Displaying publications 121 - 140 of 264 in total

Abstract:
Sort:
  1. Mechanical and bioactive properties of mullite reinforced pseudowollastonite biocomposite
    Farah ‘Atiqah Abdul Azam, Roslinda Shamsudin, Zalita Zainuddin, Muhammad Azmi Abdul Hamid, Min Hwei Ng, Rashita Abdul Rashid
    Sains Malaysiana, 2018;47:2141-2149.
    Bioactive composites consist of pseudowollastonite and mullite synthesized from natural resources was developed for
    bone implant applications. To realize such applications, a mechanical test of these composites and in vitro bioactivity in
    SBF solution were studied. The present paper reports pseudowollastonite synthesized from the rice husk ash and limestone
    reinforced with 10, 20 and 30 wt. % of mullite. Influence of sintering temperature, phase composition, morphology towards
    mechanical properties of various pseudowollastonite-mullite (PSW-M) composites was examined prior to the bioactivity
    test. It was found that pseudowollastonite with the addition of 20 wt. % of mullite sintered at 1150°C gave the best result
    for diametral tensile strength (DTS) and hardness with the value of 8.8 ± 0.15 MPa and 3.79 ± 0.13 GPa, respectively.
    The obvious increment in the mechanical strength was due to the formation of liquid phase CaAl2
    O3
    during sintering at
    1150°C. In addition, the formation of fibrous apatite (HA) layer of amorphous calcium phosphate (ACP) with Ca/P ratio
    1.8 on PSW20M sample confirmed the good bioactivity of the composite.
  2. Physical properties and biocompatibility of oligochitosan membrane film as wound dressing
    Ujang Z, Abdul Rashid AH, Suboh SK, Halim AS, Lim CK
    J Appl Biomater Funct Mater, 2014 Dec 30;12(3):155-62.
    PMID: 24700269 DOI: 10.5301/jabfm.5000190
    BACKGROUND: The physical and biological characteristics of oligochitosan (O-C) film, including its barrier and mechanical properties, in vitro cytotoxicity and in vivo biocompatibility, were studied to assess its potential use as a wound dressing.

    METHODS: Membrane films were prepared from water-soluble O-C solution blended with various concentrations of glycerol to modify the physical properties of the films. In vitro and in vivo biocompatibility evaluations were performed using primary human skin fibroblast cultures and subcutaneous implantation in a rat model, respectively.

    RESULTS: Addition of glycerol significantly influenced the barrier and mechanical properties of the films. Water absorption capacity was in the range of 80%-160%, whereas water vapor transmission rate varied from 1,180 to 1,618 g/m2 per day. Both properties increased with increasing glycerol concentration. Tensile strength decreased while elongation at break increased with the addition of glycerol. O-C films were found to be noncytotoxic to human fibroblast cultures and histological examination proved that films are biocompatible.

    CONCLUSION: These results indicate that the membrane film from O-C has potential application as a wound-dressing material.

