Displaying publications 241 - 260 of 1137 in total

Abstract:
Sort:
  1. Effects of biotic and abiotic environmental stimuli on the morphology and biomass allocation of mimosa pigra l.
    Nur-Zhafarina A., Asyraf M.
    Sains Malaysiana, 2017;46:1241-1248.
    The main focus of this study was to examine the morphology of Mimosa pigra, an invasive weed in response to artificial biotic and abiotic stressors. Seedlings of M. pigra were subjected to stressors such as seed sowing density, leaf defoliation and water regime. Comparatively, morphological performance related to different sowing practices differed significantly (p<0.05), as seedlings that grew from high density populations had lean and outstanding apical growth. A comparison between the four different levels of defoliation on the morphological changes revealed that the increase in leaf defoliation significantly decreased the plant morphological traits (i.e. height, stem diameter and flower bud productivity) and biomass allocation. Relatively low growth performance was found in plants subjected to 100% defoliation, with markedly lower flower bud productivity in comparison with 0%, 25% and 50% (no flower buds compared to 27, 13 and 6 flower buds, respectively). For water stress treatment, M. pigra showed no significant difference (p>0.05) in morphological performance under different levels of water regime. However, seedlings that received low water (LW) treatment showed better growth performance than seedlings that received high water (HW) treatment, which had the lowest morphological traits and biomass allocation.
    Matched MeSH terms: Plant Leaves
  2. Growth stages of torch ginger (Etlingera elatior) plant
    Choon S, Ding P
    Sains Malaysiana, 2016;45:507-515.
    Torch ginger (Etlingera elatior) is a herbaceous clumping plant. It is a multifunctional crop that has been used for culinary, medicinal, antibacterial agent, ornamental and floral arrangement purpose. However, from the literature, no work has been carried out to study its growth and development morphological characteristics. It is important to understand the developmental morphology of the torch ginger plant for research purpose, commercial usage and apply proper production practices by growers for higher yields and profits. Therefore, the aim of this study was to determine the time course of morphological changes during the growth and development of torch ginger. Results showed that it took 155 days from leafy shoot emerging from rhizome until senescence of inflorescence. The growth and development of torch ginger plant were divided into vegetative and reproductive phases. The vegetative phase mainly involved the growth activities of leafy shoot. The transition of vegetative to reproductive phase happened when the inflorescence shoot emerged from the rhizome. In the reproductive phase, the growth and development of the inflorescence were categorized into four phenological stages which were peduncle elongation, inflorescence emergence, flowering and senescence. The growth pattern of the leafy shoot and inflorescence demonstrated a monocarpic plant growth habit with the remobilization of photoassimilates from senescing plant parts to developing true flowers that caused whole-plant senescence. Further research is needed to study the mechanisms that regulate flowering and senescence in torch ginger plant.
    Matched MeSH terms: Plant Leaves
  3. Fulltext Impact of sea-salt on morpho-physiological and biochemical responses in banana (Musa acuminata cv. Berangan)
    Mazumdar P, Lau SE, Singh P, Takhtgahi HM, Harikrishna JA
    Physiol Mol Biol Plants, 2019 May;25(3):713-726.
    PMID: 31168234 DOI: 10.1007/s12298-019-00659-3
    Banana is often grown in coastal-regions, and while known for its sensitivity towards seawater, little is documented on the effect of sea-salt on the growth, physiology and metal homeostasis. Here we report that banana plantlets exposed to sea-salt at extreme (average seawater concentration; 52.7 dS m-1), severe (28.5 dS m-1) or moderate (10.2 dS m-1) salinity levels had reduced root length (2.0-6.0-fold), plant height (1.2-1.6-fold), leaf number (2.0-2.3-fold) and leaf area (3.3-4.0-fold) compared to control plantlets. Degradation of pigments (total chlorophyll: 1.3-12.3-fold, chlorophyll a: 1.3-9.2-fold; chlorophyll b: 1.3-6.9-fold lower and carotenoids: 1.4-3.7-fold lower) reflected vulnerability of photosystems to salt stress. Relative water content showed a maximum decrease of 1.5-fold in salt stress. MDA analysis showed sea-salt exposure triggers 2.3-3.5-fold higher lipid peroxidation. Metal content analysis showed a 73-fold higher Na value from roots exposed to extreme salinity compared to control plantlets. While phenotype was clearly affected, moderate salinity showed no significant alteration of macro (N, P, K and Ca) and micro (Fe, Mn and Cu) metal content. The antioxidant enzymes: SOD (3.2-fold), CAT (1.7-fold) and GR (6-fold) showed higher activity at moderate salinity level compared to control plantlets but lower activity at severe (SOD: 1.3-fold; CAT: 1.5-fold; GR: 2-fold lower) and extreme seawater salinity (SOD: 1.5; CAT: 1.9; GR: 1.3-fold lower). Mild changes in growth and physiology at sea-salt levels equivalent to moderate seawater flooding, indicate that banana will survive such flooding, while extreme seawater inundation will be lethal. This data provides a reference for future salinity-mediated work in banana.
