Displaying publications 21 - 40 of 69 in total

Abstract:
Sort:
  1. Fulltext Predation on pupa of Chrysomya rufifacies (Marquart) (Diptera: Calliphoridae) by parasitoid, Exoristobia philippinensis Ashmead (Hymenoptera: Encyrtidae) and Ophyra spinigera larva (Diptera: Muscidae)
    Chin HC, Ahmad NW, Lim LH, Jeffery J, Omar B, Dhang CC, et al.
    Trop Biomed, 2009 Dec;26(3):369-72.
    PMID: 20237454
    A forensic entomological study was conducted using monkey carcasses (Macaca fascicularis Raffles) that were placed in either an outdoor or indoor environment at a coastal area in Tanjung Sepat, Selangor, Malaysia during May until August 2008. We collected pupae of Chrysomya rufifacies (Marquart) from the carcasses and kept them individually. The emergence of 13 parasitic microhymenopteran, from one of the pupae occurring within a week were identified as Exoristobia philippinensis Ashmead (Hymenoptera: Encyrtidae). Another observation was made whereby a pupa of C. rufifacies was predated by a muscid larva, Ophyra spinigera (Stein). The larva squeezed into the pupa and consumed the contents. This paper report C. rufifacies as a new host record for E. philippinensis in Malaysia and highlighted the predatory behavior of O. spinigera larva in natural environment.
    Matched MeSH terms: Life Cycle Stages
  2. Labor markets and economic development in Malaysia
    Smith JP
    Res Popul Econ, 1991;7:131-56.
    PMID: 12317026
    Matched MeSH terms: Life Cycle Stages*
  3. Algae biopolymer towards sustainable circular economy
    Devadas VV, Khoo KS, Chia WY, Chew KW, Munawaroh HSH, Lam MK, et al.
    Bioresour Technol, 2021 Apr;325:124702.
    PMID: 33487515 DOI: 10.1016/j.biortech.2021.124702
    The accumulation of conventional petroleum-based polymers has increased exponentially over the years. Therefore, algae-based biopolymer has gained interest among researchers as one of the alternative approaches in achieving a sustainable circular economy around the world. The benefits of microalgae biopolymer over other feedstock is its autotrophic complex to reduce the greenhouse gases emission, rapid growing ability with flexibility in diverse environments and its ability to compost that gives greenhouse gas credits. In contrast, this review provides a comprehensive understanding of algae-based biopolymer in the evaluation of microalgae strains, bioplastic characterization and bioplastic blending technologies. The future prospects and challenges on the algae circular bioeconomy which includes the challenges faced in circular economy, issues regard to the scale-up and operating cost of microalgae cultivation and the life cycle assessment on algal-based biopolymer were highlighted. The aim of this review is to provide insights of algae-based biopolymer towards a sustainable circular bioeconomy.
    Matched MeSH terms: Life Cycle Stages
  4. Epitokous metamorphosis, reproductive swimming, and early development of the estuarine polychaete, Neanthes glandicincta Southern, 1921 (Annelida, Nereididae) on the east coast of the Malay Peninsula
    Azmi SS, Ibrahim YS, Angsupanich S, Sumpuntarat P, Sato M
    Zookeys, 2021;1011:1-24.
    PMID: 33551646 DOI: 10.3897/zookeys.1011.59780
    The reproductive and developmental characteristics of the nereidid polychaete, Neanthes glandicincta Southern, 1921, commonly recorded in tropical estuaries in the Indo-West Pacific, were examined from Malaysia (the mangrove area of Kuala Ibai, Terengganu) and Thailand (the Lower Songkhla Lagoon) on the east coast of the Malay Peninsula. Epitokous metamorphosis of fully mature males and females and their reproductive swimming behaviour were recorded based on ten Malaysian epitokous specimens, which were collected at night during spring tides in a period of January 2018 to March 2019. Six Thailand epitokes were obtained in February and March 2006 by the laboratory rearing of immature worms. Epitokous metamorphosis is characterised by the enlargement of eyes in both sexes, division of the body into three parts and modification of parapodia with additional lobes in the mid-body of males, and replacement of atokous chaetae in the mid-body by epitokous natatory chaetae, completely in males and incompletely in females. The diameter of coelomic unfertilised eggs in females was 100-140 µm. After fertilisation, each egg formed a jelly layer, inside which embryonic development progressed. Trochophores hatched out of the jelly layer, entering a short free-swimming larval phase followed by demersal life at the early stage of 3-chaetiger nectochaeta one day after fertilisation. Then, the larvae entered benthic life as juveniles, crawling on the bottom, at the late stage of 3-chaetiger nectochaeta two days after fertilisation. The results indicate that N. glandicincta has an annual life cycle, which is usually completed within an estuary with limited larval dispersal ability.
