Displaying publications 441 - 460 of 529 in total

Abstract:
Sort:
  1. Venkatraman G, Giribabu N, Mohan PS, Muttiah B, Govindarajan VK, Alagiri M, et al.
    Chemosphere, 2024 Mar;351:141227.
    PMID: 38253087 DOI: 10.1016/j.chemosphere.2024.141227
    Polycyclic Aromatic Hydrocarbons (PAHs) profoundly impact public and environmental health. Gaining a comprehensive understanding of their intricate functions, exposure pathways, and potential health implications is imperative to implement remedial strategies and legislation effectively. This review seeks to explore PAH mobility, direct exposure pathways, and cutting-edge bioremediation technologies essential for combating the pervasive contamination of environments by PAHs, thereby expanding our foundational knowledge. PAHs, characterised by their toxicity and possession of two or more aromatic rings, exhibit diverse configurations. Their lipophilicity and remarkable persistence contribute to their widespread prevalence as hazardous environmental contaminants and byproducts. Primary sources of PAHs include contaminated food, water, and soil, which enter the human body through inhalation, ingestion, and dermal exposure. While short-term consequences encompass eye irritation, nausea, and vomiting, long-term exposure poses risks of kidney and liver damage, difficulty breathing, and asthma-like symptoms. Notably, cities with elevated PAH levels may witness exacerbation of bronchial asthma and chronic obstructive pulmonary disease (COPD). Bioremediation techniques utilising microorganisms emerge as a promising avenue to mitigate PAH-related health risks by facilitating the breakdown of these compounds in polluted environments. Furthermore, this review delves into the global concern of antimicrobial resistance associated with PAHs, highlighting its implications. The environmental effects and applications of genetically altered microbes in addressing this challenge warrant further exploration, emphasising the dynamic nature of ongoing research in this field.
  2. Khan MUA, Al-Thebaiti MA, Hashmi MU, Aftab S, Abd Razak SI, Abu Hassan S, et al.
    Materials (Basel), 2020 Feb 21;13(4).
    PMID: 32098139 DOI: 10.3390/ma13040971
    Advancement and development in bone tissue engineering, particularly that of composite scaffolds, are of great importance for bone tissue engineering. We have synthesized polymeric matrix using biopolymer (β-glucan), acrylic acid, and nano-hydroxyapatite through free radical polymerization method. Bioactive nanocomposite scaffolds (BNSs) were fabricated using the freeze-drying method and Ag was coated by the dip-coating method. The scaffolds have been characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction analysis (XRD) to investigate their functional groups, surface morphology, and phase analysis, respectively. The pore size and porosity of all BNS samples were found to be dependent on silver concentration. Mechanical testing of all BNS samples have substantial compressive strength in dry form that is closer to cancellous bone. The samples of BNS showed substantial antibacterial effect against DH5 alpha E. coli. The biological studies conducted using the MC3T3-E1 cell line via neutral red dye assay on the scaffolds have found to be biocompatible and non-cytotoxic. These bioactive scaffolds can bring numerous applications for bone tissue repairs and regenerations.
  3. Faizal AM, Elias MH, Jin NM, Abu MA, Syafruddin SE, Zainuddin AA, et al.
    Front Endocrinol (Lausanne), 2024;15:1274376.
    PMID: 38524634 DOI: 10.3389/fendo.2024.1274376
    The leading indicator for successful outcomes in in-vitro fertilization (IVF) is the quality of gametes in oocytes and sperm. Thus, advanced research aims to highlight the parameter in assessing these qualities - DNA fragmentation in sperm and oocyte development capacity (ODC) via evaluation of microenvironments involving its maturation process. Regarding oocytes, most evidence reveals the role of cumulus cells as non-invasive methods in assessing their development competency, mainly via gene expression evaluation. Our review aims to consolidate the evidence of GDF-9 derivatives, the HAS2, GREM1, and PTGS2 gene expression in cumulus cells used as ODC markers in relevant publications and tailored to current IVF outcomes. In addition to that, we also added the bioinformatic analysis in our review to strengthen the evidence aiming for a better understanding of the pathways and cluster of the genes of interest - HAS2, GREM1, and PTGS2 in cumulus cell level. Otherwise, the current non-invasive method can be used in exploring various causes of infertility that may affect these gene expressions at the cumulus cell level. Nevertheless, this method can also be used in assessing the ODC in various cohorts of women or as an improvement of markers following targeted tools or procedures by evaluating the advancement of these gene expressions following the targeted intervention.
