The morphology and 12 shell morphometric features proportionate to shell length were analysed between local hard clam; Meretrix lyrata, M. meretrix and M. lusoria from Sarawak, Malaysia. Meretrix spp. was observed to comprise a unique feature of a pallial sinus scar for each species. Analysis of variance revealed significant differences among Meretrix spp. using proportion ratios of SL for SW; LL; AL; LCT; AW; PW and PS (p<0.05). Cluster analysis among morphometric features of M. lyrata, M. meretrix and M. lusoria were discriminated at 98.5% similarities and supported by the principal component analysis. The present study suggests that pallial sinus scar shape, together with interior and exterior morphometric features, were suitable as identification keys for Meretrix spp. Hence, the present study emphasizes on the application of interior, rather than exterior morphology and morphometric features in hard clam identification before further investigation can be performed through genetic identification means.
Early cancer diagnosis remains the holy-grail in the battle against cancers progression. Tainted with debates and medical challenges, current therapeutic approaches for prostate cancer (PCa) lack early preventive measures, rapid diagnostic capabilities, risk factors identification, and portability, i.e. the inherent attributes offered by the label-free biosensing devices. Electronic assisted immunosensing systems inherit the high sensitivity and specificity properties due to the predilection of the antigen-antibody affinity. Bioelectronic immunosensor for PCa has attracted much attentions among the researchers due to its high-performance, easy to prepare, rapid feedback, and possibility for miniaturization. This review explores the current advances on bioelectronic immunosensors for the detection of PCa biomarker revealed in the past decade. The research milestones and current trends of the immunosensors are reported to project the future visions in order to propel their "lab-to-market" realization.
This review covers a developmental progression on early to modern taxonomy at cellular level following the advent of electron microscopy and the advancement in deoxyribonucleic acid (DNA) extraction for expatiation of biological classification at DNA level. Here, we discuss the fundamental values of conventional chemical methods of DNA extraction using liquid/liquid extraction (LLE) followed by development of solid-phase extraction (SPE) methods, as well as recent advances in microfluidics device-based system for DNA extraction on-chip. We also discuss the importance of DNA extraction as well as the advantages over conventional chemical methods, and how Lab-on-a-Chip (LOC) system plays a crucial role for the future achievements.
A patient presenting with an ear polyp is a common finding in otorhinolaryngology practice. The common causes include chronic otitis media and cholesteatoma. We report an adult female patient with a history of acute leukaemia presenting with chronic otitis media symptoms and right ear polyp. She was subsequently diagnosed as relapse of B-cell acute lymphoblastic leukaemia based on histopathological examination. The presentation may be similar to an inflammatory pathology of the middle ear, making it misleading.
This paper proposes the correction of faulty sensors using a synthesis of the greedy sparse constrained optimization GSCO) technique. The failure of sensors can damage the radiation power pattern in terms of sidelobes and nulls. The synthesis problem can recover the wanted power pattern with reduced number of sensors into the background of greedy algorithm and solved with orthogonal matching pursuit (OMP) technique. Numerical simulation examples of linear arrays are offered to demonstrate the effectiveness of getting the wanted power pattern with a reduced number of antenna sensors which is compared with the available techniques in terms of sidelobes level and number of nulls.
The exploration of new natural fibers in the field of polymer composites can contribute to increase the invention of natural reinforcements and expand their use in possible applications. In the present work, the physico-chemical, thermal, tensile and morphological properties of Furcraea foetida (FF) fiber are presented for the first time. Chemical analysis results shows that FF has relatively higher cellulose (68.35%) with lower hemicelluloses (11.46%) and lignin (12.32%). Structural analysis of FF was conducted by Fourier transform infrared and13C (CP-MAS) nuclear magnetic resonance spectroscopy. X-ray diffraction (XRD) analysis evidenced that FF has crystallinity index of 52.6% with crystalline size of 28.36nmThe surface morphology of FF was investigated by scanning electron microscopy (SEM), energy dispersive X-ray micro analyzer (EDX) and atomic force microscopy (AFM). The thermogravimetric analysis (TGA) reveals thermal constancy of the fiber upto 320.5°C with the kinetic activation energy of 66.64kJ/mol, which can be used as reinforcements in thermoplastic green composite whose working temperatures is below 300°C. The FF results were compared with those of other natural fibers, and indicated as a suitable alternative source for composite manufacture.
