This work aims to give insight on the effect of accelerated weathering, i.e., the combination of ultraviolet (UV) exposure and water spraying, on the visual and mechanical properties of basalt fiber reinforced polymer (BFRP) composites. The solvent exchange method, sonication and high shear milling technique were used to prepare the nanocomposite laminates. Three types of laminates were fabricated, i.e., unmodified BFRP, nanosilica modified BFRP and graphene nanoplatelet (GNP) modified BFRP composites with the total fiber loading of 45 wt.%. Glass fiber reinforced polymer (GFRP) laminate was also prepared for performance comparison purposes between the natural and synthetic fibers. The laminates were exposed to UV with a total weathering condition of 504 h using a Quantum-UV accelerated weathering tester. The weathering condition cycle was set at 8 h 60 °C UV exposure and 4 h 50 °C condensation. The discoloration visual inspection on the tested specimen was observed under the optical microscope. The obtained results showed that the UV exposure and water absorption caused severe discoloration of the laminates due to photo-oxidation reaction. The effect of weathering conditions on tensile and flexural properties of unmodified BFRP composites indicated that the UV exposure and water absorption caused reduction by 12% in tensile strength and by 7% in flexural strength. It is also found that the reduction in tensile and flexural properties of nanomodified BFRP composites was smaller than the unmodified system. It concluded from this work, that the mineral based composites (i.e., BFRP) has high potential for structural applications owing to its better properties than synthetic based composites (i.e., GFRP).
Ethylenediaminetetraacetic acid (EDTA) can serve as a washing agent in the remediation of low-permeability layers contaminated by heavy metals (HMs). Therefore, batch adsorption experiments, where pure quartz (SM1) and mineral mixtures (SM2) were used as typical soil minerals (SMs) in low-permeability layers, were implemented to explore the effects of different EDTA concentrations, pH, and exogenous chemicals on the HM-SM-EDTA adsorption system. As the EDTA concentration increased, it gradually cut down the maximum Cd adsorption capacities of SM1 and SM2 from approximately 135 to 55 mg/kg and 2660 to 1453 mg/kg; and the maximum Pb adsorption capacities of SM1 and SM2 were reduced from 660 to 306 mg/kg and 19,677 to 19,262 mg/kg, respectively. When the initial mole ratio (MR = moles of HM ions/sum of moles of HM ions and EDTA) was closer to 0.5, the effect of EDTA was more effective. Additionally, EDTA worked well at pH below 7.0 and 4.0 for Cd and Pb, respectively. Low-molecular-weight organic acids (LMWOAs) affected the system mainly by bridging, complexation, adsorption site competition, and reductive dissolution. Cu2+, Fe2+ ions could significantly increase the Cd and Pb adsorption onto SM2. Notably, there were characteristic changes in mineral particles, including attachment of EDTA and microparticles, agglomeration, connection, and smoother surfaces, making the specific surface area (SSA) decrease from 16.73 to 12.59 m2/g. All findings indicated that EDTA could effectively and economically reduce the HM adsorption capacity of SMs at the reasonable MR value, contact time, and pH; EDTA reduced the HM adsorption capacity of SMs not only by complexation with HM ions but also by decreasing SSA and blocking active sites. Hence, the acquired insight from the presented study can help to promote the remediation of contaminated low-permeability layers in groundwater.
Climate change manifestation in the ocean, through warming, oxygen loss, increasing acidification, and changing particulate organic carbon flux (one metric of altered food supply), is projected to affect most deep-ocean ecosystems concomitantly with increasing direct human disturbance. Climate drivers will alter deep-sea biodiversity and associated ecosystem services, and may interact with disturbance from resource extraction activities or even climate geoengineering. We suggest that to ensure the effective management of increasing use of the deep ocean (e.g., for bottom fishing, oil and gas extraction, and deep-seabed mining), environmental management and developing regulations must consider climate change. Strategic planning, impact assessment and monitoring, spatial management, application of the precautionary approach, and full-cost accounting of extraction activities should embrace climate consciousness. Coupled climate and biological modeling approaches applied in the water and on the seafloor can help accomplish this goal. For example, Earth-System Model projections of climate-change parameters at the seafloor reveal heterogeneity in projected climate hazard and time of emergence (beyond natural variability) in regions targeted for deep-seabed mining. Models that combine climate-induced changes in ocean circulation with particle tracking predict altered transport of early life stages (larvae) under climate change. Habitat suitability models can help assess the consequences of altered larval dispersal, predict climate refugia, and identify vulnerable regions for multiple species under climate change. Engaging the deep observing community can support the necessary data provisioning to mainstream climate into the development of environmental management plans. To illustrate this approach, we focus on deep-seabed mining and the International Seabed Authority, whose mandates include regulation of all mineral-related activities in international waters and protecting the marine environment from the harmful effects of mining. However, achieving deep-ocean sustainability under the UN Sustainable Development Goals will require integration of climate consideration across all policy sectors.
