MyMedR

Displaying publications 41 - 60 of 384 in total

Abstract:

Sort:

Fulltext The study of commercial titanium dioxide (TiO2) degussa P25 for the adsorption of acidic dye

Nur Shazwani Abdul Mubarak, S. Sabar, Ali H. Jawad

Science Letters, 2020;14(1):68-83.
MyJurnal

Commercial titanium dioxide Degussa P25 (TiO2) was used for the adsorption of reactive red 120
(RR120) dye in a batch system. The optimization functions such as solution pH (3-12), adsorbent dosage (0.02 g-1.2 g), and initial dye concentration (30-400 mg/L) were studied. The equilibrium adsorption data for RR120 dye was analyzed by two types of isotherm models which are Langmuir and Freundlich models. The adsorption at equilibrium showed a better fit for linear Langmuir isotherm with the adsorption capacity, qmax of 18.62 mg/g at 303 K. The adsorption kinetic was well-described by pseudosecond order model. TiO2 showed a decent outcome due to the ability to adsorb target pollutants with theadded advantage of providing large hydroxyl groups (OH) on the surface of TiO2 so that pollutants can be adsorbed by interacting on the surface of OH.

Matched MeSH terms: Titanium
Fulltext The loading and unloading properties of various arch wires as a function of cross sectional dimension and inter bracket span width system

Mathew, Thomas

Malaysian Dental Journal, 2011;32(1):28-40.
MyJurnal

It is the aim of all clinicians to accomplish biological tooth movement, which implies the use of low, continuous force. Constant unrelented search for a better wire, which can deliver optimal orthodontic force, has led to the invention of a lot of orthodontic wires such as Stainless steel, Beta Titanium, Nickel Titanium and multi stranded wires. In this study, the loading and unloading properties of 0.016 inch, 0.016x0.022 inch and 0.017x0.025 inch dimensions of stainless steel, conventional NiTi, Super elastic NiTi, and TMA arch wires were determined by means of a modified three point bending test for two inter bracket widths of 5 mm and 6.5 mm for deflection of 1 to 3 mm. The applied forces dependence on cross-sectional size differs from the linear-elastic prediction in super elastic NiTi wires. The stainless steel wires had the highest force values on all the three dimensions and cross section. On loading and unloading, TMA wires had force values in-between stainless steel, conventional NiTi and super elastic NiTi. The conventional NiTi had much lower force values compared to stainless steel and TMA and were linearly progressing compared to Super elastic NiTi. On loading and unloading the super elastic NiTi had force values in the range of conventional NiTi and had constant forces on higher deflection. The studies showed that the force value was comparatively higher in 5 mm inter bracket width than the 6.5 mm inter bracket width for all the cross section and dimension of wires.

Matched MeSH terms: Titanium
Fulltext The effect of binders towards immobilized PANi-TiO2 system during photocatalytic energy conversion

Mohd Fairul Sharin, Muhammad Azam

Journal of Engineering and Science Research, 2017;1(2):73-78.
MyJurnal

Three types of binder PVA, PVC and PVA/PVC mixtures have been evaluated for PANi-TiO2 immobilized system. These binders have been varied to several weights of loading for optimization purposes. As a result, it shows that higher loading of binders improved the photodegradation of RR4 dye but the mechanical properties of each immobilized system started to decreases. This behavior occurs due to the immobilized particles coated on the plate easy to peel off despite weak attachment toward to the continuous photodegradation operation system. Therefore 4 times of dipping PVA and PVC layers was selected as the optimum loading of binders to the PANi/TiO2 system during photocatalytic degradation of Reactive Red 4 with the rate constant of 0.5568 K/min for PVA and 0.5742 K/min for PVC. Meanwhile for PVA/PVC mixture binder system at 4 times dipping showed the highest rate constant of photodegradation of RR4 dye with 0.6026 K/min. In addition, SEM analysis has also been carried out for further investigation.

