Displaying publications 1 - 20 of 124 in total

Abstract:
Sort:
  1. Al Zoubi OM, Normah MN
    Cryo Letters, 2015 Nov-Dec;36(6):379-91.
    PMID: 26963884
    To further understand the survival characteristics of desiccation-sensitive excised embryonic axes of Fortunella polyandra to desiccation and cryopreservation it is necessary to study the impact of drying rates on both the ultrastructure and electrolyte leakage.
    Matched MeSH terms: Desiccation
  2. Chin, C.K., Huda, N., Yang, T.A.
    MyJurnal
    The aim of this study was to produce a high-protein, wet yellow noodle by the incorporation of surimi powder as a protein source and evaluate the effects of the physicochemical and sensory properties of the
    noodle. The surimi powder was prepared by oven drying the wet surimi at 60oC until the moisture content was below 10%. Five concentration levels of surimi powder substitutions were used (0, 5, 10, 15 and 20%), and as a result, the noodles showed a trend that significantly increased (P
    Matched MeSH terms: Desiccation
  3. Show KY, Lee DJ, Chang JS
    Bioresour Technol, 2013 May;135:720-9.
    PMID: 22939595 DOI: 10.1016/j.biortech.2012.08.021
    Biofuels are viewed as promising alternatives to conventional fossil fuels because they have the potential to eliminate major environmental problems created by fossil fuels. Among the still developing biofuel technologies, biodiesel production from algae offers a greater prospect for large-scale practical use, as algae are capable of producing much more yield than other biofuels. While research on algae-based biofuel is still in its developing stage, extensive work on laboratory- and pilot-scale algae harvesting systems with promising prospects has been reported. This paper presented a discussion of the literature review on recent advances in algae separation, harvesting and drying for biofuel production. The review and discussion focus on destabilization of algae, algae harvesting technologies and algae drying processes. Challenges and prospects of algae harvesting are also outlined.
    Matched MeSH terms: Desiccation*
  4. Mohammed NK, Tan CP, Manap YA, Muhialdin BJ, Hussin ASM
    Molecules, 2020 Aug 26;25(17).
    PMID: 32858785 DOI: 10.3390/molecules25173873
    The application of the spray drying technique in the food industry for the production of a broad range of ingredients has become highly desirable compared to other drying techniques. Recently, the spray drying technique has been applied extensively for the production of functional foods, pharmaceuticals and nutraceuticals. Encapsulation using spray drying is highly preferred due to economic advantages compared to other encapsulation methods. Encapsulation of oils using the spray drying technique is carried out in order to enhance the handling properties of the products and to improve oxidation stability by protecting the bioactive compounds. Encapsulation of oils involves several parameters-including inlet and outlet temperatures, total solids, and the type of wall materials-that significantly affect the quality of final product. Therefore, this review highlights the application and optimization of the spray drying process for the encapsulation of oils used as food ingredients.
    Matched MeSH terms: Desiccation*
  5. Sanwiriya, P., Suleiman, N.
    MyJurnal
    The present work was aimed to investigate the effect of drying methods (oven drying, foam mat drying) and temperatures (40°C, 60°C) on the nutritional characteristics of red- and yellow-watermelon rinds. It was found that foam mat drying produced the best results for preserving the most nutrients as compared to the conventional oven drying for both red- and yellow watermelon rinds. Temperature is a significant parameter that affects the nutritional characteristics of watermelon rinds powder for both methods. Finding suggests that foam mat drying at 40°C was the best method for producing watermelon rinds powder as it requires shorter treatment time and gave the best retention of protein and carbohydrate.
    Matched MeSH terms: Desiccation
  6. Onwude DI, Hashim N, Janius RB, Nawi NM, Abdan K
    Compr Rev Food Sci Food Saf, 2016 May;15(3):599-618.
