Displaying publications 21 - 40 of 76 in total

Abstract:
Sort:
  1. Fulltext The implications of time on the ground on running economy: less is not always better
    Lussiana T, Patoz A, Gindre C, Mourot L, Hébert-Losier K
    J Exp Biol, 2019 03 18;222(Pt 6).
    PMID: 30787136 DOI: 10.1242/jeb.192047
    A lower duty factor (DF) reflects a greater relative contribution of leg swing versus ground contact time during the running step. Increasing time on the ground has been reported in the scientific literature to both increase and decrease the energy cost (EC) of running, with DF reported to be highly variable in runners. As increasing running speed aligns running kinematics more closely with spring-mass model behaviours and re-use of elastic energy, we compared the centre of mass (COM) displacement and EC between runners with a low (DFlow) and high (DFhigh) duty factor at typical endurance running speeds. Forty well-trained runners were divided in two groups based on their mean DF measured across a range of speeds. EC was measured from 4 min treadmill runs at 10, 12 and 14 km h-1 using indirect calorimetry. Temporal characteristics and COM displacement data of the running step were recorded from 30 s treadmill runs at 10, 12, 14, 16 and 18 km h-1 Across speeds, DFlow exhibited more symmetrical patterns between braking and propulsion phases in terms of time and vertical COM displacement than DFhigh DFhigh limited global vertical COM displacements in favour of horizontal progression during ground contact. Despite these running kinematics differences, no significant difference in EC was observed between groups. Therefore, both DF strategies seem energetically efficient at endurance running speeds.
    Matched MeSH terms: Running/physiology*
  2. Acute ingestion of hydrogen-rich water does not improve incremental treadmill running performance in endurance-trained athletes
    Ooi CH, Ng SK, Omar EA
    Appl Physiol Nutr Metab, 2020 May;45(5):513-519.
    PMID: 31675478 DOI: 10.1139/apnm-2019-0553
    There is emerging evidence that hydrogen-rich water (H2-water) has beneficial effects on the physiological responses to exercise. However, few studies investigate its ergogenic potential. This randomized controlled trial examined the effects of H2-water ingestion on physiological responses and exercise performance during incremental treadmill running. In a double-blind crossover design, 14 endurance-trained male runners (age, 34 ± 4 years; body mass, 63.1 ± 7.2 kg; height, 1.72 ± 0.05 m) were randomly assigned to ingest 2 doses of 290-mL H2-water or placebo on each occasion. The first bolus was given before six 4-min submaximal running bouts, and the second bolus was consumed before the maximal incremental running test. Expired gas, heart rate (HR), and ratings of perceived exertion (RPE) were recorded; blood samples were collected at the end of each submaximal stage and post maximal running test. Cardiorespiratory responses, RPE, and blood gas indices were not significantly different at each submaximal running intensity (range: 34%-91% maximal oxygen uptake) between H2-water and placebo trials. No statistical difference was observed in running time to exhaustion (618 ± 126 vs. 619 ± 113 s), maximal oxygen uptake (56.9 ± 4.4 vs. 57.1 ± 4.7 mL·kg-1·min-1), maximal HR (184 ± 7 vs. 184 ± 7 beat·min-1), and RPE (19 ± 1 vs. 19 ± 1) in the runners between the trials. The results suggest that the ingestion of 290 mL of H2-water before submaximal treadmill running and an additional dose before the subsequent incremental running to exhaustion were not sufficiently ergogenic in endurance-trained athletes. Novelty Acute ingestion of H2-water does not seem to be ergogenic for endurance performance. A small dose of H2-water does not modulate buffering capacity during intense endurance exercise in athletes.
    Matched MeSH terms: Running*
  3. Do subjective assessments of running patterns reflect objective parameters?
    Lussiana T, Gindre C, Mourot L, Hébert-Losier K
    Eur J Sport Sci, 2017 Aug;17(7):847-857.