Matched MeSH terms: Titanium
The combined effect of dental post and cement materials on fracture resistance and fracture mode of endodontically-treated teeth

Mohamed Abdulmunem, Hadijah Binti Abdullah, Noor Hayaty Binti Abu Kasim, Ali Dabbagh

Sains Malaysiana, 2015;44:1189-1194.

The aim of this study was to investigate the simultaneous influence of various dental posts and cementation materials on the fracture resistance and failure mode of the endodontically-treated teeth. Sixty endodontically treated upper central incisors were randomly divided into two main groups, each consisted of three subgroups restored with titanium, fiber and stainless steel posts. The posts in the first and second groups were luted with zinc phosphate and composite resin cements, respectively. Composite cores were built-up over the specimens and then retained with nickel-chromium crowns. Specimens were thermocycled and then loaded at 135o until failures were observed. The obtained data of fracture resistances and failure modes were analyzed using Two-way ANOVA and the Chi-Square tests, respectively. The results showed that the zinc phosphate cement resulted in relatively higher fracture resistances. However, luting of dental posts with composite resin provided more restorable failures in endodontically-treated teeth. Moreover, the teeth restored by fiber posts exhibited desirable fracture resistances with more restorable failure modes, compared with those restored by titanium or stainless steel posts.

Matched MeSH terms: Titanium
Fulltext The biological seal of the implant-soft tissue interface evaluated in a tissue-engineered oral mucosal model

Chai WL, Brook IM, Palmquist A, van Noort R, Moharamzadeh K

J R Soc Interface, 2012 Dec 7;9(77):3528-38.
PMID: 22915635 DOI: 10.1098/rsif.2012.0507

For dental implants, it is vital that an initial soft tissue seal is achieved as this helps to stabilize and preserve the peri-implant tissues during the restorative stages following placement. The study of the implant-soft tissue interface is usually undertaken in animal models. We have developed an in vitro three-dimensional tissue-engineered oral mucosal model (3D OMM), which lends itself to the study of the implant-soft tissue interface as it has been shown that cells from the three-dimensional OMM attach onto titanium (Ti) surfaces forming a biological seal (BS). This study compares the quality of the BS achieved using the three-dimensional OMM for four types of Ti surfaces: polished, machined, sandblasted and anodized (TiUnite). The BS was evaluated quantitatively by permeability and cell attachment tests. Tritiated water (HTO) was used as the tracing agent for the permeability test. At the end of the permeability test, the Ti discs were removed from the three-dimensional OMM and an Alamar Blue assay was used for the measurement of residual cells attached to the Ti discs. The penetration of the HTO through the BS for the four types of Ti surfaces was not significantly different, and there was no significant difference in the viability of residual cells that attached to the Ti surfaces. The BS of the tissue-engineered oral mucosa around the four types of Ti surface topographies was not significantly different.

Matched MeSH terms: Titanium
The bactericidal potential of LLDPE with TiO2/ZnO nanocomposites against multidrug resistant pathogens associated with hospital acquired infections

Harun NH, Mydin RBSMN, Sreekantan S, Saharudin KA, Basiron N, Seeni A

J Biomater Sci Polym Ed, 2020 10;31(14):1757-1769.
PMID: 32498665 DOI: 10.1080/09205063.2020.1775759

The emerging polymer nanocomposites have received industrial interests in diverse fields because of their added value in metal oxide-based nanocomposites, such as titanium (TiO2) and zinc oxide (ZnO). Linear low-density polyethylene (LLDPE)-based polymer has recently generated a huge market in the healthcare industry. TiO2 and ZnO are well known for their instant photocatalytic killing of hospital-acquired infections, especially multidrug-resistant (MDR) pathogens. This study investigated the actions of LLDPE/TiO2/ZnO (1:3) nanocomposites in different weight% against two representative MDR pathogens, namely, methicillin-resistant Staphylococcus aureus (MRSA) and Klebsiella pneumonia (K.pneumoniae). Antibacterial activities were quantified according to international standard guidelines of CLSI MO2-A11 (static condition) and ASTM E-2149 (dynamic condition). Preliminary observation via a scanning electron microscope revealed that LLDPE matrix with TiO2/ZnO nanocomposites changed the bacterial morphology and reduced the bacterial adherence and biofilm formation. Furthermore, a high ZnO weight ratio killed both types of pathogens. The bactericidal potential of the nanocomposite is highlighted by the enhancements in photocatalytic activity, zinc ion release and reactive species, and bacteriostatic/bactericidal activity against bacterial growth. This study provides new insights into the MDR-bactericidal potential of LLDPE with TiO2/ZnO nanocomposites for targeted healthcare applications.

