Content management is an organisational effort of managing content, particularly in digital format. Although it has been over 25 years since content management was introduced, this field of study is still considered an emerging topic with unresolved issues-in particular, the subject of benefit achievement. Therefore, grounded on an extensive review of 135 articles, the purpose of this study is to investigate the benefits that organisations can gain through the proper use of an Enterprise Content Management System (ECMS). Subsequently, this paper identifies a list of ECMS benefits and proposes an ECMS benefit framework for further exploration into this field. Our result shows that although ECMS does bring benefits to organisations, these benefits are diverse; indicating that there are certain determinants or factors influencing the achievement of such benefits. Moreover, it is also found that in the context of the benefit framework of Shang and Seddon [10], three categories were found relevant to the field of content management: operational benefit, managerial benefit, and strategic benefit.
In the last three centuries, medicine has focused predominantly on the physical body as the source of disease, placing very little importance on the mind. However, the significance of mind-body interactions in medicine is now increasingly being recognised. True health must include both the physical body and the mind. This article traces our concepts of the relationship between mind and body since primitive times and explores its relevance to the maintenance of health.
The estimation of biological age (BA) is an important asymptomatic measure that can be used to understand the physical changes and the aging process of a living being. Factors that contribute towards profiling the human biological age can be diverse. Therefore, this study focuses on developing a BA model for patients with Chronic Kidney Disease (CKD). The procedure commences with the selection of significant biomarkers using a correlation test. Appropriate weighting is then assigned to each selected biomarker using the indexing method to produce a BA index. The BA index is matched to the age variation within the sample to acquire additional terms for the chronological age leading ultimately to the estimated BA. From a sample of 190 patients (133 trained data and 57 testing data) obtained from the University of Malaya Medical Centre (UMMC), Malaysia, the intensity of the BA is found to be between three to nine years from the chronological age. Visual observations further validate the high similarities between the training and testing data sets.
This paper presents a novel, real-time defect detection system, based on a best-fit polynomial interpolation, that inspects the conditions of outer surfaces. The defect detection system is an enhanced feature extraction method that employs this technique to inspect the flatness, waviness, blob, and curvature faults of these surfaces. The proposed method has been performed, tested, and validated on numerous pipes and ceramic tiles. The results illustrate that the physical defects such as abnormal, popped-up blobs are recognized completely, and that flames, waviness, and curvature faults are detected simultaneously.
The urban transit network design problem (UTNDP) involves the development of a transit route set and associated schedules for an urban public transit system. The design of efficient public transit systems is widely considered as a viable option for the economic, social, and physical structure of an urban setting. This paper reviews four well-known population-based metaheuristics that have been employed and deemed potentially viable for tackling the UTNDP. The aim is to give a thorough review of the algorithms and identify the gaps for future research directions.
Intraoral theranostics, the integration of diagnostics and therapeutics within the oral cavity, is gaining significant traction. This pioneering approach primarily addresses issues like xerostomia (dry mouth), commonly resulting from cancer treatment, with a specific focus on monitoring temperature and humidity. This paper introduces the innovative Intra-Oral Portable Micro-Electronic (IOPM) fluidic theranostic device platform. It leverages conventional dental spoons by incorporating advanced sensors for precise measurements of oral temperature and humidity. Personalization options include a microfluidic chip and a tooth model, enabling targeted delivery of therapeutic agents to optimize treatment outcomes. The electronic control system simplifies the administration of fluid dosages, intelligently adjusted based on real-time oral cavity temperature and humidity readings. Rigorous experimental evaluations validate the platform's precision in delivering fluid volumes at predefined intervals. This platform represents a transformative advancement for individuals contending with oral health challenges such as xerostomia (dry mouth). Furthermore, it has the potential to elevate oral healthcare standards by providing advanced diagnostics and tailored therapeutic solutions, benefiting both patients and dental professionals alike.
We compared the patency and the suitability of arteriovenous fistula (AVF) created for vascular access by two approaches: (a) physical examination with preoperative vascular mapping and (b) physical examination alone.
The Josephson effect describes the generic appearance of a supercurrent in a weak link between two superconductors. Its exact physical nature deeply influences the properties of the supercurrent. In recent years, considerable efforts have focused on the coupling of superconductors to the surface states of a three-dimensional topological insulator. In such a material, an unconventional induced p-wave superconductivity should occur, with a doublet of topologically protected gapless Andreev bound states, whose energies vary 4π-periodically with the superconducting phase difference across the junction. In this article, we report the observation of an anomalous response to rf irradiation in a Josephson junction made of a HgTe weak link. The response is understood as due to a 4π-periodic contribution to the supercurrent, and its amplitude is compatible with the expected contribution of a gapless Andreev doublet. Our work opens the way to more elaborate experiments to investigate the induced superconductivity in a three-dimensional insulator.
