This paper presents the solution to a calculation of the pH of a very dilute solution of a weak acid, taking into account the effect of the hydroxonium ions generated from the ionization of the acid on the ionization of water, also a very weak acid. To be solved successfully, this calculation involves the concepts of conservation of charge, pH, equilibria and the application of the general solution to a cubic equation. Such an exercise requires the application of skills in algebra, and can provide a core of understanding that can prepare advanced students for many different sorts of calculations that represent real-life problems in the chemical sciences. A programme is presented in C++ which enables the work of students to be individualized so that each student in a class can work through a slightly different pH calculation, in such a way that a class supervisor can quickly check each student’s result for accuracy.This exercise is presented as a potential means of enabling students to undertake and master similar types of calculations involving the application of complex algebra to problems related to equilibria and solution dynamics.
In this study polymer electrolytes composed of poly(methyl methacrylate) (PMMA) as a host polymer and ethylene carbonate (EC) as a plasticizer complexed with different lithium salts, i.e. lithium tetrafluoroborate (LiBF4) and lithium triflate (LiCF3SO3) were prepared by the solution casting technique. The conductivities of the films were characterized by impedance spectroscopy. At room temperature, the highest conductivities were 4.07 × 10–7S cm–1 and 3.40 × 10–5 S cm–1 achieved, respectively from the films containing 30 wt% LiBF4 in the PMMA-EC-LiBF4 system and 35 wt% LiCF3SO3 in the PMMA-EC-LiCF3SO3 system. The conductivity-temperature dependence of the films seemed to obey the Arrhenius equation in which the ion transport in these materials was thermally assisted. Scanning electron microscopy analysis showed that the surface of PMMA-EC-LiCF3SO3 film was smooth and homogeneous, hence lithium ions could traverse through the PMMA-EC-LiCF3SO3 film more easily compared to the PMMA-EC-LiBF4 film. X-Ray diffraction studies revealed that complexation had occurred and the complexes formed were amorphous.
Silver catfish (Pangasius sutchi) skin gelatin was extracted to determine the effects of extraction time on the functional properties of the gelatin in terms of solubility, protein solubility as a function of pH and sodium chloride concentration, emulsifying capacity and stability, water holding capacity, fat binding capacities and foaming properties. Silver catfish skins were washed in sodium chloride (NaCl) solution prior to pre-treatment in sodium hydroxide (NaOH) and acetic acid solution. Gelatin was extracted at 50ºC for 6, 8, 10 and 12 hours extraction time followed by freeze drying. The extraction of silver catfish skin gelatin at 50 ºC for 12 hours was more effective than extraction at 6, 8 and 10 hours where the gelatin was characterized by higher emulsifying capacity (52.63%), emulsifying stability (47.83%), water holding capacity (31.78 mL/g), fat binding capacities (54.76%), foaming capacity (41.47 mL) and foaming stability (56.42%) than gelatins extracted at other extraction time. The longer the extraction time, the better the functional properties of the gelatin. Based on its good functional properties, silver catfish skin gelatin may be useful in various food applications such as soups, sauces and gravies.
The Short Form Health Survey SF-36 is a well-known generic health-related quality of life measure that has widely been used worldwide. However, given the cultural, social and ethnic differences in some countries, it might not follow the intended structure of the instrument. Hence, this study aims to determine the psychometric properties of the Malay version of Short Form Health Survey (SF-12) among postpartum mothers. A cross-sectional study was conducted among 1-month postpartum mothers attending Obstetric and Gynecology clinic, Universiti Sains Malaysia Hospital, Kelantan, Malaysia. Reliability was estimated using internal consistency and the factor structure was extracted by performing confirmatory factor analysis using SPSS v. 20 and AMOS v. 20. A total of 108 women responded. The mean (SD) score for the Physical Component Summary (PCS) score and Mental Component Summary (MCS) score were 43.3 (7.08) and 42.4 (6.87) respectively. The Cronbach alpha for PCS-12 was 0.749 and MCS-12 was 0.701. Spearman correlations of individual items and the SF-12 component summary scores showed PF, RP, BP and GH items correlated higher with the PCS score, whereas the VT, SF, RE, and MH items correlated higher with the MCS score lending support to its good convergent validity. The confirmatory factor solution showed final model with two factors structure and six items each with acceptable factor loadings, satisfactory absolute and parsimonious fitness (RMSEA=0.1, x2/df=2.4). The psychometric tests of the Malay version of SF-12 generally showed acceptable validity and reliability among postpartum women.