    PMID: 28488928 DOI: 10.1080/17461391.2017.1325072
    Running patterns are often categorized into subgroups according to common features before data analysis and interpretation. The Volodalen® method is a simple field-based tool used to classify runners into aerial or terrestrial using a 5-item subjective rating scale. We aimed to validate the Volodalen® method by quantifying the relationship between its subjective scores and 3D biomechanical measures. Fifty-four runners ran 30 s on a treadmill at 10, 12, 14, 16, and 18 km h-1 while their kinematics were assessed subjectively using the Volodalen® method and objectively using 3D motion capture. For each runner and speed, two researchers scored the five Volodalen® items on a 1-to-5 scale, which addressed vertical oscillation, upper-body motion, pelvis and foot position at ground contact, and footstrike pattern. Seven 3D biomechanical parameters reflecting the subjective items were also collected and correlated to the subjective scores. Twenty-eight runners were classified as aerial and 26 as terrestrial. Runner classification did not change with speed, but the relative contribution of the biomechanical parameters to the subjective classification was speed dependent. The magnitude of correlations between subjective and objective measures ranged from trivial to very large. Five of the seven objective parameters significantly differed between aerial and terrestrial runners, and these parameters demonstrated the strongest correlations to the subjective scores. Our results support the validity of the Volodalen® method, whereby the visual appreciation of running gait reflected quantifiable objective parameters. Two minor modifications to the method are proposed to simplify its use and improve agreement between subjective and objective measures.
    Matched MeSH terms: Running/physiology*
  4. Fulltext Herbs in exercise and sports
    Chen CK, Muhamad AS, Ooi FK
    J Physiol Anthropol, 2012;31:4.
    PMID: 22738233 DOI: 10.1186/1880-6805-31-4
    The use of herbs as ergogenic aids in exercise and sport is not novel. Ginseng, caffeine, ma huang (also called 'Chinese ephedra'), ephedrine and a combination of both caffeine and ephedrine are the most popular herbs used in exercise and sports. It is believed that these herbs have an ergogenic effect and thus help to improve physical performance. Numerous studies have been conducted to investigate the effects of these herbs on exercise performance. Recently, researchers have also investigated the effects of Eurycoma longifolia Jack on endurance cycling and running performance. These investigators have reported no significant improvement in either cycling or running endurance after supplementation with this herb. As the number of studies in this area is still small, more studies should be conducted to evaluate and substantiate the effects of this herb on sports and exercise performance. For instance, future research on any herbs should take the following factors into consideration: dosage, supplementation period and a larger sample size.
    Matched MeSH terms: Running*
  5. Fulltext Caffeine and Beetroot Juice Optimize 1,000-m Performance: Shapley Additive Explanations Analysis
    Liu X, Huo L, Wang F, Wang T, Rong W, He Y
    Am J Mens Health, 2025;19(2):15579883251327907.
    PMID: 40145446 DOI: 10.1177/15579883251327907
    The 1,000-m run is a key component of university physical fitness assessments. Effective supplementation strategies to enhance performance and recovery in this test remain underexplored. This study aimed to evaluate the effects of caffeine (CAF) and beetroot juice (BJ) on 1,000-m performance and used SHapley Additive exPlanations (SHAP) analysis to identify key influencing factors. A randomized crossover design compared the effects of CAF (6 mg/kg body weight), BJ (70 mL providing 6.4 mmol of NO3-), and their combination with placebo (PLA) on 1,000-m running performance. Twenty healthy male participants took part in the study. Physiological, nutritional, and behavioral data were collected during each condition. SHAP analysis of a multilayer perceptron model quantified the relative importance of various performance determinants, providing a clear assessment of their contribution to the outcome. The CAF + BJ group performed significantly better than PLA (p  weight > age > nighttime sleep duration > nutritional strategy > average vertical jump height > grip strength > resting heart rate > time since last meal > alcohol consumption > height > smoking frequency. This study suggests that CAF and BJ supplementation may improve 1,000-m performance. SHAP analysis introduced a novel framework for identifying key factors, offering insights for targeted interventions. Tailored dietary supplement strategies that address critical physiological and lifestyle factors are important. Combining supplementation with these approaches can further enhance performance and recovery.
    Matched MeSH terms: Running/physiology
  6. Fulltext Three closely related (2E,2'E)-3,3'-(1,4-phenyl-ene)bis-[1-(meth-oxy-phen-yl)prop-2-en-1-ones]: supra-molecular assemblies in one dimension mediated by hydrogen bonding and C-H⋯π inter-actions
    Sim A, Chidan Kumar CS, Kwong HC, Then LY, Win YF, Quah CK, et al.
    Acta Crystallogr E Crystallogr Commun, 2017 Jun 01;73(Pt 6):896-900.
