Displaying publications 1 - 20 of 402 in total

Abstract:
Sort:
  1. Caviedes-Bucheli J, Muñoz-Alvear HD, Lopez-Moncayo LF, Kacharaju KR, Velasquez-Rivera AC, Carlosama-Recalde LA, et al.
    Int Endod J, 2024 May;57(5):576-585.
    PMID: 38294105 DOI: 10.1111/iej.14035
    AIM: The purpose of this study was to quantify the effect of five different root canal preparation instruments on Substance P (SP), Calcitonin gene-related peptide (CGRP) and their receptors expression in healthy human periodontal ligament.

    METHODOLOGY: STROBE guidelines were used to design a study using 60 periodontal ligament samples obtained from healthy lower premolars where extraction was indicated for orthodontic reasons. Prior to extraction 40 of these premolars were equally divided into four groups and root canals were prepared using different systems: Mtwo, Reciproc Blue, HyFlex EDM and Plex-V. Ten premolars were prepared with hand files and served as a positive control group. The remaining 10 premolars where extracted without treatment and served as a negative control group. All periodontal ligament samples were processed to measure the expression of SP, CGRP and their receptors by radioimmunoassay. Kruskal-Wallis and Duncan tests were performed to determine statistically significant differences between the groups for each variable.

    RESULTS: Greater expression of all the peptides measured were found in the hand-file preparation group, followed by the Reciproc Blue, Mtwo, HyFlex EDM and Plex-V groups. The lower SP, CGRP and their receptors values were for the intact teeth control group. Kruskal-Wallis test showed statistically significant differences amongst groups (p 

    Matched MeSH terms: Equipment Design
  2. Abdul Halim NSS, Mohd Ripin Z, Law MJJ, Karunagaran J, Yusof MI, Shaharudin S, et al.
    Disabil Rehabil Assist Technol, 2024 May;19(4):1531-1538.
    PMID: 37162275 DOI: 10.1080/17483107.2023.2210619
    PURPOSE: Despite the proven benefits of motorized lifting devices in reducing the physical stresses experienced by nurses during patient transfers, the low adoption of these devices remains limited. The study aimed to assess the perceptions of nurses regarding the new motorized lifting device (NEAR-1) in terms of their perceived workload and usability during patient transfers.

    MATERIALS AND METHODS: A cross-sectional study was conducted to evaluate the perceptions of nurses (n = 45) and students (n = 6) when performing patient transfers from bed to wheelchair and vice versa using the NEAR-1 compared to an existing floor lift, walking belt, and manual transfer. Participants filled out surveys evaluating the perceived task demands and usability of the NEAR-1, as well as open-ended interviews.

    RESULTS: The use of the NEAR-1 significantly reduced the mean of all NASA-TLX constructs (p 

    Matched MeSH terms: Equipment Design
  3. Chang XL, Chee PS, Lim EH
    Sci Rep, 2023 Jun 15;13(1):9678.
    PMID: 37322083 DOI: 10.1038/s41598-023-36335-6
    This paper presents a 35.0 × 35.0 × 2.7 mm3 compact, low-profile, and lightweight wearable antenna for on-body wireless power transfer. The proposed antenna can be easily printed on a piece of flexible tattoo paper and transformed onto a PDMS substrate, making the entire antenna structure conform to the human body for achieving a better user experience. Here, a layer of frequency selective surface (FSS) is inserted in between the antenna and human tissue, which has successfully reduced the loading effects of the tissue, with 13.8 dB improvement on the antenna gain. Also, the operating frequency of the rectenna is not affected much by deformation. To maximize the RF-DC conversion efficiency, a matching loop, a matching stub, and two coupled lines are integrated with the antenna for tuning the rectenna so that a wide bandwidth (~ 24%) can be achieved without the use of any external matching networks. Measurement results show that the proposed rectenna can achieve a maximum conversion efficiency of 59.0% with an input power of 5.75 μW/cm2 and can even exceed 40% for a low input power of 1.0 μW/cm2 with a 20 kΩ resistive load, while many other reported rectennas can only achieve a high PCE at a high power density level, which is not always practical for a wearable antenna.
    Matched MeSH terms: Equipment Design
  4. Thomas AR, Reddy TVK, Tan JY, Qing SEJ, Qing CS, Xuan LY, et al.
    J Contemp Dent Pract, 2023 Apr 01;24(4):221-227.
    PMID: 37469260 DOI: 10.5005/jp-journals-10024-3471
    AIM: The purpose of this study was to evaluate and compare the canal transportation tendencies and centering ability of the TruNatomy shaper (TN) and XP-endo shaper (XPS) rotary systems in oval-shaped canals with moderate root curvature (15°-25°), using cone-beam computed tomography (CBCT) imaging.

