Displaying publications 61 - 80 of 841 in total

Abstract:
Sort:
  1. Loke SC, Kanesvaran R, Yahya R, Fisal L, Wong TW, Loong YY
    Ann Acad Med Singap, 2009 Dec;38(12):1074-80.
    PMID: 20052443
    INTRODUCTION: Intravenous calcium gluconate has been used to prevent postoperative hypocalcaemia (POH) following parathyroidectomy for secondary hyperparathyroidism in chronic kidney disease (CKD).

    MATERIALS AND METHODS: Retrospective data were obtained for 36 patients with CKD stage 4 and 5 after parathyroid surgery, correlating albumin-corrected serum calcium with the infusion rate of calcium gluconate. Calcium flux was characterised along with excursions out of the target calcium range of 2 to 3 mmol/L. With this data, an improved titration regimen was constructed.

    RESULTS: Mean peak efflux rate (PER) from the extracellular calcium pool was 2.97 mmol/h occurring 26.6 hours postoperatively. Peak calcium efflux tended to occur later in cases of severe POH. Eighty-one per cent of patients had excursions outside of the target calcium range of 2 to 3 mmol/L. Mean time of onset for hypocalcaemia was 2 days postoperatively. Hypocalcaemia was transient in 25% and persistent in 11% of patients.

    CONCLUSION: A simple titration regimen was constructed in which a 10% calcium gluconate infusion was started at 4.5 mL/h when serum calcium was <2 mmol/L, then increased to 6.5 mL/h and finally to 9.0 mL/h if calcium continued falling. Preoperative oral calcium and calcitriol doses were maintained. Blood testing was done 6-hourly, but when a higher infusion rate was needed, 4-hourly blood testing was preferred. Monitoring was discontinued if no hypocalcaemia developed in the fi rst 4 days after surgery. If hypocalcaemia persisted 6 days after surgery, then the infusion was stopped with further monitoring for 24 hours.

    Matched MeSH terms: Calcium/blood*; Calcium Gluconate/administration & dosage*
  2. Lee KT, Bhatia S, Mohamed AR, Chu KH
    Chemosphere, 2006 Jan;62(1):89-96.
    PMID: 15996711
    High performance sorbents for flue gas desulfurization can be synthesized by hydration of coal fly ash, calcium sulfate, and calcium oxide. In general, higher desulfurization activity correlates with higher sorbent surface area. Consequently, a major aim in sorbent synthesis is to maximize the sorbent surface area by optimizing the hydration conditions. This work presents an integrated modeling and optimization approach to sorbent synthesis based on statistical experimental design and two artificial intelligence techniques: neural network and genetic algorithm. In the first step of the approach, the main and interactive effects of three hydration variables on sorbent surface area were evaluated using a full factorial design. The hydration variables of interest to this study were hydration time, amount of coal fly ash, and amount of calcium sulfate and the levels investigated were 4-32 h, 5-15 g, and 0-12 g, respectively. In the second step, a neural network was used to model the relationship between the three hydration variables and the sorbent surface area. A genetic algorithm was used in the last step to optimize the input space of the resulting neural network model. According to this integrated modeling and optimization approach, an optimum sorbent surface area of 62.2m(2)g(-1) could be obtained by mixing 13.1g of coal fly ash and 5.5 g of calcium sulfate in a hydration process containing 100ml of water and 5 g of calcium oxide for a fixed hydration time of 10 h.
    Matched MeSH terms: Calcium Sulfate/chemistry*; Calcium Compounds/chemistry*
  3. Hamzah N, Sarbon NM, Amin AM
    J Food Sci Technol, 2015 Aug;52(8):4773-84.
