Bemisia tabaci (Gennadius) merupakan spesies lalat putih utama dan berbahaya kepada pertanian. Kajian telah dijalankan di Stesen MARDI Jalan Kebun, Klang, Selangor dari 9 September 2006 hingga 11 November 2007. Objektif kajian ini adalah untuk menilai kesan populasi lalat putih terhadap tanaman cili yang diberi kadar nitrogen yang berbeza (0, 33, 43, 53 g/pokok). Keputusan kajian menunjukkan pokok cili yang dibaja dengan kadar nitrogen yang tinggi menyebabkan peningkatan yang bererti (P<0.05) kepada populasi B. tabaci peringkat belum matang berbanding pada pokok cili yang dibajakan nitrogen pada kadar rendah. Min bilangan B. tabaci pada peringkat belum matang per aras kanopi adalah berbeza secara signifikan (P<0.05) antara aras kanopi dan antara perlakuan. Secara amnya, min bilangan telur dan larva B. tabaci adalah lebih tinggi secara bererti (P<0.05) pada aras kanopi atas berbanding tengah dan bawah. Walau bagaimanapun, min bilangan pupa B. tabaci adalah tinggi secara signifikan (P<0.05) pada aras kanopi bawah berbanding aras kanopi atas dan tengah. Min bilangan B. tabaci pada peringkat belum matang adalah berbeza secara bererti (P<0,05) mengikut minggu selepas pokok cili ditanam pada semua perlakuan. Secara amnya, populasi B. tabaci lebih tinggi semasa awal musim penanaman dan menurun selepasnya hingga ke akhir musim kecuali pada minggu ketiga dan ketujuh selepas pokok cili di tanam.
Kawasan Pentadbiran Putrajaya merangkumi 70% daripada kawasan tadahan Tasik Putrajaya. Kerja-kerja pembangunan yang dijalankan di dalam kawasan Putrajaya kebiasaannya dapat dikawal dengan merujuk kepada peraturan-peraturan dan garis panduan yang telah disediakan oleh pihak Perbadanan Putrajaya dalam memastikan kualiti air Tasik dan Tanah Bencah Putrajaya sentiasa mematuhi piawaian yang telah ditetapkan. Seluas 30% daripada kawasan tadahan Tasik dan Tanah Bencah Putrajaya terletak di luar pentadbiran dan kawalan pihak berkuasa Putrajaya. Kawasan tadahan Utara Putrajaya adalah kawasan tadahan yang luas yang menyumbang sebahagian besar air yang memasuki kawasan Tasik dan Tanah Bencah Putrajaya. Berasal dari anak Sg. Chuau kini ia telah membentuk satu kawasan tasik dan tanah bencah tersebut. Data kualiti air yang dilakukan oleh pihak berkuasa Putrajaya iaitu Perbadanan Putrajaya dari tahun 2002 sehingga 2005 dianalisis bagi mengenalpasti masalah utama kualiti air dari kawasan Tadahan Utara Tanah Bencah Putrajaya. Data kualiti air yang dicatat sepanjang tahun 2002 mendapati purata peratusan parameter yang melebihi standard Putrajaya bagi ammoniakal nitrogen (NH3-N) ialah 43.7%, E. coli 31.3%, TSS 12.5% manakala DO dan COD masing-masing 6.2%. Untuk sepanjang tahun 2003, purata peratusan parameter bagi NH3-N ialah 23.7%, E. coli 18.4%, jumlah koliform 18.4%, TSS 2.6%, DO 13.2%, COD 13.2%, dan BOD 10.5%. Untuk sepanjang tahun 2004, purata peratusan parameter bagi NH3-N ialah 35.5%, E. coli 22.6%, jumlah koliform 12.9%, TSS 9.7%, COD 3.2%, dan BOD 16.1%. Untuk tahun 2005, purata peratusan parameter bagi E. coli 36.4%, NH3-N ialah 22.7%, jumlah koliform 18.2%, BOD 13.6%, DO 4.5%, dan COD juga 4.5%. Secara keseluruhan, analisis bagi tempoh empat tahun ini mendapati parameter NH3-N dan E. coli sering kali menunjuk bacaan yang tidak mematuhi Piawaian Putrajaya. Punca utama masalah kualiti air di kawasan Tadahan Utara Tanah Bencah Putrajaya adalah kegagalan mengurus kawasan tadahan secara bersepadu dan sikap pihak berkepentingan di kawasan kajian tidak mengurus dan mengawal secara menyeluruh masalah air larian, kawasan terbuka dan kelodakan ketika membangunkan kawasan.
