Buildings are among the largest consumers of energy. Part of the energy is wasted due to the habits of users and equipment conditions. A solution to this problem is efficient energy usage. To this end, an energy audit can be conducted to assess the energy efficiency. This study aims to analyze the energy usage of a primary school and identify the potential energy reductions and cost savings. A preliminary audit was conducted, and several energy conservation measures were proposed. The energy conservation measures, with reference to the MS1525:2007 standard, were modelled to identify the potential energy reduction and cost savings. It was found that the school's usage of electricity exceeded its need, incurring an excess expenditure of RM 2947.42. From the lighting system alone, it was found that there is a potential energy reduction of 5489.06 kWh, which gives a cost saving of RM 2282.52 via the improvement of lighting system design and its operating hours. Overall, it was found that there is a potential energy reduction and cost saving of 20.7% when the energy conservation measures are earnestly implemented. The previous energy intensity of the school was found to be 50.6 kWh/m(2)/year, but can theoretically be reduced to 40.19 kWh/mm(2)/year.
The spread of graphene in low-density polyethylene (LDPE) improves LDPE/graphene nanocompounds' thermal/mechanical/electrical characteristics. The images of scanning electron microscopy (SEM) verify full graphene exfoliation at 1000 °C. Inclusion graphene develops crystallinity; increases the local order of lattice and thermal stability of LDPE/graphene nanocompounds. The consistent distributions and further inclusion of graphene caused the great heat breakdown strength, increasing heat breakdown activation energy and a superior melting point (Tm) for LDPE nanocompounds. Percolation occurs with the graphene incorporation of 0.5 wt%. The complex viscosity test showed Newtonian behavior for LDPE at a very low frequency. But, graphene inclusion to LDPE changed the viscosity performance from liquid-like to solid-like which caused a decrease in the melt flow rate (MFR) values for all LDPE/graphene nanocompounds.
This paper examines the pattern of convergence in electricity intensity in a sample of 79 countries. We apply the residual augmented least squares regression to the convergence of energy intensity. This method has been used in the convergence of per capita energy consumption but not convergence of energy intensity. Furthermore, in contrast to the previous studies which mainly used the conventional beta convergence approach to examine conditional convergence, we use a beta convergence method that is capable of identifying the actual number of countries that contribute to conditional convergence. The sigma and gamma convergences of electricity intensity are also examined. In addition to the full sample of countries, we also examine convergence in African countries, Asian and Oceanic countries, American countries and European countries, separately. Convergences in OECD and non-OECD countries are also examined, separately. In the full sample, the results show convergence exists in 54% of the countries in the total sample. There is convergence in 65% of the African countries, 61% of the American countries, 43% of the Asian and Oceanic countries and 33% of the European countries. In terms of the regional classification, it is also observed that convergence exists for 58% of the non-OECD countries and 31% of the OECD countries. There is evidence for sigma convergence in all the blocs with the exception of European and non-OECD countries. With the exception of African countries, there is evidence for gamma convergence in all the countries and the various blocs. The policy implications of the results are discussed.
This study presented the implementation of a small-scale (50 W) solar energy harvesting system coupled with an electrolyzer and proton exchange membrane (PEM) fuel cell. The energy from the solar panel would be utilized by the electrolyzer to produce hydrogen gas. The hydrogen gas would be used, in turn, by the PEM fuel cell to generate electricity which supports both DC and AC load. Excess energy from the solar panel is also used to charge the lead-acid backup battery. Analysis of the system showed that 400 mL of hydrogen gas could be produced within every 17 minutes in optimal conditions; between 11 am until 4 pm with bright sunlight. For every 400 mL of hydrogen gas, the PEM fuel cell could sustain continuous operation of a 5V 500 mA DC load for 95 seconds. Theoretically, more than 7000 mL of hydrogen gas could be produced within 5 hours in strong sunlight, which could power up a 50 mA and 500 mA load for 4.7 hours and 28 minutes respectively, during evening or night operations. The proposed system could complement the traditional battery-based storage system while remaining as a clean source of energy production.
