MyMedR

Displaying publications 1521 - 1540 of 10000 in total

Abstract:

Sort:

Revised Discriminating Lethal Doses For Resistance Monitoring Program on Aedes albopictus Against Temephos and Malathion in Penang Island, Malaysia

Rahim J, Ahmad AH, Kassim NF, Ahmad H, Ishak IH, Rus AC, et al.

J Am Mosq Control Assoc, 2016 Sep;32(3):210-216.
PMID: 27802400

Dengue vector control still heavily relies on the use of chemical insecticides, and the widespread use of insecticides has led to resistance in mosquitoes. The diagnostic dose is a key part of resistance monitoring. The present study corroborates the discriminating lethal doses of temephos and malathion based on dose-response of known susceptible strain of Aedes albopictus following the World Health Organization (WHO) diagnostic test procedure. Late 3rd and early 4th instars were tested with a range of larvicides to determine the lethal concentrations (LC50 and LC99) values. A slightly higher diagnostic dose of 0.020 mg/liter as compared with the WHO-established value of 0.012 mg/liter was observed for temephos. Meanwhile, a malathion diagnostic dose of 0.200 mg/liter is also reported here since there are no such reported values by WHO. Doubling the LC99 values of susceptible strains, 3 of the 5 wild-collected populations showed resistance to temephos and 2 showed incipient resistance; all 5 populations showed incipient resistance to malathion. The revised and established lethal diagnostic dose findings from the current work are crucial to elaborate on the variation in susceptibility of Ae. albopictus in future resistance monitoring programs in Malaysia.
Adulticidal Susceptibility Evaluation of Aedes albopictus Using New Diagnostic Doses in Penang Island, Malaysia

Rahim J, Ahmad AH, Ahmad H, Ishak IH, Rus AC, Maimusa HA

J Am Mosq Control Assoc, 2017 Sep;33(3):200-208.
PMID: 28854111 DOI: 10.2987/16-6607R.1

Insecticide-based vector control approaches are facing challenges due to the development of resistance in vector mosquitoes. Therefore, a proper resistance surveillance program using baseline lethal concentrations is crucial for resistance management strategies. Currently, the World Health Organization's (WHO) diagnostic doses established for Aedes aegypti and Anopheles species are being used to study the resistance status of Aedes albopictus. In this study, we established the diagnostic doses for permethrin, deltamethrin, and malathion using a known susceptible reference strain. Five field-collected populations were screened against these doses, following the WHO protocol. This study established the diagnostic dose of malathion at 2.4%, permethrin at 0.95%, and deltamethrin at 0.28%, which differ from the WHO doses for Aedes aegypti and Anopheles spp. Among the insecticides tested on the 5 wild populations, only deltamethrin showed high effectiveness. Different susceptibility and resistance patterns were observed with permethrin, malathion, and dichloro-diphenyl-trichloroethane (DDT) at 4%. This study may assist the health authorities to improve future chemical-based vector control operations in dengue-endemic areas.
The economic burden of chronic obstructive pulmonary disease (COPD) in the USA, Europe, and Asia: results from a systematic review of the literature

Anees Ur Rehman, Ahmad Hassali MA, Muhammad SA, Shah S, Abbas S, Hyder Ali IAB, et al.

Expert Rev Pharmacoecon Outcomes Res, 2020 Dec;20(6):661-672.
PMID: 31596632 DOI: 10.1080/14737167.2020.1678385