Study site: Obstretic and gynecology Hospital Universiti Sains Malaysia (HUSM)
The takraw ball is a very unique interwoven ball used in the action game of sepak takraw. The traditional takraw ball is manufactured by conventionally weaving split rattan strips into a spherical basket. Modern takraw balls are manufactured by forming strips of plastics materials into interwoven hoop. These interwoven hoops form 12 pentagon holes and 30 intersections. The purpose of this study is to construct a finite-element (FE) model of a takraw ball in particular for normal impact simulation on flat surfaces under low speed conditions. Two FE models were developed to observe the dynamic behavior including impact forces, contact time, coefficient of restitution and deformation of the ball. The first model consists of a single solid hollow ball with 12 pentagon holes and the second model consists of six center strips and 12 side edge strips of
extrusion hoops to form 12 pentagon holes and 270 cross-sections. The models were also compared with results of experimental impact tests whereby the ball was impacted normal to a rigid plate at three different heights. The ball is described in the FE model as a linear elastic material.
It was found that the FE analysis solution of the ball model was found to be reasonably close with the experimental results. However further improvement need to be done by taking into consideration the nonlinearity of the takraw ball under large deformation as well as at high impact velocity.
A technique to isolate DNA from ghee was developed for the authentication of beef fat product. The method was based on pre-mixed ghee with phosphate buffer solution (PBS) prior to DNA extraction using Epicentre extraction method. The recovery of beef DNA was then analysed by polymerase chain reaction (PCR) using beef species-specific oligonucleotide primers which targeted the mitochondria DNA (mtDNA) of cytochrome b (cyt b) gene. The amplicon was 274 bp in size. The developed ghee extraction method offers a high yield of DNA providing 100 ng per μl and useful for validating beef fat product.
Carbon-11 labeled radiotracers, such as 11C-acetate and
11C-palmitate are widely used in positron
emission tomography (PET) for noninvasive evaluation of myocardial metabolism under varied
physiological conditions.These tracers are attractive probes of tissue physiology, because they are
simply radiolabled versions of the native biochemical substrates. One of the major metabolites
generated by these tracers upon the administration is 11CO2 produced via the citric acid cycle. In
quantitative modeling of
11C-acetate and
11C-palmitate PET data, the fraction of blood
11C
radioactivity present as
11CO2 needs to be measured to obtain a correct radiotracer arterial
input function. Accordingly, the literature describes a method whereby the total blood
11C-activity
is counted in blood samples treated with base solution, while the fraction of
1 1CO2 is measured
after the blood is treated with acid followed by a 10 minutes gas-purge. However, a detailed
description of the experimental validation of this method was not provided. The goal of this study
was to test the reliability of a 10 minute gas purging method used to assay
11CO2 radioactivity in
blood
Utilization of palm kernel expeller (PKE), a palm oil milling by-product, may be diversified through the exploitation of its protein component. The PKE protein could be effectively extracted using an alkaline
solution and followed by enzymatic hydrolysis to produce PKE protein hydrolysates or crude PKE peptide. The extraction of PKE protein was successfully carried out using an alkaline solution at pH11, at ratio of 1:10 (g/ml), PKE powder to alkaline solution with continuous shaking, 150 rpm, in a water bath operating at 50°C for 30 min. The extracted protein powder (PKEP) had 68.50±3.08% crude protein, 0.54±0.03% fat and 0.73±0.02% ash. The freeze-dried PKEP was re-suspend in particular buffer and hydrolyzed with proteolytic enzymes (Alcalase® 2.4L, Flavourzyme® 500MG, pepsin or trypsin) to obtain PKEP hydrolysate (PKEPH). The effect of enzyme concentration (0, 2, 4, 6, 8 & 10%) and time of hydrolysis (0, 6, 12, 24, 48 h) was studied to determine the most efficient hydrolytic conditions. Results showed that all enzymes tested were capable of hydrolyzing the PKEP and producing hydrolysates with different degree of hydrolysis (DH%). At 8.0% concentration, Alcalase®2.4L hydrolyzed PKEP into the highest DH (75.96%) hydrolysate (PKEPH) after 1h hydrolysis. Although only with 2.0% Alcalase 2.4 L concentration, it was sufficient to produce PKEP hydrolysate of 81.35% DH %, but it required 12 h to hydrolyze the protein. Pepsin was relatively the least efficient protease to hydrolyze the PKEP.
Texture evolution of NiO formed during oxidation of polycrystalline single oriented (100) Ni-Cr was investigated. This foil was also termed rolling assisted biaxially textured substrate (RABiTS). X-ray diffractograms of oxidized Ni-Cr RABiTS foil showed the existence of mostly (200) NiO indicating (100)-type NiO formed exclusively on (100) singly oriented Ni-Cr grains. Epitaxial relationship between the two layers is observed. However the dual-in-plane texture was recorded.