    PMID: 33401820 DOI: 10.1111/1541-4337.12196
    The drying of fruits and vegetables is a complex operation that demands much energy and time. In practice, the drying of fruits and vegetables increases product shelf-life and reduces the bulk and weight of the product, thus simplifying transport. Occasionally, drying may lead to a great decrease in the volume of the product, leading to a decrease in storage space requirements. Studies have shown that dependence purely on experimental drying practices, without mathematical considerations of the drying kinetics, can significantly affect the efficiency of dryers, increase the cost of production, and reduce the quality of the dried product. Thus, the use of mathematical models in estimating the drying kinetics, the behavior, and the energy needed in the drying of agricultural and food products becomes indispensable. This paper presents a comprehensive review of modeling thin-layer drying of fruits and vegetables with particular focus on thin-layer theories, models, and applications since the year 2005. The thin-layer drying behavior of fruits and vegetables is also highlighted. The most frequently used of the newly developed mathematical models for thin-layer drying of fruits and vegetables in the last 10 years are shown. Subsequently, the equations and various conditions used in the estimation of the effective moisture diffusivity, shrinkage effects, and minimum energy requirement are displayed. The authors hope that this review will be of use for future research in terms of modeling, analysis, design, and the optimization of the drying process of fruits and vegetables.
    Matched MeSH terms: Desiccation
  7. Abdullah Z, Taip FS, Kamal SMM, Rahman RZA
    Foods, 2020 Aug 26;9(9).
    PMID: 32858797 DOI: 10.3390/foods9091177
    The moisture content of a powder is a parameter crucial to be controlled in order to produce stable products with a long shelf life. Inferential control is the best solution to control the moisture content due to difficulty in measuring this variable online. In this study, fundamental and empirical approaches were used in designing the nonlinear model-based inferential control of moisture content of coconut milk powder that was produced from co-current spray dryer. A one-dimensional model with integration of reaction engineering approach (REA) model was used to represent the dynamic of the spray drying process. The empirical approach, i.e., nonlinear autoregressive with exogenous input (NARX) and neural network, was used to allow fast and accurate prediction of output response in inferential control. Minimal offset (<0.0003 kg/kg) of the responses at various set points indicate high accuracy of the neural network estimator. The nonlinear model-based inferential control was able to provide stable control response at wider process operating conditions and acceptable disturbance rejection. Nevertheless, the performance of the controller depends on the tuning rules used.
    Matched MeSH terms: Desiccation
  8. Rahman NFA, Shamsudin R, Ismail A, Karim Shah NNA
    Food Sci Biotechnol, 2016;25(Suppl 1):85-90.
    PMID: 30263490 DOI: 10.1007/s10068-016-0102-y
    Changes in physicochemical properties of moisture, ash, and fat contents, and color, due to freeze and oven post-drying treatments on flavedo, albedo, and lamella pomelo fruit peels were investigated. Physicochemical properties influence consumer acceptability and only a few studies are known. Pomelo peels were subjected to freeze drying and conventional drying at 60°C. Fresh pomelo peel was used as a control. Post-drying treatment changes in moisture, ash, and fat contents were observed, compared to controls. Minimal color changes were observed for freeze drying, compared with oven drying for flavedo, albedo, and lamella. Useful information for evaluation of drying treatments that can be used on pomelo peels is provided.
    Matched MeSH terms: Desiccation
  9. Brishti FH, Chay SY, Muhammad K, Ismail-Fitry MR, Zarei M, Karthikeyan S, et al.
    Food Res Int, 2020 12;138(Pt B):109783.
    PMID: 33288169 DOI: 10.1016/j.foodres.2020.109783
    Mung bean is an inexpensive yet sustainable protein source. Current work compared the effects of freeze (FD), spray (SD) and oven drying (OD), on mung bean protein isolate (MBPI) produced on pilot scale. All samples showed no dissociation of protein subunits and were thermally stable (Td = 157.90-158.07 °C). According to morphological studies, FD formed a porous protein while SD and OD formed wrinkled and compact crystals, respectively. FD and SD formed elastic gels with better gelling capacity than OD (aggregated gel). FD showed exceptional protein solubility, water and oil absorption capacity (4.23 g/g and 8.38 g/g, respectively). SD demonstrated the smallest particle size, excellent emulsion activity index (29.21 m2/g) and stability (351.90 min) and the highest β-sheet amount (37.61%). FTIR spectra for all samples showed characteristic peaks which corresponded well to the secondary structure of legume proteins. Rheological analysis revealed that gelation temperature for all MBPI lied around 90 °C. Current work described the different final properties achieved for MBPI produced under different drying techniques that allowed tailoring for different food systems, whereby FD is ideal for meat extender, SD is suitable for meat emulsion while OD is suitable in general protein-based application.
    Matched MeSH terms: Desiccation
  10. Razak, A.A.A., Harrison, A., Alani, A.A.
    Ann Dent, 1996;3(1):-.