    PMID: 28638654 DOI: 10.1107/S2056989017007460
    In the title compounds, (2E,2'E)-3,3'-(1,4-phenyl-ene)bis-[1-(2-meth-oxy-phen-yl)prop-2-en-1-one], C26H22O4 (I), (2E,2'E)-3,3'-(1,4-phenyl-ene)bis-[1-(3-meth-oxy-phen-yl)prop-2-en-1-one], C26H22O4 (II) and (2E,2'E)-3,3'-(1,4-phenyl-ene)bis-[1-(3,4-di-meth-oxy-phen-yl)prop-2-en-1-one], C28H26O6 (III), the asymmetric unit consists of a half-mol-ecule, completed by crystallographic inversion symmetry. The dihedral angles between the central and terminal benzene rings are 56.98 (8), 7.74 (7) and 7.73 (7)° for (I), (II) and (III), respectively. In the crystal of (I), mol-ecules are linked by pairs of C-H⋯π inter-actions into chains running parallel to [101]. The packing for (II) and (III), features inversion dimers linked by pairs of C-H⋯O hydrogen bonds, forming R2(2)(16) and R2(2)(14) ring motifs, respectively, as parts of [201] and [101] chains, respectively.
    Matched MeSH terms: Running
  7. Fulltext Running designs that affect calories burned
    Zahayu Md Yusof, Masnita Misiran, Adyda Ibrahim
    Jurnal Sains Sukan & Pendidikan Jasmani, 2018;7(2):103-112.
    MyJurnal
    Balanced between good diet and regular physical activity is among the important factors in avoiding unhealthy weight gain. Our objective in this study was to investigate the amount of calorie loss against a variety of running exercises. In this study, an experiment on running as a calorie burning physical activities was conducted. Two factors were selected, the distance, and the level of difficulties. The result and statistical analysis concluded that both factors play significant roles in burning calories, with distance as being the most significant factor. The findings also suggest that other than increasing the distance, choosing a hilly terrain when training can give more efficient calories burn. There is no interaction between distance and the level of difficulties. Individuals should plan their workout accordingly only after knowing how many calories they burned through each activity. For individual with aims to burn more calories, an increase in distance and a hilly terrain is more favorable.
    Matched MeSH terms: Running
  8. Fulltext The comparison between concept mapping care plan and nursing care plan (nursing process)
    Rusnani Ab Latif, Akehsan Dahlan, Zamzaliza Ab Mulud, Mohd Zarawi Mat Nor
    Malaysian Journal of Medical Research, 2018;1(4):45-50.
    MyJurnal
    The major component in nursing education is attachmnet at clinical practices to give the students experience,
    responsibility and understanding in care of the patient. Nurse educators and the clinical nurse instructors are
    responsible for coordinating the education of nursing students in clinical area. Currently practice using nursing
    processes is more familiar to compare than concept mapping care plan among the nurses and nursing students.
    Nursing care plan or nursing process has been utilized at the clinical setting to assess the actual and potential
    health problems of the patients. However, the format of nursing care plans makes challenging to the students,
    especially for new students in semester one to gather the information based on patients problems. In addition,
    this nursing process evaluation is one of examination tools for them in running assessments. Therefore, the
    development of concept mapping care plan at clinical practices was used to evalaute the students academic
    achievement in clinical pratices. Concept mapping care plan was found to enhance the knowledge and
    understanding of the nursing students and also improving the quality of clinical education. Nursing students
    who have good skills will perform certain procedures better than students having fewer skills. This affects the
    quality of work in the future as either a higher quality or of poor quality.
    Matched MeSH terms: Running
  9. Application of parallel ensemble Monte Carlo technique in charge dynamics simulation
    Othman A, Umar R, Gopir G
    Sains Malaysiana, 2008;37.
    In the past, simulating charge dynamics in solid state devices, such as current mobility, transient current drift velocities are done on mainframe systems or on high performance computing facilities. This is due to the fact that, such simulations are costly in terms of computational requirements when implemented on a single processor-based personal computers (PCs). When simulating charge dynamics, large ensembles of particles are usually preferred, such as exceeding 40000 particles, to ensure a numerically sound result. When implementing this type of simulation on a single processor PCs using the conventional ensemble or single particle Monte Carlo method, the computational time is very long even on the fast 2.0 MHz PCs. Lately, a more efficient, easily made available tools and cost effective solution to this problem is the application of an array of PCs employed in a parallel application. This is done using a computer cluster network in a master-slave model. In this paper we report the development of a LINUX cluster for the purpose of implementing parallel ensemble Monte Carlo modelling for solid states device. We have proposed the use of Parallel Virtual Machine (PVM) standards when running the parallel algorithm of the ensemble MC simulation. Some results of the development are also presented in this paper.