Pengkomposan tandan buah kosong (EFB) dan sisa efluen kilang (POME) merupakan pendekatan lestari bagi menukarkan EFB dan POME kepada baja kompos. Pengkomposan adalah satu proses biologi yang memerlukan pengawalan yang optimum agar nutrien yang terhasil adalah tinggi dan stabil. Cabaran utama yang dihadapi oleh industri kompos ialah untuk menghasilkan kompos yang bernutrien tinggi dan stabil. Objektif kajian ini ialah untuk menganalisis prestasi jangka panjang bagi loji kompos terpilih melalui kandungan nutrien kompos yang dihasilkan. Penyelidikan ini mengkaji prestasi tiga tahun bagi empat loji kompos di Malaysia iaitu loji kompos Merotai, loji kompos Binuang, loji kompos Tanah Merah dan loji kompos Elphil. Prestasi kandungan nutrien yang diambil kira termasuklah nitrogen, kalium, nisbah karbon kepada nitrogen, kandungan kelembapan dan agregat kompos. Sebanyak 1,465 set data nutrien dianalisis secara deskriptif. Secara keseluruhannya, prestasi kandungan nutrien kesemua loji kompos yang dikaji berjaya memenuhi keperluan minimum industri sawit. Namun terdapat kes kompos yang dihasilkan mengandungi nutrien kalium yang tidak mencapai keperluan minimum industri dan kandungan kelembapan kompos yang tinggi. Kesimpulannya, masih terdapat ruang untuk penambahbaikan dalam proses pengkomposan agar kompos yang dihasilkan mengandungi nutrien yang stabil dan memenuhi keperluan minimum industri
This paper presents data on nitrogen characteristics in a tropical seagrass meadow located in Sungai Pulai estuary (Johor, Malaysia) and is related to the article "Nitrogen dynamics in tropical seagrass meadows under heavy anthropogenic influence" [1]. Field sampling conducted from August 2015 to May 2016 aimed to collect sediments and seagrass tissues for analysis of nitrogen elemental content and stable isotope values. Sediment samples and seagrass tissue (above-ground and below-ground parts) were collected by using PVC cores. The information is presented as unprocessed and partially data, which incorporates nitrogen content (in %) and δ15N values (‰) of sediment and seagrass tissue samples. Nitrogen loadings in the seagrass sediments, as based on down-core data of sediment samples up to 30 cm depths, should be read with [1] to comprehend the baseline nitrogen dynamics of the study area.
Photocatalytic CO2 reduction is a revolutionary approach to solve imminent energy and environmental issues by replicating the ingenuity of nature. The past decade has witnessed an impetus in the rise of two-dimensional (2D) structure materials as advanced nanomaterials to boost photocatalytic activities. In particular, the use of 2D carbon-based materials is deemed as highly favorable, not only as a green material choice, but also due to their exceptional physicochemical and electrical properties. This Review article presents a diverse range of alterations and compositions derived from 2D carbon-based nanomaterials, mainly graphene and graphitic carbon nitride (g-C3 N4 ), which have remarkably ameliorated the photocatalytic CO2 performance. Herein, the rational design of the photocatalyst systems with consideration of the aspect of dimensionality and the resultant heterostructures at the interface are systematically analyzed to elucidate an insightful perspective on this pacey subject. Finally, a conclusion and outlook on the limitations and prospects of the cutting-edge research field are highlighted.
The rapid generation rate of solid waste is due to the increasing population and industrialization. Nowadays, solid waste has been a major concerning problem in handling and disposal thus adsorption treatment process has been introduced which is an effective and low-cost method in removing organic and inorganic compounds from leachates such as chemical oxygen demand (COD) and ammoniacal nitrogen (NH3-N). A most commonly adsorbent used for the removal of organic and inorganic compounds is activated carbon (AC), yet the main disadvantage is being too expensive in cost. Many researchers tried to use low-cost adsorbent waste materials, such as peat soil, limestone etc. This review article reveals a list of low-cost adsorbent and their capacity of adsorption for the removal of COD and NH3-N. Furthermore, the preparation of these low-cost adsorbents as well as their removal efficiencies, relative cost, and limitation are discussed. The most efficient, cost-effective, and environment-friendly adsorbent can be used for the removal of COD and NH3-N thus can be provided for commercial usage or water treatment plant.Implications: The concentration of organic constituents (COD) and ammonia nitrogen in stabilized landfill leachate has significant strong influences of human health and environmental. This review article shows the list of low-cost adsorbent (i.e., Activated carbon, Peat soil, Zeolite, Limestone, and cockle shell and their capacity of adsorption for the removal of COD and ammonia nitrogen. This would be greatly applicable in future research era as well as conventionally minimizing high-cost materials use and thereby lowering the operating cost of leachate wastewater treatment.