    MATERIALS AND METHODS: Sixty single-rooted permanent human teeth were chosen after considering the inclusion and exclusion criteria. The teeth were divided into two groups (n = 30). The test group was instrumented with TN files and the other with XPS according to manufacturer's instructions. CBCT images were taken before and after instrumentation to record the root canal distances from mesial, distal, buccal, and lingual borders of the root at 3, 5, and 7 mm distances from the root apex using a specific formula. Statistical analysis was done using the Statistical Package for the Social Sciences software program, version 20.0. The data were analyzed using the unpaired t test.

    RESULTS: Both TN and XPS were safe for use in oval-shaped canals with moderate root curvature. However, the XPS showed higher buccolingual transportation as compared with TN at 3 mm from the apex and higher mesiodistal transportation at 3 and 5 mm levels from the apex as compared with TN.

    CONCLUSION: Canal transportation has been detected in both systems; however, the values obtained were within the safe range (<0.3 mm). Overall, no significant difference was observed between TN and XPS (p > 0.05) in their canal transportation tendencies and centering ability.

    CLINICAL SIGNIFICANCE: The study assesses the canal centering and transportation tendencies of the recently launched TN rotary system in extracted teeth with a combination of morphologies. The findings of the study are significant clinically as minimum transportation of the canal, minimal dentin removal, efficient disinfection, and three-dimensional obturation of the root canal are considered important factors in deciding the prognosis of endodontic therapy.

    Matched MeSH terms: Equipment Design
  5. Maqbool M, Tirmazi SSM, Shakoor A, Akram Z, Nazir R, Chohan AN, et al.
    Biomed Res Int, 2023;2023:1044541.
    PMID: 36845639 DOI: 10.1155/2023/1044541
    BACKGROUND: Despite of having improved endodontic file designs as well as the reinforced metal alloy file structure, intracanal endodontic file separation (EFS) is still a very problematic and worrisome dental incident, which usually occurs without any visible signs of permanent deformation. Further, there have been conflicting reports regarding the clinical significance of leaving separated files within root canals.

    AIMS: The aim of this study was to look into the current perceptions and awareness about file separation during endodontic treatment among the dental house officers (DHOs).

    MATERIALS AND METHODS: A novel validated questionnaire comprising of 15 close-ended questions was distributed anonymously via Google Forms through email to 1100 DHOs across Pakistan. The questionnaire consisted of two parts: the first component (Section I) collected demographic data and the second component (Section II) investigated the causes of EFS during root canal treatment. Following the completion of socioeconomic information, including age and gender, the DHOs were asked to answer a few questions about the various reasons for endodontic instrument fracture.

    RESULTS: A total of 800 responses were recorded, with an effective rate of 72.8%. The majority of the DHOs (p value < 0.001) perceived that endodontic instrument fracture occurred in the posterior (61.5%) and apical third of the canal (50.5%) and in older permanent dentition (67.3%), possibly due to patient anxiety (62%). Better choice of instrument (61.15%), operators' experience (95.3%), knowledge (87.5%), and proper root canal cleaning (91.1%) are believed to be the vital steps in reducing endodontic file separation/fracture. Furthermore, majority of them (p value < 0.001) perceived that stainless steel was a superior alloy for filing instruments. Manual files tend to be more prone to fractures due to repeated use than rotary files.