  3. Fulltext Sustainable supply chain design: a configurational approach
    Masoumik SM, Abdul-Rashid SH, Olugu EU, Raja Ghazilla RA
    ScientificWorldJournal, 2014;2014:897121.
    PMID: 24523652 DOI: 10.1155/2014/897121
    Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research.
  4. Fulltext Walking on thin ice! Identifying methamphetamine "drug mules" on digital plain radiography
    Abdul Rashid SN, Mohamad Saini SB, Abdul Hamid S, Muhammad SJ, Mahmud R, Thali MJ, et al.
    Br J Radiol, 2014 Apr;87(1036):20130472.
    PMID: 24472728 DOI: 10.1259/bjr.20130472
    The purpose of this study was to retrospectively evaluate the sensitivity, specificity and accuracy of identifying methamphetamine (MA) internal payloads in "drug mules" by plain abdominal digital radiography (DR).
  5. Fulltext Temperature-insensitive bend sensor using entirely centered Erbium doping in the fiber core
    Ahmad H, Zulkifli MZ, Muhammad FD, Samangun JM, Abdul-Rashid HA, Harun SW
    Sensors (Basel), 2013;13(7):9536-46.
    PMID: 23881146 DOI: 10.3390/s130709536
    A fiber based bend sensor using a uniquely designed Bend-Sensitive Erbium Doped Fiber (BSEDF) is proposed and demonstrated. The BSEDF has two core regions, namely an undoped outer region with a diameter of about 9.38 μm encompassing a doped, inner core region with a diameter of 4.00 μm. The doped core region has about 400 ppm of an Er2O3 dopant. Pumping the BSEDF with a conventional 980 nm laser diode gives an Amplified Spontaneous Emission (ASE) spectrum spanning from 1,510 nm to over 1,560 nm at the output power level of about -58 dBm. The ASE spectrum has a peak power of -52 dBm at a central wavelength of 1,533 nm when not spooled. Spooling the BSEDF with diameters of 10 cm to 2 cm yields decreasing peak powers from -57.0 dBm to -61.8 dBm, while the central wavelength remains unchanged. The output is highly stable over time, with a low temperature sensitivity of around ~0.005 dBm/°C, thus allowing for the development of a highly stable sensor system based in the change of the peak power alone.
  6. Fulltext Knowledge of colorectal cancer among patients presenting with rectal bleeding and its association with delay in seeking medical advice
    Mohd Hashim S, Tong SF, Omar K, Abdul Rashid MR, Shah SA, Sagap I
    Asian Pac J Cancer Prev, 2011;12(8):2007-11.
    PMID: 22292642
    BACKGROUND: Knowledge is believed to be a driving factor for patients' early presentation for healthcare. This study was conducted to assess knowledge of colorectal cancer among subjects presenting with rectal bleeding and to determine its association with late presentation.

    METHODS: A cross-sectional study of 80 patients with rectal bleeding, aged 40 and above, was conducted between December 2008 and June 2009 in the endoscopy unit, University Kebangsaan Malaysia Medical Centre. The research instruments used in this study was a self-administered questionnaire including data on duration of rectal bleeding, first medical consultation and knowledge of colorectal cancer.

    RESULTS: Sixty percent of subjects with rectal bleeding delayed seeking medical advice. Subjects were more aware of symptoms of non-colorectal cancers compared to symptoms of colorectal cancer. The majority of subjects (63.8%) correctly identified rectal bleeding as a symptom but were not aware of the best screening method to detect colorectal cancer. Half of the subjects knew increasing age and genetic background to be risk factors for colorectal carcinoma. However, knowledge of colorectal cancer was not found to be significantly associated with delay in seeking help.

