This paper reports the synthesis of two-dimensional, hierarchical, porous, and (001)-faceted metal (Ag, Zn, and Al)-doped TiO2 nanostructures (TNSs) and the study of their photocatalytic activity. Two-dimensional metal-doped TNSs were synthesized using the hydrolysis of ammonium hexafluorotitanate in the presence of hexamethylenetetramine and metal precursors. Typical morphology of metal-doped TNSs is a hierarchical nanosheet that is composed of randomly stacked nanocubes (dimensions of up to 5 μm and 200 nm in edge length and thickness, respectively) and has dominant (001) facets exposed. Raman analysis and X-ray photoelectron spectroscopy results indicated that the Ag doping, compared to Zn and Al, much improves the crystallinity degree and at the same time dramatically lowers the valence state binding energy of the TNS and provides an additional dopant oxidation state into the system for an enhanced electron-transfer process and surface reaction. These are assumed to enhance the photocatalytic of the TNS. In a model of photocatalytic reaction, that is, rhodamine B degradation, the AgTNS demonstrates a high photocatalytic activity by converting approximately 91% of rhodamine B within only 120 min, equivalent to a rate constant of 0.018 m-1 and ToN and ToF of 94 and 1.57 min-1, respectively, or 91.1 mmol mg-1 W-1 degradation when normalized to used light source intensity, which is approximately 2 times higher than the pristine TNS and several order higher when compared to Zn- and Al-doped TNSs. Improvement of the crystallinity degree, decrease in the defect density and the photogenerated electron and hole recombination, and increase of the oxygen vacancy in the AgTNS are found to be the key factors for the enhancement of the photocatalytic properties. This work provides a straightforward strategy for the preparation of high-energy (001) faceted, two-dimensional, hierarchical, and porous Ag-doped TNSs for potential use in photocatalysis and photoelectrochemical application.
Conocarpus lancifolius is a fast-growing and drought tolerant tree species with phytoremediation potential in arid environments. The present study was conducted to evaluate the phytoaccumulation potential under wastewater treatment. The experiment was performed in a greenhouse where 3-month-old seedlings were irrigated with industrial wastewater and growth, biomass and physiological parameters were measured. Concentrations of zinc (Zn), lead (Pb), and cadmium (Cd) in leaves, shoots, and roots along with translocation and tolerance index were also determined. The results showed that under wastewater treatment total biomass increased from 24.2 to 31.5 g, net CO2 assimilation rate increased from 9.93 to 13.3 μmol m-2 s-1, and water use efficiency increased from 1.7 to 2.42. Similarly, heavy metals (Zn, Pb, and Cd) accumulation in stem, leaves, and roots increased significantly under wastewater treatment where the highest concentration of Zn, Pb and Cd was found in roots followed by leaves and stem, respectively. Tolerance index was found >1, and translocation factor of all heavy metals was found >1. The study revealed that phytoaccumulation potential of C. lancifolius was mainly driven by improved net CO2 assimilation rate and water use efficiency.
Host induced control of pathogens involves, but not limited to, withholding of essential transition metals as well as releasing the metals at a toxic level. Zinc is one of these transition elements that plays critical role in controlling the pathogens in that manner – a key mediator in nutritional immunity. A number of subcellular and molecular mecha-nisms such as transport and storage proteins are known to maintain Zn homeostasis and scuffle with the pathogens. Pathogenic bacteria also use a number of mechanisms to combat the scuffle and fight for the right amount of Zn for their survival and growth. From the host perspective, a “delicate” balance of Zn must be maintained for immune surveillance while making the level of Zn either to starve or to intoxicate the pathogens. Metallothionein (MT), a group of low molecular weight proteins, is well known for its Zn transport and storage ability and is expected to play an important role in that nutritional immunity. Zn homeostasis by MT to fight oral pathogens is not unexpected too. Periodontitis and dental caries are two most common oral diseases which are linked to the pathogenic carnival of opportunistic bacteria. Can those culprits be exterminated through nutritional immunity using MT? Or could it be - those human hosts who become the easy prey of those pathogens lack inducible expression of MT in their oral tissues? The synthesis or degradation of MT in response to invading pathogens in oral tissues, the human-MT medi-ated Zn homeostasis in response to infectious insult in oral tissues are evident. Nonetheless, the cross talk between MT and Zn in oral nutritional immunity is largely unknown.