    CONCLUSION: This study demonstrated that young DHOs had adequate knowledge and awareness regarding the potential predisposing factors and handling techniques for EFS. This study thereby provides an evaluating tool to access the insights of the current perceptions and awareness of DHOs concerning EFS.

    Matched MeSH terms: Equipment Design
  6. Butt AD, Khan J, Ahmad S, Ghaffar A, Abdullah Al-Gburi AJ, Hussein M
    PLoS One, 2023;18(4):e0280042.
    PMID: 37053176 DOI: 10.1371/journal.pone.0280042
    Biomedical telemetry relies heavily on implantable antennas. Due to this, we have designed and tested a compact, a circularly polarized, a low-profile biomedical implantable antenna that operate in the 2.45 GHz ISM band. In order to keep the antenna compact, modified co-planar waveguide (CPW) technology is used. Slotted rectangular patch with one 45-degree angle slot and truncated little patch on the left end of the ground plane generate a frequency-range antenna with circular polarization. Using a 0.25-millimeter-thick Roger Duroid-RT5880 substrate with a thickness of εr = 2.2, tanδ = 0.0009 provides flexibility. The volume of the antenna is 21 mm x 13.5 mm x 0.254 mm (0.25λg × 0.16λg × 0.003λg). The antenna covers 2.35-2.55 GHz (200 MHz) in free space and 1.63-1.17 GHz (1.17 GHz) in epidermal tissue. With skin tissue that has more bandwidth, the (x and y)-axis bends of the antenna are also simulated via the simulation. Bended antenna simulations and measurements show excellent agreement. At 2.45 GHz, the skin-like gel had -10dB impedance and 3dB axial ratio (AR) bandwidths of 47.7 and 53.8%, respectively. The ultimate result is that the SAR values are 0.78 W/kg in skin over 1 g of bulk tissue, as determined by simulations. The suggested SAR values are lower than the FCC's maximum allowable limit (FCC). This antenna is small enough to be implanted in the body, making it perfect for biomedical applications.
    Matched MeSH terms: Equipment Design
  7. Rai NA, Abdul Aziz MJ, Sahid MR, Husain AR, Anjum W, Low WY
    PLoS One, 2023;18(10):e0291873.
    PMID: 37847692 DOI: 10.1371/journal.pone.0291873
    This paper proposes an average current mode controller (ACMC) for a single-phase bridgeless power factor correction (PFC) circuit using a single ended primary inductor converter (SEPIC) via second-order model reduction. The superiority of the proposed controller is PFC accomplished at power up to 350 W with high efficiency via the second-order model reduction. The design and implementation of ACMC on the converter operated with continuous conduction mode (CCM) is explained in detail. ACMC forces input current to follow sinusoidal current reference at different power levels and sustain high power factor (PF). The proposed controller is designed based on the theoretical analysis operation of the circuit. For verification, MATLAB/Simulink simulations are carried out and validation through an experiment test rig for 110-220 Vrms input, 100 Vdc/ 350 W output prototype at 20 kHz switching frequency. It is proven that the proposed controller strategy accomplishes high PF, high efficiency and conformity with the simulation.
    Matched MeSH terms: Equipment Design
  8. Khairul Hasni NA, Ismail R, Muhamad Robat R, Mohamad N, Suib FA, Pahrol MA, et al.
    PLoS One, 2023;18(11):e0288105.
    PMID: 38019763 DOI: 10.1371/journal.pone.0288105
    This study examined the association of various brands of NIOSH-certified N95 filtering face-piece respirators (FFR) fit with facial dimensions and gender. One hundred and thirty-five participants (77 females and 58 males) were recruited from the previous facial anthropometry study among Malaysians in 2020. Quantitative respirator fit testing of six FFR were performed using the TSI Portacount Pro+ 8038 which comprised of four exercises (bending over, talking, up-down head movement, and side to side head movement). An overall fit factor (FF) of ≥ 100 was considered a pass for each FFR. Analysis was done using T-test, Pearson's correlations, and generalised linear regression. The passing rates for the six FFR were 36.3% (Cup B), 50.4% (Trifold A), 54.1% (Duckbill A), 57.0% (Cup A), 74.1% (Trifold B), and 83.7% (Duckbill B). Both Duckbill B and Trifold B had the highest passing rates for both genders. However, certain FFR models (Cup B, Trifold A, Trifold B, and Duckbill A) fit better for participants with large facial size who were mostly males, while others (Cup A and Duckbill B) specifically fit better for those with small facial size, who were mostly females. This study showed significant positive effect of nose protrusion, nasal root and subnasale-sellion and the negative effect of menton-sellion, bigonial breadth and nose breadth on fit factors of various FFR. The results of this study emphasized the importance of choosing and designing FFR based on local anthropometry data, with careful consideration on the dimensions that affect the respirator fit. Since N95 are commonly used in the healthcare settings to prevent airborne transmission, the practice of respirator fit testing and selecting N95 with high passing rates for healthcare workers need to be emphasized.
    Matched MeSH terms: Equipment Design
  9. Ahmed S, Butterworth P, Barwick A, Sharma A, Hasan MZ, Nancarrow S
    Trials, 2022 Dec 16;23(1):1017.
    PMID: 36527100 DOI: 10.1186/s13063-022-06968-5
    BACKGROUND: Foot complications occur in conjunction with poorly controlled diabetes. Plantar forefoot ulceration contributes to partial amputation in unstable diabetics, and the risk increases with concomitant neuropathy. Reducing peak plantar forefoot pressure reduces ulcer occurrence and recurrence. Footwear and insoles are used to offload the neuropathic foot, but the success of offloading is dependent on patient adherence. This study aims to determine which design and modification features of footwear and insoles improve forefoot plantar pressure offloading and adherence in people with diabetes and neuropathy.

