MyMedR

Displaying publications 61 - 80 of 137 in total

Abstract:

Sort:

Fulltext Occurrence of Norovirus GI in green and red onion

Noor Hidayah, M.S., Tuan Zainazor, C., Pui, C.F., Noorlis, A., Noor Eliza, M.R., Naziehah, M.D., et al.

International Food Research Journal, 2011;18(2):677-681.
MyJurnal

Several Norovirus cases due to consumption of green onions have been reported during recent years but reports on red onions are not found. Onions are one of the major tastes in Malaysian food which are sometimes consuming raw especially the green onion. Viral contamination in onions can occur due to planting condition and not properly prepared food. This situation can pose the human health risk. A method was developed to detect the Norovirus that might present on different type of onions. In this study, 60 samples were collected from local market. Elution by Tryptose Phosphate Glycine broth and concentration steps using negatively charge filter were applied to enhance the detection of virus in food due to low copies of virus on food surface. The viral RNA was extracted using Qiagen Rneasy Mini kit before further detection using One-step RT-PCR. The total incidence of Norovirus in green onion and red onion was 13.33% (4/30) and 3.33 % (1/30) respectively. This is the first report of the detection of Norovirus in red and green onions in Malaysia. Based on the results, it is concluded that this method is reliable to detect Norovirus on onions and vegetables surface and hence can be applied in the laboratories for routine or food borne outbreak investigation.

Matched MeSH terms: Organic Chemicals
Fulltext Industry and cosmetic uses of talc with their implication on health

Sinniah, Davendralingam

International e-Journal of Science, Medicine & Education, 2011;5(1):10-16.
MyJurnal

Talc’s softness, whiteness, lamellarity, inertness and affinity for organic chemicals make it valuable for industrial and domestic applications. The largest consumers are the paper and ceramic industry; only 5% is used as cosmetics. It is also used for preserving animal feed, and a carrier for drugs, insecticides, pesticides and chemicals. Talc was introduced as baby powder in 1894 and advertised aggressively worldwide. Widespread and indiscriminate use soon raised concerns about its implications for health. The IARC found that talc containing asbestiform fibres is carcinogenic to humans, but inadequate evidence to implicate talc not-containing asbestiform fibres. Pulmonary manifestations of talc inhalation include talcosis, talcosilicosis, and talcoasbestosis. Drug-users administering talc-adulterated oral medications intravenously develop pulmonary granulomas, fibrosis and irreversible pulmonary hypertension. Worldwide reports reveal talc inhalation is fatal to infants; it coats and dries mucus membranes, causes hemorrhage, edema, desquamation of bronchial epithelium, and clogs and compromises mucociliary clearance; larger quantities completely obstruct airways. Progressive diffuse pulmonary fibrosis is a recognized sequel to massive aspiration of baby powder. IARC has classified perineal use of talcum powder as a possible ovarian carcinogen, while a recent study has found that perineal talcum powder increases the risk of endometrial cancer among postmenopausal women. There is a need to raise public awareness of the serious risks associated with the use of talcum powder and for legislation to protect the health of the uninformed who represent the poorer segment of the community, and infants and young children. The dangers associated with cosmetic use of talc outweigh any possible benefits.

Matched MeSH terms: Organic Chemicals
Fulltext The Role of Green Building Materials in Reducing Environmental and Human Health Impacts

Khoshnava SM, Rostami R, Mohamad Zin R, Štreimikienė D, Mardani A, Ismail M

Int J Environ Res Public Health, 2020 04 10;17(7).
PMID: 32290074 DOI: 10.3390/ijerph17072589

