In 2015, a female patient returning to Australia from Sabah, Malaysia, was diagnosed with a suspected sylvatic dengue virus type 2 (DENV-2) infection, becoming the second case of imported highly divergent dengue virus infection recorded in Australia. We describe here the complete genome sequencing of the DENV-2 strain isolated from this patient.
The concept of the cultural construction of illness is important in terms of understanding people's behaviour. In this article, this idea is applied to psychiatric illness in Malaysia to explore how it is informed by sociocultural elements, a process that will help us understand the psychiatric expression and help-seeking behaviour of the country's population.
Microalgae are considered promising feedstock for the production of biofuels and other bioactive compounds, yet there are still challenges on commercial applications of microalgae-based products. This review focuses on the economic analysis, environmental impact, and industrial potential of biofuels production from microalgae. The cost of biofuels production remains higher compared to conventional fuel sources. However, integration of biorefinery pathways with biofuels production for the recovery of value-added products (such as antioxidants, natural dyes, cosmetics, nutritional supplements, polyunsaturated fatty acids, and so forth) could substantially reduce the production costs. It also paves the way for sustainable energy resources by significantly reducing the emissions of CO2 , NOx , SOx , and heavy metals. Large-scale biofuels production has yet to be successfully commercialized with many roadblocks ahead and heavy competition with conventional fuel feedstock as well as technological aspects. One of the prominent challenges is to develop a cost-effective method to achieve high-density microalgal cultivation on an industrial scale. The biofuels industry should be boosted by Government's support in the form of subsidies and incentives, for addressing the pressing climate change issues, achieving sustainability, and energy security.
The emergence of wireless technologies such as WirelessHART and ISA100 Wireless for deployment at industrial process plants has urged the need for research and development in wireless control. This is in view of the fact that the recent application is mainly in monitoring domain due to lack of confidence in control aspect. WirelessHART has an edge over its counterpart as it is based on the successful Wired HART protocol with over 30 million devices as of 2009. Recent works on control have primarily focused on maintaining the traditional PID control structure which is proven not adequate for the wireless environment. In contrast, Internal Model Control (IMC), a promising technique for delay compensation, disturbance rejection and setpoint tracking has not been investigated in the context of WirelessHART. Therefore, this paper discusses the control design using IMC approach with a focus on wireless processes. The simulation and experimental results using real-time WirelessHART hardware-in-the-loop simulator (WH-HILS) indicate that the proposed approach is more robust to delay variation of the network than the PID.
Landmarks, also known as feature points, are one of the important geometry primitives that describe the predominant characteristics of a surface. In this study we proposed a self-contained framework to generate landmarks on surfaces extracted from volumetric data. The framework is designed to be a three-fold pipeline structure. The pipeline comprises three phases which are surface construction, crest line extraction and landmark identification. With input as a volumetric data and output as landmarks, the pipeline takes in 3D raw data and produces a 0D geometry feature. In each phase we investigate existing methods, extend and tailor the methods to fit the pipeline design. The pipeline is designed to be functional as it is modularised to have a dedicated function in each phase. We extended the implicit surface polygonizer for surface construction in first phase, developed an alternative way to compute the gradient of maximal curvature for crest line extraction in second phase and finally we combine curvature information and K-means clustering method to identify the landmarks in the third phase. The implementations are firstly carried on a controlled environment, i.e. synthetic data, for proof of concept. Then the method is tested on a small scale data set and subsequently on huge data set. Issues and justifications are addressed accordingly for each phase.
In order to manage blue swimming crabs in Pangkajene Kepulauan, management measures are required. Since the environment which affects the abundance of the blue swimming crab varies seasonally, it is necessary to take into account the seasonal nature with the aim of developing a management strategy. The objectives of this study are to define the abundance of and fishing season of blue swimming crabs in the Pangkajene Kepulauan waters, South Sulawesi, Indonesia. The fishing season was analysed using seasonal index analysis, while fish abundance was analysed by means of Equilibrium-Schaefer. The result of this study demonstrated that fishermen allocate their fishing gear all year, although the fish catch is seasonal. Based on analysis of the result, the fishing season for the blue swimming crabs is short. The peak fishing season starts in May and finishes in June. However, in order to enable their families to earn a living, fishermen operated their fishing gear throughout the year. As a result, both catch landing and effort were close to maximum sustainable yield (MSY). In order to reduce fishing pressure, it is necessary to reduce fishing gear and have a seasonal arrangement regarding fishing gear allocation.
