Displaying publications 2021 - 2040 of 10540 in total

Abstract:
Sort:
  1. Extraction, characterization and application of malva nut gum in water treatment
    Ho YC, Norli I, Alkarkhi AF, Morad N
    J Water Health, 2015 Jun;13(2):489-99.
    PMID: 26042980 DOI: 10.2166/wh.2014.100
    In view of green developments in water treatment, plant-based flocculants have become the focus due to their safety, degradation and renewable properties. In addition, cost and energy-saving processes are preferable. In this study, malva nut gum (MNG), a new plant-based flocculant, and its composite with Fe in water treatment using single mode mixing are demonstrated. The result presents a simplified extraction of the MNG process. MNG has a high molecular weight of 2.3 × 10⁵ kDa and a high negative charge of -58.7 mV. From the results, it is a strong anionic flocculant. Moreover, it is observed to have a branch-like surface structure. Therefore, it conforms to the surface of particles well and exhibits good performance in water treatment. In water treatment, the Fe-MNG composite treats water at pH 3.01 and requires a low concentration of Fe and MNG of 0.08 and 0.06 mg/L, respectively, when added to the system. It is concluded that for a single-stage flocculation process, physico-chemical properties such as molecular weight, charge of polymer, surface morphology, pH, concentration of cation and concentration of biopolymeric flocculant affect the flocculating performance.
    Matched MeSH terms: Iron/chemistry; Resins, Plant/chemistry*; Seeds/chemistry*; Water Pollutants, Chemical/chemistry*; Malvaceae/chemistry*
  2. Venuloxanthone, a new pyranoxanthone from the stem bark of Calophyllum venulosum
    Bin Ismail AA, Ee GC, Bin Daud S, Teh SS, Hashim NM, Awang K
    J Asian Nat Prod Res, 2015;17(11):1104-8.
    PMID: 26023810 DOI: 10.1080/10286020.2015.1047353
    A new pyranoxanthone, venuloxanthone (1), was isolated from the stem bark of Calophyllum venulosum, together with three other xanthones, tovopyrifolin C (2), ananixanthone (3) and caloxanthone I (4), along with two common triterpenes, friedelin (5) and lupeol (6). The structures of these compounds were identified using several spectroscopic analyses which are NMR, GCMS and FTIR experiments.
    Matched MeSH terms: Pyrans/chemistry; Triterpenes/chemistry; Plant Bark/chemistry; Calophyllum/chemistry*; Xanthones/chemistry
  3. Comparison of free amino acids, antioxidants, soluble phenolic acids, cytotoxicity and immunomodulation of fermented mung bean and soybean
    Ali NM, Yeap SK, Yusof HM, Beh BK, Ho WY, Koh SP, et al.
    J Sci Food Agric, 2016 Mar 30;96(5):1648-58.
    PMID: 26009985 DOI: 10.1002/jsfa.7267
    BACKGROUND: Mung bean and soybean have been individually reported previously to have antioxidant, cytotoxic and immunomodulatory effects, while fermentation is a well-known process to enhance the bioactive compounds that contribute to higher antioxidant, cytotoxic and immunomodulation effects. In this study, the free amino acids profile, soluble phenolic acids content, antioxidants, cytotoxic and immunomodulatory effects of fermented and non-fermented mung bean and soybean were compared.

    RESULTS: Fermented mung bean was recorded to have the highest level of free amino acids, soluble phenolic acids (especially protocatechuic acid) and antioxidant activities among all the tested products. Both fermented mung bean and soybean possessed cytotoxicity activities against breast cancer MCF-7 cells by arresting the G0/G1 phase followed by apoptosis. Moreover, fermented mung bean and soybean also induced splenocyte proliferation and enhanced the levels of serum interleukin-2 and interferon-γ.

    CONCLUSION: Augmented amounts of free amino acids and phenolic acids content after fermentation enhanced the antioxidants, cytotoxicity and immunomodulation effects of mung bean and soybean. More specifically, fermented mung bean showed the best effects among all the tested products. This study revealed the potential of fermented mung bean and soybean as functional foods for maintenance of good health.

