Soursop is a healthy fruit. Peels form about 20% of the soursop fruit and are usually discarded as waste product. With a view to utilizing soursop peel as a source of valuable compounds, this study aimed to investigate the influence of different extraction conditions on total phenolic content (TPC) and antioxidant capacity (AC) of soursop (Annona muricata L.) peel.
This review presents the application of carbon nanotubes as sorbent materials in the analysis of pesticide residues in fruits and vegetables. The advantages, limitations, and challenges of carbon nanotubes, with respect to their use in analytical chemistry, are presented. The efficiency of their application as extraction sorbent materials (in terms of LOD, LOQ, linearity, relative recovery, and RSD) in SPE, solid-phase microextraction, multi-plug filtration clean-up, matrix solid-phase dispersion, and the quick, easy, cheap, effective, rugged and safe method is reported. The synthesis, functionalization, purification, and characterization methods of carbon nanotubes are also discussed.
We have previously reported on the antioxidant potential of Artocarpus heterophyllus J33 (AhJ33) variety fruit waste from different extraction methods. In the study, the rind maceration extract (RDM) exhibited the highest phenolic and polyphenolic contents and strongest antioxidant potential measured by the DPPH assay (R2 = 0.99). In this paper, we now report on the bioassay-guided fractionation of the active ethyl acetate (EtOAC) fraction of RDM and its TOF-LCMS analysis. Seven sub-fractions resulting from the chromatographic separation of the EtOAC fraction showed radical scavenging activities between 80 and 94% inhibition. Subsequent LCMS analysis led to the identification of fifteen compounds comprising 5 phenolics and 10 non-phenolic compounds, 11 of which are reported for the first time from AhJ33 variety. Most of the identified compounds have been reported to possess antioxidant activity in many previous studies. This indicates that AhJ33 is a promising source of antioxidants for the development of food and nutraceutical products.
In this work, sonication (20-kHz) was conducted to assist the biosorption of phenolics from blueberry pomace extracts by brewery waste yeast biomass. The adsorption capacity of yeast increased markedly under ultrasonic fields. After sonication at 394.2 W/L and 40 °C for 120 min, the adsorption capacity was increased by 62.7% compared with that under reciprocating shaking. An artificial neural network was used to model and visualize the effects of different parameters on yeast biosorption capacity. Both biosorption time and acoustic energy density had positive influences on yeast biosorption capacity, whereas no clear influence of temperature on biosorption process was observed. Regarding the mechanism of ultrasound-enhanced biosorption process, the amino and carboxyl groups in yeast were considered to be associated with the yeast biosorption property. Meanwhile, ultrasound promoted the decline of the structure order of yeast cells induced by phenolic uptake. The interactions between yeast cells and phenolics were also affected by the structures of phenolics. Moreover, the mass transfer process was simulated by a surface diffusional model considering the ultrasound-induced yeast cell disruption. The modeling results showed that the external mass transfer coefficient in liquid phase and the surface diffusion coefficient under sonication at 394.2 W/L and 40 °C were 128.5% and 74.3% higher than that under reciprocating shaking, respectively.
The presence of natural radionuclides in the food chain point to a need to assess concentration levels and concomitant radiological risk. Highly popular and forming a staple part of the diet in North Africa, the Arabian Peninsula, and West Asia, palm dates growing naturally there have even greater marketability than simple satisfaction of domestic demand, the palm dates representing a valuable export item. Accurate knowledge of the levels of natural radioactivity in the fruit is thus of importance. In this study, using high-purity germanium gamma-ray spectrometry, quantification has been made of natural radionuclide concentrations in imported dates originating from Iran, Saudi Arabia, and Tunisia. Sample analyses reveal respective mean activity concentrations of 1.4 ± 0.3, 0.8 ± 0.4, and 186 ± 9 Bq kg dry weight for Ra, Ra, and K. For each nuclide, the mean concentration varies little between the dates of the three represented regions. The estimated committed effective dose resulting from the consumption of date fruits for a typical adult was found to be 29.9 μSv y, well below the global internal dose of 290 μSv y assessed by the United Nations Scientific Committee on the Effects of Atomic Radiation to be due to food and water intake. Similarly, the excess lifetime cancer risk due to naturally occurring radioactive material exposure via date fruit consumption is seen to be below the International Commission on Radiological Protection cancer risk factor of 2.5 × 10 based on the additional annual dose limit of 1 mSv for a member of the general public. The results show no significant uptake in the analyzed date fruits.
