Displaying publications 1 - 20 of 38 in total

Abstract:
Sort:
  1. Rozman NAS, Yenn TW, Ring LC, Ab Rashid S, Wen-Nee T, Lim JW
    Trop Life Sci Res, 2023 Mar;34(1):279-291.
    PMID: 37065798 DOI: 10.21315/tlsr2023.34.1.15
    Microbial infection is a frequent complication of diabetic foot ulcers, with up to 82% of ulcers being infected at the initial stage of diabetes. Furthermore, the emergence of beta lactam resistant pathogens managed to eliminate the use of beta lactam antibiotics as a chemotherapeutic alternative. This further increases the amputation and mortality rate. Hence, the aim of this study is to evaluate antimicrobial efficacy of a ketone derivative 2-octylcyclopentanone against diabetic wound pathogens. The inhibitory activity of the compound was determined using disc diffusion and broth microdilution assay. Generally, 2-octylcyclopentanone showed broad-spectrum antimicrobial activity, particularly against beta lactam resistant pathogens. The compound showed comparably better antimicrobial activity than all reference antibiotics, including chloramphenicol, streptomycin, ampicillin and penicillin. In addition, the same compound also inhibits a clinically isolated Pseudonomas aeruginosa that was resistant to all reference antibiotics. The activity was microbicidal based on the low minimal lethality concentration recorded, particularly on MRSA, P. aeruginosa and Candida utilis. The killing efficiency of the compound was concentration dependent. During kill curve analysis, the inhibitory activity of 2-octylcyclopentanone was concentration and time-dependent. 99.9% of reduction of bacterial growth was observed. MRSA and P. aeruginosa, two significant diabetic wound infections, are totally inhibited by the molecule at a concentration of minimum lethality concentration. In short, 2-octylcyclopentanone exhibited significant inhibitory towards wide range of diabetic wound pathogens. Which is considered crucial since it will provide a safe and effective alternative treatment for diabetic ulcer infection.
  2. Choo TF, Mohd Salleh MA, Kok KY, Matori KA, Abdul Rashid S
    Materials (Basel), 2020 Nov 18;13(22).
    PMID: 33218206 DOI: 10.3390/ma13225218
    Grog is an additive material that plays important roles in ceramic making. It improves the fabrication process of green bodies as well as the physical properties of fired bodies. Few low-cost materials and wastes have found their application as grog in recent years, thus encouraging the replacement of commercial grogs with cost-saving materials. Coal fly ash, a combustion waste produced by coal-fired power plant, has the potential to be converted into grog owing to its small particle sizes and high content of silica and alumina. In this study, grog was derived from coal fly ash and mixed with kaolin clay to produce ceramics. Effects of the grog addition on the resultant ceramics were investigated. It was found that, to a certain extent, the grog addition reduced the firing shrinkage and increased the total porosity of the ceramics. The dimensional stability of the ceramics at a firing temperature of 1200 °C was also not noticeably affected by the grog. However, the grog addition in general had negative effects on the biaxial flexural strength and refractoriness of the ceramics.
  3. Yeoh SL, Choong PS, Zakaria R, Kamaruzaman NA, Md Rashid S, Razali MF, et al.
    Toxicon, 2024 Jan;237:107557.
    PMID: 38072318 DOI: 10.1016/j.toxicon.2023.107557
    Derris trifoliata is mainly found in mangrove area in tropical regions and the plant extract is traditionally used for fishing by poisoning. This is the first case report of rotenone poisoning in a child from ingesting Derris trifoliata seed. The child developed altered consciousness, vomiting, hypotension, metabolic acidosis, and acute kidney injury. Species identification of this case requires the collaborative efforts of various agencies. She survived from the poisoning with no neurological sequelae.
  4. Abdul Rashid S, Ab Hamid S, Mohamad Saini S, Muridan R
    Biomed Imaging Interv J, 2012 Apr;8(2):e11.
    PMID: 22970067 MyJurnal DOI: 10.2349/biij.8.2.e11