    Matched MeSH terms: Amino Acids/chemistry*; Antioxidants/chemistry*; Soybeans/chemistry*; Hydroxybenzoates/chemistry*; Vigna/chemistry*
  4. Fulltext Response Surface Methodology for the Optimization of Preparation of Biocomposites Based on Poly(lactic acid) and Durian Peel Cellulose
    Penjumras P, Rahman RA, Talib RA, Abdan K
    ScientificWorldJournal, 2015;2015:293609.
    PMID: 26167523 DOI: 10.1155/2015/293609
    Response surface methodology was used to optimize preparation of biocomposites based on poly(lactic acid) and durian peel cellulose. The effects of cellulose loading, mixing temperature, and mixing time on tensile strength and impact strength were investigated. A central composite design was employed to determine the optimum preparation condition of the biocomposites to obtain the highest tensile strength and impact strength. A second-order polynomial model was developed for predicting the tensile strength and impact strength based on the composite design. It was found that composites were best fit by a quadratic regression model with high coefficient of determination (R (2)) value. The selected optimum condition was 35 wt.% cellulose loading at 165°C and 15 min of mixing, leading to a desirability of 94.6%. Under the optimum condition, the tensile strength and impact strength of the biocomposites were 46.207 MPa and 2.931 kJ/m(2), respectively.
    Matched MeSH terms: Biocompatible Materials/chemistry*; Cellulose/chemistry*; Polymers/chemistry*; Lactic Acid/chemistry*; Bombacaceae/chemistry*
  5. Mechanical and physical behavior of newly developed functionally graded materials and composites of stainless steel 316L with calcium silicate and hydroxyapatite
    Ataollahi Oshkour A, Pramanik S, Mehrali M, Yau YH, Tarlochan F, Abu Osman NA
    J Mech Behav Biomed Mater, 2015 Sep;49:321-31.
    PMID: 26072197 DOI: 10.1016/j.jmbbm.2015.05.020
    This study aimed to investigate the structural, physical and mechanical behavior of composites and functionally graded materials (FGMs) made of stainless steel (SS-316L)/hydroxyapatite (HA) and SS-316L/calcium silicate (CS) employing powder metallurgical solid state sintering. The structural analysis using X-ray diffraction showed that the sintering at high temperature led to the reaction between compounds of the SS-316L and HA, while SS-316L and CS remained intact during the sintering process in composites of SS-316L/CS. A dimensional expansion was found in the composites made of 40 and 50 wt% HA. The minimum shrinkage was emerged in 50 wt% CS composite, while the maximum shrinkage was revealed in samples with pure SS-316L, HA and CS. Compressive mechanical properties of SS-316L/HA decreased sharply with increasing of HA content up to 20 wt% and gradually with CS content up to 50 wt% for SS-316L/CS composites. The mechanical properties of the FGM of SS-316L/HA dropped with increase in temperature, while it was improved for the FGM of SS-316L/CS with temperature enhancement. It has been found that the FGMs emerged a better compressive mechanical properties compared to both the composite systems. Therefore, the SS-316L/CS composites and their FGMs have superior compressive mechanical properties to the SS-316L/HA composites and their FGMs and also the newly developed FGMs of SS-316L/CS with improved mechanical and enhanced gradation in physical and structural properties can potentially be utilized in the components with load-bearing application.
    Matched MeSH terms: Biocompatible Materials/chemistry*; Stainless Steel/chemistry*; Calcium Compounds/chemistry*; Silicates/chemistry*; Durapatite/chemistry*
  6. Fulltext A comparative effect of various surface chemical treatments on the resin composite-composite repair bond strength
    Gupta S, Parolia A, Jain A, Kundabala M, Mohan M, de Moraes Porto IC
    J Indian Soc Pedod Prev Dent, 2015 Jul-Sep;33(3):245-9.
    PMID: 26156281 DOI: 10.4103/0970-4388.160402
    The aim of this in vitro study was an attempt to investigate the effect of different surface treatments on the bond strength between pre-existing composite and repair composite resin.