    Matched MeSH terms: Running
  10. Observation of Two Excited B_{c}^{+} States and Measurement of the B_{c}^{+}(2S) Mass in pp Collisions at sqrt[s]=13  TeV
    Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Bergauer T, Brandstetter J, et al.
    Phys Rev Lett, 2019 Apr 05;122(13):132001.
    PMID: 31012626 DOI: 10.1103/PhysRevLett.122.132001
    Signals consistent with the B_{c}^{+}(2S) and B_{c}^{*+}(2S) states are observed in proton-proton collisions at sqrt[s]=13  TeV, in an event sample corresponding to an integrated luminosity of 143  fb^{-1}, collected by the CMS experiment during the 2015-2018 LHC running periods. These excited b[over ¯]c states are observed in the B_{c}^{+}π^{+}π^{-} invariant mass spectrum, with the ground state B_{c}^{+} reconstructed through its decay to J/ψπ^{+}. The two states are reconstructed as two well-resolved peaks, separated in mass by 29.1±1.5(stat)±0.7(syst)  MeV. The observation of two peaks, rather than one, is established with a significance exceeding five standard deviations. The mass of the B_{c}^{+}(2S) meson is measured to be 6871.0±1.2(stat)±0.8(syst)±0.8(B_{c}^{+})  MeV, where the last term corresponds to the uncertainty in the world-average B_{c}^{+} mass.
    Matched MeSH terms: Running
  11. Polymeric structure of (ethylenediamine)silver(I) 3-nitrobenzoate monohydrate
    Usman A, Fun HK, Chantrapromma S, Zhu HL, Wang XJ
    Acta Crystallogr C, 2003 Mar;59(Pt 3):m97-9.
    PMID: 12711770
    In the ternary title compound, catena-poly[[silver(I)-mu-ethylenediamine-kappa(2)N:N'] 3-nitrobenzoate monohydrate], [[Ag(C(2)H(8)N(2))](C(7)H(4)NO(4)) x H(2)O](n), the Ag atom is bicoordinated in a linear configuration by two different N atoms from two symmetry-related ethylenediamine ligands, thus giving linear polymeric chains with an [-Ag-N-C-C-N-](n) backbone running parallel to the a axis. In the crystal packing, these linear chains are interconnected by N-H...O and O-H...O hydrogen bonds to form layers parallel to the ab plane.
    Matched MeSH terms: Running
  12. Fulltext Decision making and performance of Malaysian rugby sevens referees
    Mohamad Nizam Nazarudin, Suppiah, Pathmanathan K., Mohamad Razali Abdullah, Mohd Sofian Omar Fauzee, Parnabas, Vincent, Nagoor Meera Abdullah
    Movement Health & Exercise, 2015;4(1):61-75.
    MyJurnal
    This study aims to examine the decision making by rugby sevens referees, and its relationship with the referees' performance. The instruments used in this study are the Rugby Referee Decision Making Test (α=.74) and the Referee Sevens Field Performance Evaluation (α=.94). It was administered to 132 rugby sevens referees (mean age 33.4 + 1.5 years; 132 males) from the Malaysian Rugby Union (MRU), which have been refereeing in 10 rugby sevens tournaments in Malaysia. Descriptive and Inferential statistics (one way ANOVA and Pearson's Correlation) were employed to analyse the data. Decision Making ( ̅= 24.13, SD=5.24) and performance ( ̅= 136.45, SD = 4.47) were identified at a moderate level. The findings indicated no significant differences [F= (3, 128) =.246, p>0.05] in the decision making across age level, but there were significant differences [F= (3, 128) =63.159, p
    Matched MeSH terms: Running
  13. Fulltext Medical Standby: An Experience at the 4(th) National Youth Camping and Motivation Program Organized by Maksak Malaysia
    Zakaria MI, Isa RM, Shah Che Hamzah MS, Ayob NA
    Malays J Med Sci, 2006 Jan;13(1):43-51.