    Diagnosing acute appendicitis in children can be difficult due to atypical presenting symptoms. While there are reported cases of acute appendicitis or appendiceal masses causing unilateral hydronephrosis, bilateral hydronephrosis as a complication of appendiceal mass is very rare. We report a case of a child who presented with cardinal symptomatology associated with the urogenital tract. Ultrasound (US) investigation showed a pelvic mass causing bilateral hydronephrosis. An initial diagnosis of a pelvic teratoma was made based on the US and computed tomography (CT) scan findings. The final diagnosis of an appendiceal mass causing bilateral hydronephrosis was established intraoperatively.
  5. Rashid S, Anjum S, Ahmad A, Nadeem R, Ahmed M, Shah SAA, et al.
    Biomed Res Int, 2022;2022:6865472.
    PMID: 35865666 DOI: 10.1155/2022/6865472
    Betamethasone is an important glucocorticoids (GCs), frequently used to cure allergies (such as asthma and angioedema), Crohn's disease, skin diseases (such as dermatitis and psoriasis), systemic lupus erythematosus, rheumatic disorders, and leukemia. Present investigation deals to find potential agonist of glucocorticoid receptors after biotransformation of betamethasone dipropionate (1) and to carry out the molecular docking and ADME analyses. Biotransformation of 1 was carried out with Launaea capitata (dandy) roots and Musa acuminate (banana) leaves. M. acuminate furnished low-cost value-added products such as Sananone dipropionate (2) in 5% yields. Further, biocatalysis of Sananone dipropionate (2) with M. acuminate gave Sananone propionate (3) and Sananone (4) in 12% and 7% yields, respectively. However, Sananone (4) was obtained in 37% yields from Launaea capitata. Compound 5 was obtained in 11% yield after β-elimination of propionic acid at C-17 during oxidation of compound 1. The structure elucidation of new compounds 2-5 was accomplished through combined use of X-ray diffraction and NMR (1D and 2D) studies. In addition to this, molecular docking and ADME analyses of all transformed products of 1 were also done. Compounds 1-5 showed -12.53 to -10.11 kcal/mol potential binding affinity with glucocorticoid receptor (GR) and good ADME profile. Moreover, all the compounds showed good oral bioavailability with the octanol/water partition coefficient in the range of 2.23 to 3.65, which indicated that compounds 1-5 were in significant agreement with the given criteria to be considered as drug-like.
  6. Sarkar SM, Rashid SS, Karim KMR, Mustapha SNH, Lian YM, Zamri N, et al.
    J Nanosci Nanotechnol, 2019 05 01;19(5):2856-2861.
    PMID: 30501791 DOI: 10.1166/jnn.2019.16289
    Corn-cobs are an agro-industrial waste and composed of cellulose mostly. In this study cellulose was isolated from the waste corn-cobs and modified to polymeric hydroxamic acid palladium complex 1 and characterized by using a variety of spectroscopic methods such as field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The complex 1 exhibited high catalytic activity towards Suzuki and Heck coupling reactions of activated and deactivated aryl halides to give the respective coupling products with high yield. Moreover, the complex 1 was recovered and recycled five times with no considerable loss of catalytic overall performance.
  7. Tawfiq Zyoud TY, Abdul Rashid SN, Suppiah S, Abdul Rahim E, Mahmud R
    Med J Malaysia, 2020 07;75(4):411-418.
    PMID: 32724006
    INTRODUCTION: Autopsy is one of the most important approaches to identify clearly the exact cause of death, whether it was due to natural causes, sudden death, or traumatic. Various studies have been done in different countries regarding ways to improve the diagnosis during autopsy. The imaging approach is one of the methods that has been used to complement autopsy findings and to enhance the diagnosis for achieving the most accurate post-mortem diagnosis. The aim of this study is to identify the role of imaging modalities that complement routine autopsy and correlate the findings of diagnostic imaging that can help improve the accuracy of diagnosing the cause of death.

