Displaying publications 321 - 340 of 663 in total

Abstract:
Sort:
  1. Khan MU, Jamshed SQ, Ahmad A, Bidin MA, Siddiqui MJ, Al-Shami AK
    J Clin Diagn Res, 2016 Feb;10(2):JE01-6.
    PMID: 27042482 DOI: 10.7860/JCDR/2016/15211.7169
    INTRODUCTION: One of the most important indications of complementary and alternative medicines (CAM) is in arthritis. The popularity of CAM in arthritis is consistently on the rise because of the potential side effects of the conventional therapy (Methotrexate) of arthritis. In view of this, it was important to summarize the information, for healthcare professionals and the patients, about the safety and effectiveness of various CAM use in arthritis.

    MATERIALS AND METHODS: This comprehensive review is based on the content derived through a thorough literature search using 5 electronic databases such as Science direct, Springer link, PubMed, Jet P and Google scholar. Equivalent terms in thesauruses or Medical Subject Heading (MeSH) browsers were used whenever possible. We included all the articles those are used CAM medications for the treatment of arthritis around the globe and searched for the required articles published in English in peer reviewed journals from January 1999 to February 2014. Reports were then arranged and analysed on the basis of country specific studies.

    RESULTS: Initially, a total of 156 articles were retrieved, after further screening, 27 articles were selected according to meet objectives of the study and those articles which did not qualify, were excluded. Seventeen appropriate studies were finally included in the review. Indeed most of the studies that fulfilled the objective of this review were carried out in US (n=8, 47%), then in India (n=2, 11.76%), UK (n=1, 5.88%), Canada (n=1, 5.88%), Australia (n=1, 5.88%), Korea (n=1, 5.88%), Thailand (n=1, 5.88%), Turkey (n=1, 5.88%) and Malaysia (n=1, 5.88%).

    CONCLUSION: The review revealed that family, friend, past experiences and lack of effectiveness of conventional therapy are the major factors that influenced patients' decision of initiating and persisting with CAM therapy. The review highlighted the need to conduct future studies by using some more specific health related outcome measures.

  2. Ahmad A, Khan MU, Gogoi LJ, Kalita M, Sikdar AP, Pandey S, et al.
    PLoS One, 2015;10(8):e0135767.
    PMID: 26296212 DOI: 10.1371/journal.pone.0135767
    INTRODUCTION: Japanese encephalitis (JE) is a major cause of high morbidity and mortality in several states across India. However, in 2014, a sharp rise was observed in the number of cases of JE in north-eastern Assam state, and 51% of the total cases of JE in India were reported from the Assam in the same year. In this regard, a study was conducted to evaluate the knowledge and attitudes of healthcare workers in Darrang, a district of Assam highly affected by JE.

    METHODS: A cross sectional study was conducted for 2 months among HCWs in the major district hospital of Darrang, Assam. A pre-tested, self-administered questionnaire was used to collect data from the participants. Convenience sampling approach was used to collect data from different departments of the hospitals. Descriptive and logistic regression analyses were used to express the results.

    RESULTS: The knowledge of HCWs regarding JE was poor with a mean knowledge score of 11.02±2.39 (out of 17), while their attitudes were positive with a mean attitudes score of 43.16± 2.47 (ranging from 13 to 52). Overall, 40.4% and 74.3% of participants demonstrated good knowledge and positive attitudes respectively. Cut-off score for good knowledge and positive attitudes toward JE was set as ≥12 and >40 respectively. Older participants (40-49 years) and experienced workers (>10 years) were significantly associated with good knowledge as compared to their referent group (p<0.05), while knowledge of nurses and other orderlies were significantly lower than physicians (p<0.01). Similar factors were associated with the positive attitudes of the participants with the exception of experience. Television was the major source of information regarding JE reported by HCWs (79%).

    CONCLUSION: Although the knowledge was not optimized, HCWs exhibited positive attitudes towards JE. Future research is required to design, implement and evaluate interventions to improve the knowledge of JE among HCWs.

