MyMedR

Displaying publications 1 - 20 of 65 in total

Abstract:

Sort:

An influenza B outbreak during the 2007/2008 winter among appropriately immunized elderly people living in a nursing home

Camilloni B, Neri M, Lepri E, Basileo M, Sigismondi N, Puzelli S, et al.

Vaccine, 2010 Nov 3;28(47):7536-41.
PMID: 20846530 DOI: 10.1016/j.vaccine.2010.08.064

The study evaluated the immunogenicity and efficacy of a trivalent subunit MF59-adjuvanted influenza vaccine (A/Wisconsin/67/05 (H3N2), A/Solomon Islands/3/06 (H1N1) and B/Malaysia/2506/04) in preventing serologically diagnosed infections in a group of 67 institutionalized elderly volunteers during 2007/2008 winter, characterized by co-circulation of drifted A/H3N2, A/H1N1 and B influenza viruses. Influenza vaccination induced a significant increase in the amounts of hemagglutination inhibiting antibodies, both against the vaccine and the epidemic drifted strains. However, vaccination did not prevent the circulation of the new drifted influenza B virus (B/Florida/4/06-like), belonging to the B/Yamagata/16/88-lineage, antigenically and genetically distinct from B/Victoria/2/87-lineage viruses from which the vaccine B strain was derived.

Matched MeSH terms: Polysorbates/administration & dosage
Cross-reactive antibodies in middle-aged and elderly volunteers after MF59-adjuvanted subunit trivalent influenza vaccine against B viruses of the B/Victoria or B/Yamagata lineages

Camilloni B, Neri M, Lepri E, Iorio AM

Vaccine, 2009 Jun 24;27(31):4099-103.
PMID: 19410623 DOI: 10.1016/j.vaccine.2009.04.078

This study evaluated whether MF59-adjuvanted subunit trivalent influenza vaccine for the 2003/04 winter season (A/Moscow/10/99, H3N2; A/New Caledonia/20/99, H1N1; B/Hong Kong/330/01) would confer protection against mismatched and frequently co-circulating variants of influenza B/Victoria- and B/Yamagata-like virus strains. Haemagglutination inhibiting (HI) antibodies were measured in middle-aged and elderly volunteers against the homologous B/Victoria-like vaccine strain (B/Hong Kong/330/01) and against mismatched B/Victoria-like (B/Malaysia/2506/04) and B/Yamagata-like (B/Singapore/379/99 and B/Shanghai/361/02) strains. Immunization induced significant increases in the amounts of HI antibodies against all influenza B strains under investigation. However, the responses against the heterologous B/Shanghai/361/02 virus did not reach the desirable values of seroprotection. An age-dependent decline of the responses was found for B/Victoria-like antigens, but not for B/Yamagata-like strains. Although further studies are needed, our data support the recommendation of including influenza B viruses of the B/Victoria and B/Yamagata lineages in the future influenza vaccine preparations.

Matched MeSH terms: Polysorbates/administration & dosage; Polysorbates/pharmacology*
Fulltext Lactococcus Lactis Strain A5 Producing Nisin-like Bacteriocin Active against Gram Positive and Negative Bacteria

Azhar NS, Md Zin NH, Hamid THTA

Trop Life Sci Res, 2017 Jul;28(2):107-118.
PMID: 28890764 MyJurnal DOI: 10.21315/tlsr2017.28.2.8