    Matched MeSH terms: Plant Leaves
  4. Fulltext A Comprehensive Review on Chemical and Pharmacological Potential of Viola betonicifolia: A Plant with Multiple Benefits
    Rizwan K, Khan SA, Ahmad I, Rasool N, Ibrahim M, Zubair M, et al.
    Molecules, 2019 Aug 29;24(17).
    PMID: 31470508 DOI: 10.3390/molecules24173138
    Viola betonicifolia (Violaceae) is commonly recognized as "Banafsha" and widely distributed throughout the globe. This plant is of great interest because of its traditional, pharmacological uses. This review mainly emphases on morphology, nutritional composition, and several therapeutic uses, along with pharmacological properties of different parts of this multipurpose plant. Different vegetative parts of this plant (roots, leaves, petioles, and flowers) contained a good profile of essential micro- and macronutrients and are rich source of fat, protein, carbohydrates, and vitamin C. The plant is well known for its pharmacological properties, e.g., antioxidant, antihelminthic, antidepressant, anti-inflammatory, analgesic, and has been reported in the treatment of various neurological diseases. This plant is of high economic value. The plant has potential role in cosmetic industry. This review suggests that V. betonicifolia is a promising source of pharmaceutical agents. This plant is also of significance as ornamental plant, however further studies needed to explore its phytoconstituents and their pharmacological potential. Furthermore, clinical studies are needed to use this plant for benefits of human beings.
    Matched MeSH terms: Plant Leaves
  5. Fulltext Bioconversion of ferulic acid attained from pineapple peels and pineapple crown leaves into vanillic acid and vanillin by Aspergillus niger I-1472
    Tang PL, Hassan O
    BMC Chem, 2020 Dec;14(1):7.
    PMID: 32043090 DOI: 10.1186/s13065-020-0663-y
    This study was conducted to evaluate the potential of pineapple peel (PP) and pineapple crown leaves (PCL) as the substrate for vanillic acid and vanillin production. About 202 ± 18 mg L-1 and 120 ± 11 mg L-1 of ferulic acid was produced from the PP and PCL respectively. By applied response surface methodology, the ferulic acid yield was increased to 1055 ± 160 mg L-1 by treating 19.3% of PP for 76 min, and 328 ± 23 mg L-1 by treating 9.9% of PCL for 36 min in aqueous sodium hydroxide solution at 120 °C. The results revealed that PP extract was better than PCL extract for vanillic acid and vanillin production. Furthermore, the experiment also proved that large volume feeding was more efficient than small volume feeding for high vanillic acid and vanillin yield. Through large volume feeding, about 7 ± 2 mg L-1 of vanillic acid and 5 ± 1 mg L-1 of vanillin was successfully produced from PP extract via Aspergillus niger fermentation.
    Matched MeSH terms: Plant Leaves
  6. Fulltext Mangrove-Associated Fungal Communities Are Differentiated by Geographic Location and Host Structure
    Lee NLY, Huang D, Quek ZBR, Lee JN, Wainwright BJ
    Front Microbiol, 2019;10:2456.