  3. Liew JWY, Loh KS, Ahmad A, Lim KL, Wan Daud WR
    PLoS One, 2017;12(9):e0185313.
    PMID: 28957374 DOI: 10.1371/journal.pone.0185313
    Polymer electrolyte membranes based on the natural polymer κ-carrageenan were modified and characterized for application in electrochemical devices. In general, pure κ-carrageenan membranes show a low ionic conductivity. New membranes were developed by chemically modifying κ-carrageenan via phosphorylation to produce O-methylene phosphonic κ-carrageenan (OMPC), which showed enhanced membrane conductivity. The membranes were prepared by a solution casting method. The chemical structure of OMPC samples were characterized using Fourier transform infrared spectroscopy (FTIR), 1H nuclear magnetic resonance (1H NMR) spectroscopy and 31P nuclear magnetic resonance (31P NMR) spectroscopy. The conductivity properties of the membranes were investigated by electrochemical impedance spectroscopy (EIS). The characterization demonstrated that the membranes had been successfully produced. The ionic conductivity of κ-carrageenan and OMPC were 2.79 × 10-6 S cm-1 and 1.54 × 10-5 S cm-1, respectively. The hydrated membranes showed a two orders of magnitude higher ionic conductivity than the dried membranes.
  4. Yaqoob AA, Ibrahim MNM, Rafatullah M, Chua YS, Ahmad A, Umar K
    Materials (Basel), 2020 May 01;13(9).
    PMID: 32369902 DOI: 10.3390/ma13092078
    The recycling and treatment of wastewater using microbial fuel cells (MFCs) has been attracting significant attention as a way to control energy crises and water pollution simultaneously. Despite all efforts, MFCs are unable to produce high energy or efficiently treat pollutants due to several issues, one being the anode's material. The anode is one of the most important parts of an MFC. Recently, different types of anode materials have been developed to improve the removal rate of pollutants and the efficiency of energy production. In MFCs, carbon-based materials have been employed as the most commonly preferred anode material. An extensive range of potentials are presently available for use in the fabrication of anode materials and can considerably minimize the current challenges, such as the need for high quality materials and their costs. The fabrication of an anode using biomass waste is an ideal approach to address the present issues and increase the working efficiency of MFCs. Furthermore, the current challenges and future perspectives of anode materials are briefly discussed.
  5. Ahmad A, Zulaily N, Shahril MR, Syed Abdullah EFH, Ahmed A
    PLoS One, 2018;13(7):e0200577.
    PMID: 30044842 DOI: 10.1371/journal.pone.0200577
    The epidemic of obesity in developed countries is commonly associated with poor dietary habit and sedentary lifestyle. However, other determinants, including education background and family income, may contribute towards the problem especially in developing countries. This study aimed to determine the influence of socioeconomic status (SES) on obesity among 12-year-old school adolescents in Terengganu, Malaysia. Body weight and height were measured and BMI was categorised based on WHO z-score cut-off points. Information was obtained from self-reported questionnaire on parents' education background, family income and occupation. A total of 3,798 school adolescents aged 12 years (44% boys and 56% girls) were recruited. There was no significant difference in BMI status between boys and girls, or between rural and urban participants. There were significant differences between BMI categories and gender, household income and SES level within rural areas. In the urban areas, significant differences were found between BMI categories and gender, parents' occupational and educational level, household income and size, and SES level. A logistic regression model found several SES factors to be predictors of obesity in this population, namely, gender, household size, father's occupation level, household income level and SES level. Each component of SES has been significantly associated with the BMI category of school adolescents, particularly in the urban areas. This suggests the requirement of multifaceted approaches, including the role of family, society and authorities, in the effort to curtail adolescent obesity.
  6. Patel I, Rarus R, Tan X, Lee EK, Guy J, Ahmad A, et al.
    Indian J Pharmacol, 2015;47(6):585-93.
    PMID: 26729947 DOI: 10.4103/0253-7613.169592
    Comparative effectiveness research (CER) is an important branch of pharmacoeconomics that systematically studies and evaluates the cost-effectiveness of medical interventions. CER plays instrumental roles in guiding government public health policy programs and insurance. Countries throughout the world use different methods of CER to help make medical decisions based on providing optimal therapy at a reduced cost. Expenses to the healthcare system continue to rise, and CER is one-way in which expenses could be curbed in the future by applying cost-effectiveness evidence to clinical decisions. China, India, South Korea, and the United Kingdom are of essential focus because these country's economies and health care expenses continue to expand. The structures and use of CER are diverse throughout these countries, and each is of prime importance. By conducting this thorough comparison of CER in different nations, strategies and organizational setups from different countries can be applied to help guide public health and medical decision-making in order to continue to expand the establishment and role of CER programs. The patient-centered medical home has been created to help reduce costs in the primary care sector and to help improve the effectiveness of therapy. Barriers to CER are also important as many stakeholders need to be able to work together to provide the best CER evidence. The advancement of CER in multiple countries throughout the world provides a possible way of reducing costs to the healthcare system in an age of expanding expenses.
  7. Ibrahim NNN, Nasir NM, Sahrani FK, Ahmad A, Sairi F
    Vet World, 2021 Mar;14(3):678-688.
    PMID: 33935414 DOI: 10.14202/vetworld.2021.678-688
    BACKGROUND AND AIM: Shewanella algae is ubiquitous in marine-associated environments and has been increasingly recognized as a significant human pathogen that can cause serious infections mainly associated with exposure to seawater and ingestion of raw seafood. This study aimed to isolate and characterize S. algae from ballast water of ships berthed at Port Klang, Malaysia.