In this study, a Lactic acid bacteria (LAB) strain was isolated on MRS medium from gastro-intestinal tissues of Broadhead catfish (Clarias macrocephalus). Out of 50 isolates, 25 isolates were found to be positive on lactose utilisation test and were identified to be gram positive cocci. Using disc diffusion methods, one out of 22 isolates, i.e., a strain A5 demonstrated inhibitions against three indicator organisms; Bacillus cereus, Staphylococcus aureus and Salmonella thyphimurium. Partial 16S rDNA sequencing identified isolate A5 as a member of Lactococcus lactis, with 100% DNA homology. Cell free supernatant fluid from Lactococcus lactis A5 showed inhibitory activities against both gram positive pathogens (Bacillus cereus and Staphylococcus aureus) and gram negative pathogens (Salmonella thyphimurium). Chloroform precipitated bacteriocin retained antagonistic activities in the presence of catalase and lysozyme; and was completely inactivated by Proteinase K treatment. The bacteriocin has a molecular weight of 3.4 kDa, based on SDS-PAGE analysis and the extract was heat stable at 37°C and 65°C, for 15 minutes. The antibacterial activity was suppressed with the addition of EDTA but was significantly increased with the addition of SDS, Triton X-100, Tween 20 and Tween 80. This bacteriocin belongs to class 1 bacteriocin, which was shown to have a nisin-like properties. This strain can be used as potential probiotics in animal or aquaculture feeding; and the bacteriocin it produces will be useful in food preservative.

Matched MeSH terms: Polysorbates
Fulltext Preparation of Tween 80-Zn/Al-levodopa-layered double hydroxides nanocomposite for drug delivery system

Kura AU, Hussein-Al-Ali SH, Hussein MZ, Fakurazi S

ScientificWorldJournal, 2014;2014:104246.
PMID: 24782658 DOI: 10.1155/2014/104246

We incorporated anti-Parkinsonian drug, levodopa (dopa), in Zn/Al-LDH by coprecipitation method to form dopa-LDH nanocomposite. Further coating of Tween-80 on the external surfaces of dopa-LDH nanocomposite was achieved through the oxygen of C=O group of Tween-80 with the layer of dopa-LDH nanocomposite. The final product is called Tween-dopa-LDH nanocomposite. The X-ray diffraction indicates that the Tween-dopa-LDH nanocomposite was formed by aggregation structure. From the TGA data, the Tween-80 loading on the surface of LDH and dopa-LDH was 8.6 and 7.4%, respectively. The effect of coating process on the dopa release from Tween-dopa-LDH nanocomposite was also studied. The release from Tween-dopa-LDH nanocomposite shows slower release compared to the release of the drug from dopa-LDH nanocomposite as done previously in our study, presumably due to the retarding shielding effect. The cell viability study using PC12 showed improved viability with Tween-80 coating on dopa-LDH nanocomposite as studied by mitochondrial dehydrogenase activity (MTT assay).

Matched MeSH terms: Polysorbates/chemistry*
Evaluation of Tween 80 incorporated media to increase pathogen isolation from peritoneal fluid of CAPD patients at Hospital Kuala Lumpur

Ganapathy Pillay S, Mohd Amin SDW, Masri SN, Joseph NM, Amran F, Van Belkum A, et al.

Malays J Pathol, 2021 Aug;43(2):261-268.
PMID: 34448790

INTRODUCTION: Continuous ambulatory peritoneal dialysis (CAPD)-associated peritonitis remains a major complication in patients on CAPD leading to increased morbidity and mortality. Successful therapy of peritonitis is highly dependent on a positive microbiological culture because narrow spectrum antibiotics are essential to efficiently combat infection. Therefore, this study evaluated the performance of Tween 80 containing media at three different concentrations (0.1%, 1.0% and 2.0%) to increase the pathogen yield from peritoneal fluid in comparison with the standard culture media.
MATERIALS AND METHODS: Peritoneal fluid samples (n=121) obtained from CAPD patients suspected of peritonitis at Hospital Kuala Lumpur were analysed macroscopically and microscopically prior to culture. All samples were cultured on seven different culture media, including sheep blood agar, MacConkey agar, Sabouraud dextrose agar, brain heart infusion agar and Tween 80 incorporated blood agar. All plates were incubated at an optimum temperature up to 48 hours.
RESULTS AND CONCLUSION: Among all the culture media investigated, 0.1% to 2.0% Tween 80 incorporated blood agar yielded the highest positive culture (23/121) in comparison with all other standard media, thus lowering the negative culture rate among CAPD patients. Statistical analysis by Chi Square revealed significant differences (p <0.001) between the three concentrations of Tween 80 tested in this study. Among the three different concentrations of Tween 80 optimised in this study, blood agar containing 0.1% Tween 80 generated the best results, achieved by optimum growth of all Gram-positive organisms, Gram-negative organisms and yeast cells simultaneously. Using a small amount of detergent at low cost significantly increased the pathogen yield during CAPD-associated peritonitis.