Background: Lack of information about economic burden of COPD is a major cause of lack of attention to this chronic condition from governments and policymakers. Objective: To find the economic burden of COPD in Asia, USA and Europe, and to identify the key cost driving factors in management of COPD patients. Methodology: Relevant studies assessing the cost of COPD from patient perspective or societal perspective were retrieved by thoroughly searching PUBMED, SCIENCE DIRECT, GOOGLE SCHOLAR, SCOPUS, and SAGE Premier Databases. Results: In the USA annual per patient direct medical cost and hospitalization cost were reported as $10,367 and $6852, respectively. In Asia annual per patient direct medical cost in Iran, Korea and Singapore was reported as $1544, $3077, and $2335, respectively. However, annual per patient hospitalization cost in Iran, Korea, Singapore, India, China, and Turkey was reported as $865, $1371, $1868, $296, $1477 and $1031, respectively. In Europe annual per patient direct medical cost was reported as $11,787, $10,552, $8644, $8203, $7760, $3190, $1889, $2162, and $2254 in Norway, Denmark, Germany, Italy, Sweden, Greece, Spain, Belgium, and Serbia, respectively. Conclusion: Limiting the disease to early stage and preventing exacerbations may reduce the cost of management of COPD.
Field study of pedestrians' comfort temperatures under outdoor and semi-outdoor conditions in Malaysian university campuses

Othman NE, Zaki SA, Rijal HB, Ahmad NH, Razak AA

Int J Biometeorol, 2021 Apr;65(4):453-477.
PMID: 33416948 DOI: 10.1007/s00484-020-02035-3

Difficulties in controlling the effects of outdoor thermal environment on the human body are attracting considerable research attention. This study investigated the outdoor thermal comfort of urban pedestrians by assessing their perceptions of the tropical, micrometeorological, and physical conditions via a questionnaire survey. Evaluation of the outdoor thermal comfort involved pedestrians performing various physical activities (sitting, walking, and standing) in outdoor and semi-outdoor spaces where the data collection of air temperature, globe temperature, relative humidity, wind speed, solar radiation, metabolic activity, and clothing insulation data was done simultaneously. A total of 1011 participants were interviewed, and the micrometeorological data were recorded under outdoor and semi-outdoor conditions at two Malaysian university campuses. The neutral temperatures obtained which were 28.1 °C and 30.8 °C were within the biothermal acceptable ranges of 24-34 °C and 26-33 °C of the PET thermal sensation ranges for the outdoor and semi-outdoor conditions, respectively. Additionally, the participants' thermal sensation and preference votes were highly correlated with the PET and strongly related to air and mean radiant temperatures. The findings demonstrated the influence of individuals' thermal adaptation on the outdoor thermal comfort levels. This knowledge could be useful in the planning and designing of outdoor environments in hot and humid regions to create better thermal environments.
Fulltext Fluid Structure Interaction on Paravalvular Leakage of Transcatheter Aortic Valve Implantation Related to Aortic Stenosis: A Patient-Specific Case

Basri AA, Zuber M, Basri EI, Zakaria MS, Aziz AFA, Tamagawa M, et al.

Comput Math Methods Med, 2020;2020:9163085.
PMID: 32454886 DOI: 10.1155/2020/9163085

This study investigated the impact of paravalvular leakage (PVL) in relation to the different valve openings of the transcatheter aortic valve implantation (TAVI) valve using the fluid structure interaction (FSI) approach. Limited studies were found on the subject of FSI with regards to TAVI-PVL condition, which involves both fluid and structural responses in coupling interaction. Hence, further FSI simulation with the two-way coupling method is implemented to investigate the effects of hemodynamics blood flow along the patient-specific aorta model subjected to the interrelationship between PVL and the different valve openings using the established FSI software ANSYS 16.1. A 3D patient-specific aorta model is constructed using MIMICS software. The TAVI valve identical to Edward SAPIEN XT 26 (Edwards Lifesciences, Irvine, California), at different Geometrical Orifice Areas (GOAs), is implanted into the patient's aortic annulus. The leaflet opening of the TAVI valve is drawn according to severity of GOA opening represented in terms of 100%, 80%, 60%, and 40% opening, respectively. The result proved that the smallest percentage of GOA opening produced the highest possibility of PVL, increased the recirculatory flow proximally to the inner wall of the ascending aorta, and produced lower backflow velocity streamlines through the side area of PVL region. Overall, 40% GOA produced 89.17% increment of maximum velocity magnitude, 19.97% of pressure drop, 65.70% of maximum WSS magnitude, and a decrement of 33.62% total displacement magnitude with respect to the 100% GOA.
Aquaculture industry: Supply and demand, best practices, effluent and its current issues and treatment technology