Removal of ciprofloxacin (CIP) pollutant from wastewater using conventional process is particularly challenging due to poor removal efficiency. In this work, CIP was photocatalytically degraded using a porous ZnO/SnS2 photocatalyst prepared via microwaves. The influence of process parameters (e.g., pH, catalyst mass and initial CIP concentration) and radical scavengers on visible-light induced degradation of CIP on the catalyst was investigated. From the study, it was found that visible-light induced degradation of CIP on ZnO/SnS2 is a surface-mediated process and the reaction kinetics followed the Langmuir-Hinshelwood first-order kinetics. It was found that the optimum condition for CIP degradation was at pH of 6.1 and catalyst dosage of 500 mg L-1. Higher catalyst dosage however led to a decline in reaction rate due to light scattering effect and reduction in light penetration.
This study is focused on the determination of trace metals (Cr, Cu, Zn, As, Pb, and Cd) concentrations of nine different indigenous fish species of Meghna River in Bangladesh to know the possible risk in human consumption. Fishes' wet muscles samples were analyzed to evaluate the level of trace metal concentrations. The concentrations (mg kg-1 w/w) of the six selected trace metals were in the order Zn (1.42 ± 0.12) > Cr (1.31 ± 0.08) > Cu (0.92 ± 0.09) > Pb (0.54 ± 0.07) > Cd (0.51 ± 0.07) > As (0.47 ± 0.02). The results revealed that all the selected trace metals were below the maximum permissible limits recommended by the reference standards. The fish species may pose no risk with respect to the Estimated Daily Intake (EDI). Target hazard quotient (THQ) values for Cr, Cu, Zn, Pb, and Cd in all the fish species were <1.0, except for As which is dominantly organic in fishes. Both adults and children are vulnerable to carcinogenic health threat due to Cd exposure.
The aim of this research is an evaluation of polyelectrolytes. In the application of zinc-iodine batteries (ZIBs), polyelectrolytes have high stability, good cationic exchange properties and high ionic conductivity. Polyelectrolytes are also cost-effective. Important component of ZIBs are cation exchange membranes (CEMs). CEMs prevent the crossover of iodine and polyiodide from zinc (Zn) electrodes. However, available CEMs are costly and have limited ionic conductivity at room temperature. CEMs are low-cost, have high stability and good cationic exchange properties. Herein, polyelectrolyte membranes prepared from carboxymethyl cellulose (CMC) and polyvinyl alcohol (PVA) are examined. It is seen that an increase in the ratio of PVA leads to enhanced ionic conductivity as well as increased iodine and polyiodide crossover. ZIBs using polyelectrolytes having 75:25 wt.% CMC/PVA and 50:50 wt.% CMC/PVA show decent performance and cycling stability. Due to their low-cost and other salient features, CMC/PVA polyelectrolytes prove they have the capacity for use as cation exchange separators in ZIBs.