    METHODS: This study, involving a series of N-of-1 trials, included 21 participants who had a history of neuropathic plantar forefoot ulcers. Participants were recruited from two public hospitals and one private podiatry clinic in Sydney, New South Wales, Australia. This trial is non-randomised and unblinded. Participants will be recruited from three sites, including two high-risk foot services and a private podiatry clinic in Sydney, Australia. Mobilemat™ and F-Scan® plantar pressure mapping systems by TekScan® (Boston, USA) will be used to measure barefoot and in-shoe plantar pressures. Participants' self-reports will be used to quantify the wearing period over a certain period of between 2 and 4 weeks during the trial. Participant preference toward footwear, insole design and quality-of-life-related information will be collected and analysed. The descriptive and inferential statistical analyses will be performed using IBM SPSS Statistics (version 27). And the software NVivo (version 12) will be utilised for the qualitative data analysis.

    DISCUSSION: This is the first trial assessing footwear and insole interventions in people with diabetes by using a series of N-of-1 trials. Reporting self-declared wearing periods and participants' preferences on footwear style and aesthetics are the important approaches for this trial. Patient-centric device designs are the key to therapeutic outcomes, and this study is designed with that strategy in mind.

    TRIAL REGISTRATION: Australian New Zealand Clinical Trials Registry (ANZCTR) ACTRN12620000699965p. Registered on June 23, 2020.

    Matched MeSH terms: Equipment Design
  10. Amri NA, Quar TK, Chong FY, Bagatto M
    Int J Audiol, 2022 11;61(11):924-931.
    PMID: 34859745 DOI: 10.1080/14992027.2021.2005832
    OBJECTIVE: This study examined the accuracy of hearing aid output to DSL v5.0 Child targets in a group of children who wear hearing aids, and the impact on their auditory outcomes.

    DESIGN: For each participant, the output of the initial hearing aid fitting was compared to DSL v5.0 Child prescriptive targets and again after the fitting was adjusted using coupler-based verification and RECD measures. Outcomes for initial and adjusted fittings were examined using the Speech Intelligibility Index (SII), Parent's Evaluation of Aural/Oral Performance of Children (PEACH) rating scale, and speech perception tests in quiet and noise.

    STUDY SAMPLE: Sixty-eight children aged 3 months to 17 years with moderate to profound hearing loss participated in the study.