    PMID: 31736902 DOI: 10.3389/fmicb.2019.02456
    Marine fungi on the whole remain understudied, especially in the highly diverse Southeast Asian region. We investigated the fungal communities associated with the mangrove tree Avicennia alba throughout Singapore and Peninsular Malaysia. At each sampling location, we examined ten individual trees, collecting leaves, fruits, pneumatophores, and an adjacent sediment sample from each plant. Amplicon sequencing of the fungal internal transcribed spacer 1 and subsequent analyses reveal significant differences in fungal communities collected from different locations and host structures. Mantel tests and multiple regression on distance matrices show a significant pattern of distance decay with samples collected close to one another having more similar fungal communities than those farther away. Submergence appears to drive part of the variation as host structures that are never submerged (leaves and fruits) have more similar fungal communities relative to those that are covered by water during high tide (pneumatophores and sediment). We suggest that fungi of terrestrial origins dominate structures that are not inundated by tidal regimes, while marine fungi dominate mangrove parts and sediments that are submerged by the incoming tide. Given the critical functions fungi play in all plants, and the important role they can have in determining the success of restoration schemes, we advocate that fungal community composition should be a key consideration in any mangrove restoration or rehabilitation project.
    Matched MeSH terms: Plant Leaves
  7. Metabolite variations and antioxidant activity of Muntingia calabura leaves in response to different drying methods and ethanol ratios elucidated by NMR-based metabolomics
    Zolkeflee NKZ, Isamail NA, Maulidiani M, Abdul Hamid NA, Ramli NS, Azlan A, et al.
    Phytochem Anal, 2021 Jan;32(1):69-83.
    PMID: 31953888 DOI: 10.1002/pca.2917
    INTRODUCTION: Muntingia calabura from the Muntingiaceae family has been documented for several medicinal uses. The combinations of drying treatment and extracting solvents for a plant species need to be determined and optimised to ensure that the extracts contain adequate amounts of the bioactive metabolites.

    OBJECTIVE: Evaluate the metabolite variations and antioxidant activity among M. calabura leaves subjected to different drying methods and extracted with different ethanol ratios using proton nuclear magnetic resonance (1 H-NMR)-based metabolomics. Methodology The antioxidant activity of M. calabura leaves dried with three different drying methods and extracted with three different ethanol ratios was determined by using 2,2-diphenyl-1-picrylhydrazyl (DPPH) and nitric oxide (NO) scavenging assays. The metabolites variation among the extracts and correlation with antioxidant activity were analysed by 1 H-NMR-based metabolomics.

    RESULTS: Muntingia calabura leaves extracted with 50% and 100% ethanol from air-drying and freeze-drying methods had the highest total phenolic content and the lowest IC50 value for the DPPH scavenging activity. Meanwhile, oven-dried leaves extracted with 100% ethanol had the lowest IC50 value for the NO scavenging activity. A total of 43 metabolites, including sugars, organic acids, amino acids, phytosterols, phenolics and terpene glycoside were tentatively identified. A noticeable discrimination was observed in the different ethanol ratios by the principal component analysis. The partial least-squares analysis suggested that 32 compounds out of 43 compounds identified were the contributors to the bioactivities.

    CONCLUSION: The results established set the preliminary steps towards developing this plant into a high value product for phytomedicinal preparations.

    Matched MeSH terms: Plant Leaves
  8. Fulltext De novo transcriptome dataset of Stevia rebaudiana accession MS007
    Samsulrizal NH, Khadzran KS, Shaarani SH, Noh AL, Sundram TC, Naim MA, et al.
    Data Brief, 2020 Feb;28:104811.
    PMID: 31871974 DOI: 10.1016/j.dib.2019.104811
    Stevia rebaudiana (S. rebaudiana) is a herbaceous and perennial plant belonging to Asteraceae family. The genus stevia is well known as a natural producer of sweetener comprising non-caloric and non-carcinogenic steviol glycosides. In recent years, the capability in producing natural sweetner has increased the demand for S. rebaudiana as substitute of processed sugars. Flowering phase of S. rebaudiana has shown to affect the content of steviol glycosides in the leaves. Steviol glycosides level is the highest at the time of flower bud formation and lowest at time preceding and following flower bud formation. Therefore, sequencing and analysing the genes that are involved in flowering phase will provide platform for gene manipulation in increasing steviol glycosides content. The Stevia transcriptome data that include two stages of growth (before flowering and after flowering), were obtained using Illumina RNA-seq technology and can be accessed at NCBI Sequence Read Archive under Accession No. SRX6362785 and SRX6362784.
