MyMedR

Displaying publications 121 - 140 of 190 in total

Abstract:

Sort:

Design of oral intestinal-specific alginate-vitexin nanoparticulate system to modulate blood glucose level of diabetic rats

Shaedi N, Naharudin I, Choo CY, Wong TW

Carbohydr Polym, 2021 Feb 15;254:117312.
PMID: 33357875 DOI: 10.1016/j.carbpol.2020.117312

Vitexin of Ficus deltoidea exhibits intestinal α-glucosidase inhibitory and blood glucose lowering effects. This study designs oral intestinal-specific alginate nanoparticulate system of vitexin. Nanospray-dried alginate, alginate/stearic acid and alginate-C18 conjugate nanoparticles were prepared. Stearic acid was adopted to hydrophobize the matrix and minimize premature vitexin release in stomach, whereas C-18 conjugate as immobilized fatty acid to sustain hydrophobic effect and drug release. Nanoparticles were compacted with polyethylene glycol (PEG 3000, 10,000 and 20,000). The physicochemical, drug release, in vivo blood glucose lowering and intestinal vitexin content of nanoparticles and compact were determined. Hydrophobization of alginate nanoparticles promoted premature vitexin release. Compaction of nanoparticles with PEG minimized vitexin release in the stomach, with stearic acid loaded nanoparticles exhibiting a higher vitexin release in the intestine. The introduction of stearic acid reduced vitexin-alginate interaction, conferred alginate-stearic acid mismatch, and dispersive stearic acid-induced particle breakdown with intestinal vitexin release. Use of PEG 10,000 in compaction brought about PEG-nanoparticles interaction that negated initial vitexin release. The PEG dissolution in intestinal phase subsequently enabled particle breakdown and vitexin release. The PEG compacted nanoparticles exhibited oral intestinal-specific vitexin release, with positive blood glucose lowering and enhanced intestinal vitexin content in vivo.

Matched MeSH terms: Polyethylene Glycols
Fulltext Influence of electron irradiation factor on haruan traditional extract (HTE) for oral drug delivery

Ibrahim, I., Abdul Manan, M.J., Kamaruddin, H.

Jurnal Sains Nuklear Malaysia, 2014;26(1):1-8.
MyJurnal

Haruan or Channa striatus is source of protein that is widely consumed in the region and its extract
is well known for having medical values. It is of great advantage if this product could be taken
orally rather than by injection because the oral route of drug delivery is still preferred by the vast
majority of patients. However protein and peptides can be denatured or degraded by the acidic pH
of the stomach and the presence of endogenous enzymes. In order to protect or prevent digestion
and degradation of the protein in the stomach and to ensure the protein reaches the gastro
intestinal (GI) tract, Carboxymethyl Starch (CMS) nanogel system was developed using electron
irradiation method. However stability of HTE during the irradiation process needed to be studied
before being developed further. In this study, the HTE was irradiated using electron beams. Its
stability was analysed in terms of physical and chemical changes by looking at colour difference,
melting point by using Differential Scanning Calorimetry (DSC) and molecular bonds by using
Fourier Transform Infrared (FTIR) respectively. The results of this study were that no apparent
colour difference was observed with HTE before and after irradiation. These observations were
supported by the FTIR and DSC results that showed that there were no changes in molecular bonds
and melting point, compared between no irradiation and irradiation HTE during electron
irradiation up to 10 kGy. Statistically the test showed no significant difference at p < 0.005 between
melting temperatures.

Matched MeSH terms: Polyethylene Glycols
Fulltext Efficacy of selected purification techniques for bromelain

Nadzirah, K.Z., Zainal, S., Noriham, A., Normah, I.

International Food Research Journal, 2013;20(1):43-46.
MyJurnal

Bromelain is one of the vegetal proteases found in pineapple plant. It has numerous applications in food and pharmaceuticals. This review discussed different bromelain purification techniques which will assist in determining the effect of processing conditions on the purification efficacy. There are four purification techniques to be discussed, namely; reverse micellar system, aqueous two phase extraction, cation exchange chromatography and ammonium sulphate precipitation. Of the four techniques, cation exchange chromatography had shown the best bromelain purification technique with purification fold of 10.0 followed by reverse micellar system containing CTAB/ isooctane/ hexanol/ butanol, ATPE containing PEG polymer, ammonium sulphate precipitation and ATPE containing PEO-PPO-PEO with purification fold of 5.2, 4.0, 2.81 and 1.25, respectively.