Ahmad A, Sheikh Abdullah SR, Hasan HA, Othman AR, Ismail N'

J Environ Manage, 2021 Jun 01;287:112271.
PMID: 33706093 DOI: 10.1016/j.jenvman.2021.112271

The aquaculture industry has become increasingly important and is rapidly growing in terms of providing a protein food source for human consumption. With the increase in the global population, demand for aquaculture is high and is estimated to reach 62% of the total global production by 2030. In 2018, it was reported that the demand for aquaculture was 46% of the total production, and with the current positive trends, it may be possible to increase tremendously in the coming years. China is still one of the main players in global aquaculture production. Due to high demand, aquaculture production generates large volumes of effluent, posing a great danger to the environment. Aquaculture effluent comprises solid waste and dissolved constituents, including nutrients and contaminants of emerging concern, thereby bringing detrimental impacts such as eutrophication, chemical toxicity, and food insecurity. Waste can be removed through culture systems, constructed wetlands, biofloc, and other treatment technologies. Some methods have the potential to be applied as zero-waste discharge treatment. Thus, this article analyses the supply and demand for aquaculture products, the best practices adopted in the aquaculture industry, effluent characteristics, current issues, and effluent treatment technology.
Measurement system analysis on the external standard using an azeotropic mixture of ethylene glycol and detailed uncertainties

Ahmad Hazmi AS, Abd Maurad Z, Mohd Noor MA, Nek Mat Din NSM, Idris Z

J Sep Sci, 2021 Apr;44(7):1471-1481.
PMID: 33522105 DOI: 10.1002/jssc.202000929

Ethylene glycol is a super commodity chemical and it has vital roles in various applications. Its co-production with other chemicals, such as ethylene carbonate and glycerol carbonate, has promised cheaper production cost. Its quantification presents a challenge as its contaminants, such as ethylene carbonate, produce a signal-reducing effect in flame ionized detector. The aim of this study is to evaluate external standard to quantify the composition of glycol mixture. Measurement system analysis was employed on the external standard method. Reliability of the external standard is statistically significant with low p-values, excellent capability indices, and high F-values. The external standard is found to have remarkable precision and trueness as both capability indices are mirroring each other. Furthermore, the capability analysis has a strong correlation with quality measurement. Based on capability indices, the limit of detection is recommended at S/N = 25 and the limit of quantification is recommended at S/N = 100 for a reliable measurement. A high degree of reliability is achieved coherently as almost all uncertainties of coefficients of variations are less than 5%. The established method was validated and successfully applied to glycol mixture at azeotropic distillation pilot plant.
Fulltext Application of Ground-Based LiDAR for Analysing Oil Palm Canopy Properties on the Occurrence of Basal Stem Rot (BSR) Disease