  4. Aslam Khan MU, Al-Arjan WS, Binkadem MS, Mehboob H, Haider A, Raza MA, et al.
    Nanomaterials (Basel), 2021 May 17;11(5).
    PMID: 34067844 DOI: 10.3390/nano11051319
    Bone tissue engineering is an advanced field for treatment of fractured bones to restore/regulate biological functions. Biopolymeric/bioceramic-based hybrid nanocomposite scaffolds are potential biomaterials for bone tissue because of biodegradable and biocompatible characteristics. We report synthesis of nanocomposite based on acrylic acid (AAc)/guar gum (GG), nano-hydroxyapatite (HAp NPs), titanium nanoparticles (TiO2 NPs), and optimum graphene oxide (GO) amount via free radical polymerization method. Porous scaffolds were fabricated through freeze-drying technique and coated with silver sulphadiazine. Different techniques were used to investigate functional group, crystal structural properties, morphology/elemental properties, porosity, and mechanical properties of fabricated scaffolds. Results show that increasing amount of TiO2 in combination with optimized GO has improved physicochemical and microstructural properties, mechanical properties (compressive strength (2.96 to 13.31 MPa) and Young's modulus (39.56 to 300.81 MPa)), and porous properties (pore size (256.11 to 107.42 μm) and porosity (79.97 to 44.32%)). After 150 min, silver sulfadiazine release was found to be ~94.1%. In vitro assay of scaffolds also exhibited promising results against mouse pre-osteoblast (MC3T3-E1) cell lines. Hence, these fabricated scaffolds would be potential biomaterials for bone tissue engineering in biomedical engineering.
  5. Aziz SAA, Mazlan SA, Ubaidillah U, Mohamad N, Choi SB, Che Aziz MA, et al.
    Int J Mol Sci, 2020 Nov 27;21(23).
    PMID: 33260840 DOI: 10.3390/ijms21239007
    Engineering rubber composites have been widely used as main components in many fields including vehicle engineering and biomedical applications. However, when a rubber composite surface area is exposed to heat or sunlight and over a long-term accelerated exposure and lifecycle of test, the rubber becomes hard, thus influencing the mechanical and rheological behavior of the materials. Therefore, in this study, the deterioration of rheological characteristics particularly the phase shift angle (δ) of silicone rubber (SR) based magnetorheological elastomer (MRE) is investigated under the effect of thermal aging. SR-MRE with 60 wt% of CIPs is fabricated and subjected to a continuous temperature of 100 °C for 72 h. The characterization of SR-MRE before and after thermal aging related to hardness, micrograph, and rheological properties are characterized using low vacuum scanning electron microscopy (LV-SEM) and a rheometer, respectively. The results demonstrated that the morphological analysis has a rough surface and more voids occurred after the thermal aging. The hardness and the weight of the SR-MRE before and after thermal aging were slightly different. Nonetheless, the thermo-rheological results showed that the stress-strain behavior have changed the phase-shift angle (δ) of SR-MRE particularly at a high strain. Moreover, the complex mechanism of SR-MRE before and after thermal aging can be observed through the changes of the 'in-rubber structure' under rheological properties. Finally, the relationship between the phase-shift angle (δ) and the in-rubber structure due to thermal aging are discussed thoroughly which led to a better understanding of the thermo-rheological behavior of SR-MRE.
  6. Hussin MSF, Mohd Serah A, Azlan KA, Abdullah HZ, Idris MI, Ghazali I, et al.
    Polymers (Basel), 2021 Feb 22;13(4).
    PMID: 33671617 DOI: 10.3390/polym13040647