    MyJurnal
    The effect of filler content and storage conditions such as drying, storing in water and thermal cycling on linear dimensional changes were investigated and evaluated. The dimensional accuracy studies were performed using a specific designed mould and a coordinate measuring machine. The findings gave support to the view that tiller content is an important factor influencing the physical and mechanical properties of the composite inlay material. The higher tiller content gave less polymerization shrinkage. The greatest linear shrinkage recorded was 0.79 %. The average linear shrinkage (in air, water and thermal cycling) for 79 % filler Prisma AP.H was 0.33 %, for 65 % tiller Prisma AP.H was 0.35 % and for 50 % filler Prisma AP.H was 0.42 %. Generally, dimensional changes was greatest when stored dry. This was followed by materials which were thermal cycled. The least dimensional change recorded was when the materials were stored in water.
    Matched MeSH terms: Desiccation
  11. Yeoh, Cheow Keat, Srimala Sreekantan, Sabar Derita Hutagalung, Zainal Arifin Ahmad
    MyJurnal
    CaCu3Ti4O12 was synthesized starting from a solution of TiO2 to which Ca and Cu nitrates were added. Due to the differences in the solubilities of the Ca, Cu and Ti, initial variations from ideal stoichiometry and a high solution pH was necessary to obtain stoichiometric CaCu3Ti4O12 precipitates. As precipitated samples were amorphous with CuO phases observed after drying of the precipitates at 300 oC. CaCu3Ti4O12 phases were observed after heat treatment at 1000 oC. XRD studies show the presence of CuO and TiO2 in addition to the CaCu3Ti4O12 for non stoichiometric samples. Observations under the SEM show the presence of Cu rich and Ti rich phases in addition to the CaCu3Ti4O12.
    Matched MeSH terms: Desiccation
  12. Cher Pin, S., Rashmi, W., Khalid, M., Chong, C.H., Woo, M.W., Tee, L.H.
    MyJurnal
    The drying of Piper betle Linn (betel) leaf extract using a lab scale spray dryer was simulated using Computational Fluid Dynamics (CFD). Three different turbulent models (standard k-ε, RNG k-ε and realizable k-ε) were used in the present study to determine the most suitable model for predicting the flow profile. Parametric studies were also conducted to evaluate the effect of process variables on the final moisture content. Four different initial droplet sizes (36, 79, 123 and 166 μm) were tested with four sets of combination of hot air temperature (140 and 160°C) and feed rate (4, 9.5 and 15 ml/min). It was found that standard k-ε is the most suitable turbulent model to predict the flow behaviour Moreover, the lowest final moisture content present in samples was obtained at 140°C and a feed rate of 15.0 ml/min.
    Matched MeSH terms: Desiccation
  13. Hee, Y.Y., Chong, G.H.
    MyJurnal
    Hempedu bumi (Andrographis paniculata, AP), also known as the king of bitters, is an herb commonly found in Asian communities for medicinal usage. The drying behaviour of AP at temperatures of 40, 50, and 60oC with vacuum pressures of 10 and 30 kPa was investigated in this study. The data were then fitted with semi-theoretical and theoretical thin-layer drying models. The results reveal that the drying time is significantly (p
    Matched MeSH terms: Desiccation
  14. Huat, Bujang B.K, Faisal AIi, Choong, Foong Heng
    MyJurnal
    Residual soils occur in most countries of the world but the greater areas and depths are normally found in tropical humid areas. In these places, the soil forming processes are still very active and the weathering is much faster than the erosive factor. Most residual exhibit high soil suctions for most of the year. The absence of positive pore water pressure except immediately after rain, renders conventional soil mechanics for saturated soil irrelevant. In particular, the effective stress theories of saturated soil are not applicable at the practical leve l. Ignorance or lack of understanding of the geotechnical behavior of soil in the partially or unsaturated state has caused a lot of damages to infrastructures, buildings and other structures. For instances, the collapsibility and volume change of partially saturated soils in connection with the drying or wetting causes a lot of damage to foundation, roads and other structures. As such, the development of extended soil mechanics, which embraces the soil in the unsaturated state or subjected to soil suction, is essential. This paper examines the collapsibility and volume change behavior specifically of an unsaturated residual soil under various levels of applied matric suction (u -u ), and net mean stress (a-u) in a predetermined stress path. The volume change of ;he"' soil is found to be sensitive to both the applied matric suction and net mean stress. The soil is found to exhibit a collapsibility behavior upon a reduction in applied matric suction to 25 kPa at constant net mean stress.