A series of glass samples with chemical formula {[(TeO2)0.7(B2O3)0.3]0.7(ZnO)0.3}1-x(Dy2O3)xwhere x=0.01, 0.02, 0.03, 0.04 and 0.05M fraction were synthesized through conventional melt-quenching method. The most common way to fabricate a glass material is by fusion of two or more component oxides followed by their quenching. This technique is known as melt-quenching technique. Kaur et al. (2016) [1] highlighted that the melt-quenching method able to enhance the mechanical properties like hardness and flexural strength of the material. The nature of the glass systems is proven to be amorphous based on the XRD pattern. The FTIR spectra of the glass systems confirm the existence of five bands which are assigned for the BO4, BO3,TeO4and TeO3vibrational groups. The density of the glass systems is increased with the addition of Dy2O3while the molar volume is found to be inversely proportional to the density of the proposed glass. The optical properties of the glasses are determined through the absorption spectra obtained from the UV-VIS spectrophotometer. From the absorption spectra, the indirect and direct optical band gaps and the Urbach energy are found to be inversely proportional to each other. As the molar fraction of the Dy2O3increased, the optical band gaps are observed to increase as opposed to the Urbach energy. For this glass system, the values of refractive index, electronic polarizability, oxide ion polarizability and the optical basicity are found to decrease as the addition of the dysprosium oxide is increased. From the emission spectra, two intense blue and yellow emission bands are observed, which correspond to the4F9/2→6H15/2and4F9/2→6H13/2transitions of Dy3+ions respectively. The CIE chromaticity coordinates of the zinc borotellurite glass systems are found to be located in the white light region.
Crouzon syndrome exhibits considerable phenotypic heterogeneity, in the aetiology of which genetics play an important role. FGFR2 mediates extracellular signals into cells and the mutations in the FGFR2 gene cause this syndrome occurrence. Activated FGFs/FGFR2 signaling disrupts the balance of differentiation, cell proliferation, and apoptosis via its downstream signal pathways. However, very little is known about the cellular and molecular factors leading to severity of this phenotype. Revealing the molecular pathology of craniosynostosis will be a great value for genetic counselling, diagnosis, prognosis and early intervention programs. This mini-review summarizes the fundamental and recent scientific literature on genetic disorder of Crouzon syndrome and presents a graduated strategy for the genetic approach, diagnosis and the management of this complex craniofacial defect.
Interaction between split RNA aptamer and the clinically important target, HIV-1 Tat was investigated on a biosensing surface transduced by functionally choreographed multiwall carbon nanotubes (MWCNTs). Acid oxidation was performed to functionalize MWCNTs with carboxyl functional groups. X-ray photoelectron spectroscopy analysis had profound ~2.91% increment in overall oxygen group and ~1% increment was noticed with a specific carboxyl content owing to CO and OCO bonding. The interaction between split RNA aptamer and HIV-1 Tat protein was quantified by electrical measurements with the current signal (Ids) over a gate voltage (Vgs). Initially, 34.4 mV gate voltage shift was observed by the immobilization of aptamer on MWCNT. With aptamer and HIV-1 Tat interaction, the current flow was decreased with the concomitant gate voltage shift of 23.5 mV. The attainment of sensitivity with split aptamer and HIV-1 Tat interaction on the fabricated device was 600 pM. To ensure the genuine interaction of aptamer with HIV-1 Tat, other HIV-1 proteins, Nef and p24 were interacted with aptamer and they displayed the negligible interferences with gate voltage shift of 3.5 mV and 5.7 mV, which shows 4 and 2.5 folds lesser than HIV-1 Tat interaction, respectively.
The efficiency of GUS (β-Glucuronidase) gene expression in embryogenic callus and young leaflets of mature and seedling palm after microprojectile bombardment with five constructs (pEmuGN, pAHC25, pAct1-F4, pGH24 and pBARGUS) was evaluated to identify the most suitable promoter(s) to use in transformation attempts in oil palm. Expression of the GUS gene driven by theEmu, Ubi1, Act1 35S orAdh1 was assayed, both histochemically and fluorometrically, from a total of 200 plates of tissues in eight independent experiments two days after bombardment. A completely randomized experimental design was used for each experiment, and the data analysed by ANOVA and Duncan's Multiple Range Test. The expression level of GUS driven by theEmu orUbi1 promoters was significantly higher than that of the Act], 35S and Adhl promoters in many experiments, and that of theAdhl was significantly lower than those of the other four promoters. Both histochemical and fluorometric data indicate that in embryogenic callus, the expression of theEmu promoter was higher than that of theUbi1 whereas in young leaflets from mature palm the Ubi1 expression was stronger. The performances of the five promoters were also tested in tobacco callus using a fluorometric GUS assay. The activity of the 35S promoter was highest, and significantly different from that of all the other promoters except theEmu, and that of theAct1 promoter was lowest. These results indicate that either theUbil orEmu promoter should facilitate the expression of desired genes in oil palm and aid in development of an efficient stable transformation system.