    MATERIALS AND METHODS: Ballast water was sampled from nine ships docked at Port Klang, Malaysia. The isolates were identified and characterized based on biochemical and enzymatic properties, 16S rRNA and gyrB sequencing, biofilm formation capability, and antibiotic susceptibility.

    RESULTS: A total of four S. algae isolates were isolated from four ballast water samples tentatively name Sa-BW1, Sa-BW2, Sa-BW7, and Sa-BW8. All isolates showed positive reaction for cytochrome oxidase, catalase, high tolerance to NaCl (6% and 8%), ability to grow at 42°C, and on Salmonella-Shigella agar. The strains also exhibited b-hemolytic activity on sheep blood and human blood agar, positive reaction for lipase, protease, DNase and gelatinase, strong biofilm adherence capabilities and multiple antibiotic resistances against ampicillin, carbenicillin, cephalothin, colistin, novobiocin, oxacillin, penicillin, rifampicin, and tobramycin which suggested their potential pathogenicity.

    CONCLUSION: This study demonstrated the occurrence of putative pathogen S. algae in ballast water of ships docked at Malaysian port.

  8. Abu Hassan Shaari H, Ramli MM, Mohtar MN, Abdul Rahman N, Ahmad A
    Polymers (Basel), 2021 Jun 11;13(12).
    PMID: 34207932 DOI: 10.3390/polym13121939
    Poly(methyl methacrylate) (PMMA) is a lightweight insulating polymer that possesses good mechanical stability. On the other hand, polyaniline (PANi) is one of the most favorable conducting materials to be used, as it is easily synthesized, cost-effective, and has good conductivity. However, most organic solvents have restricted potential applications due to poor mechanical properties and dispersibility. Compared to PANi, PMMA has more outstanding physical and chemical properties, such as good dimensional stability and better molecular interactions between the monomers. To date, many research studies have focused on incorporating PANi into PMMA. In this review, the properties and suitability of PANi as a conducting material are briefly reviewed. The major parts of this paper reviewed different approaches to incorporating PANi into PMMA, as well as evaluating the modifications to improve its conductivity. Finally, the polymerization condition to prepare PMMA/PANi copolymer to improve its conductivity is also discussed.
  9. Abouzari-Lotf E, Jacob MV, Ghassemi H, Zakeri M, Nasef MM, Abdolahi Y, et al.
    Sci Rep, 2021 Feb 12;11(1):3764.
    PMID: 33580110 DOI: 10.1038/s41598-021-83161-9
    Two novel types of anion exchange membranes (AEMs) having imidazolium-type functionalised nanofibrous substrates were prepared using the facile and potentially scalable method. The membranes' precursors were prepared by graft copolymerization of vinylbenzyl chloride (VBC) onto syndiotactic polypropylene (syn-PP) and polyamide-66 (PA-66) nanofibrous networks followed by crosslinking with 1,8-octanediamine, thermal treatment and subsequent functionalisation of imidazolium groups. The obtained membranes displayed an ion exchange capacity (IEC) close to 1.9 mmol g-1 and ionic (OH-) conductivity as high as 130 mS cm-1 at 80 °C. This was coupled with a reasonable alkaline stability representing more than 70% of their original conductivity under accelerated degradation test in 1 M KOH at 80 °C for 360 h. The effect of ionomer binder on the performance of the membrane electrode assembly (MEA) in AEM fuel cell was evaluated with the optimum membrane. The MEA showed a power density of as high as 440 mW cm-2 at a current density is 910 mA cm-2 with diamine crosslinked quaternized polysulfone (DAPSF) binder at 80 °C with 90% humidified H2 and O2 gases. Such performance was 2.3 folds higher than the corresponding MEA performance with quaternary ammonium polysulfone (QAPS) binder at the same operating conditions. Overall, the newly developed membrane was found to possess not only an excellent combination of physico-chemical properties and a reasonable stability but also to have a facile preparation procedure and cheap ingredients making it a promising candidate for application in AEM fuel cell.
  10. Ahmad A, Li Z, Iqbal S, Aurangzeb M, Tariq I, Flah A, et al.
    Heliyon, 2024 Mar 15;10(5):e27392.
    PMID: 38495163 DOI: 10.1016/j.heliyon.2024.e27392
