sodium content information of the imported sauces was higher compared with local products produced in Malaysia. However, for sweet soy sauce, the sodium content information of the local products was higher compared with the imported products. Of the 116 sauces which displayed information regarding their sodium content, only 18.2% of the salty soy sauce and 25% of the light/thin soy sauce were found to be below the 2017 Malaysian sodium guidelines. Furthermore, only 21.7% of chilli ketchup and no tomato ketchup were below the 2017 UK salt guidelines.
CONCLUSIONS: Almost half of the sauces surveyed did not include sodium content information on the nutrient information panel. It is recommended that sodium content information is provided on all sauces sold in Malaysia. Also, manufacturers should be urged to reduce the sodium content level of their sauces to a minimum of 5%.

Matched MeSH terms: Minerals
Fulltext Investigation of struvite crystals formed in palm oil mill effluent anaerobic digester

Ngatiman M, Jami MS, Abu Bakar MR, Subramaniam V, Loh SK

Heliyon, 2021 Jan;7(1):e05931.
PMID: 33490684 DOI: 10.1016/j.heliyon.2021.e05931

The formation of struvite crystals or magnesium ammonium phosphate (MgNH4PO4) in palm oil mill effluent (POME) occurs as early as in the secondary stage of POME treatment system. Its growth continues in the subsequent tertiary treatment which reduces piping diameter, thus affecting POME treatment efficiency. Hypothesis. The beneficial use of the crystal is the motivation. This occurrence is rarely reported in scientific articles despite being a common problem faced by palm oil millers. The aim of this study is to characterize struvite crystals found in an anaerobic digester of a POME treatment facility in terms of their physical and chemical aspects. The compositions, morphology and properties of these crystals were determined via energy dispersive spectroscopy (EDS), elemental analysis, scanning electron microscopy (SEM) and x-ray diffraction (XRD). Solubility tests were carried out to establish solubility curve for struvite from POME. Finally, crystal growth experiment was done applying reaction crystallization method to demonstrate struvite precipitation from POME. Results showed that high phosphorous (P) (24.85 wt%) and magnesium (Mg) (21.33 wt%) content was found in the struvite sample. Elemental analysis detected carbon (C), hydrogen (H), nitrogen (N) and sulfur (S) below 4 wt%. The crystals analysed by XRD in this study were confirmed as struvite with 94.8% struvite mineral detected from its total volume. Having an orthorhombic crystal system, struvite crystals from POME recorded an average density of 1.701 g cm-3. Solubility curve of struvite from POME was established with maximum solubility of 275.6 mg L-1 at pH 3 and temperature 40 °C. Minimum solubility of 123.6 mg L-1 was recorded at pH 7 and temperature 25 °C. Crystal growth experiment utilizing POME as the source medium managed to achieve 67% reduction in phosphorous content. This study concluded that there is a potential of harnessing valuable nutrients from POME in the form of struvite. Struvite precipitation technology can be adapted in the management of POME in order to achieve maximum utilization of the nutrients that are still abundant in POME. At the same time maximization of nutrient extractions from POME will also reduce pollutants loading in the final discharge.

Matched MeSH terms: Minerals
In vitro apatite mineralization and heat generation of magnetite-reduced graphene oxide nanocomposites for hyperthermia treatment

Miyazaki T, Akaike J, Kawashita M, Lim HN

Mater Sci Eng C Mater Biol Appl, 2019 Jun;99:68-72.
PMID: 30889741 DOI: 10.1016/j.msec.2019.01.091

Nanocomposites of magnetite (Fe3O4) and reduced graphene oxide (rGO) generate heat under an alternating magnetic field and therefore have potential applications as thermoseeds for cancer hyperthermia treatment. However, the properties of such nanocomposites as biomaterials have not been sufficiently well characterized. In this study, the osteoconductivity of Fe3O4-rGO nanocomposites of various compositions was evaluated in vitro in terms of their apatite-forming ability in simulated body fluid (SBF). Furthermore, the heat generation of the nanocomposites was measured under an alternating magnetic field. The apatite-forming ability in SBF improved as the Fe3O4 content in the nanocomposite was increased. As the Fe3O4 content was increased, the nanocomposite not only rapidly raised the surrounding temperature to approximately 100 °C, but the specific absorption rate also increased. We assumed that the ionic interaction between the Fe3O4 and rGO was enhanced and that Brown relaxation was suppressed as the proportion of rGO in the nanocomposite was increased. Consequently, a high content of Fe3O4 in the nanocomposite was effective for improving both the osteoconductivity and heat generation characteristics for hyperthermia applications.