Remote sensing and geographic information system techniques are significant and popular approaches that have been used in recent years to measure and map urban growth patterns. This paper primarily aims to provide a basis for a literature review of urban growth measurement and mapping by using different methods. For this purpose, the general characteristics of measuring and mapping urban growth patterns are described and classified. The strengths and weaknesses of the various methods have been identified from an analysis and discussion of the characteristics of the techniques. Results of reviews confirm that combining quantitative and qualitative techniques, such as Shannon approach and change detection, to measure and map urban growth patterns will improve understanding of the phenomenon of urban growth. Moreover, using social and economic data such as population and income data will improve understanding of the relationships between causes and effects. The integration of social and economic factors with quantitative and qualitative techniques will contribute to a perfect evaluation of urban growth patterns and land use changes, taking technical, social, economic, spatial, and temporal factors into account.
In this paper, cap and pin porcelain insulator was studied under an environment with different levels
of humidity. The electric field strength and voltage distribution profile along the insulator string was
simulated using a computational software package. In this study, ANSYS Maxwell based on the Finite
Element Method (FEM) was used to simulate the short standard insulator string. The short standard
insulator string was modelled as a five-unit cap and pin porcelain insulator that was stacked according
to the IEC 60383 standard. Different humidity levels measured using relative humidity is applied to
the insulator. From this simulation, the locations within the insulator under high electric field stress are
identified when different humidity is applied.
Contaminated and ageing transmission line insulators often suffer from temporary or permanent loss of their insulating properties due to flashover resulting in power system failure. Surface discharges are precursors to flashover. To pre-empt any occurrence of flashovers, utility companies monitor the conditions of their insulators. There are numerous insulator surface monitoring techniques such as Leakage Current, Acoustics, and Infrared. However, these techniques may not be suitable for in-situ condition monitoring of the insulators as they are prone to noise, affected by environmental conditions or contact methods. Monitoring of the UV signals emitted by the surface discharges of these insulators has been reported to be a promising technique. However, comprehensive studies on this technique is lacking, especially on aged insulators. This paper investigated the UV signals of contaminated and aged insulators detected during surface discharge activities using UV pulse method. The time and frequency domain of the UV signals were analysed for a group of insulator samples having varying levels of contamination and phases of ageing. Results show that there is a strong correlation between the contamination level and ageing of the insulators with the amplitude and harmonic components of the UV signals. This correlation can useful to monitor in-service insulator surface conditions.
The walking of a humanoid robot needs to be robust enough in order to maintain balance in a dynamic environment especially on uneven terrain. A walking model based on multi-sensor is proposed for a Robotis DARwIn-OP robot named as Leman. Two force sensitive resistor (FSRs) on both feet equipped to Leman to estimate the zero moment point (ZMP) alongside with accelerometer and gyrosensor embedded in the body for body state estimation. The results show that the FSRs can successfully detect the unbalanced walking event if the protuberance exists on the floor surface and the accelerometer and gyrosensor (Inertial Measurement Unit, IMU) data are recorded to tune the balancing parameter in the model.
Accumulation kinetic trends of cesium and cadmium in the Penaeus monodon were studied using Cs-134 and Cd-109 as a tracer. The objective of this study was to quantify the uptake and loss/depuration kinetic of these two radionuclides in the Penaeus monodon. Uptake and loss/depuration kinetic of these two radionuclides in the Penaeus monodon were varied widely, displayed a simple double kinetic model of linear and exponential trend with time unless modified by moulting at the stage in the mount cycle. Therefore, the variation of Cs-134 and Cd-109 bio-concentration factor could be concluded considerably influence by moulting cycle, environmental and biological condition as well as physico-chemical that direct effects on their uptake and loss/depuration kinetic.
Sustainability is an important factor in designing vernacular architecture, including vernacular palace architecture; the latter refers to low-rise buildings similar to Traditional Malay Houses (TMH). However, the Istana Lama Seri Menanti is a 4-storey mid-rise vernacular palace which was designed with sustainability in mind. This mid-rise element of the palace communicates the vernacular architecture of TMH in Negeri Sembilan whereas sustainable designs are factored in environmentally friendly materials, construction methods, and the environmental impact of the building culturally and economically. This research was aimed at examining the sustainability approach of Istana Lama Seri Menanti as a mid-rise vernacular palace in the early 20th Century, and its impact on the current generation after 109 years. The research methodologies include case and precedent studies of vernacular palaces in Malaysia as well as interviews with experts in the field. In conclusion, the architectural sustainability of Istana Lama Seri Menanti had taken into account timber availability, consumption of naturally available resources, designs with minimal environmental impact and high cultural importance in the building design with the ultimate aim of conserving it for future generations.
This paper describes the culture of Traditional Malays, in particular the use of sustainable furniture inside a Traditional Malay House (TMH). The sample houses for this study were retrieved from archived reports, from the Centre for Built Environment in the Malay World (KALAM), Universiti Teknologi Malaysia (UTM). Data collected were analysed using Componential Analysis for the presence of components (based on drawings of archival reports as well as photographic evidence from site visits). The findings showed that the Malays used a variety ofsustainable furniture in their houses. Additionally, their homes had built-in furniture, which indicated the houses were pre-designed based on its user.