    RESULTS: Fit-to-targets improved significantly after hearing aids were adjusted to match targets to within 5 dB RMSE. Adjusted hearing aids provided increased aided audibility compared to initial fittings and resulted in improved speech perception scores and parent-reported hearing performance. Fifty percent of the children aged 6 to 17 years preferred their adjusted fitting compared to 10% who preferred their initial fitting.

    CONCLUSIONS: Improvement in fit-to-target to a validated paediatric prescriptive formula using best practice procedures can result in improved auditory outcomes and possible self-reported satisfaction.

    Matched MeSH terms: Equipment Design
  11. Li Y, Ghazilla RAR, Abdul-Rashid SH
    Int J Environ Res Public Health, 2022 Oct 22;19(21).
    PMID: 36360620 DOI: 10.3390/ijerph192113742
    In the current situation of global aging, the current market shortage of age-appropriate smart home products and the recent epidemic have led to greater isolation of the elderly, seriously affecting their physical and mental health. In order to optimize the sustainable user experience of the elderly when using smart home products, this paper proposes a research method based on Quality Function Deployment (QFD) for the optimal design of user experience of smart home products for the elderly, taking the design of age-appropriate home smart refrigerators as an example. Firstly, based on the results of market research and user interviews, the requirements of smart refrigerators for the elderly are screened and integrated, and the Kano model is used to prioritize these needs, resulting in the identification of important features needed in smart refrigerators for the elderly. Secondly, based on QFD, user requirements are transformed into design requirements, and a quality house model is established to ascertain the degree of importance of each design requirement through user ratings so as to obtain the key requirements as the theoretical basis for the solution design. Finally, optional solutions are generated for concept evaluation based on PUGH concept selection, comparing the advantages and disadvantages of the solutions and recombining them into an evaluation to determine the best solution. The quantitative evaluation of the four solutions reveals that Solution A has the highest score of 117.358, followed by Solution D with 113.259, Solution B with 96.415, and Solution C with 85.511, which is the lowest. The scoring allows the best design solution to be selected and applied to product development. The results show that the introduction of the Kano model and PUGH concept selection into QFD can be effectively used as a research method for optimizing the user experience of smart refrigerators for the elderly, and a corresponding design strategy for sustainable user experience optimization is proposed. The method and strategy provide guidance for the innovative design of new smart home products.
    Matched MeSH terms: Equipment Design*
  12. Hasan MM, Islam MT, Samsuzzaman M, Baharuddin MH, Soliman MS, Alzamil A, et al.
    Sci Rep, 2022 Jun 08;12(1):9433.
    PMID: 35676407 DOI: 10.1038/s41598-022-13522-5
    This work proposes a compact metasurface (MS)-integrated wideband multiple-input multiple-output (MIMO) antenna for fifth generation (5G) sub-6 GHz wireless communication systems. The perceptible novelty of the proposed MIMO system is its wide operating bandwidth, high gain, lower interelement gap, and excellent isolation within the MIMO components. The radiating patch of the antenna is truncated diagonally with a partially ground plane, and a metasurface has been employed for enhancing the antenna performance. The suggested MS integrated single antenna prototype has a miniature dimension of 0.58λ × 0.58λ × 0.02λ. The simulated and measured findings demonstrate a wideband characteristic starting from 3.11 to 7.67 GHz including a high realized gain of 8 dBi. The four-element MIMO system has been designed by rendering each single antenna orthogonally to one another while retaining compact size and wideband properties between 3.2 and 7.6 GHz. The suggested MIMO prototype has been designed and fabricated on a low loss Rogers RT5880 substrate with a miniature dimension of 1.05λ × 1.05λ × 0.02λ and its performance is evaluated using a suggested 10 × 10 array of a square enclosed circular split ring resonators within the same substrate material. The inclusion of the proposed metasurface with a backplane significantly reduces antenna backward radiation and manipulates the electromagnetic field, thus improving the bandwidth, gain and isolation of MIMO components. The suggested 4-port MIMO antenna offers a high realized gain of 8.3 dBi compared to existing MIMO antennas with an excellent average total efficiency of 82% in the 5G sub-6 GHz spectrum and is in good accordance with measured results. Furthermore, the developed MIMO antenna exhibits outstanding diversity characteristics in respect of envelope correlation coefficient (ECC) less than 0.004, diversity gain (DG) close to 10 dB (> 9.98 dB) and high isolation between MIMO components (> 15.5 dB). Therefore, the proposed MS-inspired MIMO antenna substantiates its applicability for 5G sub-6 GHz communication networks.
    Matched MeSH terms: Equipment Design