    PMID: 22589590
    Medical standby is the provision of emergency medical care and first aid for participants and/or spectators in a pre-planned event. This article describes the framework and the demographics of a medical standby at the 4(th) National Youth Camping and Motivation Program in Pasir Puteh, Kelantan from 30(th) July until the 3(rd) August 2004. The framework of the medical team is described based on the work process of any medical stand by. A medical encounter form was created for the medical standby defining the type of case seen (medical or trauma), name, age, race and diagnosis of the patient. We concluded that interagency collaboration during the initial planning and during the event itself is needed to ensure the smooth running of the medical standby. Most of the medical encounters were minor illnesses which are similar to previous studies and there was no case transferred to the hospital during that period.
    Matched MeSH terms: Running
  14. Fulltext A Longitudinal Analysis of Daily Pill Burden and Likelihood of Optimal Adherence to Antiretroviral Therapy Among People Living With HIV Who Use Drugs
    Mohd Salleh NA, Richardson L, Kerr T, Shoveller J, Montaner J, Kamarulzaman A, et al.
    J Addict Med, 2018 3 10;12(4):308-314.
    PMID: 29521670 DOI: 10.1097/ADM.0000000000000403
    OBJECTIVES: Among people living with HIV (PLWH), high levels of adherence to prescribed antiretroviral therapy (ART) is required to achieve optimal treatment outcomes. However, little is known about the effects of daily pill burden on adherence amongst PLWH who use drugs. We sought to investigate the association between daily pill burden and adherence to ART among members of this key population in Vancouver, Canada.

    METHODS: We used data from the AIDS Care Cohort to Evaluate Exposure to Survival Services study, a long-running community-recruited cohort of PLWH who use illicit drugs linked to comprehensive HIV clinical records. The longitudinal relationship between daily pill burden and the odds of ≥95% adherence to ART among ART-exposed individuals was analyzed using multivariable generalized linear mixed-effects modeling, adjusting for sociodemographic, behavioural, and structural factors linked to adherence.

    RESULTS: Between December 2005 and May 2014, the study enrolled 770 ART-exposed participants, including 257 (34%) women, with a median age of 43 years. At baseline, 437 (56.7%) participants achieved ≥95% adherence in the previous 180 days. Among all interview periods, the median adherence was 100% (interquartile range 71%-100%). In a multivariable model, a greater number of pills per day was negatively associated with ≥95% adherence (adjusted odds ratio [AOR] 0.87 per pill, 95% confidence interval [CI] 0.84-0.91). Further analysis showed that once-a-day ART regimens were positively associated with optimal adherence (AOR 1.39, 95% CI 1.07-1.80).

    CONCLUSIONS: In conclusion, simpler dosing demands (ie, fewer pills and once-a-day single tablet regimens) promoted optimal adherence among PLWH who use drugs. Our findings highlight the need for simpler dosing to be encouraged explicitly for PWUD with multiple adherence barriers.

    Matched MeSH terms: Running
  15. Fulltext Stress analysis of engine camshaft from light metal
    Sharuddin Mohd Dahuri, Nor Hakimah Ahmad Subri, Norashady Mohd Noor
    Journal of Engineering and Science Research, 2018;2(1):37-44.
    MyJurnal
    his paper presents the structure and static model of engine camshaft analysis. For the purposes of this analysis, the finite element method is used. Camshaft is one of the critical components for effective and precise work of internal combustion engines. This camshaft rotates at high speed causing pressure and vibration in the system. Camshafts are also subject to varying fatigue burden due to cam plunger contact. These precise values are required to be determined to prevent failure in the camshaft. The objective of the project is to model and to perform pressure analysis on the camshaft machine. In this project the standard engine cam shafts are modeled and analyzed using the CATIA V5R21 software respectively. This model is created by the basic requirements of the engine. It is done with an existing background, such as the power of acting on cam by means of a valve while running at maxi mum speed. Here the approach becomes fully CAE based. CAE - based approaches enrich Research and limit the time span. A study was conducted to predict the behavior of the different camshafts structure of the material using the finite three - dimensional pressure of the element. Four types of materials such as Steel, Titanium, Aluminum and Magnesium are taken into account. FEA Stress and maximum displacement decisions are calculated and compared to all of the above materials. The conclusion is to focus on the material suitable for the camshaft to reduce the maximum displacement and weight. Titanium materials become the best material for camshaft manufacturing based on analysis.
    Matched MeSH terms: Running
  16. Fulltext A Review of Gelatin Source Authentication Methods
    Hameed AM, Asiyanbi-H T, Idris M, Fadzillah N, Mirghani MES
    Trop Life Sci Res, 2018 Jul;29(2):213-227.