Matched MeSH terms: Polysorbates/adverse effects
Oral calcium pectinate-insulin nanoparticles: influences of alginate, sodium chloride and Tween 80 on their blood glucose lowering performance

Wong TW, Sumiran N

J Pharm Pharmacol, 2014 May;66(5):646-57.
PMID: 24329400 DOI: 10.1111/jphp.12192

Objective: Examine the formation of pectin-insulin nanoparticles and their blood glucose lowering properties.

Methods: The calcium pectinate nanoparticles were prepared by ionotropic gelation method, with alginate, sodium chloride or Tween 80 as additive. Their in vitro physicochemical, drug release and in vivo blood glucose lowering characteristics were evaluated.

Key findings: Spherical calcium pectinate-insulin nanoparticles were characterized by size, zeta potential, insulin content and insulin association efficiency of 348.4 ± 12.9 nm, -17.9 ± 0.8 mV, 8.4 ± 1.0% and 63.8 ± 7.4%, respectively. They released less than 25% insulin following 24 h in simulated intestinal medium and exhibited delayed blood glucose lowering effect in rats. Incorporation of solubilizer sodium chloride or Tween 80 into nanoparticles did not enhance blood glucose lowering capacity owing to sodium chloride reduced matrix insulin content and Tween 80 interacted with water and had its blood glucose dilution effect negated. Combination of nanoparticles with alginate gel to allow prolonged intestinal residence and more insulin release did not enhance their blood glucose lowering capacity because of calcium alginate-cross-linked gel formation that could retard insulin release and migration into systemic circulation.

Conclusion: Physicochemical responses of additives in vivo affected blood glucose regulation property of pectin-insulin nanoparticles.

Keywords: Tween 80; alginate; insulin; nanoparticle; pectin.

Matched MeSH terms: Polysorbates/chemistry
Palm olein corrosion inhibitor for aluminium in Hcl solution

Junaidah Jai, Wan Shabuddin Wan Ali

Scientific Research Journal, 2011;8(2):49-70.
MyJurnal

Aluminium (Al) is a low cost, lightweight and corrosion resistant material, which corrodes when exposed to pitting agents. Palm olein exhibits characteristics, which indicate its suitability as a corrosion inhibitor. Tween 20, hexane and diethyl triamine were used as additives to Palm olein to form the inhibitor formulation POT2OHA. The inhibition efficiency (IE) and behaviour of the POT2OHA were determined using potentiodynamic polarization in which Al 6061 samples were immersed in a 1 M HC1 solution at 26, 50 and 70 °C in the presence of different POT2OHA concentrations: 0, 0.03, 0.07, 0.10, 0.13 and 0.17 M The IE increased with increasing POT2OHA concentration, but decreased with increasing temperature. The work presented indicates that POT2OHA is a mixed-type inhibitor capable of inhibiting both corrosive anodic and cathodic reactions. According to the Langmuir isotherm results POT2OHA adsorbs on the A16061 surface through semiphys iosorption and/or semi-chemisorption. The POT2OHA adsorption mechanism on Al 6061 takes through the protonation of micelles by the HC1 solution, whereby protonated micelles in the presence of chloride ions adsorb on both cathodic and anodic surface corrosion sites.

Matched MeSH terms: Polysorbates
Fulltext An Artificial Neural Network Based Analysis of Factors Controlling Particle Size in a Virgin Coconut Oil-Based Nanoemulsion System Containing Copper Peptide