Matched MeSH terms: Polyethylene Glycols
Neurotoxicity and neuroprotective effects of polyimides (P1) and polyphenylenevinylene (PPV) against hydrogen peroxide (H2O2)

Norfaezah Mazalan, Mazatulikhma Mat Zain, Nor Saliyana Jumali, Norhanim Mohalid, Zurina Shameri, Ahmad Sazali Hamzah

Scientific Research Journal, 2011;8(2):33-47.
MyJurnal

Recently, research and development in the field of drug delivery systems (DDS) facilitating site-specific therapy has reached significant progression. DDS based on polymer micelles, coated micro- and nanoparticles, and various prodrug systems including water-soluble polymer have been prepared and extensively studied as novel drugs designed for cancer chemotherapy and brain delivery. Since polymers are going to be used in human, this study has the interest of testing two types of polymer, polyimides (PI) and polyphenylenevinylene (PPV) on neuronal cells. The objective of this study was to determine the possible neurotoxicity and potential neuroprotective effects of PI and PPV towards SH-SY5Y neuronal cells challenged by hydrogen peroxide (1120) as an oxidant. Cells were pretreated with either PI or PPV for 1 hour followed by incubation for 24 hour with 100 ,uM of 11201. MTS • assay was used to assess cell viability. Results show that PI and PPV are not harmful within the concentration up to 10 pM and 100 pM, respectively. However, PI and PPV do not protect neuronal cells against toxicity induced by H2O, or further up the cell death.

Matched MeSH terms: Polyethylene Glycols
Fulltext Modification of human blood irradiation technique with the radon gas: invitro study

Asaad H. Ismail, Mohamad S. Jafaar

Journal of Nuclear and Related Technologies, 2010;2010(2):25-37.
MyJurnal

The aim of this study is to design radon irradiation technique in the field of hematology for an invitro study. In addition, deposit of alpha particles into the human blood surface and its effects on the thrombocytopenia estimated using nuclear track detectors (NTDs). In this technique, amount of radon gas (2210±5.1Bq/m 3 ) collected in a tight PVC container with the appropriate engineering dimension using two sources of radium (5μCi). Blood samples (10 male and 10 female) and CR-39NTDs (40 pieces) are exposed to radon gas at various exposure time. Complete blood test and the computer scanning for each piece of CR-39NTDs before and after exposure has done. The results show that the present technique has a good efficiency (96%) to the invitro exposure of human blood. When the radon gas moved on the surface of blood sample, alpha tracks registered into CR-39NTDs. Thus, this technique improved that the comparative method to evaluate alpha particle density into exposure blood samples is an effective way; this depended on the geometry of design and the sensitivity of CR-39NTDs to track registration. Radon detector version 7 (RAD7) used to make a certain suitability of CR- 39NTDs. Amount of radon concentration losses during the exposure process, in the present work it was variable from 0.41% to 1.4%. Radon concentration effected on the thrombocytopenia; this depended on time of exposure and alpha energy loss into the blood and CR-39 through the atomic displacements. At the time of exposure of 10 minutes, rate of absorption dose was 2.255±0.11μSv (39%), and the platelet (PLT) cont reduced rapidly (high effected on reduce PLT, this makes thrombocytopenia.

Matched MeSH terms: Polyethylene Glycols
Fulltext Highly Sensitive Humidity Sensors Based on Polyethylene Oxide/CuO/Multi Walled Carbon Nanotubes Composite Nanofibers

Ahmad W, Jabbar B, Ahmad I, Mohamed Jan B, Stylianakis MM, Kenanakis G, et al.