Biosorption ability of date palm empty fruit bunch (DPEFB) was examined for the removal of toxic hexavalent chromium (Cr6+) ions from synthetic wastewater. The pretreated DPEFB biosorbent was studied for its morphology and surface chemistry through Scanning electron microscopy, Energy dispersive elemental analysis and Fourier transform infrared spectroscopy. Effect of biosorption parameters such as pH, biosorbent dosage, contact time, temperature, initial feed concentration and agitation speed on the Cr6+ ions removal efficiency by DPEFB was critically evaluated. The isoelectric point for the DPEFB sorbent was observed at pH 2, above which it was dehydronated to capture the positively charged Cr6+ ions. Batch biosorption studies showed that an optimal chromium removal efficiency of 58.02% was recorded by the DPEFB biosorbent for pH 2, dosage 0.3 g, 100 rpm agitation speed, 120 min contact time, 50 mg/L initial feed concentration and 30 °C operational temperature. Thermodynamic analysis showed that the binding of Cr6+ ions on DPEFB surface was exothermic, stable and favorable at room temperature. Equilibrium behavior of chromium binding on DPEFB was more aligned to Temkin isotherm (R2 = 0.9852) highlighting the indirect interactions between Cr6+ ions and the biosorbent. Kinetic modeling revealed that the biosorption of Cr6+ ions by DPEFB obeyed pseudo-second order model than the pseudo-first order and intra-particle diffusion models. Reusability studies of the DPEFB sorbent showed that NaNO3 was an effective regenerant and the biosorbent can be efficiently reused up to three successive biosorption-desorption cycles for chromium removal. In summary, the results clearly showed that the DPEFB biowaste seems to be an efficient, economic and eco-friendly biosorbent for sustainable removal of toxic hexavalent chromium ions from domestic and industrial wastewater streams.
Cellulose in nanostructures was successfully isolated from empty fruit bunch biomass via a novel one-pot oxidative-hydrolysis technique. The physicochemical properties of nanocellulose prepared via one-pot process have shown comparable characteristics as products isolated via conventional multistep purification approach (namely dewaxing, chlorite bleaching process, alkalization, and acid hydrolysis). The chemical composition study indicated that the one-pot oxidative-hydrolysis process successfully extracted cellulose (91.0%), with the remaining minority being hemicellulose and lignin (∼6%) in the final product. Crystallinity profile of one-pot treated product (80.3%) was higher than that of multistep isolated nanocellulose (75.4%), which indicated that the disorder region (amorphous) in cellulose fibers was successfully removed. In additional to that, the morphology study demonstrated that nanocellulose prepared by one-pot process rendered spider-web-like network nanostructure, with an average diameter of fibers at a range of 51.6±15.4nm. The nanocellulose product showed high thermal stability (320°C), which was ready for nanocomposite application. One-pot oxidative-hydrolysis technique is a simple and versatile route for the preparation of nanocellulose from complex biomass within 90°C and 6h period, with minimum wastewater as compared to the multistep process.
Optimization process is an important aspect in the natural product extractions. Herein, an alternative approach is proposed for the optimization in extraction, namely, the Generalized Likelihood Uncertainty Estimation (GLUE). The approach combines the Latin hypercube sampling, the feasible range of independent variables, the Monte Carlo simulation, and the threshold criteria of response variables. The GLUE method is tested in three different techniques including the ultrasound, the microwave, and the supercritical CO2 assisted extractions utilizing the data from previously published reports. The study found that this method can: provide more information on the combined effects of the independent variables on the response variables in the dotty plots; deal with unlimited number of independent and response variables; consider combined multiple threshold criteria, which is subjective depending on the target of the investigation for response variables; and provide a range of values with their distribution for the optimization.
Epilepsy is a devastating neurological disorder. Current anti-convulsant drugs are only effective in about 70% of patients, while the rest remain drug-resistant. Thus, alternative methods have been explored to control seizures in these drug-resistant patients. One such method may be through the utilization of fruit phytochemicals. These phytochemicals have been reported to have beneficial properties such as anti-convulsant, anti-oxidant, and anti-inflammatory activities. However, some fruits may also elicit harmful effects. This review aims to summarize and elucidate the anti- or pro-convulsant effects of fruits used in relation to seizures in hopes of providing a good therapeutic reference to epileptic patients and their carers. Three databases, SCOPUS, ScienceDirect, and PubMed, were utilized for the literature search. Based on the PRISMA guidelines, a total of 40 articles were selected for critical appraisal in this review. Overall, the extracts and phytochemicals of fruits managed to effectively reduce seizure activities in various preclinical seizure models, acting mainly through the activation of the inhibitory neurotransmission and blocking the excitatory neurotransmission. Only star fruit has been identified as a pro-convulsant fruit due to its caramboxin and oxalate compounds. Future studies should focus more on utilizing these fruits as possible treatment strategies for epilepsy.