Samson S, Basri M, Fard Masoumi HR, Abdul Malek E, Abedi Karjiban R

PLoS One, 2016;11(7):e0157737.
PMID: 27383135 DOI: 10.1371/journal.pone.0157737

A predictive model of a virgin coconut oil (VCO) nanoemulsion system for the topical delivery of copper peptide (an anti-aging compound) was developed using an artificial neural network (ANN) to investigate the factors that influence particle size. Four independent variables including the amount of VCO, Tween 80: Pluronic F68 (T80:PF68), xanthan gum and water were the inputs whereas particle size was taken as the response for the trained network. Genetic algorithms (GA) were used to model the data which were divided into training sets, testing sets and validation sets. The model obtained indicated the high quality performance of the neural network and its capability to identify the critical composition factors for the VCO nanoemulsion. The main factor controlling the particle size was found out to be xanthan gum (28.56%) followed by T80:PF68 (26.9%), VCO (22.8%) and water (21.74%). The formulation containing copper peptide was then successfully prepared using optimum conditions and particle sizes of 120.7 nm were obtained. The final formulation exhibited a zeta potential lower than -25 mV and showed good physical stability towards centrifugation test, freeze-thaw cycle test and storage at temperature 25°C and 45°C.

Matched MeSH terms: Polysorbates/chemistry
Fulltext Optimization of process parameters in preparation of tocotrienol-rich red palm oil-based nanoemulsion stabilized by Tween80-Span 80 using response surface methodology

Chong WT, Tan CP, Cheah YK, B Lajis AF, Habi Mat Dian NL, Kanagaratnam S, et al.

PLoS One, 2018;13(8):e0202771.
PMID: 30142164 DOI: 10.1371/journal.pone.0202771

Red palm oil (RPO) is a natural source of Vitamin E (70-80% tocotrienol). It is a potent natural antioxidant that can be used in skin-care products. Its antioxidant property protects skin from inflammation and aging. In our work, a tocotrienol-rich RPO-based nanoemulsion formulation was optimized using response surface methodology (RSM) and formulated using high pressure homogenizer. Effect of the concentration of three independent variables [surfactant (5-15 wt%), co-solvent (10-30 wt%) and homogenization pressure (500-700 bar)] toward two response variables (droplet size, polydispersity index) was studied using central composite design (CCD) coupled to RSM. RSM analysis showed that the experimental data could be fitted into a second-order polynomial model and the coefficients of multiple determination (R2) is 0.9115. The optimized formulation of RPO-based nanoemulsion consisted of 6.09 wt% mixed surfactant [Tween 80/Span 80 (63:37, wt)], 20 wt% glycerol as a co-solvent via homogenization pressure (500 bar). The optimized tocotrienol-rich RPO-based nanoemulsion response values for droplet size and polydispersity index were 119.49nm and 0.286, respectively. The actual values of the formulated nanoemulsion were in good agreement with the predicted values obtained from RSM, thus the optimized compositions have the potential to be used as a nanoemulsion for cosmetic formulations.

Matched MeSH terms: Polysorbates/chemistry
Fulltext Acyclovir-Loaded Solid Lipid Nanoparticles: Optimization, Characterization and Evaluation of Its Pharmacokinetic Profile

Hassan H, Bello RO, Adam SK, Alias E, Meor Mohd Affandi MMR, Shamsuddin AF, et al.

Nanomaterials (Basel), 2020 Sep 09;10(9).
PMID: 32916823 DOI: 10.3390/nano10091785

Acyclovir is an antiviral drug used for the treatment of herpes simplex virus infection. Its oral bioavailability is low; therefore, frequent and high doses are prescribed for optimum therapeutic efficacy. Moreover, the current therapeutic regimen of acyclovir is associated with unwarranted adverse effects, hence prompting the need for a suitable drug carrier to overcome these limitations. This study aimed to develop solid lipid nanoparticles (SLNs) as acyclovir carriers and evaluate their in vivo pharmacokinetic parameters to prove the study hypothesis. During the SLN development process, response surface methodology was exploited to optimize the composition of solid lipid and surfactant. Optimum combination of Biogapress Vegetal 297 ATO and Tween 80 was found essential to produce SLNs of 134 nm. The oral bioavailability study showed that acyclovir-loaded SLNs possessed superior oral bioavailability when compared with the commercial acyclovir suspension. The plasma concentration of acyclovir-loaded SLNs was four-fold higher than the commercial suspension. Thus, this investigation presented promising results that the method developed for encapsulation of acyclovir offers potential as an alternative pathway to enhance the drug's bioavailability. In conclusion, this study exhibited the feasibility of SLNs as an oral delivery vehicle for acyclovir and therefore represents a new promising therapeutic concept of acyclovir treatment via a nanoparticulate drug delivery system.