Materials (Basel), 2021 Feb 22;14(4).
PMID: 33671689 DOI: 10.3390/ma14041037

Polymer composites are favorite materials for sensing applications due to their low cost and easy fabrication. In the current study, composite nanofibers consisting of polyethylene oxide (PEO), oxidized multi-walled carbon nanotubes (MWCNT) and copper oxide (CuO) nanoparticles with 1% and 3% of fillers (i.e., PEO-CuO-MWCNT: 1%, and PEO-CuO-MWCNT: 3%) were successfully developed through electrospinning for humidity sensing applications. The composite nanofibers were characterized by FTIR, XRD, SEM and EDX analysis. Firstly, they were loaded on an interdigitated electrode (IDE), and then the humidity sensing efficiency was investigated through a digital LCR meter (E4980) at different frequencies (100 Hz-1 MHz), as well as the percentage of relative humidity (RH). The results indicated that the composite nanofibers containing 1% and 3% MWCNT, combined with CuO in PEO polymer matrix, showed potent resistive and capacitive response along with high sensitivity to humidity at room temperature in an RH range of 30-90%. More specifically, the PEO-CuO-MWCNT: 1% nanocomposite displayed a resistive rapid response time within 3 s and a long recovery time of 22 s, while the PEO-CuO-MWCNT: 3% one exhibited 20 s and 11 s between the same RH range, respectively.

Matched MeSH terms: Polyethylene Glycols
A randomized double blind control trial comparing filgrastim and pegfilgrastim in cyclophosphamide peripheral blood hematopoietic stem cell mobilization

Kuan JW, Su AT, Wong SP, Sim XY, Toh SG, Ong TC, et al.

Transfus Apher Sci, 2015 Oct;53(2):196-204.
PMID: 25910537 DOI: 10.1016/j.transci.2015.03.017

There are few randomized trials comparing filgrastim and pegfilgrastim in peripheral blood stem cell mobilization (PBSCM). None of the trials studied the effects of the timing of pegfilgrastim administration on the outcomes of mobilization. We conducted a randomized triple blind control trial comparing the outcomes of filgrastim 5 µg/kg daily from day 3 onwards, 'early' pegfilgrastim 6 mg on day 3 and 'delayed' pegfilgrastim 6 mg on day 7 in cyclophosphamide PBSCM in patients with no previous history of mobilization. Peripheral blood (PB) CD34+ cell count was checked on day 8 and day 11 onward. Apheresis was started when PB CD34+ ≥ 10/µl from day 11 onward. The primary outcome was the successful mobilization rate, defined as cumulative collection of ≥2 × 10(6)/kg CD34+ cells in three or less apheresis. The secondary outcomes were the day of neutrophil and platelet engraftment post transplantation. There were 156 patients randomized and 134 patients' data analyzed. Pegfilgrastim 6 mg day 7 produced highest percentage of successful mobilization, 34 out of 48 (70.8%) analyzed patients, followed by daily filgrastim, 28 out of 44 (63.6%) and day 3 pegfilgrastim, 20 out of 42 (47.6%) (p = 0.075). Pegfilgrastim day 7 and daily filgrastim reported 1.48 (p = 0.014) and 1.49 (p = 0.013) times higher successful mobilization rate respectively as compared to pegfilgrastim day 3 after adjusting for disease, gender and exposure to myelotoxic agent. Multiple myeloma patients were three times more likely to achieve successful mobilization as compared to acute leukemia or lymphoma patients. Pegfilgrastim avoided the overshoot of white cells compared to filgrastim. There was no difference in the duration of both white cells and platelet recovery post transplantation between the three interventional arms.