  13. Jeroish ZE, Bhuvaneshwari KS, Samsuri F, Narayanamurthy V
    Biomed Microdevices, 2021 Dec 03;24(1):3.
    PMID: 34860299 DOI: 10.1007/s10544-021-00595-8
    Heating plays a vital role in science, engineering, mining, and space, where heating can be achieved via electrical, induction, infrared, or microwave radiation. For fast switching and continuous applications, hotplate or Peltier elements can be employed. However, due to bulkiness, they are ineffective for portable applications or operation at remote locations. Miniaturization of heaters reduces power consumption and bulkiness, enhances the thermal response, and integrates with several sensors or microfluidic chips. The microheater has a thickness of ~ 100 nm to ~ 100 μm and offers a temperature range up to 1900℃ with precise control. In recent years, due to the escalating demand for flexible electronics, thin-film microheaters have emerged as an imperative research area. This review provides an overview of recent advancements in microheater as well as analyses different microheater designs, materials, fabrication, and temperature control. In addition, the applications of microheaters in gas sensing, biological, and electrical and mechanical sectors are emphasized. Moreover, the maximum temperature, voltage, power consumption, response time, and heating rate of each microheater are tabulated. Finally, we addressed the specific key considerations for designing and fabricating a microheater as well as the importance of microheater integration in COVID-19 diagnostic kits. This review thereby provides general guidelines to researchers to integrate microheater in micro-electromechanical systems (MEMS), which may pave the way for developing rapid and large-scale SARS-CoV-2 diagnostic kits in resource-constrained clinical or home-based environments.
    Matched MeSH terms: Equipment Design
  14. Hanif M, Jeoti V, Ahmad MR, Aslam MZ, Qureshi S, Stojanovic G
    Sensors (Basel), 2021 Nov 26;21(23).
    PMID: 34883867 DOI: 10.3390/s21237863
    Lately, wearable applications featuring photonic on-chip sensors are on the rise. Among many ways of controlling and/or modulating, the acousto-optic technique is seen to be a popular technique. This paper undertakes the study of different multilayer structures that can be fabricated for realizing an acousto-optic device, the objective being to obtain a high acousto-optic figure of merit (AOFM). By varying the thicknesses of the layers of these materials, several properties are discussed. The study shows that the multilayer thin film structure-based devices can give a high value of electromechanical coupling coefficient (k2) and a high AOFM as compared to the bulk piezoelectric/optical materials. The study is conducted to find the optimal normalised thickness of the multilayer structures with a material possessing the best optical and piezoelectric properties for fabricating acousto-optic devices. Based on simulations and studies of SAW propagation characteristics such as the electromechanical coupling coefficient (k2) and phase velocity (v), the acousto-optic figure of merit is calculated. The maximum value of the acousto-optic figure of merit achieved is higher than the AOFM of all the individual materials used in these layer structures. The suggested SAW device has potential application in wearable and small footprint acousto-optic devices and gives better results than those made with bulk piezoelectric materials.
    Matched MeSH terms: Equipment Design
  15. Md Nadzri N, Hamzaid NA, Chung TY
    J Med Eng Technol, 2021 Oct;45(7):574-581.
    PMID: 34184592 DOI: 10.1080/03091902.2021.1936238
    Individuals with paraplegia spend their time on the wheelchair for life. Adapting to prolonged wheelchair seating for almost all activities of daily living is challenging. The loss of abilities to sense any pain or excessive seating pressure cause them to remain seated on the wheelchair without any pressure relief activities. This situation leads to secondary complications including pressure ulcer which further degrades the individual's health. To overcome this, a wheelchair seating pressure relief training system (WSETs) was developed. Optimal placement of the force sensitive resistors (FSR) as seating pressure sensors on the cushion were determined, and their responses were investigated with 5 paraplegics. Two different FSR orientations, A and B, were compared. Each paraplegic sat in resting position and then performed pressure relief activities (PRA) which included whole body push-up, left and right lean and forward lean, before returning to resting position. Orientation B, with more forward positioned FSRs, showed higher sensitivity, implying better capture of high-risk area of pressure ulcer development. The FSR sensor readings were significantly different among pressure relief activities in all subjects (p 
    Matched MeSH terms: Equipment Design
  16. Yahaya ML, Zakaria ND, Noordin R, Abdul Razak K
    Biotechnol Appl Biochem, 2021 Oct;68(5):1095-1106.
    PMID: 32935878 DOI: 10.1002/bab.2029