The in-plane texture was assessed by conducting phi scan and plotting series of pole figures measured at (111) NiO peak. The mechanism of the oxides formation was proposed to take into account the formation of (100)-type NiO. Cross section morphology of the oxidised foils reveals two oxidation layers; fast growing external layer consisting of the (100)-type NiO and an internal layer consisted of mostly Cr2O3 and maybe NiCr2O4. The thickness of NiO was ~ 10Pm. Cr2O3 formed as needle-like oxides embedded in a matrix of Ni foil. Inward diffusion of oxygen is believed to have caused this to happen. The external NiO layer was consisted of duplex microstructure characterised by columnar layer growing vertical on the surface of the metal and a few micron thick of equiaxed NiO. Delamination of the outer NiO layer often occurred at the columnarequiaxed interface which could be cured by CeO2 deposition on the foil prior to the oxidation process. CeO2 was deposited by conversion immersion using Ce(NO3)3.6H2O solution. (200) NiO formed on this coated sample as well.
Nuclear grade (high-purity) graphite for fuel element and moderator material in Advanced Gas
Cooling Reactors (AGR) displays large scatter in strength and a non-linear stress-strain response from the damage accumulation. These responses can be characterized as quasi-brittle behaviour. Current assessments of fracture in core graphite components are based on the linear elastic approximation and thus represent a major assumption. The quasi-brittle behaviour gives challenge to assess the real nuclear graphite component. The selected test method would help to bridge the gap between microscale to macro-scale in real reactor component. The small scale tests presented here can contribute some statistical data to manifests the failure in real component. The evaluation and choice of different solution design of biaxial test will be discussed in this paper. The ball on-three ball test method was used for assessment test follows by numerous of analytical method. The results shown that biaxial strength of the EY9 grade graphite depends on the method used for evaluation. Some of the analytical methods use to calculate biaxial strength were found not to be valid and therefore should not be used to assess the mechanical properties of nuclear graphite.
This paper presents the use of factorial experiments and response surface methodology to determine the best workstation design configuration of an existing electronic industry. The aim is to find the value of physical dimensions that gives the best performance for the workstation. Four performance measures are selected; the cycle time, the metabolic energy expenditure, worker’s posture during the task and lifting limitations. The methodology used in this study consists of two parts. The first part is based on factorial experiments and handles discrete search over combinations of factor-levels for improving the initial solution. In the second part, the solution that was obtained earlier is further refined by changing the continuous factors by using response surface methodology. The result of this optimization study shows that the optimum value of physical dimensions gives a significant improvement for the performance measures of the workstation.
Composite resins Amaris is claimed to have hydrophobic effect which minimizes the staining intake. This study is to investigate the colour stability of Amaris compared to Filtek Z250 in coffee solution. Sixty discs of composite resins Filtek Z250 (3M ESPE) and Amaris (Voco) with diameter of 5mm and depth of 2mm were fabricated by packing in a drinking straw and sectioned with hard tissue cutter (Exakt, Japan). The surfaces of the specimens were polished with Sof-Lex disc before each group of the samples is immersed in coffee solution. They were kept in the solution for 4 days at 370C and assessed at the period of 2 hours, 1 day, 2 days, 3 days, and 4 days. The staining was assessed visually and recorded using Lobene (1968) Stain Index and score was given accordingly. The colour changes of both groups were not statistically significant (p
The removal of heavy metals like lead, copper and cadmium from wastewater streams is an important environmental issue. The capability of immobilized Pycnoporus sanguineus (P. sanguineus), a white-rot macrofungi to remove heavy metals from aqueous solution in a packed bed column was investigated. Lead (Pb (II)) biosorption by immobilized cells of P. sanguineus was investigated in a packed bed column. The experiments were carried out by considering the effect of bed height (5-13 cm), flow rate (4-12 ml min-1) and initial lead (II) concentration (50-300 mg L-1). The breakthrough profiles showed that the saturation of metal ions was achieved faster for 5 cm bed height and 12 ml min-1 influent flow rate. However, the breakthrough time decreased as the initial metal concentration increased from 50 to 300 mg L-1. The column was regenerated using 0.1M HCl solution and biosorptiondesorption studies were carried out for 2 cycles. The results showed that the breakthrough time decreased as the number of cycle was proceeded.
