Displaying publications 61 - 80 of 92 in total

Abstract:
Sort:
  1. Fulltext Effect of delayed light-cured activation on bond-strengths between composites and adhesives
    Masudi, S.M., Padtong, E.A.
    Archives of Orofacial Sciences, 2006;1(1):36-41.
    MyJurnal
    The objective of this study was to evaluate and compare the effect of times elapsed on the application of a single-step adhesive system and activation of light cured subsequently placed composite to the bond strength between composites and adhesives. This was an experimental study using fifteen teeth extracted human premolars, which were caries and pathology free. Sample of teeth were embedded up to cemento-enamel junction on box of acrylic resin. All teeth were cut to obtain flat occlusal dentin surfaces. The specimens were randomly selected and divided into three groups with five teeth each. All the teeth were assigned to single-step bonding system AQ Bond (Sun Medical Co. Ltd., Shiga, Japan) according to manufacturer’s direction. Group 1 was left for 45 seconds, group 2 for 2 minutes, while group 3 was 5 minutes before putting subsequently restorative material. Composite resin was applied in 3 mm diameter and 6 mm height of cylinder mold and cured according to manufacturer’s direction on the dentin surface. Shear bond strength were measured using a testing system (Instron 8874, Instron Corp., Canton, MA, USA) at a crosshead speed of 2 mm/min with cell load capacity of 25 KN. The bond-strengths between single step adhesive system (AQ Bond) and light cured composites were tested. Mann-Whitney test showed no significant differences in bond-strength between Group 1 and Group 2. However, there were significantly differences (p
    Matched MeSH terms: Adhesives
  2. Fulltext "Ormocer an innovative technology": A replacement for conventional cements and veneer? A comparative in vitro analysis
    Rajeev V, Arunachalam R, Nayar S, Arunima PR, Ganapathy S, Vedam V
    Eur J Dent, 2017 4 25;11(1):58-63.
    PMID: 28435367 DOI: 10.4103/ejd.ejd_113_16
    OBJECTIVE: This in vitro study was designed to assess shear bond strength (SBS) of ormocer flowable (OF) resin as a luting agent, ormocer as an indirect veneer material with portrayal of modes of failures using scanning electron microscope (SEM).

    MATERIALS AND METHODS: Sixty maxillary central incisors were divided into Group I, II, and III with 20 samples each based on luting cement used. They were OF, self-adhesive (SA) cement, and total etch (TE) cement. These groups were subdivided into "a" and "b" of ten each based on the type of veneering materials used. Veneer discs were fabricated using Ormocer restorative (O) and pressable ceramic (C). Specimens were thermocycled and loaded under universal testing machine for SBS. The statistical analysis was done using one-way ANOVA post hoc Tukey honest significant difference method.

    RESULTS: A significant difference was observed between the Groups I and II (P < 0.05). The highest mean bond strength when using ormocer veneer was obtained with the Group Ia (19.11 ± 1.92 Mpa) and lowest by Group IIa (8.1 ± 1.04 Mpa), whereas the highest mean bond strength while using ceramic veneer was of similar range for Group Ib (18.04 ± 4.08 Mpa) and Group IIIb (18.07 ± 1.40 Mpa). SEM analysis revealed OF and TE presented mixed type of failure when compared with SA where failure mode was totally adhesive.

    CONCLUSION: OF was found equally efficient like TE. Bond strength of ormocer as a veneer was not inferior to ceramic making it one of the promising additions in the field of dentistry.

    Matched MeSH terms: Adhesives
  3. Fulltext Effect of desensitizing agent on shear bond strength of an adhesive system
    Awang, R.A.R., Masudi, S.M., Mohd Nor, W.Z.W.
    Archives of Orofacial Sciences, 2007;2(1):32-35.
    MyJurnal
    Desensitization of teeth after cavity preparation has been recommended in an attempt to avoid post-operative sensitivity. However, there is concern regarding application effect of desensitizing agent on shear bond strength of the adhesive system used. The purpose of our study was to compare the shear bond strength of adhesive system in two different dentin surface treatments, with and without desensitizing agent. Sixteen extracted human premolars were sectioned off at the coronal portion to expose the flat dentin surfaces. The surfaces were finished using 600 Grit Wet Silicon Carbide abrasive papers. The premolars were randomly assigned to two groups: control and treated with MS Coat desensitizing agent. The desensitizer was applied according to manufacturer’s instruction. Resin composite was bonded to each dentin surface using Prime & Bond ® adhesive system. The composite resin was debonded by shear stress. Mann-Whitney Test was used in statistical analysis. Our result showed that application of MS Coat desensitizing agent on dentin surface had significantly reduced the shear bond strength of the adhesive system used (z = - 0.14, p < 0.05). Thus, we conclude that shear bond strength of Prime & Bond ® NT (Dentsply, USA) adhesive system will be reduced if dentin surface is treated with MS Coat (Sun Medical, Japan) desensitizing agent.