    Matched MeSH terms: Composite Resins/chemistry*; Hydrofluoric Acid/chemistry*; Maleates/chemistry; Phosphoric Acids/chemistry; Citric Acid/chemistry
  7. Sulfonated methyl esters of fatty acids in aqueous solutions: Interfacial and micellar properties
    Danov KD, Stanimirova RD, Kralchevsky PA, Basheva ES, Ivanova VI, Petkov JT
    J Colloid Interface Sci, 2015 Nov 1;457:307-18.
    PMID: 26196714 DOI: 10.1016/j.jcis.2015.07.020
    The interest to sulfonated methyl esters of fatty acids (SME) has been growing during the last decade, because these surfactants are considered as an environmentally friendly and renewable alternative of the linear alkyl-benzene sulfonates (LAS). Here, we present a quantitative study on the properties of aqueous SME solutions, and especially on their surface tension isotherms, critical micelle concentration (CMC) and its dependence on the concentration of added NaCl. It is demonstrated that the CMC of an ionic surfactant determined by electrical conductivity is insensitive to the presence of a small nonionic admixture, so that the CMC values determined by conductivity represent the CMC of the pure surfactant. Using SME as an example, we have demonstrated the application of a new and powerful method for determining the physicochemical parameters of the pure ionic surfactant by theoretical data analysis ("computer purification") if the used surfactant sample contains nonionic admixtures, which are present as a rule. This method involves fits of the experimental data for surface tension and conductivity by a physicochemical model based on a system of mass-balance, chemical-equilibrium and electric-double-layer equations, which allows us to determine the adsorption and micellization parameters of C12-, C14-, C16- and C18-SME, as well the fraction of nonionic admixtures (if any). Having determined these parameters, we can further predict the interfacial and micellization properties of the surfactant solutions, such as surface tension, adsorption, degree of counterion binding, and surface electric potential at every surfactant, salt and co-surfactant concentrations.
    Matched MeSH terms: Esters/chemistry*; Fatty Acids/chemistry*; Sulfonic Acids/chemistry*; Surface-Active Agents/chemistry; Water/chemistry
  8. Fulltext Mechanisms of gastroprotection of methanol extract of Melastoma malabathricum leaves
    Zakaria ZA, Balan T, Mamat SS, Mohtarrudin N, Kek TL, Salleh MZ
    BMC Complement Altern Med, 2015;15:135.
    PMID: 25927982 DOI: 10.1186/s12906-015-0638-z
    Melastoma malabathricum L. (Melastomaceae) is a small shrub with various medicinal uses. The present study was carried out to determine the gastroprotective mechanisms of methanol extract of M. malabathricum leaves (MEMM) in rats.
    Matched MeSH terms: Methanol/chemistry; Plant Extracts/chemistry; Plant Leaves/chemistry; Protective Agents/chemistry; Melastomataceae/chemistry*
  9. TiO₂ nanoparticle transport and retention through saturated limestone porous media under various ionic strength conditions
    Esfandyari Bayat A, Junin R, Derahman MN, Samad AA
    Chemosphere, 2015 Sep;134:7-15.
    PMID: 25889359 DOI: 10.1016/j.chemosphere.2015.03.052
    The impact of ionic strength (from 0.003 to 500mM) and salt type (NaCl vs MgCl2) on transport and retention of titanium dioxide (TiO2) nanoparticles (NPs) in saturated limestone porous media was systematically studied. Vertical columns were packed with limestone grains. The NPs were introduced as a pulse suspended in aqueous solutions and breakthrough curves in the column outlet were generated using an ultraviolent-visible spectrometry. Presence of NaCl and MgCl2 in the suspensions were found to have a significant influence on the electrokinetic properties of the NP aggregates and limestone grains. In NaCl and MgCl2 solutions, the deposition rates of the TiO2-NP aggregates were enhanced with the increase in ionic strength, a trend consistent with traditional Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Furthermore, the NP aggregates retention increased in the porous media with ionic strength. The presence of salts also caused a considerable delay in the NPs breakthrough time. MgCl2 as compared to NaCl was found to be more effective agent for the deposition and retention of TiO2-NPs. The experimental results followed closely the general trends predicted by the filtration and DLVO calculations. Overall, it was found that TiO2-NP mobility in the limestone porous media depends on ionic strength and salt type.