    Matched MeSH terms: Life Cycle Stages
  5. Fulltext Field evaluation of magnetic actuator driven switchgear in Malaysia
    Mohd Dzaki, Mohd Amir, Sanuri, Ishak
    Pertanika Journal of Science & Technology, 2017;25(102):61-68.
    MyJurnal
    Magnetic actuator driven switchgear is a new medium voltage switchgear technology. In this switchgear, the conventional spring mechanism which is used to operate the circuit breaker is replaced with a magnetic actuator mechanism. The suitability of this technology in the Malaysian utility network specifically in highly loaded areas with frequent switching was assessed via a field evaluation. Preliminary results indicated that magnetic actuator driven switchgear perform commendably on the safety aspect, on-site performance monitoring and online diagnostic test results. However, there are several concerns that need to be addressed such as the ease of installation, substation system requirements, high life cycle cost and reliability of components, before this technology can be used widely.
    Matched MeSH terms: Life Cycle Stages
  6. Review of Synthesiomyia nudiseta (Diptera: Muscidae) as a useful tool in forensic entomology
    Ivorra T, Martínez-Sánchez A, Rojo S
    Int J Legal Med, 2021 Sep;135(5):2003-2015.
    PMID: 33738569 DOI: 10.1007/s00414-021-02543-w
    Synthesiomyia nudiseta (van der Wulp, 1883) is a synanthropic muscid found in tropical and subtropical zones around the world. The larvae of this species are a secondary agent of myiasis with necrophagous habits and play an important role in forensic entomology, as they are used as an indicator of post-mortem interval. Adults can be considered vectors of etiological agents such as Escherichia coli and Shigella dysenteriae. Due to its ability to adapt to different environmental conditions, its high dispersal capacity (shown by its introduction to Europe), its predatory habits in the last larval stage and the difficulty of identifying it, a very important goal is to update our knowledge about this species. Therefore, the main objective of this paper is to review the identification, geographical distribution and biology of this species in order to provide better support to investigations involving this fly.
    Matched MeSH terms: Life Cycle Stages
  7. Fulltext Sexual reproduction and genetic polymorphism within the cosmopolitan marine diatom Pseudo-nitzschia pungens
    Kim JH, Ajani P, Murray SA, Kim JH, Lim HC, Teng ST, et al.
    Sci Rep, 2020 06 30;10(1):10653.
    PMID: 32606343 DOI: 10.1038/s41598-020-67547-9
    Different clades belonging to the cosmopolitan marine diatom Pseudo-nitzschia pungens appear to be present in different oceanic environments, however, a 'hybrid zone', where populations of different clades interbreed, has also been reported. Many studies have investigated the sexual reproduction of P. pungens, focused on morphology and life cycle, rather than the role of sexual reproduction in mixing the genomes of their parents. We carried out crossing experiments to determine the sexual compatibility/incompatibility between different clades of P. pungens, and examined the genetic polymorphism in the ITS2 region. Sexual reproduction did not occur only between clades II and III under any of experimental temperature conditions. Four offspring strains were established between clade I and III successfully. Strains established from offspring were found interbreed with other offspring strains as well as viable with their parental strains. We confirmed the hybrid sequence patterns between clades I and III and found novel sequence types including polymorphic single nucleotide polymorphisms (SNPs) in the offspring strains. Our results implicate that gene exchange and mixing between different clades are still possible, and that sexual reproduction is a significant ecological strategy to maintain the genetic diversity within this diatom species.
    Matched MeSH terms: Life Cycle Stages/genetics
  8. Life cycle assessment of environmental impacts associated with oxidative desulfurization of diesel fuels catalyzed by metal-free reduced graphene oxide
    Lin S, Ng SF, Ong WJ
    Environ Pollut, 2021 Nov 01;288:117677.