    Salmonella and Shigella genera are common pathogens that contaminate foods and beverages. Lateral flow assays (LFA) are commonly used to detect these pathogens. However, most of the developed LFAs are for single detection. Simultaneous detection of pathogens is required to reduce cost and time. In this work, 40 nm gold nanoparticles (AuNPs) were synthesized using the seeding growth method as labeling agent. The AuNPs were characterized and conjugated with mouse anti-Gram negative endotoxin antibody. The nitrocellulose membrane HF135 was immobilized with anti-mouse IgG antibody as a control line and two separate test lines with either anti-Shigella or anti-Salmonella antibody, respectively. Color intensity of test lines was observed for positive samples. A milk sample was used as proof of concept to mimic actual contamination. The limit of detection of the LFA was 3.0 × 106 CFU/mL for multiplex detection of Shigella flexneri and Salmonella Typhi and for both single detections. The result was comparable with the enzyme-linked immunosorbent assay (ELISA) analysis. The produced LFA could differentiate between Shigella flexneri, Shigella boydii, Salmonella Enteritidis, and Salmonella Typhi. The developed LFA was able to identify Shigella flexneri and Salmonella Typhi with good sensitivity in milk samples, thus, beneficial to ensure the safety of food before entering the market.
    Matched MeSH terms: Equipment Design
  17. Ahmad KA, Rahman MFA, Zain KAM, Haron MN, Manaf AA
    Sensors (Basel), 2021 Aug 19;21(16).
    PMID: 34451023 DOI: 10.3390/s21165582
    In acoustic receiver design, the receiving sensitivity and bandwidth are two primary parameters that determine the performance of a device. The trade-off between sensitivity and bandwidth makes the design very challenging, meaning it needs to be fine-tuned to suit specific applications. The ability to design a PMUT with high receiving sensitivity and a wide bandwidth is crucial to allow a wide spectrum of transmitted frequencies to be efficiently received. This paper presents a novel structure involving a double flexural membrane with a fluidic backing layer based on an in-plane polarization mode to optimize both the receiving sensitivity and frequency bandwidth for medium-range underwater acoustic applications. In this structure, the membrane material and electrode configuration are optimized to produce good receiving sensitivity. Simultaneously, a fluidic backing layer is introduced into the double flexural membrane to increase the bandwidth. Several piezoelectric membrane materials and various electrode dimensions were simulated using finite element analysis (FEA) techniques to study the receiving performance of the proposed structure. The final structure was then fabricated based on the findings from the simulation work. The pulse-echo experimental method was used to characterize and verify the performance of the proposed device. The proposed structure was found to have an improved bandwidth of 56.6% with a receiving sensitivity of -1.8864 dB rel 1 V µPa. For the proposed device, the resonance frequency and center frequency were 600 and 662.5 kHz, respectively, indicating its suitability for the targeted frequency range.
    Matched MeSH terms: Equipment Design
  18. Yang Y, Wei X, Zhang N, Zheng J, Chen X, Wen Q, et al.
    Nat Commun, 2021 08 12;12(1):4876.
    PMID: 34385436 DOI: 10.1038/s41467-021-25075-8
    While the printed circuit board (PCB) has been widely considered as the building block of integrated electronics, the world is switching to pursue new ways of merging integrated electronic circuits with textiles to create flexible and wearable devices. Herein, as an alternative for PCB, we described a non-printed integrated-circuit textile (NIT) for biomedical and theranostic application via a weaving method. All the devices are built as fibers or interlaced nodes and woven into a deformable textile integrated circuit. Built on an electrochemical gating principle, the fiber-woven-type transistors exhibit superior bending or stretching robustness, and were woven as a textile logical computing module to distinguish different emergencies. A fiber-type sweat sensor was woven with strain and light sensors fibers for simultaneously monitoring body health and the environment. With a photo-rechargeable energy textile based on a detailed power consumption analysis, the woven circuit textile is completely self-powered and capable of both wireless biomedical monitoring and early warning. The NIT could be used as a 24/7 private AI "nurse" for routine healthcare, diabetes monitoring, or emergencies such as hypoglycemia, metabolic alkalosis, and even COVID-19 patient care, a potential future on-body AI hardware and possibly a forerunner to fabric-like computers.
    Matched MeSH terms: Equipment Design
  19. Koh HP, Shamsudin NS, Tan MMY, Mohd Pauzi Z
    J Clin Pharm Ther, 2021 Aug;46(4):1129-1138.
    PMID: 33768601 DOI: 10.1111/jcpt.13410
    WHAT IS KNOWN AND OBJECTIVE: Nebulizer use has been suspended in Malaysian public health facilities due to the potential to aggravate COVID-19 nosocomial transmission. Currently, our facility uses the pressurized metered-dose inhaler (pMDI) bronchodilator with Venturi mask modified spacer (VMMS) in patients visiting the Emergency Department (ED) for mild to moderate exacerbation of asthma and chronic obstructive pulmonary disease (COPD). We sought to assess the outcomes and acceptance of pMDI-VMMS in the outpatient ED of a tertiary hospital in Malaysia.