Matched MeSH terms: Titanium
The abilities of three Nickel-Titanium mechanized systems to negotiate and shape MB2 canals in extracted maxillary first molars-a Micro-Computed Tomographic study

Ahmed HMA

Int Endod J, 2019 Nov;52(11):1671-1672.
PMID: 31592539 DOI: 10.1111/iej.13196
Matched MeSH terms: Titanium*
Fulltext The Thermal Effect Associated With CO2 Laser Gingivecttomy Of Tissues Surrounding Plasma Coated Titanium Implants. A Preliminary Study

Mahmood, W.A., Watkinson, A.C., Rooney, J.

Ann Dent, 2000;7(1):-.
MyJurnal

The CO2 laser has been actively used clinically for soft tissue surgery. The advantages have been widely acknowledged. In implant related tissue surgery, the use .6f CO2 laser has been debated on whether the heat generated during the procedure would be detrimental to the bone thus losing the implants through disosseointegration. In this preliminary work, CO2 laser was used to perform a simulated gingivectomy of tissue surrounding plasma coated titanium implants. The purpose was to observe the pattern of heat generated at different levels of the implant body. The safe power range and standard precaution was also identified. The results suggested that power output between 6 Watt to 8 Watt in repeated pulsed mode with duration of 5 seconds is considered safe. With this mode the operator

Matched MeSH terms: Titanium
Fulltext The Photocatalytic Effects of Modified Hydrothermal Nanotitania Extraction on the Skin and Behavior of Sprague-Dawley Rats

Harun AM, Awang H, Noor NFM, Makhatar NM, Yusoff ME, Affandi NDN, et al.

Biomed Res Int, 2021;2021:6173143.
PMID: 34859102 DOI: 10.1155/2021/6173143

BACKGROUND: Potential antibacterial substances, such as titanium dioxide (TiO2), are being extensively studied throughout the research world. A modified hydrothermal nanotitania extraction was shown to inhibit Staphylococcus aureus growth in the laboratory. However, the toxicity effect of the extract on rats is unknown. In this study, we observed the effects of a modified hydrothermal nanotitania extraction on the skin and behavior of Sprague-Dawley rats.
METHODS: Sprague-Dawley (Rattus norvegicus) rats were used as the experimental animals. The skin around the dorsum of the tested animals was shaved and pasted with 0.1 mg and 0.5 mg of the nanotitania extraction. The color and condition of the pasted area and the behavior of the animals were observed.
RESULTS: 0.1 mg nanotitania extraction application on the dorsum of the rat produced no skin color changes at day 1, day 3, day 5, or day 7 postapplication. There were no changes in their behavior up to day 7 with no skin rashes or skin scratches seen or fur changes. However, 0.5 mg of nanotitania extraction resulted in redness and less fur regrowth at day 7.
CONCLUSIONS: A 0.1 mg modified nanotitania extraction was observed to have no effect on the skin of Sprague-Dawley rats.

Matched MeSH terms: Titanium/isolation & purification*; Titanium/pharmacology*; Titanium/toxicity
Fulltext The Influence of Ziegler-Natta and Metallocene Catalysts on Polyolefin Structure, Properties, and Processing Ability

Shamiri A, Chakrabarti MH, Jahan S, Hussain MA, Kaminsky W, Aravind PV, et al.