Advances in reconfigurable liquid-based reconfigurable antennas are enabling new possibilities to fulfil the requirements of more advanced wireless communication systems. In this review, a comparative analysis of various state-of-the-art concepts and techniques for designing reconfigurable antennas using liquid is presented. First, the electrical properties of different liquids at room temperature commonly used in reconfigurable antennas are identified. This is followed by a discussion of various liquid actuation techniques in enabling high frequency reconfigurability. Next, the liquid-based reconfigurable antennas in literature used to achieve the different types of reconfiguration will be critically reviewed. These include frequency-, polarization-, radiation pattern-, and compound reconfigurability. The current concepts of liquid-based reconfigurable antennas can be classified broadly into three basic approaches: altering the physical (and electrical) dimensions of antennas using liquid; applying liquid-based sections as reactive loads; implementation of liquids as dielectric resonators. Each concept and their design approaches will be examined, outlining their benefits, limitations, and possible future improvements.
The early detection of damaged (partially broken) outdoor insulators in primary distribution systems is of paramount importance for continuous electricity supply and public safety. Unmanned aerial vehicles (UAVs) present a safer, autonomous, and efficient way to examine the power system components without closing the power distribution system. In this work, a novel dataset is designed by capturing real images using UAVs and manually generated images collected to overcome the data insufficiency problem. A deep Laplacian pyramid-based super-resolution network is implemented to reconstruct high-resolution training images. To improve the visibility of low-light images, a low-light image enhancement technique is used for the robust exposure correction of the training images. A different fine-tuning strategy is implemented for fine-tuning the object detection model to increase detection accuracy for the specific faulty insulators. Several flight path strategies are proposed to overcome the shuttering effect of insulators, along with providing a less complex and time- and energy-efficient approach for capturing a video stream of the power system components. The performance of different object detection models is presented for selecting the most suitable one for fine-tuning on the specific faulty insulator dataset. For the detection of damaged insulators, our proposed method achieved an F1-score of 0.81 and 0.77 on two different datasets and presents a simple and more efficient flight strategy. Our approach is based on real aerial inspection of in-service porcelain insulators by extensive evaluation of several video sequences showing robust fault recognition and diagnostic capabilities. Our approach is demonstrated on data acquired by a drone in Swat, Pakistan.
Most people with musculoskeletal problem suffer pain at multiple body sites. The most frequent form of multisite pain studied is chronic widespread pain (CWP). Focusing solely on CWP may exclude the commoner form of multisite pain which is less wide spread. Therefore, studies on multisite pain which do not consider the spatial distribution of pain can be beneficial to tackle the overall problem of musculoskeletal pain. Nevertheless, multisite pain has been defined differently in the studies among workers. The absence of uniformed definition will jeopardize the understanding of this musculoskeletal problem. A review was thus carried out to identify how multisite pain were defined, how they influenced the reported occurrence of multisite pain and whether the definition determined the physical work exposures assessed in previous studies among worker. A systematic review was initiated by the search of electronic databases for multisite pain. Articles were included and excluded based on the selection criteria. A final of nine full text articles were reviewed. It was found that the difference in the definitions lies mainly in the body sites considered and the pain characteristics. The characteristics of pain influenced the multisite pain prevalence more than the sites.It wasdifficult to conclude whether the definition used determined the physical work exposures since only five studies were involved and three of them had similar research team which may explained the usage of similar exposures. The findings from this review, however, could not be inferred due to the small number of studies involved.
Simulated/ standardized patients (SPs) have become one of the significant components in today’s medical education and students’ assessment. Some differences exist in the training method of SPs for psychiatry examinations compared to other medical disciplines. This brief report highlights the challenges encountered in the training process and methods to overcome those challenges. A wellstructured, intensive training remains as one of the most important factors in ensuring standardization of SPs for psychiatric examinations.
To describe a quick and simple diagnostic approach to monocular diplopia. Diplopia is a common visual complain in casualty departments, general practice clinics, neurologic clinics as well as ophthalmic clinics. Monocular diplopia, however, is uncommon. Many well established clinical examination methods are available to address diplopia. Some require special equipments which are not easily available or unfamiliar outside of ophthalmic clinic. We describe a simple two-minute diagnostic approach to monocular diplopia. Basic knowledge and understanding of simple clinical examination techniques enhances diagnostic skill and allow proper localization of underlying disorders.