Matched MeSH terms: Minerals/chemistry*
Effects of EDTA on adsorption of Cd(II) and Pb(II) by soil minerals in low-permeability layers: batch experiments and microscopic characterization

You X, Liu S, Dai C, Zhong G, Duan Y, Guo Y, et al.

Environ Sci Pollut Res Int, 2020 Nov;27(33):41623-41638.
PMID: 32691313 DOI: 10.1007/s11356-020-10149-9

Ethylenediaminetetraacetic acid (EDTA) can serve as a washing agent in the remediation of low-permeability layers contaminated by heavy metals (HMs). Therefore, batch adsorption experiments, where pure quartz (SM1) and mineral mixtures (SM2) were used as typical soil minerals (SMs) in low-permeability layers, were implemented to explore the effects of different EDTA concentrations, pH, and exogenous chemicals on the HM-SM-EDTA adsorption system. As the EDTA concentration increased, it gradually cut down the maximum Cd adsorption capacities of SM1 and SM2 from approximately 135 to 55 mg/kg and 2660 to 1453 mg/kg; and the maximum Pb adsorption capacities of SM1 and SM2 were reduced from 660 to 306 mg/kg and 19,677 to 19,262 mg/kg, respectively. When the initial mole ratio (MR = moles of HM ions/sum of moles of HM ions and EDTA) was closer to 0.5, the effect of EDTA was more effective. Additionally, EDTA worked well at pH below 7.0 and 4.0 for Cd and Pb, respectively. Low-molecular-weight organic acids (LMWOAs) affected the system mainly by bridging, complexation, adsorption site competition, and reductive dissolution. Cu2+, Fe2+ ions could significantly increase the Cd and Pb adsorption onto SM2. Notably, there were characteristic changes in mineral particles, including attachment of EDTA and microparticles, agglomeration, connection, and smoother surfaces, making the specific surface area (SSA) decrease from 16.73 to 12.59 m2/g. All findings indicated that EDTA could effectively and economically reduce the HM adsorption capacity of SMs at the reasonable MR value, contact time, and pH; EDTA reduced the HM adsorption capacity of SMs not only by complexation with HM ions but also by decreasing SSA and blocking active sites. Hence, the acquired insight from the presented study can help to promote the remediation of contaminated low-permeability layers in groundwater.

Matched MeSH terms: Minerals
Fulltext The Safety Of Capsules Containing Lactic Acid Bacilli

Paraidathathu, Thomas, Lee, S.H.

Ann Dent, 1999;6(1):-.
MyJurnal

The population in Malaysia use various types of health and food supplements. These products are considered safe and are used without any concern for their toxicity. Among the products used as health supplements are products that contain lactic acid bacteria. This project studied the acute and subacute toxicity of a product containing minerals, herbs, vitamins and live lactic acid bacteria, on Sprague- Dawley rats. Acute toxicity was tested 24 hours after a single dose and subacute toxicity was studied 24 hours after 7 days of daily dosing. The parameters that were studied were alanine aminotransferase (AL T,SGPT), aspartate aminotransferase (AST, SGOT), serum urea, ratios of weight of kidney and liver weight to body weight and percentage changes in body weights. The contents of capsules of the product (6, 8 or lO capsules for acute studies and 6, 10 and 12 for subacute studies) were mixed with corn oil and fed orally to rats. Control rats were fed with corn oil alone. In the acute studies, the level of ALT in the rats treated with the contents of the capsule was lower than controls. There were no significant changes in the other parameters of the rats in the treatment groups as compared to controls. There were no significant differences in all the parameters between rats in the treatment groups as compared to controls in the subacute studies. Sprague-Dawley rats fed with high doses of the product did not show signs of toxicity in the parameters that were studied.