Matched MeSH terms: Polysorbates
Fulltext Incorporation of Levodopa into Biopolymer Coatings Based on Carboxylated Carbon Nanotubes for pH-Dependent Sustained Release Drug Delivery

Tan JM, Saifullah B, Kura AU, Fakurazi S, Hussein MZ

Nanomaterials (Basel), 2018 May 31;8(6).
PMID: 29857532 DOI: 10.3390/nano8060389

Four drug delivery systems were formulated by non-covalent functionalization of carboxylated single walled carbon nanotubes using biocompatible polymers as coating agent (i.e., Tween 20, Tween 80, chitosan or polyethylene glycol) for the delivery of levodopa, a drug used in Parkinson's disease. The chemical interaction between the coating agent and carbon nanotubes-levodopa conjugate was confirmed by Fourier transform infrared (FTIR) and Raman studies. The drug release profiles were revealed to be dependent upon the type of applied coating material and this could be further adjusted to a desired rate to meet different biomedical conditions. In vitro drug release experiments measured using UV-Vis spectrometry demonstrated that the coated conjugates yielded a more prolonged and sustained release pattern compared to the uncoated conjugate. Cytotoxicity of the formulated conjugates was studied by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay using normal mouse embryonic fibroblast 3T3 cell line. Compared to the non-coated conjugate, the MTT data indicated that the coating procedure improved the biocompatibility of all systems by 34⁻41% when the concentration used exceeded 100 μg/mL. In conclusion, the comprehensive results of this study suggest that carbon nanotubes-based drug carrier coated with a suitable biomaterial may possibly be a potential nanoparticle system that could facilitate drug delivery to the brain with tunable physicochemical properties.

Matched MeSH terms: Polysorbates
Fulltext Effects of selected polysorbate and sucrose ester emulsifiers on the physicochemical properties of astaxanthin nanodispersions

Anarjan N, Tan CP

Molecules, 2013 Jan 09;18(1):768-77.
PMID: 23303336 DOI: 10.3390/molecules18010768

The effects of selected nonionic emulsifiers on the physicochemical characteristics of astaxanthin nanodispersions produced by an emulsification/evaporation technique were studied. The emulsifiers used were polysorbates (Polysorbate 20, Polysorbate 40, Polysorbate 60 and Polysorbate 80) and sucrose esters of fatty acids (sucrose laurate, palmitate, stearate and oleate). The mean particle diameters of the nanodispersions ranged from 70 nm to 150 nm, depending on the emulsifier used. In the prepared nanodispersions, the astaxanthin particle diameter decreased with increasing emulsifier hydrophilicity and decreasing carbon number of the fatty acid in the emulsifier structure. Astaxanthin nanodispersions with the smallest particle diameters were produced with Polysorbate 20 and sucrose laurate among the polysorbates and the sucrose esters, respectively. We also found that the Polysorbate 80- and sucrose oleate-stabilized nanodispersions had the highest astaxanthin losses (i.e., the lowest astaxanthin contents in the final products) among the nanodispersions. This work demonstrated the importance of emulsifier type in determining the physicochemical characteristics of astaxanthin nano-dispersions.

Matched MeSH terms: Polysorbates/chemistry*
Fulltext Production of Nanoemulsions from Palm-Based Tocotrienol Rich Fraction by Microfluidization