Torrefaction of oil palm empty fruit bunches (EFB) under combustion gas atmosphere was conducted in a batch reactor at 473, 523 and 573K in order to investigate the effect of real combustion gas on torrefaction behavior. The solid mass yield of torrefaction in combustion gas was smaller than that of torrefaction in nitrogen. This may be attributed to the decomposition enhancement effect by oxygen and carbon dioxide in combustion gas. Under combustion gas atmosphere, the solid yield for torrefaction of EFB became smaller as the temperature increased. The representative products of combustion gas torrefaction were carbon dioxide and carbon monoxide (gas phase) and water, phenol and acetic acid (liquid phase). By comparing torrefaction in combustion gas with torrefaction in nitrogen gas, it was found that combustion gas can be utilized as torrefaction gas to save energy and inert gas.
In this study, nitrogen doped titanium dioxide-based dye-sensitised solar cell was successfully fabricated
using screen printing technique to discover the optimisation of process parameters for the solar cell
efficiency using response surface methodology (RSM). Parameter optimisation has been a major concern
in solar cell fabrication. The selected parameters were: nitrogen concentration (15-25 mg of urea), the
film thickness (25-60 µm) and dye loading time (12-24 hours), the optimum condition which yields the
highest efficiency of 3.5% was at 15 mg nitrogen concentration, 25 µm film thickness and 24-hours dye
loading time. Film thickness was found to have a significant influence on efficiency while the loading
time exceeding 18 hours has the least significant effect.
Leptospires are preserved by frequent sub-culturing in semisolid media due to the challenge of low recovery by freezing or liquid nitrogen methods. The present study evaluated three liquid EMJH medium compositions (Medium A: Leptospira medium base EMJH, Leptospira enrichment EMJH, 5-fluorouracil (3%), rabbit serum (1%) and calf serum (1%); Medium B: same as Medium A but without 5-fluorouracil; Medium C: same as Medium B but with the addition of sodium pyruvate) for the revival of leptospires after storage at -80 °C. A total of 18 Leptospira serovars cultured in Medium A was aliquoted into cryogenic vials and directly stored at -80 °C. A hundred microlitre from each serovar culture stored at -80 °C was sub-cultured on a selected time over a period of 30 months into Media A, B and C. Regrowth on Media B and C showed a better and faster recovery (89-100%) (p-value <0.05) compared to Medium A (67-100%). Leptospires can be stored longer at -80 °C and a good recovery could be obtained when sub-cultured on EMJH medium without 5-fluorouracil.
The atmosphere security and regulation of climate change are being continuously highlighted as a pressing issue. The crisis of climate change owing to the anthropogenic carbon dioxide emission has led many governments at federal and provincial levels to promulgate policies to address this concern. Among them is regulating the carbon dioxide emission from major industrial sources such as power plants, petrochemical industries, cement plants, and other industries that depend on the combustion of fossil fuels for energy to operate. In view of this, various CO2 capture and sequestration technologies have been investigated and presented. From this review, adsorption of CO2 on porous solid materials has been gaining increasing attention due to its cost-effectiveness, ease of application, and comparably low energy demand. Despite the myriad of advanced materials such as zeolites, carbons-based, metal-organic frameworks, mesoporous silicas, and polymers being researched, research on activated carbons (ACs) continue to be in the mainstream. Therefore, this review is endeavored to elucidate the adsorption properties of CO2 on activated carbons derived from different sources. Selective adsorption based on pore size/shape and surface chemistry is investigated. Accordingly, the effect of surface modifications of the ACs with NH3, amines, and metal oxides on adsorption performance toward CO2 is evaluated. The adsorption performance of the activated carbons under humid conditions is also reviewed. Finally, activated carbon-based composite has been surveyed and recommended as a feasible strategy to improve AC adsorption properties toward CO2. The activated carbon surface in the graphical abstract is nitrogen rich modified using ammonia through thermal treatment. The values of CO2 emissions by sources are taken from (Yoro and Daramola 2020).