    Matched MeSH terms: Colloids/chemistry; Electrochemistry; Sodium Chloride/chemistry; Titanium/chemistry*; Magnesium Chloride/chemistry; Metal Nanoparticles/chemistry*
  10. Improving protein production of indigenous microalga Chlorella vulgaris FSP-E by photobioreactor design and cultivation strategies
    Chen CY, Lee PJ, Tan CH, Lo YC, Huang CC, Show PL, et al.
    Biotechnol J, 2015 Jun;10(6):905-14.
    PMID: 25865941 DOI: 10.1002/biot.201400594
    Fish meal is currently the major protein source for commercial aquaculture feed. Due to its unstable supply and increasing price, fish meal is becoming more expensive and its availability is expected to face significant challenges in the near future. Therefore, feasible alternatives to fish meal are urgently required. Microalgae have been recognized as the most promising candidates to replace fish meal because the protein composition of microalgae is similar to fish meal and the supply of microalgae-based proteins is sustainable. In this study, an indigenous microalga (Chlorella vulgaris FSP-E) with high protein content was selected, and its feasibility as an aquaculture protein source was explored. An innovative photobioreactor (PBR) utilizing cold cathode fluorescent lamps as an internal light source was designed to cultivate the FSP-E strain for protein production. This PBR could achieve a maximum biomass and protein productivity of 699 and 365 mg/L/day, respectively, under an optimum urea and iron concentration of 12.4 mM and 90 μM, respectively. In addition, amino acid analysis of the microalgal protein showed that up to 70% of the proteins in this microalgal strain consist of indispensable amino acids. Thus, C. vulgaris FSP-E appears to be a viable alternative protein source for the aquaculture industry.
    Matched MeSH terms: Iron/chemistry; Plant Proteins/chemistry; Urea/chemistry; Chlorella vulgaris/chemistry; Microalgae/chemistry
  11. Aerobic sludge granulation at high temperatures for domestic wastewater treatment
    Ab Halim MH, Nor Anuar A, Azmi SI, Jamal NS, Wahab NA, Ujang Z, et al.
    Bioresour Technol, 2015 Jun;185:445-9.
    PMID: 25851807 DOI: 10.1016/j.biortech.2015.03.024
    With inoculum sludge from a conventional activated sludge wastewater treatment plant, three sequencing batch reactors (SBRs) fed with synthetic wastewater were operated at different high temperatures (30, 40 and 50±1°C) to study the formation of aerobic granular sludge (AGS) for simultaneous organics and nutrients removal with a complete cycle time of 3h. The AGS were successfully cultivated with influent loading rate of 1.6CODg(Ld)(-1). The COD/N ratio of the influent wastewater was 8. The results revealed that granules developed at 50°C have the highest average diameter, (3.36mm) with 98.17%, 94.45% and 72.46% removal efficiency observed in the system for COD, ammonia and phosphate, respectively. This study also demonstrated the capabilities of AGS formation at high temperatures which is suitable to be applied for hot climate conditions.
    Matched MeSH terms: Ammonia/chemistry; Organic Chemicals/chemistry; Phosphates/chemistry; Sewage/chemistry*; Water Pollutants/chemistry*
  12. Fulltext Synthesis of waste cooking oil based biodiesel via ferric-manganese promoted molybdenum oxide / zirconia nanoparticle solid acid catalyst: influence of ferric and manganese dopants
    Alhassan FH, Rashid U, Taufiq-Yap YH
    J Oleo Sci, 2015;64(5):505-14.
    PMID: 25843280 DOI: 10.5650/jos.ess14228
    The utilization of ferric-manganese promoted molybdenum oxide/zirconia (Fe-Mn- MoO3/ZrO2) (FMMZ) solid acid catalyst for production of biodiesel was demonstrated. FMMZ is produced through impregnation reaction followed by calcination at 600°C for 3 h. The characterization of FMMZ had been done using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), thermal gravimetric analysis (TGA), temperature programmed desorption of NH3 (TPD-NH3), transmission electron microscopy(TEM) and Brunner-Emmett-Teller (BET) surface area measurement. The effect of waste cooking oil methyl esters (WCOME's) yield on the reactions variables such as reaction temperature, catalyst loading, molar ratio of methanol/oil and reusability were also assessed. The catalyst was used to convert the waste cooking oil into corresponding methyl esters (95.6%±0.15) within 5 h at 200℃ reaction temperature, 600 rpm stirring speed, 1:25 molar ratio of oil to alcohol and 4% w/w catalyst loading. The reported catalyst was successfully recycled in six connective experiments without loss in activity. Moreover, the fuel properties of WCOME's were also reported using ASTM D 6751 methods.