Matched MeSH terms: Polyethylene Glycols
Application of freeze-drying technology in manufacturing orally disintegrating films

Liew KB, Odeniyi MA, Peh KK

Pharm Dev Technol, 2016;21(3):346-53.
PMID: 25597618 DOI: 10.3109/10837450.2014.1003657

Freeze drying technology has not been maximized and reported in manufacturing orally disintegrating films. The aim of this study was to explore the freeze drying technology in the formulation of sildenafil orally disintegrating films and compare the physical properties with heat-dried orally disintegrating film. Central composite design was used to investigate the effects of three factors, namely concentration of carbopol, wheat starch and polyethylene glycol 400 on the tensile strength and disintegration time of the film. Heat-dried films had higher tensile strength than films prepared using freeze-dried method. For folding endurance, freeze-dried films showed improved endurance than heat-dried films. Moreover, films prepared using freeze-dried methods were thicker and had faster disintegration time. Formulations with higher amount of carbopol and starch showed higher tensile strength and thickness whereas formulations with higher PEG 400 content showed better flexibility. Scanning electron microscopy showed that the freeze-dried films had more porous structure compared to the heat-dried film as a result of the release of water molecule from the frozen structure when it was subjected to freeze drying process. The sildenafil film was palatable. The dissolution profiles of freeze-dried and heat-dried films were similar to Viagra® with f2 of 51.04 and 65.98, respectively.

Matched MeSH terms: Polyethylene Glycols
Fulltext Formulation development and dissolution rate enhancement of efavirenz by solid dispersion systems

Koh PT, Chuah JN, Talekar M, Gorajana A, Garg S

Indian J Pharm Sci, 2013 May;75(3):291-301.
PMID: 24082345 DOI: 10.4103/0250-474X.117434

The aim of this study was to enhance the dissolution rate of efavirenz using solid dispersion systems (binary and ternary). A comparison between solvent and fusion method was also investigated. Solid dispersions of efavirenz were prepared using polyethylene glycol 8000, polyvinylpyrrolidone K30 alone and combination of both. Tween 80 was incorporated to obtain a ternary solid dispersion system. Dissolution tests were conducted and evaluated on the basis of cumulative percentage drug release and dissolution efficiency. Physicochemical characterizations of the solid dispersions were carried out using differential scanning calorimetric, powder X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. Dissolution was remarkably improved in both systems compared to pure efavirenz (P<0.05). An optimum ratio was identified at a drug:polymer of 1:10. Incorporation of Tween 80 to 1:10 formulations formed using solvent method showed further improvement in the dissolution rate. Physicochemical characterization results suggested that efavirenz existed in the amorphous form in all the solid dispersion systems providing evidence of improvement in dissolution. No statistically significant difference (P>0.05) in dissolution was observed between the two methods. Binary and ternary solid dispersion systems both have showed a significant improvement in the dissolution rate of efavirenz. Formulations with only polyvinylpyrrolidone K30 showed best dissolution profile and 1:10 was identified as an optimum drug-polymer weight ratio.

Matched MeSH terms: Polyethylene Glycols
Fulltext Importance of screening for macroprolactin in all hyperprolactinaemic sera

Jamaluddin FA, Sthaneshwar P, Hussein Z, Othman N, Chan SP

Malays J Pathol, 2013 Jun;35(1):59-63.
PMID: 23817395 MyJurnal

Prolactin (PRL) exists in different forms in human serum. The predominant form is monomeric PRL (molecular mass 23 kDa) with smaller amounts of big PRL (molecular mass 50-60 kDa) and at times macroprolactin (molecular mass 150-170 kDa). Macroprolactin, generally considered to be biologically inactive, accounts for the major part of prolactin in some patients. Different immunoassays for prolactin differ in reactivity with this macromolecular complex.

Matched MeSH terms: Polyethylene Glycols
Fulltext Production of Nanoemulsions from Palm-Based Tocotrienol Rich Fraction by Microfluidization

Goh PS, Ng MH, Choo YM, Amru NB, Chuah CH

Molecules, 2015;20(11):19936-46.
PMID: 26556328 DOI: 10.3390/molecules201119666

In the present study, tocotrienol rich fraction (TRF) nanoemulsions were produced as an alternative approach to improve solubility and absorption of tocotrienols. In the present study, droplet size obtained after 10 cycles of homogenization with increasing pressure was found to decrease from 120 to 65.1 nm. Nanoemulsions stabilized with Tween series alone or emulsifier blend Brij 35:Span 80 (0.6:0.4 w/w) homogenized at 25,000 psi and 10 cycles, produced droplet size less than 100 nm and a narrow size distribution with a polydispersity index (PDI) value lower than 0.2. However blend of Tween series with Span 80 produced nanoemulsions with droplet size larger than 200 nm. This work has also demonstrated the amount of tocols losses in TRF nanoemulsion stabilized Tweens alone or emulsifier blend Brij 35:Span 80 (0.6:0.4 w/w) ranged between 3%-25%. This can be attributed to the interfacial film formed surrounding the droplets exhibited different level of oxidative stability against heat and free radicals created during high pressure emulsification.