    PMID: 34273765 DOI: 10.1016/j.envpol.2021.117677
    This study aimed to analyze the environmental impacts of the oxidative desulfurization (ODS) process catalyzed by metal-free reduced graphene oxide (rGO) through life cycle assessment (LCA). The environmental impacts study containing the rGO production process, the ODS process, the comparison of different oxidants and solvents was developed. This study was performed by using ReCiPe 2016 V1.03 Hierarchist midpoint as well as endpoint approach and SimaPro software. For the production of 1 kg rGO, the results showed that hydrochloric acid (washing), sulfuric acid (mixing), hydrazine (reduction) and electricity were four main contributors in this process, and this process showed a significant impact on human health 14.21 Pt followed by ecosystem 0.845 Pt and resources 0.164 Pt. For the production of 1 kg desulfurized oil (400 ppm), main environmental impacts were terrestrial ecotoxicity (43.256 kg 1,4-DCB), global warming (41.058 kg CO2), human non-carcinogenic toxicity (19.570 kg 1,4-DCB) and fossil resource scarcity (13.178 kg oil), and the main contributors were electricity, diesel oil and acetonitrile. The whole ODS process also showed a greatest effect on human health. For two common oxidants hydrogen peroxide and oxygen used in ODS, hydrogen peroxide showed a greater impact than oxygen. On the other hand, for three common solvents employed in ODS, N-methyl-2-pyrrolidone had a more serious impact on human health followed by acetonitrile and N,N-dimethylformamide. As such, LCA results demonstrated the detailed environmental impacts originated from the catalytic ODS, hence elucidating systematic guidance for its future development toward practicality.
    Matched MeSH terms: Life Cycle Stages
  9. Perspectives on cultivation and harvesting technologies of microalgae, towards environmental sustainability and life cycle analysis
    Soudagar MEM, Kiong TS, Jathar L, Nik Ghazali NN, Ramesh S, Awasarmol U, et al.
    Chemosphere, 2024 Apr;353:141540.
    PMID: 38423144 DOI: 10.1016/j.chemosphere.2024.141540
    The development of algae is seen as a potential and ecologically sound approach to address the increasing demands in multiple sectors. However, successful implementation of processes is highly dependent on effective growing and harvesting methods. The present study provides a complete examination of contemporary techniques employed in the production and harvesting of algae, with a particular emphasis on their sustainability. The review begins by examining several culture strategies, encompassing open ponds, closed photobioreactors, and raceway ponds. The analysis of each method is conducted in a systematic manner, with a particular focus on highlighting their advantages, limitations, and potential for expansion. This approach ensures that the conversation is in line with the objectives of sustainability. Moreover, this study explores essential elements of algae harvesting, including the processes of cell separation, dewatering, and biomass extraction. Traditional methods such as centrifugation, filtration, and sedimentation are examined in conjunction with novel, environmentally concerned strategies including flocculation, electro-coagulation, and membrane filtration. It evaluates the impacts on the environment that are caused by the cultivation process, including the usage of water and land, the use of energy, the production of carbon dioxide, and the runoff of nutrients. Furthermore, this study presents a thorough examination of the current body of research pertaining to Life Cycle Analysis (LCA) studies, presenting a perspective that emphasizes sustainability in the context of algae harvesting systems. In conclusion, the analysis ends up with an examination ahead at potential areas for future study in the cultivation and harvesting of algae. This review is an essential guide for scientists, policymakers, and industry experts associated with the advancement and implementation of algae-based technologies.
    Matched MeSH terms: Life Cycle Stages
  10. Fulltext Morphological descriptions on the larvae of Hypopygiopsis fumipennis (Walker, 1856) (Diptera: Calliphoridae)
    Heo CC, Latif B, Silahuddin SA, Nazni WA, Omar B
    Trop Biomed, 2015 Mar;32(1):151-9.