    Micro-expressions (ME) are rapidly occurring expressions that reveal the true emotions that a human being is trying to hide, cover, or suppress. These expressions, which reveal a person's actual feelings, have a broad spectrum of applications in public safety and clinical diagnosis. This study provides a comprehensive review of the area of ME recognition. A bibliometric and network analysis techniques is used to compile all the available literature related to ME recognition. A total of 735 publications from the Web of Science (WOS) and Scopus databases were evaluated from December 2012 to December 2022 using all relevant keywords. The first round of data screening produced some basic information, which was further extracted for citation, coupling, co-authorship, co-occurrence, bibliographic, and co-citation analysis. Additionally, a thematic and descriptive analysis was executed to investigate the content of prior research findings, and research techniques used in the literature. The year wise publications indicated that the published literature between 2012 and 2017 was relatively low but however by 2021, a nearly 24-fold increment made it to 154 publications. The three topmost productive journals and conferences included IEEE Transactions on Affective Computing (n = 20 publications) followed by Neurocomputing (n = 17) and Multimedia tools and applications (n = 15). Zhao G was the most proficient author with 48 publications and the top influential country was China (620 publications). Publications by citations showed that each of the authors acquired citations ranging from 100 to 1225. While publications by organizations indicated that the University of Oulu had the most published papers (n = 51). Deep learning, facial expression recognition, and emotion recognition were among the most frequently used terms. It has been discovered that ME research was primarily classified in the discipline of engineering, with more contribution from China and Malaysia comparatively.
  11. Siddique BM, Muhamad II, Ahmad A, Ayob A, Ibrahim MH, Ak MO
    J Food Sci Technol, 2015 Mar;52(3):1444-52.
    PMID: 25745212 DOI: 10.1007/s13197-013-1124-6
    The aim of this research was to determine the changes in the physicochemical properties of palm oil and its blends by FTIR and rheological measurements. Application of heat produces some chemical compounds as impurities and even toxic compounds in oils and fats that give absorbance at different region. FTIR spectra of pure palm olein shows an absorbance at 3002 cm(-1) whereas other pure oils show maximum absorption at around 3007 cm(-1) due to C-H stretching vibration of cis-double bond (=C-H). By blending of high unsaturated oils with palm olein, a clear shift of 3007 cm(-1) band to 3005 cm(-1) occurs. Viscosity of palm olein was found higher among all oils while it subsequently and substantially reduced by blending with other oils. Since it is a function of temperature, viscosity of pure oils and their blends decreases with the increase of temperature. The loss modulus (G''), for all oil blends before and after frying, in rheological experiment was found higher for all oils than the storage modulus (G'), therefore, the viscous property was found higher than elastic property of oils and blends. However, the critical stress for all oil blends was found higher than that of pure oils.
  12. Mie R, Samsudin MW, Din LB, Ahmad A, Ibrahim N, Adnan SN
    Int J Nanomedicine, 2014;9:121-7.
    PMID: 24379670 DOI: 10.2147/IJN.S52306
    Development of a green chemistry process for the synthesis of silver nanoparticles has become a focus of interest. This would offer numerous benefits, including ecofriendliness and compatibility for biomedical applications. Here we report the synthesis of silver nanoparticles from the reduction of silver nitrate and an aqueous extract of the lichen Parmotrema praesorediosum as a reductant as well as a stabilizer. The physical appearance of these silver nanoparticles was characterized using ultraviolet-visible spectroscopy, electron microscopy, energy-dispersive spectroscopy, and X-ray diffraction techniques. The results show that silver nanoparticles synthesized using P. praesorediosum have an average particle size of 19 nm with a cubic structure. The antibacterial activity of the synthesized silver nanoparticles was tested against eight micro-organisms using the disk diffusion method. The results reveal that silver nanoparticles synthesized using P. praesorediosum have potential antibacterial activity against Gram-negative bacteria.