Cyanobacteria are oxygenic photosynthetic organisms which are found across many ecosystems, including freshwater and marine habitats. They are also found on natural and artificial surfaces. In this study, we cultured and characterise a novel cyanobacterium from the surfaces of foam microplastics of tropical coastal waters. We study the chemical ecology of this cyanobacterium, Sphaerothrix gracilis gen. et sp. nov., together with its potential to form harmful cyanobacterial blooms and bioremediation applications to combat plastic pollution. The genome of S. gracilis spanned 6.7 Mbp, with identification of antibiotic resistance, nitrogen-fixation, plastic-degrading and genes involved in harmful metabolite production. The transport of potentially harmful S. gracilis in coastal environments could have severe implications on human health and food security, especially in times of a cyanobacterial bloom.
In this study, computational simulations were used to investigate the performance of a carbon-doped boron nitride nanoribbon (BC2NNR) for hydrogen (H2) gas sensing at elevated temperatures. The adsorption energy and charge transfer were calculated when H2 was simultaneously attached to carbon, boron, and both boron and nitrogen atoms. The sensing ability was further analyzed considering the variations in current-voltage (I-V) characteristics. The simulation results indicated that the energy bandgap of H2 on carbon, boron, and both boron and nitrogen exhibited a marginal effect during temperature variations. However, significant differences were observed in terms of adsorption energy at a temperature of 500 K, wherein the adsorption energy was increased by 99.62% of that observed at 298 K. Additionally, the evaluation of charge transfer indicated that the strongest binding site was achieved at high adsorption energies with high charge transfers. Analysis of the I-V characteristics verified that the currents were considerably affected, particularly when a certain concentration of H2 molecules was added at the highest sensitivity of 15.02% with a bias voltage of 3 V. The sensitivity at 298 K was lower than those observed at 500 and 1000 K. The study findings can form the basis for further experimental investigations on BC2NNR as a hydrogen sensor.
Three specific catalysts, namely ZIF-67 (zeolitic imidazolate framework-67), Co@NCF (Co@Nitrogen-Doped Carbon Framework), and 3D NCF (Three-Dimensional Nitrogen-Doped Carbon Framework), were prepared and studied for pulp and paper mill effluent degradation using heterogeneous activation of peroxymonosulfate (PMS). Numerous characterizations, including scanning electron microscopy (SEM), X-ray diffraction (XRD), and N2 adsorption, were used to characterize the properties of three different catalysts. 3D NCF is remarkably effective at heterogeneous activation of PMS to generate sulfate radicals to degrade pulp and paper mill effluent (PPME) compared to the other as-prepared catalysts. The catalytic activity reveals a sequence of 3D NCF > Co@NCF > ZIF-67.3D NCF could degrade organic pollutants in 30 min at an initial COD concentration of 1146 mg/L of PPME, 0.2 g/L catalysts, 2 g/L PMS, and 50 °C. Consequently, it was observed that the degradation of PPME using 3D NCF followed first-order kinetics, with an activation energy of 40.54 kJ mol-1. Overall, 3D NCF/PMS system reveals promising performance for PPME removal.