    PMID: 25801265
    The study on biodiversity of forensically important Diptera in the tropical rain forest in Malaysia is scarce. Thus, a preliminary survey was conducted at a jungle fringe near Kampung Bahagia Bukit Lagong, Sungai Buloh, Selangor. A rat carcass was offered to attract carrion flies and we collected an adult female calliphorid, Hypopygiopsis fumipennis (Walker, 1856) during the fresh stage of carcass decomposition. The female fly was allowed to oviposit on chicken liver in a container and the resulting larvae were reared to the adult stage. Along the developmental process, several individuals from each instar were collected and preserved in 70% ethanol and then processed on the slides. We recorded the duration of development for each instar and described its larval features for the first time. The third instar larvae of H. fumipennis showed accessory oral sclerite present, anterior spiracle with 13-15 papillae, intersegmental spines mostly unicuspid with pointed end, and posterior spiracles heavily sclerotized with inter-slit projections. Some larval differences between H. fumipennis and Hypopygiopsis violacea were noted.
    Matched MeSH terms: Life Cycle Stages
  11. Fulltext Microstructural behavior of magnetorheological elastomer undergoing durability evaluation by stress relaxation
    Johari MAF, Mazlan SA, Nasef MM, Ubaidillah U, Nordin NA, Aziz SAA, et al.
    Sci Rep, 2021 May 25;11(1):10936.
    PMID: 34035434 DOI: 10.1038/s41598-021-90484-0
    The widespread use of magnetorheological elastomer (MRE) materials in various applications has yet to be limited due to the fact that there are substantial deficiencies in current experimental and theoretical research on its microstructural durability behavior. In this study, MRE composed of silicon rubber (SR) and 70 wt% of micron-sized carbonyl iron particles (CIP) was prepared and subjected to stress relaxation evaluation by torsional shear load. The microstructure and particle distribution of the obtained MRE was evaluated by a field emission scanning electron microscopy (FESEM). The influence of constant low strain at 0.01% is the continuing concern within the linear viscoelastic (LVE) region of MRE. Stress relaxation plays a significant role in the life cycle of MRE and revealed that storage modulus was reduced by 8.7%, normal force has weakened by 27%, and stress performance was reduced by 6.88% along approximately 84,000 s test duration time. This time scale was the longest ever reported being undertaken in the MRE stress relaxation study. Novel micro-mechanisms that responsible for the depleted performance of MRE was obtained by microstructurally observation using FESEM and in-phase mode of atomic force microscope (AFM). Attempts have been made to correlate strain localization produced by stress relaxation, with molecular deformation in MRE amorphous matrix. Exceptional attention was focused on the development of molecular slippage, disentanglement, microplasticity, microphase separation, and shear bands. The relation between these microstructural phenomena and the viscoelastic properties of MRE was diffusely defined and discussed. The presented MRE is homogeneous with uniform distribution of CIP. The most significant recent developments of systematic correlation between the effects of microstructural deformation and durability performance of MRE under stress relaxation has been observed and evaluated.
    Matched MeSH terms: Life Cycle Stages
  12. P-TEFb goes viral
    Zaborowska J, Isa NF, Murphy S
    Inside Cell, 2016 04;1(2):106-116.
    PMID: 27398404
    Positive transcription elongation factor b (P-TEFb), which comprises cyclin-dependent kinase 9 (CDK9) kinase and cyclin T subunits, is an essential kinase complex in human cells. Phosphorylation of the negative elongation factors by P-TEFb is required for productive elongation of transcription of protein-coding genes by RNA polymerase II (pol II). In addition, P-TEFb-mediated phosphorylation of the carboxyl-terminal domain (CTD) of the largest subunit of pol II mediates the recruitment of transcription and RNA processing factors during the transcription cycle. CDK9 also phosphorylates p53, a tumor suppressor that plays a central role in cellular responses to a range of stress factors. Many viral factors affect transcription by recruiting or modulating the activity of CDK9. In this review, we will focus on how the function of CDK9 is regulated by viral gene products. The central role of CDK9 in viral life cycles suggests that drugs targeting the interaction between viral products and P-TEFb could be effective anti-viral agents.
    Matched MeSH terms: Life Cycle Stages
  13. Fulltext Preliminary study on metallic coating of steel substrates through hot dip aluminizing by using energy dispersive X-ray spectroscopy (EDX) technique
    Hishamuddin Husain, Anasyida Abu Seman, Abdul Razak Daud, Muhamad Daud
    Journal of Nuclear and Related Technologies, 2009;2009(2):63-69.