Data on the mineral composition and content of one heavy metal measured in three different fruit flours prepared from ripe and unripe fruits (pulp and peel) are presented. The mineral composition (sodium (Na), potassium (K), magnesium (Mg), calcium (Ca), zinc (Zn), copper (Cu), iron (Fe) and manganese (Mn)) and content of one heavy metal (lead (Pb)) of the flours were analyzed by atomic absorption spectrophotometry. The analysis showed that the data can be used for differentiation between different fruits and stages of ripeness, as revealed by discriminant analysis and cluster analysis. The data provided can be used by researchers and scientists in the differentiation of fruits based on major and minor mineral elements.
The Transient Electro-Magnetic (TEM) geophysical technique was deployed to map and characterized the subsurface of Pahang River Basin along the East Coast Peninsula Malaysia. The data aimed at differentiating between the massive zones and the weak zones within the region, to also assess and differentiate the subsurface structures and comes up with recommendations for policy decision, formulation and plans on the flooding impact, surface water and groundwater managements, in addition to other environmental related issues ravaging the area. The data presented in this paper, showed the properties of the subsurface rocks underlain the region as beneficial to the Agriculturists; Climatologists; Engineers; Environmentalists; Geoscientists, Hydrologists and Policy formulation officers. The TEM data collection utilized a 100 m x 100 m single loop coil for both the Transmitter (Tx) loop and the Receiver (Rx) loop to produce a total surface area coverage of 10,000 m2 per survey line along a single profile. The total area covered in the data extended across an average area of 30 km x 40 km in parts of Maran, Temerloh and Jerantut districts, within the State of Pahang, East Coast, Peninsula Malaysia. The conductivity data recorded varied from -20 mS/m to about 440 mS/m at a maximum depth of about 375 m. On the other hand, the resistivity data recorded varied from 0 Oh-m to about 1000 Oh-m. The information derived from the data are intended for potential abstraction by the Malaysian Groundwater Management Board; the Department of Mineral and Geoscience; Department of Irrigation and Drainage; the Pahang State Water Board, and the Department of Agriculture.
This article describes the data of raw material compositions for formulating the diet for Indonesian short-fin eel, Anguilla bicolor Anguilla bicolor McClelland, 1844 elver. The data on growth performance, survival and feed utilization of eel elver from the formulated diet test results are also presented here. Four formulated diets and one commercial feed were tested for the eel elver. The formulated diet was formulated from animal and plant based protein sources such as; fish meal, cornmeal, soybean meal, fine bran, ebi-shrimp meal, golden snail meal, bloodmeal, and tapioca flour. Vitamins and minerals were added into the diet. In addition, probiotics and papain enzyme and its combination were also included into the experimental diets to boost the growth performance, survival and feed utilization of the fish. The tested treatments were; (A) commercial diet without probiotic and papain enzyme, (B) experimental diet without probiotic and papain enzyme, (C) experimental diet with probiotic 10 ml kg-1 feed, (D) experimental diet with papain enzyme 10 g kg-1 feed, (E) experimental diet with probiotic 10 ml kg-1 + papain 10 g kg-1 feed, (F) experimental diet with probiotic 5 ml kg-1 + papain 5 g kg-1 feed. Each experimental fish group was fed on an experimental diet twice a day at 08.00 AM and 06.00 PM at feeding level of 10% body weight for 60 days. The results showed that the weight gain ranged between 4.60 g to 5.92 g, daily growth rate between 0.063 g day-1 and 0.098 g per day-1, the specific growth rate varies from 0.72% day-1 to 1.35% day-1, survival rate 50.00% to 73.33%, feed conversion ratio from 2.35 to 4.17, and feed efficiency between 41.82% to 58.98%. The best treatment was found in fish fed on the experimental diet with papain enzyme 10 g kg-1 of feed.