    Matched MeSH terms: Adhesives
  4. Fulltext Inhalant dependence: is there a role of achieving abstinent through supported employment? A case report
    Radhiahtul Akmal Razali, Ahmad Faizal Shamsuddin, Suzaily Wahab, Abdul Kadir Abu Bakar
    ASEAN Journal of Psychiatry, 2015;16(2):249-252.
    MyJurnal
    This case report highlights the success of community services and supported employment program that may be of help to a woman with chronic inhalant use to achieve a complete abstinence. Methods: We report the case of a 45 year old lady who chronically abused glue, presented after 10 years with substance induced psychosis and comorbid mood disorder. Results: Abstinent from inhalant dependence was achieved after series of home treatment services and supported employment program. Conclusion: Provision of acute community service and incorporating this patient in supported employment program contribute to her successful journey in achieving abstinence from inhalant dependence.
    Matched MeSH terms: Adhesives
  5. The potential of dendrimer in delivery of therapeutics for dentistry
    Bapat RA, Dharmadhikari S, Chaubal TV, Amin MCIM, Bapat P, Gorain B, et al.
    Heliyon, 2019 Oct;5(10):e02544.
    PMID: 31687479 DOI: 10.1016/j.heliyon.2019.e02544
    Dendrimers are hyperbranched nanoparticle structures along with its surface modifications can to be used in dental biomaterials for biomimetic remineralisation of enamel and dentin. The review highlights the therapeutic applications of dendrimers in the field of dentistry. It addresses the possible mechanisms of enhancement of mechanical properties of adhesives and resins structure. Dendrimers due to its unique construction of possessing inner hydrophobic and outer hydrophilic structure can act as drug carrier for delivery of antimicrobial drugs for treatment of periodontal diseases and at peripheral dental implant areas. Dendrimers due to its hyperbranched structures can provides a unique drug delivery vehicle for delivery of a drug at specific site for sustained release for therapeutic effects. Thus, dendrimers can be one of the most important constituents which can be incorporated in dental biomaterials for better outcomes in dentistry.
    Matched MeSH terms: Adhesives
  6. Anatomy of wooden core of ottoman composite archery bows
    Gokhan Gunduz, Barbaros Yaman, Seray Ozden, Suleyman Donmez
    Sains Malaysiana, 2013;42:547-552.
    Composite archery bows have been well known and used by Asiatic societies for thousands of years. The Turkish composite bow, made of wood, horn, sinew and glue is one of the most famous and powerful bows in the world. Because of its high draw weight and mechanical efficiency, the Turkish composite bow became a powerful weapon in the Seljuk and the Ottoman empire. In addition to being a powerful weapon of war, at the same time the bow and arrow (archery) continued
    to be a sport of Ottoman (sultans, state officials, janissaries) until the late Ottoman period. In this study of the Ottoman composite archery bows in the collections of Izmir Ethnography Museum, a small wood sample was investigated on the basis of its wood anatomy. The results showed that it was made of maple wood (Acer sp.) and some of its qualitative and quantitative anatomical properties are presented here. One of the key properties for the identification of maple wood is
    the helical thickening throughout the body of the vessel element. Helical thickenings in vessel elements in cutting surfaces of maple-wooden core increase the bonding surface between the wood and sinew-horn. In most of the woods preferred traditionally for bow-making, helical thickenings in tracheids, vessel elements or ground tissue fibres should be taken into account at a hierarchy of cellular structures for elucidating the efficiency of Ottoman composite-wooden bow.
    Matched MeSH terms: Adhesives
  7. Polylactic-co-glycolic acid mesh coated with fibrin or collagen and biological adhesive substance as a prefabricated, degradable, biocompatible, and functional scaffold for regeneration of the urinary bladder wall
    Salem SA, Hwei NM, Bin Saim A, Ho CC, Sagap I, Singh R, et al.
    J Biomed Mater Res A, 2013 Aug;101(8):2237-47.