The chirp response of a thickness-drive tunable transducer for wide range time-bandwidth and sweep rates chirp signals is demonstrated experimentally and computationally. The computational evaluation uses recursive digital-filter model based on the z-transform method. The model is limited to simple lossless structure with no front and backing layers. The model and experimental results show that there is no limit on the maximum sweep rate of the chirp signal but practically the limit is determined by the limitation of the circuit that generates the control voltage that simulates a variable electric load.
Microbial electrochemical systems (MESs) are an attracting technology for the disposal of wastewater treatment and simultaneous energy production. In MESs, at the anode microorganisms through the catalytic activity generates electrons that can be converted into electricity or other valuable chemical compounds. Microorganisms those having ability to donate and accept electrons to and from anode and cathode electrodes, respectively are recognized as 'exoelectrogens'. In the MESs, it renders an important function for its performance. In the present mini-review, we have discussed the role of microbiome including pure culture, enriched culture and mixed culture in different BESs application. The effects of operational and biological factors on microbiome development have been discussed. Further discussion about the molecular techniques for the evaluation of microbial community analysis is addressed. In addition different electrochemical techniques for extracellular electron transfer (EET) mechanism of electroactive biofilms have been discussed. This review highlights the importance of microbiome in the development of MESs, effective operational factors for exo-electrogens activities as well their key challenges and future technological aspects are also briefly discussed.
Electricity is one of the most important resources and fundamental infrastructure for every nation. Its milestone shows a significant contribution to world development that brought forth new technological breakthroughs throughout the centuries. Electricity demand constantly fluctuates, which affects the supply. Suppliers need to generate more electrical energy when demand is high, and less when demand is low. It is a common practice in power markets to have a reserve margin for unexpected fluctuation of demand. This research paper investigates regression techniques: multiple linear regression (MLR) and vector autoregression (VAR) to forecast demand with predictors of economic growth, population growth, and climate change as well as the demand itself. Auto-Regressive Integrated Moving Average (Auto-ARIMA) was used in benchmarking the forecasting. The results from MLR and VAR (lag-values=20) and Auto-ARIMA are monitored for five months from June to October of 2019. Using the root mean square error (RMSE) as an indicator for accuracy, Auto-ARIMA has the lowest RMSE for four months except in June 2019. VAR (lag-values=20) shows good forecasting capabilities for all five months, considering it uses the same lag values (20) for each month. Three different techniques have been successfully examined in order to find the best model for the prediction of the demand.
Titanium alloys are difficult to machine using conventional methods, therefore, nonconventional processes are often chosen in many applications. Electrical discharge machining (EDM) is one of those nonconventional processes that is used frequently for shaping titanium alloys with their respective pros and cons. However, a good understanding of this process is very difficult to achieve as research results are not properly connected and presented. Therefore, this study investigates different types of EDM processes such as, wire EDM, die-sink EDM, EDM drill and hybrid EDM used to machine titanium alloys. Machining mechanism, tool electrode, dielectric, materials removal rate (MRR), and surface integrity of all these processes are critically analysed and correlated based on the evidence accessible in literature. Machining process suffer from lower material removal rate and high tool wear while applied on titanium alloys. Formation of recast layer, heat affected zone and tool wear is common in all types of EDM processes. Additional challenge in wire EDM of titanium alloys is wire breakage under severe machining conditions. The formation of TiC and TiO2 are noticed in recast layer depending on the type of dielectrics. Removal of debris from small holes during EDM drilling is a challenge. All these restricts the applications EDMed titanium alloys in high-tech applications such as, aerospace and biomedical areas. Most of these challenges come up due to extraordinary properties such as, low thermal conductivity, high melting point and high hardness, of titanium alloys. Though hybrid EDM has been introduced and there is some work on simulation of EDM process, further developments in EDM of this alloy is required for widening the application of this methods.