The use of leaded gasoline adversely affects cardiovascular, nervous, and immune systems. Study projects to rule out different variables of prognostic importance in lead-exposed subjects. A total of 317 traffic wardens with 5 years of outdoor experience and Hb levels
This study highlights the importance of mineralogical composition for potential carbon dioxide (CO2) capture and storage of mine waste materials. In particular, this study attempts to evaluate the role of mineral carbonation of sedimentary mine waste and their potential reutilization as supplementary cementitious material (SCM). Limestone and gold mine wastes were recovered from mine processing sites for their use as SCM in brick-making and for evaluation of potential carbon sequestration. Dominant minerals in the limestone mine waste were calcite and akermanite (calcium silicate) while the gold mine waste was dominated by illite (iron silicate) and chlorite-serpentine (magnesium silicate). Calcium oxide, CaO and silica, SiO2, were the highest composition in the limestone and gold mine waste, respectively, with maximum CO2 storage of between 7.17 and 61.37%. Greater potential for CO2 capture was observed for limestone mine waste as due to higher CaO content alongside magnesium oxide. Mineral carbonation of the limestone mine waste was accelerated at smaller particle size of
Observations and modeling studies have shown that during CO2 injection into underground carbonate reservoirs, the dissolution of CO2 into formation water forms acidic brine, leading to fluid-rock interactions that can significantly impact the hydraulic properties of the host formation. However, the impacts of these interactions on the pore structure and macroscopic flow properties of host rock are poorly characterized both for the near-wellbore region and deeper into the reservoir. Little attention has been given to the influence of pressure drop from the near-wellbore region to reservoir body on disturbing the ionic equilibrium in the CO2-saturated brine and consequent mineral precipitation. In this paper, we present the results of a novel experimental procedure designed to address these issues in carbonate reservoirs. We injected CO2-saturated brine into a composite core made of two matching grainstone carbonate core plugs with a tight disk placed between them to create a pressure profile of around 250 psi resembling that prevailing in reservoirs during CO2 injection. We investigated the impacts of fluid-rock interactions at pore and continuum scale using medical X-ray CT, nuclear magnetic resonance, and scanning electron microscopy. We found that strong calcite dissolution occurs near to the injection point, which leads to an increase in primary intergranular porosity and permeability of the near injection region, and ultimately to wormhole formation. The strong heterogeneous dissolution of calcite grains leads to the formation of intra-granular micro-pores. At later stages of the dissolution, the internal regions of ooids become accessible to the carbonated brine, leading to the formation of moldic porosity. At distances far from the injection point, we observed minimal or no change in pore structure, pore roughness, pore populations, and rock hydraulic properties. The pressure drop of 250 psi slightly disturbed the chemical equilibrium of the system, which led to minor precipitation of sub-micron sized calcite crystals but due to the large pore throats of the rock, these deposits had no measurable impact on rock permeability. The trial illustrates that the new procedure is valuable for investigating fluid-rock interactions by reproducing the geochemical consequences of relatively steep pore pressure gradients during CO2 injection.
The recent expansion of oil palm (OP, Elaeis guineensis) plantations into tropical forest peatlands has resulted in ecosystem carbon emissions. However, estimates of net carbon flux from biomass changes require accurate estimates of the above ground biomass (AGB) accumulation rate of OP on peat. We quantify the AGB stocks of an OP plantation on drained peat in Malaysia from 3 to 12 years after planting using destructive harvests supported by non-destructive surveys of a further 902 palms. Peat specific allometric equations for palm (R2 = 0.92) and frond biomass are developed and contrasted to existing allometries for OP on mineral soils. Allometries are used to upscale AGB estimates to the plantation block-level. Aboveground biomass stocks on peat accumulated at ~6.39 ± 1.12 Mg ha-1 per year in the first 12 years after planting, increasing to ~7.99 ± 0.95 Mg ha-1 yr-1 when a 'perfect' plantation was modelled. High inter-palm and inter-block AGB variability was observed in mature classes as a result of variations in palm leaning and mortality. Validation of the allometries defined and expansion of non-destructive inventories across alternative plantations and age classes on peat would further strengthen our understanding of peat OP AGB accumulation rates.