This paper presents an experimental characterization of millimeter-wave (mm-wave) channels in the 6.5 GHz, 10.5 GHz, 15 GHz, 19 GHz, 28 GHz and 38 GHz frequency bands in an indoor corridor environment. More than 4,000 power delay profiles were measured across the bands using an omnidirectional transmitter antenna and a highly directional horn receiver antenna for both co- and cross-polarized antenna configurations. This paper develops a new path-loss model to account for the frequency attenuation with distance, which we term the frequency attenuation (FA) path-loss model and introduce a frequency-dependent attenuation factor. The large-scale path loss was characterized based on both new and well-known path-loss models. A general and less complex method is also proposed to estimate the cross-polarization discrimination (XPD) factor of close-in reference distance with the XPD (CIX) and ABG with the XPD (ABGX) path-loss models to avoid the computational complexity of minimum mean square error (MMSE) approach. Moreover, small-scale parameters such as root mean square (RMS) delay spread, mean excess (MN-EX) delay, dispersion factors and maximum excess (MAX-EX) delay parameters were used to characterize the multipath channel dispersion. Multiple statistical distributions for RMS delay spread were also investigated. The results show that our proposed models are simpler and more physically-based than other well-known models. The path-loss exponents for all studied models are smaller than that of the free-space model by values in the range of 0.1 to 1.4 for all measured frequencies. The RMS delay spread values varied between 0.2 ns and 13.8 ns, and the dispersion factor values were less than 1 for all measured frequencies. The exponential and Weibull probability distribution models best fit the RMS delay spread empirical distribution for all of the measured frequencies in all scenarios.
Knowledge of physical characteristics of Malaysian variety pomelo fruits are necessary for the design of some post harvesting, processing systems such as cleaning, handling, grading and packaging system. For proper development of pomelo grading systems, important relationships between the mass and some physical characteristics of pomelo fruits such as length, width, thickness, surface area, projected areas and volumes must be known. The aim of this research was to measure physical characteristics of two Malaysian varieties of pomelo fruit; Ledang (PO55) and Tambun (PO52) varieties. In this study, the mass of pomelo fruit was evaluated and correlated to measure physical characteristics using Linear, Quadratic, S-curve and Power models. The results showed that the correlation of the mass of pomelo fruit with all measured physical characteristics was significant at the 0.01 probability level. In the nutshell, mass modeling of pomelo fruit for Ledang (PO55) and Tambun (PO52) varieties based on the projected area are recommended according to economical view.
The present study sheds light on the physical and chemical characteristics of microcrystalline cellulose (MCC) isolated from oil palm fronds (OPF) pulps. It was found that the OPF MCC was identified as cellulose II polymorph, with higher crystallinity index than OPF α-cellulose (CrIOPFMCC: 71%>CrIOPFα-cellulose: 47%). This indicates that the acid hydrolysis allows the production of cellulose that is highly crystalline. BET surface area of OPF MCC was found to be higher than OPF α-cellulose (SBETOPFMCC: 5.64m(2)g(-1)>SBETOPFα-cellulose:Qa(0) 2.04m(2)g(-1)), which corroborates their potential as an adsorbent. In batch adsorption studies, it was observed that the experimental data fit well with Langmuir adsorption isotherm in comparison to Freundlich isotherm. The monolayer adsorption capacity (Qa(0)) of OPF MCC was found to be around 51.811mgg(-1) and the experimental data fitted well to pseudo-second-order kinetic model.
The aim of the research is to compare the physical profile between Malaysian women basketball players and netball players. The physical profile measures were height, body mass, and body fat. The subjects were divided into two groups based on their playing performance and positions. The playing performance consisted of elite/senior, junior, and reserve players. Meanwhile, the playing positions consisted of forward/attack, centre, and guard/defence. The percentage of body fat was determined by means of skinfold measurement at seven different locations. Results showed that there were significant differences in body fat percentage between basketball player and netball players (p < 0.01). The elite/senior basketball players were reported to have the lowest body fat percentage as compared to other basketball or netball players. While for the playing position, guard/defence position basketball players were reported to be the shortest and have the lowest body fat percentage as compared to other playing positions. In conclusion, Malaysian basketball players were found to have better physical or bodily advantaged in terms of playing contact sports as compared to the Malaysian netball players.