    Collecting information from previous investigations and expressing it in a scientometrics study can be a priceless guide to getting a complete overview of a specific research area. The aim of this study is to explore the interrelated connection between alginate, gelatine, and hydroxyapatite within the scope of bone tissue and scaffold. A review of traditional literature with data mining procedures using bibliometric analyses was considered to identify the evolution of the selected research area between 2009 and 2019. Bibliometric methods and knowledge visualization technologies were implemented to investigate diverse publications based on the following indicators: year of publication, document type, language, country, institution, author, journal, keyword, and number of citations. An analysis using a bibliometric study found that 7446 papers were located with the keywords "bone tissue" and "scaffold", and 1767 (alginate), 185 (gelatine), 5658 (hydroxyapatite) papers with those specific sub keywords. The number of publications that relate to "tissue engineering" and bone more than doubled between 2009 (1352) and 2019 (2839). China, the United States and India are the most productive countries, while Sichuan University and the Chinese Academy of Science from China are the most important institutions related to bone tissue scaffold. Materials Science and Engineering C is the most productive journal, followed by the Journal of Biomedical Materials Research Part A. This paper is a starting point, providing the first bibliometric analysis study of bone tissue and scaffold considering alginate, gelatine and hydroxyapatite. A bibliometric analysis would greatly assist in giving a scientific insight to support desired future research work, not only associated with bone tissue engineering applications. It is expected that the analysis of alginate, gelatine and hydroxyapatite in terms of 3D bioprinting, clinical outcomes, scaffold architecture, and the regenerative medicine approach will enhance the research into bone tissue engineering in the near future. Continued studies into these research fields are highly recommended.
  7. Latifah SY, Armania N, Tze TH, Azhar Y, Nordiana AH, Norazalina S, et al.
    Nutr J, 2010 Mar 26;9:16.
    PMID: 20346115 DOI: 10.1186/1475-2891-9-16
    Chemoprevention has become an important area in cancer research due to the failure of current therapeutic modalities. Epidemiological and preclinical studies have demonstrated that nutrition plays a vital role in the etiology of cancer. This study was conducted to determine the chemopreventive effects of germinated brown rice (GBR) in rats induced with colon cancer. GBR is brown rice that has been claimed to be richer in nutrients compared to the common white rice. The male Sprague Dawley rats (6 weeks of age) were randomly divided into 5 groups: (G1) positive control (with colon cancer, unfed with GBR), (G2) fed with 2.5 g/kg of GBR (GBR (g)/weight of rat (kg)), (G3) fed with 5 g/kg of GBR, (G4) fed with 10 g/kg of GBR and (G5) negative control (without colon cancer, unfed with GBR). GBR was administered orally once daily via gavage after injection of 15 mg/kg of body weight of azoxymethane (AOM) once a week for two weeks, intraperitonially. After 8 weeks of treatment, animals were sacrificed and colons were removed. Colonic aberrant crypt foci (ACF) were evaluated histopathologically. Total number of ACF and AC, and multicrypt of ACF, and the expression of beta-catenin and COX-2 reduced significantly (p < 0.05) in all the groups treated with GBR (G2, G3 and G4) compared to the control group (G1). Spearman rank correlation test showed significant positive linear relationship between total beta-catenin and COX-2 score (Spearman's rho = 0.616, p = 0.0001). It is demonstrated that GBR inhibits the development of total number of ACF and AC, and multicrypt of ACF, reduces the expression of beta-catenin and COX-2, and thus can be a promising dietary supplement in prevention of colon cancer.
  8. Kapitonova M, Gupalo S, Alyautdin R, Ibrahim IAA, Salim N, Ahmad A, et al.
    Avicenna J Phytomed, 2022;12(1):30-41.
    PMID: 35145893 DOI: 10.22038/AJP.2021.18113
    OBJECTIVE: Modern treatment of peptic ulcers includes antibacterial and gastroprotective medications. However, current anti-ulcer drugs possess severe side effects. Therefore, all attempts to find new effective medications free from side effects are justified. Though Berberis vulgaris is a medicinal plant commonly used for the treatment of numerous disorders, gastroprotective effect of its leaf extract was not investigated before.