Biochar is the bio-solid material produced by pyrolysis. The biochar properties are controlled by feedstock and pyrolysis variables. In this study, the impacts of these production variables on biochar yield and physicochemical properties including pH, cation exchange capacity (CEC), total organic carbon (TOC) content, surface area, and pore volume and size were investigated. Rice husk (RH) and oil palm empty fruit bunches (EFB) were used as biomass. The biochars were produced at temperature range of 300 to 700 °C, heating rate of 3 to 10 °C/min and retention time of 1 to 3 h. The pyrolysis conditions were optimized using response surface methodology (RSM) technique to maximize the values of the responses. Analysis of variance (ANOVA) of the results demonstrated that the data fitted well to the linear and quadratic equations. Temperature was found to be the most effective parameter on the responses followed by retention time and heating rate, sequentially. CEC, TOC, surface area, and pore characteristics were evaluated as biochar properties determining their sorption potential. The optimum conditions for the maximum values of the properties were temperatures of 700 and 493.44 °C and time of 3 and 1 h for RH and EFB biochars, respectively. Heating rate at 3 °C/min was found to be the best rate for both biochars. The structure of EFB biomass was more sensitive to heating than rice husk. The biomass type and the production variables were demonstrated as the direct effective factors on biochar yield and physicochemical properties.
Herein, tropical fruit biomass wastes including durian seeds (DS) and rambutan peels (RP) were used as sustainable precursors for preparing activated carbon (DSRPAC) using microwave-induced H3PO4 activation. The textural and physicochemical characteristics of DSRPAC were investigated by N2 adsorption-desorption isotherms, X-ray diffraction, Fourier transform infrared, point of zero charge, and scanning electron microscope analyses. These findings reveal that the DSRPAC has a mean pore diameter of 3.79 nm and a specific surface area of 104.2 m2/g. DSRPAC was applied as a green adsorbent to extensively investigate the removal of an organic dye (methylene blue, MB) from aqueous solutions. The response surface methodology Box-Behnken design (RSM-BBD) was used to evaluate the vital adsorption characteristics, which included (A) DSRPAC dosage (0.02-0.12 g/L), (B) pH (4-10), and (C) time (10-70 min). The BBD model specified that the DSRPAC dosage (0.12 g/L), pH (10), and time (40 min) parameters caused the largest removal of MB (82.1%). The adsorption isotherm findings reveal that MB adsorption pursues the Freundlich model, whereas the kinetic data can be well described by the pseudo-first-order and pseudo-second-order models. DSRPAC exhibited good MB adsorption capability (118.5 mg/g). Several mechanisms control MB adsorption by the DSRPAC, including electrostatic forces, π-π stacking, and H-bonding. This work shows that DSRPAC derived from DS and RP could serve as a viable adsorbent for the treatment of industrial effluents containing organic dye.
Sodium hypochlorite (NaOCl), an effective endodontic irrigant against Enterococcus faecalis (EF), is harmful to periapical tissues. Natural pineapple-orange eco-enzymes (M-EE) and papaya eco-enzyme (P-EE) could be potential alternatives. This study aimed to assess the antimicrobial efficacy of M-EE and P-EE at different concentrations and fermentation periods against EF, compared to 2.5% NaOCl. Fermented M-EE and P-EE (3 and 6 months) at various concentrations were mixed with EF in a 96-well plate incubated for 24 h anaerobically. Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of M-EE and P-EE were determined via EF growth observation. EF inhibition was quantitatively measured and compared between different irrigants using the one-way analysis of variance (ANOVA), and different fermentation periods using the independent-samples T-test. M-EE and P-EE showed MIC at 50% and MBC at 100% concentrations. There was no significant difference in antimicrobial effect when comparing M-EE and P-EE at 50% and 100% to 2.5% NaOCl. P-EE at 6 months fermentation exhibited higher EF inhibition compared to 3 months at concentrations of 25% (p = 0.017) and 0.78% (p = 0.009). The antimicrobial properties of M-EE and P-EE, at both 100% and 50% concentrations, are comparable to 2.5% NaOCl. They could therefore be potential alternative endodontic irrigants, but further studies are required.