Powdered-photocatalysis of organic wastewater is widely investigated, unfortunately not industrially implemented due to its high energy requirement. Interestingly, such issue may be alleviated via the elimination of mechanical stirring required. Core-shell ZnO-based photocatalysts were developed herein, subsequently demonstrated efficient photocatalytic activities in the absence of mechanical stirring. Results show that the developed SiO2-cored ZnO photocatalyst are highly crystalline, while significantly smaller than coreless, pure ZnO due to the multi-point crystallization prompted. Additionally, it is also inherited with considerable buoyancy ability from SiO2-core in the absence of mechanical stirring, concurrently rendered with UV-active properties due to its ZnO-shell. Experimentally, 55% of particles of ZnO_0.0025 (0.0025 mol of ZnO-deposition) were found stably suspended for 60 min in liquid substrate, as opposed to the instant-settling of pure ZnO particles. In term of photocatalytic activity, ZnO_0.01 manifested the best methylene blue (MB) degradation with 150 mL/min of O2-bubbling. 67.63% of MB was degraded with photocatalyst loading of 0.2 g/L after 120 min UV-irradiation, simultaneously recorded the highest pseudo-first order reaction constant of 9.636 × 10-3 min-1. As summary, the auto-suspending photocatalysis conceptualized in current study offers a high possibility in reducing energy requirement for photo-treatment of wastewater, hence advocating its industrialization potential in near future.
This article provides data regarding the performance of zinc sulphate as a coagulant for treating rubber industry wastewater. The effect of four factors on removal efficiency of nine parameters is investigated, namely: pH, mixing speed, dosage of coagulant (zinc sulphate) and retention time. Response surface methodology was used to investigate the effect of selected variables. The data obtained from face centered composite design (FCCD) were analyzed by using analysis of variance (ANOVA) and regression model to find the optimum operating conditions for the selected factors.
A study of heavy metal contents in freshwater snails from rice fields have been made. The results indicate that the levels of heavy metals, Pb, Cu, Zn and Cd, are low and within the permissible limit of Malaysian Food Regulations. The results can serve as background data for further reference.
We report growth of quaternary Cu2 ZnSnS4 (CZTS) thin films prepared by the electrochemical deposition from salt precursors containing Cu (II), Zn (II) and Sn (IV) metals. The influence of different sulfurization times t (t = 75, 90, 105, and 120 min) on the structural, compositional, morphological, and optical properties, as well as on the electrical properties is studied. The films sulfurized 2 hours showed a prominent kesterite phase with a nearly stoichiometric composition. Samples were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), and Raman and UV-VIS-NIR spectrometer at different stages of work. X-ray diffraction and Raman spectroscopy analyses confirmed the formation of phase-pure CZTS films. (FESEM) shows that compact and dense morphology and enhanced photo-sensitivity. STEM - EDS elemental map of CZTS cross-section confirms homogeneous distribution. From optical study, energy gap was enlarged with a changed sulfurization times in the range of 1.37-1.47 eV.
Anion passivation effect on metal-oxide nano-architecture offers a highly controllable platform for improving charge selectivity and extraction, with direct relevance to their implementation in hybrid solar cells. In current work, we demonstrated the incorporation of fluorine (F) as an anion dopant to address the defect-rich nature of ZnO nanorods (ZNR) and improve the feasibility of its role as electron acceptor. The detailed morphology evolution and defect engineering on ZNR were studied as a function of F-doping concentration (x). Specifically, the rod-shaped arrays of ZnO were transformed into taper-shaped arrays at high x. A hypsochromic shift was observed in optical energy band gap due to the Burstein-Moss effect. A substantial suppression on intrinsic defects in ZnO lattice directly epitomized the novel role of fluorine as an oxygen defect quencher. The results show that 10-FZNR/P3HT device exhibited two-fold higher power conversion efficiency than the pristine ZNR/P3HT device, primarily due to the reduced Schottky defects and charge transfer barrier. Essentially, the reported findings yielded insights on the functions of fluorine on (i) surface -OH passivation, (ii) oxygen vacancies (Vo) occupation and (iii) lattice oxygen substitution, thereby enhancing the photo-physical processes, carrier mobility and concentration of FZNR based device.