    MATERIALS AND METHODS: Gastric ulcer was modelled in Sprague-Dawley rats after treatment with B. vulgaris leaf extract containing 0.07% of alkaloids, 0.48% of flavonoids and 8.05% of tanning substances, 10 or 50 mg of dry extract/kg, changes in the stomach mucosa were assessed semi-quantitatively, and the gastric wall was evaluated for prostaglandin E2 level using ELISA and assessed histologically by calculation of the lesion index.

    RESULTS: B. vulgaris leaf extract at the dose of 50 mg/kg reduced the macroscopic ulcer score and the microscopic lesion index, increased prostaglandin E2 concentration in the gastric wall significantly higher than atropine and B. vulgaris leaf extract 10 mg/kg.

    CONCLUSION: The gastroprotective effect of the high dose of B. vulgaris leaf extract may be due to stimulation of prostaglandin E2 secretion in the stomach, and anti-oxidative and anti-inflammatory properties of polyphenolic complex of flavonoids and tannins present in the leaves of this plant.

  9. Zaini N, Mohamad N, Mazlan SA, Abdul Aziz SA, Choi SB, Hapipi NM, et al.
    Materials (Basel), 2021 Dec 06;14(23).
    PMID: 34885641 DOI: 10.3390/ma14237484
    Common sensors in many applications are in the form of rigid devices that can react according to external stimuli. However, a magnetorheological plastomer (MRP) can offer a new type of sensing capability, as it is flexible in shape, soft, and responsive to an external magnetic field. In this study, graphite (Gr) particles are introduced into an MRP as an additive, to investigate the advantages of its electrical properties in MRPs, such as conductivity, which is absolutely required in a potential sensor. As a first step to achieve this, MRP samples containing carbonyl iron particles (CIPs) and various amounts of of Gr, from 0 to 10 wt.%, are prepared, and their magnetic-field-dependent electrical properties are experimentally evaluated. After the morphological aspect of Gr-MRP is characterized using environmental scanning electron microscopy (ESEM), the magnetic properties of MRP and Gr-MRP are evaluated via a vibrating sample magnetometer (VSM). The resistivities of the Gr-MRP samples are then tested under various applied magnetic flux densities, showing that the resistivity of Gr-MRP decreases with increasing of Gr content up to 10 wt.%. In addition, the electrical conductivity is tested using a test rig, showing that the conductivity increases as the amount of Gr additive increases, up to 10 wt.%. The conductivity of 10 wt.% Gr-MRP is found to be highest, at 178.06% higher than the Gr-MRP with 6 wt.%, for a magnetic flux density of 400 mT. It is observed that with the addition of Gr, the conductivity properties are improved with increases in the magnetic flux density, which could contribute to the potential usefulness of these materials as sensing detection devices.
  10. Algin S, Banik D, Rahman SA, Mahmud Tusher S, Tuj Johora F, Akter A, et al.
    Cureus, 2024 Apr;16(4):e57877.
    PMID: 38596207 DOI: 10.7759/cureus.57877
    Treatment of resistant obsessive-compulsive disorder (OCD) typically results in insufficient symptom alleviation, and even long-term medication often fails to have the intended effect. Ketamine is a potent non-competitive antagonist of the N-methyl-D-aspartate (NMDA) receptor. Studies have shown that low-dose ketamine infusion results in a considerable reduction in obsessive-compulsive symptoms and a rapid resolution of suicidal ideation. This is a case report on the effect of intravenous ketamine infusion on a patient with resistant OCD and severe suicidal ideation. Intravenous (IV) ketamine was given once a week over consecutive three weeks with necessary precautions. Psychometric tools such as the Yale-Brown Obsessive Compulsive