    PMID: 26243898 DOI: 10.1007/s13197-014-1622-1
    This study aimed to determine the effects of 2-5 wash cycles and the addition of tetrasodium pyrophosphate (TSPP) (0 %, 0.05 Surimi% and 0.1 % w/w)-with or without the addition of 0.4 % calcium chloride (CaCl2)-on the physical properties such as texture, colour, expressible moisture and microstructure of Cobia (Rachycentron canadum) surimi gel. The highest breaking force (484.85 g) was obtained with the addition 0.1 % TSPP alone on the fifth wash. However, a combination of 0.1 and 0.4 % CaCl2 in surimi gels at wash cycle 5 resulted in the highest degree of whiteness (86.8 %), as well as total expressible moisture (2.785 %) and deformation (17.11 mm). The highest surimi gel strength (6,923 g.mm) was obtained after three wash cycles with the addition of 0.1 % TSPP +0.4 % CaCl2. The physical properties of Cobia fish surimi gels were affected by the number of wash cycles and treatments with TSPP and CaCl2.
    Matched MeSH terms: Calcium Chloride
  4. Vazifehkhah Ghaffari B, Kouhnavard M, Aihara T, Kitajima T
    Biomed Res Int, 2015;2015:135787.
    PMID: 25960999 DOI: 10.1155/2015/135787
    Various types of neurons exhibit subthreshold resonance oscillation (preferred frequency response) to fluctuating sinusoidal input currents. This phenomenon is well known to influence the synaptic plasticity and frequency of neural network oscillation. This study evaluates the resonant properties of pacemaker pyloric dilator (PD) neurons in the central pattern generator network through mathematical modeling. From the pharmacological point of view, calcium currents cannot be blocked in PD neurons without removing the calcium-dependent potassium current. Thus, the effects of calcium (I(Ca)) and calcium-dependent potassium (I(KCa)) currents on resonant properties remain unclear. By taking advantage of Hodgkin-Huxley-type model of neuron and its equivalent RLC circuit, we examine the effects of changing resting membrane potential and those ionic currents on the resonance. Results show that changing the resting membrane potential influences the amplitude and frequency of resonance so that the strength of resonance (Q-value) increases by both depolarization and hyperpolarization of the resting membrane potential. Moreover, hyperpolarization-activated inward current (I(h)) and I(Ca) (in association with I(KCa)) are dominant factors on resonant properties at hyperpolarized and depolarized potentials, respectively. Through mathematical analysis, results indicate that I h and I(KCa) affect the resonant properties of PD neurons. However, I(Ca) only has an amplifying effect on the resonance amplitude of these neurons.
    Matched MeSH terms: Calcium/metabolism*; Potassium Channels, Calcium-Activated/metabolism
  5. Norhazrina N, Syazwana N, Aisyah M, Aznani H, Maideen H, M S Nizam
    PhytoKeys, 2019;128:57-72.
    PMID: 31388328 DOI: 10.3897/phytokeys.128.33860
    Gunung Senyum Recreational Forest harbours 59 species, two subspecies and five varieties of mosses in 32 genera and 16 families that had been identified from a total of 589 specimens collected from the area. These figures represent 11.8% out of the 558 taxa, 20.2% out of the 158 genera and 34.7% out of the 46 families of mosses reported for Peninsular Malaysia. The total also represents 14.9% of the 442 taxa, 24.0% of the 133 genera and 40.0% of the 40 families of mosses recorded in Pahang. The largest family of mosses found in this limestone forest is Calymperaceae followed by Fissidentaceae. There are two new records for Pahang, Calymperespallidum Mitt. and Taxitheliumbinsteadii Broth. & Dixon. The analysis of species similarities of mosses found in the study area with some other selected areas showed that Gunung Senyum Recreational Forest had a high percentage of species similarity with Perlis State Park at Wang Kelian, another limestone forest, at 38%. Corticol is the main habitat utilised by mosses in Gunung Senyum Recreational Forest with 47 taxa, followed by the lignicol and calcicol each with 35 and 26 taxa, respectively.
    Matched MeSH terms: Calcium Carbonate
  6. Charles A, Cheng CK
    J Environ Manage, 2019 Mar 15;234:404-411.