Conventional building materials (CBMs) made from non-renewable resources are the main source of indoor air contaminants, whose impact can extend from indoors to outdoors. Given their sustainable development (SD) prospect, green building materials (GBMs) with non-toxic, natural, and organic compounds have the potential to reduce their overall impacts on environmental and human health. In this regard, biocomposites as GBMs are environmentally friendly, safe, and recyclable materials and their replacement of CBMs reduces environmental impacts and human health concerns. This study aims to develop a model of fully hybrid bio-based biocomposite as non-structural GBMs and compare it with fully petroleum-based composite in terms of volatile organic compound (VOC) emissions and human health impacts. Using a small chamber test (American Society for Testing and Materials (ASTM)-D5116) for VOC investigation and SimaPro software modeling with the ReCiPe method for evaluating human health impacts. Life cycle assessment (LCA) methodology is used, and the results indicate that switching the fully hybrid bio-based biocomposite with the fully petroleum-based composite could reduce more than 50% impacts on human health in terms of indoor and outdoor. Our results indicate that the usage of biocomposite as GBMs can be an environmentally friendly solution for reducing the total indoor and outdoor impacts on human health.

Matched MeSH terms: Organic Chemicals
Fulltext Role of α-helical structure in organic solvent-activated homodimer of elastase strain K

Rahman RN, Salleh AB, Basri M, Wong CF

Int J Mol Sci, 2011;12(9):5797-814.
PMID: 22016627 DOI: 10.3390/ijms12095797

Recombinant elastase strain K overexpressed from E. coli KRX/pCon2(3) was purified to homogeneity by a combination of hydrophobic interaction chromatography and ion exchange chromatography, with a final yield of 48% and a 25-fold increase in specific activity. The purified protein had exhibited a first ever reported homodimer size of 65 kDa by SDS-PAGE and MALDI-TOF, a size which is totally distinct from that of typically reported 33 kDa monomer from P. aeruginosa. The organic solvent stability experiment had demonstrated a stability pattern which completely opposed the rules laid out in previous reports in which activity stability and enhancement were observed in hydrophilic organic solvents such as DMSO, methanol, ethanol and 1-propanol. The high stability and enhancement of the enzyme in hydrophilic solvents were explained from the view of alteration in secondary structures. Elastinolytic activation and stability were observed in 25 and 50% of methanol, respectively, despite slight reduction in α-helical structure caused upon the addition of the solvent. Further characterization experiments had postulated great stability and enhancement of elastase strain K in broad range of temperatures, pHs, metal ions, surfactants, denaturing agents and substrate specificity, indicating its potential application in detergent formulation.

Matched MeSH terms: Organic Chemicals/chemistry*
Fulltext The preparation and evaluation of self-nanoemulsifying systems containing Swietenia oil and an examination of its anti-inflammatory effects

Eid AM, El-Enshasy HA, Aziz R, Elmarzugi NA

Int J Nanomedicine, 2014;9:4685-95.
PMID: 25336948 DOI: 10.2147/IJN.S66180

There is an increasing trend among pharmaceutical industries to use natural bioactive materials as medicinal agents and to use new technologies such as self-nanoemulsifying systems. The solubility and bioavailability of poorly soluble drugs can be enhanced by self-nanoemulsifying systems. Swietenia oil is frequently used because of its antimicrobial, antimutagenic, and anticancer bioactive medical properties. This study was conducted to develop self-nanoemulsifying systems for Swietenia oil that will enhance the anti-inflammatory activity of the oil. The self-emulsifying systems developed for Swietenia oil in this study were constructed using ternary phase diagrams and contained the nonionic surfactants Labrasol(®), Tween 20, Capmul(®), and Labrafil(®). The effect of these surfactants on the formulation was examined. The mean droplet size of Swietenia oil as well as their distribution, appearance, viscosity, and spreading times were studied to find the optimum formula, which contained droplets that were less than 200 nm. The next step was to test the anti-inflammatory properties of the optimum formula using a carrageenan-induced rat paw edema test. The results from this test were compared to the oil solution. Different oil/surfactants mixtures had various emulsification properties that were related to the size of their droplets. Tween 20 is a good surfactant to use in self-emulsifying systems because it produces droplets of nano-size. Mixtures of Capmul/Labrasol at a ratio of 2:1 and Labrafil/Tween 20 at a ratio of 1:2 were able to produce self-nanoemulsifying formulations containing Swietenia oil concentrations that ranged from 20%-50%. Nanoemulsion occurred when the size of the droplets fell below 200 nm with low size distribution (<0.3) after being gently mixed with water. It was found that the hydrophilic/lipophilic balance value affected the ternary phase diagram behavior of Swietenia oil and surfactants. In addition, the anti-inflammatory properties of Swietenia oil were greater in the self-nanoemulsifying systems than in the oil solution.

