MyMedR

Displaying publications 1861 - 1880 of 10540 in total

Abstract:

Sort:

Upcycling of food waste generated from the fresh market by utilising black soldier fly larvae: Influence on growth, bioconversion, and nutritional composition

Taufek NM, Mohamad Zulkifli NFN, Hamizah AN

J Environ Manage, 2024 Jan 01;349:119467.
PMID: 37976636 DOI: 10.1016/j.jenvman.2023.119467

Innovative solutions are needed to limit environmental effect and optimise resource use as food waste generation rises worldwide. This study investigates the potential of upcycling food waste from fresh markets using Black Soldier Fly (Hermetia illucens) larvae (BSFL) as a sustainable approach. This study explored four fresh market food waste substrates for BSFL bioconversion: discarded fish waste (FI), slaughtered chicken waste (CHI), vegetable waste (VEG), and a 1:1:1 combination of all three (MIX). Soybean curd residue (SCR) was treated as the control substrate. The effects on larval growth, nutritional content, and waste bioconversion rates were examined. The larvae growth rate was strongly impacted by waste type, with BSF-fed CHI and MIX gaining 18.0 and 16.7 mg/d, respectively, followed by BSF-fed with SCR (12.2 mg/d), FI (8.9 mg/d) and VEG (7.6 mg/d). The waste type did not substantially alter BSFL length. The survival rate of the BSFL fed with the food waste studied ranges from 95 to 98.47%, with SCR being the highest. Our findings indicated that BSFL can effectively convert a variety of fresh market food waste into valuable biomass. CHI waste produced the highest larval biomass and bioconversion rate followed by MIX, SCR, FI and VEG. The different waste stream has a major influence on BSFL biomass nutrition. BSFL nutritional composition is independent of the substrate's nutritional content, indicating no direct correlation between substrate and BSFL biomass nutritional composition. SCR waste produced the highest protein content of BSFL (50.49%), followed by VEG (32.61%), MIX (32.57%), FI (31.03%) and CHI (29.06%). SCR waste also produced BSFL biomass with lowest lipid content (26.55%) compared to other waste which resulted into BSFL with lipid levels ranging from 42.92% to 53.72%. BSFL-fed with SCR is the most suitable to be used as an alternative animal's feed based on the protein and lipid levels, while defatting procedure is necessary for the other waste-fed BSFL to render it suitability as animal feed alternatives. Based on bioconversion rate, BSFL growth, and lipid content, the MIX and CHI waste might be viable substrates for future research.

Matched MeSH terms: Larva/chemistry
Fulltext Evaluation of push-out bond strength, dentinal tubule penetration and adhesive pattern of bio-ceramic and epoxy resin-based root canal sealers

Karobari MI, Batul R, Snigdha NTS, Al-Rawas M, Noorani TY

PLoS One, 2023;18(11):e0294076.
PMID: 37956149 DOI: 10.1371/journal.pone.0294076

INTRODUCTION: Root canal sealing materials play a crucial role in an endodontic procedure by forming a bond between the dentinal walls and the gutta-percha. The current study aims to analyse the dentinal tubule penetration and adhesive pattern, including the push-out bond strength of six commercially available root canal sealers.
METHODOLOGY: Eighty-four mandibular first premolars were split into seven groups (and n = 12), Group 1: Dia-Root, Group 2: One-Fil, Group 3: BioRoot RCS, Group 4: AH Plus, Group 5: CeraSeal, Group 6: iRoot SP, Group 7: GP without sealer (control). Two groups were made, one for dentinal tubule penetration and the other for push-out bond strength; the total sample size was one hundred sixty-eight. Root canal treatment was performed using a method called the crown down technique, and for obturation, the single cone technique was used. A confocal laser scanning microscope (Leica, Microsystem Heidel GmbH, Version 2.00 build 0585, Germany) was used to evaluate dentinal tubule penetration, and Universal Testing Machine was utilised to measure the push-out bond strength (Shimadzu, Japan) using a plunger size of 0.4 mm and speed of 1mm/min. Finally, the adhesive pattern of the sealers was analysed by HIROX digital microscope (KH-7700). Statistical analysis was carried out by a one-way Anova test, Dunnet's T3 test, and Chi-square test.
RESULTS: Highest dentinal tubule penetration was noticed with One-Fil (p<0.05), followed by iRoot SP, CeraSeal, AH Plus, Dia-Root also, the most negligible value was recorded for BioRoot RCS. Meanwhile, BioRoot RCS (p<0.05) demonstrated the greater value of mean push-out bond strength, followed by One-fil, iRoot SP, CeraSeal, AH Plus and Dia-Root. Regarding adhesive pattern, most of the samples were classified as type 3 and type 4 which implies greater sealing ability and better adherence to the dentinal wall. However, BioRoot RCS revealed the most type 4 (p<0.05), followed by AH Plus, One-Fil, CeraSeal and Dia-Root.
CONCLUSION: The highest dentinal tubule penetration was shown by One-Fil compared to other groups. Meanwhile, BioRoot RCS had greater push-out bond strength and more adhesive pattern than other tested materials.