Goh PS, Ng MH, Choo YM, Amru NB, Chuah CH

Molecules, 2015;20(11):19936-46.
PMID: 26556328 DOI: 10.3390/molecules201119666

In the present study, tocotrienol rich fraction (TRF) nanoemulsions were produced as an alternative approach to improve solubility and absorption of tocotrienols. In the present study, droplet size obtained after 10 cycles of homogenization with increasing pressure was found to decrease from 120 to 65.1 nm. Nanoemulsions stabilized with Tween series alone or emulsifier blend Brij 35:Span 80 (0.6:0.4 w/w) homogenized at 25,000 psi and 10 cycles, produced droplet size less than 100 nm and a narrow size distribution with a polydispersity index (PDI) value lower than 0.2. However blend of Tween series with Span 80 produced nanoemulsions with droplet size larger than 200 nm. This work has also demonstrated the amount of tocols losses in TRF nanoemulsion stabilized Tweens alone or emulsifier blend Brij 35:Span 80 (0.6:0.4 w/w) ranged between 3%-25%. This can be attributed to the interfacial film formed surrounding the droplets exhibited different level of oxidative stability against heat and free radicals created during high pressure emulsification.

Matched MeSH terms: Polysorbates
Performance of a novel casing made of chitosan under traditional sausage manufacturing conditions

Adzaly NZ, Jackson A, Kang I, Almenar E

Meat Sci, 2016 Mar;113:116-23.
PMID: 26656870 DOI: 10.1016/j.meatsci.2015.11.023

The goal of this study was to validate the commercial feasibility of a novel casing formed from chitosan containing cinnamaldehyde (2.2%, w/v), glycerol (50%, w/w) and Tween 80 (0.2% w/w) under traditional sausage manufacturing conditions. Meat batter was stuffed into both chitosan and collagen (control) casings and cooked in a water bath. Before and after cooking, both casings were compared for mechanical, barrier, and other properties. Compared to collagen, the chitosan casing was a better (P≤0.05) barrier to water, oxygen, liquid smoke, and UV light. In mechanical and other properties, the chitosan casing had higher (P≤0.05) tensile strength, lower (P≤0.05) elongation at break and tensile energy to break, and better (P≤0.05) transparency whereas a similar (P>0.05) water solubility to the collagen casing. Overall, the chitosan casing was less affected by sausage manufacturing conditions than the collagen casing, indicating that chitosan casing has potential as an alternative to the current collagen casing in the manufacture of sausages.

Matched MeSH terms: Polysorbates
Fulltext Oral bioavailability enhancement of acyclovir from solid lipid nanoparticles drug delivery system

Haniza Hassan, Ahmad Fuad Shamsuddin, Ekram Alias, Meor Mohd Redzuan Meor Mohd Affandi, Siti Khadijah Adam, Rusliza Basir

Malaysian Journal of Medicine and Health Sciences, 2019;15(107):2-2.
MyJurnal

Introduction:Acyclovir, a widely marketed antiviral drug is used for the treatment of Herpes Simplex infection. High doses of acyclovir are prescribed to patients to attain its maximum therapeutic effect due to its poor absorption and low oral bioavailability. The current therapeutics regiment of acyclovir are known to cause unwarranted adverse effects, thus prompted the need for a suitable drug carrier to improve the pharmacokinetic limitations. Develop-ment of solid lipid nanoparticles for oral delivery of acyclovir proposed in this study aimed to enhance acyclovir oral bioavailability. Methods: Comprehensive experiments and a series of optimization process were carried out to ensure reproducibility and assurance of product quality. The physicochemical characteristics of the solid lipid nanoparticles developed from plant-based solid lipid, Biogapress Vegetal 297 ATO with polysorbate 80 as an emul-sifying agent were also evaluated. Results: The spherical-shaped nanoparticles had an average size of 123 nm with good drug entrapment efficiency, up to 80%. The in vitro drug release study showed that solid lipid nanoparticles had prolonged acyclovir release in simulated intestinal fluid for 24 hours. The nanoparticles formulation was con-sidered stable during storage at refrigerated temperature for at least three months. In vivo oral bioavailability study showed that acyclovir-loaded solid lipid nanoparticles possessed superior oral bioavailability when compared with the commercial acyclovir suspension. Conclusion: In conclusion, this study exhibited the feasibility of solid lipid nanoparticles as an oral delivery vehicle for acyclovir and therefore represent a new promising therapeutic concept of nanoparticulate delivery system.