Matched MeSH terms: Minerals
Fulltext Radiological hazard associated with amang processing industry in Peninsular Malaysia and its environmental impacts

Sanusi MSM, Ramli AT, Hashim S, Lee MH

Ecotoxicol Environ Saf, 2021 Jan 15;208:111727.
PMID: 33396058 DOI: 10.1016/j.ecoenv.2020.111727

Continuous depletion in tin productions has led to a newly emerging industry that is a tin by-product (amang) processing industry to harness mega tons of tin by-products produced in the past. Amang composed of profitable multi-heavy minerals and rare-earth elements. With poorly established safety and health practices in operating plant, amang poses extremely high radioactivity problem associated with high occupational ionizing radiation exposures to workers and continuously impacting the local environment with radioactive contamination from industrial effluent and solid waste into lithosphere and water bodies. The radioactivity level of 238U and 232Th series in the mineral varies from few hundreds up to ~200,000 and ~400,000 Bq kg-1 respectively and are potential to yield more than ~ 30,000 nGy h-1 of gamma (γ) radiation exposure to plant workers. The study found out that for 8 h of work time, a worker is estimated to receive an average effective dose of 0.1 mSv per day from external γ radiation source with a maximum up to 2 mSv per day for extreme exposure situation. Interferences of different exposure routes for examples inhalation of equivalent equilibrium concentration (ECC) of 222Rn and 220Rn progenies and airborne long-lived α particles from the dusty working environment could pose a higher total effective dose as much as 5 mSv per day and 115 mSv per year. The value is 5 times higher than the annual dose limit for designated radiation worker (20 mSv) in Peninsular Malaysia. The study found that 41% of the total received an effective dose received by a worker is contributed by 222Rn, 32% of airborne particulates and dust, 23% from external γ exposure and 4% from 220Rn. Based on radioecological risk assessment, the study found out that the aquatic environment is the highly exposed group to ionizing radiation from industrial effluent discharge and sand residues. With the impotent establishment of radiation protection in the industry, plus the country newly introduced long-term plan to revive tin mining as well as its accessory amang mineral, it is necessary for the government to harmonize current regulation to improve the worker safety and health as well as sustaining local environment.

Matched MeSH terms: Minerals
Plant proteins, minerals and trace elements of Eurycoma longifolia (Tongkat Ali)

Chua LS, Abdul-Rahman N, Rosidi B, Lee CT

Nat Prod Res, 2013 Mar;27(4-5):314-8.
PMID: 22468741 DOI: 10.1080/14786419.2012.676552

A water extraction method has been used to extract plant proteins from the roots of Eurycoma longifolia harvested from Perak and Pahang, Malaysia. On the basis of the spectroscopic Bradford assay, Tongkat Ali Perak and Pahang contained 0.3868 and 0.9573 mg mL(-1) of crude protein, respectively. The crude proteins were separated by one dimensional 15% sodium dodecyl sulphate polyacrylamide gel electrophoresis into two (49.8 and 5.5 kD) and four (49.8, 24.7, 21.1 and 5.5 kD) protein spots for Tongkat Ali Perak and Pahang, respectively. Isoleucine was present in the highest concentration significantly. Both plant samples showed differences in the mineral and trace element profiles, but the minerals calcium, magnesium and potassium were present in the highest concentration. The highly concerned toxic metals such as arsenic and lead were not detected.

Matched MeSH terms: Minerals/analysis*
Fulltext Selective leaching of fe from radioactive malaysian zircon mineral

Meor Yusoff, M.S., Latifah Amin

Journal of Nuclear and Related Technologies, 2009;2009(2):70-77.
MyJurnal

XRF analysis was done on a local zircon samples and the result shows it has a high Fe, Th and U content. The high Fe content in Malaysian zircon had made the mineral to be classified as of a low-grade zircon. Presence of Fe in this mineral may be resulted from clay mineral coating found on the zircon surface. Chemical leaching technique was used for the removal of this Fe and the study also shows that a 600 o C heat pretreatment stage is important for the effectiveness of this process. Other parameters studied are the HCl concentration, leaching temperature and time. By using the optimum leaching parameters, the Fe content had been reduced to 0.049% and thus qualified it to be categorised as a premium grade zircon.

