A preliminary assessment of a simple and rapid electrochemical method was carried out to analyse imidacloprid (IMI) in water samples using cyclic voltammetry (CV) based on modified screen-printed gold electrode (SPGE). Self-assembled monolayer (SAM) was optimized using 11-mercaptoundecanoic acid (11-MUA) with several parameters such as scan rates, type of supporting electrolyte, and pH of the supporting electrolyte. The modified SPGE showed high suppressed current against the potential due to the formation of a monolayer on the electrode surface. Surface morphology of the electrode was analysed using Scanning Electron Microscopy (SEM) confirming that 11-MUA was present on the modified SPGE. The water samples were collected from GM Peladang, Kuala Terengganu and two locations at Universiti Malaysia Terengganu. Method detection limit was expressed as limit of detection (LOD) and limit of quantification (LOQ) for modified SPGE which were calculated at 3.784 and 12.613 mg/L in water samples, respectively. This study showed that the reduction peak current observed on the modified electrode was lower compared with oxidation peak current. Hence, gold is unsuitable for IMI detection.
There is lacking technology application in black pepper farming to automate daily routine activities in monitoring black pepper vines growth and nutrient need. With the revolution of Industry 4.0 (IR4.0), and tremendous improvement in the internet of things (IoT), the application of precision agriculture to pepper farming is a thing to consider for its benefit. This paper to explore the use of IoT to monitor fertilizer requirement for pepper vines using pH sensor. The pH sensor attached to Raspberry Pi 3 will be collecting the data and forwarding it to the cloud database for farmer reference and take decision based on data presented in form of a digital report from the database. The Python environment provides the space for coding in Raspberry Pi. SQL and PHP software is used to design the user interface and data management in the relational database management system. The information about pH provides a better understanding of how pH parameter affects the growth of pepper vines. The farmer will be able to access the information anywhere and anytime. Therefore, our proposed system will greatly help the pepper farmers in Sarawak in managing the usage of fertilizer as a way to minimize farm inputs, thus increase their profit.
This study aimed to determine the physicochemical properties of undulated surf clam (Paphia undulata) hydrolysate as affected by the degree of hydrolysis (DH). Three levels of DH of undulated surf clam hydrolysate were prepared which were DH 36.57% (without any enzymatic hydrolysis), DH 58.25% (0.5% Alcalase®; 5 min; pH 7.5; 60ºC) and DH 91.26% (1% Alcalase®; 30 min; pH 7.5; 60ºC). After protein hydrolysis, the undulated surf clam hydrolysates were centrifuged, and their supernatants were freeze-dried. This study found that the protein hydrolysate with lower DH (DH 36.57%) gave lower protein content and higher ash and fat contents compared to other samples (DH 58.25% and DH 91.26%). However, the carbohydrate content is similar in all samples (16.56-20.04%). This study also found that foaming properties (29.43-67.50%), emulsifying capacity (11.94-110.52%) and peptide solubility (57.61-94.08%) were affected by the DH. As DH increased, the emulsifying capacity decreased, while peptide solubility increased. While the foaming capacity increased with increasing DH until it reached a maximum value and level off afterwards. For colour parameters, although there were differences between L*, a* and b* values for all three samples, a fluctuating pattern was noted with DH. DH also did not affect the water-holding and oil-holding capacity of undulated surf clam hydrolysate. This study shows that certain physicochemical properties of undulated surf clam hydrolysate can be tailored by adjusting the degree of hydrolysis.