    METHODS: We sourced articles from Scopus, Ovid and PubMed databases for journal publications related to post-mortem diagnostic imaging. We highlight the most relevant full articles in English that explain the type of modality that was utilised and the added value it provided for diagnosing the cause of death.

    RESULTS: Minimally invasive autopsies assisted by imaging modalities added a great benefit to forensic medicine, and supported conventional autopsy. In particular the role of post mortem computed tomography (PMCT), post mortem computed tomography angiography (PMMR) and positron emission tomography computed tomography (PMCTA) that have incremental benefits in diagnosing traumatic death, fractures, tissue injuries, as well as the assessment of body height or weight for corpse identification.

    CONCLUSION: PMCT and PMMR, with particular emphasis on PMCTA, can provide higher accuracy than the other modalities. They can be regarded as indispensable methods that should be applied to the routine autopsy protocol, thus improving the findings and accuracy of diagnosing the cause of death.

  8. Shahzad HB, Awais F, Kazmi F, Arshad AI, Manzar S, Rashid S, et al.
    Int J Adolesc Med Health, 2023 Jun 01;35(3):283-290.
    PMID: 37145020 DOI: 10.1515/ijamh-2023-0032
    OBJECTIVES: Most research has focused on determining how popularity and peer pressure impact behaviours, rather than identifying a key feature such as dental aesthetics and studying its impacts in relation to popularity and peer pressure.

    METHODS: A cross sectional study was conducted on a sample of 527 children from four schools located in Lahore, Pakistan. A 14-point questionnaire was developed, using existing measures of peer pressure, and popularity. The selected questions were modified to investigate the issues of dental aesthetics and integrated into the WHO oral health questionnaire for children.

    RESULTS: More than 50 % of the participants indicated popularity issues regarding dental aesthetics. 63.5 % of the responses indicated an influence of relatives and friends, whereas 38 % responses reported of harassment and bullying at schools. Regression analysis shows that the females were 1.99 times more likely to get comments from relative or friends about their teeth and 2.17 times more likely to be bullied or harassed at school due to their teeth when compared to the males. Fathers with a higher education brought about higher popularity and peer pressure issues. Mothers with a higher education were less likely to cause popularity and peer pressure issues than mothers with a lower education. Popularity and peer pressure were both significantly related to higher dental visitation.

    CONCLUSIONS: Popularity and peer pressure have a direct link to dental aesthetics in an individual and are impacted by gender, family relatives and parental influences. The area of popularity and peer pressure related to dental aesthetics can be targeted in health education programs to empower children to adopt better oral health behaviours.

  9. Dellemin NA, Zahari Z, Ahmad Hassali MA, Abdul Rashid S
    J Pharm Bioallied Sci, 2020 10 08;12(4):428-435.
    PMID: 33679089 DOI: 10.4103/jpbs.JPBS_247_19
    Introduction: National Pharmaceutical Regulatory Agency, Ministry of Health Malaysia has received 1018 adverse drug reaction reports related to paracetamol with 1972 adverse events from the year 2000 to February 2015. Serious skin reactions including Stevens-Johnson syndrome (SJS), toxic epidermal necrolysis, and acute generalized exanthematous pustulosis may develop as a result of allergic reactions of paracetamol. This study aimed to develop and validate a questionnaire regarding Knowledge, Attitude, and Perception towards Allergic Reactions of Paracetamol (KAP-ARP) among the general population.

    Materials and Methods: Content and face validity of the KAP-ARP were determined by four experts and 20 respondents, respectively. A questionnaire with 36 items, consisting of 16 Knowledge, 9 Attitude, and 11 Perception items, was distributed to 177 respondents. Exploratory factor analysis (EFA) was performed for construct validity. Cronbach's alpha was used to determine the reliability of the questionnaire.