Matched MeSH terms: Polysorbates
Fulltext Lean public emergency department efficiency evaluation by Slack-based Measure Data Envelopment Analysis

Tiong Ngee-Wen, Suhaiza Zailani, Azmin Azliza Aziz, Rashidi Ahmad

Malaysian Journal of Medicine and Health Sciences, 2020;16(2):105-111.
MyJurnal

Introduction: Lean healthcare outcome is usually measured with multiple key performance metrics but there is a lack of tools that enabled efficiency assessment. This research aimed to assess the efficiency among lean public emergen- cy departments (ED) through Slack-Based Measure Data Envelopment Analysis (SBM-DEA) and evaluate the impact of lean on the efficiency in public emergency departments. Methods: A retrospective observational study design using data on the number of support staff, number of doctors, number of discharge, arrival to consultant and length of stay. Efficiency scores of 20 Malaysian public EDs were computed using SBM-DEA modelling and compared be- tween before and after lean implementation. Results: A total of 13 out of 20 public EDs exhibited improvement in ar- rival to consultant and length of stay upon lean implementation. However, only 9 out of the 13 public EDs have had an improvement in efficiency score. Conclusion: Lean healthcare demonstrated a positive impact on the efficiency level of some public EDs. The SBM-DEA model offers the benchmarking capability and slack elimination information that may complement the lean continuous improvement philosophy.

Matched MeSH terms: Polysorbates
Fulltext Correlation of mean cycle threshold value of GeneXpert MTB/RIF and time to detection in Mycobacterium growth indicator tubes for Mycobacterium tuberculosis isolates of Kota Kinabalu, Sabah

Nor Fazirah Jamal, Zaw Lin, Zainal Arifin Mustafa, Ahmad Faris Abdullah, Naing Oo Tha, Nor Amalina Emran, et al.

Malaysian Journal of Medicine and Health Sciences, 2019;15(106):38-38.
MyJurnal

Introduction: Tuberculosis (TB) is the ninth leading cause of mortality in the world while it is the most prevalent infection which is ranked abolve HIV/AIDS. In Malaysia, tuberculosis is still a public health problem. Sabah State on Malaysian Borneo had 20-30% of total TB cases of the country. In Sabah, case notification rate of almost 200 per 100,000 population was still present in the last 10 years. Hotspots are defined as TB notification rate more than 100/100.000 in a district or TB notification rate more than 100/100,000 in the squatters’ area. In this study, cycle threshold (ct) values in GeneXpertMTB/RIF (Xpert) were tried to be correlated with growth in Mycobacterim growth indicator tubes (MGIT) by measurement of time to detection (TTD). Methods: Sputum samples from six hotspots of Kota Kinabalu were studied by Xpert as well as MGIT culture after processing of sputum samples. The correlation between Mean ct value of Xpert and TTD in MGIT was analysed by using IBM SPSS Statistic 25 and the statistical test used was Pearson Correlation test. Results: The results of Xpert indicated 35 of 204 sputum samples were pos-itive whereas only one sample was rifampicin resistant. The mean ct values were very low, low and medium in all the hotspots with sputum from one hotspot showed medium ct values predominantly. The sputum from remaining hotspots showed mainly very low and low ct values. MGIT results showed no growth in five samples with two very low, two low and one medium mean ct values. Conclusion: The finding indicated that there were correlations be-tween mean ct values of Xpert and TTD in MGIT with a few exceptions.

Matched MeSH terms: Polysorbates
Fulltext What are the barriers and solutions to renal transplantation in Malaysia? a qualitative key-informant study