Matched MeSH terms: Polyethylene Glycols
Formulation and optimization of gastric floating drug delivery system using Central composite design and its biopharmaceutical evaluation

Meka VS, Thing LK, Gorajana A, Kolapalli VR

Pak J Pharm Sci, 2015 Jul;28(4):1373-87.
PMID: 26142528

The present work investigates the formulation and biopharmaceutical estimation of gastric floating drug delivery system (GFDDS) of propranolol HCl using semi-synthetic polymer carboxymethyl ethyl cellulose (CMEC) and a synthetic polymer polyethylene oxide (PEO). A central composite design was applied for optimization of polymer quantity (CMEC or PEO) and sodium bicarbonate concentration as independent variables. The dependent variables evaluated were: % of drug release at 1 hr (D1hr), % drug release at 3 hr (D3hr) and time taken for 95% of drug release (t95). Numerical optimization and graphical optimization were conducted to optimize the response variables. All observed responses of statistically optimized formulations were in high treaty with predicted values. Accelerated stability studies were conducted on the optimized formulations at 40 ± 2°C/75% ± 5% RH and confirm that formulations were stable. Optimized formulations were evaluated for in vivo buoyancy characterization in human volunteers and were found buoyant in gastric fluid. Gastric residence time was enhanced in the fed but not the fasted state. The optimized formulations and marketed formulation were administered to healthy human volunteers and evaluated for pharmacokinetic parameters. Mean residence time (MRT) was prolonged and AUC levels were increased for both optimized floating tablets when compared with marketed product. High relative bioavailability obtained with optimized gastric floating tablets compared to commercial formulation, indicated the improvement of bioavailability.

Matched MeSH terms: Polyethylene Glycols
Effect of Paclitaxel-Loaded PLGA Nanoparticles on MDA-MB Type Cell Lines: Apoptosis and Cytotoxicity Studies

Vijayan V, Shalini K, Yugesvaran V, Yee TH, Balakrishnan S, Palanimuthu VR

Curr Pharm Des, 2018;24(28):3366-3375.
PMID: 30179118 DOI: 10.2174/1381612824666180903110301

BACKGROUND: Triple-Negative Breast Cancer is an aggressive type of breast cancer, which is not treatable by chemotherapy drugs, due to the lack of Estrogen Receptor (ER), Progesterone Receptor (PR) expression and Human Epidermal Growth Factor Receptor 2 (HER2) on the cell surface.
OBJECTIVE: The aim of this study was to compare the effect of paclitaxel loaded PLGA nanoparticle (PTX-NPs) on the cytotoxicity and apoptosis of the different MDA-MB type of cell lines.
METHOD: PTX-NPs were prepared by nanoprecipitation method and characterized earlier. The cytotoxicity of PTX-NPs was evaluated by MTT and LDH assay, later apoptosis was calculated by flow cytometry analysis.
RESULTS: The prepared NP size of 317.5 nm and zetapontial of -12.7 mV showed drug release of 89.1 % at 48 h. MDA-MB-231 type cell showed significant cytotoxicity by MTT method of 47.4 ± 1.2 % at 24 h, 34.6 ± 0.8 % at 48 h and 23.5 ± 0.5 % at 72 h and LDH method of 35.9 ± 1.5 % at 24 h, 25.4 ± 0.6 % at 48 h and 19.8 ± 2.2 % at 72 h with apoptosis of 47.3 ± 0.4 %.
CONCLUSION: We have found that PTX-NPs showed the cytotoxic effect on all the MDA-MB cancer cell lines and showed potent anticancer activities against MDA-MB-231 cell line via induction of apoptosis.