Matched MeSH terms: Organic Chemicals/chemistry
Influence of lipolysis and droplet size on tocotrienol absorption from self-emulsifying formulations

Yap SP, Yuen KH

Int J Pharm, 2004 Aug 20;281(1-2):67-78.
PMID: 15288344

A single dose comparative bioavailability study was conducted to evaluate the bioavailability of tocotrienols from two self-emulsifying formulations, one of which produced an emulsion that readily lipolysed under in vitro condition (SES-A), while the other produced a finer dispersion with negligible lipolysis (SES-B) in comparison with that of a non-self-emulsifying formulation in soya oil. The study was conducted according to a three-way crossover design using six healthy human volunteers. Statistically significant differences were observed between the logarithmic transformed peak plasma concentration (Cmax) and total area under the plasma concentration-time curve (AUC(0-infinity)) values of both SES-A and -B compared to NSES-C indicating that SES-A and -B achieved a higher extent of absorption compared to NSES-C. Moreover, the 90% confidence interval of the AUC(0-infinity) values of both SES-A and -B over those of NSES-C were between 2-3 suggesting an increase in bioavailability of about two-three times compared to NSES-C. Both SES-A and -B also achieved a faster onset of absorption. However, both SES-A and -B had comparable bioavailability, despite the fact that SES-B was able to form emulsions with smaller droplet size. Thus, it appeared that both droplet sizes as well as the rate and extent of lipolysis of the emulsion products formed were important for enhancing the bioavailability of the tocotrienols from the self-emulsifying systems.

Matched MeSH terms: Organic Chemicals
Comparison of signal-to-noise, blank determination, and linear regression methods for the estimation of detection and quantification limits for volatile organic compounds by gas chromatography

Sanagi MM, Ling SL, Nasir Z, Hermawan D, Ibrahim WA, Abu Naim A

J AOAC Int, 2010 2 20;92(6):1833-8.
PMID: 20166602

LOD and LOQ are two important performance characteristics in method validation. This work compares three methods based on the International Conference on Harmonization and EURACHEM guidelines, namely, signal-to-noise, blank determination, and linear regression, to estimate the LOD and LOQ for volatile organic compounds (VOCs) by experimental methodology using GC. Five VOCs, toluene, ethylbenzene, isopropylbenzene, n-propylbenzene, and styrene, were chosen for the experimental study. The results indicated that the estimated LODs and LOQs were not equivalent and could vary by a factor of 5 to 6 for the different methods. It is, therefore, essential to have a clearly described procedure for estimating the LOD and LOQ during method validation to allow interlaboratory comparisons.

Matched MeSH terms: Organic Chemicals/analysis*
Fulltext CHARACTERISTIC OF PRASEODYMIUM OXIDE DOPED MANGANESE/RUTHENIUM CATALYST IN METHANATION: EFFECT CALCINATION TEMPERATURE

Salmiah Jamal Mat Rosid, Susilawati Toemen, Wan Azelee Wan Abu Bakar, Sarina Mat Rosid, Wan Nazwanie Wan Abdullah, Siti Maisarah Aziz

Journal of Academia Universiti Teknologi MARA Negeri Sembilan, 2021;9(1):49-55.
MyJurnal