Matched MeSH terms: Minerals
Fulltext Geochemical and organic petrographic characteristics of high bituminous shales from Gurha mine in Rajasthan, NW India

Singh AK, Hakimi MH, Kumar A, Ahmed A, Abidin NSZ, Kinawy M, et al.

Sci Rep, 2020 12 17;10(1):22108.
PMID: 33335176 DOI: 10.1038/s41598-020-78906-x

A high bituminous shale horizon from the Gurha mine in the Bikaner sub-basin of the Rajasthan District, NW India, was studied using a collection of geochemical and petrological techniques. This study investigated the nature and environmental conditions of the organic matter and its relation to the unconventional oil-shale resources of the bituminous shale. The analyzed shales have high total organic carbon and total sulfur contents, suggesting that these shale sediments were deposited in a paralic environment under reducing conditions. The dominant presence of organic matter derived from phytoplankton algae suggests warm climatic marine environment, with little connection to freshwater enhancing the growth of algae and other microorganisms. The analyzed bituminous shales have high aquatic-derived alginite organic matters, with low Pr/Ph, Pr/n-C17, and Ph/n-C18 ratios. It is classified as Type II oil-prone kerogen, consistent with high hydrogen index value. Considering the maturity indicators of geochemical Tmax (

Matched MeSH terms: Minerals
Potential Residual Contaminants in Edible Bird's Nest

Yeo BH, Tang TK, Wong SF, Tan CP, Wang Y, Cheong LZ, et al.

Front Pharmacol, 2021;12:631136.
PMID: 33833681 DOI: 10.3389/fphar.2021.631136

Edible bird's nest (EBN) is recognized as a nourishing food among Chinese people. The efficacy of EBN was stated in the records of traditional Chinese medicine and its activities have been reported in many researches. Malaysia is the second largest exporter of EBNs in the world, after Indonesia. For many years, EBN trade to China was not regulated until August 2011, when a safety alert was triggered for the consumption of EBNs. China banned the import of EBNs from Malaysia and Indonesia due to high level of nitrite. Since then, the Malaysia government has formulated Malaysia Standards for swiftlet farming (MS 2273:2012), edible bird's nest processing plant design and management (MS 2333:2010), and edible bird's nest product quality (MS 2334:2011) to enable the industry to meet the specified standards for the export to China. On the other hand, Indonesia's EBN industry formulated a standard operating procedure (SOP) for exportation to China. Both countries can export EBNs to China by complying with the standards and SOPs. EBN contaminants may include but not limited to nitrite, heavy metals, excessive minerals, fungi, bacteria, and mites. The possible source of contaminants may come from the swiftlet farms and the swiftlets or introduced during processing, storage, and transportation of EBNs, or adulterants. Swiftlet house design and management, and EBN processing affect the bird's nest color. Degradation of its optical quality has an impact on the selling price, and color changes are tied together with nitrite level. In this review, the current and future prospects of EBNs in Malaysia and Indonesia in terms of their quality, and the research on the contaminants and their effects on EBN color changes are discussed.

Matched MeSH terms: Minerals
Fulltext The effect of fluorosis on human teeth under light microscopy: A cross-sectional study

Ramesh M, Narasimhan M, Krishnan R, Aruna RM, Kuruvilla S

J Oral Maxillofac Pathol, 2017 Sep-Dec;21(3):345-350.
PMID: 29391706 DOI: 10.4103/jomfp.JOMFP_247_16

Background: Fluoride is needed for the normal development of bone and teeth; in high levels, it affects developing teeth and bone. Dental fluorosis (DF) is caused by ingestion of excess fluoride mainly through drinking water.

Aim: The present study aims to observe and understand the histological changes of fluorosed teeth under light microscope (LM).