    Matched MeSH terms: Plant Leaves
  9. Diplodiscus latifii (Malvaceae-Brownlowioideae), a new species from Sabah, Malaysia
    Chung RCK, Soepadmo E
    PhytoKeys, 2020;161:99-106.
    PMID: 33100836 DOI: 10.3897/phytokeys.161.55781
    A new species of Diplodiscus is described and illustrated from one collection made in lowland mixed dipterocarp forest in Sabah, Malaysia. Conspicuous by its twig colour, leaf shape and indumentum, it is probably allied to D. longifolius, but differs in sufficient characters (shape, indumentum, apex and venation of blade, flower bud shape and size, petal diameter, ovary shape and fruit shape and size) to be a species in its own right. A key to the species of Diplodiscus in Malaysia also is provided.
    Matched MeSH terms: Plant Leaves
  10. Fulltext Influence of N6-Benzyladenine and Sucrose on In Vitro Direct Regeneration and Microrhizome Induction of Kaempferia parviflora Wall. Ex Baker, An Important Ethnomedicinal Herb of Asia
    Labrooy C, Abdullah TL, Stanslas J
    Trop Life Sci Res, 2020 Apr;31(1):123-139.
    PMID: 32963715 DOI: 10.21315/tlsr2020.31.1.8
    Kaempferia parviflora is an ethnomedicinally important plant. Conventional propagation of K. parviflora is hindered by slow growth rate, long dormancy periods and dual use of rhizomes for seeds as well as marketable produce. In our study, we developed a promising dual-phase micropropagation protocol to increase number of plantlets, survivability, biomass and quality plantlets for mass production. Multiple shoot regeneration was found most successful on Murashige and Skoog (MS) media supplemented with 35.52 μM N6-benzyladenine (BA) in terms of highest number of shoots (22.4 ± 1.84), leaves (29.27 ± 1.30), and roots (17.8 ± 1.72) per explant. High survivability was observed with an acclimatisation percentage of 100% in sterile perlite medium. This method was shown to be preferable compared to conventional propagation in terms of propagation time and number of plantlets. Regenerated in vitro plantlets were then successfully induced to form microrhizomes in MS media with an optimal concentration of 6% (w/v) sucrose. Increase in microrhizome biomass (35.7 ± 2.59 g per flask), number of microrhizomes (5.2 ± 0.78), shoots (8.5 ± 1.58) and roots (8.5 ± 1.58) were observed for this treatment. This investigation successfully highlights the manipulation of single factors in short time frame to produce a simple and efficient alternative propagation method for K. parviflora.
    Matched MeSH terms: Plant Leaves
  11. Molecular docking and molecular dynamics simulations studies on β-glucosidase and xylanase Trichoderma asperellum to predict degradation order of cellulosic components in oil palm leaves for nanocellulose preparation
    Bahaman AH, Wahab RA, Abdul Hamid AA, Abd Halim KB, Kaya Y
    J Biomol Struct Dyn, 2021 Apr;39(7):2628-2641.