    CONCLUSION: Findings indicate poor awareness of colorectal cancer among the subjects. Although public education of colorectal cancer is important for early presentation on rectal bleeding, further studies are advocated to evaluate other factors influencing patients' help seeking behavior other than knowledge.
  7. Finite element analysis of Puddu and Tomofix plate fixation for open wedge high tibial osteotomy
    Raja Izaham RM, Abdul Kadir MR, Abdul Rashid AH, Hossain MG, Kamarul T
    Injury, 2012 Jun;43(6):898-902.
    PMID: 22204773 DOI: 10.1016/j.injury.2011.12.006
    The use of open wedge high tibial osteotomy (HTO) to correct varus deformity of the knee is well established. However, the stability of the various implants used in this procedure has not been previously demonstrated. In this study, the two most common types of plates were analysed (1) the Puddu plates that use the dynamic compression plate (DCP) concept, and (2) the Tomofix plate that uses the locking compression plate (LCP) concept. Three dimensional model of the tibia was reconstructed from computed tomography images obtained from the Medical Implant Technology Group datasets. Osteotomy and fixation models were simulated through computational processing. Simulated loading was applied at 60:40 ratios on the medial:lateral aspect during single limb stance. The model was fixed distally in all degrees of freedom. Simulated data generated from the micromotions, displacement and, implant stress were captured. At the prescribed loads, a higher displacement of 3.25 mm was observed for the Puddu plate model (p<0.001). Coincidentally the amount of stresses subjected to this plate, 24.7 MPa, was also significantly lower (p<0.001). There was significant negative correlation (p<0.001) between implant stresses to that of the amount of fracture displacement which signifies a less stable fixation using Puddu plates. In conclusion, this study demonstrates that the Tomofix plate produces superior stability for bony fixation in HTO procedures.
  8. Widely tunable multi-wavelength Brillouinerbium fiber laser utilizing low SBS threshold photonic crystal fiber
    Mohd Nasir MN, Yusoff Z, Al-Mansoori MH, Abdul Rashid HA, Choudhury PK
    Opt Express, 2009 Jul 20;17(15):12829-34.
    PMID: 19654689
    A widely tunable low stimulated Brillouin scattering (SBS) photonic crystal fiber (PCF) based multi-wavelength Brillouin-erbium fiber laser is presented. The fiber laser structure utilizes a pre-amplified Brillouin pump (BP) technique with 100 m of PCF and a tunable band-pass filter within a Fabry-Perot cavity. A total of 14 Brillouin Stokes lines can be tuned over 29 nm from 1540 nm to 1569 nm. The wide tunability was only limited by the bandwidth of the tunable band-pass filter. A constant channel spacing of 0.079 nm and signal to noise ratio (SNR) of more than 20 dB for each Brillouin Stokes lines were also observed.
  9. Dose response characteristics of polymethacrylic acid gel (PMAAG) for a polymerization-based dosimeter using NMR
    Iskandar SM, Elias S, Jumiah H, Asri MT, Masrianis A, Ab Rahman MZ, et al.
    Med J Malaysia, 2004 May;59 Suppl B:212-3.
    PMID: 15468893
    The radiation-response characteristics of polymetharylic acid gel dosimeter prepared with different concentrations of monomer and cross-linker is described in these studies. The dosimeters were prepared under the hypoxic condition in a glove box and were then irradiated with gamma-rays produced by Co-60 radionuclide that was generated at 1.25MeV energy. The irradiation took place at different doses ranged from 0Gy to 19Gy. Due to the radiation activities, chain-reaction polymerisation processes had taken place in the formation of polymethacrylic acid (PMAA) gel, which cause the dose response mechanism increased in the NMR relaxation rates of protons. It has been observed that for higher concentration of monomer and cross-linker, the polymerization rate was increased.
  10. Death by 'ice': fatal methamphetamine intoxication of a body packer case detected by postmortem computed tomography (PMCT) and validated by autopsy
    Bin Abdul Rashid SN, Rahim AS, Thali MJ, Flach PM
    Forensic Sci Med Pathol, 2013 Mar;9(1):82-7.
    PMID: 23404531 DOI: 10.1007/s12024-012-9395-1
    Fatal acute methamphetamine (MA) poisoning in cases of internal drug trafficking is rarely described in the literature. This case study reports an MA 'body packer' who died from fatal methamphetamine intoxication due to leaking drug packages in the alimentary tract. The deceased was examined by postmortem computed tomography (PMCT), and the results were correlated to subsequent autopsy and toxicological findings. The deceased was arrested by the police when he was found disoriented in the city of Kuala Lumpur. He was transferred to the emergency department on suspicion of drug abuse. The initial drug screening was reactive for amphetamines. Shortly after admission to the hospital, he died despite rigorous resuscitation attempts. The postmortem plain chest and abdominal radiographs revealed multiple suspicious opacities in the gastrointestinal tract attributable to body packages. An unenhanced whole body PMCT revealed twenty-five drug packages, twenty-four in the stomach and one in the transverse colon. At least two were disintegrating, and therefore leaking. The autopsy findings were consistent with the PMCT results. Toxicology confirmed the diagnosis of fatal methamphetamine intoxication.
  11. Characterization of a multiwavelength Brillouin-erbium fiber laser based on a linear cavity configuration
    Al-Mansoori MH, Saharudin S, Abdul-Rashid H, Mahdi MA, Abdullah MK
    Appl Opt, 2005 May 10;44(14):2827-31.
    PMID: 15943335
    We experimentally demonstrate a simple method for generating a multiwavelength Brillouin comb by utilizing a linear cavity of hybrid Brillouin-erbium fiber lasers (BEFLs). The optimization of Brillouin pump wavelength, power, and erbium gain played a significant role in determining the maximum number of Brillouin Stokes signals generated. Simultaneous and stable multiple-wavelength laser output of 22 lines with 10.88-GHz channel spacing has been obtained with good flatness. Various parameters such as 980-nm pump power, Brillouin pump wavelength, and Brillouin pump power that affect the performance of a multiwavelength BEFL system have been investigated. An analysis of the tuning range of the system is presented.
  12. Fulltext Toxic effect of high concentration of sonochemically synthesized polyvinylpyrrolidone-coated silver nanoparticles on Citrobacter sp. A1 and Enterococcus sp. C1
    Lau CP, Abdul-Wahab MF, Jaafar J, Chan GF, Abdul Rashid NA
    J Microbiol Immunol Infect, 2017 Aug;50(4):427-434.
    PMID: 26427880 DOI: 10.1016/j.jmii.2015.08.004
    BACKGROUND/PURPOSE: Currently, silver nanoparticles (AgNPs) have gained importance in various industrial applications. However, their impact upon release into the environment on microorganisms remains unclear. The aim of this study was to analyze the effect of polyvinylpyrrolidone-capped AgNPs synthesized in this laboratory on two bacterial strains isolated from the environment, Gram-negative Citrobacter sp. A1 and Gram-positive Enterococcus sp. C1.

