Displaying publications 41 - 60 of 166 in total

Abstract:
Sort:
  1. Ram S, Siar CH, Ismail SM, Prepageran N
    PMID: 15243480
    Tonsilloliths are very rare concretions found in the tonsillar crypt. They are usually single and unilateral, but occasionally may be multiple or bilateral. Small concretions in the tonsils are common, but well formed giant unilateral or bilateral tonsilloliths are extremely uncommon. Only two cases of bilateral tonsilloliths have so far been reported in the literature. A case of unilateral tonsillolith, mimicking bilateral tonsilloliths taken with the orthopantogram (OPT) in a 57-year-old Malaysian Indian female with squamous cell carcinoma of the oral cavity is described. Although the OPT is a reliable and standard panoramic X-ray unit used in dentistry, superimposition of a lesion involving one side of the jaw creates a pseudo or ghost image on the contralateral side leading to a misdiagnosis of bilateral lesions. This report highlights that tonsilloliths, though rare, should be considered in the differential diagnosis of radiopaque masses involving the mandibular ramus, and that investigations such as CT scan or MRI may be required to differentiate pseudo or ghost images from true bilateral pathologies.
  2. Siar CH, Jalil AA, Ram S, Ng KH
    J Oral Sci, 2004 Mar;46(1):51-3.
    PMID: 15141724
    Osteoma is a benign tumour consisting of mature bone tissue. It is an uncommon lesion that occurs mainly in the bones of the craniofacial complex. Only a few cases involving the condylar process have been reported. An osteoma of the left condyle causing limited mouth-opening in a 32-year-old Malaysian Chinese female is reported here to alert the practitioner to consider this lesion as a diagnostic possibility in instances of trismus or limited-mouth opening.
  3. Somasundaram SN, Shanmugam S, Subramanian B, Jaganathan R
    Int J Biol Macromol, 2016 Oct;91:1215-23.
    PMID: 27370748 DOI: 10.1016/j.ijbiomac.2016.06.084
    The present study was aimed to investigate the antioxidant and cytotoxicity activity against HCT-15 of fucoidan from Sargassum cinereum. Purification of fucoidan was done by DEAE cellulose and dialysis. Physicochemical characterization of fucoidan was analysed by calorimetric assay, FT-IR, HPLC and NMR. The extracted fucoidan contains 65.753% of fucose and 3.7±1.54% of sulphate respectively. HPLC results showed that the fucoidan contains the monosaccharide composition such as fucose, galactose, mannose and xylose. Antioxidant effect of fucoidan in Sargassum Cinereum was determined by DPPH. The maximum DPPH activity was found at the concentration of 100μg, where as the crude extract showed the scavenging activity was 63.58±0.56%. Cytotoxicity effect was done by MTT assay. Fucoidan extract caused about 50% of cell death after 24h of incubation with 75±0.9037μg/ml against HCT-15.
  4. Goh JH, Saravanan S, Ng WM, Looi LM, Ali R
    Malays Orthop J, 2010;4(1):50-52.
    MyJurnal
    We report a case of a 21 years old female who presented with a history of anterior knee pain for previous 3 months. Pain was localized to the anteromedial aspect of the left knee and aggravated by flexion. Clinical examination revealed a 2x2cm painful lump on the anteromedial aspect of the left medial condyle with no effusion. Magnetic resonance imaging revealed an anterosuperior tear of the medial collateral ligament. The patient subsequently underwent left knee arthroscopic examination. Two yellowish pedunculated masses arising from the anteromedial portion of the synovium were discovered and completely excised. Histopathological examination of the excision biopsy revealed pigmented villonodular synovitis (PVNS) with marked central necrosis. One year post excision, she is well with no signs or symptoms of recurrence. This case highlights an uncommon cause of anterior knee pain. Localized PVNS typically presents with mechanical symptoms, however, pain could arise from pedicle torsion and necrosis.
  5. Nazar Majeed Z, Philip K, Alabsi AM, Pushparajan S, Swaminathan D
    Dis Markers, 2016;2016:1804727.