    Matched MeSH terms: Ferric Compounds/chemistry*; Manganese/chemistry; Molybdenum/chemistry*; Oxides/chemistry*; Zirconium/chemistry*
  13. Removal of fluoride ion from aqueous solution by a cerium-poly(hydroxamic acid) resin complex
    Haron MJ, Yunus WM
    J Environ Sci Health A Tox Hazard Subst Environ Eng, 2001 May;36(5):727-34.
    PMID: 11460327
    A cerium-loaded poly(hydroxamic acid) chelating ion exchanger was used for fluoride ion removal from aqueous solution. The resin was effective in decreasing the fluoride concentration from 5 mM down to 0.001 mM in acidic pH between 3 and 6. The sorption followed a Langmuir model with a maximum capacity of 0.5 mmol/g. The removal is accomplished by an anion exchange mechanism. The rate constant for the sorption was found to be 9.6 x 10(-2) min-1. A column test shows that the fluoride ion was retained on the column until breakthrough point and the fluoride sorbed in the column can be eluted with 0.1 M NaOH. The column can be reused after being condition with hydrochloric acid at pH 4. The resin was tested and found to be effective for removal of fluoride from actual industrial wastewater.
    Matched MeSH terms: Cerium/chemistry*; Chelating Agents/chemistry*; Fluorides/chemistry*; Hydroxamic Acids/chemistry*; Resins, Plant/chemistry
  14. Heavy metals removal in fixed-bed column by the macro fungus Pycnoporus sanguineus
    Zulfadhly Z, Mashitah MD, Bhatia S
    Environ Pollut, 2001;112(3):463-70.
    PMID: 11291452
    The ability of Pycnoporus sanguineus to adsorb heavy metals from aqueous solution was investigated in fixed-bed column studies. The experiments were conducted to study the effect of important design parameters such as column bed height, flow rate and initial concentration of solution. The breakthrough profiles were obtained in these studies. A mathematical model based on external mass transfer and pore diffusion was used for the prediction of mass transfer coefficient and effective diffusivity of metals in macro-fungi bed. Experimental breakthrough profiles were compared with the simulated breakthrough profiles obtained from the mathematical model. Bed Depth Service Time (BDST) model was used to analyse the experimental data and evaluated the performance of biosorption column. The BDST model parameters needed for the design of biosorption columns were evaluated for lead, copper and cadmium removal in the column. The columns were regenerated by eluting the metal ions using 0.1 M hydrochloric acid solution after the adsorption studies. The columns were subjected to repeated cycles of adsorption of same metal ions and desorption to evaluate the removal efficiency after adsorption-desorption.
    Matched MeSH terms: Cadmium/chemistry; Copper/chemistry; Lead/chemistry; Polyporaceae/chemistry; Metals, Heavy/chemistry
  15. Minor methylated pyranoamentoflavones from Calophyllum venulosum
    Cao SG, Sim KY, Goh SH
    Nat Prod Lett, 2001;15(5):291-7.
    PMID: 11841112
    Two new biflavonoids, pyranoamentoflavone 7-methyl ether (1) and pyranoamentoflavone 4'-methyl ether (2), have been isolated from the leaves of Calophyllum venulosum. The structures of these two new compounds were elucidated by spectroscopic data.
    Matched MeSH terms: Chemistry, Physical; Flavonoids/chemistry; Plants, Medicinal/chemistry*; Plant Leaves/chemistry; Calophyllum/chemistry*
  16. Iridoids from Rothmannia macrophylla
    Ling SK, Tanaka T, Kouno I
    J Nat Prod, 2001 Jun;64(6):796-8.