    MyJurnal
    Even though a lot of new advanced materials have been developed nowadays, steel remains a major material in construction, automobiles, appliances, industrial machinery as well as in the nuclear industry. Due to steel easily corroded, a proper surface protection is required to avoid any failures and extended the life cycle of the components. Surface coating is an efficient and economical method to obtain desirable material surfaces properties. Hot dip aluminizing technique was utilized in this study. Experiments have been conducted on the mild steel substrates with 12mm diameter. Prior to hot dipping process, observation on grain growth at three different temperatures had also been conducted to understand the behaviour of steel under application of heat. The substrates were heated at 700ºC, 800ºC and 900ºC for 1 hour and the microstructure was analyzed. The temperature of 800C was chosen for hot dipping. The substrates were dipped into the molten aluminum maintained at temperature 800ºC for 2,4,6,8,10,15 and 20 minutes. Optical microscopy and energy dispersive X-ray spectroscopy were used in this investigation. From the microstructure observation, it showed the appearance of intermetallic layer covered by the top layer of Al on the mild steel substrate increased with the increase in dipping time ranging from 36 to 282μm. The result of EDX analysis revealed the existence of Fe and Al in form of Fe2Al5 phase for all the dipping time.
    Matched MeSH terms: Life Cycle Stages
  14. Fulltext Host specificity of Hepatocystis infection in short-nosed fruit bats (Cynopterus brachyotis) in Singapore
    Low DHW, Hitch AT, Skiles MM, Borthwick SA, Neves ES, Lim ZX, et al.
    Int J Parasitol Parasites Wildl, 2021 Aug;15:35-42.
    PMID: 33948432 DOI: 10.1016/j.ijppaw.2021.04.001
    Haemosporidians infect a wide diversity of bat genera and species, yet little is known about their transmission cycles or epidemiology. Though several recent studies have focused on the genus Hepatocystis, an Old World parasite primarily infecting bats, monkeys, and squirrels, this group is still understudied with little known about its transmission and molecular ecology. These parasites lack an asexual erythrocytic stage, making them unique from the Plasmodium vertebrate life cycle. In this study, we detected a prevalence of 31% of Hepatocystis in short-nosed fruit bats (Cynopterus brachyotis) in Singapore. Phylogenetic reconstruction with a partial cytochrome b sequence revealed a monophyletic group of Hepatocystis from C. brachyotis in Malaysia, Singapore, and Thailand. There was no relationship with infection and bat age, sex, location, body condition or monsoon season. The absence of this parasite in the five other bat species sampled in Singapore indicates this Hepatocystis species may be host restricted.
    Matched MeSH terms: Life Cycle Stages
  15. Fulltext A clinical tool to predict Plasmodium vivax recurrence in Malaysia
    Mat Ariffin N, Islahudin F, Kumolosasi E, Makmor-Bakry M
    BMC Infect Dis, 2017 12 08;17(1):759.
    PMID: 29216842 DOI: 10.1186/s12879-017-2868-9
    BACKGROUND: Recurrence rates of Plasmodium vivax infections differ across various geographic regions. Interestingly, South-East Asia and the Asia-Pacific region are documented to exhibit the most frequent recurrence incidences. Identifying patients at a higher risk for recurrences gives valuable information in strengthening the efforts to control P. vivax infections. The aim of the study was to develop a tool to identify P. vivax- infected patients that are at a higher risk of recurrence in Malaysia.

    METHODS: Patient data was obtained retrospectively through the Ministry of Health, Malaysia, from 2011 to 2016. Patients with incomplete data were excluded. A total of 2044 clinical P. vivax malaria cases treated with primaquine were included. Data collected were patient, disease, and treatment characteristics. Two-thirds of the cases (n = 1362) were used to develop a clinical risk score, while the remaining third (n = 682) was used for validation.

    RESULTS: Using multivariate analysis, age (p = 0.03), gametocyte sexual count (p = 0.04), indigenous transmission (p = 0.04), type of treatment (p = 0.12), and incomplete primaquine treatment (p = 0.14) were found to be predictors of recurrence after controlling for other confounding factors; these predictors were then used in developing the final model. The beta-coefficient values were used to develop a clinical scoring tool to predict possible recurrence. The total scores ranged between 0 and 8. A higher score indicated a higher risk for recurrence (odds ratio [OR]: 1.971; 95% confidence interval [CI]: 1.562-2.487; p ≤ 0.001). The area under the receiver operating characteristic (ROC) curve of the developed (n = 1362) and validated model (n = 682) was of good accuracy (ROC: 0.728, 95% CI: 0.670-0.785, p value 

    Matched MeSH terms: Life Cycle Stages
  16. Morphological characteristics of developmental stages of Acanthamoeba and Naegleria species before and after staining by various techniques
    Ithoi I, Ahmad AF, Mak JW, Nissapatorn V, Lau YL, Mahmud R
    Southeast Asian J. Trop. Med. Public Health, 2011 Nov;42(6):1327-38.