    PMID: 30640165 DOI: 10.1016/j.jenvman.2019.01.024
    Palm oil mill effluent (POME) is a serious and expensive environmental problem in Malaysia. In this paper, CaFe2O4 is introduced as a novel photocatalyst for the degradation of POME under visible light irradiation. Two synthesis routes, auto-combustion and co-precipitation, and two calcination temperatures 550 °C and 700 °C were used to produce four CaFe2O4 catalysts AC550, AC700, CP550 and CP700. CP550 exhibited the greatest photocatalytic degradation at 56% chemical-oxygen-demand (COD) removal after 8 h of irradiation which dropped to 49% after three consecutive cycles indicating reasonable conversion and high recyclability. BET analysis indicated CP550 had the highest SBET (27.28 m2/g) and pore volume (0.077 cm3/g) which dropped precipitously for CP700 upon increasing the calcination temperature to an SBET of 9.73 m2/g and pore volume of 0.025 cm3/g due to annealing which created a smoother surface area as evidenced by the SEM images. UV-Vis DRS indicated CP550 had the highest band-gap (1.52 eV) which is likely due to the presence of a highly crystalline pure CaFe2O4 phase compared to the other products which existed as a mixture of Fe oxidation states evidenced by the XRD data. The PL spectra for all catalysts indicated significantly lower recombination rate for both CP550 and CP700. Introduction of IPA into the reaction mixture to eliminate hydroxyl radicals resulted in a diminishing of COD removal from 56% to 7% proving hydroxyl radicals to be the primary reactive species responsible for photodegradation of POME.
    Matched MeSH terms: Calcium Compounds
  7. Kiew R, Lau KH
    PhytoKeys, 2019.
    PMID: 30774505 DOI: 10.3897/phytokeys.117.31560
    The genus Senyumia was previously known from a single species, S.minutiflora (Ridl.) Kiew, A.Weber & B.L.Burtt, from a limestone karst, Gunung Senyum, in Pahang, Malaysia. Senyumiagranitica Kiew, here described and illustrated, is the second species of the genus. It differs from S.minutiflora, not only in its habitat, but also in its shorter leaves, larger, non-resupinate or only partially resupinate flowers and smaller seeds. It is known from a small, fragmented population from a low range of hills. Therefore, under the IUCN Red List Categories & Criteria, it is assessed as Critically Endangered.
    Matched MeSH terms: Calcium Carbonate
  8. Udenni Gunathilake TMS, Ching YC, Ching KY, Chuah CH, Abdullah LC
    Polymers (Basel), 2017 Apr 29;9(5).
    PMID: 30970839 DOI: 10.3390/polym9050160
    Extensive employment of biomaterials in the areas of biomedical and microbiological applications is considered to be of prime importance. As expected, oil based polymer materials were gradually replaced by natural or synthetic biopolymers due to their well-known intrinsic characteristics such as biodegradability, non-toxicity and biocompatibility. Literature on this subject was found to be expanding, especially in the areas of biomedical and microbiological applications. Introduction of porosity into a biomaterial broadens the scope of applications. In addition, increased porosity can have a beneficial effect for the applications which exploit their exceptional ability of loading, retaining and releasing of fluids. Different applications require a unique set of pore characteristics in the biopolymer matrix. Various pore morphologies have different characteristics and contribute different performances to the biopolymer matrix. Fabrication methods for bio-based porous materials more related to the choice of material. By choosing the appropriate combination of fabrication technique and biomaterial employment, one can obtain tunable pore characteristic to fulfill the requirements of desired application. In our previous review, we described the literature related to biopolymers and fabrication techniques of porous materials. This paper we will focus on the biomedical and microbiological applications of bio-based porous materials.