    Matched MeSH terms: Desiccation
  15. Lee, J.S., Lim, L.S.
    MyJurnal
    This study was designed to elucidate the effects of osmotic dehydration of pumpkin slice prior to hot-air drying. Response Surface Methodology (RSM) with Central Composite Design was used to investigate the influence of three variables, namely sucrose concentration (30-60˚Brix), immersion temperature (35-65˚C) and immersion time (90-120 min). These factors increased the solid gains and decreased the water activity (aw) of the sample; while the temperature and sucrose solution concentration increased the water loss (p
    Matched MeSH terms: Desiccation
  16. Zarei, M., Ahmadi Zenouz, A., Saari, N., Ghanbari, R., Nikkhah, M., Vaziri, M.
    MyJurnal
    Microwave assisted extraction treatments showed the higher pectin yields of 10.07% and 8.83% in pretreated samples by microwave and 9.4% and 8% in the extraction of dried after microwave treatment in lemon peel and apple pomace samples, respectively. Lemon peel pectin in pretreated samples by microwave and extraction of dried after microwave treatment showed the higher degree of esterification 71.8% and 70%, respectively, while apple pomace revealed 68% and 65.4% in same treatments. Furthermore, lemon peel pectin exhibited the highest galacturonic content of 74.5% in extraction of pretreated samples by microwave, while apple pomace pectin indicated the higher galacturonic acid content of 70.5% and 70% in both extraction of dried after microwave treatment and extraction of dried samples. Texture analysis of jellies prepared by various extracted pectin indicated the highest fracturability in the microwave-assisted drying treatment of 33 N and 32.5 N for apple pomace and lemon peel pectin, respectively.
    Matched MeSH terms: Desiccation
  17. Suhaila J, Sayang Mohd Deni, Wan Zawiah Wan Zin, Abdul Aziz Jemain
    This study investigated the spatial pattern and trends of the daily rainfall data in Peninsular Malaysia based on seasonal rainfall indices. Five rainfall indices which describe the main characteristics of rainfall, the total amount of rainfall, frequency of wet days, rainfall intensity, extreme frequency, and extreme intensity, were employed in this study. The statistics of rainfall indices were calculated in terms of their means for four regions in Peninsular Malaysia for the period 1975 to 2004. The findings indicate that the southwest monsoon had the greatest impact on the western part of the Peninsula, particularly in characterizing the rainfall pattern of the northwest region. During this season, the northwest region could be considered as the wettest region since all rainfall indices tested are higher than in other regions of the Peninsula. Otherwise, the northwest region is denoted as the driest part of the Peninsula during the northeast monsoon period. The northwest region is less influenced by the northeast monsoon because of the existence of the Titiwangsa Range, which blocks the region from receiving heavy rainfall. On the other hand, it is found that the lowlands areas such as the eastern part of the Peninsula are strongly characterized by the northeast monsoonal flow. Based on the results of the Mann-Kendall test, as the trend of the total amount of rainfall and the frequency of wet days during the southwest monsoon decrease at most of the stations, the rainfall intensity increases. In contrast, increasing trends in both the total amount of rainfall and the frequency of wet days were observed at several stations during the northeast monsoon, which give rise to the increasing trend of rainfall intensity. The results for both seasons indicate that there are significantly decreasing trends in the frequency of wet days during the extreme events for most of the stations on the peninsula. However, a smaller number of significant trends was found for extreme intensity.
    Matched MeSH terms: Desiccation
  18. Kamaruddin FA, Anggraini V, Kim Huat B, Nahazanan H
    Materials (Basel), 2020 Jun 17;13(12).
    PMID: 32560432 DOI: 10.3390/ma13122753
    The durability of natural and treated clay soil stabilized with lime and alkaline activation (AA) affected by environmental factors (hot and humid) was determined in this study. Investigation and evaluation on the strength of the soil, moisture content, and volume change of the specimen were determined at each curing period (7, 28, and 90 days) based on the weather conditions. An unconfined compressive strength (UCS) of the specimen at three different wetting/drying cycles (one, three, and five cycles) was determined. The findings show that the strength of the treated specimens fluctuated with increment and decrement strength (one and three cycles) in the range of 1.41 to 1.88 MPa (lime) and 2.64 to 8.29 MPa (AA), while for five cycles with a curing period of 90 days the decrement was in the range of 1.62 to 1.25 MPa and 6.06 to 5.89 MPa for lime and AA, respectively. The decrement percentage for treated samples that were subjected to five cycles of wetting and drying in 90 days was found to be 20.38% (lime) and 38.64% (AA), respectively. Therefore, it can be summarized that wetting/drying cycles have a significant influence on the durability, strength, and the volume changes of the specimens.