Husin NA, Khairunniza-Bejo S, Abdullah AF, Kassim MSM, Ahmad D, Azmi ANN

Sci Rep, 2020 04 15;10(1):6464.
PMID: 32296108 DOI: 10.1038/s41598-020-62275-6

Ground-based LiDAR also known as Terrestrial Laser Scanning (TLS) technology is an active remote sensing imaging method said to be one of the latest advances and innovations for plant phenotyping. Basal Stem Rot (BSR) is the most destructive disease of oil palm in Malaysia that is caused by white-rot fungus Ganoderma boninense, the symptoms of which include flattening and hanging-down of the canopy, shorter leaves, wilting green fronds and smaller crown size. Therefore, until now there is no critical investigation on the characterisation of canopy architecture related to this disease using TLS method was carried out. This study proposed a novel technique of BSR classification at the oil palm canopy analysis using the point clouds data taken from the TLS. A total of 40 samples of oil palm trees at the age of nine-years-old were selected and 10 trees for each health level were randomly taken from the same plot. The trees were categorised into four health levels - T0, T1, T2 and T3, which represents the healthy, mildly infected, moderately infected and severely infected, respectively. The TLS scanner was mounted at a height of 1 m and each palm was scanned at four scan positions around the tree to get a full 3D image. Five parameters were analysed: S200 (canopy strata at 200 cm from the top), S850 (canopy strata at 850 cm from the top), crown pixel (number of pixels inside the crown), frond angle (degree of angle between fronds) and frond number. The results taken from statistical analysis revealed that frond number was the best single parameter to detect BSR disease as early as T1. In classification models, a linear model with a combination of parameters, ABD - A (frond number), B (frond angle) and D (S200), delivered the highest average accuracy for classification of healthy-unhealthy trees with an accuracy of 86.67 per cent. It also can classify the four severity levels of infection with an accuracy of 80 per cent. This model performed better when compared to the severity classification using frond number. The novelty of this research is therefore on the development of new approach to detect and classify BSR using point clouds data of TLS.
Fulltext Occupational and Environmental Risk Factors Influencing the Inducement of Erythema among Nigerian Laboratory University Workers with Multiple Chemical Exposures

Reuben U, Ismail AF, Ahmad AL, Maina HM, Daud A

Int J Environ Res Public Health, 2019 04 13;16(8).
PMID: 31013942 DOI: 10.3390/ijerph16081334

: The chemicals from laboratories pose a significant risk forinducing erythema, an abnormal redness of the skin, as a result of poor occupational and environmental factors that promote hypersensitivity to a chemical agent. The aim of this present study was to determine the occupational and environmental risk factors influencing the inducement of erythema in laboratory workers due to exposure to chemicals. This was a cross-sectional study on a population-based sample of Nigerian university laboratory workers. Data were collected using the erythema index meter and an indoor air control meter. The study included 287 laboratory workers. The laboratory workers who properly used personal protective equipment (PPE) were 60% less likely to have induced erythema (adjusted odds ratio (AOR) = 0.40; 95% confidence interval CI: 0.22-0.77; probability value p = 0.011). The chemical mixture exceeding the permissible exposure limit (PEL) was found to have a small effect in inducing the erythema (AOR = 4.22; 95%CI: 2.88-12.11; p = 0.004). Most of the sampled laboratories where the respondents worked had unsuitable temperatures (AOR = 8.21; 95% CI: 4.03-15.01; p = 0.001). Erythema was more frequently found in the respondents who spent 4-5h in the laboratory (AOR = 3.11; 95%CI: 1.77-9.23; p = 0.001). However, high levels of ventilation reduce the likelihood of erythema in a laboratory by 82% (0.18). Multiple logistic regressions revealed that PPE, PEL, exposure time, temperature, and ventilation were the probable predictive factors associated with the inducement of erythema. Providing better educational knowledge and improving the attitude towards hazards and safety in a laboratory would lead to reduced rates of new cases.
Whole genome sequence of moderate halophilic marine bacterium Marinobacter litoralis SW-45: Abundance of non-coding RNAs

Musa H, Kasim FH, Gunny AAN, Gopinath SCB, Chinni SV, Ahmad MA

Int J Biol Macromol, 2019 Jul 15;133:1288-1298.
PMID: 31055112 DOI: 10.1016/j.ijbiomac.2019.05.003

A report on the de novo Whole Genome Sequence (WGS) of Marinobacter litoralis SW-45, a moderately salt-tolerant bacterium isolated from the seawater in Malaysia is presented. The strain has a genome size of 3.45 Mb and is capable of producing halophilic lipase, protease and esterase enzymes. Computational prediction of non-coding RNA (ncRNA) genes in M. litoralis SW-45 was performed using standalone software known as the non-coding RNA characterization (nocoRNAc). In addition, a phylogenetic tree showing the evolutionary relationship between the strain and other members of the genus Marinobacter was constructed using 16SrRNA sequence information. A total of 385 ncRNA transcripts, 1124 terminator region, and 2350 Stress Induced Duplex Destabilization sites were predicted. The current WGS shotgun project has provided the relevant genetic information that may be useful for the strain's improvement studies. This manuscript gives the first description of M. litoralis with a complete genome.
Fulltext Psychometric Properties of the Malay Version of the Internet Gaming Disorder Scale-Short Form (IGDS9-SF-M): Evidence from a Sample of Malaysian Undergraduates