Materials (Basel), 2014 Jul 09;7(7):5069-5108.
PMID: 28788120 DOI: 10.3390/ma7075069

50 years ago, Karl Ziegler and Giulio Natta were awarded the Nobel Prize for their discovery of the catalytic polymerization of ethylene and propylene using titanium compounds and aluminum-alkyls as co-catalysts. Polyolefins have grown to become one of the biggest of all produced polymers. New metallocene/methylaluminoxane (MAO) catalysts open the possibility to synthesize polymers with highly defined microstructure, tacticity, and steroregularity, as well as long-chain branched, or blocky copolymers with excellent properties. This improvement in polymerization is possible due to the single active sites available on the metallocene catalysts in contrast to their traditional counterparts. Moreover, these catalysts, half titanocenes/MAO, zirconocenes, and other single site catalysts can control various important parameters, such as co-monomer distribution, molecular weight, molecular weight distribution, molecular architecture, stereo-specificity, degree of linearity, and branching of the polymer. However, in most cases research in this area has reduced academia as olefin polymerization has seen significant advancements in the industries. Therefore, this paper aims to further motivate interest in polyolefin research in academia by highlighting promising and open areas for the future.

Matched MeSH terms: Titanium
Fulltext The Effect of Welding Current and Electrode Force on the Heat Input, Weld Diameter, and Physical and Mechanical Properties of SS316L/Ti6Al4V Dissimilar Resistance Spot Welding with Aluminum Interlayer

Taufiqurrahman I, Ahmad A, Mustapha M, Lenggo Ginta T, Ady Farizan Haryoko L, Ahmed Shozib I

Materials (Basel), 2021 Feb 27;14(5).
PMID: 33673716 DOI: 10.3390/ma14051129

Welding parameters obviously determine the joint quality during the resistance spot welding process. This study aimed to investigate the effect of welding current and electrode force on the heat input and the physical and mechanical properties of a SS316L and Ti6Al4V joint with an aluminum interlayer. The weld current values used in this study were 11, 12, and 13 kA, while the electrode force values were 3, 4, and 5 kN. Welding time and holding time remained constant at 30 cycles. The study revealed that, as the welding current and electrode force increased, the generated heat input increased significantly. The highest tensile-shear load was recorded at 8.71 kN using 11 kA of weld current and 3 kN of electrode force. The physical properties examined the formation of a brittle fracture and several weld defects on the high current welded joint. The increase in weld current also increased the weld diameter. The microstructure analysis revealed no phase transformation on the SS316L interface; instead, the significant grain growth occurred. The phase transformation has occurred on the Ti6Al4V interface. The intermetallic compound layer was also investigated in detail using the EDX (Energy Dispersive X-Ray) and XRD (X-Ray Diffraction) analyses. It was also found that both stainless steel and titanium alloy have their own fusion zone, which is indicated by the highest microhardness value.

Matched MeSH terms: Titanium
Fulltext The Development of Non-Enzymatic Glucose Biosensors Based on Electrochemically Prepared Polypyrrole-Chitosan-Titanium Dioxide Nanocomposite Films

Al-Mokaram AMAAA, Yahya R, Abdi MM, Mahmud HNME

Nanomaterials (Basel), 2017 May 31;7(6).
PMID: 28561760 DOI: 10.3390/nano7060129

The performance of a modified electrode of nanocomposite films consisting of polypyrrole-chitosan-titanium dioxide (Ppy-CS-TiO₂) has been explored for the developing a non-enzymatic glucose biosensors. The synergy effect of TiO₂ nanoparticles (NPs) and conducting polymer on the current responses of the electrode resulted in greater sensitivity. The incorporation of TiO₂ NPs in the nanocomposite films was confirmed by X-ray photoelectron spectroscopy (XPS) spectra. FE-SEM and HR-TEM provided more evidence for the presence of TiO₂ in the Ppy-CS structure. Glucose biosensing properties were determined by amperommetry and cyclic voltammetry (CV). The interfacial properties of nanocomposite electrodes were studied by electrochemical impedance spectroscopy (EIS). The developed biosensors showed good sensitivity over a linear range of 1-14 mM with a detection limit of 614 μM for glucose. The modified electrode with Ppy-CS nanocomposite also exhibited good selectivity and long-term stability with no interference effect. The Ppy-CS-TiO₂ nanocomposites films presented high electron transfer kinetics. This work shows the role of nanomaterials in electrochemical biosensors and describes the process of their homogeneous distribution in composite films by a one-step electrochemical process, where all components are taken in a single solution in the electrochemical cell.