    METHODS: Polyvinylpyrrolidone-capped AgNPs were synthesized by ultrasound-assisted chemical reduction. Characterization of the AgNPs involved UV-visible spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, and energy dispersive X-ray spectroscopy. Citrobacter sp. A1 and Enterococcus sp. C1 were exposed to varying concentrations of AgNPs, and cell viability was determined. Scanning electron microscopy was performed to evaluate the morphological alteration of both species upon exposure to AgNPs at 1000 mg/L.

    RESULTS: The synthesized AgNPs were spherical in shape, with an average particle size of 15 nm. The AgNPs had different but prominent effects on either Citrobacter sp. A1 or Enterococcus sp. C1. At an AgNP concentration of 1000 mg/L, Citrobacter sp. A1 retained viability for 6 hours, while Enterococcus sp. C1 retained viability only for 3 hours. Citrobacter sp. A1 appeared to be more resistant to AgNPs than Enterococcus sp. C1. The cell wall of both strains was found to be morphologically altered at that concentration.

    CONCLUSION: Minute and spherical AgNPs significantly affected the viability of the two bacterial strains selected from the environment. Enterococcus sp. C1 was more vulnerable to AgNPs, probably due to its cell wall architecture and the absence of silver resistance-related genes.

  13. Fulltext C1-C2 fusion with absence of C1 posterior arch and presence of C2 high-riding vertebral artery: Is it possible?
    Wong TS, Abdul Rashid ML, Hasan MS, Chiu CK, Chan CYW, Kwan MK
    J Orthop Surg (Hong Kong), 2019 4 9;27(2):2309499019840763.
    PMID: 30955474 DOI: 10.1177/2309499019840763
    The presence of anatomical anomalies such as absence of C1 posterior arch and presence of C2 high-riding vertebral artery may not allow a conventional C1-C2 fusion, and this patient will require occipitocervical fusion. A 62-year-old lady presented with cervical myelopathy. CT scan demonstrated an os odontoideum with C1-C2 dislocation. The posterior arch of atlas on right C1 vertebra was absent, and there was high-riding vertebral artery on left C2. MRI revealed severe cord compression with cord oedema. The chronic atlantoaxial dislocation was reduced successfully with skeletal traction. Hybrid C1-C2 fusion augmented with autogenous local bone graft with corticocancellous iliac crest bone graft was performed to avoid an unnecessary occipitocervical fusion. She was stable throughout surgery and discharged 6 days later. CT scan 6 months post-operation showed a solid posterior fusion mass. Hybrid C1-C2 fusion can be performed to avoid occipitocervical fusion despite presence of abnormal anatomy at C1 and C2 vertebrae.
  14. Incremental benefits of EEG informed fMRI in the study of disorders related to meso-corticolimbic dopamine pathway dysfunction: A systematic review of recent literature
    Syed Nasser N, Ibrahim B, Sharifat H, Abdul Rashid A, Suppiah S
    J Clin Neurosci, 2019 Jul;65:87-99.
    PMID: 30955950 DOI: 10.1016/j.jocn.2019.03.054
    Functional magnetic resonance imaging (fMRI) is a non-invasive imaging modality that enables the assessment of neural connectivity and oxygen utility of the brain using blood oxygen level dependent (BOLD) imaging sequence. Electroencephalography (EEG), on the other hands, looks at cortical electrical impulses of the brain thus detecting brainwave patterns during rest and thought processing. The combination of these two modalities is called fMRI with simultaneous EEG (fMRI-EEG), which has emerged as a new tool for experimental neuroscience assessments and has been applied clinically in many settings, most commonly in epilepsy cases. Recent advances in imaging has led to fMRI-EEG being utilized in behavioural studies which can help in giving an objective assessment of ambiguous cases and help in the assessment of response to treatment by providing a non-invasive biomarker of the disease processes. We aim to review the role and interpretation of fMRI-EEG in studies pertaining to psychiatric disorders and behavioral abnormalities.
  15. Fulltext Clinical and bacteriological profile of diabetic foot infections in a tertiary care
    Goh TC, Bajuri MY, C Nadarajah S, Abdul Rashid AH, Baharuddin S, Zamri KS
    J Foot Ankle Res, 2020 Jun 16;13(1):36.
    PMID: 32546270 DOI: 10.1186/s13047-020-00406-y
    BACKGROUND: Diabetic foot infection is a worldwide health problem is commonly encountered in daily practice. This study was conducted to identify the microbiological profile and antibiotic sensitivity patterns of causative agents identified from diabetic foot infections (DFIs). In addition, the assessment included probable risk factors contributing to infection of ulcers that harbour multidrug-resistant organisms (MDROs) and their outcomes.