    PMID: 28074077 DOI: 10.1155/2016/1804727
    Background. Several studies in the last decades have focused on finding a precise method for the diagnosis of periodontal disease in its early stages. Aim. To evaluate from current scientific literature the most common and precise method for gingival crevicular fluid (GCF) sample collection, biomarker analytical methods, and the variability of biomarker quantification, even when using the same analytical technique. Methodology. An electronic search was conducted on in vivo studies that presented clinical data on techniques used for GCF collection and biomarker analysis. Results. The results showed that 71.1%, 24.7%, and 4.1% of the studies used absorption, microcapillary, and washing techniques, respectively, in their gingival crevicular fluid collection. 73.1% of the researchers analyzed their samples by using enzyme-linked immunosorbent assay (ELISA). 22.6%, 19.5%, and 18.5% of the researchers included interleukin-1 beta (IL-1β), matrix metalloproteinase-8 (MMP-8), and tumor necrosis factor-alpha (TNF-α), respectively, in their studies as biomarkers for periodontal disease. Conclusion. IL-1β can be considered among the most common biomarkers that give precise results and can be used as an indicator of periodontal disease progression. Furthermore, paper strips are the most convenient and accurate method for gingival crevicular fluid collection, while enzyme-linked immunosorbent assay can be considered the most conventional method for the diagnosis of biofluids.
  6. Muthaiyah S, Anbananthen KSM, Phuong Lan NT
    F1000Res, 2021;10:899.
    PMID: 34745564 DOI: 10.12688/f1000research.72987.1
    Background Digital transformation is changing the structure and landscape of future banking needs with much emphasis on value creation. Autonomous banking solutions must incorporate on-the-fly processing for risky transactions to create this value. In an autonomous environment, access control with role and trust delegation has been said to be highly relevant. The aim of this research is to provide an end to end working solution that will enable autonomous transaction and task processing for banking. Method We illustrate the use case for task delegation with the aid of risk graphs, risk bands and finite state machines. This paper also highlights a step by step task delegation process using a risk ordering relation methodology that can be embedded into smart contracts. Results Task delegation with risk ordering relation is illustrated with six process owners that share immutable ledgers. Task delegation properties using Multi Agent Systems (MAS) is used to eliminate barriers for autonomous transaction processing. Secondly, the application of risk graph and risk ordering relation with reference to delegation of tasks is a novel approach that is nonexistent in RBAC. Conclusion The novelty of this study is the logic for task delegation and task policies for autonomous execution on autonomous banking platforms akin to the idea of federated ID (Liberty Alliance).
  7. Abd Aziz A, Yong KS, Ibrahim S, Pichiah S
    J Hazard Mater, 2012 Jan 15;199-200:143-50.
    PMID: 22100220 DOI: 10.1016/j.jhazmat.2011.10.069
    An enhanced ferromagnetic property, visible light active TiO(2) photocatalyst was successfully synthesized by supporting strontium ferrite (SrFe(12)O(19)) onto TiO(2) doped with nitrogen (N) and compared with N-doped TiO(2). The synthesized catalysts were further characterized with X-ray diffraction (XRD), transmission electron microscope (TEM), energy dispersive X-ray spectroscopy (EDS), BET surface area analysis, vibrating sample magnetometer (VSM), X-ray photon spectroscopy (XPS) and visible light spectroscopy analysis for their respective properties. The XRD and EDS revealed the structural and inorganic composition of N-TiO(2) supported on SrFe(12)O(19). The supported N-TiO(2) exhibited a strong ferromagnetic property with tremendous stability against magnetic property losses. It also resulted in reduced band gap (2.8 eV) and better visible light absorption between 400 and 800 nm compared to N-doped TiO(2). The photocatalytic activity was investigated with a recalcitrant phenolic compound namely 2,4-dichlorophenol (2,4-DCP) as a model pollutant under direct bright and diffuse sunlight exposure. A complete degradation of 2,4-DCP was achieved with an initial concentration of 50mg/L for both photocatalysts in 180 min and 270 min respectively under bright sunlight. Similarly the diffuse sunlight study resulted in complete degradation for supported N-TiO(2) and >85% degradation N-TiO(2), respectively. Finally the supported photocatalyst was separated under permanent magnetic field with a mass recovery ≈ 98% for further reuse.