    PMID: 32248752 DOI: 10.1080/07391102.2020.1751713
    Literature has shown that oil palm leaves (OPL) can be transformed into nanocellulose (NC) by fungal lignocellulosic enzymes, particularly those produced by the Trichoderma species. However, mechanism of β-glucosidase and xylanase selectivity to degrade lignin, hemicellulose and cellulose in OPL for NC production remains relatively vague. The study aimed to comprehend this aspect by an in silico approach of molecular docking, molecular dynamics (MD) simulation and Molecular-mechanics Poisson-Boltzmann surface area (MM-PBSA) analysis, to compare interactions between the β-glucosidase- and xylanase from Trichoderma asperellum UC1 in complex with each substrate. Molecular docking of the enzyme-substrate complex showed residues Glu165-Asp226-Glu423 and Arg155-Glu210-Ser160 being the likely catalytic residues of β-glucosidase and xylanase, respectively. The binding affinity of β-glucosidase for the substrates are as follows: cellulose (-8.1 kcal mol-1) > lignin (-7.9 kcal mol-1) > hemicellulose (-7.8 kcal mol-1), whereas, xylanase showed a corresponding preference for; hemicellulose (-6.7 kcal mol-1) > cellulose (-5.8 kcal mol-1) > lignin (-5.7 kcal mol-1). Selectivity of both enzymes was reiterated by MD simulations where interactions between β-glucosidase-cellulose and xylanase-hemicellulose were the strongest. Notably low free-binding energy (ΔGbind) of β-glucosidase and xylanase in complex with cellulose (-207.23 +/- 47.13 kJ/mol) and hemicellulose (-131.48 +/- 24.57 kJ/mol) were observed, respectively. The findings thus successfully identified the cellulose component selectivity of the polymer-acting β-glucosidase and xylanase of T. asperellum UC1.Communicated by Ramaswamy H. Sarma.
    Matched MeSH terms: Plant Leaves
  12. Fulltext Physical and Physiological Monitoring on Red Palm Weevil-Infested Oil Palms
    Harith-Fadzilah N, Haris-Hussain M, Abd Ghani I, Zakaria A, Amit S, Zainal Z, et al.
    Insects, 2020 Jun 30;11(7).
    PMID: 32630104 DOI: 10.3390/insects11070407
    The red palm weevil (RPW) is a stem boring Coleoptera that decimates host palm trees from within. The challenge of managing this pest is due to a lack of physical symptoms during the early stages of infestation. Investigating the physiological changes that occur within RPW-infested palm trees may be useful in establishing a new approach in RPW detection. In this study, the effects of RPW infestation were investigated in Elaeis guineensis by observing changes in physical and physiological parameters during the progress of infestation by visual inspection and the comparison of growth, gas exchange, stomatal conductance, and chlorophyll content between the non-infested control, physically wounded, and RPW-infested E. guineensis groups. During the study period, four distinct levels of physical infestation were observed and recorded. The RPW-infested group displayed significantly lower maximum photosynthesis activity (Amax) starting from the third week post-infestation. However, growth in terms of change in plant height and stem circumference, leaves' stomatal conductance, and chlorophyll content were not significantly different between the three groups during the duration of the study. The significant drop in photosynthesis was observed one week before physical changes appeared. This suggests the promising utilisation of photosynthesis activity as a signal for detecting RPW infestation at the early stage of attacks, which could be useful for integration in integrated pest management (IPM).
    Matched MeSH terms: Plant Leaves
  13. Therapeutic promises of ginkgolide A: A literature-based review
    Sarkar C, Quispe C, Jamaddar S, Hossain R, Ray P, Mondal M, et al.
    Biomed Pharmacother, 2020 Dec;132:110908.
    PMID: 33254431 DOI: 10.1016/j.biopha.2020.110908
    Ginkgolide A is a highly active platelet activating factor antagonist cage molecule which was isolated from the leaves of the Ginkgo biloba L. It is known for its inflammatory and immunological potentials. This review aims to sketch a current scenario on its therapeutic activities on the basis of scientific reports in the databases. A total 30 articles included in this review suggests that ginkgolide A has many important biological activities, including anti-inflammatory, anticancer, anxiolytic-like, anti-atherosclerosis and anti-atherombosis, neuro- and hepatoprotective effects. There is a lack of its toxicological (e.g. toxicity, cytotoxicity, genotoxicity and mutagenitcity) profile. In conclusion, ginkgolide A may be one of the potential therapeutic lead compounds, especially for the treatment of cardiovascular, hepatological, and neurological diseases and disorders. More studies are necessary on this hopeful therapeutic agent.
    Matched MeSH terms: Plant Leaves
  14. Fulltext Field demonstration of irradiated sodium alginate as tea production booster
    Hossain MA, Islam JMM, Hoque MM, Nahar S, Khan MA
    Heliyon, 2021 Jan;7(1):e05881.