    Results: EFA constructed 13 Knowledge, 8 Attitude, and 8 Perception items. The final KAP-ARP questionnaire is reliable based on its internal consistency reliability (Knowledge: α = 0.78; Attitude: α = 0.63; Perception: α = 0.70).

    Conclusion: A valid and reliable questionnaire that is useful for measuring KAP-ARP among the general population has been developed.

  10. Langford-Smith AWW, Hasan A, Weston R, Edwards N, Jones AM, Boulton AJM, et al.
    Sci Rep, 2019 02 19;9(1):2309.
    PMID: 30783159 DOI: 10.1038/s41598-019-38921-z
    Endothelial colony forming progenitor cell (ECFC) function is compromised in diabetes, leading to poor vascular endothelial repair, which contributes to impaired diabetic foot ulcer healing. We have generated novel glycomimetic drugs with protective effects against endothelial dysfunction. We investigated the effect of glycomimetic C3 on the functional capacity of diabetic ECFCs. ECFCs were isolated from healthy controls and patients with diabetes with neuroischaemic (NI) or neuropathic (NP) foot ulcers. Functionally, diabetic ECFCs demonstrated delayed colony formation (p 
  11. Shabaneh A, Girei S, Arasu P, Mahdi M, Rashid S, Paiman S, et al.
    Sensors (Basel), 2015;15(5):10452-64.
    PMID: 25946634 DOI: 10.3390/s150510452
    Ethanol is a highly combustible chemical universally designed for biomedical applications. In this paper, optical sensing performance of tapered multimode fiber tip coated with carbon nanotube (CNT) thin film towards aqueous ethanol with different concentrations is investigated. The tapered optical multimode fiber tip is coated with CNT using drop-casting technique and is annealed at 70 °C to enhance the binding of the nanomaterial to the silica fiber tip. The optical fiber tip and the CNT sensing layer are micro-characterized using FESEM and Raman spectroscopy techniques. When the developed sensor was exposed to different concentrations of ethanol (5% to 80%), the sensor reflectance reduced proportionally. The developed sensors showed high sensitivity, repeatability and fast responses (<55 s) towards ethanol.
  12. Yahaya Pudza M, Zainal Abidin Z, Abdul Rashid S, Md Yasin F, Noor ASM, Issa MA
    Nanomaterials (Basel), 2020 Feb 12;10(2).
    PMID: 32059384 DOI: 10.3390/nano10020315
    The materials and substances required for sustainable water treatment by adsorption technique, are still being researched widely by distinguished classes of researchers. Thus, the need to synthesize substances that can effectively clean up pollutants from the environment cannot be overemphasized. So far, materials in bulk forms that are rich in carbon, such as biochar and varieties of activated carbon have been used for various adsorptive purposes. The use of bulk materials for such purposes are not efficient due to minimal surface areas available for adsorption. This study explores the adsorption task at nano dimension using carbon dots (CDs) from tapioca. The properties of carbon structure and its influence on the adsorptive efficacy of carbon nanoparticles were investigated by energy-dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), high resolution transmission electron microscopy (HrTEM), and atomic force microscopy (AFM). The results implied carbon present in CDs are good adsorbents for effective adsorption of heavy metal ions (lead) with removal efficiency of 80.6% in aqueous environment. The adsorption process as explored by both Langmuir and Freundlich isotherms have proven favorability of the adsorption process. Langmuir form two and three have correlation coefficients R2 at 0.9922 and 0.9912, respectively. The Freundlich isotherm confirms CDs as having defined surface heterogeneity and the exponential distribution of active sites. The adsorption of lead unto CDs obeyed the second order kinetic model with coefficient of determination, R2 of 0.9668 and 0.9996 at an initial lead concentration of 20 mg/L and 100 mg/L, respectively. The findings validated the efficiency of CDs derived from tapioca as an excellent material for further utilization in the environmental fields of wastewater pollution detection and clean up, bio-imaging, and chemical sensing applications.
  13. Aljunid SM, Al Bashir L, Ismail AB, Aizuddin AN, Rashid SAZA, Nur AM
    BMC Health Serv Res, 2022 Jan 05;22(1):34.
    PMID: 34986870 DOI: 10.1186/s12913-021-07428-7
    BACKGROUND: The decision to implement new vaccines should be supported by public health and economic evaluations. Therefore, this study was primarily designed to evaluate the economic impact of switching from partially combined vaccine (Pentaxim® plus hepatitis B) to fully combined vaccine (Hexaxim®) in the Malaysian National Immunization Program (NIP) and to investigate healthcare professionals (HCPs)' and parents'/caregivers' perceptions.