Matched MeSH terms: Polyethylene Glycols/chemistry*
Synthesis and Characterization of PLGA-PEG Thymoquinone Nanoparticles and Its Cytotoxicity Effects in Tamoxifen-Resistant Breast Cancer Cells

Ahmad R, Kaus NHM, Hamid S

Adv Exp Med Biol, 2020;1292:65-82.
PMID: 30560443 DOI: 10.1007/5584_2018_302

INTRODUCTION: Drug resistance has been a continuous challenge in cancer treatment. The use of nanotechnology in the development of new cancer drugs has potential. One of the extensively studied compounds is thymoquinone (TQ), and this work aims to compare two types of TQ-nanoformulation and its cytotoxicity toward resistant breast cancer cells.
METHOD: TQ-nanoparticles were prepared and optimized by using two different formulations with different drugs to PLGA-PEG ratio (1:20 and 1:7) and different PLGA-PEG to Pluronic F68 ratio (10:1 and 2:1). The morphology and size were determined using TEM and DLS. Characterization of particles was done using UV-VIS, ATR-IR, entrapment efficiency, and drug release. The effects of drug, polymer, and surfactants were compared between the two formulations. Cytotoxicity assay was performed using MTS assay.
RESULTS: TEM finding showed 96% of particles produced with 1:7 drug to PLGA-PEG were less than 90 nm in size and spherical in shape. This was confirmed with DLS which showed smaller particle size than those formed with 1:20 drug to PLGA-PEG ratio. Further analysis showed zeta potential was negatively charged which could facilitate cellular uptake as reported previously. In addition, PDI value was less than 0.1 in both formulations indicating monodispersed and less broad in size distribution. The absorption peak of PLGA-PEG-TQ-Nps was at 255 nm. The 1:7 drug to polymer formulation was selected for further analysis where the entrapment efficiency was 79.9% and in vitro drug release showed a maximum release of TQ of 50%. Cytotoxicity result showed IC50 of TQ-nanoparticle at 20.05 μM and free TQ was 8.25 μM.
CONCLUSION: This study showed that nanoparticle synthesized with 1:7 drug to PLGA-PEG ratio and 2:1 PLGA-PEG to Pluronic F68 formed nanoparticles with less than 100 nm and had spherical shape as confirmed with DLS. This could facilitate its transportation and absorption to reach its target. There was conserved TQ stability as exhibited slow release of this volatile oil. The TQ-nanoparticles showed selective cytotoxic effect toward UACC 732 cells compared to MCF-7 breast cancer cells.

Matched MeSH terms: Polyethylene Glycols/chemistry*
Modified enzymes for reactions in organic solvents

Salleh AB, Basri M, Taib M, Jasmani H, Rahman RN, Rahman MB, et al.

Appl Biochem Biotechnol, 2002 10 25;102-103(1-6):349-57.
PMID: 12396136

Recent studies on biocatalysis in water-organic solvent biphasic systems have shown that many enzymes retain their catalytic activities in the presence of high concentrations of organic solvents. However, not all enzymes are organic solvent tolerant, and most have limited and selective tolerance to particular organic solvents. Protein modification or protein tailoring is an approach to alter the characteristics of enzymes, including solubility in organic solvents. Particular amino acids may play pivotal roles in the catalytic ability of the protein. Attaching soluble modifiers to the protein molecule may alter its conformation and the overall polarity of the molecule. Enzymes, in particular lipases, have been chemically modified by attachment of aldehydes, polyethylene glycols, and imidoesters. These modifications alter the hydrophobicity and conformation of the enzymes, resulting in changes in the microenvironment of the enzymes. By these modifications, newly acquired properties such as enhancement of activity and stability and changes in specificity and solubility in organic solvents are obtained. Modified lipases were found to be more active and stable in organic solvents. The optimum water activity (a(w)) for reaction was also shifted by using modified enzymes. Changes in enantioselective behavior were also observed.