This paper primarily demonstrates the approach to enhance the sensing performance on antigen C-reactive protein (CRP) and anti-CRP antibody binding event. A nanogapped electrode structure with the gap of ~100 nm was modified by the anti-CRP antibody (Probe) to capture the available CRP. In order to increase the amount of antigen to be captured, a gold nanorod with 119 nm in length and 25 nm in width was integrated, to increase the surface area. A comparative study between the existence and non-existence of gold nanorod utilization was evaluated. Analysis of the sensing surface was well-supported by atomic force microscopy, scanning electron microscopy, 3D nano-profilometry, high-power microscopy and UV-Vis spectroscopy. The dielectric voltammetric analysis was carried out from 0 V to 2 V. The sensitivity was calculated based on 3σ and attained as low as 1 pM, which is tremendously low compared to real CRP concentration (119 nM) in human blood serum. The gold nanorod conjugation with antibody has enhanced the sensitivity to 100 folds (10 fM). The specificity of the CRP detection by the proposed strategy was anchored by ELISA and failure in the detection of human blood clotting factor IX by voltammetry. Despite, CRP antigen was further detected in human serum by spiking CRP to run-through the detection with the physiologically relevant samples.
Introduction: Diabetic retinopathy (DR) is one of the commonest complications of diabetes mellitus. This study was to determine the prevalence of DR and its association with chronic kidney disease (CKD), high HbA1c and dyslipidemia among diabetic patients in government primary care clinics.
Materials and Methods: A cross sectional study was carried out. The respondents were selected from diabetic registry at two government primary care clinics in Kuantan, Pahang via stratified random sampling method during the study period from May 2010 to April 2011. The respondents were interviewed and assessed clinically using a structured questionnaire. Retinal examination was performed by accredited staff using non-mydratic retinal imaging and DR was classified according to the International Clinical Diabetic Retinopathy Disease Severity Scale.
Results: Out of 400 respondents, 58.8% were diagnosed with diabetes less than 5 years and 51.0% had uncontrolled blood pressure (>130/80 mmHg). The prevalence of DR and maculopathy were 33.5% and of 17.8% respectively. Most of these patients (22.3%) had mild non-proliferative DR. DR patients had higher percentages CKD (17.9% vs. 6.8%; p<0.001) and a higher mean of HbA1C (8.69 vs. 8.11; p=0.015) compared to non-DR patients. The study revealed that DR was independently associated with CKD {OR: 3.46, 95% CI (1.76, 6.80)} and high HbA1c {OR: 1.12, 95% CI (1.02, 1.23)}. Those with dyslipidemia however, has 39% less risk of DR {OR: 0.61, 95% CI (0.39, 0.94)}.
Conclusion: This study showed that diabetic patients with CKD and high HbA1c have greater risks to develop DR but has protective risk with dyslipidemia.
KEYWORDS: diabetic retinopathy (DR), non-mydratic retinal camera, primary care clinic
The pragmatic outcome of a lung cancer diagnosis is closely interrelated in reducing the number of fatal death caused by the world's top cancerous disease. Regardless of the advancement made in understanding lung tumor, and its multimodal treatment, in general the percentage of survival remain low. Late diagnosis of a cancerous cell in patients is the major hurdle for the above circumstances. In the new era of a lung cancer diagnosis with low cost, portable and non-invasive clinical sampling, nanotechnology is at its inflection point where current researches focus on the implementation of biosensor conjugated nanomaterials for the generation of the ideal sensing. The present review encloses the superiority of nanomaterials from zero to three-dimensional nanostructures in its discrete and nanocomposites nanotopography on sensing lung cancer biomarkers. Recent researches conducted on definitive nanomaterials and nanocomposites at multiple dimension with distinctive physiochemical property were focused to subside the cases associated with lung cancer through the development of novel biosensors. The hurdles encountered in the recent research and future preference with prognostic clinical lung cancer diagnosis using multidimensional nanomaterials and its composites are presented.