Ling SL, Nik Jaafar NR, Tan KA, Bahar N, Baharudin A, Ahmad Tajjudin AI

Int J Environ Res Public Health, 2021 03 05;18(5).
PMID: 33807598 DOI: 10.3390/ijerph18052592

In recent years, increased interest in Internet Gaming Disorder has led to the development of the Internet Gaming Disorder Scale-Short Form. Translation and subsequent validation of such a scale are important for cross-cultural use. The aim of the present study was to examine the psychometric properties (factor structure, reliability, and validity) of the Malay Version of the Internet Gaming Disorder Scale-Short Form using a sample of Malaysian undergraduates. The present sample included 137 Malaysian undergraduates. Participants completed a self-administered online survey containing demographic items, the Malay Version of the Internet Gaming Disorder Scale-Short Form, the Problematic Online Gaming Questionnaire-Short Form, and the Malay Version of the Internet Addiction Test. The present findings confirm the one-factor model of the Malay Version of the Internet Gaming Disorder Scale-Short Form. Good reliability, as measured by Cronbach alpha, was found for the Malay Version of the Internet Gaming Disorder Scale-Short Form. The Malay Version of the Internet Gaming Disorder Scale-Short Form has demonstrated concurrent validity by significantly correlating with the Problematic Online Gaming Questionnaire-Short Form as well as demonstrated convergent validity with respect to the Malay Version of the Internet Addiction Test. The Malay Version of the Internet Gaming Disorder Scale-Short Form is a reliable and valid tool for assessing Internet Gaming Disorder in Malaysian undergraduates. As more research is still needed to confirm the status of Internet Gaming Disorder as a formal disorder, it is hoped that the Malay Version of the Internet Gaming Disorder Scale-Short Form can facilitate future research examining antecedents and consequences of Internet Gaming Disorder in a Malaysian setting.
Fulltext Impacts of biological and procedural factors on semiquantification uptake value of liver in fluorine-18 fluorodeoxyglucose positron emission tomography/computed tomography imaging

Mahmud MH, Nordin AJ, Ahmad Saad FF, Azman AZ

Quant Imaging Med Surg, 2015 Oct;5(5):700-7.
PMID: 26682140 DOI: 10.3978/j.issn.2223-4292.2015.05.02

Increased metabolic activity of fluorodeoxyglucose (FDG) in tissue is not only resulting of pathological uptake, but due to physiological uptake as well. This study aimed to determine the impacts of biological and procedural factors on FDG uptake of liver in whole body positron emission tomography/computed tomography (PET/CT) imaging.
Fulltext High Sensitivity Microfiber Interferometer Sensor in Aqueous Solution