Plant growth-promoting rhizobacteria (PGPR) may provide a biological alternative to fix atmospheric N2 and delay N remobilisation in maize plant to increase crop yield, based on an understanding that plant-N remobilisation is directly correlated to its plant senescence. Thus, four PGPR strains were selected from a series of bacterial strains isolated from maize roots at two locations in Malaysia. The PGPR strains were screened in vitro for their biochemical plant growth-promoting (PGP) abilities and plant growth promotion assays. These strains were identified as Klebsiella sp. Br1, Klebsiella pneumoniae Fr1, Bacillus pumilus S1r1 and Acinetobacter sp. S3r2 and a reference strain used was Bacillus subtilis UPMB10. All the PGPR strains were tested positive for N2 fixation, phosphate solubilisation and auxin production by in vitro tests. In a greenhouse experiment with reduced fertiliser-N input (a third of recommended fertiliser-N rate), the N2 fixation abilities of PGPR in association with maize were determined by 15N isotope dilution technique at two harvests, namely, prior to anthesis (D50) and ear harvest (D65). The results indicated that dry biomass of top, root and ear, total N content and bacterial colonisations in non-rhizosphere, rhizosphere and endosphere of maize roots were influenced by PGPR inoculation. In particular, the plants inoculated with B. pumilus S1r1 generally outperformed those with the other treatments. They produced the highest N2 fixing capacity of 30.5% (262 mg N2 fixed plant-1) and 25.5% (304 mg N2 fixed plant-1) of the total N requirement of maize top at D50 and D65, respectively. N remobilisation and plant senescence in maize were delayed by PGPR inoculation, which is an indicative of greater grain production. This is indicated by significant interactions between PGPR strains and time of harvests for parameters on N uptake and at. % 15Ne of tassel. The phenomenon is also supported by the lower N content in tassels of maize treated with PGPR, namely, B. pumilus S1r1, K. pneumoniae Fr1, B. subtilis UPMB10 and Acinetobacter sp. S3r2 at D65 harvest. This study provides evidence that PGPR inoculation, namely, B. pumilus S1r1 can biologically fix atmospheric N2 and provide an alternative technique, besides plant breeding, to delay N remobilisation in maize plant for higher ear yield (up to 30.9%) with reduced fertiliser-N input.
Effects of antibiotic residues on methane production in anaerobic digestion are commonly studied using the following two antibiotic addition methods: (1) adding manure from animals that consume a diet containing antibiotics, and (2) adding antibiotic-free animal manure spiked with antibiotics. This study used chlortetracycline (CTC) as a model antibiotic to examine the effects of the antibiotic addition method on methane production in anaerobic digestion under two different swine wastewater concentrations (0.55 and 0.22mg CTC/g dry manure). The results showed that CTC degradation rate in which manure was directly added at 0.55mg CTC/g (HSPIKE treatment) was lower than the control values and the rest of the treatment groups. Methane production from the HSPIKE treatment was reduced (p<0.05) by 12% during the whole experimental period and 15% during the first 7days. The treatments had no significant effect on the pH and chemical oxygen demand value of the digesters, and the total nitrogen of the 0.55mg CTC/kg manure collected from mediated swine was significantly higher than the other values. Therefore, different methane production under different antibiotic addition methods might be explained by the microbial activity and the concentrations of antibiotic intermediate products and metabolites. Because the primary entry route of veterinary antibiotics into an anaerobic digester is by contaminated animal manure, the most appropriate method for studying antibiotic residue effects on methane production may be using manure from animals that are given a particular antibiotic, rather than adding the antibiotic directly to the anaerobic digester.
As basic information for assessing reactivity and functionality of wetland-associated dissolved organic matter (DOM) based on their composition and structural properties, chemical characteristics of N in ultrafiltered DOM (UDON; >1 kD) isolated from wetland-associated rivers in three climates (cool-temperate, Hokkaido, Japan; sub-tropical, Florida, USA; tropical, Sarawak, Malaysia) were investigated. The UDON was isolated during dry and wet seasons, or during spring, summer, and autumn. The proportion of UDON present as humic substances, which was estimated as the DAX-8 adsorbed fraction, ranged from 47 to 91%, with larger values in the Sarawak than at the other sites. The yield of hydrolyzable amino acid N ranged 1.24 to 7.01 mg g(-1), which correlated positively to the total N content of UDOM and tended to be larger in the order of Florida>Hokkaido>Sarawak samples. X-ray photoelectron N1s spectra of UDON showed a strong negative correlation between the relative abundances of amide/peptide N and primary amine N. The relative abundances of amide/peptide N and primary amine N in the Sarawak samples were smaller (70-76%) and larger (20-23%) respectively compared to those (80-88% and 4-9%) in the Florida and Hokkaido samples. Assuming terminal amino groups and amide N of peptides as major constituents of primary amine N and amide/peptide N, respectively, the average molecular weight of peptides was smaller in the Sarawak samples than that in the Florida and Hokkaido samples. Seasonal variations in UDON composition were scarce in the Sarawak and Florida samples, whereas the distribution of humic substance-N and nonhumic substance-N and compositions of amino acids and N functional groups showed a clear seasonality in the Hokkaido samples. While aromatic N increased from spring to autumn, contributions from fresh proteinaceous materials were also enhanced during autumn, resulting in the highest N content of UDOM for this season.