    PMID: 22299400
    Seven stains were studied to determine the best color and contrast for staining the developmental stages of free living pathogenic Acanthamoeba and Naegleria species. The acid-fast bacilli stain (AFB) produced a blue color without contrast; trichrome-eosin and modified Field's showed various color contrasts; Giemsa, iron-hematoxylin, modified AFB and Gram produced only one color which distinguished the nucleus, nucleolus, cytoplasm, food- and water-vacuoles. The motile organs (acanthopodia, pseudopodia, lobopodia and flagella) were also clearly differentiated but produced a similar color as the cytoplasm. These motile organelles were first induced by incubating at 37 degrees C for at least 15 minutes and then fixing with methanol in order to preserve the protruding morphology prior to staining. The trichrome-eosin and iron-hematoxylin stains showed good color contrast for detecting all three stages, the trophozoite, cyst and flagellate; Giemsa and Gram stained the trophozoite and flagellate stages; the modified Field's and modified AFB stains stained only the trophozoite stage. Depending on the purpose, all these stains (except the AFB stain) can be used to identify the developmental stages of Acanthamoeba and Naegleria for clinical, epidemiological or public health use.
    Matched MeSH terms: Life Cycle Stages
  17. A replenishment inventory model for items under time-varying demand rates considering trade credit period and cash discount for a finite time horizon
    MOHD OMAR
    Sains Malaysiana, 2012;41:493-497.
    Many researchers have developed various economic ordering quantity models by assuming an infinite time horizon and constant demand rate. However due to rapid technological advancement, shorter product life cycle and severe competition, those assumptions are no longer realistic. In this paper, we complement that shortcoming by considering an inventory model that satisfies a continuous time-varying demand rate for a finite time horizon when trade credit period and unit cash discount are allowed. The time horizon consists of n different cycles with equal or different cycles length. The trade credit period was assumed to be proportional to the cycle length. We developed mathematical models and presented a numerical example to support the effectiveness of these models.
    Matched MeSH terms: Life Cycle Stages
  18. Comparison of life cycle toxicity assessment methods for municipal wastewater treatment with the inclusion of direct emissions of metals, PPCPs and EDCs
    Rashid SS, Liu YQ
    Sci Total Environ, 2021 Feb 20;756:143849.
    PMID: 33248794 DOI: 10.1016/j.scitotenv.2020.143849
    The occurrence of various micropollutants such as pharmaceuticals personal care products, endocrine disrupting chemicals (PPCPs/EDCs) and metals in municipal wastewater, and their poor removal efficiencies can lead to toxicity impact on humans, and freshwater and terrestrial ecosystems. Life cycle assessment is an efficient and effective tool to evaluate the environmental impact of wastewater treatment plants, but guidelines for toxicity assessment are lacking due to the complexity. This study aims to evaluate both life cycle inventory by including metals and PEC, and life cycle toxicity assessment (LCIA) methods namely CML-IA, Recipe, USEtox, EDIP 2003 and IMPACT 2002+ in midpoint category with a large centralised wastewater treatment plant in Malaysia as a case study. The removal efficiencies of metals and PPCPs/EDCs in the wastewater ranged from 9% to 99% and no clear patterns were found about occurrence and removal efficiencies of metals and PPCPs/EDCs in developing and developed countries. The inclusion of metals and PPCPs/EDCs in effluent resulted in 76% increase in freshwater ecotoxicity potential (FEP) and 88% increase in terrestrial ecotoxicity potential (TEP) while only 4% increase in human toxicity potential (HTP). The results indicate the importance of including direct emissions such as metals and PPCPs/EDCs even in low-strength municipal wastewater for environmental toxicity assessment. The comparison of five LCIA methods suggests that HTP assessment is more challenging due to inconsistency between five LCIA methods while CML-IA, Recipe, and IMPACT 2002+ achieved consistent human toxicity and ecotoxicity assessment results in the WWTP. The results highlight the importance of sampling and inclusion of metals and PPCPs/EDCs data especially prioritised micropollutants for life cycle toxicity assessment and recommends LCIA methods for ecotoxicity assessment of WWTPs in the current scientific development situation on toxicity studies, which can provide guidance to researchers for life cycle toxicity assessment of wastewater treatment.