Matched MeSH terms: Gutta-Percha/chemistry
Fulltext Probing the molecular interactions between cholinium-based ionic liquids and insulin aspart: A combined computational and experimental study

Sundaram V, Ramanan RN, Selvaraj M, Ahemad N, Vijayaraghavan R, MacFarlane DR, et al.

Int J Biol Macromol, 2023 Dec 31;253(Pt 3):126665.
PMID: 37689282 DOI: 10.1016/j.ijbiomac.2023.126665

Despite extensive studies revealing the potential of cholinium-based ionic liquids (ILs) in protein stabilization, the nature of interaction between ILs' constituents and protein residues is not well understood. In this work, we used a combined computational and experimental approach to investigate the structural stability of a peptide hormone, insulin aspart (IA), in ILs containing a choline cation [Ch]+ and either dihydrogen phosphate ([Dhp]-) or acetate ([Ace]-) as anions. Although IA remained stable in both 1 M [Ch][Dhp] and 1 M [Ch][Ace], [Dhp]- exhibited a much stronger stabilization effect than [Ace]-. Both the hydrophilic ILs intensely hydrated IA and increased the number of water molecules in IA's solvation shell. Undeterred by the increased number of water molecules, the native state of IA's hydrophobic core was maintained in the presence of ILs. Importantly, our results reveal the importance of IL concentration in the medium which was critical to maintain a steady population of ions in the microenvironment of IA and to counteract the denaturing effect of water molecules. Through molecular docking, we confirm that the anions exert the dominant effect on the structure of IA, while [Ch]+ have the secondary influence. The computational results were validated using spectroscopic analyses (ultra-violet, fluorescence, and circular dichroism) along with dynamic light scattering measurements. The extended stability of IA at 30 °C for 28 days in 1 M [Ch][Dhp] and [Ch][Ace] demonstrated in this study reveals the possibility of stabilizing IA using cholinium-based ILs.

Matched MeSH terms: Water/chemistry
A Review of the Ethnomedicinal, Phytochemical, and Anticancer Properties of Melicope Species

Adewale Ahmed I, Hossain MS, Pei Cee L, Hisam Zamakshsharia N

Chem Biodivers, 2023 Dec;20(12):e202300952.
PMID: 37994297 DOI: 10.1002/cbdv.202300952

The genus Melicope, which consists of 230 species, stands out as the largest genus within the Rutaceae family. Melicope species are characterized by their evergreen nature and can range from shrubs to predominantly dioecious trees. The Melicope species have been utilized in traditional medicine to address a wide range of ailments, including fever, colds, cramps, and inflammation. These plants have gained significant attention due to their noteworthy ethnopharmacological and ethnomedicinal significance. Researchers have isolated numerous biologically active secondary metabolites from different Melicope species, which include polymethoxylated flavonoids, furanocoumarins, acetophenones, benzenoids, and quinolone alkaloids. These compounds exhibit diverse biological activities, such as antibacterial, antidiabetic, antifungal, and antiproliferative properties against human cancer cell lines. This review provides an update on the chemical constituents of the selected species of Melicope. The study also highlights the anticancer and cytotoxicity properties of the plant extracts and phytochemical constituents from Melicope species. Furthermore, the molecular mechanisms underlying the anticancer effects are elucidated. Overall, this review contributes to understanding the significant pharmacological potential of Melicope species and unlocking their chemical composition, emphasizing their relevance in the development of therapeutic agents, particularly in the field of cancer research.