The characteristics of urban stormwater pollution in the tropics are still poorly understood. This issue is crucial to the tropical environment because its rainfall and runoff generation processes are so different from temperate regions. In this regard, a stormwater monitoring program was carried out at three urban catchments (e.g. residential, commercial and industrial) in the southern part of Peninsular Malaysia. A total of 51 storm events were collected at these three catchments. Samples were analyzed for total suspended solids, 5-day biochemical oxygen demand, chemical oxygen demand (COD), oil and grease, nitrate nitrogen, nitrite nitrogen, ammonia nitrogen (NH3-N), soluble reactive phosphorus and total phosphorus. Principal component analysis (PCA) and hierarchical cluster analysis were used to interpret the stormwater quality data for pattern recognition and identification of possible sources. The most likely sources of stormwater pollutants at the residential catchment were from surface soil and leachate of fertilizer from domestic lawns and gardens, whereas the most likely sources for the commercial catchment were from discharges of food waste and washing detergent. In the industrial catchment, the major sources of pollutants were discharges from workshops and factories. The PCA factors further revealed that COD and NH3-N were the major pollutants influencing the runoff quality in all three catchments.
The objective of this study was to evaluate the effects ofNi(II) and Cr(VI) individually and in combination on the simultaneous removal of chemical oxygen demand (COD), nitrogen and metals under a sequencing batch reactor (SBR) operation. Three identical laboratory-scale SBRs were operated with FILL, REACT, SETTLE, DRAW and IDLE periods in a ratio of 1:12:1:2:8 for a cycle time of 24 h until the steady state was achieved. Nickel(II) at increasing concentrations up to 35 mg/L was added to one of the reactors; Cr(VI) at increasing concentrations up to 25 mg/L was added to a second reactor; while a combination of Ni(II) and Cr(VI) in equal concentrations up to 10 mg/L was added to a third reactor. The results demonstrate that both Ni(II) and Cr(VI) exerted a more pronounced inhibitory effect on the removal of ammonia nitrogen (AN) than on COD removal. Synergistic and antagonistic inhibitory effects on the rates of COD and AN removal, respectively, were observed for the 50% Ni(II) and 50% Cr(VI) (w/w) mixture in the concentration range between 10 and 20 mg/L. The simultaneous presence of 50% Ni(II) and 50% Cr(VI) at a concentration of 20 mg/L resulted in system failure.
This study assesses four predictive ecological models; Fuzzy Logic (FL), Recurrent Artificial Neural Network (RANN), Hybrid Evolutionary Algorithm (HEA) and multiple linear regressions (MLR) to forecast chlorophyll- a concentration using limnological data from 2001 through 2004 of unstratified shallow, oligotrophic to mesotrophic tropical Putrajaya Lake (Malaysia). Performances of the models are assessed using Root Mean Square Error (RMSE), correlation coefficient (r), and Area under the Receiving Operating Characteristic (ROC) curve (AUC). Chlorophyll-a have been used to estimate algal biomass in aquatic ecosystem as it is common in most algae. Algal biomass indicates of the trophic status of a water body. Chlorophyll- a therefore, is an effective indicator for monitoring eutrophication which is a common problem of lakes and reservoirs all over the world. Assessments of these predictive models are necessary towards developing a reliable algorithm to estimate chlorophyll- a concentration for eutrophication management of tropical lakes.
In this research, the capability of lateritic soil used as coagulant for the treatment of stabilized leachate from the Penang-Malaysia Landfill Site was investigated. The evaluation of lateritic soil coagulant in comparison with commercialized chemical coagulants, such as alum, was performed using conventional jar test experiments. The optimum pH and coagulant dosage were identified for the lateritic soil coagulant and the comparative alum coagulant. It was found that the application of lateritic soil coagulant was quite efficient in the removal of COD, color and ammoniacal-nitrogen content from the landfill leachate. The optimal pH value was 2.0, while 14 g/L of lateritic soil coagulant was sufficient in removing 65.7% COD, 81.8% color and 41.2% ammoniacal-nitrogen. Conversely, the optimal pH and coagulant dosage for the alum were pH 4.8 and 10 g/L respectively, where 85.4% COD, 96.4% color and 47.6% ammoniacal-nitrogen were removed from the same leachate sample. Additionally, the Sludge Volume Index (SVI) ratio of alum and lateritic soil coagulant was 53:1, which indicated that less sludge was produced and was an environmentally friendly product. Therefore, lateritic soil coagulant can be considered a viable alternative in the treatment of landfill leachate.