Contaminant removal from water involves various technologies among which adsorption is considered to be simple, effective, economical, and sustainable. In recent years, nanocomposites prepared by combining clay minerals and polymers have emerged as a novel technology for cleaning contaminated water. Here, we provide an overview of various types of clay-polymer nanocomposites focusing on their synthesis processes, characteristics, and possible applications in water treatment. By evaluating various mechanisms and factors involved in the decontamination processes, we demonstrate that the nanocomposites can overcome the limitations of individual polymer and clay components such as poor specificity, pH dependence, particle size sensitivity, and low water wettability. We also discuss different regeneration and wastewater treatment options (e.g., membrane, coagulant, and barrier/columns) using clay-polymer nanocomposites. Finally, we provide an economic analysis of the use of these adsorbents and suggest future research directions.
Nanoscale lipid bilayers, or nanoliposomes, are generally spherical vesicles formed by the dispersion of phospholipid molecules in a water-based medium by energy input. The other nanoscale object discussed in this entry, i.e., tocosome, is a recently introduced bioactive carrier made mainly from tocopheryl phosphates. Due to their bi-compartmental structure, which consists of lipidic and aqueous compartments, these nanocarriers are capable of carrying hydrophilic and hydrophobic material separately or simultaneously. Nanoliposomes and tocosomes are able to provide protection and release of sensitive food-grade bioactive materials in a sustained manner. They are being utilized for the encapsulation of different types of bioactive materials (such as drugs, vaccines, antimicrobials, antioxidants, minerals and preservatives), for the enrichment and fortification of different food and nutraceutical formulations and manufacturing of functional products. However, a number of issues unique to the nutraceutical and food industry must first be resolved before these applications can completely become a reality. Considering the potentials and promises of these colloidal carrier systems, the present article reviews various aspects of nanoliposomes, in comparison with tocosomes, including the ingredients used in their manufacture, formation mechanisms and issues pertaining to their application in the formulation of health promoting dietary supplements and functional food products.
The biophysical data presented in this article were collected in the east coast of Peninsular Malaysia from May to November 2009. These monthly surface data were obtained from 32 stations along the coastal-offshore transect and were analyzed to understand the spatial and temporal distributions of biophysical parameters during different monsoon seasons. The data presented here include sea surface temperature (SST), sea surface salinity (SSS), Secchi disk depth (SDD), Chlorophyll-a (Chl-a), suspended particulate matter (SPM), mineral suspended solid (MSS) and chromophoric dissolved organic matter (CDOM).
The lack of efficient hydrogen storage material is one of the bottlenecks for the large-scale implementation of hydrogen energy. Here, a series of new hydrogen storage materials, i.e., anilinide-cyclohexylamide pairs, are proposed via the metallation of an aniline-cyclohexylamine pair. DFT calculations show that the enthalpy change of hydrogen desorption (ΔHd) can be significantly tuned from 60.0 kJ per mol-H2 for the pristine aniline-cyclohexylamine pair to 42.2 kJ per mol-H2 for sodium anilinide-cyclohexylamide and 38.7 kJ per mol-H2 for potassium anilinide-cyclohexylamide, where an interesting correlation between the electronegativity of the metal and the ΔHd was observed. Experimentally, the sodium anilinide-cyclohexylamide pair was successfully synthesised with a theoretical hydrogen capacity of 4.9 wt%, and the hydrogenation and dehydrogenation cycle can be achieved at a relatively low temperature of 150 °C in the presence of commercial catalysts, in clear contrast to the pristine aniline-cyclohexylamine pair which undergoes dehydrogenation at elevated temperatures.