Matched MeSH terms: Titanium
Targeting microRNAs using nanotechnology in pulmonary diseases

Dua K, Chellappan DK, Singhvi G, de Jesus Andreoli Pinto T, Gupta G, Hansbro PM

Panminerva Med, 2018 Dec;60(4):230-231.
PMID: 30563304 DOI: 10.23736/S0031-0808.18.03459-6
Matched MeSH terms: Titanium/chemistry
TENS for surgical stabilisation of acetabular fracture in the skeletally immature: A novel technique

Razak KAA, Ghani KHA, Musa AA

Injury, 2021 Jan;52(1):90-94.
PMID: 33168201 DOI: 10.1016/j.injury.2020.11.004

BACKGROUND: Acetabular fractures in childhood are rare and the literature is scarce to describe a standard protocol in surgical management of these injuries. As the patient is still growing, it warrants a detailed assessment with a sound surgical plan if operative intervention is deemed necessary to prevent late complications. Throughout literature, most fixation rely on using pins, screws, plates or combination of the three which require large surgical exposure and risk of secondary physeal injury, hence we come up with a method of using the Titanium Elastic Nail System (TENS) to overcome this issue. We describe a novel technique in managing acetabular fractures in this group of patients using the TENS.
METHOD: An 8 year old girl with a diagnosis of right anterior column posterior hemitransverse acetabular fracture was fixed with 3 TENS for supra-acetabular, anterior column and posterior column fragments. Surgery was performed in a minimally invasive manner. No drilling was performed during the surgery and implant insertion is done manually.
RESULTS: Advantages of this procedure include minimally invasive surgery with smaller wounds, minimal intraoperative bleeding and theoretically reduces the risk of premature fusion of the triradiate cartilage. Patient is allowed early rehabilitation with this method.
CONCLUSION: This novel method provides an alternative to traditional usage of wires, pins, plates and screws as is described in most literature. However, it requires the surgeon to appreciate that the safe corridors for the implant are much narrower than adults. We recommend this technique for fractures that are deemed suitable for intramedullary fixation and further research in the future will be needed.

Matched MeSH terms: Titanium
Fulltext Systematic review of toxicity profiles on Nano-TiO2 for cancer therapy

Nur Hazirah Mohd Azlan, Rabiatul Basria S.M.N. Mydin, Manganting, Ernest

Malaysian Journal of Medicine and Health Sciences, 2018;14(102):1-7.
MyJurnal

With the increasing clinical use of titanium dioxide nanoparticles (nano-TiO2), a better understanding of their safety in the human use is critical. The present study aims to review the potential application of nano-TiO2 as targeted cancer therapy based on their toxicity risk which highly dependent on their physio-chemical properties. Methods: This review was performed based on PRISMA-P protocol that begin with literature searching on the selected databases; PubMed, Springer Link, Science Direct and general search engine; Google Scholar from 2013 to 2018. Studies retrieved by the pre-determined keywords (titanium dioxide nanoparticles, toxicity, genotoxicity, cytotoxicity, targeted cancer therapy) that assessed toxicity risk of nano-TiO2 in cancer therapeutics were included. Results: The search retrieved 252 articles. Assessment of eligibility by application of inclusion criteria yielded 14 articles. Nano-TiO2 induced cytotoxicity and genotoxicity in dose and time-dependent manner killing the cancerous cells. All studies used primary particles size < 100 nm with mean of 39.38 and standard deviation of 30.47 which is lower than the mean denoting diameter distribution from selected studies are concentrated from the mean. Conclusion: This review suggest that TiO2 nanoparticles can be considered as an ideal candidate for drug-delivery vehicle for targeted cancer therapy by specifically tailored their physio-chemical properties of this nanoparticles according to desired target site and functions to ensure its optimal efficacy.