The work aimed to study the potential in producing a system with high microalgal protein recovery and separation by utilizing a one-step or integrated downstream process. This in turn enables green biorefinery of protein, contributing to circular bioeconomy whereby less energy, labor, and cost are required for the process. By utilizing electric three phase partitioning flotation system, high protein recovery yield, R of 99.42 ± 0.52% and high separation efficiency, E of 52.72 ± 0.40% system was developed. Scaling up also showed high protein recovery yield with R value of 89.13 ± 1.56%. Total processing duration (extraction, separation, and purification) was also significantly reduced to 10 min. This system showed remarkable potential in reducing processing time, alternatively cost of production, benefiting microalgal downstream processing. Concisely, through this system, microalgal bioprocessing will no longer be complex allowing a wide array of potentials for further studies in this field.
Due to its increasing demands for fossil fuels, Indonesia needs an alternative energy to diversify its energy supply. Landfill gas (LFG), which key component is methane (CH4), has become one of the most attractive options to sustain its continued economic development. This exploratory study seeks to demonstrate the added value of landfilled municipal solid waste (MSW) in generating sustainable energy, resulting from CH4 emissions in the Bantargebang landfill (Jakarta). The power generation capacity of a waste-to-energy (WTE) plant based on a mathematical modeling was investigated. This article critically evaluated the production of electricity and potential income from its sale in the market. The project's environmental impact assessment and its socio-economic and environmental benefits in terms of quantitative and qualitative aspects were discussed. It was found that the emitted CH4 from the landfill could be reduced by 25,000 Mt annually, while its electricity generation could reach one million kW ⋅h annually, savings on equivalent electricity charge worth US$ 112 million/year (based on US' 8/kW ⋅ h). An equivalent CO2 mitigation of 3.4 × 106 Mt/year was obtained. The income from its power sale were US$ 1.2 ×106 in the 1st year and 7.7 ×107US$ in the 15th year, respectively, based on the projected CH4 and power generation. The modeling study on the Bantargebang landfill using the LFG extraction data indicated that the LFG production ranged from 0.05 to 0.40 m3 per kg of the landfilled MSW. The LFG could generate electricity as low as US' 8 per kW ⋅ h. With respect to the implications of this study, the revenue not only defrays the cost of landfill's operations and maintenance (O&M), but also provides an incentive and means to further improve its design and operations. Overall, this work not only leads to a diversification of primary energy, but also improves environmental protection and the living standard of the people surrounding the plant.
The incessantly growing demand for electricity in today's world claims an efficient and reliable system of energy supply. Distributed energy resources such as diesel generators, wind energy and solar energy can be combined within a microgrid to provide energy to the consumers in a sustainable manner. In order to ensure more reliable and economical energy supply, battery storage system is integrated within the microgrid. In this article, operating cost of isolated microgrid is reduced by economic scheduling considering the optimal size of the battery. However, deep discharge shortens the lifetime of battery operation. Therefore, the real time battery operation cost is modeled considering the depth of discharge at each time interval. Moreover, the proposed economic scheduling with battery sizing is optimized using firefly algorithm (FA). The efficacy of FA is compared with other metaheuristic techniques in terms of performance measurement indices, which are cost of electricity and loss of power supply probability. The results show that the proposed technique reduces the cost of microgrid and attain optimal size of the battery.
In this paper, the challenge of harmonic injection mitigation becomes critical with the massive use of inverters in electrical distribution systems that has been discussed and analyzed. Currently, between the inverter and the grid, L, LC or LCL filters is often used to mitigate the current harmonic. Further, filter connection in both delta-to-star or star-to-delta transformer for state space model of LC filter couplings with impedance is obtained in this paper and it also talked about the different passive damping techniques that been used to suppress the resonance effect on the filter. The effect of series and parallel damping resistor techniques that impact filtering and stability are also been analyzed and discussed. At the end, the simulation results show that LCL filter with parallel damping resistor achieves best performance compared on those for L, LC, or LCL with series damping resistor while at the same time enhancing the smoothness of the signal output while at the same time reducing the percentage of total harmonic distortion between inverter-grid connection.