Scale (Y-BOCS), the Clinical Global Impressions Scale (CGI-S), the Beck Scale for Suicidal Ideations (BSSI), and Depression Anxiety and Stress Scale 21 (DASS-21) were applied before and after infusions. Obsessive-compulsive symptoms and suicidal severity started to decrease rapidly after the first infusion. However, after a transient improvement, these symptoms again began to increase after a stressful incident on the second day of the first infusion. All the symptoms measured by validated rating scales showed continued improvement after the following two infusions. The improvement was sustained until discharge (one week after the last infusion) and subsequent follow-up in the sixth and 12th weeks. The role of ketamine in reducing suicidal thoughts and behavior is already established. Very few studies emphasized its effectiveness in improving severe/resistant obsessive-compulsive symptoms. This pioneering work may offer scope for similar research in the relevant field.
  11. Khor V, Sidhu S, Muhammad Afiq MFO, Pushpanathan M, Fahmy O, Khairul Asri MG, et al.
    Singapore Med J, 2024 Mar 01;65(Suppl 1):S35-S40.
    PMID: 35139632 DOI: 10.11622/smedj.2022008
  12. Adli Azizman MS, Azhari AW, Ibrahim N, Che Halin DS, Sepeai S, Ludin NA, et al.
    Heliyon, 2024 Apr 30;10(8):e29676.
    PMID: 38665575 DOI: 10.1016/j.heliyon.2024.e29676
    Significant progress has been made over the years to improve the stability and efficiency of rapidly evolving tin-based perovskite solar cells (PSCs). One powerful approach to enhance the performance of these PSCs is through compositional engineering techniques, specifically by incorporating a mixed cation system at the A-site and B-site structure of the tin perovskite. These approaches will pave the way for unlocking the full potential of tin-based PSCs. Therefore, in this study, a theoretical investigation of mixed A-cations (FA, MA, EA, Cs) with a tin-germanium-based PSC was presented. The crystal structure distortion and optoelectronic properties were estimated. SCAPS 1-D simulations were employed to predict the photovoltaic performance of the optimized tin-germanium material using different electron transport layers (ETLs), hole transport layers (HTLs), active layer thicknesses, and cell temperatures. Our findings reveal that EA0.5Cs0.5Sn0.5Ge0.5I3 has a nearly cubic structure (t = 0.99) and a theoretical bandgap within the maximum Shockley-Queisser limit (1.34 eV). The overall cell performance is also improved by optimizing the perovskite layer thickness to 1200 nm, and it exhibits remarkable stability as the temperature increases. The short-circuit current density (Jsc) remains consistent around 33.7 mA/cm2, and the open-circuit voltage (Voc) is well-maintained above 1 V by utilizing FTO as the conductive layer, ZnO as the ETL, Cu2O as the HTL, and Au as the metal back contact. This configuration also achieves a high fill factor ranging from 87 % to 88 %, with the highest power conversion efficiency (PCE) of 31.49 % at 293 K. This research contributes to the advancement of tin-germanium perovskite materials for a wide range of optoelectronic applications.
  13. Zaid SNA, Abdul Kadir A, Mohd Noor N, Ahmad B, Yusoff MSB, Ramli AS, et al.
    PLoS One, 2024;19(4):e0302237.
    PMID: 38630657 DOI: 10.1371/journal.pone.0302237
    INTRODUCTION: Healthcare workers play a crucial role in supporting COVID-19 vaccination as they are the most trusted source of information to the public population. Assessing the healthcare workers' hesitancy towards COVID-19 vaccination is pertinent, however, there are limited validated tools to measure their hesitancy on COVID-19 vaccines. This study aims to adapt and validate the first COVID-19 hesitancy scale among healthcare workers in Malaysia.