Patient safety is a serious global healthcare issue. Harm can be caused by a range of errors or adverse events. Therefore, it is vital that the commissioning of a new operating theatre should comply to the highest standard before it is allowed to function. This paper accounts our experience in the commissioning of the University Malaya Medical Centre (UMMC) trauma centre operating theatre(OT) complex in July 2008. We highlighted the problems we faced in adhering to the international standard guidelines. Unanticipated events were handled professionally and solved. With this experience, we hope that the identified problems would provide suggestions for commissioning an operating theatre in the local setting in the future.
A biodegradable composite (PLA/KBF blends) was prepared using melt blending technique in a brabender mixer and characterized with FTIR and TGA analyzer. Five percent of triacetin and glycerol contents were used as plasticizers to plasticise PLA matrix. KBF was treated with 4% NaOH solution, while 30 wt% of fibre loading was used constantly for all the composite samples. From the FTIR analysis, the additions of triacetin and glycerol to PLA composites did not produce any significant difference, and there were no chemical changes in both the plasticized PLA with the treated and untreated KBF, respectively. Observation done on the TGA analysis revealed that both plasticizers did improve the thermal stability of the composites, and this might be due to the modification on the fibre surfaces, which further led to the delay in the degradation of the PLA matrix and to significant stabilization effect.
α-Mangostin was extracted from the pericarp of the Malaysian local Garcinia mangostana linn., The structure was characterised by Infrared red, UV-Visible and Nuclear Magnetic Resonance spectroscopic data. The fluorescence peak at 500nm in ethanol was not observed in PNIPAM microgel solution. The increase of colloidal size of the gel in the presence of α-mangostin was studied by Dynamic Light Scattering and Transmission Electron Microscope. The size of the particle also increases with increasing temperature up to 45⁰C after which it began to shrink. The TEM micrograph at 45°C showed a uniformly structured pattern of the gel occurs in the range of the lowest solution critical temperature.
Microbial keratitis is one of the most challenging complications of contact lens (CL) wear. Proper CL practice plays an important role to reduce the risk for contact lens related microbial keratitis (CLRMK). Methods: This multi-centre case-control study was conducted from January 2008 until June 2009 to determine the risk factors associated with CLRMK. Cases were defined as respondents who were treated for CLRMK, whilst controls were respondents who were contact lens wearers without microbial keratitis. Ninety four cases were compared to 94 controls to determine the risk factors for
CLRMK. Results: The predictors for CLRMK were: Not washing hands with soap before handling CL (aOR 2.979, CI 1.020, 8.701 p=0.046), not performing rubbing technique whilst cleaning the CL (aOR 3.006, CI 1.198, 7.538 p=0.019) and, not cleaning the lens case with multipurpose solution daily (aOR 3.242 CI 1.463, 7.186 p=0.004). Sleeping overnight with the CL in the eye (aOR 2.864, CI 0.978, 8.386 p=0.049) and overall non-compliance with lens care procedures (aOR 2.590, CI 1.003, 6.689 p=0.049) contributed significantly to CLRMK. Conclusion: Health education and promotion in contact lens care are important and should be conducted by eye care practitioners to reduce the occurrence of CLRMK.
A stability-indicating HPLC-UV method for the simultaneous determination of sildenafil citrate and dapoxetine hydrochloride in solution and tablet was developed. The mobile phase was comprised of acetonitrile and 0.2M ammonium acetate buffer. The analyte was eluted at 3.392min and 7.255min for sildenafil citrate and dapoxetine HCl respectively using gradient system at a flow rate of 1.5mL/min. The theoretical plates count was>2000, tailing factor
Formalin is a clear solution of 37% formaldehyde in water. It is used in dentistry as a disinfectant, antiseptic and mainly as tissue fixative for preserving biologic specimens for histopathologic examination. The human knowledge on systemic formaldehyde intoxication is inadequate as only few cases of formalin ingestion have been reported. This paper presents a brief communication of the adverse effect of formalin to the human tissue.
This study is an attempt to investigate the adsorption of petroleum hydrocarbon (toluene) from aqueous solutions using granular activated carbon (GAC) synthesized from oil palm shell (OPS) (referred as OPSbased GAC). This study involved a series of batch experiments to determine the adsorption equilibrium and kinetics. The batch experiments were conducted by shaking 200 mL toluene solution containing 0.4 g GAC (initial concentrations of 5, 15, 25 and 30 mg/L) at 180 rpm at 30°C. The OPS-based GAC achieved more than 80% toluene removal in all the experiments. The adsorption capacity of the OPSbased GAC estimated using Freundlich isotherm was 6.039 mg/g (L/mg)1/n. The adsorption kinetic study showed that the adsorption of toluene was of chemisorption as the experimental data fitted better to the pseudo-second-order kinetic model than the pseudo-first-order kinetic model.