    PMID: 33458447 DOI: 10.1016/j.heliyon.2020.e05881
    Sodium alginate oligomers were tested for tea plant growth promoter and anti-fungal agent in this experiment. Sodium alginate solutions were irradiated by Co-60 gamma radiation with different radiation doses to produce the oligomers. Irradiated solutions were then diluted into 150, 300 and 500 ppm prior to foliar application. Solutions were applied through foliar spraying at 7 days interval and the best response of tea plants in terms of various attributes were recorded. Tea buds were collected in 10 days of interval and the growth attributes like- total number of buds, fresh weight of buds, average leaf area and weight per bud, weight of made tea etc. were calculated. The experiment was continued up to 12 weeks and the attributes were averaged to get results per plucking. 12 kGy radiation doses along with 300ppm solution showed the best results and about 36% increase in productivity was found based on the fresh weight of buds. Total fungal count in tea leaves was also found to be reduced greatly. Based on the present study, irradiated sodium alginate could be used as safe and environmentally friendly agent to increase tea production.
    Matched MeSH terms: Plant Leaves
  15. Fulltext Microbiological and physical properties of pennywort (Centella asiatica) leaves using pulsed light technology
    Siti Zaharah, R., Noranizan, M., Son, R., Roselina, K., Yusof, N. L., Koh, P. C., et al.
    International Food Research Journal, 2020;27(1):16-27.
    MyJurnal
    Pennywort (Centella asiatica) is a herbaceous vegetable commonly consumed raw as ‘ulam’ or salad. Consumption of raw leafy green vegetables is one of the pathogenic mechanisms that could cause foodborne outbreaks. The aim of the present work was therefore to investigate the effect of pulsed light (PL) treatment at fluences of 1.5, 4.2, 6.9, 9.6, and 12.3 J/cm² on the microbiological and physical quality of pennywort stored at 4 ± 1°C. Escherichia coli (E. coli) were inoculated onto the pennywort leaves before being exposed to PL and viewed using scanning electron microscopy (SEM). PL fluences of 6.9, 9.6, and 12.3 J/cm² significantly reduced the microbial count; however, the highest inactivation was obtained by using fluences of 9.6 and 12.3 J/cm². The color of pennywort was not significantly affected by PL treatment applied at lower fluences of 1.5, 4.2, and 6.9 J/cm²; however, at higher fluence, 9.6 and 12.3 J/cm², the color was affected. PL at 1.5, 4.2, 6.9, and 9.6 J/cm² was able to retain the texture appearance of the leaves. To conclude, PL at 6.9 J/cm² showed the best fluence to reduce total aerobic mesophilic count while retaining the physical properties of pennywort leaves and extend the shelf life to about four days. The inactivation of E. coli population was significantly higher at PL fluence of 6.9 J/cm². It was observed that PL caused the destruction to the surface of E. coli’s cell membrane. The reductions of samples inoculated with E. coli were better than those achieved in native microbiota. Furthermore, the present work also demonstrated that PL treatment was able to reduce the microbial count on pennywort leaves.
    Matched MeSH terms: Plant Leaves
  16. Influence of irradiance on water relations and carbon flux during rooting of Shorea leprosula leafy stem cuttings
    Aminah H, McP Dick J, Grace J
    Tree Physiol, 1997 Jul;17(7):445-52.
    PMID: 14759836
    Single-node leafy stem cuttings of Shorea leprosula Miq. were subjected to a high, intermediate or low irradiance treatment for 16 weeks in an enclosed mist propagation system. Before rooting, maximum photosynthesis of the cuttings occurred at an irradiance of 400 micro mol m(-2) s(-1). Although none of the irradiance treatments affected the number of roots produced per cutting, the numbers of cuttings that formed roots were 50 and 30% in the high irradiance (diurnal range of 0-658 micro mol m(-2) s(-1)) and low irradiance (diurnal range of 0-98 micro mol m(-2) s(-1)) treatments, respectively, compared with 62% in the intermediate irradiance treatment (diurnal range of 0-360 micro mol m(-2) s(-1)). Low rooting frequency of cuttings in the high irradiance treatment was associated with water deficits (maximum leaf-to-air vapor pressure deficit (VPD) = 3.6 kPa), whereas cuttings in the low irradiance treatment had a low rooting frequency because they were below the light compensation point most of the time. In the intermediate irradiance treatment, cuttings withstood a daily maximum VPD of 1-2 kPa and recovered overnight from the previous day's deficit, as indicated by higher relative water content (RWC) and stomatal conductance (g(s)) in the morning than in the previous afternoon and evening. Higher RWC and g(s) of cuttings in all treatments on Days 14 and 21 compared with Day 8 probably indicated recovery from water deficit following severance and insertion of the cuttings in rooting medium. There were negative relationships between stem volume of cuttings and both number of cuttings that rooted and number of roots per cutting.