Materials and Methods: Teeth which were indicated for extractions for orthodontic or periodontal problems were selected. Thirty extracted teeth were selected with varying degrees of DF based on modified Dean's fluorosis index. Ground sections of these teeth were prepared and the sections were studied under binocular LM. Photomicrographs were taken under high power objective using 15 megapixels Nikon camera.

Results and Conclusion: Qualitative histologic changes in different grades of fluorosed teeth were evaluated in enamel, dentin, cementum and between their junctions. Fluoride interacts with enamel in both mineral phases and organic macromolecules by strong ionic and hydrogen bonds resulting in incomplete crystal growth at prism peripheries. This presents as hypomineralization of enamel and dentin, increased interglobular dentin, increased secondary curvatures and changes in cementum such as diffuse cementodentinal junction and increased thickness of Tomes' granular layer. Changes in the structure of the teeth with Dean's index below 2 and teeth with Dean's index of 2 and above were compared using Chi-square test. P value was found to be highly significant being 0.00047. Many of the features of dental fluorosis seen in the present study under light microscope are comparable to those results studied under specialized microscopes.

Matched MeSH terms: Minerals
Fulltext Composition of amino Acids, fatty acids, minerals and dietary fiber in some of the local and import rice varieties of Malaysia

Thomas, R., Bhat, Rajeev, Kuang, Y.T.

International Food Research Journal, 2015;22(3):1148-1155.
MyJurnal

In this study, three popular, regionally grown rice varieties (Bario, brown and white) were compared with three of the most popular and highly marketed imported rice varieties (black, glutinous and basmati rice) in Penang region of Malaysia. Rice samples were evaluated for amino acids, fatty acids, minerals, heavy metals and dietary fiber composition. Overall, amino acids content among all the rice samples were comparable to each other. Results with regard to minerals showed potassium to be high in brown rice (197.41 mg/100g), while magnesium was recorded to be high in black rice (107.21 mg/100g). Heavy metals such as cadmium, nickel, mercury and lead, though present, they were in negligible amounts. Among all the rice varieties investigated, the total saturated fatty acid and unsaturated fatty acid content was highest in black rice (5.89%). The soluble dietary fiber was higher in white rice (16.39%), whereas insoluble dietary fiber was high in brown (16.51%) and black rice (14.49%), respectively. Results generated from this study is anticipated to benefit both the health wary consumers (based on their potential nutritional attributes) as well as the local food industries to choose the best rice variety while developing novel rice based food products.

Matched MeSH terms: Minerals
Health benefits of Moringa oleifera

Abdull Razis AF, Ibrahim MD, Kntayya SB

Asian Pac J Cancer Prev, 2014;15(20):8571-6.
PMID: 25374169

Phytomedicines are believed to have benefits over conventional drugs and are regaining interest in current research. Moringa oleifera is a multi-purpose herbal plant used as human food and an alternative for medicinal purposes worldwide. It has been identified by researchers as a plant with numerous health benefits including nutritional and medicinal advantages. Moringa oleifera contains essential amino acids, carotenoids in leaves, and components with nutraceutical properties, supporting the idea of using this plant as a nutritional supplement or constituent in food preparation. Some nutritional evaluation has been carried out in leaves and stem. An important factor that accounts for the medicinal uses of Moringa oleifera is its very wide range of vital antioxidants, antibiotics and nutrients including vitamins and minerals. Almost all parts from Moringa can be used as a source for nutrition with other useful values. This mini-review elaborate on details its health benefits.

Matched MeSH terms: Minerals/pharmacology; Minerals/therapeutic use
Fulltext Evaluation of antidiabetic properties of Momordica charantia in streptozotocin induced diabetic rats using metabolomics approach

Perumal, V., Khoo, W.C., Abdul-Hamid, A., Ismail, A., Saari, K., Murugesu, S., et al.