    Matched MeSH terms: Calcium Phosphates
  9. Dahshaini Nadarajan, Sharifah Mastura Syed Mohd Daud, Nadiah Syariani Md Shariff
    MyJurnal
    Introduction: Broken glass exhibits unique fracture patterns depend upon the nature of the impact. The fracture patterns provide information like point and angle of impact, direction of force and sequence of firing. Recent studies have shown that the use of shotgun in Malaysia is increasing, yet, the relationship existing among the fracture pattern and the projectile impact factors are not well documented. The objective was to analyse the fracture characteristics on different glass types of variable thickness and distance made by shotgun ammunition. Methods: Soda lime and tempered glass panel with dimension of 12’x 12’ with 3 or 4 mm thickness were shot from various distances of 4, 6 and 8 m from the muzzle end of the shotgun. Samples were analysed under fixed parameters and observations were recorded. Results: It is found that the bullet hole diameter of 4 mm tempered glass were larger compared to 4 mm soda lime glass ranged from 14.33 to 24.17 cm as distance increased. Tempered glass surface also exhibited dicing fragments unlike soda lime glass where only radial fracture patterns are evident. This can be attributed to high inherent strength and ductility that makes the tempered glass remarkably resistant to external force. Conclusion: The findings from this study can lead to distinguish the type of glass through examination of fracture patterns, whether it is soda lime silica or tempered glass. The type of glass and the source of impact can be determined using the fragments, no reconstruction necessary.
    Matched MeSH terms: Calcium Compounds
  10. Marzuki MEB, Liew TS, Mohd-Azlan J
    Zookeys, 2021;1035:1-113.
    PMID: 33958931 DOI: 10.3897/zookeys.1035.60843
    This study presents a list of land snails and slugs found on limestone hills in the District of Bau, the state of Sarawak in Malaysian Borneo. Systematic and random sampling for land snails was conducted at eight limestone outcrops, namely, Gunung Stulang, Padang Pan, Gunung Kapor, Gunung Lobang Angin, Gunung Doya, Gunung Batu, Bukit Sekunyit and Gunung Sebayat. A total of 122 land snail species was documented with photographs of each species. Of the 122 species collected, 13 are new to science, namely, Acmella bauensissp. nov., Japonia bauensissp. nov., Plectostoma margaretchanaesp. nov., Microcystina arabiisp. nov., Microcystina atonisp. nov., Microcystina pariparisp. nov., Microcystina liratasp. nov., Microcystina oswaldbrakenisp. nov., Microcystina kilatsp. nov., Philalanka jambusanensissp. nov., Everettia microrhytidasp. nov., Everettia minutasp. nov., and Paralaoma sarawakensissp. nov.
    Matched MeSH terms: Calcium Carbonate
  11. Mondal AK, Mohamed MA, Ping LK, Mohamad Taib MF, Samat MH, Mohammad Haniff MAS, et al.
    Materials (Basel), 2021 Jan 28;14(3).
    PMID: 33525586 DOI: 10.3390/ma14030604
    Gallium oxide (Ga2O3) is a promising wide-band-gap semiconductor material for UV optical detectors and high-power transistor applications. The fabrication of p-type Ga2O3 is a key problem that hinders its potential for realistic power applications. In this paper, pure α-Ga2O3 and Ca-doped α-Ga2O3 band structure, the density of states, charge density distribution, and optical properties were determined by a first-principles generalized gradient approximation plane-wave pseudopotential method based on density functional theory. It was found that calcium (Ca) doping decreases the bandgap by introducing deep acceptor energy levels as the intermediate band above the valence band maximum. This intermediate valence band mainly consists of Ca 3p and O 2p orbitals and is adequately high in energy to provide an opportunity for p-type conductivity. Moreover, Ca doping enhances the absorptivity and reflectivity become low in the visible region. Aside, transparency decreases compared to the pure material. The optical properties were studied and clarified by electrons-photons interband transitions along with the complex dielectric function's imaginary function.
    Matched MeSH terms: Calcium, Dietary
  12. Mahajan A, Buse J, Kline G
    Osteoporos Int, 2020 Jan;31(1):203-207.