This article presents an optimized ultrasound-assisted ethanolic extraction (UAEE) and characterization of selected high-value components from Gemlik olive fruit (GOF) harvested from Potohar region of Pakistan. Response surface methodology (RSM), involving central composite design (CCD), was applied to optimize the extraction variables i. e., temperature (25-65 °C), extraction time (15-45 min) and aqueous ethanol concentration (60-90 %) for optimal recovery of bioactives extract, total phenolic contents (TPC) and DPPH free radical scavengers. Under the optimized set of conditions such as 43 °C temperature, 32 min extraction time and 80 % aqueous ethanol, the best extract yield (218.82 mg/g), TPC (19.87 mg GAE/g) and DPPH scavenging activity (63.04 %) were recorded. A quadratic polynomial model was found to be reasonably fitted to the observed results for extract yield (p<0.0001 and R2 =0.9941), TPC (p<0.0001 and R2 =0.9891), and DPPH radical scavenging activity (p<0.0001 and R2 =0.9692). Potent phenolic compounds were identified by GC/MS in GOF extract and considerable amount of essential fatty acids were also detected. The current findings support the use of UAEE as an effective green route for optimized recovery of high-value components from GOF and hence its applications can be extended to functional food and nutra-pharmaceutical developments.
This study represents the first paper of the effects of growth regulators on the physiochemical and phytochemical properties of the wax apple fruit, a widely cultivated fruit tree in southeast Asia. Net photosynthesis, sucrose phosphate synthase (SPS) activity, peel color, fruit firmness, juice content, pH value, total soluble solids (TSSs), and the sugar acid ratio were all significantly increased in growth regulators (PGRs) treated fruits. The application of gibberellin (GA(3)), naphthalene acetic acid (NAA), and 2,4-dichlorophenoxy acetic acid (2,4-D) significantly reduced titratable acidity and increased total sugar and carbohydrate content compared to the control. The 50 mg/L GA₃, 10 mg/L NAA, and 5 mg/L 2,4-D treatments produced the greatest increases in phenol and flavonoid content; vitamin C content was also higher for these treatments. PGR treatment significantly affected chlorophyll, anthocyanin, and carotene content and produced higher phenylalanine ammonia lyase (PAL) and antioxidant activity levels. There was a positive correlation between peel color and TSS and antioxidant activity and both phenol and flavonoid content and PAL activity and anthocyanin formation. A taste panel assessment was also performed, and the highest scores were given to fruits that had been treated with GA₃ or auxin. The study showed that application of 50 mg/L GA₃, 10 mg/L NAA, and 5 mg/L 2,4-D once a week from bud development to fruit maturation increased the physiochemical and phytochemical properties of wax apple fruits.
We present a biogenic method for the synthesis of palladium nanoparticle (PdNP)-modified by reducing graphene oxide sheets (rGO) in a one-pot strategy using Ficus carica fruit juice as the reducing agent. The synthesized material was well characterized by morphological and structural analyses, including, Ultraviolet-Visible spectroscopy (UV-Vis), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and Transmission Electron Microscopy (TEM) and Raman spectroscopy. The results revealed that the PdNP modified GO are spherical in shape and estimated to be a dimension of ~0.16 nm. The PdNP/graphene exhibits a great catalytic activity in Suzuki cross-coupling reactions for the synthesis of biaryl compounds with various substrates under both aqueous and aerobic conditions. The catalyst can be recovered easily and is suitable for repeated use because it retains its original catalytic activity. The PdNP/rGO catalyst synthesized by an eco-friendly protocol was used for the Suzuki coupling reactions. The method offers a mild and effective substitute to the existing methods and may significantly contribute to green chemistry.