  8. Liang S, Singh M, Dharmaraj S, Gam LH
    Dis Markers, 2010;29(5):231-42.
    PMID: 21206008 DOI: 10.3233/DMA-2010-0753
    Breast cancer is a leading cause of mortality in women. In Malaysia, it is the most common cancer to affect women. The most common form of breast cancer is infiltrating ductal carcinoma (IDC). A proteomic approach was undertaken to identify protein profile changes between cancerous and normal breast tissues from 18 patients. Two protein extracts; aqueous soluble and membrane associated protein extracts were studied. Thirty four differentially expressed proteins were identified. The intensities of the proteins were used as variables in PCA and reduced data of six principal components (PC) were subjected to LDA in order to evaluate the potential of these proteins as collective biomarkers for breast cancer. The protein intensities of SEC13-like 1 (isoform b) and calreticulin contributed the most to the first PC while the protein intensities of fibrinogen beta chain precursor and ATP synthase D chain contributed the most to the second PC. Transthyretin precursor and apolipoprotein A-1 precursor contributed the most to the third PC. The results of LDA indicated good classification of samples into normal and cancerous types when the first 6 PCs were used as the variables. The percentage of correct classification was 91.7% for the originally grouped tissue samples and 88.9% for cross-validated samples.
  9. Vikneswaran T, Gendeh BS, Tan VES, Phang KS, Saravanan K
    Med J Malaysia, 2005 Oct;60(4):485-8.
    PMID: 16570712
    Hemangiopericytoma is a very rare angiogenic tumor. In the nasal cavity, it can be considered malignant. It occurs in various parts of the body but those in the nasal cavity account for only 5% of total cases. Less than 200 cases have been reported worldwide involving the nose and paranasal sinuses. Due to its rarity a proper line of management has not been established to tackle this tumour. This article highlights two cases of hemangiopericytoma (HPC), one in an adult and the other in a child, presenting as an intranasal mass.
  10. Othman MK, Krishinan S, Yusof Z, W Isa WYH
    Cureus, 2023 Nov;15(11):e48405.
    PMID: 37942125 DOI: 10.7759/cureus.48405
    Premature ventricular complex (PVC) is one of the most common arrhythmias detected in young patients. We report a case of a young patient with symptomatic high-burden PVC suspected to originate from the posterior right ventricular outflow tract (RVOT) who underwent an electrophysiology study (EPS) and was subsequently successfully ablated with markedly reduced PVC burden. The following day, it was noted that there was a change in PVC morphology. A repeat 3D electroanatomical mapping localized the second PVC morphology to posterolateral RVOT and abolished it with radiofrequency ablation (RFA).
  11. Manoj D, Rajendran S, Murphy M, Jalil AA, Sonne C
    Chemosphere, 2023 Nov;340:139820.
    PMID: 37586499 DOI: 10.1016/j.chemosphere.2023.139820
    Over the past decades, increasing research in metal-organic frameworks (MOFs) being a large family of highly tunable porous materials with intrinsic physical properties, show propitious results for a wide range of applications in adsorption, separation, electrocatalysis, and electrochemical sensors. MOFs have received substantial attention in electrochemical sensors owing to their large surface area, active metal sites, high chemical and thermal stability, and tunable structure with adjustable pore diameters. Benefiting from the superior properties, MOFs and MOF-derived carbon materials act as promising electrode material for the detection of food contaminants. Although several reviews have been reported based on MOF and its nanocomposites for the detection of food contaminants using various analytical methods such as spectrometric, chromatographic, and capillary electrophoresis. But there no significant review has been devoted to MOF/and its derived carbon-based electrodes using electrochemical detection of food contaminants. Here we review and classify MOF-based electrodes over the period between 2017 and 2022, concerning synthetic procedures, electrode fabrication process, and the possible mechanism for detection of the food contaminants which include: heavy metals, antibiotics, mycotoxins, and pesticide residues. The merits and demerits of MOF as electrode material and the need for the fabrication of MOF and its composites/derivatives for the determination of food contaminants are discussed in detail. At last, the current opportunities, key challenges, and prospects in MOF for the development of smart sensing devices for future research in this field are envisioned.