Lanthanide element in the methanation reaction gives an excellent catalytic performance at low reaction temperature. Praseodymium is one of lanthanide element and was chosen due to its properties which are thermally stable and provide excess of oxygen in the oxide lattice. Therefore, a catalyst of Ru/Mn/Pr (5:30:65)/Al2O3 (RMP, 5:30:65/Al2O3) was prepared via wetness impregnation method and the effect of calcination temperature on the catalyst performance was investigated using FTIR analysis. The RMP/Al2O3 catalyst calcined at 800 o C was chosen as an excel catalyst with CO2 conversion of 96.9% and CH4 formation of 45.1% at 350 o C reaction temperature. From the EDX mapping, it can be observed that the distribution of all element is homogeneous at 800 o C and 900 o C except Ru, O and Al at 1000 o C calcination temperature. The image from FESEM also shows the presence of some crystal shape on the catalyst surface. From the FTIR analysis, the peak stretching and bending mode of O-H bond decreased when the calcination temperature increased.

Matched MeSH terms: Organic Chemicals
Fulltext XRF determination of major elemental contents of clay samples from north-west Peninsular Malaysia

Ahmad Saat, Zaini Hamzah, Zaharidah Abu Bakar

Journal of Nuclear and Related Technologies, 2009;2009(1):230-236.
MyJurnal

Being an imperative material for man either used as building materials, pottery or as components in material industry and technology, knowledge of clays elemental contents is important. In the present study ten clay samples obtained from various locations in North-West Peninsular Malaysia were used. Majority of the clays were economically manufactured to be used as building materials or pottery. The objective of study was to determine the main elemental contents of the samples, and relate the results to the types of minerals, as well as to compare them with clays from other studies. In the study X-ray Fluorescence (XRF) coupled to samples dilution method and standard calibration samples was used. The elements detected in the study were Si, Al, Fe, Ti, K and Ca. Depending on locations, the percentage concentration ranged between 24.8 – 32.4 for Si, 10.8 – 19.0 for Al, 0.09 – 2.12 for Fe, 0.08 – 1.13 for Ti, 0.45 – 3.39 for K and trace amount of Ca and P. However, Mg that normally found in typical clay was not found in the studied samples. Comparing the oxide of the major elements with other studies, it was found that the clay samples contained mixtures of kaolinite (two-layered structure) and illite (three-layered structure).

Matched MeSH terms: Organic Chemicals
Fulltext Characterization of zirconium sulfate supported on mesoporous molecular sieve HMS catalyst using XRD, XRF and XPS techniques

Joon, Ching Juana, Mohd Ambar Yarmob, Zhangc, Jingchang

Journal of Nuclear and Related Technologies, 2009;2009(1):297-305.
MyJurnal

New solid acid catalyst consisting of zirconium sulfate (ZS) supported on a pure-HMS hexagonal mesoporous material (HMS) have been prepared and characterized. This heterogeneous catalyst is able to make a contribution to the field of acid catalyst involving bulky organic molecules. XRD analysis shows that ZS is intact after impregnated on HMS surface and formed finely dispersed species. No ZS crystal phase was developed even at ZS loadings as high as 40 wt %. The occurrence of chemical interaction between ZS and HMS was observed by XPS analysis. Further, XRF results demonstrated that there is no leaching of ZS elements after impregnation. This study shows that ZS can be impregnated on HMS and would be a promising solid acid catalyst for acid-type reactions espcially invovling bulky organic molecuels.

Matched MeSH terms: Organic Chemicals
Fulltext Transformation of intermetallic layer due to oxidation heat treatment on hot-dipped aluminum coated steel

Hishamuddin Husain, Abdul Razak Daud, Muhamad Daud, Nadira Kamarudin

Journal of Nuclear and Related Technologies, 2013;2013(2):65-69.
MyJurnal

Heat treatment was introduced onto the aluminum coated low carbon steel to promote the formation of thin layer of oxide for enhancement of oxidation protection of steel. This process has transformed the existing intermetallic layer formed during hot dip aluminizing process. Experiment was conducted on the low carbon steel substrates with 10mm x 10mm x 2mm dimension. Hot dip aluminizing of low carbon steel was carried out at 750 ºC dipping temperature in a molten pure aluminum for 5 minutes. Aluminized samples were heat treated at 600 ºC, 700 ºC, 800 ºC, and 900 ºC for 1 hour. X-ray Diffraction (XRD), Scanning Electron Microscope (SEM) and EDAX were used in investigation. From the observation, it showed the intermetallic thickness increased with the increase in temperature. The result of EDAX analysis revealed the existence of oxide phase and the intermetallics. The XRD identified the intermetallics as Fe2Al5 and FeAl3.