    Matched MeSH terms: Life Cycle Stages
  19. The prevalence and intensity of Amblyomma javanense infestation on Malayan pangolins (Manis javanica Desmarest) from Peninsular Malaysia
    Hassan M, Sulaiman MH, Lian CJ
    Acta Trop, 2013 May;126(2):142-5.
    PMID: 23416121 DOI: 10.1016/j.actatropica.2013.02.001
    A parasitological survey of 16 pangolins, confiscated from the Department of Wildlife and Nature Park Peninsular Malaysia (DWNP) at Kelantan and Pulau Pinang, Malaysia was conducted in 2011. Amblyomma javanense (family: Ixodidae) was the only ectoparasite found on the pangolins. The prevalence, intensity and life cycle of A. javanense were observed together with the respective pangolins' age and sex. It was found that 68.8% of the pangolins were infected, and significant difference, χ(2)(1, N=16)=4.02, p=0.05 were observed with males higher in infestation (88.9%) as compared to the females (42.9%). However, the mean intensity was higher on females (72) as compared to males (31.6). In addition, significant difference, χ(2) (2, N=16)=6.73, p=0.05 was recorded between adults and juveniles with juveniles found to be 100% infected as compared to adult (63.6%). Nevertheless, the mean intensity was slightly higher on adults (47) than juveniles (35). Adult ticks were found in higher numbers as compared to the nymph and larvae with number of male ticks higher (236) as compared to the females (53). Similarly, a high significant difference χ(2)(2, N=469)=203.47, p=0.05 was recorded in the composition of the tick's life stages with a higher number of adult ticks (61.6%) followed by nymph (30.3%) and larvae (8.1%). As such, the results of this study revealed a picture of the A. javanense life cycle which is related to the age and gender of the Malayan Pangolin.
    Matched MeSH terms: Life Cycle Stages
  20. Life table of Paederus fuscipes (Coleoptera: Staphylinidae)
    Bong LJ, Neoh KB, Jaal Z, Lee CY
    J Med Entomol, 2012 May;49(3):451-60.
    PMID: 22679850
    The life history characteristics of the rove beetle Paederus fuscipes Curtis were studied under laboratory conditions using three field strains from Malaysia: Desa Wawasan (DW), Sri Pinang (SP), and Ampang Jajar (AJ). The total development time of immature stages differed significantly among the three strains, especially between DW (17.43 +/- 0.16 d), SP (18.60 +/- 0.19 d), and AJ (18.68 +/- 0.22 d). Adult females and males from DW also exhibited a shorter life span, although the difference among strains was not significant. In terms of fecundity, the numbers of eggs laid per female for DW, SP, and AJ were 121.28 +/- 15.98, 127.30 +/- 18.01, and 147.45 +/- 17.12, respectively. Additionally, because of the shorter life span in DW strain, two apparent peaks in age-stage specific fecundity were detected. The beetles compensated for their shorter life span by increasing their reproductive activity to sustain the progeny in the population. The intrinsic rates of increase (r) of P. fuscipes from DW, SP, and AJ were 0.0773 +/- 0.0046 d(-1), 0.0788 +/- 0.0051 d(-1), and 0.0873 +/- 0.0054 d(-1), respectively; and the net reproduction rates (R0) were 40.09 +/- 7.39 offspring, 45.29 +/- 8.74 offspring, and 42.34 +/- 8.25 offspring, respectively. The mean generation time of P. fuscipes from AJ was 43.08 +/- 1.07 d, which was significantly higher than that from DW (47.95 +/- 1.36 d) and SP (48.57 +/- 1.43 d). The total immature development time of P. fuscipes in this study was shorter than values reported in previous studies.
    Matched MeSH terms: Life Cycle Stages*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links