    MATERIALS AND METHODS: This study adapted and translated the Vaccine Hesitancy Scale (VHS) developed by the WHO SAGE Working Group. The scale underwent a sequential validation process, including back-back translation, content, face, and construct validity for Exploratory Factor Analysis (EFA) and Confirmatory Factor Analysis (CFA). The reliability was tested using internal consistency (Cronbach's alpha composite reliability (CR) and average variance extracted (AVE)).

    RESULTS: The data for EFA and CFA were completed by a separate sample of 125 and 300 HCWs, respectively. The EFA analysis of the C19-VHS-M scale was unidimensional with 10 items. A further CFA analysis revealed a uniform set of nine items with acceptable goodness fit indices (comparative fit index = 0.997, Tucker-Lewis index = 0.995, incremental fit index = 0.997, chi-squared/degree of freedom = 1.352, and root mean square error of approximation = 0.034). The Cronbach's alpha, CR and AVE results were 0.953, 0.95 and 0.70, respectively.

    CONCLUSIONS: The questionnaire was valid and reliable for use in the Malay language.

  14. Roney M, Singh G, Huq AKMM, Forid MS, Ishak WMBW, Rullah K, et al.
    Mol Biotechnol, 2024 Apr;66(4):696-706.
    PMID: 36752937 DOI: 10.1007/s12033-023-00667-5
    The infection produced by the SARS-CoV-2 virus remains a significant health crisis worldwide. The lack of specific medications for COVID-19 necessitates a concerted effort to find the much-desired therapies for this condition. The main protease (Mpro) of SARS-CoV-2 is a promising target, vital for virus replication and transcription. In this study, fifty pyrazole derivatives were tested for their pharmacokinetics and drugability, resulting in eight hit compounds. Subsequent molecular docking simulations on SARS-CoV-2 main protease afforded two lead compounds with strong affinity at the active site. Additionally, the molecular dynamics (MD) simulations of lead compounds (17 and 39), along with binding free energy calculations, were accomplished to validate the stability of the docked complexes and the binding poses achieved in docking experiments. Based on these findings, compound 17 and 39, with their favorable projected pharmacokinetics and pharmacological characteristics, are the proposed potential antiviral candidates which require further investigation to be used as anti-SARS-CoV-2 medication.
  15. Aqif M, Shah MUH, Khan R, Umar M, SajjadHaider, Razak SIA, et al.
    PMID: 39017873 DOI: 10.1007/s11356-024-34248-z
    The production of renewable materials from alternative sources is becoming increasingly important to reduce the detrimental environmental effects of their non-renewable counterparts and natural resources, while making them more economical and sustainable. Chemical surfactants, which are highly toxic and non-biodegradable, are used in a wide range of industrial and environmental applications harming humans, animals, plants, and other entities. Chemical surfactants can be substituted with biosurfactants (BS), which are produced by microorganisms like bacteria, fungi, and yeast. They have excellent emulsifying, foaming, and dispersing properties, as well as excellent biodegradability, lower toxicity, and the ability to remain stable under severe conditions, making them useful for a variety of industrial and environmental applications. Despite these advantages, BS derived from conventional resources and precursors (such as edible oils and carbohydrates) are expensive, limiting large-scale production of BS. In addition, the use of unconventional substrates such as agro-industrial wastes lowers the BS productivity and drives up production costs. However, overcoming the barriers to commercial-scale production is critical to the widespread adoption of these products. Overcoming these challenges would not only promote the use of environmentally friendly surfactants but also contribute to sustainable waste management and reduce dependence on non-renewable resources. This study explores the efficient use of wastes and other low-cost substrates to produce glycolipids BS, identifies efficient substrates for commercial production, and recommends strategies to improve productivity and use BS in environmental remediation.
  16. Alathari MJA, Al Mashhadany Y, Mokhtar MHH, Burham N, Bin Zan MSD, A Bakar AA, et al.
    Sensors (Basel), 2021 Dec 15;21(24).
    PMID: 34960456 DOI: 10.3390/s21248362
    Life was once normal before the first announcement of COVID-19's first case in Wuhan, China, and what was slowly spreading became an overnight worldwide pandemic. Ever since the virus spread at the end of 2019, it has been morphing and rapidly adapting to human nature changes which cause difficult conundrums in the efforts of fighting it. Thus, researchers were steered to investigate the virus in order to contain the outbreak considering its novelty and there being no known cure. In contribution to that, this paper extensively reviewed, compared, and analyzed two main points; SARS-CoV-2 virus transmission in humans and detection methods of COVID-19 in the human body. SARS-CoV-2 human exchange transmission methods reviewed four modes of transmission which are Respiratory Transmission, Fecal-Oral Transmission, Ocular transmission, and Vertical Transmission. The latter point particularly sheds light on the latest discoveries and advancements in the aim of COVID-19 diagnosis and detection of SARS-CoV-2 virus associated with this disease in the human body. The methods in this review paper were classified into two categories which are RNA-based detection including RT-PCR, LAMP, CRISPR, and NGS and secondly, biosensors detection including, electrochemical biosensors, electronic biosensors, piezoelectric biosensors, and optical biosensors.
  17. Taha BA, Al Mashhadany Y, Bachok NN, Ashrif A Bakar A, Hafiz Mokhtar MH, Dzulkefly Bin Zan MS, et al.
    Diagnostics (Basel), 2021 Jun 19;11(6).
    PMID: 34205401 DOI: 10.3390/diagnostics11061119