    Matched MeSH terms: Desiccation
  19. Chang LS, Lau KQ, Tan CP, Yusof YA, Nyam KL, Pui LP
    Acta Sci Pol Technol Aliment, 2021 11 2;20(4):417-421.
    PMID: 34724366 DOI: 10.17306/J.AFS.0903
    BACKGROUND: ‘Kedondong’ fruit is regarded as an exotic fruit that is gaining popularity due to its deliciousness and pleasant flavour. However, this fruit has a short shelf life, leading to problems with postharvest loss. In order to prevent losses, the fruit could be produced as a value-added product. In this study, the ‘kedondong’ fruit was preserved by drying into powder using different drying methods.

    METHODS: The kedondong powder was dried using five methods: convection oven drying, vacuum drying, spray drying, drum drying and freeze drying. The physical properties, flowability and DPPH radical scavenging ability of dried kedondong powder were examined.

    RESULTS: Spray-dried powder provided the significantly (p ≤ 0.05) highest process yield, which was 54.93%. All the powder produced had a low moisture content (3.03 to 5.66%) and water activity (0.19–0.37). Visually, whitish and fine powders were observed on spray-dried and freeze-dried samples, while convection oven-dried and vacuum-dried powder appeared yellowish and coarse. The pH of the reconstituted powders varied from 2.71 to 2.83, where drum-dried powder was the most acidic. Spray-dried powder showed the highest wettability and shortest dissolution time, which was 172.65 s and 10.55 s, respectively. With the exception of drum-dried powder, all the dried powders were classified as non-caking powders. The bulk and tapped density of the powders ranged from 0.32 to 0.70 g/mL and 0.38 to 0.86 g/mL, respectively. Vacuum-dried powder had very good flowability, convection oven-dried and drum-dried powder had good flowability, while spray-dried and drum-dried powder had fair flowability. Antioxidant assay showed that freeze-dried powder exhibited the highest free radical scavenging activity (IC50 = 701.29 μg/mL).

    CONCLUSIONS: This study indicates that spray-dried kedondong powder has great potential in the food industry due to its high process yield and better powder quality. Meanwhile, freeze drying best preserved the antioxidant properties of the powder, which could potentially be used as a functional ingredient as a result. This study is important for the fruit processing industry as it offers an alternative for the farmer to produce kedondong fruit powder because the fruit has a short shelf life. Converting the fruit into powder can diversify the resulting produce into different applications, such as fruit juice, beverages, jam and other food products.

    Matched MeSH terms: Desiccation
  20. Oloruntade, A.J., Mohammad, T.A., Aimrun, W.
    MyJurnal
    Understanding rainfall trend can be a first step in the planning and management of water resources
    especially at the basin scale. In this study, standard tests are used to examine rainfall trends based on monthly, seasonal and mean annual series at the Niger-South Basin, Nigeria, between 1948 and 2008. Rainfall variability index showed that the decade 2000s was the driest (-2.1), while 1950s was the wettest (+0.8), with the decade 1980s being the driest in the second half of the last century, whereas the year 1983 was the driest throughout the series. Over the entire basin, rainfall variability was generally low, but higher intra-monthly than inter-annually. Annual rainfall was dominated by August, contributing about 15%, while December contributed the least (0.7%). On a seasonal scale, July-August-September (JJA) contributed over 40% of the annual rainfall, while rainfall was lowest during December-January-February (DJF) (4.5%). The entire basin displayed negative trends but only 15% indicated significant changes (α ‹ 0.1), while the magnitudes of change varied between -3.75 and -0.25 mm/yr. Similarly, only JJA exhibited insignificant upward trend, while the rest showed negative trends. About eight months of the year showed reducing trends, but only January trend was significant. Annual downward trend was generally observed in the series. The trend during 1948–1977 was negative, but it was positive for the 1978–2008 period. Hence, water resources management planning may require construction of water storage facilities to reduce summer flooding and prevent possible future water scarcity in the basin.
    Matched MeSH terms: Desiccation
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links