Matched MeSH terms: Phytochemicals/chemistry
A review of zeolitic imidazolate frameworks (ZIFs) as electrochemical sensors for important small biomolecules in human body fluids

Feng Z, Lim HN, Ibrahim I, Gowthaman NSK

J Mater Chem B, 2023 Oct 06;11(38):9099-9127.
PMID: 37650588 DOI: 10.1039/d3tb01221b

Small biomolecules play a critical role in the fundamental processes that sustain life and are essential for the proper functioning of the human body. The detection of small biomolecules has garnered significant interest in various fields, including disease diagnosis and medicine. Electrochemical techniques are commonly employed in the detection of critical biomolecules through the principle of redox reactions. It is also a very convenient, cheap, simple, fast, and accurate measurement method in analytical chemistry. Zeolitic imidazolate frameworks (ZIFs) are a unique type of metal-organic framework (MOF) composed of porous crystals with extended three-dimensional structures. These frameworks are made up of metal ions and imidazolate linkers, which form a highly porous and stable structure. In addition to their many advantages in other applications, ZIFs have emerged as promising candidates for electrochemical sensors. Their large surface area, pore diameter, and stability make them ideal for use in sensing applications, particularly in the detection of small molecules and ions. This review summarizes the critical role of small biomolecules in the human body, the standard features of electrochemical analysis, and the utilization of various types of ZIF materials (including carbon composites, metal-based composites, ZIF polymer materials, and ZIF-derived materials) for the detection of important small biomolecules in human body fluids. Lastly, we provide an overview of the current status, challenges, and future outlook for research on ZIF materials.

Matched MeSH terms: Imidazoles/chemistry
Review on demulsification techniques for oil/water emulsion: Comparison of recyclable and irretrievable approaches

Low JY, Khe CS, Usman F, Hassan YM, Lai CW, You KY, et al.

Environ Res, 2024 Feb 15;243:117840.
PMID: 38081342 DOI: 10.1016/j.envres.2023.117840

Since the establishment of the first global refinery in 1856, crude oil has remained one of the most lucrative natural resources worldwide. However, during the extraction process from reservoirs, crude oil gets contaminated with sediments, water, and other impurities. The presence of pressure, shear forces, and surface-active compounds in crude oil leads to the formation of unwanted oil/water emulsions. These emulsions can take the form of water-in-oil (W/O) emulsions, where water droplets disperse continuously in crude oil, or oil-in-water (O/W) emulsions, where crude oil droplets are suspended in water. To prevent the spread of water and inorganic salts, these emulsions need to be treated and eliminated. In existing literature, different demulsification procedures have shown varying outcomes in effectively treating oil/water emulsions. The observed discrepancies have been attributed to various factors such as temperature, salinity, pH, droplet size, and emulsifier concentrations. It is crucial to identify the most effective demulsification approach for oil/water separation while adhering to environmental regulations and minimizing costs for the petroleum sector. Therefore, this study aims to explore and review recent advancements in two popular demulsification techniques: chemical demulsification and magnetic nanoparticles-based (MNP) demulsification. The advantages and disadvantages of each technique are assessed, with the magnetic approach emerging as the most promising due to its desirable efficiency and compliance with environmental and economic concerns. The findings of this report are expected to have a significant impact on the overall process of separating oil and water, benefiting the oil and gas industry, as well as other relevant sectors in achieving the circular economy.

Matched MeSH terms: Emulsions/chemistry
Development of chemometric-assisted supercritical fluid extraction of effective and natural tyrosinase inhibitor from Syzygium aqueum leaves

Zarudin NH, Normaya E, Shamsuri SS, Iqbal A, Mat Piah MB, Abdullah Z, et al.

Int J Biol Macromol, 2024 Feb;258(Pt 2):129168.
PMID: 38171432 DOI: 10.1016/j.ijbiomac.2023.129168