    PMID: 11421747
    A new iridoid glucoside with an ether linkage between C-3 and C-10 and a novel nonglycosidic iridoid with an ether linkage between C-3 and C-6 and a lactonic linkage at C-1, named macrophylloside (1) and macrophyllide (2), respectively, were isolated from the leaves of Rothmannia macrophylla, along with six known iridoids. Their structures were established by NMR and MS spectroscopies.
    Matched MeSH terms: Ethers/chemistry*; Glucosides/chemistry*; Plants, Medicinal/chemistry*; Pyrans/chemistry*; Plant Leaves/chemistry
  17. Investigation of interpolymer complexation between Carbopol and various grades of polyvinylpyrrolidone and effects on adhesion strength and swelling properties
    Tan YT, Peh KK, Al-Hanba O
    J Pharm Pharm Sci, 2001 Jan-Apr;4(1):7-14.
    PMID: 11302785
    To investigate the interpolymer complexation between Carbopol 934P (CP) and various grades of polyvinylpyrrolidone (PVP) (K90, K32, C15, and VA/S-630).
    Matched MeSH terms: Drug Carriers/chemistry*; Polyvinyls/chemistry*; Povidone/chemistry*; Protease Inhibitors/chemistry; Water/chemistry
  18. The use of Mg/Al layered double hydroxide for color removal of textile wastewater
    Hussein MZ, Zainal Z, Yaziz I, Beng TC
    J Environ Sci Health A Tox Hazard Subst Environ Eng, 2001;36(4):565-73.
    PMID: 11413839
    Layered double hydroxide of Mg-Al-carbonate system (MACH) was prepared and its heat-treated product (MACHT) was obtained by calcination at 500 degrees C. The resulting materials were used as an adsorbent for removal of color from synthetic textile wastewater (STW) and textile wastewater (TWW). Batch kinetic study showed that these materials are an efficient adsorbent for textile dye. The maximum adsorption capacities between 16 to 32 mg of dyes per g of adsorbent was obtained by fitting the adsorption data to the Langmuir adsorption Isotherm. It was found that the adsorption capacity of MACHT is higher than MACH.
    Matched MeSH terms: Aluminum/chemistry*; Carbonates/chemistry; Coloring Agents/chemistry*; Hydroxides/chemistry; Magnesium/chemistry*
  19. Removal of chromium (III) from aqueous solution using chrome sludge
    Low KS, Lee CK, Ow-Wee ST
    Bull Environ Contam Toxicol, 1995 Aug;55(2):270-5.
    PMID: 7579934
    Matched MeSH terms: Cadmium/chemistry; Copper/chemistry; Lead/chemistry; Nickel/chemistry; Zinc/chemistry
  20. Mapping of domains responsible for nucleocapsid protein-phosphoprotein interaction of Henipaviruses
    Chan YP, Koh CL, Lam SK, Wang LF
    J Gen Virol, 2004 Jun;85(Pt 6):1675-1684.
    PMID: 15166452 DOI: 10.1099/vir.0.19752-0
    Hendra virus (HeV) and Nipah virus (NiV) are members of a new genus, Henipavirus, in the family paramyxoviridae. Each virus encodes a phosphoprotein (P) that is significantly larger than its counterparts in other known paramyxoviruses. The interaction of this unusually large P with its nucleocapsid protein (N) was investigated in this study by using recombinant full-length and truncated proteins expressed in bacteria and a modified protein-blotting protein-overlay assay. Results from our group demonstrated that the N and P of both viruses were able to form not only homologous, but also heterologous, N-P complexes, i.e. HeV N was able to interact with NiV P and vice versa. Deletion analysis of the N and P revealed that there were at least two independent N-binding sites on P and they resided at the N and C termini, respectively. Similarly, more than one P-binding site was present on N and one of these was mapped to a 29 amino acid (aa) C-terminal region, which on its own was sufficient to interact with the extreme C-terminal 165 aa region of P.
    Matched MeSH terms: Phosphoproteins/chemistry*; Recombinant Proteins/chemistry; Viral Proteins/chemistry*; Nucleocapsid Proteins/chemistry*; Henipavirus/chemistry*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links