    Matched MeSH terms: Plant Leaves
  17. The process-based stand growth model Formix 3-Q applied in a GIS environment for growth and yield analysis in a tropical rain forest
    Ditzer T, Glauner R, Förster M, Köhler P, Huth A
    Tree Physiol, 2000 Mar;20(5_6):367-381.
    PMID: 12651452
    Managing tropical rain forests is difficult because few long-term field data on forest growth and the impact of harvesting disturbance are available. Growth models may provide a valuable tool for managers of tropical forests, particularly if applied to the extended forest areas of up to 100,000 ha that typically constitute the so-called forest management units (FMUs). We used a stand growth model in a geographic information system (GIS) environment to simulate tropical rain forest growth at the FMU level. We applied the process-based rain forest growth model Formix 3-Q to the 55,000 ha Deramakot Forest Reserve (DFR) in Sabah, Malaysia. The FMU was considered to be composed of single and independent small-scale stands differing in site conditions and forest structure. Field data, which were analyzed with a GIS, comprised a terrestrial forest inventory, site and soil analyses (water, nutrients, slope), the interpretation of aerial photographs of the present vegetation and topographic maps. Different stand types were determined based on a classification of site quality (three classes), slopes (four classes), and present forest structure (four strata). The effects of site quality on tree allometry (height-diameter curve, biomass allometry, leaf area) and growth (increment size) are incorporated into Formix 3-Q. We derived allometric relations and growth factors for different site conditions from the field data. Climax forest structure at the stand level was shown to depend strongly on site conditions. Simulated successional pattern and climax structure were compared with field observations. Based on the current management plan for the DFR, harvesting scenarios were simulated for stands on different sites. The effects of harvesting guidelines on forest structure and the implications for sustainable forest management at Deramakot were analyzed. Based on the stand types and GIS analysis, we also simulated undisturbed regeneration of the logged-over forest in the DFR at the FMU level. The simulations predict slow recovery rates, and regeneration times far exceeding 100 years.
    Matched MeSH terms: Plant Leaves
  18. A new form of tool use by orang-utans in Sabah, East Malaysia
    Rogers LJ, Kaplan G
    Folia Primatol., 1994;63(1):50-2.
    PMID: 7813972
    Matched MeSH terms: Plant Leaves
  19. Two new methyl chanofruticosinates from Kopsia flavida blume
    Husain K, Jantan I, Said IM, Aimi N, Takayama H
    J Asian Nat Prod Res, 2003 Mar;5(1):63-7.
    PMID: 12608641
    Two new indole alkaloids with the methyl chanofruticosinate skeletal system viz., methyl 3-oxo-12-methoxy-N1-decarbomethoxy-14,15-didehydrochanofruticosinate (1) and methyl 3-oxo-11,12-methylenedioxy-N-decarbomethoxy-14,15-didehydrochanofruticosinate (2), together with four known compounds, methyl 12-methoxy-N1-decarbomethoxychanofruticosinate, methyl 12-methoxychanofruticosinate, methyl 11,12-dimethoxychanofruticosinate and methyl 11,12-methylenedioxy-N1-decarbomethoxychanofruticosinate, were isolated in continuing studies on the leaves of Kopsia flavida Blume. The structures of the new indole alkaloids were assigned by NMR spectral data using various 2D-techniques.
    Matched MeSH terms: Plant Leaves
  20. Which nests to choose: collecting shed hairs from wild orang-utans
    Goossens B, Abdullah ZB, Sinyor JB, Ancrenaz M
    Folia Primatol., 2004 Jan-Feb;75(1):23-6.
    PMID: 14716150
    Matched MeSH terms: Plant Leaves
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links