Matched MeSH terms: Titanium
Fulltext Synthesis, characterization, and performance evaluation of multilayered photoanodes by introducing mesoporous carbon and TiO2 for humic acid adsorption

Hosseini S, Jahangirian H, Webster TJ, Soltani SM, Aroua MK

Int J Nanomedicine, 2016;11:3969-78.
PMID: 27574426 DOI: 10.2147/IJN.S96558

Nanostructured photoanodes were prepared via a novel combination of titanium dioxide (TiO2) nanoparticles and mesoporous carbon (C). Four different photoanodes were synthesized by sol-gel spin coating onto a glassy substrate of fluorine-doped tin oxide. The photocatalytic activities of TiO2, TiO2/C/TiO2, TiO2/C/C/TiO2, and TiO2/C/TiO2/C/TiO2 photoanodes were evaluated by exposing the synthesized photoanodes to UV-visible light. The photocurrent density observed in these photoanodes confirmed that an additional layer of mesoporous carbon could successfully increase the photocurrent density. The highest photocurrent density of ~1.022 mA cm(-2) at 1 V/saturated calomel electrode was achieved with TiO2/C/C/TiO2 under an illumination intensity of 100 mW cm(-2) from a solar simulator. The highest value of surface roughness was measured for a TiO2/C/C/TiO2 combination owing to the presence of two continuous layers of mesoporous carbon. The resulting films had a thickness ranging from 1.605 µm to 5.165 µm after the calcination process. The presence of double-layer mesoporous carbon resulted in a 20% increase in the photocurrent density compared with the TiO2/C/TiO2 combination when only a single mesoporous carbon layer was employed. The improved performance of these photoanodes can be attributed to the enhanced porosity and increased void space due to the presence of mesoporous carbon. For the first time, it has been demonstrated here that the photoelectrochemical performance of TiO2 can be improved by integrating several layers of mesoporous carbon. Comparison of the rate of removal of humic acid by the prepared photoanodes showed that the highest performance from TiO2/C/C/TiO2 was due to the highest photocurrent density generated. Therefore, this study showed that optimizing the sequence of mesoporous carbon layers can be a viable and inexpensive method for enhanced humic acid removal.

Matched MeSH terms: Titanium/chemistry*
Fulltext Synthesis, characterization and advanced sustainable applications of titanium dioxide nanoparticles: A review

Irshad MA, Nawaz R, Rehman MZU, Adrees M, Rizwan M, Ali S, et al.

Ecotoxicol Environ Saf, 2021 Apr 01;212:111978.
PMID: 33561774 DOI: 10.1016/j.ecoenv.2021.111978

Nanotechnology is capturing great interest worldwide due to their stirring applications in various fields. Among nanoparticles (NPs), titanium dioxide (TiO2) NPs have been widely used in daily life and can be synthesized through various physical, chemical, and green methods. Green synthesis is a non-toxic, cost-effective, and eco-friendly route for the synthesis of NPs. Plenty of work has been reported on the green, chemical, physical and biological synthesis of TiO2 NPs and these NPs can be characterized through high tech. instruments. In the present review, dense data have been presented on the comparative synthesis of TiO2 NPs with different characteristics and their wide range of applications. Among the TiO2 NPs synthesis techniques, the green methods have been proven to be efficient than chemical synthesis methods because of the less use of precursors, time-effectiveness, and energy-efficiency during the green synthesis procedures. Moreover, this review describes the types of plants (shrubs, herbs and trees), microorganisms (bacteria, fungi and algae), biological derivatives (proteins, peptides, and starches) employed for the synthesis of TiO2 NPs. The TiO2 NPs can be effectively used for the treatment of polluted water and positively affected the plant physiology especially under abiotic stresses but the response varied with types, size, shapes, doses, duration of exposure, metal species along with other factors. This review also highlights the regulating features and future standpoints for the measurable enrichment in TiO2 NPs product and perspectives of TiO2 NPs reliable application.