Dyes are aromatic organic compound which have an affinity towards the substrate to which they are being applied to. The presence of dyes in wastewater samples is not safe for human even at low level. The presence of dyes in wastewater which are discharged from textile industry must be analysed. Hence, a precise, fast, accurate, simple and inexpensive analytical method with low detection limit is needed for the determination of dyes in wastewaters. The differential pulse anodic stripping voltammetric (DPASV) technique using bare glassy carbon electrode (GCE) as a working electrode and phosphate buffer at pH 4.2 as a supporting electrolyte has been proposed for Reactive Black 5 (RB5) determination. Several experimental voltammetric parameters were being optimized for obtaining a maximum response before analytical validation of the proposed technique being carried out. The optimum parameters were initial potential (Ei) = +0.3 V, end potential (Ef) = +1.0 V, scan rate (v) = 0.04 V/s, accumulation time (tacc) = 50 s, accumulation potential (Eacc) = 0.4 V and pulse amplitude = 0.075 V. The well-defined anodic peak appeared at 0.77972 V. The response was linear from 0.5 to 1.25 mg/L (R2=0.9986) with LOD of 0.050 mg/L. The relative standard deviation (RSD) achieved were 0.08 %, 0.62 % and 0.50 %, respectively for three consecutive days. The % recovery range achieved was from 89.71 % to 111.15 %. It can be concluded that the proposed technique is precise, accurate, inexpensive, fast and has a potential to be an alternative analytical technique for RB5 analysis. The proposed method will in the future be tested for the amount of RB5 in the wastewater samples from textile industry.
Conyza sumatrensis (Retz.) E. H. Walker is an obnoxious weed, emerging as an invasive species globally. Seed germination biology of four populations of the species stemming from arid, semi-arid, temperate, and humid regions was determined in this study. Seed germination was recorded under six different environmental cues (i.e., light/dark periods, constant and alternating day and night temperatures, pH, salinity, and osmotic potential levels) in separate experiment for each cue. Populations were main factor, whereas levels of each environmental cue were considered as sub-factor. The impact of seed burial depths on seedling emergence was inferred in a greenhouse pot experiment. Seed germination was recorded daily and four germination indices, i.e., seed germination percentage, mean germination time, time to reach 50% germination, and mean daily germination were computed. Tested populations and levels of different environmental cues had significant impact on various seed germination indices. Overall, seeds stemming from arid and semi-arid regions had higher seed germination potential under stressful and benign environmental conditions compared to temperate and humid populations. Seed of all populations required a definite light period for germination and 12 hours alternating light and dark period resulted in the highest seed germination. Seed germination of all populations occurred under 5-30°C constant and all tested alternate day and night temperatures. However, the highest seed germination was recorded under 20°C. Seeds of arid and semi-arid populations exhibited higher germination under increased temperature, salinity and osmotic potential levels indicating that maternal environment strongly affected germination traits of the tested populations. The highest seed germination of the tested populations was noted under neutral pH, while higher and lower pH than neutral had negative impact on seed germination. Arid and semi-arid populations exhibited higher seed germination under increased pH compared to temperate and humid populations. Seed burial depth had a significant effect on the seedling emergence of all tested populations. An initial increase was noted in seedling emergence percentage with increasing soil depth. However, a steep decline was recorded after 2 cm seed burial depth. These results indicate that maternal environment strongly mediates germination traits of different populations. Lower emergence from >4 cm seed burial depth warrants that deep burial of seeds and subsequent zero or minimum soil disturbance could aid the management of the species in agricultural habitats. However, management strategies should be developed for other habitats to halt the spread of the species.
Herein, it was aimed to optimize, model, and forecast the biosorption of Congo Red onto biomass-derived biosorbent. Therefore, the waste-orange-peels were processed to fabricate biomass-derived carbon, which was activated by ZnCl2 and modified with cetyltrimethylammonium bromide. The physicochemical properties of the biosorbents were explored by scanning electron microscopy and N2 adsorption/desorption isotherms. The effects of pH, initial dye concentration, temperature, and contact duration on the biosorption capacity were investigated and optimized by batch experimental process, followed by the kinetics, equilibrium, and thermodynamics of biosorption were modeled. Furthermore, various artificial neural network (ANN) architectures were applied to experimental data to optimize the ANN model. The kinetic modeling of the biosorption offered that biosorption was in accordance both with the pseudo-second-order and saturation-type kinetic model, and the monolayer biosorption capacity was calculated as 666.67 mg g-1 at 25 °C according to Langmuir isotherm model. According to equilibrium modeling, the Freundlich isotherm model was better fitted to the experimental data than the Langmuir isotherm model. Moreover, the thermodynamic modeling revealed biosorption took place spontaneously as an exothermic process. The findings revealed that the best ANN architecture trained with trainlm as the backpropagation algorithm, with tansig-purelin transfer functions, and 14 neurons in the single hidden layer with the highest coefficient of determination (R2 = 0.9996) and the lowest mean-squared-error (MSE = 0.0002). The well-agreement between the experimental and ANN-forecasted data demonstrated that the optimized ANN model can predict the behavior of the anionic dye biosorption onto biomass-derived modified carbon materials under various operation conditions.