Background: Recently, chronic kidney disease (CKD)-mineral and bone disorder (MBD) has become one of common complications occurring in CKD patients. Therefore, development of a new treatment for CKD-MBD is very important in the clinic. In China, Fucoidan (FPS), a natural compound of Laminaria japonica has been frequently used to improve renal dysfunction in CKD. However, it remains elusive whether FPS can ameliorate CKD-MBD. FGF23-Klotho signaling axis is reported to be useful for regulating mineral and bone metabolic disorder in CKD-MBD. This study thereby aimed to clarify therapeutic effects of FPS in the CKD-MBD model rats and its underlying mechanisms in vivo and in vitro, compared to Calcitriol (CTR). Methods: All male rats were divided into four groups: Sham, CKD-MBD, FPS and CTR. The CKD-MBD rat models were induced by adenine administration and uninephrectomy, and received either FPS or CTR or vehicle after induction of renal injury for 21 days. The changes in parameters related to renal dysfunction and renal tubulointerstitial damage, calcium-phosphorus metabolic disorder and bone lesion were analyzed, respectively. Furthermore, at sacrifice, the kidneys and bone were isolated for histomorphometry, immunohistochemistry and Western blot. In vitro, the murine NRK-52E cells were used to investigate regulative actions of FPS or CTR on FGF23-Klotho signaling axis, ERK1/2-SGK1-NHERF-1-NaPi-2a pathway and Klotho deficiency. Results: Using the modified CKD-MBD rat model and the cultured NRK-52E cells, we indicated that FPS and CTR alleviated renal dysfunction and renal tubulointerstitial damage, improved calcium-phosphorus metabolic disorder and bone lesion, and regulated FGF23-Klotho signaling axis and ERK1/2-SGK1-NHERF-1-NaPi-2a pathway in the kidney. In addition, using the shRNA-Klotho plasmid-transfected cells, we also detected, FPS accurately activated ERK1/2-SGK1-NHERF-1-NaPi-2a pathway through Klotho loss reversal. Conclusion: In this study, we emphatically demonstrated that FPS, a natural anti-renal dysfunction drug, similar to CTR, improves renal injury-related calcium-phosphorus metabolic disorder and bone abnormality in the CKD-MBD model rats. More importantly, we firstly found that beneficial effects in vivo and in vitro of FPS on phosphorus reabsorption are closely associated with regulation of FGF23-Klotho signaling axis and ERK1/2-SGK1-NHERF-1-NaPi-2a pathway in the kidney. This study provided pharmacological evidences that FPS directly contributes to the treatment of CKD-MBD.
Introduction: Rice husk has portrayed great potential in becoming a sustainable biomass source in producing silica, cellulose and carbon materials, which garnered widespread interest among researchers. The objective of the current study is to determine the morphological and compositional changes in rice husk due to the synergistic effects of ther- mochemical treatment. Methods: Washed and dried rice husk was blended into a fine powder and then subjected to step-wise heat treatment and acid digestion to produce white ash. The intermittent products, as well as the original rice husk and the final ash product, were characterised using analytical instruments to document the morphologi- cal and chemical composition changes. Results: This report highlights the production of pure rice husk ash using a step-wise treatment using a combination of thermochemical treatment and carbonisation. The results showed that a partial breakdown of the lignocellulose components was achieved using directed thermal treatment at low tem- perature. The ionic impurities were leached out in subsequent heated acid treatment. Thereafter, the carbonaceous organic matter was completely converted to carbon during the carbonisation of the sample and the remaining carbon residue was removed during calcination. High purity ash contained agglomerated and nanostructured silica in the dimensions of 20 to 50 nm in the amorphous form. Conclusion: The step-wise treatment allowed systematic removal of each compound while maintaining the amorphous mineral phase of silica and avoiding carbon fixation. Under- standing the effect of each treatment offers insight to produce purer silica from rice husk.
Systemic lupus erythematosus (SLE) is an autoimmune disease characterized by multiple organ involvement, including the skin, joints, kidneys, lungs, central nervous system and the haematopoietic system, with a large number of complications. Despite years of study, the etiology of SLE remains unclear; thus, safe and specifically targeted therapies are lacking. In the last 20 years, researchers have explored the potential of nutritional factors on SLE and have suggested complementary treatment options through diet. This study systematically reviews and evaluates the clinical and preclinical scientific evidence of diet and dietary supplementation that either alleviate or exacerbate the symptoms of SLE. For this review, a systematic literature search was conducted using PubMed, Scopus and Google Scholar databases only for articles written in the English language. Based on the currently published literature, it was observed that a low-calorie and low-protein diet with high contents of fiber, polyunsaturated fatty acids, vitamins, minerals and polyphenols contain sufficient potential macronutrients and micronutrients to regulate the activity of the overall disease by modulating the inflammation and immune functions of SLE.