    PMID: 31641801 DOI: 10.1007/s00198-019-05170-9
    Familial hypocalciuric hypercalcemia (FHH) is a benign autosomal dominant condition characterized by lifelong asymptomatic hypercalcemia. FHH is typically caused by a heterozygous inactivating mutation of the calcium-sensing receptor (CaSR) and characterized by moderate hypercalcemia, inappropriately normal or elevated serum parathyroid hormone (PTH), and relative hypocalciuria (FeCa calcium excretion found to be secondary to a novel pathogenic inactivating mutation of the CaSR gene. We present an asymptomatic 54-year-old Malaysian woman with incidentally discovered hypercalcemia, intermittent hypophosphatemia, and FeCa > 2%. PTH levels were repeatedly below the mean of the reference range (on two separate assays) and sometimes even below the lower reference limit. Two siblings, one niece, and her son had hypercalcemia without nephrolithiasis. Cinacalcet, used as a PTH-suppression test, normalized serum total and ionized calcium after 7 days of cinacalcet 30 mg BID, confirming her hypercalcemia was PTH-mediated. Given her family history, genetic testing was pursued and discovered a novel pathogenic mutation of the CaSR gene confirming the diagnosis of FHH type 1. Our case represents an atypical presentation of FHH1 with low PTH and FeCa > 2%. This contributes to the expanding clinical and biochemical spectrum of CaSR inactivating mutations and presents an innovative approach to evaluating biochemically uncertain familial hypercalcemia with cinacalcet before pursuing expensive genetic analysis.
    Matched MeSH terms: Calcium
  13. Mehdizadeh H, Jia X, Mo KH, Ling TC
    Environ Pollut, 2021 Jul 01;280:116914.
    PMID: 33774540 DOI: 10.1016/j.envpol.2021.116914
    Recently, the use of accelerated carbonation curing has attracted wide attention as a promising method to reduce carbon dioxide (CO2) emission and improve the mechanical properties of cement-based materials. However, the diffusion mechanism of CO2 in the matrix and the content of hydration products are the key factors that restrict the carbonation reaction rate. To understand the combined behavior of hydration and carbonation reactions, this paper investigates the influence of cement hydration induced by water-to-cement ratio (w/c) (ranging from 0.25 to 0.45) on microstructure and microhardness properties of cement paste. The experimental results demonstrated that carbonation only occurred at the surface layer of cement paste samples and carbonation efficiency was significantly influenced by greater hydration due to higher w/c. The carbonation depth of the sample with 0.45 w/c was about 6 times higher than that of sample with 0.25 w/c after 28 days of CO2 curing. XRD results revealed that calcite-type calcium carbonate is the main carbonation product and consumption of clinker phases (C2S and C3S) during the hydration enhanced the calcite precipitation in the pores of the surface layer. According to FTIR, with increasing w/c, the position of Si-O-Si stretching bond of the carbonated surface changed from Q2 to Q3, confirming the formation of amorphous silica-rich gel, along with the appearance of CO32- bonds related to calcite. In overall, the micro-mechanical analysis in this study showed that the carbonation significantly improved the surface microhardness of cement paste samples, while the refinement of capillary pores due to carbonation also decreased the negative impact of large pores formed in the matrix of cement paste prepared with high w/c.
    Matched MeSH terms: Calcium Carbonate
  14. Zhang K, Teng Z, Shao W, Wang Y, Li M, Lam SS
    J Hazard Mater, 2020 10 05;397:122754.