    METHODS: We analysed the total visits and discharge rates during periods of using the nebulizer and current pMDI-VMMS methods. The acceptance of pMDI-VMMS by patients and assistant medical officers (AMOs) were assessed by questionnaire.

    RESULTS AND DISCUSSION: We analysed 3184 ED visits and responses from 103 patients and 32 AMOs. The direct discharge rate was similar for both nebulizer (n = 2162, 92.5%) and pMDI-VMMS method (n = 768, 90.7%) (p-value = 0.120). Twenty-eight patients (27.2%) favoured the pMDI-VMMS over the nebulizer, whereas 36 patients (35.0%) had no preference for either method. Sixty-four patients (62.1%) felt that the current pMDI-VMMS method was better or at least as effective in relieving their symptoms as a nebulizer. The current method was favoured over the nebulizer by twenty-seven AMOs (84.4%). Twenty-eight (87.5%) AMOs suggested that the current method was more effective than the nebulizer.

    WHAT IS NEW AND CONCLUSION: The bronchodilator delivered via pMDI-VMMS appeared to be comparable to nebulizer in treating mild to moderate asthma and COPD exacerbations in the outpatient ED. Most patients and AMOs accepted the use of pMDI-VMMS in the outpatient ED during the current COVID-19 pandemic. The Venturi mask modified spacer can be a cheap and effective alternative to the commercial spacer in a resource-limited situation.

    Matched MeSH terms: Equipment Design
  20. Hasan N, Sham NFR, Karim MKA, Fuad SBSA, Hasani NAH, Omar E, et al.
    Sci Rep, 2021 Jul 15;11(1):14559.
    PMID: 34267293 DOI: 10.1038/s41598-021-93964-5
    We presented a development of a custom lead shield and mouse strainer for targeted irradiation from the gamma-cell chamber. This study was divided into two parts i.e., to (i) fabricate the shield and strainer from a lead (Pb) and (ii) optimize the irradiation to the mice-bearing tumour model with 2 and 8 Gy absorbed doses. The lead shielding was fabricated into a cuboid shape with a canal on the top and a hole on the vertical side for the beam path. Respective deliveries doses of 28 and 75 Gy from gamma-cell were used to achieve 2 and 8 Gy absorbed doses at the tumour sites.
    Matched MeSH terms: Equipment Design
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links