    METHODS: In this economic evaluation study, 22 primary healthcare centers were randomly selected in Malaysia between December 2019 and July 2020. The baseline immunization schedule includes switching from Pentaxim® (four doses) and hepatitis B (three doses) to Hexaxim® (four doses), whereas the alternative scheme includes switching from Pentaxim® (four doses) and hepatitis B (three doses) to Hexaxim® (four doses) and hepatitis B (one dose) administered at birth. Direct medical costs were extracted using a costing questionnaire and an observational time and motion chart. Direct non-medical (cost for transportation) and indirect costs (loss of productivity) were derived from parents'/caregivers' questionnaire. Also, HCPs' and parent's/caregivers' perceptions were investigated using structured questionnaires.

    RESULTS: The cost per dose of Pentaxim® plus hepatitis B vs. Hexaxim® for the baseline scheme was Malaysian ringgit (RM) 31.90 (7.7 United States dollar [USD]) vs. 17.10 (4.1 USD) for direct medical cost, RM 54.40 (13.1 USD) vs. RM 27.20 (6.6 USD) for direct non-medical cost, RM 221.33 (53.3 USD) vs. RM 110.66 (26.7 USD) for indirect cost, and RM 307.63 (74.2 USD) vs. RM 155.00 (37.4 USD) for societal (total) cost. A similar trend was observed for the alternative scheme. Compared with Pentaxim® plus hepatitis B, total cost savings per dose of Hexaxim® were RM 137.20 (33.1 USD) and RM 104.70 (25.2 USD) in the baseline and alternative scheme, respectively. Eighty-four percent of physicians and 95% of nurses supported the use of Hexaxim® in the NIP. The majority of parents/caregivers had a positive perception regarding Hexaxim® vaccine in various aspects.

    CONCLUSIONS: Incorporation of Hexaxim® within Malaysian NIP is highly recommended because the use of Hexaxim® has demonstrated substantial direct and indirect cost savings for healthcare providers and parents/caregivers with a high percentage of positive perceptions, compared with Pentaxim® plus hepatitis B.

    TRIAL REGISTRATION: Not applicable.

  14. Ahmad A, Riaz Z, Sattar MA, Khan SA, John EJ, Rashid S, et al.
    Gene, 2020 May 05;737:144479.
    PMID: 32068124 DOI: 10.1016/j.gene.2020.144479
    BACKGROUND: Cardiac and renal dysfunction are often co-morbid pathologies leading to worsening prognosis resulting in difficulty in therapy of left ventricular hypertrophy (LVH). The aim of the current study was to determine the changes in expression of human ortholog genes of hypertension, vascular and cardiac remodeling and hypertensive nephropathy phenotypes under normal, disease and upon treatment with gasotransmitter including H2S (hydrogen sulphide), NO (nitric oxide) and combined (H2S + NO).

    METHODS: A total of 72 Wistar Kyoto rats (with equivalent male and female animals) were recruited in the present study where LVH rat models were treated with H2S and NO individually as well as with both combined. Cardiac and renal physical indices were recorded and relative gene expression were quantified.