Prolonged drought conditions have adverse environmental and socio-economic impacts due to unmet water demands. Defining drought is difficult because of its onset and ending time. Therefore, characterisation of drought is essential for drought management operations. Thus, drought indices come in handy and are a practical approach to assimilate large amounts of data into quantitative information which can then be applied for drought forecasting, declaring drought levels, contingency planning and impact assessments. This study analyses drought events using indices, namely SPI and Deciles Index, computed with DrinC software program but are not popular in Malaysia. It is observed that both indices are identical and suitable for drought occurrences.
In recent years, the utility grid system is more essential for the power
transmission and distribution system because it cannot produce harmful
gases or no discharge waste in the environment. PWM based phase
synchronous invert systems are generally utilised in the high efficiency
energy supply, long distance and higher power quality. The inverter output
voltage depends on the coupling transformer, input sources and invert
controllers. An inverter using a three leg IGBT has been designed for utility
grid and simulated by using MATLAB2014a. In this paper, both sides of
the LCL filters are used for removing the DC ripple current, reducing the
noise and synchronous the output phase between inverter and the utility
grid. The PWM controller has created pulse signal to control the inverter,
electronic switches and precisely synchronise with grid line frequency. In
this system, the input DC voltage 500V, switching frequency 1.65 kHz, grid
frequency 50Hz, 20 km feeder (resistance, inductance and capacitance per
unit length, which are 0.1153, 1.05e-3 and 11.33e-09 ohms/km) with 30MW
three phase load (active and inductive reactive power which are 30e6 W
and 2e6 var) and also a balanced utility grid load of star configuration (00,
1200, and 2400 degree) are considered in the design. On the other hand,
three phase transformer consists of three signal phase transformers, normal
power 100e3, magnetization resistance and inductance which are 500 pu and
416.67pu are considered in this design. The system conversion efficiency
is 99.94% and 99.96%, while the total THD are 0.06% on inverter side
and 0.04% on grid side.
Pedestrians' fatality trend in road crashes has been improving in recent years though it remains third in rank behind
motorcyclists and car occupants. Based on the statistics, young pedestrians were the most affected group and the
commonest injury regions were head and legs. Pedestrian crashes occurred primarily in rural areas and straight roads
and at low light environment, and often involve cars and motorcycles. In addition to existing issues of careless and
illegal crossing practices, there are potential new hazards face by pedestrian, which are mobile electronic device use
and electric vehicle, especially when crossing roads. Road safety programs and interventions shall consider these new
issues.
Improving organizational performance is the main objective of any organization. Six
Sigma is one of the most important approaches to improve performance and sustain
competitive advantage. This article reviewed the literature related to organizational
performance and explains the potential impact of Six Sigma and innovation culture on
organizational performance. Given that previous studies have reported inconclusive
results, this paper tries to establish a mechanism to explain the role of Six Sigma in
improving organizational performance. Therefore, based on the theoretical foundation
and comprehensive review of previous literature, a research framework is proposed.
This proposed framework is grounded in the implementation of Six Sigma projects; it
also establishes that innovation culture can help organizations to achieve success in a
turbulent business environment.
Students are characterized according to their own distinct learning styles. Discovering students' learning style is significant in the educational system in order to provide adaptivity. Past researches have proposed various approaches to detect the students' learning styles. Among all, the Bayesian network has emerged as a widely used method to automatically detect students' learning styles. On the other hand, tree augmented naive Bayesian network has the ability to improve the naive Bayesian network in terms of better classification accuracy. In this paper, we evaluate the performance of the tree augmented naive Bayesian in automatically detecting students' learning style in the online learning environment. The experimental results are promising as the tree augmented naive Bayes network is shown to achieve higher detection accuracy when compared to the Bayesian network.
Dengue is the most rapidly increasing arthropodborne
disease globally. The disease burden has increased
exponentially, doubling almost every decade from the
estimated 8.3 million cases in 2010 to about 58.4 million
cases in 2013.1
The number of countries reporting
dengue has also increased. Before 1970, less than 9
countries reported dengue but now it has been reported
in more than 100 countries worldwide. It is transmitted
by two species of Aedes mosquito, Aedes aegypti and Ae.
albopictus. (Copied from article).
Workplace deviant behavior is an action performed voluntarily by an individual and harms the
organizational norms and affects individual, organization or both. Therefore, it is a priority to the
organization to understand and look at the workplace deviant behavior issue because different
individual and environment will cause differences in how an individual behaves. Understanding the
terms, factors, typologies and effects of deviant behavior will enable organization to draw the
rehabilitation plan so deviant behavior will be curbed from the beginning. Overcoming workplace
deviant behavior will result in positive impact to the organization management and financial and will
lead to positive and conducive environment at the workplace.