Adsorption capacity of an agricultural waste, palm-tree fruit stones (date stones), for phenolic compounds such as phenol (Ph) and p-nitro phenol (PNPh) at different temperatures was investigated. The characteristics of such waste biomass were determined and found to have a surface area and iodine number of 495.71 m2/g and 475.88 mg/g, respectively. The effects of pH (2-12), adsorbent dose (0.6-0.8 g/L) and contact time (0-150 min) on the adsorptive removal process were studied. Maximum removal percentages of 89.95% and 92.11% were achieved for Ph and PNPh, respectively. Experimental equilibrium data for adsorption of both components were analyzed by the Langmuir, Freundlich and Tempkin isotherm models. The results show that the best fit was achieved with the Langmuir isotherm equation with maximum adsorption capacities of 132.37 and 161.44 mg/g for Ph and PNPh, respectively. The kinetic data were fitted to pseudo-first order, pseudo-second order and intraparticle diffusion models, and was found to follow closely the pseudo-second order model for both components. The calculated thermodynamic parameters, namely ΔG, ΔH, and ΔS showed that adsorption of Ph and PNPh was spontaneous and endothermic under examined conditions.
The surface activity of some non-steroidal anti-inflammatory agents like ibuprofen was investigated extensively. This fact has attracted the researchers to extend this behavior to other agents like piroxicam. Piroxicam molecules are expected to orient at the interface of oil and aqueous phase. The aim of this study was, firstly, to assess the surface and interfacial tension behaviour of newly synthesised palm oil esters and various pH phosphate buffers. Furthermore, the surface and interfacial tension activity of piroxicam was studied. All the measurements of surface and interfacial tension were made using the tensiometer. The study revealed that piroxicam has no effect on surface tension values of all pH phosphate buffers and palm oil esters. Similarly, various concentrations of piroxicam did not affect the interfacial tensions between the oil phase and the buffer phases. Accordingly, the interfacial tension values of all mixtures of oil and phosphate buffers were considerably high which indicates the immiscibility. It could be concluded that piroxicam has no surface activity. Additionally, there is no surface pressure activity of piroxicam at the interface of plam oil esters and phosphate buffers in the presence of Tweens and Spans.
The Cr(III) sorption experiments onto Kappaphycus alvarezii waste biomass were conducted at different pH values (2-6) under the conditions of initial metal concentration of 10-50 mg/L and the chemical compositions of Cr-Cu and Cr-Cd. The Cr(III) sorption capacities were slightly dependent on pH, and the maximum sorption capacity was 0.86 mg/g at pH 3. The sorption capacities increased with increase in the initial metal concentration, whereas it was suppressed by the presence of Cu(II) and Cd(III) in the solution. The Cr(III) sorption equilibrium was evaluated using Langmuir, Freundlich and BET isotherms. The sorption mechanisms were characterised using scanning electron microscopy and Fourier transform infrared spectroscopy. The main mechanisms were ion exchange coupled with a complexation mechanism. Kappaphycus alvarezii waste biomass represents a potential for Cr(III) ion removal from aqueous solution.
Discarded cigarette butts (DCB) waste occurs worldwide, pollutes landscapes, is unsightly, and results in added debris removal costs. There is, therefore, a great deal of current interest in making use of DCBs in beneficial ways. Despite evidence that DCBs are harmful to water fleas (Daphnia magna), which breed in aquatic environments as do mosquito larvae, their impact on dengue vectors is unknown. We examined whether Aedes albopictus alters its ovipositional responses, larval eclosion, and development in response to presence of DCBs in its habitats. We found oviposition activity in DCB-treated water similar to that of control water and that ovipositional activity in DCB solutions steadily increased over time as those solutions aged to 10 days. Larval eclosion was initially suppressed on day 1 in DCB solution, but increased thereafter to levels similar to control larval eclosion rates. The DCB-water solutions produced significantly higher mortality in both 1st and 2nd instars over control larvae for several days after initial exposure. Mortality rates decreased sharply 3 to 5 days postexposure as DCBs continued to decompose. We found increased survival rates during late development, but daily input of fresh DCBs prevented most young larvae from completing development. Taken together, these observations suggest that decomposing did not deter gravid Ae. albopictus females from ovipositing in treated containers and that DCB solutions had larvicidal effects on early instars. Our results are discussed in the context of DCB use to control container-breeding Ae. albopictus, a competent dengue vector in Asia and other parts of the world.