  12. Mishra A, Mohan Viswanathan P, Ramasamy N, Panchatcharam S, Sabarathinam C
    Environ Sci Pollut Res Int, 2023 Oct;30(46):103225-103243.
    PMID: 37688695 DOI: 10.1007/s11356-023-29582-7
    The current study aims to investigate the spatiotemporal distribution of microplastics (MPs) in the Miri coast, targeting their occurrences, characterisation, and potential sources. For a periodical study, coastal sediments were collected from three different time intervals (monsoon, post-monsoon, and post-COVID) and subjected to stereomicroscope, ATR-FTIR, and SEM-EDX analyses. These results show a significant increase of MPs in post-COVID samples by approximately 218% and 148% comparatively with monsoon and post-monsoon samples, respectively. The highest concentration of MPs was detected near the river mouths and industrial areas where the waste discharge rate and anthropogenic activities dominate. Fibre-type MPs are the most abundant, with an average of nearly 64%, followed by fragments, films, microbeads, and foams. The most dominant polymer types were polytetrafluoroethylene (PTFE), polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyester (PET). Overall, the current study shows a better understanding of MPs occurrence and potential sources in the Miri coastal area.
  13. Pandurangan DK, Bodagala P, Palanirajan VK, Govindaraj S
    Int J Pharm Investig, 2016 Jan-Mar;6(1):56-62.
    PMID: 27014620 DOI: 10.4103/2230-973X.176488
    In the present investigation, solid lipid nanoparticles (SLNs)-loaded in situ gel with voriconazole drug was formulated. Further, the formulation was characterized for pH, gelling capacity, entrapment efficiency, in vitro drug release, drug content, and viscosity. Voriconazole is an antifungal drug used to treat various infections caused by yeast or other types of fungi. Film hydration technique was used to prepared SLNs from lecithin and cholesterol. Based on the entrapment efficiency 67.2-97.3% and drug release, the optimized formulation NF1 of SLNs was incorporated into in situ gels. The in situ gels were prepared using viscosity-enhancing polymers such as Carbopol and (hydroxypropyl)methyl cellulose (HPMC). Formulated SLN in situ gel formulations were characterized, which showed pH 4.9-7.1, drug content 65.69-96.3%, and viscosity (100 rpm) 120-620 cps. From the characterizations given above, F6 was optimized and evaluated for microbial assay and ocular irritation studies. Microbial assay was conducted by the cup-plate method using Candida albicans as the test organism. An ocular irritation study was conducted on albino rabbits. The results revealed that there was no ocular damage to the cornea, conjunctiva, or iris. Stability studies were carried out on the F6 formulation for 3 months, which showed that the formulation had good stability. These results indicate that the studied SLNs-loaded in situ gel is a promising vehicle for ocular delivery.
  14. Tevan, R., Govindaraju, Mugilan, Jayakumar, Saravanan, Govindan, Natanamurugaraj, Mohd Hasbi Ab. Rahim, Maniam, Gaanty Pragas, et al.
    MyJurnal
    A biological method was employed to synthesize silver nanoparticles through marine diatom Amphora sp. Antimicrobial efficacy test against different pathogenic bacteria were performed through synthesized silver nanoparticles. The physio-chemical properties of synthesized silver nanoparticles were studied using analytical techniques such as UV-Vis spectrophotometer, Field Emission Scanning Electron Microscopy (FESEM), EnergyDispersive X-ray Spectroscopy (EDX) and Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Powder Diffraction (XRD). UV-Vis color intensity study and higher magnification of the Field Emission Scanning Electron Microscopy image showed the synthesized silver nanoparticles were rod shaped with a size range from 42 nm to 46 nm. The synthesized nanoparticles exhibited antibacterial activities in varying magnitudes. About 10 mg/ml of silver nanoparticles were able to inhibit the growth of gram-negative bacteria while gram-positive bacteria were resistant towards similar concentrations of silver nanoparticles.