    PMID: 30112151 MyJurnal DOI: 10.21315/tlsr2018.29.2.15
    Gelatin is a very popular pharmaceutical and food ingredient and the most studied ingredient in Halal researches. Interest in source gelatin authentication is based on religious and cultural beliefs, food fraud prevention and health issues. Seven gelatin authentication methods that have been developed include: nucleic acid based, immunochemical, electrophoretic analysis, spectroscopic, mass-spectrometric, chromatographic-chemometric and chemisorption methods. These methods are time consuming, and require capital intensive equipment with huge running cost. Reliability of gelatin authentication methods is challenged mostly by transformation of gelatin during processing and close similarities among gelatin structures. This review concisely presents findings and challenges in this research area and suggests needs for more researches on development of rapid authentication method and process-transformed gelatins.
    Matched MeSH terms: Running
  17. An integrated geophysical study of the quaternary basin at Olak Lempit – Banting Area, Selangor, Malaysia
    Abdul Rahim Samsudin, Umar Hamzah, Zuraidah Ramli
    Sains Malaysiana, 2007;36:159-163.
    An integrated geophysical study was conducted to investigate the subsurface regional structure and the presence of a Quaternary sedimentary basin in the Olak Lempit - Banting area of Selangor, Malaysia. A regional gravity survey and the high resolution reflection seismic were employed to determine the thickness and areal distribution of the alluvial sedimentary basin as well as to investigate the depth and topography of the bedrock in the study area. The sedimentary basin hosts one of the most important coastal alluvial aquifer which was used to cater the shortage of domestic water supply during the worst water crisis that hit the state of Selangor in 1998. The surface geological map shows that in general 70% of the study area is covered by Quaternary deposits of Beruas, Gula and Simpang Formations which overlie the sedimentary bedrock of Kenny Hill Formation. The Beruas Formation consists of mainly clay, sandy clay and peat of Holocene fluviatile-estuarine deposits, whereas the Gula Formation represents Holocene marine to estuarine sediments which mostly consists of clay and minor sand. The Simpang Formation (Pleistocene) is a continental deposit comprising of gravel, sand, clay and silt. The underlying Kenny Hill Formation consists of a monotonous sequence of interbedded shales, mudstones and sandstones. The rock is Carbonaceous in age and it forms an undulating surface topography in the eastern part of the study area. A total of 121 gravity stations were established using a La Coste & Romberg gravity meter and the elevations of most of the stations were determined barometrically using Tiernan-Wallace altimeters. The high resolution seismic reflection using the common mid point (CMP) or roll along technique was carried out using a 24 channel signal enhancement seismograph and high frequency geophones. A total length of about 1.7 km stacked seismic section has been acquired in this survey and a nearby borehole data was used for interpretation. A relative Bouguer anomaly map shows an elongated zone of low gravity anomaly trending approximately NW-SE which is interpreted to be the deposition center of the Quaternary basin. The interpreted gravity profiles running across the central area of the study area show that the basin has thickness varies from tenth to several hundred meters with maximum depth to bedrock of about 275m. A gravity profile which passes through the eastern edge of the basin was modeled with depth to bedrock of about 178m below ground which agrees very well with those obtained from the interpreted seicmic section and borehole data. The stacked seismic section shows several high amplitude parallel to sub-parallel reflection overlying discontinuos and low reflection pattern. Reflections on the eastern part of the section is much shallower than the one observed on the western part which clearly indicates the presence of basinal structure with a total interpreted depth to bedrock of about 200 meters.
    Matched MeSH terms: Running
  18. Fulltext Sensor application for soil treatment and behaviour
    Syahrul Affandi Saidi, Syarifah Idrus Sofia Syed Mohd Yamin, Mohd Sharizan Md Sarip, Wan Azani Mustafa
    Journal of Advanced Research in Applied Sciences and Engineering Technology, 2018;13(1):8-15.
    MyJurnal
    In Malaysia, it is estimated that almost 80 percent of the world's population today used palm oil in their daily lives. Malaysia is the second country exporting palm oil, about 39 percent of world palm oil output. Besides that, Malaysia also recorded about 44 per cent of world exports, making the palm industry very important for countries other than rubber and cocoa. However, to keep the palm industry running smoothly and constantly, there are many challenges to face. One is to maintain soil fertility because the soil can affect the growth of oil palm trees. With the use of this system, it will show the condition of soil behaviour to the farmer about the treatment given. Arduino board is used in this project which it is programmed to calculate and display the level of soil condition by using temperature sensor and soil moisture sensors as an input. This sensor will detect the level of soil moisture and temperature and it is easier for farmers to monitor the soil conditions. Controlled soil conditions can improve the soil's ability to maintain the fertility of palm trees and help plant growth suit to the weather and local climate.