A study has been carried out to define the effect of drastic temperature changes on the performance of lab-scale hollow-fibre MBR in treating municipal wastewater at a flux of 10 L m(-2) h(-1) (LMH). The objectives of the study were to estimate the activated sludge properties, the removal efficiencies of COD and NH(3)-N and the membrane fouling tendency under critical conditions of drastic temperature changes (23, 33, 42 & 33 °C) and MLSS concentration ranged between 6,382 and 8,680 mg/L. The study exhibited that the biomass reduction, the low sludge settleability and the supernatant turbidity were results of temperature increase. The temperature increase led to increase in SMP carbohydrate and protein, and to decrease in EPS carbohydrate and protein. The BRE of COD dropped from 80% at 23 °C to 47% at 42 °C, while the FRE was relatively constant at about 90%. Both removal efficiencies of NH(3)-N trended from about 100% at 33 °C to less than 50% at 42 °C. TMP and BWP ascended critically with temperature increase up to 336 and 304 mbar respectively by the end of the experiment. The values of suspended solids (SS) and the turbidity in the final effluent were negligible. The DO in the mixed liquor was varying with temperature change, while the pH was within the range of 6.7-8.3.
The sensing responses in aqueous solution of an open-gated pH sensor fabricated on an AlGaN/GaN high-electron-mobility-transistor (HEMT) structure are investigated. Under air-exposed ambient conditions, the open-gated undoped AlGaN/GaN HEMT only shows the presence of a linear current region. This seems to show that very low Fermi level pinning by surface states exists in the undoped AlGaN/GaN sample. In aqueous solution, typical current-voltage (I-V) characteristics with reasonably good gate controllability are observed, showing that the potential of the AlGaN surface at the open-gated area is effectively controlled via aqueous solution by the Ag/AgCl gate electrode. The open-gated undoped AlGaN/GaN HEMT structure is capable of distinguishing pH level in aqueous electrolytes and exhibits linear sensitivity, where high sensitivity of 1.9 mA/pH or 3.88 mA/mm/pH at drain-source voltage, V(DS) = 5 V is obtained. Due to the large leakage current where it increases with the negative gate voltage, Nernstian like sensitivity cannot be determined as commonly reported in the literature. This large leakage current may be caused by the technical factors rather than any characteristics of the devices. Surprisingly, although there are some imperfections in the device preparation and measurement, the fabricated devices work very well in distinguishing the pH levels. Suppression of current leakage by improving the device preparation is likely needed to improve the device performance. The fabricated device is expected to be suitable for pH sensing applications.
A study on diversity and distribution of fish communities and water qualities were carried out from January 2009 to December 2010 to cover monsoon and non-monsoon at Kuantan estuary, Pahang, Malaysia. A total of 19 species of primary marine fish belong to 12 families were recorded. Out of 311 individuals the fish fauna was dominated by Ariidae followed by Lutjanidae and Lactaridae. As such Ariidae contributes 50% of the fish caught in the study area and its diversity index (H') was 0.97. A The Ariidae family consist of four (4) species; Arius maculatus, Arius sumatranus, Arius tenuispinis and Arius thalassinus. The Ariidae family can be found in all stations as they are euryhaline (highly tolerant to salinity) and this fish family are known to be a hardy estuarine catfish. Among all species in family Ariidae, Arius thalassinus was the most dominant (23%) among all species. As such collected species showed highest species diversity (0.34) followed by Arius tenuispinis (0.25) compared to other species. Arius tenuispinis alone contributed 11.90% among the samples caught from all stations. The fishes were caught and recorded highest in September-December. Pseudorhombus quinque ocellatus, Nibea soldado, Sardinella fimbriata, Toxotes jaculatrix, Dasyatis ushiei, Setipinna taty were the least dominant in the Kuantan estuary with 9.33% of total abundance. Physico-temperatures, such as temperature (22.03-30 degrees C), Conductivity (10.342.43 mS cm(-1)), TDS (0.06-26.34 mg L(-1)), salinity (0.05-29.09 ppt), DO (6.37-8.38 mg L(-1)), pH (4.97-8.03), Chl a (0.01-1.33 microg L(-1)), nitrite (0.01-0.08 mg L(-1)), nitrate (0.60-0.88 mg L(-1)), phosphate (0.24-0.40 mg L(-1)). Nevertheless, the study envisages that the water quality and fish diversity are still conducive in the Kuantan estuary. The fish diversity of Pahang estuary was high monsoon compared to non-monsoons. The station 4 (LKIM fishing boat jetty and adjacent Hospital Kuantan) is the most polluted area due to the presence of several outskirts could be alarming for the sustainable development of fish and other aquatic organisms in Kuantan estuary in the long run.