Matched MeSH terms: Organic Chemicals
Neuropathy due to organic solvent exposure: three cases reported from Pahang, Malaysia

Agus Salim M.B., Malina, O., Hisanaga, N., Hirata M , Zainul Abidin

Journal of Occupational Safety and Health, 2004;1(1):39-42.
MyJurnal

Exposure to organic solvent during work activities has been known to be associated with significant clinical conditions such as peripheral neuropathy and neurobehavioral changes. Three reported cases of peripheral neuropathy most likely due to exposure to chronic organic solvent were reported recently in Bentong Malaysia. These cases showed a compatible clinical history, occupational history, examination and neurological study that link with peripheral neuropathy due to organic solvent poisoning. Proper education and training with review of engineering control measures are among preventive and corrective measures recommended. More comprehensive study in order to establish significant causal-effect relationship as documented evidence is recommended.

Matched MeSH terms: Organic Chemicals
Assessment of dispersive liquid-liquid microextraction conditions for gas chromatography time-of-flight mass spectrometry identification of organic compounds in honey

Moniruzzaman M, Rodríguez I, Rodríguez-Cabo T, Cela R, Sulaiman SA, Gan SH

J Chromatogr A, 2014 Nov 14;1368:26-36.
PMID: 25441341 DOI: 10.1016/j.chroma.2014.09.057

The suitability of the dispersive liquid-liquid microextraction (DLLME) technique for gas chromatography (GC) characterization of minor organic compounds in honey samples is evaluated. Under optimized conditions, samples were pre-treated by liquid-liquid extraction with acetonitrile followed by DLLME using carbon tetrachloride (CCl4, 0.075 mL) as extractant. The yielded settled phase was analyzed by GC using high resolution time-of-flight (TOF) mass spectrometry (MS). The whole sample preparation process is completed in approximately 10 min, with a total consumption of organic solvents below 4 mL, relative standard deviations lower than 12% and with more than 70 organic compounds, displaying linear retention index in the range from 990 to 2900, identified in the obtained extracts. In comparison with HS SPME extraction, higher peak intensities were attained for most volatile and semi-volatile compounds amenable to both extraction techniques. Furthermore, other species such as highly polar and water soluble benzene acids, long chain fatty acids, esters and flavonoids, which are difficult to concentrate by HS SPME, could be identified in DLLME extracts. Some of the compounds identified in DLLME extracts have been proposed as useful for samples classification and/or they are recognized as markers of honeys from certain geographic areas.

Matched MeSH terms: Organic Chemicals/analysis*
Comfort and frictional properties of dental gloves

Roberts AD, Brackley CA

J Dent, 1996 Sep;24(5):339-43.
PMID: 8916648

OBJECTIVES: A survey of general dental practitioners and dental surgery assistants was carried out to ascertain their preferences and opinions on powder-free hydrogel-coated gloves compared with starch-powdered gloves. The aim was to relate the survey findings to laboratory measurements of the frictional characteristics of glove inner surfaces and their water absorptive capability.
METHODS: The survey was carried out using a questionnaire given to local dental practitioners. Glove friction and water absorption measurements were made using specially designed equipment.
RESULTS: The survey showed that a selected group of dentist and dental surgery assistants preferred hydrogel-coated gloves, particularly for damp donning, durability and long-term wear comfort. Laboratory measurements showed that the hydrogel coating gave a low friction coefficient against damp skin. The coating was durable, and absorbed water more readily than other treatments.
CONCLUSION: A survey of dental practitioners and dental surgery assistants and laboratory measurements indicates that hydrogel-coated gloves have superior properties, and are preferred to other non-sterile glove types.