This study aimed to evaluate effective dose and size-specific dose estimate (SSDE) of computed tomography angiography (CTA) examination using an anthropomorphic phantom. We included three CTA examination protocols to evaluate the intra- and extra-cranial arteries, pulmonary artery (CTPA), and abdominal vessels. Patient SSDEs were measured retrospectively to estimate patient dose, relative to the bodyweight of the patient and volume CT dose index (CTDIvol). Our findings revealed that the highest dose was absorbed by the left lobe of the thyroid gland during intra-/extra-cranial CTA and CTPA, that is, 14.11 ± 0.24 mGy and 16.20 ± 3.95 mGy, respectively. However, the highest absorbed dose in abdominal/pelvic CTA was the gonads (8.98 ± 0.30 mGy), while other radiosensitive organs in intra- and extra-cranial CTA, CTPA, and abdominal/pelvic CTA did not demonstrate significant differences between organs/structures with p value 0.88, 0.11, and 0.54, respectively. The estimated effective dose in intra-/extra-cranial CTA was lower in patients (0.80 ± 0.60 mSv) than in the phantom (0.83 mSv), but it was the opposite for CTPA, with the effective dose being higher in patients (7.54 ± 3.09 mSv) than in the phantom (6.68 mSv). Similar to the effective dose, only CTPA SSDEs were significantly higher in men than in women (19.74 ± 4.79 mGy versus 7.9 mGy). Effective dose and SSDE are clinically relevant parameters that can help estimate a more accurate patient dose based on a patient's size.
Since its inception in 1919, the Journal of Dental Research has continually published high-quality articles that span the breadth of research topics relevant to dentistry, oral surgery, and medicine. As part of the journal's centennial celebration, we conducted an electronic search on Scopus to identify and analyze the top 100 most cited articles from 1919 to 2018. Since Scopus does not capture older citations, we conducted an additional analysis by Google Scholar to identify key articles published in the first 50 y of the journal. Based on Scopus, the articles were ranked in descending order per their citation counts. The citation counts of the 100 most cited articles varied from 262 to 1,503. The year in which the largest number of top 100 articles were published was 2004 (n = 6). Within the top 100, the majority of articles originated from the United States (n = 52). Research Reports-Biomaterials & Bioengineering was the most frequent category of cited articles (n = 35). There was no significant association between total citation count and time since publication (correlation coefficient = -0.051, P = 0.656). However, there was a significant negative association of citation density (correlation coefficient = -0.610, P < 0.01) with time since publication. Our analyses demonstrate the broad reach of the journal and the dynamics in citation patterns and research agenda over its 100-y history. There is considerable evidence of the high variance in research output, when measured via citations, across the globe. Moreover, it remains unclear how patients' priorities and dental health care needs are aligned with the perceived influence of single research pieces identified by our search. Our findings may help to inspire future research in tackling these inequalities and highlight the need for conceptualizing research priorities.
A method is described for the electrochemical determination of squamous cell carcinoma (SCC) antigen, and by testing the effect of 30 nm gold nanoparticles (GNPs). Three comparative studies were performed in the presence and absence of GNPs, and with agglomerated GNPs. The divalent ion Ca(II) was used to induce a strong agglomeration of GNPs, as confirmed by colorimetry and voltammetry. Herein, colorimetry was used to test the best amount of salt needed to aggregate the GNPs. Despite, voltammetry was used to determine the status of biomolecules on the sensor. The topography of the surface of ZnO-coated interdigitated electrodes was analyzed by using 3D-nano profilometry, scanning electron microscopy, atomic force microscopy and high-power microscopy. The interaction between SCC antigen and antibody trigger vibrations on the sensor and cause dipole moment, which was measured using a picoammeter with a linear sweep from 0 to 2 V at 0.01 V step voltage. The sensitivity level was 10 fM by 3σ calculation for the dispersed GNP-conjugated antigen. This indicates a 100-fold enhancement compared to the condition without GNP conjugation. However, the sensitivity level for agglomerated GNPs conjugated antibody was not significant with 100 fM sensitivity. Specificity was tested for other proteins in serum, namely blood clotting factor IX, C-reactive protein, and serum albumin. The SCC antigen was quantified in spiked serum and gave recoveries that ranged between 80 and 90%. Graphical abstractSchematic representation of SCC (squamous cell carcinoma) antigen determination using divalent ion induced agglomerated GNPs. Sensitivity increment depends on the occurrence of more SCC antigen and antibody binding event via GNPs integration. Notably, lower detection limit was achieved at femto molar with proper orientation of biological molecules.
Cardiovascular disease (CVD) has become one of the leading causes of morbidity and mortality in both men and women. According to the World Health Organization (WHO), ischemic heart disease is the major issue due to the narrowing of the coronary artery by plaque formation on the artery wall, which causes an inadequate flow of oxygen and blood to the heart and is called 'coronary artery disease'. The CVD death rate increased by up to 15% in 2016 (~17.6 million) compared to the past decade. This tremendous increment urges the development of a suitable biomarker for rapid and early diagnosis. Currently, C-reactive protein (CRP) is considered an outstanding biomarker for quick and accurate outcomes in clinical analyses. Various techniques have also been used to diagnose CVD, including surface plasmon resonance (SPR), colorimetric assay, enzyme-linked immunosorbent assay (ELISA), fluoro-immunoassays, chemiluminescent assays, and electrical measurements. This review discusses such diagnostic strategies and how current, cutting-edge technologies have enabled the development of high-performance detection methodologies. Concluding remarks have been made concerning the clinical significance and the use of nanomaterial in medical diagnostics towards nanotheranostics.