The present study was conducted to evaluate the antioxidant properties of wheat and rice flours under simulated gastrointestinal pH condition. After subjecting the wheat and rice flour slurries to simulated gastrointestinal pH condition, both slurries were centrifuged to obtain the crude phenolic extracts for further analyses. Extraction yield, total contents of phenolic and flavonoids were determined as such (untreated) and under simulated gastrointestinal pH condition (treated). 1,1-diphenyl-2-picrylhydrazyl radical (DPPH(•)) scavenging activity, 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) radical cation (ABTS(•+)) scavenging activity, ferric reducing antioxidant power (FRAP), beta-carotene bleaching (BCB) and iron chelating activity assays were employed for the determination of antioxidant activity of the tested samples. In almost all of the assays performed, significant improvements in antioxidant properties (p < 0.05) were observed in both flours after treatment, suggesting that wheat and rice flours contain considerably heavy amounts of bound phenolics, and that their antioxidant properties might be improved under gastrointestinal digestive conditions.
Influences of river hydrodynamic behaviours on hydrochemistry (salinity, pH, dissolved oxygen saturations and dissolved phosphorus) were evaluated through high spatial and temporal resolution study of a sandbar-regulated coastal river. River hydrodynamic during sandbar-closed event was characterized by minor dependency on tidal fluctuations, very gradual increase of water level and continual low flow velocity. These hydrodynamic behaviours established a hydrochemistry equilibrium, in which water properties generally were characterized by virtual absence of horizontal gradients while vertical stratifications were significant. In addition, the river was in high trophic status as algae blooms were visible. Conversely, river hydrodynamic in sandbar-opened event was tidal-controlled and showed higher flow velocity. Horizontal gradients of water properties became significant while vertically more homogenised and with lower trophic status. In essence, this study reveals that estuarine sandbar directly regulates river hydrodynamic behaviours which in turn influences river hydrochemistry.
Wood sawdust was converted into a high-quality activated carbon (WSAC) via microwave-induced K(2)CO(3) activation. The operational variables including chemical impregnation ratio, microwave power and irradiation time on the carbon yield and adsorption capability were identified. The surface physical characteristics of WSAC were examined by pore structural analysis, scanning electron microscopy and nitrogen adsorption isotherms. The adsorptive behavior of WSAC was quantified using methylene blue as model dye compound. The best conditions resulted in activated carbon with a monolayer adsorption capacity of 423.17 mg/g and carbon yield of 80.75%. The BET surface area, Langmuir surface area and total pore volume were corresponded to 1496.05 m(2)/g, 2245.53 m(2)/g and 0.864 cm(3)/g, respectively. The findings support the potential to prepare high surface area and mesoporous activated carbon from wood sawdust by microwave assisted chemical activation.
An artificial neural network (ANN) model was developed to simulate the biodegradation of herbicide glyphosate [2-(Phosphonomethylamino) acetic acid] in a solution with varying parameters pH, inoculum size and initial glyphosate concentration. The predictive ability of ANN model was also compared with Monod model. The result showed that ANN model was able to accurately predict the experimental results. A low ratio of self-inhibition and half saturation constants of Haldane equations (< 8) exhibited the inhibitory effect of glyphosate on bacteria growth. The value of K(i)/K(s) increased when the mixed inoculum size was increased from 10(4) to 10(6) bacteria/mL. It was found that the percentage of glyphosate degradation reached a maximum value of 99% at an optimum pH 6-7 while for pH values higher than 9 or lower than 4, no degradation was observed.