This study investigated the effects of pineapple peel powder with varied chemical profiles and sonication-assisted polyphenol biotransformation during fermentation on the quality characteristics of yogurt products. It aimed at exploring the feasibility of sonication-assisted fermentation to enhance the physicochemical properties, control post-acidification, and improve antioxidant activities in yogurts fortified with polyphenol-rich pineapple peel powder. Targeted analysis showed that polyphenol-rich pineapple dietary fiber obtained by ultrasonication-assisted extraction (NPFU) exhibited the slowest rates of acidification, highest antioxidant capacity, and lowest degree of whey separation at 21.67 %. Sonication pretreatments significantly increased transformation of free phenolic acids derived from pineapple peel fiber during fermentation, particularly increasing the accumulation of ferulic acid, caffeic acid and 5-hydroxyflavone, revealing the positive effects of sonication-mediated fermentation in promoting the hydrolysis of conjugated phenolics into free fractions. Yogurts fortified with pineapple peel fiber displayed significantly higher antioxidant activities (p
This study examines the in vitro antifungal properties and in vivo efficacy of thymol-cinnamaldehyde (TH-CIN) loaded nanocapsules, prepared using chitosan (CH) and hydroxypropyl methylcellulose (H) with varying ultrasonic power (200-600 W), for controlling Rhizopus stolonifer in papaya. Ultrasonic power notably influenced the nanocapsules' antifungal properties, both in vitro and in vivo. Higher ultrasonic power resulted in improved antifungal activity, with NC-CH-400 and NC-CH-H-600 formulations achieving the highest inhibition zones (94.67 % and 93.33 %, respectively) against R. stolonifer in vitro. The Minimum Inhibitory Concentration (MIC) for CH formulations was 6.25 mg/mL, while the Minimum Fungicidal Concentration (MFC) for all formulations was 50 mg/mL. Protein leakage assays demonstrated significant disruption of R. stolonifer cell membranes, with NC-CH-400 and NC-CH-H-600 at MFC reducing intracellular protein concentrations by over 95 %. In vivo tests showed that NC-CH-400 nanocapsule-coated papayas, whether sprayed or dipped, reduced weight loss to 0.54 % and 0.86 %, respectively, and exhibited lower decay severity indices, particularly during storage. Spraying was more effective than dipping in preventing decay. Peel color analysis revealed that coated fruits maintained acceptable ripeness levels over 10 days, indicating delayed maturation. Coated fruits also exhibited better color consistency and were preferred in sensory evaluations for improved taste, aroma, color, and texture, particularly with NC-CH-400 and NC-CH-H-600 coatings.
An HS-SPME method was developed using multivariate experimental designs, which was conducted in two stages. The significance of each factor was estimated using the Plackett-Burman (P-B) design, for the identification of significant factors, followed by the optimization of the significant factors using central composite design (CCD). The multivariate experiment involved the use of Minitab® statistical software for the generation of a 2(7-4) P-B design and CCD matrices. The method performance evaluated with internal standard calibration method produced good analytical figures of merit with linearity ranging from 1 to 500 μg/kg with correlation coefficient greater than 0.99, LOD and LOQ were found between 0.35 and 8.33 μg/kg and 1.15 and 27.76 μg/kg respectively. The average recovery was between 73% and 118% with relative standard deviation (RSD=1.5-14%) for all the investigated pesticides. The multivariate method helps to reduce optimization time and improve analytical throughput.
Eco-friendly pretreatment methods for lignocellulosic biomass are being developed as alternatives to chemical based methods. Superheated steam (SHS), hot compressed water (HCW) and wet disk milling (WDM) were used individually and with combination to partially remove hemicellulose and alter the lignin composition of recalcitrant structure of oil palm mesocarp fiber (OPMF). The efficiency of the pretreatment methods was evaluated based on the chemical compositions altered, SEM analysis, power consumption and degree of enzymatic digestibility. Hemicellulose removal (94.8%) was more pronounced under HCW compared to SHS, due to maximal contact of water and production of acetic acid which enhanced further degradation of hemicellulose. Subsequent treatment with WDM resulted in defibrillation of OPMF and expansion of the specific surface area thus increasing the conversion of cellulose to glucose. The highest glucose yield was 98.1% (g/g-substrate) when pretreated with HCW (200 °C, 20 min) and WDM which only consumed 9.6 MJ/kg of OPMF.
The pyrolysis of karanj fruit hulls (KFH) and karanj fruit hull hydrothermal carbonization (KFH-HTC) hydrochar was thermogravimetrically investigated under a nitrogen environment at 5 °C/min, 10 °C/min, and 20 °C/min. The pyrolysis decomposition of KFH biomass was faster than that of KFH-HTC hydrochar because of the high volatility and fixed carbon of KFH biomass. Weight loss percentage was also affected by the heating rates. The kinetic data were evaluated with the Kissinger-Akahira-Sunose and Flynn-Wall-Ozawa methods. The activation energy values obtained with these two methods were 61.06 and 68.53 kJ/mol for KFH biomass and 130.49 and 135.87 kJ/mol for KFH-HTC hydrochar, respectively. The analysis of kinetic process mechanisms was verified with the Coats-Redfern method. KFH-HTC hydrochar may play a potential role in transforming biomass to energy-rich feedstock for thermochemical applications because of its high heating value, high fixed carbon, and low ash and sulfur contents.