    RESULTS: Both cardiac and renal physical indices were significantly modified with individual as well as combined H2S + NO treatment in control and LVH rats. Expression analysis revealed, hypertension, vascular remodeling genes ACE, TNFα and IGF1, mRNAs to be significantly higher (P ≤ 0.05) in the myocardia and renal tissues of LVH rats, while individual and combined H2S + NO treatment resulted in lowering the gene expression to normal/near to normal levels. The cardiac remodeling genes MYH7, TGFβ, SMAD4 and BRG1 expression were significantly up-regulated (P ≤ 0.05) in the myocardia of LVH where the combined H2S + NO treatment resulted in normal/near to normal expression more effectively as compared to individual treatments. In addition individual as well as combined H2S and NO treatment significantly decreased PKD1 expression in renal tissue, which was up-regulated in LVH rats (P ≤ 0.05).

    CONCLUSIONS: The reduction in hemodynamic parameters and cardiac indices as well as alteration in gene expression on treatment of LVH rat model indicates important therapeutic potential of combined treatment with H2S + NO gasotransmitters in hypertension and cardiac hypertrophy when present as co-morbidity with renal complications.

  15. Abdul Bashid HA, Lim HN, Kamaruzaman S, Abdul Rashid S, Yunus R, Huang NM, et al.
    Nanoscale Res Lett, 2017 Dec;12(1):246.
    PMID: 28381070 DOI: 10.1186/s11671-017-2010-3
    A nanocomposite comprising of polypyrrole and reduced graphene oxide was electrodeposited onto a carbon bundle fibre (CBF) through a two-step approach (CBF/PPy-rGO-2). The CBF/PPy-rGO-2 had a highly porous structure compared to a nanocomposite of polypyrrole and reduced graphene oxide that was electrodeposited onto a CBF in a one-step approach (CBF/PPy-rGO), as observed through a field emission scanning electron microscope. An X-ray photoelectron spectroscopic analysis revealed the presence of hydrogen bond between the oxide functional groups of rGO and the amine groups of PPy in PPy-rGO-2 nanocomposite. The fabricated CBF/PPy-rGO-2 nanocomposite material was used as an electrode material in a symmetrical solid-state supercapacitor, and the device yielded a specific capacitance, energy density and power density of 96.16 F g(- 1), 13.35 Wh kg(- 1) and of 322.85 W kg(- 1), respectively. Moreover, the CBF/PPy-rGO-2 showed the capacitance retention of 71% after 500 consecutive charge/discharge cycles at a current density of 1 A g(- 1). The existence of a high degree of porosity in CBF/PPy-rGO-2 significantly improved the conductivity and facilitated the ionic penetration. The CBF/PPy-rGO-2-based symmetrical solid-state supercapacitor device demonstrated outstanding pliability because the cyclic voltammetric curves remained the same upon bending at various angles. Carbon bundle fibre modified with porous polypyrrole/reduced graphene oxide nanocomposite for flexible miniature solid-state supercapacitor.
  16. Kciuk M, Alam M, Ali N, Rashid S, Głowacka P, Sundaraj R, et al.
    Molecules, 2023 Jul 06;28(13).
    PMID: 37446908 DOI: 10.3390/molecules28135246
    Cellular signaling pathways involved in the maintenance of the equilibrium between cell proliferation and apoptosis have emerged as rational targets that can be exploited in the prevention and treatment of cancer. Epigallocatechin-3-gallate (EGCG) is the most abundant phenolic compound found in green tea. It has been shown to regulate multiple crucial cellular signaling pathways, including those mediated by EGFR, JAK-STAT, MAPKs, NF-κB, PI3K-AKT-mTOR, and others. Deregulation of the abovementioned pathways is involved in the pathophysiology of cancer. It has been demonstrated that EGCG may exert anti-proliferative, anti-inflammatory, and apoptosis-inducing effects or induce epigenetic changes. Furthermore, preclinical and clinical studies suggest that EGCG may be used in the treatment of numerous disorders, including cancer. This review aims to summarize the existing knowledge regarding the biological properties of EGCG, especially in the context of cancer treatment and prophylaxis.
  17. Zyoud TYT, Abdul Rashid SN, Suppiah S, Mahmud R, Kabeer A, Abd Manaf R, et al.
    Malays J Pathol, 2020 Dec;42(3):423-431.
    PMID: 33361724
    INTRODUCTION: Post-mortem computed tomography (PMCT) provides information that helps in the determination of the cause of death and corpse identification of disaster victims. One of the methods for corpse identification includes assessment of the body stature. There is a lack of post-mortem imaging studies that focus on the anthropometric assessment of corpses. Our aim was to identify the relationship between cadaveric spine length and autopsy length (AL) among and autopsy length (AL) among a Malaysian population and derive a regression formula for the estimation of corpse body height using PMCT.