    Matched MeSH terms: Running
  19. Fulltext Design, Construction and Testing of IoT Based Automated Indoor Vertical Hydroponics Farming Test-Bed in Qatar
    Chowdhury MEH, Khandakar A, Ahmed S, Al-Khuzaei F, Hamdalla J, Haque F, et al.
    Sensors (Basel), 2020 Oct 02;20(19).
    PMID: 33023097 DOI: 10.3390/s20195637
    Growing plants in the gulf region can be challenging as it is mostly desert, and the climate is dry. A few species of plants have the capability to grow in such a climate. However, those plants are not suitable as a food source. The aim of this work is to design and construct an indoor automatic vertical hydroponic system that does not depend on the outside climate. The designed system is capable to grow common type of crops that can be used as a food source inside homes without the need of large space. The design of the system was made after studying different types of vertical hydroponic systems in terms of price, power consumption and suitability to be built as an indoor automated system. A microcontroller was working as a brain of the system, which communicates with different types of sensors to control all the system parameters and to minimize the human intervention. An open internet of things (IoT) platform was used to store and display the system parameters and graphical interface for remote access. The designed system is capable of maintaining healthy growing parameters for the plants with minimal input from the user. The functionality of the overall system was confirmed by evaluating the response from individual system components and monitoring them in the IoT platform. The system was consuming 120.59 and 230.59 kWh respectively without and with air conditioning control during peak summer, which is equivalent to the system running cost of 13.26 and 25.36 Qatari Riyal (QAR) respectively. This system was circulating around 104 k gallons of nutrient solution monthly however, only 8-10 L water was consumed by the system. This system offers real-time notifications to alert the hydroponic system user when the conditions are not favorable. So, the user can monitor several parameters without using laboratory instruments, which will allow to control the entire system remotely. Moreover, the system also provides a wide range of information, which could be essential for plant researchers and provides a greater understanding of how the key parameters of hydroponic system correlate with plant growth. The proposed platform can be used both for quantitatively optimizing the setup of the indoor farming and for automating some of the most labor-intensive maintenance activities. Moreover, such a monitoring system can also potentially be used for high-level decision making, once enough data will be collected. This work presents significant opportunities for the people who live in the gulf region to produce food as per their requirements.
    Matched MeSH terms: Running
  20. Evaluation of wastewater treatment performance to a field-scale constructed wetland system at clogged condition: A case study of ammonia manufacturing plant
    Keng TS, Samsudin MFR, Sufian S
    Sci Total Environ, 2021 Mar 10;759:143489.
    PMID: 33248782 DOI: 10.1016/j.scitotenv.2020.143489
    Assessment of the treatment performance in the field-scale hybrid constructed wetland (CW) for ammonia manufacturing plant remains limited. After being in operations running on and off since 2014, the hybrid CW which treats effluent from the ammonia manufacturing plant in Peninsular, Malaysia has recently demonstrated the full clogging to the CW. It takes only 8 months to demonstrate a big deterioration of performance in 2019. Though the mechanism of clogging is not clear, which can be partially from inherent design problems or operational issues, nonetheless, it is important to evaluate how this clogging has impacted the effluent treatment performance and the continuous utilization of the CW. The purpose of this study is to evaluate the impact of the treatment performance on the ammoniacal nitrogen and COD removal when the CW is clogged. The result revealed that there is no impact on COD removal, but it has a substantial impact on the ammoniacal nitrogen removal. The ammoniacal nitrogen removal dropped to negative (outlet concentration is higher than inlet concentration) during the clogged period. Another observation is, the low removal rate also coincides with a high COD/N ratio, when the COD/N ratio increased to >2, the ammoniacal nitrogen removal rate dropped substantially, with the coefficient of determination, R2 of 40.5%. The root cause for the clogging to develop in a short period of time is unidentified. However, it is still worth noting that COD and ammoniacal nitrogen efficiency did not behave the same at the clogged CW.
    Matched MeSH terms: Running
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links