Matched MeSH terms: Polyethylene Glycols/chemistry
Response Surface Methodology Modelling of an Aqueous Two-Phase System for Purification of Protease from Penicillium candidum (PCA 1/TT031) under Solid State Fermentation and Its Biochemical Characterization

Alhelli AM, Abdul Manap MY, Mohammed AS, Mirhosseini H, Suliman E, Shad Z, et al.

Int J Mol Sci, 2016 Nov 11;17(11).
PMID: 27845736

Penicillium candidum (PCA 1/TT031) synthesizes different types of extracellular proteases. The objective of this study is to optimize polyethylene glycol (PEG)/citrate based on an aqueous two-phase system (ATPS) and Response Surface Methodology (RSM) to purify protease from Penicillium candidum (PCA 1/TT031). The effects of different PEG molecular weights (1500-10,000 g/mol), PEG concentration (9%-20%), concentrations of NaCl (0%-10%) and the citrate buffer (8%-16%) on protease were also studied. The best protease purification could be achieved under the conditions of 9.0% (w/w) PEG 8000, 5.2% NaCl, and 15.9% sodium citrate concentration, which resulted in a one-sided protease partitioning for the bottom phase with a partition coefficient of 0.2, a 6.8-fold protease purification factor, and a yield of 93%. The response surface models displayed a significant (p ≤ 0.05) response which was fit for the variables that were studied as well as a high coefficient of determination (R²). Similarly, the predicted and observed values displayed no significant (p > 0.05) differences. In addition, our enzyme characterization study revealed that Penicillium candidum (PCA 1/TT031) produced a slight neutral protease with a molecular weight between 100 and 140 kDa. The optimal activity of the purified enzyme occurred at a pH of 6.0 and at a temperature of 50 °C. The stability between different pH and temperature ranges along with the effect of chemical metal ions and inhibitors were also studied. Our results reveal that the purified enzyme could be used in the dairy industry such as in accelerated cheese ripening.

Matched MeSH terms: Polyethylene Glycols/chemistry
PVA-PEG physically cross-linked hydrogel film as a wound dressing: experimental design and optimization

Ahmed AS, Mandal UK, Taher M, Susanti D, Jaffri JM

Pharm Dev Technol, 2018 Oct;23(8):751-760.
PMID: 28378604 DOI: 10.1080/10837450.2017.1295067

The development of hydrogel films as wound healing dressings is of a great interest owing to their biological tissue-like nature. Polyvinyl alcohol/polyethylene glycol (PVA/PEG) hydrogels loaded with asiaticoside, a standardized rich fraction of Centella asiatica, were successfully developed using the freeze-thaw method. Response surface methodology with Box-Behnken experimental design was employed to optimize the hydrogels. The hydrogels were characterized and optimized by gel fraction, swelling behavior, water vapor transmission rate and mechanical strength. The formulation with 8% PVA, 5% PEG 400 and five consecutive freeze-thaw cycles was selected as the optimized formulation and was further characterized by its drug release, rheological study, morphology, cytotoxicity and microbial studies. The optimized formulation showed more than 90% drug release at 12 hours. The rheological properties exhibited that the formulation has viscoelastic behavior and remains stable upon storage. Cell culture studies confirmed the biocompatible nature of the optimized hydrogel formulation. In the microbial limit tests, the optimized hydrogel showed no microbial growth. The developed optimized PVA/PEG hydrogel using freeze-thaw method was swellable, elastic, safe, and it can be considered as a promising new wound dressing formulation.

Matched MeSH terms: Polyethylene Glycols/chemistry*
Fulltext 'Heat-treatment aqueous two phase system' for purification of serine protease from Kesinai (Streblus asper) leaves

Mehrnoush A, Mustafa S, Yazid AM

Molecules, 2011 Dec 08;16(12):10202-13.
PMID: 22158589 DOI: 10.3390/molecules161210202