Peter Gan Kim Soon, Sanjay Rampal, Lim Soo Kun, Tin Tin Su

Malaysian Journal of Medicine and Health Sciences, 2019;15(106):8-8.
MyJurnal

Introduction: Kidney transplantation (KT) is the preferred end-stage renal disease (ESRD) treatment because it pro-vides a better survival rate, quality of life as well as a cheaper alternative. However, Malaysia’s KT rates is consis-tently low considering that ESRD rates have been increasing exponentially. With only four hospitals performing KT, there’s a gap to indicate a lack of evaluation in KT system of Malaysia. Qualitative study was undertaken to explore and describe the barriers and solutions improve the rates and service of KT in Malaysia. Methods: Semi-structured interviews adopted as qualitative methodological approach to explore current KT policy and service in Malaysia be-tween March – May 2018 in Kuala Lumpur. Eight key-informants selected using stakeholder analysis and informed consent were obtained. Interviews were digitally audio-recorded, transcribed verbatim and analysed using thematic analysis. Results: Barriers and solutions of Malaysia’s KT are the results of complex interplay of personal, cultural, and environmental factors that can be categorized and described using the five levels of influence conceptualized by the socio-ecological model (SEM). Guidance for developing culturally appropriate and sensitive interventional strategies was elicited from the key informants’ experiences to improve KT rate and services in Malaysia. Conclusion:Malaysia is experiencing very low rate of KT compared to other countries. The use of SEM provided a framework to foster a better understanding of current practice, barriers and solutions to KT in Malaysia. Implications of these find-ings could prompt policy change for better KT service delivery model. Further stakeholder engagement and evalua-tion is required to align best practices to improve KT rates and service in Malaysia that is comparable to high-income countries.

Matched MeSH terms: Polysorbates
Efficient Prediction of In Vitro Piroxicam Release and Diffusion From Topical Films Based on Biopolymers Using Deep Learning Models and Generative Adversarial Networks

Salma H, Melha YM, Sonia L, Hamza H, Salim N

J Pharm Sci, 2021 06;110(6):2531-2543.
PMID: 33548245 DOI: 10.1016/j.xphs.2021.01.032

The purpose of this study was to simultaneously predict the drug release and skin permeation of Piroxicam (PX) topical films based on Chitosan (CTS), Xanthan gum (XG) and its Carboxymethyl derivatives (CMXs) as matrix systems. These films were prepared by the solvent casting method, using Tween 80 (T80) as a permeation enhancer. All of the prepared films were assessed for their physicochemical parameters, their in vitro drug release and ex vivo skin permeation studies. Moreover, deep learning models and machine learning models were applied to predict the drug release and permeation rates. The results indicated that all of the films exhibited good consistency and physicochemical properties. Furthermore, it was noticed that when T80 was used in the optimal formulation (F8) based on CTS-CMX3, a satisfactory drug release pattern was found where 99.97% of PX was released and an amount of 1.18 mg/cm2 was permeated after 48 h. Moreover, Generative Adversarial Network (GAN) efficiently enhanced the performance of deep learning models and DNN was chosen as the best predictive approach with MSE values equal to 0.00098 and 0.00182 for the drug release and permeation kinetics, respectively. DNN precisely predicted PX dissolution profiles with f2 values equal to 99.99 for all the formulations.

Matched MeSH terms: Polysorbates
Pilot-scale production of lipase using palm oil mill effluent as a basal medium and its immobilization by selected materials

Asih DR, Alam MZ, Alam Z, Salleh MN, Salleh N, Salihu A

J Oleo Sci, 2014;63(8):779-85.
PMID: 25017863

A pilot-scale production of lipase using palm oil mill effluent (POME) as a fermentation basal medium was carried out, and parameters for immobilization of the produced lipase were optimized. Lipase production in a 300-L bioreactor was performed using two proposed strategies, constant power per volume (P/V) and constant tip speed. Moreover, lipase immobilization on different materials was also investigated. Lipase production was performed using liquid-state bioconversion of POME as the medium and Candida cylindracea as the inoculum. The fermentation medium was composed of 1% total suspended solids (TSS) of POME, 0.5% (w/v) peptone, 0.7% (v/v) Tween-80, and 2.2% inoculum. The medium composition was decided on the basis of the medium optimization results of a previous study. The fermentation was carried out for 48 h at 30°C and pH 6. The maximum lipase production was 5.72U/mL and 21.34 U/mL, obtained from the scale-up strategies of constant tip speed and P/V, respectively. Four accessible support materials were screened for their potential use in immobilization. The most suitable support material was found to be activated carbon, with a maximum immobilization of 94%.

Matched MeSH terms: Polysorbates

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links