  13. Mustafa NM, Jumaah FN, Ludin NA, Akhtaruzzaman M, Hassan NH, Ahmad A, et al.
    Heliyon, 2024 Apr 15;10(7):e27381.
    PMID: 38560257 DOI: 10.1016/j.heliyon.2024.e27381
    Tetraalkylammonium salt (TAS) is an organic salt widely employed as a precursor, additive or electrolyte in solar cell applications, such as perovskite or dye-sensitized solar cells. Notably, Perovskite solar cells (PSCs) have garnered acclaim for their exceptional efficiency. However, PSCs have been associated with environmental and health concerns due to the presence of lead (Pb) content, the use of hazardous solvents, and the incorporation of TAS in their fabrication processes, which significantly contributes to environmental and human health toxicity. As a response, there is a growing trend towards transitioning to safer and biobased materials in PSC fabrication to address these concerns. However, the potential health hazards associated with TAS necessitate a thorough evaluation, considering the widespread use of this substance. Nevertheless, the overexploitation of TAS could potentially increase the disposal of TAS in the ecosystem, thus, posing a major health risk and severe pollution. Therefore, this review article presents a comprehensive discussion on the in vitro and in vivo toxicity assays of TAS as a potential material in solar energy applications, including cytotoxicity, genotoxicity, in vivo dermal, and systemic toxicity. In addition, this review emphasizes the toxicity of TAS compounds, particularly the linear tetraalkyl chain structures, and summarizes essential findings from past studies as a point of reference for the development of non-toxic and environmentally friendly TAS derivatives in future studies. The effects of the TAS alkyl chain length, polar head and hydrophobicity, cation and anion, and other properties are also included in this review.
  14. Rehman MA, Abd Rahman N, Ibrahim ANH, Kamal NA, Ahmad A
    Heliyon, 2024 Apr 15;10(7):e28854.
    PMID: 38576554 DOI: 10.1016/j.heliyon.2024.e28854
    Soil erodibility (K) is an essential component in estimating soil loss indicating the soil's susceptibility to detach and transport. Data Computing and processing methods, such as artificial neural networks (ANNs) and multiple linear regression (MLR), have proven to be helpful in the development of predictive models for natural hazards. The present case study aims to assess the efficiency of MLR and ANN models to forecast soil erodibility in Peninsular Malaysia. A total of 103 samples were collected from various sites and K values were calculated using the Tew equation developed for Malaysian soil. From several extracted parameters, the outcomes of correlation and principal component analysis (PCA) revealed the influencing factors to be used in the development of ANN and MLR models. Based on the correlation and PCA results, two sets of influencing factors were employed to develop predictive models. Two MLR (MLR-1 and MLR-2) models and four neural networks (NN-1, NN-2, NN-3, and NN-4) optimized using Levenberg-Marquardt (LM) and scaled conjugate gradient (SCG) were developed and evaluated. The model performance validation was conducted using the coefficient of determination (R2), mean squared error (MSE), root mean squared error (RMSE), and Nash-Sutcliffe efficiency coefficient (NSE). The analysis showed that ANN models outperformed MLR models. The R2 values of 0.446 (MLR-1), 0.430 (MLR-2), 0.894 (NN-1), 0.855 (NN-2), 0.940 (NN-3), and 0.826 (NN-4); MSE values of 0.0000306 (MLR-1), 0.0000315 (MLR-2), 0.0000158 (NN-1), 0.0000261 (NN-2), 0.0000318 (NN-3), and 0.0000216 (NN-4) suggested the higher accuracy and lower modelling error of ANN models as compared with MLR. This study could provide an empirical basis and methodological support for K factor estimation in the region.
  15. Ahmad A, Khan MU, Kumar BD, Kumar GS, Rodriguez SP, Patel I
    Pharmacognosy Res, 2014 10 1;7(4):302-8.
    PMID: 26692742 DOI: 10.4103/0974-8490.158438
    OBJECTIVES: To assess the beliefs, attitudes and self-use of Ayurveda, Yoga and Naturopathy, Unani, Siddha, and Homeopathy (AYUSH) medicines among senior pharmacy students.