Tyrosinase is a key enzyme in enzymatic browning, causing quality losses in food through the oxidation process. Thus, the discovery of an effective and natural tyrosinase inhibitor via green technology is of great interest to the global food market due to food security and climate change issues. In this study, Syzygium aqueum (S. aqueum) leaves, which are known to be rich in phenolic compounds (PC), were chosen as a natural source of tyrosinase inhibitor, and the effect of the sustainable, supercritical fluid extraction (SFE) process was evaluated. Response surface methodology-assisted supercritical fluid extraction (RSM-assisted SFE) was utilized to optimize the PCs extracted from S. aqueum. The highest amount of PC was obtained at the optimum conditions (55 °C, 3350 psi, and 70 min). The IC50 (661.815 μg/mL) of the optimized extract was evaluated, and its antioxidant activity (96.8 %) was determined. Gas chromatography-mass spectrometry (GC-MS) results reveal that 2',6'-dihydroxy-4'-methoxychalcone (2,6-D4MC) (82.65 %) was the major PC in S. aqueum. Chemometric analysis indicated that 2,6-D4MC has similar chemical properties to the tyrosinase inhibitor control (kaempferol). The toxicity and physiochemical properties of the novel 2,6-D4MC from S. aqueum revealed that the 2,6-D4MC is safer than kaempferol as predicted via absorption, distribution, metabolism, and excretion (ADME) evaluation. Enzyme kinetic analysis shows that the type of inhibition of the optimized extract is non-competitive inhibition with Km = 1.55 mM and Vmax = 0.017 μM/s. High-performance liquid chromatography (HPLC) analysis shows the effectiveness of S. aqueum as a tyrosinase inhibitor. The mechanistic insight of the tyrosinase inhibition using 2,6-D4MC was successfully calculated using density functional theory (DFT) and molecular docking approaches. The findings could have a significant impact on food security development by devising a sustainable and effective tyrosinase inhibitor from waste by-products that is aligned with the United Nation's SDG 2, zero hunger.

Matched MeSH terms: Plant Extracts/chemistry
Enhancing cationic dye removal via biocomposite formation between chitosan and food grade algae: Optimization of algae loading and adsorption parameters

Agha HM, Abdulhameed AS, Jawad AH, Aazmi S, Sidik NJ, De Luna Y, et al.

Int J Biol Macromol, 2024 Feb;258(Pt 1):128792.
PMID: 38110162 DOI: 10.1016/j.ijbiomac.2023.128792

Herein, a natural material including chitosan (CTS) and algae (food-grade algae, FGA) was exploited to attain a bio-adsorbent (CTS/FGA) for enhanced methyl violet 2B dye removal. A study of the FGA loading into CTS matrix showed that the best mixing ratio between CTS and FGA to be used for the MV 2B removal was 50 %:50 % (CTS/FGA; 50:50 w/w). The present study employed the Box-Behnken design (RSM-BBD) to investigate the impact of three processing factors, namely CTS/FGA-(50:50) dose (0.02-0.1 g/100 mL), pH of solution (4-10), and contact time (5-15 min) on the decolorization rate of MV 2B dye. The results obtained from the equilibrium and kinetic experiments indicate that the adsorption of MV 2B dye on CTS/FGA-(50:50) follows the Langmuir and pseudo-second-order models, respectively. The CTS/FGA exhibits an adsorption capacity of 179.8 mg/g. The characterization of CTS/FGA-(50:50) involves the proposed mechanism of MV 2B adsorption, which primarily encompasses various interactions such as electrostatic forces, n-π stacking, and H-bonding. The present study demonstrates that CTS/FGA-(50:50) synthesized material exhibits a distinctive structure and excellent adsorption properties, thereby providing a viable option for the elimination of toxic cationic dyes from polluted water.

Matched MeSH terms: Coloring Agents/chemistry
Analysis of surface water area dynamics and driving forces in the Bosten Lake basin based on GEE and SEM for the period 2000 to 2021

Li X, Zhang F, Shi J, Chan NW, Cai Y, Cheng C, et al.

Environ Sci Pollut Res Int, 2024 Feb;31(6):9333-9346.
PMID: 38191729 DOI: 10.1007/s11356-023-31702-2

As an inland dryland lake basin, the rivers and lakes within the Lake Bosten basin provide scarce but valuable water resources for a fragile environment and play a vital role in the development and sustainability of the local societies. Based on the Google Earth Engine (GEE) platform, combined with the geographic information system (GIS) and remote sensing (RS) technology, we used the index WI2019 to extract and analyze the water body area changes of the Bosten Lake basin from 2000 to 2021 when the threshold value is -0.25 and the slope mask is 8°. The driving factors of water body area changes were also analyzed using the partial least squares-structural equation model (PLS-SEM). The result shows that in the last 20 years, the area of water bodies in the Bosten Lake basin generally fluctuated during the dry, wet, and permanent seasons, with a decreasing trend from 2000 to 2015 and an increasing trend between 2015 and 2019 followed by a steadily decreasing trend afterward. The main driver of the change in wet season water bodies in the Bosten Lake basin is the climatic factors, with anthropogenic factors having a greater influence on the water body area of dry season and permanent season than that of wet season. Our study achieved an accurate and convenient extraction of water body area and drivers, providing up-to-date information to fully understand the spatial and temporal variation of surface water body area and its drivers in the basin, which can be used to effectively manage water resources.