Reduced graphene oxide (rGO) is widely utilised to develop various types of biosensors; however, producing self-assembled rGO nanoflake networks through single-droplet drop-casting remains inconsistent. In the present work, we systematically used three different methods to prepare rGO suspensions in order to produce large scale self-assembled rGO nanoflake networks through single-droplet drop-casting. The rGO suspensions were prepared using only deionised water with no added any chemicals/organic solvents, which we considered to be a low-cost method. Subsequently, the most effective preparation method was used to deposit rGO nanoflakes onto commercial gold interdigitated microelectrodes (Au-IDE) to examine their electrical performance. Assessment of the yields, developed methods, surface morphologies, spectroscopy and structural analyses of the as-prepared rGO nanoflakes were conducted. The results revealed that method-3 (involving sonication, centrifugation and post-sonication) produced large self-assembled rGO nanoflake networks with strong adhesion to glass substrates. Furthermore, the as-prepared rGO/Au-IDE modified sensors showed excellent electron mobility where the electrical conductivity was enhanced approximately ~ 1000 fold compared to the bare devices. The present work provided new insights for depositing large self-assembled interconnected rGO nanoflake networks through single-droplet drop-casting which will be beneficial for biosensor development and other downstream applications.
Transmission opportunity (TXOP) is a key factor to enable efficient channel bandwidth utilization over wireless campus networks (WCN) for interactive multimedia (IMM) applications. It facilitates in resource allocation for the similar categories of multiple packets transmission until the allocated time is expired. The static TXOP limits are defined for various categories of IMM traffics in the IEEE802.11e standard. Due to the variation of traffic load in WCN, the static TXOP limits are not sufficient enough to guarantee the quality of service (QoS) for IMM traffic flows. In order to address this issue, several existing works allocate the TXOP limits dynamically to ensure QoS for IMM traffics based on the current associated queue size and pre-setting threshold values. However, existing works do not take into account all the medium access control (MAC) overheads while estimating the current queue size which in turn is required for dynamic TXOP limits allocation. Hence, not considering MAC overhead appropriately results in inaccurate queue size estimation, thereby leading to inappropriate allocation of dynamic TXOP limits. In this article, an enhanced dynamic TXOP (EDTXOP) scheme is proposed that takes into account all the MAC overheads while estimating current queue size, thereby allocating appropriate dynamic TXOP limits within the pre-setting threshold values. In addition, the article presents an analytical estimation of the EDTXOP scheme to compute the dynamic TXOP limits for the current high priority traffic queues. Simulation results were carried out by varying traffic load in terms of packet size and packet arrival rate. The results show that the proposed EDTXOP scheme achieves the overall performance gains in the range of 4.41%-8.16%, 8.72%-11.15%, 14.43%-32% and 26.21%-50.85% for throughput, PDR, average ETE delay and average jitter, respectively when compared to the existing work. Hence, offering a better TXOP limit allocation solution than the rest.
High-dimensionality is one of the major problems which affect the quality of the quantitative structure-activity relationship (QSAR) modelling. Obtaining a reliable QSAR model with few descriptors is an essential procedure in chemometrics. The binary grasshopper optimization algorithm (BGOA) is a new meta-heuristic optimization algorithm, which has been used successfully to perform feature selection. In this paper, four new transfer functions were adapted to improve the exploration and exploitation capability of the BGOA in QSAR modelling of influenza A viruses (H1N1). The QSAR model with these new quadratic transfer functions was internally and externally validated based on MSEtrain, Y-randomization test, MSEtest, and the applicability domain (AD). The validation results indicate that the model is robust and not due to chance correlation. In addition, the results indicate that the descriptor selection and prediction performance of the QSAR model for training dataset outperform the other S-shaped and V-shaped transfer functions. QSAR model using quadratic transfer function shows the lowest MSEtrain. For the test dataset, proposed QSAR model shows lower value of MSEtest compared with the other methods, indicating its higher predictive ability. In conclusion, the results reveal that the proposed QSAR model is an efficient approach for modelling high-dimensional QSAR models and it is useful for the estimation of IC50 values of neuraminidase inhibitors that have not been experimentally tested.