    The propagation of viruses has become a global threat as proven through the coronavirus disease (COVID-19) pandemic. Therefore, the quick detection of viral diseases and infections could be necessary. This study aims to develop a framework for virus diagnoses based on integrating photonics technology with artificial intelligence to enhance healthcare in public areas, marketplaces, hospitals, and airfields due to the distinct spectral signatures from lasers' effectiveness in the classification and monitoring of viruses. However, providing insights into the technical aspect also helps researchers identify the possibilities and difficulties in this field. The contents of this study were collected from six authoritative databases: Web of Science, IEEE Xplore, Science Direct, Scopus, PubMed Central, and Google Scholar. This review includes an analysis and summary of laser techniques to diagnose COVID-19 such as fluorescence methods, surface-enhanced Raman scattering, surface plasmon resonance, and integration of Raman scattering with SPR techniques. Finally, we select the best strategies that could potentially be the most effective methods of reducing epidemic spreading and improving healthcare in the environment.
  18. Yusof MZ, Zahaba M, Mohd Aris MS, Shafiee S', Abdul Hadi H, Maghpor MN, et al.
    Toxicol Ind Health, 2024 Aug 20.
    PMID: 39163360 DOI: 10.1177/07482337241273755
    This study aimed to estimate workers' occupational lifetime exposure to chrysotile and examine the respiratory symptoms and lung cancer risk. A total of 112 workers were interviewed about their occupational histories. Exposure modeling using information on the determinants of exposure was used to estimate chrysotile emissions. The cumulative lifetime exposure was then assessed for each worker. Respiratory symptoms were obtained using a validated questionnaire. Lung cancer mortality rate was also predicted using a model. Almost all the workers were male and young (mean age = 30 years, SD = 7). The estimated lifetime occupational chrysotile inhalation exposure ranged from 0.0001 to 0.0486 f/mL.years (median = 0.0018 f/mL.years, IQR = 0.486). A high prevalence of cough symptom (11.7%), and low estimated cancer risk (<1%) were reported. In conclusion, the lung cancer risk among our cohort of workers was at a low level because of lower cumulative lifetime occupational chrysotile exposure.
  19. Ghosh A, Karmaker KD, Hasan M, Rahman M, Shimu NJ, Islam MS, et al.
    Mar Pollut Bull, 2024 Sep 04;207:116897.
    PMID: 39236491 DOI: 10.1016/j.marpolbul.2024.116897
    The research, focusing on the analysis of nine trace elements, namely As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn, completely analyzed their quantities in both water and sediment inside the Rabnabad Channel. Samples were collected during the post-monsoon and analyzed by ICP-OES following acid digestion. The mean concentrations of elements in water and sediments are as follows: Fe > Mn > Pb > Cu > Ni > Zn > Cr > As>Cd, and Zn > Fe > Pb > Mn > As>Cu > Cr > Ni > Cd. To understand the state of ecological and human health risk, several indices were incorporated. Health risk assessment revealed that children posed higher risk than adults. PERI, TRI, and Igeo indices for water sediment indicate a significant ecological risk. Moreover, Mn and Pb exhibit elevated HPI values and contribute substantially to contamination factors. Correlation and PCA implicate both anthropogenic and geogenic sources, such as agricultural practices, coal-based power plants, and the Payra seaport, in the elevated concentrations of Cd, Cr, Mn, and Fe in both water and sediment samples.
  20. Guraya SS, Guraya SY, Rashid-Doubell F, Fredericks S, Harkin DW, Bin Mat Nor MZ, et al.
    Ann Med, 2024 Dec;56(1):2398202.
    PMID: 39263743 DOI: 10.1080/07853890.2024.2398202
    BACKGROUND: There has been an alarming surge in the usage of social networking sites (SNSs) by healthcare professionals (HCPs) without adherence to the principles of professionalism. The widespread use of SNSs in medical practices has been coupled with reports of breaches of professional behaviors. Despite the benefits of SNSs, skepticism prevails about a clearly defined role for SNSs within medicine based upon the core principles of professionalism. Thus, there is a need to understand the manifestations of professionalism in the digital context, classically known as e-professionalism. This study systematically examines HCPs' perceptions of e-professionalism to advance a thorough understanding of e-professionalism.

    METHODS: This concept analysis was performed using the principle-based approach of Penrod and Hupcey. In January 2023, we searched the databases of PubMed and ISI Web of Science for English-language articles specific to 'e-professionalism' in the medical field. The final selected research corpus of 63 articles was analyzed in this study.

    RESULTS: A comprehensive analysis of the selected articles highlighted that e-professionalism is an epistemologically mature and distinct concept by a standard definition. However, inconsistencies in conceptual meanings were reported due to varied interpretations despite digital literacy. The pragmatic utility showed a lack of sound methodological and philosophical paradigms. Perhaps the rapid technological advancements and manifestations have hampered linguistic maturity. However, logically, e-professionalism is perceived as an extension of conventional professionalism but with a focus on a distinct framework with a set of attributes to be digitally relevant.

    CONCLUSION: This study identifies a scarcity of research about the collective perspective of essential stakeholders, underpinning the need to further explore e-professionalism due to its emerging complex nature within the digital context. There is also a recognition that a framework is essential to guide future HCPs to yield a profound understanding and to provide remediation strategies in the rapidly advancing medical field in digital realm.

Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links