Matched MeSH terms: Rivers/chemistry
Fulltext Proximate composition, lipid and elemental profiling of eight varieties of avocado (Persea americana)

Nasri C, Halabi Y, Hajib A, Choukri H, Harhar H, Lee LH, et al.

Sci Rep, 2023 Dec 20;13(1):22767.
PMID: 38123687 DOI: 10.1038/s41598-023-50119-y

Eight Moroccan avocado varieties were analyzed for their nutritional composition and physicochemical properties. The nutritional contents of the sample were determined through the evaluation of the moisture, oil, ash, protein, and carbohydrate contents, and energy value calculation. Additionally, macroelements (Ca, Mg, and Na) and microelements (Fe, Zn, Cu, and Mn) were determined in the mineral profile. Oils were examined also for their fatty acid, phytosterol, and tocopherol profiles. As a result of the study, the avocado presents significant differences between the eight studied varieties (p

Matched MeSH terms: Fatty Acids/chemistry
Exploring diverse frontiers: Advancements of bioactive 4-aminoquinoline-based molecular hybrids in targeted therapeutics and beyond

Ravindar L, Hasbullah SA, Rakesh KP, Raheem S, Agustar HK, Ismail N, et al.

Eur J Med Chem, 2024 Jan 15;264:116043.
PMID: 38118392 DOI: 10.1016/j.ejmech.2023.116043

Amongst heterocyclic compounds, quinoline and its derivatives are advantaged scaffolds that appear as a significant assembly motif for developing new drug entities. Aminoquinoline moiety has gained significant attention among researchers in the 21stcentury. Considering the biological and pharmaceutical importance of aminoquinoline derivatives, herein, we review the recent developments (since 2019) in various biological activities of the 4-aminoquinoline scaffold hybridized with diverse heterocyclic moieties such as quinoline, pyridine, pyrimidine, triazine, dioxine, piperazine, pyrazoline, piperidine, imidazole, indole, oxadiazole, carbazole, dioxole, thiazole, benzothiazole, pyrazole, phthalimide, adamantane, benzochromene, and pyridinone. Moreover, by gaining knowledge about SARs, structural insights, and molecular targets, this review may help medicinal chemists design cost-effective, selective, safe, and more potent 4-aminoquinoline hybrids for diverse biological activities.

Matched MeSH terms: Aminoquinolines/chemistry
Fulltext Nutritional and Health Benefits of the Brown Seaweed Himanthalia elongata

Ilyas Z, Ali Redha A, Wu YS, Ozeer FZ, Aluko RE

Plant Foods Hum Nutr, 2023 Jun;78(2):233-242.
PMID: 36947371 DOI: 10.1007/s11130-023-01056-8

Himanthalia elongata is a brown seaweed containing several nutritional compounds and bioactive substances including antioxidants, dietary fibre, vitamins, fatty acids, amino acids, and macro- and trace- elements. A variety of bioactive compounds including phlorotannins, flavonoids, dietary fucoxanthin, hydroxybenzoic acid, hydroxycinnamic acid, polyphenols and carotenoids are also present in this seaweed. Multiple comparative studies were carried out between different seaweed species, wherein H. elongata was determined to exhibit high antioxidant capacity, total phenolic content, fucose content and potassium concentrations compared to other species. H. elongata extracts have also shown promising anti-hyperglycaemic and neuroprotective activities. H. elongata is being studied for its potential industrial food applications. In new meat product formulations, it lowered sodium content, improved phytochemical and fiber content in beef patties, improved properties of meat gel/emulsion systems, firmer and tougher with improved water and fat binding properties. This narrative review provides a comprehensive overview of the nutritional composition, bioactive properties, and food applications of H. elongata.

Matched MeSH terms: Antioxidants/chemistry
Fulltext Column-based removal of high concentration microplastics in synthetic wastewater using granular activated carbon

Amirah Mohd Napi NN, Ibrahim N, Adli Hanif M, Hasan M, Dahalan FA, Syafiuddin A, et al.