    PMID: 32361140 DOI: 10.1016/j.jhazmat.2020.122754
    Phosphate solubilizing bacteria (PSBs) shows high potential to be used for lead passivation in sediments due to the abilities of releasing phosphate and the subsequent formation of insoluble Pb-phosphate compounds. In this research, microbial capsules implemented with sodium alginate and CaCl2, containing Leclercia adecarboxylata L15 (a lead resistant PSB) and Ca3(PO4)2, were developed and the performance on lead passivation under different conditions was examined. The optimal concentrations of sodium alginate and CaCl2 for formulating the capsules were determined to be 0.3% and 10%, respectively. The removal efficiency of Pb2+ by capsules containing L15 and Ca3(PO4)2 was up to 98% with a capsule dosage of 2%, initial Pb2+ concentration of 1mM and pH of 3.0, which was better than that of free L15 (18%) and capsules containing only L15 (34%). Lead was immobilized via the formation of Pb5(PO4)3Cl on the surface and Pb3(PO4)2 in the interior of the capsules. The simulated sediment remediation experiments showed that the acid soluble fraction of lead reduced from 28% to 14% and transformed into more stable fractions after 10 days. The experiment results indicated that PSBs capsules coupled with phosphate materials have a great promise for application in remediation of lead contaminated sediments.
    Matched MeSH terms: Calcium Phosphates
  15. Mansor MS, Sah SA
    Trop Life Sci Res, 2012 May;23(1):1-14.
    PMID: 24575221 MyJurnal
    Bird surveys were conducted in the Bukit Kepala Gajah limestone area in Lenggong, Perak from July 2010 to January 2011. The study area was divided into three zones: forest edge, forest intermediate and forest interior. A point-count distance sampling method was used in the bird surveys. The study recorded 7789 detections, representing 100 bird species belonging to 28 families. Pycnonotidae, Timaliidae and Nectariniidae were the dominant families overall and showed the highest number of observations recorded in the study area whereas Motacillidae showed the fewest observations. The bird species were grouped into three feeding guilds: insectivores, frugivores and others (omnivores, carnivores, nectarivores and granivores). The species richness of insectivorous birds differed significantly among the forest zones sampled (Kruskal-Wallis: α=0.05, H=10.979, d.f.=2, p=0.004), with more insectivorous birds occurring in the forest interior. No significant differences were found among the zones in the species richness of either the frugivore guild or the composite others guild.
    Matched MeSH terms: Calcium Carbonate
  16. Mansor MS, Sah SA, Koon LC, Rahman MA
    Trop Life Sci Res, 2011 Dec;22(2):65-80.
    PMID: 24575218 MyJurnal
    Bird surveys were conducted in the Padawan Limestone Area for seven days at each of two study sites, Giam and Danu, from August to December 2008. The purpose of the study was to compare the area's bird species richness and abundance of bird species in other limestone areas and in other forest types. The study also compared the species richness and relative abundance of birds in undisturbed and disturbed areas at both study sites. Twenty mist nets were deployed for 12 hours daily. During this study period, direct observations of birds were also made. In all, 80 species from 34 families were recorded at both sites. At Giam, 120 birds were mist-netted. These birds represented 31 species from 16 families. The direct observations at Giam recorded 13 species from 11 families. In the undisturbed area, 21 species from 13 families were mist-netted, whereas in the disturbed area, 21 species from 10 families were mist-netted. In Danu, a total of 48 birds, representing 25 species from 12 families, were mist-netted. The observations at Danu recorded 34 species from 19 families. Twelve species from 7 families were mist-netted in the undisturbed area, whereas 18 species from 11 families were mist-netted in the disturbed area. Statistical analysis showed that the species diversity index differed significantly between undisturbed and disturbed areas.