    PMID: 23349110 DOI: 10.1002/jbm.a.34518
    The chief obstacle for reconstructing the bladder is the absence of a biomaterial, either permanent or biodegradable, that will function as a suitable scaffold for the natural process of regeneration. In this study, polylactic-co-glycolic acid (PLGA) plus collagen or fibrin was evaluated for its suitability as a scaffold for urinary bladder construct. Human adipose-derived stem cells (HADSCs) were cultured, followed by incubation in smooth muscle cells differentiation media. Differentiated HADSCs were then seeded onto PLGA mesh supported with collagen or fibrin. Evaluation of cell-seeded PLGA composite immersed in culture medium was performed under a light and scanning microscope. To determine if the composite is compatible with the urodynamic properties of urinary bladder, porosity and leaking test was performed. The PLGA samples were subjected to tensile testing was pulled until PLGA fibers break. The results showed that the PLGA composite is biocompatible to differentiated HADSCs. PLGA-collagen mesh appeared to be optimal as a cell carrier while the three-layered PLGA-fibrin composite is better in relation to its leaking/ porosity property. A biomechanical test was also performed for three-layered PLGA with biological adhesive and three-layered PLGA alone. The tensile stress at failure was 30.82 ± 3.80 (MPa) and 34.36 ± 2.57 (MPa), respectively. Maximum tensile strain at failure was 19.42 ± 2.24 (mm) and 23.06 ± 2.47 (mm), respectively. Young's modulus was 0.035 ± 0.0083 and 0.043 ± 0.012, respectively. The maximum load at break was 58.55 ± 7.90 (N) and 65.29 ± 4.89 (N), respectively. In conclusion, PLGA-Fibrin fulfils the criteria as a scaffold for urinary bladder reconstruction.
    Matched MeSH terms: Tissue Adhesives/chemistry
  8. Fibrin sealant as an alternative for sutures in periodontal surgery
    Pulikkotil SJ, Nath S
    J Coll Physicians Surg Pak, 2013 Feb;23(2):164-5.
    PMID: 23374528 DOI: 02.2013/JCPSP.164165
    The trial compared wound healing clinically, histologically and morphometrically after the use of fibrin sealant and sutures for periodontal flap closure. Ten patients were selected for this split-mouth randomized controlled clinical trial. On the test site fibrin sealant (F) was applied for flap closure after periodontal flap surgery (n = 10) and on the control site sutures (S) were used (n = 10). Clinically wound healing was observed at 7, 14 and 21 days and biopsy was taken on the 8th day. At seventh day better healing was observed in fibrin sealant site. Histologically mature epithelium and connective tissue formation was seen in fibrin sealant site with increased density of fibroblasts (F = 70.45 ± 7.22; S = 42.95 ± 4.34, p < 0.001) and mature collagen fibers. The suture site had more number of inflammatory cells (S = 32.58 ± 4.29; F = 20.91 ± 4.46, p < 0.001) and more number of blood vessels (S = 11.89 ± 3.64; F = 5.74 ± 2.41, p = 0.005). Fibrin sealant can form a better alternative to sutures for periodontal flap surgery.
    Matched MeSH terms: Tissue Adhesives/therapeutic use*
  9. Fulltext A clinical trial of tissue adhesive (histoacryl) in skin closure of groin wounds
    Teoh MK, Bucknall TE
    Med J Malaysia, 1989 Jun;44(2):122-8.
    PMID: 2696870
    The use of tissue adhesives has been widely studied since the 1960s. Since then they have found use in specialties like plastic surgery, neurosurgery, ENT surgery and dental surgery. Several papers have reported their safe use, both clinically and experimentally, particularly of the newer homologue n-butyl/2-cyanoacrylate (Histoacryl). In this study 43 patients (46 wounds) whose operations involved a groin incision were randomised into two groups for skin closure either with Dexon subcuticular suture (23 wounds) or Histoacryl glue (23 wounds). We found that both sets of wounds healed well with no wound infections or excessive inflammation when assessed at one week and four weeks. However the glued wounds had consistently better cosmesis scores (mean score 4.71 at four weeks) compared to the subcuticular Dexon wounds (mean score 4.00 at four weeks) and P value of less than 0.05. We feel that there is a place for tissue adhesives in skin closure for some general surgical wounds.
    Matched MeSH terms: Tissue Adhesives/therapeutic use*
  10. Fulltext Enhanced gastrointestinal survivability of recombinant Lactococcus lactis using a double coated mucoadhesive film approach
    Tan EW, Tan KY, Phang LV, Kumar PV, In LLA
    PLoS One, 2019;14(7):e0219912.