Curdlan (CN)-doped montmorillonite/poly(N-isopropylacrylamide-co-N,N'-methylene-bis-acrylamide) [CN/MT/P(NIPA-co-MBA)] smart nanocomposites (NCs) were developed for efficient erlotinib HCl (ERL) delivery to lung cancer cells. The placebo NCs demonstrated excellent biodegradability, pH/thermo-responsive swelling profiles and declined molar mass (M¯c) between the crosslinks with increasing temperature. The XRD, FTIR, DSC, TGA, and SEM analyses revealed the architectural chemistry of these NC scaffolds. The NCs loaded with ERL (F-1-F-3) displayed acceptable diameter (734-1120 nm) and zeta potential (+1.16 to -11.17 mV), outstanding drug entrapping capability (DEE, 78-99%) and sustained biphasic ERL elution patterns (Q8h, 53-91%). The ERL release kinetics of the optimal matrices (F-3) obeyed Higuchi model and their transport occurred through anomalous diffusion. The mucin adsorption behaviour of these matrices followed Freudlich isotherms. As compared to pure ERL, the formulation (F-3) displayed an improved anti-proliferative potential and induced apoptosis more effectively on A549 cells. Thus, the CN-doped smart NCs could be utilized as promising drug-cargoes for lung cancer therapy.
Electricity has become one of the necessities for human daily activities. The presence of electric
current produces electromagnetic fields (EMF) at extremely low frequency (ELF). The problem arises
when scientists suggests a possible connection between ELF exposure to human health and safety.
Concerned about the safety and health of students and staff, Universiti Kebangsaan Malaysia (UKM)
took the initiative to identify possible ELF sources and measure their exposure in various locations
around the UKM main campus in Bangi. This paper reports the results obtained from the monitoring
of the magnetic flux density at three identified locations in the vicinity of the overhead high-voltage
transmission line which transverses the university compound and compare the maximum value results
with the exposure limit suggested by the International Committee on Non Ionising Radiation
Protection (ICNIRP) for ELF. Measurements were done with an (Extech) Three Axis
Electromagnetic Field (EMF) Meter (Model 430826) to determine the magnetic flux density. The
lateral profile method was applied as the standard measurement methodology. Results showed that the
maximum value of the magnetic flux density was 12.5 mG, which is below the suggested ICNIRP
public exposure limit of 1000 mG, or in percentage ratio, 1.25% of ICNIRP public exposure limit.
Results from the statistical Kruskal-Wallis test showed that there is a significant difference in the
distributions of the magnetic flux densities at the different locations (P < 0.05). In conclusion, the
measured locations are still safe for people in short-term exposure. However, long-term exposure
measurements still need to be done to provide concrete data on the ELF-emission levels in UKM.
Therapies with magnetic/electromagnetic field are employed to relieve pains or, to accelerate flow of blood-particles, particularly during the surgery. In this paper, a theoretical study of the blood flow along with particles suspension through capillary was made by the electro-magneto-hydrodynamic approach. Analytical solutions to the non-dimensional blood velocity and non-dimensional particles velocity are obtained by means of the Laplace transform with respect to the time variable and the finite Hankel transform with respect to the radial coordinate. The study of thermally transfer characteristics is based on the energy equation for two-phase thermal transport of blood and particles suspension with viscous dissipation, the volumetric heat generation due to Joule heating effect and electromagnetic couple effect. The solution of the nonlinear heat transfer problem is derived by using the velocity field and the integral transform method. The influence of dimensionless system parameters like the electrokinetic width, the Hartman number, Prandtl number, the coefficient of heat generation due to Joule heating and Eckert number on the velocity and temperature fields was studied using the Mathcad software. Results are presented by graphical illustrations.
Polymer nanocomposites have recently been attracting attention among researchers in electrical insulating applications from energy storage to power delivery. However, partial discharge has always been a predecessor to major faults and problems in this field. In addition, there is a lot more to explore, as neither the partial discharge characteristic in nanocomposites nor their electrical properties are clearly understood. By adding a small amount of weight percentage (wt%) of nanofillers, the physical, mechanical, and electrical properties of polymers can be greatly enhanced. For instance, nanofillers in nanocomposites such as silica (SiO2), alumina (Al2O3) and titania (TiO2) play a big role in providing a good approach to increasing the dielectric breakdown strength and partial discharge resistance of nanocomposites. Such polymer nanocomposites will be reviewed thoroughly in this paper, with the different experimental and analytical techniques used in previous studies. This paper also provides an academic review about partial discharge in polymer nanocomposites used as electrical insulating material from previous research, covering aspects of preparation, characteristics of the nanocomposite based on experimental works, application in power systems, methods and techniques of experiment and analysis, and future trends.