    METHODS: We carried out a prospective analysis based on the DFI samples collected from 2016 till 2018. Specimens were cultured with optimal techniques in addition to antibiotic susceptibility based on recommendations from The Clinical and Laboratory Standards Institute (CLSI). A total of 1040 pathogens were isolated with an average of 1.9 pathogens per lesion in 550 patients who were identified with having DFIs during this interval.

    RESULTS: A higher percentage of Gram-negative pathogens (54%) were identified as compared with Gram-positive pathogens (33%) or anaerobes (12%). A total of 85% of the patients were found to have polymicrobial infections. Pseudomonas aeruginosa (19%), Staphylococcus aureus (11%) and Bacteroides species (8%) appeared to be the predominant organisms isolated. In the management of Gram-positive bacteria, the most efficacious treatment was seen with the use of Vancomycin, while Imipenem and Amikacin proved to be effective in the treatment of Gram-negative bacteria.

    CONCLUSION: DFI's are common among Malaysians with diabetes, with a majority of cases displaying polymicrobial aetiology with multi-drug resistant isolates. The data obtained from this study will be valuable in aiding future empirical treatment guidelines in the treatment of DFIs. This study investigated the microbiology of DFIs and their resistance to antibiotics in patients with DFIs that were managed at a Tertiary Care Centre in Malaysia.

  16. Fulltext A life-threatening condition - ruptured ectopic pregnancy with negative urine pregnancy test: A case report
    Mohamad F, Yahya AS, Abdul Rashid A, Devaraj NK, Abdul Manap AH
    Malays Fam Physician, 2021 Mar 25;16(1):121-123.
    PMID: 33948151 DOI: 10.51866/cr1117
    Ectopic pregnancy is an extra-uterine pregnancy and is a potentially life-threatening condition that can lead to death from intra-peritoneal hemorrhage. This case reports a rare occurrence of ruptured tubal pregnancy in which the patient presented early with abdominal pain and a negative urine pregnancy test but subsequently presented again with evidence of intra-peritoneal hemorrhage. A negative urine pregnancy test is often used to rule out pregnancy, but it is not 100% sensitive. Complete assessment is critical in this important diagnosis in order to plan for the appropriate emergency management.
  17. Fulltext A Study on the Utilization of Coal Fly Ash Derived Grog in Clay Ceramics
    Choo TF, Mohd Salleh MA, Kok KY, Matori KA, Abdul Rashid S
    Materials (Basel), 2020 Nov 18;13(22).
    PMID: 33218206 DOI: 10.3390/ma13225218
    Grog is an additive material that plays important roles in ceramic making. It improves the fabrication process of green bodies as well as the physical properties of fired bodies. Few low-cost materials and wastes have found their application as grog in recent years, thus encouraging the replacement of commercial grogs with cost-saving materials. Coal fly ash, a combustion waste produced by coal-fired power plant, has the potential to be converted into grog owing to its small particle sizes and high content of silica and alumina. In this study, grog was derived from coal fly ash and mixed with kaolin clay to produce ceramics. Effects of the grog addition on the resultant ceramics were investigated. It was found that, to a certain extent, the grog addition reduced the firing shrinkage and increased the total porosity of the ceramics. The dimensional stability of the ceramics at a firing temperature of 1200 °C was also not noticeably affected by the grog. However, the grog addition in general had negative effects on the biaxial flexural strength and refractoriness of the ceramics.
  18. Fulltext Angular Deformities of the Knee in Children Treated with Guided Growth
    Jamil K, Yahaya MY, Abd-Rasid AF, Ibrahim S, Abdul-Rashid AH
    Malays Orthop J, 2021 Jul;15(2):26-35.
    PMID: 34429819 DOI: 10.5704/MOJ.2107.005
    Introduction: The guided growth technique is an alternative to corrective osteotomy for treating angular deformities of the extremities. It has the advantage of being minimally invasive and is effective in a growing child. This study reports on the outcome of guided growth technique using a plate in correcting knee angular deformities.