    PMID: 31335895 DOI: 10.1371/journal.pone.0219912
    Vaccine administration via the oral route is preferable to parenteral routes due to ease of administration. To date, most available oral vaccines comprises of live attenuated pathogens as oppose to peptide-based vaccines due to its low bioavailability within the gastrointestinal (GI) tract. Over the years, probiotic-based peptide delivery vehicles comprising of lactic acid bacteria such as Lactococcus lactis has emerged as an interesting alternative due to its generally recognized as safe (GRAS) status, a fully sequenced genome, transient gut colonization time, and is an efficient cellular factory for heterologous protein production. However, its survivability through the GI tract is low, thus better delivery approaches are being explored to improve its bioavailability. In this study, we employ the incorporation of a double coated mucoadhesive film consisting of sodium alginate and Lycoat RS 720 film as the inner coat. The formulated film exhibits good mechanical properties of tensile strength and percent elongation for manipulation and handling with an entrapment yield of 93.14±2.74%. The formulated mucoadhesive film is subsequently loaded into gelatin capsules with an outer enteric Eudragit L100-55 coating capable of a pH-dependent breakdown above pH 5.5 to protect against gastric digestion. The final product and unprotected controls were subjected to in vitro simulated gastrointestinal digestions to assess its survivability. The product demonstrated enhanced protection with an increase of 69.22±0.67% (gastric) and 40.61±8.23% (intestinal) survivability compared to unprotected controls after 6 hours of sequential digestion. This translates to a 3.5 fold increase in overall survivability. Owing to this, the proposed oral delivery system has shown promising potential as a live gastrointestinal vaccine delivery host. Further studies involving in vivo gastrointestinal survivability and mice immunization tests are currently being carried out to assess the efficacy of this novel oral delivery system in comparison to parenteral routes.
    Matched MeSH terms: Adhesives/chemistry
  11. Biocompatible and mucoadhesive bacterial cellulose-g-poly(acrylic acid) hydrogels for oral protein delivery
    Ahmad N, Amin MC, Mahali SM, Ismail I, Chuang VT
    Mol Pharm, 2014 Nov 3;11(11):4130-42.
    PMID: 25252107 DOI: 10.1021/mp5003015
    Stimuli-responsive bacterial cellulose-g-poly(acrylic acid) hydrogels were investigated for their potential use as an oral delivery system for proteins. These hydrogels were synthesized using electron beam irradiation without any cross-linking agents, thereby eliminating any potential toxic effects associated with cross-linkers. Bovine serum albumin (BSA), a model protein drug, was loaded into the hydrogels, and the release profile in simulated gastrointestinal fluids was investigated. Cumulative release of less than 10% in simulated gastric fluid (SGF) demonstrated the potential of these hydrogels to protect BSA from the acidic environment of the stomach. Subsequent conformational stability analyses of released BSA by SDS-PAGE, circular dichroism, and an esterase activity assay indicated that the structural integrity and bioactivity of BSA was maintained and preserved by the hydrogels. Furthermore, an increase in BSA penetration across intestinal mucosa tissue was observed in an ex vivo penetration experiment. Our fabricated hydrogels exhibited excellent cytocompatibility and showed no sign of toxicity, indicating the safety of these hydrogels for in vivo applications.
    Matched MeSH terms: Adhesives/chemistry
  12. Sutureless skin closure for cleft lip repair
    Mourougayan V
    Cleft Palate Craniofac J, 2006 Nov;43(6):656-8.
    PMID: 17105330
    To study the quality of scars following the use of butyl cyanoacrylate to close the skin during cleft lip repair.
    Matched MeSH terms: Tissue Adhesives/therapeutic use*
  13. Perineal skin tear repair following vaginal birth; skin adhesive versus conventional suture - a randomised controlled trial
    Dasrilsyah RA, Kalok A, Ng BK, Ali A, Teik Chew K, Lim PS
    J Obstet Gynaecol, 2021 Feb;41(2):242-247.