    METHODOLOGY: This was a descriptive cross-sectional study conducted among pharmacy students in four pharmacy schools located in Andhra Pradesh in South India. This study was conducted from the August to September 2014. The study population included all pharmacy students enrolled in Doctor of Pharmacy, Bachelor of Pharmacy and Diploma in Pharmacy programs in studied pharmacy schools. The pretested AYUSH survey had 8 questions on AYUSH related beliefs and 8 question on AYUSH related attitudes. The survey also asked participants about AYUSH related knowledge, frequency of use of AYUSH and the reason for using AYUSH. The data analysis was performed using SPSS Version 20. Chi-square test and Mann-Whitney U-test were employed to study the association between the independent and dependent variables.

    RESULTS: A total of 428 pharmacy students participated in the survey. 32.2% of the study population was females and 32.5% of the population resided in rural areas. Males were more likely to have positive beliefs about AYUSH when compared to females (odd ratio [OR] = 4.62, confidence interval [CI] = 2.37-8.99, P < 0.001). Similarly, students living in hostels were more positive in their beliefs about AYUSH compared with students living at home (OR = 2.14, CI = 1.12-4.07, P < 0.05). Students living in hostel also had a positive attitude about AYUSH use (OR = 1.74, CI = 1.03-2.93, P < 0.05).

    CONCLUSION: Pharmacy students held favorable attitude and beliefs about AYUSH use. This baseline survey provides important information about the pharmacy student's perception about AYUSH. Further research is needed to explore the reasons that shape the pharmacy student's beliefs and attitudes about AYUSH.

  16. Ahmad A, Bromberg DJ, Shrestha R, Salleh NM, Bazazi AR, Kamarulzaman A, et al.
    Int J Drug Policy, 2024 Apr;126:104369.
    PMID: 38484531 DOI: 10.1016/j.drugpo.2024.104369
    BACKGROUND: Incarcerated people with HIV and opioid-dependence often experience poor post-release outcomes in the absence of methadone maintenance treatment (MMT). In a prospective trial, we assessed the impact of methadone dose achieved within prison on linkage to MMT after release.