  15. Swathirajan CR, Vignesh R, Boobalan J, Solomon SS, Saravanan S, Balakrishnan P
    J Med Microbiol, 2017 Oct;66(10):1379-1382.
    PMID: 28901908 DOI: 10.1099/jmm.0.000514
    BACKGROUND: Sustainable suppression of HIV replication forms the basis of anti-retroviral therapy (ART) medication. Thus, reliable quantification of HIV viral load has become an essential factor to monitor the effectiveness of the ART. Longer turnaround-time (TAT), batch testing and technical skills are major drawbacks of standard real-time PCR assays.

    METHODS: The performance of the point-of-care Xpert HIV-1 viral load assay was evaluated against the Abbott RealTime PCR m2000rt system. A total of 96 plasma specimens ranging from 2.5 log10 copies ml-1 to 4.99 log10 copies ml-1 and proficiency testing panel specimens were used. Precision and accuracy were checked using the Pearson correlation co-efficient test and Bland-Altman analysis.

    RESULTS: Compared to the Abbott RealTime PCR, the Xpert HIV-1 viral load assay showed a good correlation (Pearson r=0.81; P<0.0001) with a mean difference of 0.27 log10 copies ml-1 (95 % CI, -0.41 to 0.96 log10 copies ml-1; sd, 0.35 log10 copies ml-1).

    CONCLUSION: Reliable and ease of testing individual specimens could make the Xpert HIV-1 viral load assay an efficient alternative method for ART monitoring in clinical management of HIV disease in resource-limited settings. The rapid test results (less than 2 h) could help in making an immediate clinical decision, which further strengthens patient care.

  16. Leong KH, Aziz AA, Sim LC, Saravanan P, Jang M, Bahnemann D
    Beilstein J Nanotechnol, 2018;9:628-648.
    PMID: 29527438 DOI: 10.3762/bjnano.9.59
    The utilisation of sunlight as an abundant and renewable resource has motivated the development of sustainable photocatalysts that can collectively harvest visible light. However, the bottleneck in utilising the low energy photons has led to the discovery of plasmonic photocatalysts. The presence of noble metal on the plasmonic photocatalyst enables the harvesting of visible light through the unique characteristic features of the noble metal nanomaterials. Moreover, the formation of interfaces between noble metal particles and semiconductor materials further results in the formation of a Schottky junction. Thereby, the plasmonic characteristics have opened up a new direction in promoting an alternative path that can be of value to the society through sustainable development derived through energy available for all for diverse applications. We have comprehensively prepared this review to specifically focus on fundamental insights into plasmonic photocatalysts, various synthesis routes, together with their strengths and weaknesses, and the interaction of the plasmonic photocatalyst with pollutants as well as the role of active radical generation and identification. The review ends with a pinnacle insight into future perspectives regarding realistic applications of plasmonic photocatalysts.
  17. Sim LC, Wong JL, Hak CH, Tai JY, Leong KH, Saravanan P
    Beilstein J Nanotechnol, 2018;9:353-363.