Bioengineered, 2023 Dec;14(1):2276391.
PMID: 37942779 DOI: 10.1080/21655979.2023.2276391

Microplastic (MP) is an emerging contaminant of concern due to its abundance in the environment. Wastewater treatment plant (WWTP) can be considered as one of the main sources of microplastics in freshwater due to its inefficiency in the complete removal of small MPs. In this study, a column-based MP removal which could serve as a tertiary treatment in WWTPs is evaluated using granular activated carbon (GAC) as adsorbent/filter media, eliminating clogging problems commonly caused by powder form activated carbon (PAC). The GAC is characterized via N2 adsorption-desorption isotherm, field emission scanning electron microscopy, and contact angle measurement to determine the influence of its properties on MP removal efficiency. MPs (40-48 μm) removal up to 95.5% was observed with 0.2 g/L MP, which is the lowest concentration tested in this work, but still higher than commonly used MP concentration in other studies. The performance is reduced with further increase in MP concentration (up to 1.0 g/L), but increasing the GAC bed length from 7.5 to 17.5 cm could lead to better removal efficiencies. MP particles are immobilized by the GAC predominantly by filtration process by being entangled with small GAC particles/chips or stuck between the GAC particles. MPs are insignificantly removed by adsorption process through entrapment in GAC porous structure or attachment onto the GAC surface.

Matched MeSH terms: Charcoal/chemistry
Functional polysaccharides of fucoidan, laminaran and alginate from Malaysian brown seaweeds (Sargassum polycystum, Turbinaria ornata and Padina boryana)

Mohd Fauziee NA, Chang LS, Wan Mustapha WA, Md Nor AR, Lim SJ

Int J Biol Macromol, 2021 Jan 15;167:1135-1145.
PMID: 33188815 DOI: 10.1016/j.ijbiomac.2020.11.067

Brown seaweeds are rich source of functional polysaccharides that exhibit various bioactivities. However, Malaysian seaweeds are under-utilised, leading to low revenue throughout the supply chain of the seaweed industry. The aims of this study were to extract the functional polysaccharides, namely fucoidan (F), laminaran (L) and alginate (A) from Malaysian brown seaweeds (Sargassum polycystum, Turbinaria ornata and Padina boryana) and subsequently evaluate the properties of the extracted polysaccharides. P. boryana recorded the significantly (p ≤ 0.05) highest carbohydrate content (74.78 ± 1.63%) with highest fucoidan yield (Fpad = 1.59 ± 0.16%) while T. ornata contained significantly (p ≤ 0.05) highest alginate yield (Atur = 105.19 ± 3.45%). Water activities of these extracted polysaccharides varied from 0.63-0.71 with average score of browning indexes (~40). Fourier transform infrared (FTIR) spectroscopy analysis demonstrated that the extracted polysaccharides exhibited similar spectral pattern of spectra with the respective standards. Meanwhile, laminaran extracts showed the significantly highest (p ≤ 0.05) total phenolic contents (Lsar = 43.29 ± 0.43 mgGAE/g) and superoxide anion scavenging activity (Lsig = 21.7 ± 3.6%). On the other hand, the significantly highest (p ≤ 0.05) DPPH scavenging activity was recorded in alginate with Asar at 85.3 ± 0.8%. These findings reported the properties and bioactivities of natural polysaccharides from Malaysian brown seaweeds that revealed the potential to develop high-value functional ingredients from Malaysian brown seaweeds.

Matched MeSH terms: Alginates/chemistry*; Antioxidants/chemistry; Glucans/chemistry*; Phenols/chemistry; Polysaccharides/chemistry*; Seaweed/chemistry*; Sargassum/chemistry*
Electrospun microcrystalline cellulose/chitosan porous composite nanofibrous membranes modified by non-thermal plasma for gaseous formaldehyde adsorption

Xiong J, Luo R, Jia Z, Ge S, Lam SS, Xie L, et al.

Int J Biol Macromol, 2024 Jan;256(Pt 2):128399.
PMID: 38007014 DOI: 10.1016/j.ijbiomac.2023.128399

To develop a green and facile adsorbent for removing indoor polluted formaldehyde (HCHO) gas, the biomass porous nanofibrous membranes (BPNMs) derived from microcrystalline cellulose/chitosan were fabricated by electrospinning. The enhanced chemical adsorption sites with diverse oxygen (O) and nitrogen (N)-containing functional groups were introduced on the surface of BPNMs by non-thermal plasma modification under carbon dioxide (CO2) and nitrogen (N2) atmospheres. The average nanofiber diameters of nanofibrous membranes and their nanomechanical elastic modulus and hardness values decreased from 341 nm to 175-317 nm and from 2.00 GPa and 0.25 GPa to 1.70 GPa and 0.21 GPa, respectively, after plasma activation. The plasma-activated nanofibers showed superior hydrophilicity (WCA = 0°) and higher crystallinity than that of the control. The optimal HCHO adsorption capacity (134.16 mg g-1) of BPNMs was achieved under a N2 atmosphere at a plasma power of 30 W and for 3 min, which was 62.42 % higher compared with the control. Pyrrolic N, pyridinic N, CO and O-C=O were the most significant O and N-containing functional groups for the improved chemical adsorption of the BPNMs. The adsorption mechanism involved a synergistic combination of physical and chemical adsorption. This study provides a novel strategy that combines clean plasma activation with electrospinning to efficiently remove gaseous HCHO.