Food manufacturers are interested in developing emulsion-based products into nutritional foods by using beneficial oils, such as fish oil and virgin coconut oil (VCO). In this study, the physicochemical properties of a VCO oil-in-water emulsion was investigated and compared to other commercial oil-in-water emulsion products (C1, C2, C3, and C4). C3 exhibited the smallest droplet size of 3.25 µm. The pH for the emulsion samples ranged from 2.52 to 4.38 and thus were categorised as acidic. In a texture analysis, C2 was described as the most firm, very adhesive and cohesive, as well as having high compressibility properties. From a rheological viewpoint, all the emulsion samples exhibited non-Newtonian behaviour, which manifested as a shear-thinning property. The G'G'' crossover illustrated by the VCO emulsion in the amplitude sweep graph but not the other commercial samples illustrated that the VCO emulsion had a better mouthfeel. In this context, the VCO emulsion yielded the highest zeta potential (64.86 mV), which was attributed to its strong repulsive forces, leading to a good dispersion system. C2 comprised the highest percentage of fat among all emulsion samples, followed by the VCO emulsion, with 18.44% and 6.59%, respectively.
Assessment of transit through the gastrointestinal tract provides useful information regarding gut physiology and patho-physiology. Although several methods are available, each has distinct advantages and limitations. Recently, an ingestible wire-less motility capsule (WMC), similar to capsule video endoscopy, has become available that offers a less-invasive, standardized, radiation-free and office-based test. The capsule has 3 sensors for measurement of pH, pressure and temperature, and collec-tively the information provided by these sensors is used to measure gastric emptying time, small bowel transit time, colonic transit time and whole gut transit time. Current approved indications for the test include the evaluation of gastric emptying in gastroparesis, colonic transit in constipation and evaluation of generalised dysmotility. Rare capsule retention and malfunc-tion are known limitations and some patients may experience difficulty with swallowing the capsule. The use of WMC has been validated for the assessment of gastrointestinal transit. The normal range for transit time includes the following: gastric empty-ing (2-5 hours), small bowel transit (2-6 hours), colonic transit (10-59 hours) and whole gut transit (10-73 hours). Besides avoiding the use of multiple endoscopic, radiologic and functional gastrointestinal tests, WMC can provide new diagnoses, leads to a change in management decision and help to direct further focused work-ups in patients with suspected disordered motility. In conclusion, WMC represents a significant advance in the assessment of segmental and whole gut transit and mo-tility, and could prove to be an indispensable diagnostic tool for gastrointestinal physicians worldwide.
This alkaloid automated removal machine was developed at Instrumentation Laboratory, Universiti Sultan Zainal Abidin Malaysia that purposely for removing the alkaloid toxicity from Dioscorea hispida (DH) tuber. It is a poisonous plant where scientific study has shown that its tubers contain toxic alkaloid constituents, dioscorine. The tubers can only be consumed after it poisonous is removed. In this experiment, the tubers are needed to blend as powder form before inserting into machine basket. The user is need to push the START button on machine controller for switching the water pump ON by then creating turbulence wave of water in machine tank. The water will stop automatically by triggering the outlet solenoid valve. The powders of tubers are washed for 10 minutes while 1 liter of contaminated water due toxin mixture is flowing out. At this time, the controller will automatically triggered inlet solenoid valve and the new water will flow in machine tank until achieve the desire level that which determined by ultra sonic sensor. This process will repeated for 7 h and the positive result is achieved and shows it significant according to the several parameters of biological character ofpH, temperature, dissolve oxygen, turbidity, conductivity and fish survival rate or time. From that parameter, it also shows the positive result which is near or same with control water and assuming was made that the toxin is fully removed when the pH of DH powder is near with control water. For control water, the pH is about 5.3 while water from this experiment process is 6.0 and before run the machine the pH of contaminated water is about 3.8 which are too acid. This automated machine can save time for removing toxicity from DH compared with a traditional method while less observation of the user.