    PMID: 29515949 DOI: 10.3762/bjnano.9.35
    Carbon dots (CDs) and graphitic carbon nitride (g-C3N4) composites (CD/g-C3N4) were successfully synthesized by a hydrothermal method using urea and sugarcane juice as starting materials. The chemical composition, morphological structure and optical properties of the composites and CDs were characterized using various spectroscopic techniques as well as transmission electron microscopy. X-ray photoelectron spectroscopy (XPS) results revealed new signals for carbonyl and carboxyl groups originating from the CDs in CD/g-C3N4 composites while X-ray diffraction (XRD) results showed distortion of the host matrix after incorporating CDs into g-C3N4. Both analyses signified the interaction between g-C3N4 and CDs. The photoluminescence (PL) analysis indicated that the presence of too many CDs will create trap states at the CD/g-C3N4 interface, decelerating the electron (e-) transport. However, the CD/g-C3N4(0.5) composite with the highest coverage of CDs still achieved the best bisphenol A (BPA) degradation rate at 3.87 times higher than that of g-C3N4. Hence, the charge separation efficiency should not be one of the main factors responsible for the enhancement of the photocatalytic activity of CD/g-C3N4. Instead, the light absorption capability was the dominant factor since the photoreactivity correlated well with the ultraviolet-visible diffuse reflectance spectra (UV-vis DRS) results. Although the CDs did not display upconversion photoluminescence (UCPL) properties, the π-conjugated CDs served as a photosensitizer (like organic dyes) to sensitize g-C3N4 and injected electrons to the conduction band (CB) of g-C3N4, resulting in the extended absorption spectrum from the visible to the near-infrared (NIR) region. This extended spectral absorption allows for the generation of more electrons for the enhancement of BPA degradation. It was determined that the reactive radical species responsible for the photocatalytic activity were the superoxide anion radical (O2•-) and holes (h+) after performing multiple scavenging tests.
  18. Hak CH, Sim LC, Leong KH, Lim PF, Chin YH, Saravanan P
    Environ Sci Pollut Res Int, 2018 Sep;25(25):25401-25412.
    PMID: 29951757 DOI: 10.1007/s11356-018-2632-8
    In this work, natural sunlight successfully induced the deposition of gold (Au), silver (Ag), and palladium (Pd) nanoparticles (NPs) with 17.10, 9.07, and 12.70 wt% onto the surface of graphitic carbon nitride (g-C3N4). The photocatalytic evaluation was carried out by adopting Bisphenol A (BPA) as a pollutant under natural sunlight irradiation. The presence of noble metals was confirmed by EDX, HRTEM, and XPS analysis. The deposition of Ag NPs (7.9 nm) resulted in the degradation rate which was 2.15-fold higher than pure g-C3N4 due to its relatively small particle size, contributing to superior charge separation efficiency. Au/g-C3N4 unveiled inferior photoactivity because the LSPR phenomenon provided two pathways for electron transfer between Au NPs and g-C3N4 further diminished the performance. The improved degradation lies crucially on the particle size and Schottky barrier formation at the interface of M/g-C3N4 (M=Au, Ag, and Pd) but not the visible light harvesting properties. The mechanism insight revealed the holes (h+) and superoxide radical (•O2-) radical actively involved in photocatalytic reaction for all composites.
  19. Lim PF, Leong KH, Sim LC, Abd Aziz A, Saravanan P
    Environ Sci Pollut Res Int, 2019 Feb;26(4):3455-3464.
    PMID: 30515688 DOI: 10.1007/s11356-018-3821-1
    In this work, a sunlight-sensitive photocatalyst of nanocubic-like titanium dioxide (TiO2) and N-doped graphene quantum dots (N-GQDs) is developed through a simple hydrothermal and physical mixing method. The successful amalgamation composite photocatalyst characteristics were comprehensively scrutinized through various physical and chemical analyses. A complete removal of bisphenol A (BPA) is attained by a synthesized composite after 30 min of sunlight irradiation as compared to pure TiO2. This clearly proved the unique contribution of N-GQDs that enhanced the ability of light harvesting especially under visible light and near-infrared region. This superior characteristic enables it to maximize the absorbance in the entire solar spectrum. However, the increase of N-GQDs weight percentage has created massive oxygen vacancies that suppress the generation of active radicals. This resulted in a longer duration for a complete removal of BPA as compared to lower weight percentage of N-GQDs. Hence, this finding can offer a new insight in developing effective sunlight-sensitive photocatalysts for various complex organic pollutants degradation.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links