Matched MeSH terms: Formaldehyde/chemistry
Chitosan-casein blended with condensed tannin and carnauba wax for the fabrication of antibacterial and antioxidant food packing films

Xu X, Deng S, Essawy H, Lee SH, Lum WC, Zhou X, et al.

Int J Biol Macromol, 2024 Oct;277(Pt 1):133784.
PMID: 39084972 DOI: 10.1016/j.ijbiomac.2024.133784

In this study, various chitosan-based films such as chitosan (C), chitosan-condensed tannin (CT), chitosan-casein (CC), and chitosan-casein-condensed tannin (CCT) films were prepared for the purpose of food packaging. In order to improve the hydrophobicity of these films, carnauba wax was blended into CCT to produce CCTW film. Properties such as morphology, UV resistance, water solubility, barrier performance, tensile strength, antioxidant, antibacterial and its performance as food packaging were evaluated. Compared with other chitosan-based films, CCTW films exhibited higher UV resistance, tensile strength, thermal stability and hydrophobicity. The addition of both condensed tannin and carnauba wax has significantly decreased the water vapor and oxygen permeability of the CCTW films. The CCTW films were proved capable of repelling most daily consuming liquids. Besides, CCTW films displayed outstanding free radical scavenging rate and antibacterial properties. Meanwhile, bananas wrapped with CCTW films remained fresh for seven days without any mold growth and outperformed other types of films. Apart from that, the CCTW films also showed biodegradable characteristics after exposure to Penicillium sp. These distinguished characteristics made the CCTW films a promising packaging material for long-term food storage.

Matched MeSH terms: Tannins/chemistry
Phytosociology and ecological framework of forest tree species in the Toormang Valley, Dir Lower, Hindu Kush Range, Pakistan

Hameed T, Ahmad I, Ullah S, Subramaniyan V, Ali I, Hussain H, et al.

Braz J Biol, 2024;84:e282479.
PMID: 39230079 DOI: 10.1590/1519-6984.282479

The phytosociological survey was conducted during 2018-2020. The research area was classified into five ecological zones based on habitat, physiognomy and species composition. Pc-Ord software was used for cluster analysis and four vegetation communities were established. The Quercus baloot-Quercus incana community is situated in Sair at an altitude of 1196 (mean ± SE) m altitude with a 14.1 ± 0 slope angle and contains eleven tree species. The Pinus wallichiana- Ailanthus altissima community had a relatively small number of tree species reported in Shakawlie at 1556 (mean ± SE) with a 17.5 ± 0 slope angle. The Pinus wallichiana- Quercus incana community is distributed in Wali Kandao and Mangi Kandao at altitudes of 2030.5 (mean ± SE) m and the slope angle was 19.2 ± 1.4. This community possesses a total of twenty-one tree species and is highly diverse. Similarly, the Populus alba - Platanus orientalis group was present in Banr Pate, with an altitude of 1613 (mean ± SE) m and a 16.3 slope angle. The principal component analysis (PCA) and non-metric multidimensional scaling (NMS) ordination methods were applied to study the relationships between ecological and soil variables with trees species. The NMS ordination of axis 1 was significantly correlated with Sand% (p<0.2), Nitrogen% (p<0.1) and Pb (mg/kg) (r= 0.876751, p<0.05), while the ordination of axis 2 was significantly correlated with Silt% (p<0.2), Sand% (p<0.2), Organic matter% (p<0.2), K (mg/kg) (r=0.882433, p<0.02), Fe (mg/kg)(r=0.614833, p<0.2), Ca (mg/kg) (r=0.721712, p< 0.2) and Zn (mg/kg) (r=0.609545, p<0.2). Similarly, the PCA ordination of axis 1 revealed that it was significantly correlated with phosphorus, calcium and slope angle, while that of axis 2 was significantly correlated with altitude, zinc and manganese.