The edible shoots of Dendrocalamus asper (family Poaceae) is an underutilised food. The
present work was conducted to evaluate the nutritional compositions, biological activities, and
phytochemical contents of the shoots of D. asper obtained from different regions of Malaysia,
Peninsular (DP) and East Malaysia (DS). The nutritional analysis was conducted using the
Official Methods of Analysis of the AOAC International. All minerals were quantified using
an inductively coupled plasma-mass spectrometer, except for potassium which was measured
using a flame atomic absorption spectrometer. Total phenolic content (TPC) was determined
using the Folin-Ciocalteu method. Antibacterial and antifungal activities were assayed using
a colourimetric broth microdilution method, while antioxidant activity was tested using DPPH
radical scavenging activity, ferric-reducing antioxidant power, and cellular antioxidant activity (CAA) assays. Enzyme inhibitory activities were examined using α-amylase and α-glucosidase. Both bamboo shoots (boiled at 100°C for 20 min) were high in moisture (> 93 g/100 g
FW), crude protein (> 21 g/100 g DW), and crude fibre contents (> 9 g/100 g DW), but low in
fat content (< 4 g/100 g DW). Potassium was the most abundant mineral at 205.67 and 203.83
µg/100 g DW of bamboo shoots of DP and DS, respectively. The extracts (hexane, ethyl
acetate, ethanol, and water) of both shoots showed stronger antifungal activity than antibacterial activity against selected human pathogens. All extracts of DP shoots demonstrated higher
CAA in HeLa cells and α-amylase inhibitory activity than that of DS shoots. In contrast, the
extracts of DS shoots exhibited stronger inhibition on α-glucosidase and contained higher
TPC than that of DP shoots. The D. asper shoots obtained from the Peninsular Malaysia and
East Malaysia contained different types of secondary metabolites which account for the differences in the biological activities. In conclusion, D. asper shoots have potential as a nutritional
and functional food.
Mango is one of the popular fruits in Malaysia and has been used in the jam, puree and drinks production. Production of food products using mango pulp has generated by-products such as peel and kernel. Disposal of these by-products will cause environmental pollution if not properly treated. Mango peel contains high nutritional composition and antioxidant properties and can be utilised as food ingredients. The objectives of this study are to determine the nutritional composition and antioxidant properties of the peels of two selected mango varieties, namely Golden Lily and Chokanan. Analysis of proximate composition, minerals, total phenolic compounds, carotenoids, and antioxidant activity (DPPH and ABTS) were carried out in this study. Results of the proximate analysis showed that the peels of both mango varieties were a good source of fibre, which were 14.45% for Golden Lily and 14.89% for Chokanan. The crude fat, crude protein, and total carbohydrate of Chokanan peel (2.62%, 4.67% and 57.74%, respectively) were higher than the Golden Lily peel (1.13%, 2.90% and 53.16%, respectively). Contrastingly, the moisture content of the Golden Lily peel (24.67%) was higher than the Chokanan peel (16.61%). Potassium was the main mineral found in both Golden Lily and Chokanan mango peels (8802.10 mg/kg and 8443.60 mg/kg, respectively). The total phenolic compounds in the peels of both mango varieties were not significantly different. The Chokanan peel contained a higher carotenoids content (35.26 µg/g) than the Golden Lily peel (15.03 µg/g). The ABTS value for Chokanan peel was higher (1406.00 μmol TE/g) than Golden Lily peel (1314.00 μmol TE/g). This study showed that Chokanan and Golden Lily mango peels have the potential to be utilised as ingredient in food products due to their high fibre content.
Lecuran tar, walaupun dikelaskan sebagai kecederaan kimia, disebabkan oleh perbezaan mekanisma kecederaan dan kesukaran untuk mengeluarkan agen daripada kulit tanpa menyebabkan kerosakan kulit dengan lebih lanjutnya, merupakan satu masalah yang sukar untuk diselesaikan. Terutamanya, apabila pesakit pediatrik terlibat. Lecuran tar biasanya merupakan kecederaan pekerjaan dan kebanyakannya berlaku kepada lelaki dewasa. Dua kes dibentangkan di sini, seorang budak lelaki berusia enam tahun dan seorang gadis berusia 15 tahun yang mengalami luka lecuhan tar dan berjaya dirawat dengan menggunakan enema minyak mineral Fleet® dan paraffin tulle Bactigras®, yang mudah didapati di kebanyakan hospital.