Matched MeSH terms: Organic Chemicals
Geographical distribution of persistent organic pollutants in the environment: A review

Batool S, Rashid SA, Moah MJ, Sarfraz M, Ashraf MA

J Environ Biol, 2016 09;37(5 Spec No):1125-1134.
PMID: 29989744

The sources, distribution, transformation, toxicity and accumulation of persistent organic pollutants (POPs) in aquatic and terrestrial ecosystems have attracted global concern and attention over the last several decades. Although, POPs are toxic, degrade slowly and have a tendency to accumulate in the food chain, they are still widely used worldwide in many fields, such as industrial and agricultural activities. In addition, discharge of POPs into waterways may lead to serious health-related and environmental problems. This review provides an overview of the continental distributions of many types of POPs and the health risks associated with the exposure to POPs in daily life. This review also discusses the distribution of POPs in Malaysia, and the future work that will be conducted in the Klang River, one of the basins subjected to pollution due to development and urbanization.

Matched MeSH terms: Organic Chemicals/chemistry*
Co-composting of acid waste bentonites and their effects on soil properties and crop biomass

Soda W, Noble AD, Suzuki S, Simmons R, Sindhusen LA, Bhuthorndharaj S

J Environ Qual, 2006 Oct 27;35(6):2293-301.
PMID: 17071900

Acid waste bentonite is a byproduct from vegetable oil bleaching that is acidic (pH < 3.0) and hydrophobic. These materials are currently disposed of in landfills and could potentially have a negative impact on the effective function of microbes that are intolerant of acidic conditions. A study was undertaken using three different sources of acid waste bentonites, namely soybean oil bentonite (SB), palm oil bentonite (PB), and rice bran oil bentonite (RB). These materials were co-composted with rice husk, rice husk ash, and chicken litter to eliminate their acid reactivity and hydrophobic nature. The organic carbon (OC) content, pH, exchangeable cations, and cation exchange capacity (CEC) of the acid-activated bentonites increased significantly after the co-composting phase. In addition, the hydrophobic nature of these materials as measured using the water drop penetration time (WDPT) decreased from >10 800 s to 16 to 80 s after composting. Furthermore, these composted materials showed positive impacts on soil physical attributes including specific surface area, bulk density, and available water content for crop growth. Highly significant increases in maize biomass (Zea mays L.) production over two consecutive cropping cycles was observed in treatments receiving co-composted bentonite. The study clearly demonstrates the potential for converting an environmentally hazardous material into a high-quality soil conditioner using readily available agricultural byproducts. It is envisaged that the application of these composted acid waste bentonites to degraded soils will increase productivity and on-farm income, thus contributing toward food security and poverty alleviation.

Matched MeSH terms: Organic Chemicals/metabolism; Organic Chemicals/chemistry
Effect of agitation and aeration on bioconversion of domestic wastewater sludge in a batch fermenter

Alam MZ, Fakhru'l-Razi A

J Environ Sci Health A Tox Hazard Subst Environ Eng, 2002;37(6):1087-97.
PMID: 12090282

Effects of agitation and aeration rate on microbial treatment of domestic wastewater sludge were investigated in a batch fermenter using mixed culture of Penicillium corylophilum and Aspergillus niger. It was found that liquid state bioconversion (LSB) of wastewater sludge was highly influenced by the effects of agitation and aeration. The maximum production of sludge cake and reduction of organic substances in treated sludge were recorded at 150-200 rpm of agitation speed and 0.5 vvm of aeration rate after 72 h of treatment. No effective results were observed at higher rate of agitation (300 rpm) and aeration (1.5 vvm) as compared to optimum values. The results showed that the minimum level of air saturation (pO2) was adequate to maintain the bioconversion process.