    MATERIALS AND METHODS: We retrospectively assessed 107 cadavers that had undergone conventional autopsy and PMCT. We made 5 measurements from the PMCT that included cervical length (CL), thoracic length (TL), lumbosacral length (LS), total column length of the spine, excluding the sacrum and coccyx (TCL), and ellipse line measurement of the whole spine, excluding the sacrum and coccyx (EL). We compared these anthropometric PMCT measurements with AL and correlated them using linear regression analysis.

    RESULTS: The results showed a significant linear relationship existed between TL and LS with AL, which was higher in comparison with the other parameters than the rest of the spine parameters. The linear regression formula derived was: 48.163 + 2.458 (TL) + 2.246 (LS).

    CONCLUSIONS: The linear regression formula derived from PMCT spine length parameters particularly thoracic and lumbar spine gave a finer correlation with autopsy body length and can be used for accurate estimation of cadaveric height. To the best of our knowledge, this is the first ever linear regression formula for cadaveric height assessment using only post mortem CT spine length measurements.

  18. Manzar S, Kazmi F, Bin Shahzad H, Qureshi FA, Shahbaz M, Rashid S
    Dent Med Probl, 2022;59(3):351-356.
    PMID: 36128802 DOI: 10.17219/dmp/149342
    BACKGROUND: The outbreak of the coronavirus disease 2019 (COVID-19) pandemic was associated with the provision of multiple guidelines for the dental profession. All elective procedures were restricted, and only emergency procedures were performed. There was fear and anxiety among dentists while performing aerosol-generating procedures (AGPs), as they were considered to pose a high risk of COVID-19 transmission.

    OBJECTIVES: The aim of this study was to assess the risk of infection with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) during AGPs, and to examine the association between risk severity and the number of AGPs performed per day. The efficacy of personal protective equipment (PPE) was also assessed.

    MATERIAL AND METHODS: This cross-sectional cohort study was based on an online questionnaire form completed by 629 general and specialized dentists between January 1 and February 28, 2021. The collected data referred to the sources of COVID-19 infection, the type of PPE used and the number of AGPs performed each day by dental healthcare professionals (DHCPs). For each question, the absolute numbers of responses as well as percentages were calculated.

    RESULTS: Among the 629 DHCPs, 113 (17.97%) contracted COVID-19. The risk of contracting COVID-19 during AGPs was the same as in the case of non-AGPs, and the infection risk was not associated with the number of AGPs performed per day. The efficacy of a surgical mask with a face shield/eye goggles was higher in comparison with all other types of PPE. Differences in the infection risk across the different types of PPE used were statistically significant (p < 0.001).

    CONCLUSIONS: The risk of COVID-19 transmission during AGPs is the same as in the case of non-AGPs. Thus, restrictions on the performance of elective AGPs should be lifted. On the other hand, the best protection during AGPs is provided by a surgical mask with a face shield/eye goggles.