    METHODS: From 2010 to 2014, men with HIV (N = 212) and opioid dependence before incarceration were enrolled in MMT within 6 months of release from Malaysia's largest prison and followed for 12-months post-release. As a prospective trial, allocation to MMT was at random and later by preference design (predictive nonetheless). MMT dosing was individually targeted to minimally achieve 80 mg/day. Time-to-event analyses were conducted to model linkage to MMT after release.

    FINDINGS: Of the 212 participants allocated to MMT, 98 (46 %) were prescribed higher dosages (≥80 mg/day) before release. Linkage to MMT after release occurred in 77 (36 %) participants and significantly higher for those prescribed higher dosages (46% vs 28 %; p = 0.011). Factors associated with higher MMT dosages were being married, on antiretroviral therapy, longer incarceration periods, having higher levels of depression, and methadone preference compared to randomization. After controlling for other variables, being prescribed higher methadone dosage (aHR: 2.53, 95 %CI: 1.42-4.49) was the only independent predictor of linkage to methadone after release.

    INTERPRETATION: Higher doses of methadone prescribed before release increased the likelihood of linkage to MMT after release. Methadone dosing should be introduced into international guidelines for treatment of opioid use disorder in prisons and further post-release benefits should be explored.

    FUNDING: National Institute of Drug Abuse (NIDA).

  17. Ahmad A, Nor J, Abdullah AA, Tuan Kamauzaman TH, Yazid MB
    Malays J Med Sci, 2021 Apr;28(2):72-83.
    PMID: 33958962 DOI: 10.21315/mjms2021.28.2.7
    Background: Emergency departments (EDs) are frequently misused for non-emergency cases such as upper respiratory tract infections (URTIs). Flooding of these cases may contribute to inappropriate antibiotic prescribing. The aim of this study was to determine the patient factors associated with inappropriate antibiotic prescribing for URTIs in the EDs.

    Methods: This cross-sectional study involved patients over age 3 years old who presented with URTI to the green zone of the ED of a tertiary hospital on the east coast of Malaysia in 2018-2019. Convenient sampling was done. The patients were categorised into two groups according to their McIsaac scores: positive (≥ 2) or negative (< 2). Antibiotics given to the negative McIsaac group were considered inappropriate.

    Results: A total of 261 cases were included - 127 with positive and 134 with negative McIsaac scores. The most common symptoms were fever and cough. About 29% had inappropriate antibiotic prescribing with a high rate for amoxycillin. Duration of symptoms of one day or less (OR 18.5; 95% CI: 1.65, 207.10; P = 0.018), presence of chills (OR 4.36; 95% CI: 1.13, 16.88; P = 0.033) and diagnosis of acute tonsillitis (OR 5.26; 95% CI: 1.76, 15.72; P = 0.003) were significantly associated with inappropriate antibiotic prescription.

    Conclusion: Factors influencing inappropriate antibiotic prescribing should be pointed out to emergency doctors to reduce its incidence.

  18. Khan MU, Ahmad A, Aqeel T, Akbar N, Salman S, Idress J
    PLoS One, 2015;10(11):e0142485.
    PMID: 26559184 DOI: 10.1371/journal.pone.0142485
    INTRODUCTION: Pakistan accounts for 85.2% of the total polio cases reported worldwide. Healthcare workers (HCWs) are an integral part of immunization campaigns and source of education for the general public. This study aimed to assess the knowledge and attitudes towards polio vaccination among HCWs providing immunisation and education to general public in Quetta and Peshawar divisions of Pakistan.

    METHODS: A cross-sectional survey of 490 HCWs was conducted in two major referral public teaching hospitals of Quetta and Peshawar divisions. During February to April, 2015, a random sample of 490 HCWs was invited to participate in this study. Knowledge and attitudes were assessed by using self-administered, anonymous and pretested questionnaire. Descriptive and logistic regression analyses were used to express the results.