    PMID: 32530340 DOI: 10.1080/01443615.2020.1740917
    This was a prospective randomised controlled trial comparing the effects of first-degree perineal tear repair using adhesive glue versus conventional suturing in terms of pain score, wound complication and patient's satisfaction. One hundred and twenty one women were randomised. The skin adhesive group had a significantly lower pain score at rest as well as during sitting, walking and micturition during the first week of delivery compared to the suture group. The time taken to become pain free was significantly shorter in the tissue adhesive group (3.18 vs. 8.65 days, p < .001). Only two patients who had skin glue experienced wound gaping. No significant difference was observed in the level of satisfaction between the adhesive and suture groups. Tissue adhesive is better than subcuticular suture for repairing first-degree perineal tear as it causes less pain and has shorter recovery time.Impact statementWhat is already known on this subject. First- and second-degree tears following vaginal delivery are common and involved a third of women. Suturing of these tears is advocated to avoid wound gaping and poor healing.What the results of this study add. For first-degree tear repair, tissue adhesive is better than conventional suture in terms of pain reduction and recovery time.What the implications are of these findings for clinical practice and/or further research. Skin adhesive is an ideal method for first-degree perineal tear repair especially in out of hospital settings such as home birth or midwifery-led centre. A larger scale study is needed to establish its feasibility for second- and third-degree tears repair.
    Matched MeSH terms: Tissue Adhesives/therapeutic use*
  14. Fulltext A comparison of aesthetic outcome between tissue adhesive and subcuticular suture in thyroidectomy wound closure in a multiracial country: A randomized controlled trial
    Teoh LY, Chong SS, Hoh SY, Teoh MS, Ng KL
    Asian J Surg, 2019 May;42(5):634-640.
    PMID: 30446424 DOI: 10.1016/j.asjsur.2018.09.014
    OBJECTIVES: Monofilament sutures, both absorbable and non-absorbable, have been used for wound closure. Tissue adhesive has been used in closure of clean, low tension wounds. However, there have been very few published studies on the aesthetic outcomes in neck surgeries. The aim of this study is to compare the patients' and doctors' satisfaction scores in the aesthetic outcome between both methods of closure of thyroidectomy wounds using validated scoring systems.

    METHODS: A double-blinded randomised controlled trial comparing the aesthetic outcome between tissue adhesive and conventional suture was conducted among patients undergoing thyroid and parathyroid surgeries. Ninety-six patients were randomised into two treatment groups. Patients' wounds were scored by an independent observer using the SBSES score at 6 weeks postoperatively and observer component of the POSAS score at 3 months.

    RESULTS: Forty-nine patients were randomised to the tissue adhesive group while forty-seven patients received the conventional method. There was no statistical difference in the aesthetic outcome using the patient's scoring system between both arms, with a median score of 9 (p = 0.25, SD ± 6.5). The observer's satisfaction score using POSAS was also not statistically significant (median score of 14 (p = 0.77, SD ± 6.2)). No significance was found in the observer's median score using the SBSES scoring system either (score 3, p = 0.12, SD ± 1.3). However, there was significant reduction in the duration of closure using glue (4.42 mins vs 6.36 mins, p 

    Matched MeSH terms: Tissue Adhesives*
  15. Aluminum zirconate nanoparticles in etch and rinse adhesive to caries affected dentine: An in-vitro scanning electron microscopy, elemental distribution, antibacterial, degree of conversion and micro-tensile bond strength assessment
    Niazi FH, Luddin N, Alghawazi AM, Al Sebai L, Alqerban A, Alqahtani YM, et al.
    Microsc Res Tech, 2024 Aug;87(8):1955-1964.