Matched MeSH terms: Soil/chemistry
Catalytically active inclusion bodies as a potential tool for biotechnology

Bello MN, Sabri S, Mohd Yahaya N, Mohd Shariff F, Mohamad Ali MS

Biotechnol Appl Biochem, 2024 Dec;71(6):1235-1242.
PMID: 38863240 DOI: 10.1002/bab.2624

The initial assumption that viewed inclusion bodies as a hindrance to the efficient production of protein is no longer held due to the emergence of catalytically active inclusion bodies (CatIBs). Recent studies revealed their potential to be used in free form or immobilized as biocatalysts. The curiosity to acquire suitable catalysts has remained the measure of concern for researchers and industrialists. Numerous processes and production in various sectors of food industries, petroleum, pharmaceutical, cosmetics, and many others are still searching for a robust catalyst with outstanding features such as recyclability, resistance to pH, as well as temperature. CatIBs are forms of inclusion bodies that possess catalytic activity, which can improve catalysis efficiency, stability, and recyclability. One of the advantages of CatIBs is their potential to be used as catalysts for numerous bioprocesses when generated by an enzyme. These aggregates can efficiently be used as a replacement for traditional enzyme immobilization. This review tends to focus on the possibility of its application in various processes. The novelty of this review is that it considered the production of CatIBs both from artificial and natural perspectives, as well as how to improve it. Inclusion bodies' immobilization may provide an efficient alternative in the area of biocatalysis, and hence it will improve industrial sectors and substantially provide a means of achieving excellent performance in the near future.

Matched MeSH terms: Enzymes, Immobilized/chemistry
Tradeoffs among yield, cadmium bioavailability, nitrous oxide emission and bacterial community stability: Effects of iron-modified woody peat and nitrification inhibitors on soil-vegetable systems

Cao X, Hu X, Efrizal E, Hayati I, Yang J, Tan C, et al.

J Environ Manage, 2024 Dec;372:123379.
PMID: 39550941 DOI: 10.1016/j.jenvman.2024.123379

Cadmium (Cd) pollution leads to soil degradation, decreases crop yield and affects human health through the food chain. Iron-modified woody peat (IMP) is an organic passivation material that significantly affects the migration of heavy metals in soil. Nitrification inhibitors are widely used to reduce greenhouse gas emissions. This study investigated the effects of the IMP and nitrification inhibitors dicyandiamide (DCD) and 3, 4-dimethylpyrazole phosphate on Cd content and form, crop yield, nitrous oxide (N2O) emission and bacterial communities in soil-lettuce systems. The simultaneous additions of IMP and DCD substantially reduced the soil available Cd content by 22.6 % and significantly promoted the lettuce yield by 42.9 %. Lettuce yield was significantly and negatively correlated with soil available Cd (correlation coefficient = -0.52). The simultaneous applications of IMP and nitrification inhibitors stimulated N2O emission risk by enhancing the soil NH4+-N contents and the relative abundances of Firmicutes, which could also decrease soil bacterial community stabilities. Therefore, tradeoffs among yield, Cd bioavailability, N2O emission and bacterial community stability should be comprehensively considered when evaluating the combined performances of IMP and nitrification inhibitors.

Matched MeSH terms: Iron/chemistry
Review on Biodegradable Aliphatic Polyesters: Development and Challenges

Asri NA, Sezali NAA, Ong HL, Mohd Pisal MH, Lim YH, Fang J

Macromol Rapid Commun, 2024 Dec;45(23):e2400475.
PMID: 39445644 DOI: 10.1002/marc.202400475

Biodegradable polymers are gaining attention as alternatives to non-biodegradable plastics to address environmental issues. With the rising global demand for plastic products, the development of non-toxic, biodegradable plastics is a significant topic of research. Aliphatic polyester, the most common biodegradable polyester, is notable for its semi-crystalline structure and can be synthesized from fossil fuels, microbial fermentation, and plants. Due to great properties like being lightweight, biodegradable, biocompatible, and non-toxic, aliphatic polyesters are used in packaging, medical, agricultural, wearable devices, sensors, and textile applications. The biodegradation rate, crucial for biodegradable polymers, is discussed in this review as it is influenced by their structural properties and environmental conditions. This review discusses currently available biodegradable polyesters, their emerging applications, and the challenges in their commercialization. As research in this area grows, this review emphasizes the innovation in biodegradable aliphatic polyesters and their role in advancing environmental sustainability.

Matched MeSH terms: Biocompatible Materials/chemistry

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links