Matched MeSH terms: Organic Chemicals/metabolism
Adsorption, desorption, and mobility of permethrin in Malaysian soils

Ismail BS, Kalithasan K

J Environ Sci Health B, 2004 May;39(3):419-29.
PMID: 15186031

The adsorption, desorption, and mobility of permethrin in six tropical soils was determined under laboratory and greenhouse conditions. The six soils were selected from vegetable growing areas in Malaysia. Soil organic matter (OM) was positively correlated (r2 = 0.97) with the adsorption of permethrin. The two soils, namely, Teringkap 1 and Lating series with the highest OM (3.2 and 2.9%) released 32.5 and 30.8% of the adsorbed permethrin after four consecutive repetitions of the desorption process, respectively, compared to approximately 75.4% of the Gunung Berinchang soil with the lowest OM (1.0%) under the same conditions. The mobility of permethrin down the soil column was inversely correlated to the organic matter content of the soil. Permethrin residue penetrated only to the 10-15 cm zone in the Teringkap 1 soil with 3.2% OM but penetrated to a depth of more than 20 cm in the other soils. The Berinchang series soil with the lowest OM (1.0%) yielded leachate with 14.8% permethrin, the highest level in leachates from all the soils tested. Therefore, the possibility for permethrin to contaminate underground water may be greater in the presence of low organic matter content, which subsequently allows a higher percentage of permethrin to move downwards through the soil column.

Matched MeSH terms: Organic Chemicals
Statistical optimization of process parameters for landfill leachate treatment using electro-Fenton technique

Mohajeri S, Aziz HA, Isa MH, Zahed MA, Adlan MN

J Hazard Mater, 2010 Apr 15;176(1-3):749-58.
PMID: 20022166 DOI: 10.1016/j.jhazmat.2009.11.099

Mature landfill leachate is typically non-biodegradable and contains high concentration of refractory organics. The aim of this research was to optimize operating parameters in electro-Fenton process, for the removal of recalcitrant organics from semi-aerobic landfill leachate using response surface methodology (RSM). Effectiveness of important process parameters H(2)O(2)/Fe(2+) molar ratio, current density, pH and reaction time were determined, optimized and modeled successfully. Significant quadratic polynomial models were obtained (R(2)=0.9972 and 0.9984 for COD and color removals, respectively). Numerical optimization based on desirability function were employed; in a 43 min trial 94.07% of COD and 95.83% of color were removed at pH 3 and H(2)O(2)/Fe(2+) molar ratio 1, while current density was 49 mA/cm(2). The results indicate that E-Fenton process was an effective technology for semi-aerobic landfill leachate treatment.

Matched MeSH terms: Organic Chemicals
Individual and combined effects of organic, toxic, and hydraulic shocks on sequencing batch reactor in treating petroleum refinery wastewater

Mizzouri NSh, Shaaban MG

J Hazard Mater, 2013 Apr 15;250-251:333-44.
PMID: 23474407 DOI: 10.1016/j.jhazmat.2013.01.082

This study analyzes the effects of toxic, hydraulic, and organic shocks on the performance of a lab-scale sequencing batch reactor (SBR) with a capacity of 5L. Petroleum refinery wastewater (PRWW) was treated with an organic loading rate (OLR) of approximately 0.3 kg chemical oxygen demand (COD)/kg MLSSd at 12.8h hydraulic retention time (HRT). A considerable variation in the COD was observed for organic, toxic, hydraulic, and combined shocks, and the worst values observed were 68.9, 77.1, 70.2, and 57.8%, respectively. Improved control of toxic shock loads of 10 and 20mg/L of chromium (VI) was identified. The system was adversely affected by the organic shock when a shock load thrice the normal value was used, and this behavior was repeated when the hydraulic shock was 4.8h HRT. The empirical recovery period was greater than the theoretical period because of the inhibitory effects of phenols, sulfides, high oil, and grease in the PRWW. The system recovery rates from the shocks were in the following order: toxic, organic, hydraulic, and combined shocks. System failure occurred when the combined shocks of organic and hydraulic were applied. The system was resumed by replacing the PRWW with glucose, and the OLR was reduced to half its initial value.

Matched MeSH terms: Organic Chemicals

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links