International Food Research Journal, 2015;22(3):1298-1306.
MyJurnal

Momordica charantia, also known as bitter melon or ‘peria katak’ in Malaysia, is a member of the family Cucurbitaceae. Bitter melon is an excellent source of vitamins and minerals that made it extensively nutritious. Moreover, the seed, fruit and leave of the plant contain bioactive compounds with a wide range of biological activities that have been used in traditional medicines in the treatment of several diseases, including inflammation, infections, obesity and diabetes. The aim of this study was to evaluate changes in urinary metabolite profile of the normal, streptozotocin-induced type 1 diabetes and M. charantia treated diabetic rats using proton nuclear magnetic resonance (1H-NMR) -based metabolomics profiling. Study had been carried out by inducing diabetes in the rats through injection of streptozotocin, which exhibited type 1 diabetes. M. charantia extract (100 and 200 mg/kg body weight) was administrated to the streptozotocin-induced diabetic rats for one week. Blood glucose level after administration was measured to examine hypoglycemic effect of the extract. The results obtained indicated that M. charantia was effective in lowering blood glucose level of the diabetic rats. The loading plot of Partial Least Square (PLS) component 1 showed that diabetic rats had increased levels of lactate and glucose in urine whereas normal and the extract treated diabetic rats had higher levels of succinate, creatine, creatinine, urea and phenylacetylglycine in urine. While the loading plot of PLS component 2 showed a higher levels of succinate, citrate, creatine, creatinine, sugars, and hippurate in urine of normal rat compared to the extract treated diabetic rat. Administration of M. charantia extract was found to be able to regulate the altered metabolic processes. Thus, it could be potentially used to treat the diabetic patients.

Matched MeSH terms: Minerals
Effect of high-speed parameters on uncoated carbide tool in finish turning titanium Ti-6A1-4V ELI

Sulaiman M, Cbe Haron C, Ghani J, Kasim M

Sains Malaysiana, 2014;43:111-116.

In this work, the Sandvik uncoated carbide insert, CNGG 120408-SGF-H13A was used as a cutting tool in high-speed turning of titanium alloy Ti-6A1-4V EH (extra-low interstitial) with hardness of 32 HRC. Wear is one of the problems that cannot be avoided in machining process. Therefore, the objective of this paper was to investigate tool-wear behavior of various cutting-speed values (high-speed range) on the tool life of the cutting tools, especially in finishing titanium alloy. The experiments were performed under flooded coolant condition using water-based mineral-oil. The cutting speeds employed were 120, 170 and 220 mlmin. The feed rate was constant at 02 mm/rev and the depth of cut was 0.4 mm. Based on the results, the highest cutting speed of 220 m/min caused the highest wear rate. By linking the machine operations and the tool life curves obtained using flank wear data, the wear behavior of uncoated carbide was described.

Matched MeSH terms: Minerals
Fulltext Preliminary studies on the evaluation of nutritional composition of unripe and ripe ‘Kundang’ fruits (Bouea macrophylla Griffith)

Rajan, Nithiya Shanmuga, Bhat,Rajeev, Karim, A.A.

International Food Research Journal, 2014;21(3):985-990.
MyJurnal

Unripe and ripe kundang fruits (Bouea macrophylla Griffith) is either consumed fresh or is cooked in Malaysia. In this study composition of unripe and ripe fruits (proximate, amino acids profile, minerals and heavy metal contents) were evaluated. Results obtained showed unripe kundang fruit to possess higher moisture, ash, crude lipid, crude fiber and crude protein contents than the ripe fruits. With regard to amino acid contents, unripe fruits had higher content of essential amino acids. The unripe and ripe fruits were found to be rich in essential minerals with potassium (K) to be in abundance. Heavy metals such as cadmium, nickel, mercury, lead and arsenic, were detected in trace amounts (< 5.0 mg/kg) in both unripe and ripe fruits. Through this investigation, it is concluded that both unripe and ripe fruits to posses’ adequate amount of nutritionally important compounds beneficial to human health and can be explored for commercial purposes.

Matched MeSH terms: Minerals
Radium-226 and 232Th concentration in amang

Hu SJ, Kandaiya S

Health Phys, 1985 Nov;49(5):1003-7.
PMID: 4066325
Matched MeSH terms: Minerals/analysis

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links