An air exposed single-chamber microbial fuel cell (SCMFC) using microalgal biocathodes was designed. The reactors were tested for the simultaneous biodegradation of real dye textile wastewater (RTW) and the generation of bioelectricity. The results of digital image processing revealed a maximum coverage area on the biocathodes by microalgal cells of 42%. The atmospheric and diffused CO2 could enable good algal growth and its immobilized operation on the cathode electrode. The biocathode-SCMFCs outperformed an open circuit voltage (OCV), which was 18%-43% higher than the control. Furthermore, the maximum volumetric power density achieved was 123.2 ± 27.5 mW m(-3). The system was suitable for the treatment of RTW and the removal/decrease of COD, colour and heavy metals. High removal efficiencies were observed in the SCMFCs for Zn (98%) and COD (92-98%), but the removal efficiencies were considerably lower for Cr (54-80%). We observed that this single chamber MFC simplifies a double chamber system. The bioelectrochemical performance was relatively low, but the treatment capacity of the system seems encouraging in contrast to previous studies. A proof-of-concept experiment demonstrated that the microalgal biocathode could operate in air exposed conditions, seems to be a promising alternative to a Pt cathode and is an efficient and cost-effective approach to improve the performance of single chamber MFCs.
The aim of this study was to determine the genotoxicity of a locally produced nanocomposite by Universiti Sains Malaysia, Malaysia using Comet assay. Stem cells from human exfoliated deciduous teeth (SHED) were treated with the nanocomposite at five different concentrations (0.006, 0.0125, 0.025, 0.05, and 0.1 mg/ml) along with concurrent negative (medium alone) and positive control (zinc sulfate heptahydrate) and incubated at 37°C for 24 hours in an incubator at 5% CO2. The tail moment was used to assess the extent of DNA damage. The tail moment for the group of SHED treated with nanocomposite (for all the five different concentrations) was not statistically significant as compared to the negative control, suggesting that the locally produced dental nanocomposite did not induce any DNA damage. Hence, it can be concluded that the locally produced nanocomposite is non-genotoxic on stem cells from human exfoliated deciduous teeth.
The effect of solid solution treatment on semisolid microstructure of Zn-22Al with developed dendrites was investigated. Zn-22Al is a zinc-based alloy with aluminium as its main alloying element. Producing Zn-22Al product by semisolid metal processing (SSM) offers significant advantages, such as reduction of macrosegregations, porosity and low forming efforts. Meanwhile, thermal and microstructure analyses of Zn-22Al alloy were studied using differential scanning calorimeter (DSC) and Olympus optical microscope. Solidus and liquidus of the alloy can be determined by DSC analysis. In addition, changes to the microstructures in response to solid solution treatments were also analyzed. The major effort of all the semi-solid technologies is the generation of small and spherical morphologies. Prior to the generation of spherical morphologies, the fine grains should be first produced. The as-cast samples were isothermally held at 315°C, ranging from 0.5 to 5 hours before they were partially re-melted at semisolid temperature of 438°C to produce solid globular grains structure in liquid matrix. The results indicated that a non-dendritic semisolid microstructure could not be obtained if the traditionally cast Zn-22Al alloy with developed dendrites was directly subjected to partial remelting. After solid solution treatment at 315°C, the black interdendritic eutectics were dissolved and gradually transformed into ß structure when the treatment time was increased. The microstructure of the solid solution treated sample changed into a small globular structure with the best shape factor of 0.9 and this corresponded to 40±16µm when the sample was treated for 3 hours, followed by directly partial remelting into its semi solid zone.
The coordination complexes of Co(II) and Zn(II) with Schiff bases derived from ophenylenediamine and substituted 2-hydroxybenzaldehyde were prepared. All compounds were characterized by Fourier transform infrared (FTIR) spectroscopy and Nuclear magnetic resonance (NMR) spectroscopy elemental analyzers. They were analyzed using impedance spectroscopy in the frequency range of 100Hz - 1MHz. L1 and L2 showed higher conductivity compared to their metal
complexes, which had values of 1.37 x 10-7 and 6.13 x 10-8S/cm respectively.