Matched MeSH terms: Titanium*
Synthesis of titanium dioxide nanoparticles via sucrose ester micelle-mediated hydrothermal processing route

Anwar N, Kassim A, Lim H, Zakarya S, Huang N

Sains Malaysiana, 2010;39:261-265.

Titanium dioxide nanoparticles were synthesized via low-temperature sucrose ester micelle-mediated hydrothermal processing route using titanium isopropoxide as the precursor. X-ray diffractometer revealed that the samples possessed a mixed crystalline phases consisting of anatase and brookite in which anatase was the main phase. Upon increasing the hydrothermal reaction temperature, the degree of crystallinity of the nanoparticles improved and their morphology transformed from bundles of needles to rods and to spheres. Photocatalytic behaviour of the as-synthesized nanoparticles was investigated by photodegradation of methylene blue solution in an ultraviolet A irradiating photoreactor. The as-synthesized nanoparticles exhibited higher photocatalytic performance as compared to the commercial counterpart.

Matched MeSH terms: Titanium
Synthesis of nanostructured titanium dioxide layer onto kaolin hollow fibre membrane via hydrothermal method for decolourisation of reactive black 5

Mohtor NH, Othman MHD, Bakar SA, Kurniawan TA, Dzinun H, Norddin MNAM, et al.

Chemosphere, 2018 Oct;208:595-605.
PMID: 29890498 DOI: 10.1016/j.chemosphere.2018.05.159

Hydrothermal method has been proven to be an effective method to synthesise the nanostructured titanium dioxide (TiO2) with good morphology and uniform distribution at low temperature. Despite of employing a well-known and commonly used glass substrate as the support to hydrothermally synthesise the nanostructured TiO2, this study emphasised on the application of kaolin hollow fibre membrane as the support for the fabrication of kaolin/TiO2 nanorods (TNR) membrane. By varying the hydrothermal reaction times (2 h, 6 h, and 10 h), the different morphology, distribution, and properties of TiO2 nanorods on kaolin support were observed by field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), atomic force microscope (AFM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). It was found that the well-dispersed of TiO2 nanorods have improved the surface affinity of kaolin/TNR membrane towards water, allowing kaolin/TNR membrane prepared from 10 h of hydrothermal reaction to exhibit the highest water permeation of 165 L/h.m2.bar. In addition, this prepared membrane also showed the highest photocatalytic activity of 80.3% in the decolourisation of reactive black 5 (RB5) under UV irradiation. On top of that, the kaolin/TNR membrane prepared from 10 h of hydrothermal reaction also exhibited a good resistance towards photocorrosion, enabling the reuse of this membrane for three consecutive cycles of photocatalytic degradation of RB5 without showing significant reduction in photocatalytic efficiency towards the decolourisation of RB5.

Matched MeSH terms: Titanium/chemistry*
Fulltext Synthesis of nanopartical-based binary oxide electrode tio2-zro2 with carrot-derived natural dye extract for dye sensitized solar cell (DSSC) application

Win, S. Y., Win, T. T., Maung, Y. M., Soe, K. K. K., Kyaw, T. T., Tan, C. K., et al.

Pertanika Journal of Science & Technology, 2015;23(1):119-125.
MyJurnal

Dye-sensitized solar cell (DSSC) is the third generation of thin film solar cell. In this work, carrot fruit dye was prepared and used in DSSC as a sensitizer. TiO2–ZrO2 fine binary oxide was mechanochemically prepared and made paste. TiO2–ZrO2 paste (colloidal) was deposited onto FTO/glass in two ways, i.e. as single and double coatings by rolling method. It was immersed in the carrot solution to get dyed cell. The dyed TiO2-ZrO2-FTO/glass cell was offset with the FTO/glass cell coated with adhesive carbon paste. Photovoltaic properties of prepared TiO2–ZrO2 DSSC cell were measured. Results showed that the efficiency of double coating cell was greater than that of the single coating cell. According to the fill factor from the experiments, both the DSSC cells were acceptable for industrial requirement. Hence, it can be concluded that the results obtained were acceptable in the use of cost-effective and eco-favourable dye-sensitized solar cell.

Matched MeSH terms: Titanium

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links