  19. Abdullah Issa M, Z Abidin Z, Sobri S, Rashid S, Adzir Mahdi M, Azowa Ibrahim N, et al.
    Nanomaterials (Basel), 2019 Oct 22;9(10).
    PMID: 31652527 DOI: 10.3390/nano9101500
    The current research mainly focuses on transforming low-quality waste into value-added nanomaterials and investigating various ways of utilising them. The hydrothermal preparation of highly fluorescent N-doped carbon dots (N-CDs) was obtained from the carboxymethylcellulose (CMC) of oil palm empty fruit bunches and linear-structured polyethyleneimines (LPEI). Transmission electron microscopy (TEM) analysis showed that the obtained N-CDs had an average size of 3.4 nm. The N-CDs were monodispersed in aqueous solution and were strongly fluorescent under the irradiation of ultra-violet light. A detailed description of the morphology and shape was established using Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). It was shown that LPEI were successfully tuned the fluorescence (PL) properties of CDs in both the intrinsic and surface electronic structures, and enhanced the quantum yield (QY) up to 44%. The obtained N-CDs exhibited remarkable PL stability, long lifetime and pH-dependence behaviour, with the excitation/emission maxima of 350/465.5 nm. Impressively, PL enhancement and blue-shifted emission could be seen with the dilution of the original N-CDs solution. The obtained N-CDs were further applied as fluorescent probe for the identification of Cu2+ in aqueous media. The mechanism could be attributed to the particularly high thermodynamic affinity of Cu2+ for the N-chelate groups over the surface of N-CDs and the fast metal-to-ligand binding kinetics. The linear relationship between the relative quenching rate and the concentration of Cu2+ were applied between 1-30 µM, with a detection limit of 0.93 µM. The fluorescent probe was successfully applied for the detection of Cu2+ in real water. Moreover, a solid-state film of N-CDs was prepared in the presence of poly (vinyl alcohol) (PVA) polymer and found to be stable even after 72-h of continuous irradiation to UV-lamp. In contrast to the aqueous N-CDs, the composite film showed only an excitation independent property, with enhanced PL QY of around 47%. Due to the strong and stable emission nature of N-CDs in both aqueous and solid conditions, the obtained N-CDs are ideal for reducing the overall preparation costs and applying them for various biological and environmental applications in the future.
  20. Hasan MM, Das R, Rasheduzzaman M, Hussain MH, Muzahid NH, Salauddin A, et al.
    Virus Res, 2021 May;297:198390.
    PMID: 33737154 DOI: 10.1016/j.virusres.2021.198390
    Coronavirus Disease 2019 (COVID-19) warrants comprehensive investigations of publicly available Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) genomes to gain new insight about their epidemiology, mutations, and pathogenesis. Nearly 0.4 million mutations have been identified so far among the ∼60,000 SARS-CoV-2 genomic sequences. In this study, we compared a total of 371 SARS-CoV-2 published whole genomes reported from different parts of Bangladesh with 467 sequences reported globally to understand the origin of viruses, possible patterns of mutations, and availability of unique mutations. Phylogenetic analyses indicated that SARS-CoV-2 viruses might have transmitted through infected travelers from European countries, and the GR clade was found as predominant in Bangladesh. Our analyses revealed 4604 mutations at the RNA level including 2862 missense mutations, 1192 synonymous mutations, 25 insertions and deletions and 525 other types of mutation. In line with the global trend, D614G mutation in spike glycoprotein was predominantly high (98 %) in Bangladeshi isolates. Interestingly, we found the average number of mutations in ORF1ab, S, ORF3a, M, and N were significantly higher (p < 0.001) for sequences containing the G614 variant compared to those having D614. Previously reported frequent mutations, such as R203K, D614G, G204R, P4715L and I300F at protein levels were also prevalent in Bangladeshi isolates. Additionally, 34 unique amino acid changes were revealed and categorized as originating from different cities. These analyses may increase our understanding of variations in SARS-CoV-2 virus genomes, circulating in Bangladesh and elsewhere.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links