A 'Heat treatment aqueous two phase system' was employed for the first time to purify serine protease from kesinai (Streblus asper) leaves. In this study, introduction of heat treatment procedure in serine protease purification was investigated. In addition, the effects of different molecular weights of polyethylene glycol (PEG 4000, 6000 and 8000) at concentrations of 8, 16 and 21% (w/w) as well as salts (Na-citrate, MgSO₄ and K₂HPO₄) at concentrations of 12, 15, 18% (w/w) on serine protease partition behavior were studied. Optimum conditions for serine protease purification were achieved in the PEG-rich phase with composition of 16% PEG6000-15% MgSO₄. Also, thermal treatment of kesinai leaves at 55 °C for 15 min resulted in higher purity and recovery yield compared to the non-heat treatment sample. Furthermore, this study investigated the effects of various concentrations of NaCl addition (2, 4, 6 and 8% w/w) and different pH (4, 7 and 9) on the optimization of the system to obtain high yields of the enzyme. The recovery of serine protease was significantly enhanced in the presence of 4% (w/w) of NaCl at pH 7.0. Based on this system, the purification factor was increased 14.4 fold and achieved a high yield of 96.7%.

Matched MeSH terms: Polyethylene Glycols/chemistry
Fulltext Synthesis and characterization of polyethylene glycol mediated silver nanoparticles by the green method

Shameli K, Ahmad MB, Jazayeri SD, Sedaghat S, Shabanzadeh P, Jahangirian H, et al.

Int J Mol Sci, 2012;13(6):6639-50.
PMID: 22837654 DOI: 10.3390/ijms13066639

The roles of green chemistry in nanotechnology and nanoscience fields are very significant in the synthesis of diverse nanomaterials. Herein, we report a green chemistry method for synthesized colloidal silver nanoparticles (Ag NPs) in polymeric media. The colloidal Ag NPs were synthesized in an aqueous solution using silver nitrate, polyethylene glycol (PEG), and β-D-glucose as a silver precursor, stabilizer, and reducing agent, respectively. The properties of synthesized colloidal Ag NPs were studied at different reaction times. The ultraviolet-visible spectra were in excellent agreement with the obtained nanostructure studies performed by transmission electron microscopy (TEM) and their size distributions. The Ag NPs were characterized by utilizing X-ray diffraction (XRD), zeta potential measurements and Fourier transform infrared (FT-IR). The use of green chemistry reagents, such as glucose, provides green and economic features to this work.

Matched MeSH terms: Polyethylene Glycols/chemistry*
Fulltext Recombinant long-acting glycoPEGylated factor IX in hemophilia B: a multinational randomized phase 3 trial

Collins PW, Young G, Knobe K, Karim FA, Angchaisuksiri P, Banner C, et al.

Blood, 2014 Dec 18;124(26):3880-6.
PMID: 25261199 DOI: 10.1182/blood-2014-05-573055

This multinational, randomized, single-blind trial investigated the safety and efficacy of nonacog beta pegol, a recombinant glycoPEGylated factor IX (FIX) with extended half-life, in 74 previously treated patients with hemophilia B (FIX activity ≤2 IU/dL). Patients received prophylaxis for 52 weeks, randomized to either 10 IU/kg or 40 IU/kg once weekly or to on-demand treatment of 28 weeks. No patients developed inhibitors, and no safety concerns were identified. Three hundred forty-five bleeding episodes were treated, with an estimated success rate of 92.2%. The median annualized bleeding rates (ABRs) were 1.04 in the 40 IU/kg prophylaxis group, 2.93 in the 10 IU/kg prophylaxis group, and 15.58 in the on-demand treatment group. In the 40 IU/kg group, 10 (66.7%) of 15 patients experienced no bleeding episodes into target joints compared with 1 (7.7%) of 13 patients in the 10 IU/kg group. Health-related quality of life (HR-QoL) assessed with the EuroQoL-5 Dimensions visual analog scale score improved from a median of 75 to 90 in the 40 IU/kg prophylaxis group. Nonacog beta pegol was well tolerated and efficacious for the treatment of bleeding episodes and was associated with low ABRs in patients receiving prophylaxis. Once-weekly prophylaxis with 40 IU/kg resolved target joint bleeds in 66.7% of the affected patients and improved HR-QoL. This trial was registered at www.clinicaltrials.gov as #NCT01333111.

Matched MeSH terms: Polyethylene Glycols/administration & dosage*

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links