The political upheaval and the civil war in Libya had a painful toll on the operational reliability of the electric energy supply system. With frequent power cuts and crumbling infrastructure, mainly due to the damage inflicted upon several power plants and grid assets as well as the lack of maintenance, many Libyans are left without electricity for several hours a day. As the country has a staggeringly immense potential of solar energy, it is inevitable to exploit such potential, to avert system-wide blackouts. This paper investigates the use of small-scale PV systems in local communities as non-wires alternative (NWA), offering excess energy exchange within local/neighboring microgrids (MGs) for reliable electric power supply. Different combinations of PV/storage/diesel distributed generations (DGs), with grid-interface options, were applied on a case study of a typical dwelling in the Eastern Libyan city of Benghazi. Technical and financial feasibility assessments were carried out to contrast between various supply combinations. Sensitivity analysis of the PV-grid system was also conducted using Net Present Value (NPV) and the payback time indicators to determine the impacts of Feed-in Tariff (FiT) rates, financial incentives, electricity tariff, and inflation rate on the economic viability of the PV grid system. Results show that the PV-grid system has a promising potential under reasonable set of varying system parameters. On top of its social and environmental-friendly advantages, the PV-battery system is found to be more economical when adopted as a standalone NWA solution as compared to the diesel generator option, even at the lowest diesel price. The PV-grid system does not only provide a short-term remedy to the rolling blackouts in Libya but also enhances system operational reliability by providing a NWA to rundown or shattered grid infrastructure, thus bolstering energy provision in residential neighborhoods.
Doping is the key feature in semiconductor device fabrication. Many strategies have been discovered for controlling doping in the area of semiconductor physics during the past few decades. Electrical doping is a promising strategy that is used for effective tuning of the charge populations, electronic properties, and transmission properties. This doping process reduces the risk of high temperature, contamination of foreign particles. Significant experimental and theoretical efforts are demonstrated to study the characteristics of electrical doping during the past few decades. In this article, we first briefly review the historical roadmap of electrical doping. Secondly, we will discuss electrical doping at the molecular level. Thus, we will review some experimental works at the molecular level along with we review a variety of research works that are performed based on electrical doping. Then we figure out importance of electrical doping and its importance. Furthermore, we describe the methods of electrical doping. Finally, we conclude with a brief comparative study between electrical and conventional doping methods.
Spin field-effect transistors (SpinFETs) are promising candidates for future integrated microelectronic circuits. A SpinFET is composed of two ferromagnetic contacts (source and drain), which sandwich a semiconductor channel. Current modulation is achieved by electrically tuning the gate voltage dependent strength of the spin-orbit interaction in the semiconductor region. We investigated the properties of SpinFETs for various parameters - the band mismatch, the barrier height between the contacts and the channel and the strength of the spin-orbit coupling, for various temperatures. We demonstrated that the creation of Schottky barriers between the channel and the contacts guarantees a pronounced modulation of the magnetoresistance sufficient to open a possibility to operate SpinFETs at room temperature. We also demonstrated that silicon fins with [100] orientation exhibit a stronger dependence on the value of the spin-orbit interaction and are thus preferable for practical realization of silicon-based SpinFETs.
A new class of liquid crystalline acetylide-imine system was successfully synthesized, characterized
and deposited on indium tin oxide (ITO) coated substrate via electrochemical deposition
method for potential organic film application. The relationship between liquid crystal
molecular structure, phase transition temperature and electrical performance was evaluated.
The mesomorphic properties were identified via polarized optic microscopy (POM) which displayed
fan-shaped texture of smectic A phase and their corresponding transition enthalpies
are in concurrence with DSC and TGA studies. The findings from the conductivity analysis
revealed that the fabricated film exhibits good electrical performance where it displayed
linear current-voltage relationship of I-V curve. Therefore, this proposed type of molecular
framework has given an ideal indication to act as transporting material for application in
optoelectronic devices.