    RESULTS: A total of 468 participants responded to the questionnaire, giving a response rate of 95.5%. Overall, participants demonstrated good knowledge and positive attitudes towards polio vaccination. The mean knowledge score of HCWs about polio was 13.42 ± 2.39 (based on 18 knowledge questions) while the mean attitude score was 28.75 ± 5.5 (based on 9 attitudes statements). Knowledge gaps were identified about the incubation period of poliovirus (19.5%), management issues (31.9%), use of polio vaccine in mild illnesses (34.7%) and the consequences of the polio virus (36.9%). The majority of participants agreed that all children should be vaccinated for polio (95.1%), while reservations were noted about the need of a booster (38.9%), and sterility issues associated with polio vaccines (43.6%). Internet (n = 167, 37%) and Posters (n = 158, 35%) were the main sources used by HCWs to educate themselves about polio.

    CONCLUSION: Participants in this study had good knowledge and positive attitudes towards polio vaccination. Although the data are indicative of gaps in the knowledge of HCWs, the findings may not be generalized to other hospitals in Pakistan.

  19. Chohan IM, Ahmad A, Sallih N, Bheel N, Salilew WM, Almaliki AH
    Sci Rep, 2024 Jul 17;14(1):16543.
    PMID: 39019941 DOI: 10.1038/s41598-024-67463-2
    This research aims to investigate the effects of seawater parameters like salinity, pH, and temperature on the external corrosion behaviour and microhardness of offshore oil and gas carbon steel pipes. The immersion tests were performed for 28 days following ASTM G-1 standards, simulating controlled artificial marine environments with varying pH levels, salinities, and temperatures. Besides, Field emission scanning electron microscopy (FESEM) analysis is performed to study the corrosion morphology. Additionally, a Vickers microhardness tester was used for microhardness analysis. The results revealed that an increase in salinity from 33.18 to 61.10 ppt can reduce the corrosion rate by 28%. In contrast, variations in seawater pH have a significant effect on corrosion rate, with a pH decrease from 8.50 to 7 causing a 42.54% increase in corrosion rate. However, the temperature of seawater was found to be the most prominent parameter, resulting in a 76.13% increase in corrosion rate and a 10.99% reduction in the microhardness of offshore pipelines. Moreover, the response surface methodology (RSM) modelling is used to determine the optimal seawater parameters for carbon steel pipes. Furthermore, the desirability factor for these parameters was 0.999, and the experimental validation displays a good agreement with predicted model values, with around 4.65% error for corrosion rate and 1.36% error for microhardness.
  20. Whba R, Su'ait MS, Whba F, Sahinbay S, Altin S, Ahmad A
    Int J Biol Macromol, 2024 Sep;276(Pt 1):133796.
    PMID: 39004255 DOI: 10.1016/j.ijbiomac.2024.133796
    Natural rubber (NR) and its derivatives play indispensable roles in various industries due to their unique properties and versatile applications. However, the widespread utilization of NR faces intrinsic challenges such as limited mechanical strength, poor resistance to heat and organic solvent, poor electrical conductivity, and low compatibility with other materials, prompting researchers to explore enhancing its performance. Modified NRs (MNRs) like cyclization, deproteinization, chlorination, epoxidation, or grafting NR demonstrated a few enhanced merits compared to NR. However, various strategies, such as blending, vulcanization, crosslinking, grafting, plasticization, reinforcement, and nanostructuring, overcame most drawbacks. This review comprehensively examines these challenges and delves into the modification strategies employed to enhance the properties and expand the applications of NR and its derivatives. Furthermore, the review explores future visions for the NR industry, emphasizing integrating advanced modification techniques, adopting sustainable practices, and promoting circular economy principles. By elucidating the inherent challenges, outlining effective modification strategies, and envisioning future trajectories, this review provides valuable insights for stakeholders seeking to navigate and contribute to the sustainable development of the NR sector.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links