    Matched MeSH terms: Calcium Carbonate
  17. Cik Rohaida, C.H., Idris, B., Rusnah, M., Mohd Reusmaazran, Y., Narimah, A.B.
    MyJurnal
    Phase composition of calcium phosphate ceramic is a characteristic directly related to the biological response of implants due to the differences in mechanical and biochemical properties of these compounds. The biodegradation rate of biphasic calcium phosphate (BCP) can be controlled by altering the HA to β-TCP ratios. In this study the crystalline phase evolution of BCP synthesized via precipitation from aqueous solution of (NH4)2PO4 titrated into heated solution of Ca (NO3)2 was evaluated. The resulting powder was fabricated into porous scaffold using polyurethane foam method. Bulk powders were sintered from 700 - 1400°C to determine the most significant sintering temperature to obtain a stable and well crystallize BCP phases. The porous scaffolds were then sintered at selected temperature and the effects of various sintering times from 5,7,9,11,13 and 15 h were investigated. Bulk powders were characterized by dilatometer, IR analysis and XRD and porous scaffolds were analyzed by XRD and SEMEdx. RIR method was performed to show that the HA to β-TCP ratios were increased with increasing of sintering time and reached the maximum HA value at 11h. It is found that, the possibilities to manipulate the HA to β-TCP ratios in BCP porous scaffold by just controlling the sintering time of the scaffold without controlling the starting powder characteristics.
    Matched MeSH terms: Calcium Phosphates
  18. Ghazaleh Shimi, Hasnah Haron
    MyJurnal
    The advantage of cooking cannot be summarized just as the better food digestion. Some investigations showed the effect of cooking on reduction of food anti-nutrients such as oxalate. This study was aimed to determine the effect of cooking on oxalate content and its negative effects on calcium availability in eight Malaysian soy-based dishes. Since there is few data which examined the effects of cooking on food oxalate content globally, thus this study was designed as the first in Malaysia. Oxalate in this research was analyzed by using enzymatic methods, while calcium content was determined by using Atomic Absorption Spectrophotometer. The oxalate concentration was in the range of 6.43-19.40 mg/100 g for whole cooked samples, 9.03-11.90 mg/100 g for raw soy products, and 4.36-7.99 mg/100 g for cooked ones. There were 5 out of 12 samples containing oxalate, which was significantly lower (p < 0.05) in cooked products compared to the raw ones. The rest of the samples were also lower in oxalate but not significantly different (p > 0.05). Oxalate in raw/cooked fermented soy products (tempeh) was slightly lower compared to the non-fermented ones. However, there was no significant difference (p > 0.05) in oxalate amount between fermented and non-fermented soy products. As Oxalate/Calcium ratio was below 1, oxalate did not have an effect on availability of calcium in the studied samples. Optimal cooking and food processing might be effective in reducing oxalate content in soy products. There is a need for more investigations about the effect of cooking on soy products to confirm the present results.
    Matched MeSH terms: Calcium Oxalate
  19. Teng, Sang-Chong, Esah Bahaman, Tang, Wen-Yen
    MyJurnal
    Although only 6.3% of the 221 respondents in this crass-sectional study stated outright that the hospital food served to them was not good, a high proportion of respondents ( 62.0%) supplemented ltaspimlfoad with outside food. When the reasons for supplementation were considered, it is likely that 53.8% ( $5.5%; 95% CI ) of the patients in this study were dissatisfied with hospimlfoudfar some reasons or when particularly with regards t0 variety, attractiveness and sewing lime. The pl‘0]701’l‘i011 of respondents wha were dissatisfied with hospital faud was significantly higher (p
    Matched MeSH terms: Calcium Compounds
  20. Mohd Nazry Salleh, Farizul Hafiz Kasim, Khairul Nizar Ismail, Che Mohd Ruzaidi Ghazali, Kamarudin Hussin, Saiful Azhar Saad, et al.
    MyJurnal
    Batu Reput’ is primary sediment mineral and abundantly found in Perlis. Perlis is one of the major producers of ‘Batu Reput’ in Malaysia that content large deposit of high-purity dolomite [CaMg (CO3)2]. Pure samples of ‘Batu Reput’ recently explored in the Koperasi Rimba Mas Padang Besar Quarry were investigated for their physical, chemical and mineralogical composition. SEM and XRD analysis methods were applied. The potential of ‘Batu Reput’ as a raw material in fertilizer production was investigated in this paper.
    Matched MeSH terms: Calcium Carbonate
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links