Cavendish (Musa paradisiaca L, cv cavendshii) and Dream (Musa acuminata colla. AAA, cv ‘Berangan’) banana flours were prepared from ripe fruits collected from eleven markets located in Penang, Malaysia. The mineral composition (Na, K, Ca, Mg, Cu, Fe, Mn, Zn) of the flour were analyzed by atomic absorption spectrophotometer and the data obtained were analyzed using logistic regression model. Ripe banana flours were rich source of K and a fair source of other minerals, however logistic regression model identified Mg as an indicator to discriminate between the two types of banana flour affording 100 % correct assignation. Based on this result, mineral analysis may be suggested as a method to authenticate ripe banana flour. This study also presents the usefulness of logistic regression technique for analysis and interpretation of complex data.
A study was conducted to quantitate the concentrations of heavy metals, such as Hg, Pb and Cd in eight species of marine fin fish caught off the coast of Langkawi Island in Malaysia, as well as in its waters. The same fish were also used to determine the content of nutritional minerals, such as copper (Cu), zinc (Zn), calcium (Ca), and manganese (Mn).Fish and water samples were collected from four different areas, namely (1) Main Jetty Pulau Tuba (MJPT), (2) Teluk Cempedak Jetty (TCJ), (3) Simpang Tiga Chian Lian (STCL) and (4) Main Jetty Kuah (MJK) around Langkawi Island. Results showed that for the vital elements, all species had higher concentration of Zn compared to other elements. For the toxic elements, lead (Pb) and mercury (Hg) were found to have lower concentration of the mean values than the permissible limits set by FAO/WHO (1984). However, cadmium (Cd) level was slightly higher than the permissible limit but was still acceptable according to the Malaysian Food Regulation (1985). It can be concluded that all fish species studied are safe to be consumed.
The study was conducted to determine the mineral contents of 20 species of marine fish and 4 species of shellfish from the west coast of Peninsular Malaysia.Overall, the contents of micro minerals in all samples were below the permissible limits; except for oyster; with copper slightly higher than the limit set by FAO/WHO (1984), but below the limit set by Malaysian Food Regulations (1985); and zinc content higher than the limit set by Malaysian Food Regulations (1985), but below the limit set by FAO/WHO (1984). Meanwhile for macro minerals, most samples contained comparable sodium contents, significantly lower of potassium contents, higher calcium contents, and extremely higher of magnesium contents compared to the common ranges reported in the literatures. All samples were good sources of micro and macro minerals and could provide multi-health benefits if consumed in recommended amounts.
The development of motor skills is fundamental to the continued movement and specific skills in the sport. The development of motor skills concurrent with their age allows them to acquire and master locomotor and object control skills through physical activity. This study aims to identify the gross motor developmental stage among six year old girls at the National Child Development Research Center, Universiti Pendidikan Sultan Idris. This study focuses on the level of gross motor development and the relationship between Gross Motor Quotient (GMQ and Body Mass Index (BMI) of the children. Gross motor development data was obtained using the Test of Gross Motor Development, Second Edition (TGMD-2). BMI data was determined from existing formula. The gross motor development of the children in this study was 95%. This is based on the percentile level of gross motor development (GMQ percentile). Pearson correlation analysis showed a negative relationship between GMQ and BMI for these children.
Wilson disease is an inherited metabolic disorder. It is an autosomal recessive disorder caused by mutation of ATP7B gene, which results in excessive accumulation of copper in the body and deposition in various organs. The clinical presentation varies and neuropsychiatric manifestations are common. It is a diagnostic challenge in the initial phase where it mimics other psychiatric conditions and the diagnosis of Wilson disease is based on a combination of laboratory tests and clinical features. Wilson disease treatment comprises of copper chelating therapy such as D-Penicillamine and zinc sulphate wheras the behavior and mood symptoms response well with atypical antipsychotic treatment. The present report illustrates two cases of Wilson disease in middle-aged patients. The first presentation involved changes in behavior and personality. There was some delay in making the diagnosis in the initial stage. Both cases were diagnosed to have Wilson disease after further investigations. Their condition improved with the combination of copper chelating agent and atypical antipsychotic. In conclusion, it emphasizes the awareness of psychiatric manifestations as the initial presentation of Wilson disease.