    PMID: 38581370 DOI: 10.1002/jemt.24569
    To incorporate different concentrations of Al2O9Zr3 (1%, 5%, and 10%) nanoparticles (NP) into the ER adhesive and subsequently assess the impact of this addition on the degree of conversion, μTBS, and antimicrobial efficacy. The current research involved a wide-ranging examination that merged various investigative techniques, including the application of scanning electron microscopy (SEM) for surface characterization of NP coupled with energy-dispersive x-ray spectroscopy (EDX), Fourier-transform infrared (FTIR) spectroscopy, μTBS testing, and microbial analysis. Teeth were divided into four groups based on the application of modified and unmodified three-step ER adhesive primer. Group 1 (0% Al2O9Zr3 NPs) Control, Group 2 (1% Al2O9Zr3 NPs), Group 3 (5% Al2O9Zr3 NPs), and Group 4 (10% Al2O9Zr3 NPs). EDX analysis of Al2O9Zr3 NPs was performed showing elemental distribution in synthesized NPs. Zirconium (Zr), Aluminum (Al), and Oxides (O2). After primer application, an assessment of the survival rate of Streptococcus mutans was completed. The FTIR spectra were analyzed to observe the characteristic peaks indicating the conversion of double bonds, both before and after the curing process, for the adhesive Etch and rinse containing 1,5,10 wt% Al2O9Zr3 NPs. μTBS and failure mode assessment were performed using a Universal Testing Machine (UTM) and stereomicroscope respectively. The μTBS and S.mutans survival rates comparison among different groups was performed using one-way ANOVA and Tukey post hoc (p = .05). Group 4 (10 wt% Al2O9Zr3 NPs + ER adhesive) specimens exhibited the minimum survival of S.mutans (0.11 ± 0.02 CFU/mL). Nonetheless, Group 1 (0 wt% Al2O9Zr3 NPs + ER adhesive) displayed the maximum surviving S.mutans (0.52 ± 0.08 CFU/mL). Moreover, Group 2 (1 wt% Al2O9Zr3 NPs + ER adhesive) (21.22 ± 0.73 MPa) samples displayed highest μTBS. However, the bond strength was weakest in Group 1 (0 wt% Al2O9Zr3 NPs + ER adhesive) (14.13 ± 0.32 MPa) study samples. The etch-and-rinse adhesive exhibited enhanced antibacterial activity and micro-tensile bond strength (μTBS) when 1% Al2O9Zr3 NPs was incorporated, as opposed to the control group. Nevertheless, the incorporation of Al2O9Zr3 NPs led to a decrease in DC. RESEARCH HIGHLIGHTS: 10 wt% Al2O9Zr3 NPs + ER adhesive specimens exhibited the minimum survival of S.mutans. 1 wt% Al2O9Zr3 NPs + ER adhesive samples displayed the most strong composite/CAD bond. The highest DC was observed in Group 1: 0 wt% Al2O9Zr3 NPs + ER adhesive.
    Matched MeSH terms: Adhesives/chemistry
  16. Fulltext Effect on interleukin-1β and interleukin-8 levels following use of fibrin sealant for periodontal surgery
    Pulikkotil SJ, Nath S
    Aust Dent J, 2014 Jun;59(2):156-64.
    PMID: 24861389 DOI: 10.1111/adj.12178
    Fibrin sealant (FS) is a biologically derived tissue adhesive for securing flaps. The aim of the present randomized controlled clinical trial was to compare early wound healing by assessing interleukin-1β (IL-1β) and interleukin-8 (IL-8) levels from gingival crevicular fluid (GCF) after using FS and suture for periodontal flap closure.
    Matched MeSH terms: Tissue Adhesives/administration & dosage*
  17. Shear bond strengths of buccal tubes
    Purmal K, Sukumaran P
    Aust Orthod J, 2010 Nov;26(2):184-8.
    PMID: 21175030
    To investigate the shear bond strengths of buccal tubes and to determine the sites of failure.
    Matched MeSH terms: Light-Curing of Dental Adhesives*
  18. Fibrin adhesive is better than sutures in pterygium surgery
    Ratnalingam V, Eu AL, Ng GL, Taharin R, John E
    Cornea, 2010 May;29(5):485-9.
    PMID: 20308876 DOI: 10.1097/ICO.0b013e3181c29696
    To evaluate the recurrence rate, surgical time, and postoperative pain between conjunctival autografting with sutures and with fibrin adhesive in pterygium surgery.
    Matched MeSH terms: Tissue Adhesives/therapeutic use*
  19. The use of octyl cyanoacrylate (superglue) in hypospadias repair including its use as a fixator for urethral stents
    Tan HL, Nah SA, Budianto II, Sehat S, Tamba R
    J Pediatr Surg, 2012 Dec;47(12):2294-7.
    PMID: 23217892 DOI: 10.1016/j.jpedsurg.2012.09.022
    Octyl cyanoacrylate has been used for many years for simple skin closure, but its use in hypospadias repair and as a urethral stent fixator has not been previously reported. We report our experience.
    Matched MeSH terms: Tissue Adhesives/therapeutic use*
  20. Properties of the tray adhesive of an addition polymerizing silicone to impression tray materials
    Sulong MZ, Setchell DJ
    J Prosthet Dent, 1991 Dec;66(6):743-7.
    PMID: 1805022
    Adhesive bond strength studies for the tray adhesive of an addition vinyl polysiloxane (President) impression material were conducted with an acrylic resin, chromium-plated brass, and plastic trays. Tensile and shear stress studies were performed on the Instron Universal testing machine. Acrylic resin specimens roughened with 80-grit silicon carbide paper exhibited appreciably higher bond strengths compared with different types of tray material and methods of surface preparation.
    Matched MeSH terms: Adhesives/chemistry*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links