    Material and Methods: We conducted a retrospective study of children with angular deformity of the knee treated by the guided growth technique from January 2010 to December 2015 in a tertiary centre. The guided growth technique was done using either the flexible titanium plate (8-plate) or the 2-hole reconstruction plate. Correction of deformity was assessed on radiographs by evaluating the mechanical axis deviation and tibiofemoral angle. The implants were removed once deformity correction was achieved.

    Results: A total of 17 patients (27 knees) were evaluated. Twenty-two knees (81.5%) achieved complete correction of the deformity. The median age was 4.0 (interquartile range 3.0-6.0) years and the median Body Mass Index (BMI) was 26.0 (25.0-28.0). There were 7 unilateral and 10 bilateral deformities with different pathologies (14 tibia vara, 3 genu valgus). The median rate of correction was 0.71° per month. One patient (1 knee) had screw pull-out and two patients (4 knees) had broken screws in the proximal tibia. Three patients (5 knees) failed to achieve complete correction and were subsequently treated with corrective osteotomies. Out of five patients (8 knees) who were followed-up for at least 12 months after removal of hardware, two had rebound deformities. No permanent growth retardation occurred in our patients.

    Conclusion: Our outcome for guided growth to correct knee angular deformity was similar to other studies. Guided growth is safe to perform in children below 12 years old and has good outcome in idiopathic genu valgus and Langeskiold II for tibia vara. Patients should be observed for recurrence until skeletal maturity following implant removal.

  19. Immune reconstitution inflammatory syndrome and human immunodeficiency virus infection
    Cheo SW, Ahmad Akbar RZ, Abd Rahman F, Abdul Rashid WNF', Tan YA, Low QJ
    QJM, 2020 Nov 01;113(11):809-812.
    PMID: 32275748 DOI: 10.1093/qjmed/hcaa122
  20. Fulltext Optical and Photoacoustic Properties of Laser-Ablated Silver Nanoparticles in a Carbon Dots Solution
    Sadrolhosseini AR, Krishnan G, Shafie S, Abdul Rashid S, Wadi Harun S
    Molecules, 2020 Dec 09;25(24).
    PMID: 33316885 DOI: 10.3390/molecules25245798
    This study used the carbon dots solution for the laser ablation technique to fabricate silver nanoparticles. The ablation time range was from 5 min to 20 min. Analytical methods, including Fourier transform infrared spectroscopy (FTIR), UV-visible spectroscopy, transmission electron microscopy, and Raman spectroscopy were used to categorize the prepared samples. The UV-visible and z-scan techniques provided optical parameters such as linear and nonlinear refractive indices in the range of 1.56759 to 1.81288 and 7.3769 × 10-10 cm2 W-1 to 9.5269 × 10-10 cm2 W-1 and the nonlinear susceptibility was measured in the range of 5.46 × 10-8 to 6.97 × 10-8 esu. The thermal effusivity of prepared samples, which were measured using the photoacoustic technique, were in the range of 0.0941 W s1/2 cm-2 K-1 to 0.8491 W s1/2 cm-2 K-1. The interaction of the prepared sample with fluoride was investigated using a Raman spectrometer. Consequently, the intensity of the Raman signal decreased with the increasing concentration of fluoride, and the detection limit is about 0.1 ppm.
Related Terms
    Try searching for something
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links