Girei SH, Lim HN, Ahmad MZ, Mahdi MA, Md Zain AR, Yaacob MH

Sensors (Basel), 2020 Aug 21;20(17).
PMID: 32825539 DOI: 10.3390/s20174713

The need for environmental protection and water pollution control has led to the development of different sensors for determining many kinds of pollutants in water. Ammonia nitrogen presence is an important indicator of water quality in environmental monitoring applications. In this paper, a high sensitivity sensor for monitoring ammonia nitrogen concentration in water using a tapered microfiber interferometer (MFI) as a sensor platform and a broad supercontinuum laser as the light source is realized. The MFI is fabricated to the waist diameter of 8 µm producing a strong interference pattern due to the coupling of the fundamental mode with the cladding mode. The MFI sensor is investigated for a low concentration of ammonia nitrogen in water in the wide wavelength range from 1500-1800 nm with a high-power signal provided by the supercontinuum source. The broad source allows optical sensing characteristics of the MFI to be evaluated at four different wavelengths (1505, 1605, 1705, and 1785 nm) upon exposure towards various ammonia nitrogen concentrations. The highest sensitivity of 0.099 nm/ppm that indicates the wavelength shift is observed at 1785 nm operating wavelength. The response is linear in the ammonia nitrogen range of 5-30 ppm with the best measurement resolution calculated to be 0.5 ppm. The low concentration ammonia nitrogen detected by the MFI in the unique infrared region reveals the potential application of this optical fiber-based sensor for rivers and drinking water monitoring.
Enhanced halophilic lipase secretion by Marinobacter litoralis SW-45 and its potential fatty acid esters release

Musa H, Hafiz Kasim F, Nagoor Gunny AA, Gopinath SCB, Azmier Ahmad M

J Basic Microbiol, 2019 Jan;59(1):87-100.
PMID: 30270443 DOI: 10.1002/jobm.201800382

An approach was made to enhance the halophilic lipase secretion by a newly isolated moderate halophilic Marinobacter litoralis SW-45, through the statistical optimization of Plackett-Burman (PB) experimental design and the Face Centered Central Composite Design (FCCCD). Initially, PB statistical design was used to screen the medium components and process parameters, while the One-factor-at-a-time technique was availed to find the optimum level of significant parameters. It was found that MgSO4 · 7H2 O, NaCl, agitation speed, FeSO4 · 7H2 O, yeast extract and KCl positively influence the halophilic lipase production, whereas temperature, carbon source (maltose), inducer (olive oil), inoculum size, and casein-peptone had a negative effect on enzyme production. The optimum level of halophilic lipase production was obtained at 3.0 g L-1 maltose, 1% (v/v) olive oil, 30 °C growth temperature and 4% inoculum volume (v/v). Further optimization by FCCCD was revealed 1.7 folds improvement in the halophilic lipase production from 0.603 U ml-1 to 1.0307 U ml-1 . Functional and biochemical characterizations displayed that the lipase was significantly active and stable in the pH ranges of 7.0-9.5, temperature (30-50 °C), and NaCl concentration (0-21%). The lipase was maximally active at pH 8.0, 12% (w/v) NaCl, and 50 °C temperature. Besides, M. litoralis SW-45 lipase was found to possess the promising industrial potential to be utilized as a biocatalyst for the esterification.
Speech and mastication difficulties following treatment by a "street dentist": A case of oral lipoma

Kamil WNWA, Zainal M, Omar AF, Jamaluddin TIBT, Ahmad MS

Spec Care Dentist, 2021 Jan;41(1):129-134.
PMID: 33128415 DOI: 10.1111/scd.12536

In this report, we present the case of a 68-year-old male patient with a complaint of mastication and speech limitations one year after the prescription of a fixed bridge and the construction of "connected" crowns by a "street dentist." A thorough oral examination revealed a multilobulated swelling in the right buccal mucosa that extended to the buccal sulcus. The lesion, which was first noticed as a small, asymptomatic swelling by the patient one year prior, seemed to have undergone enlargement since the prostheses were prescribed. The lesion was completely removed via surgical excision under general anesthesia. Histopathological examination of the excisional mass revealed mature adipocytes and features consistent with conventional or classic lipoma. This case highlights the importance of receiving dental treatment from a qualified professional, whose responsibilities include performing a thorough examination of the oral cavity during treatment planning and delivery, review appointments, and regular dental visits. Such investigation is important to allow for early disease detection and control, especially for patients with complex treatment needs as well as those who may present with asymptomatic and slow-growing lesions such as lipomas.
Computational-aided design: minimal peptide sequence to block dengue virus transmission into cells

Arumugam AC, Agharbaoui FE, Khazali AS, Yusof R, Abd Rahman N, Ahmad Fuaad AAH

J Biomol Struct Dyn, 2020 Dec 31.
PMID: 33382015 DOI: 10.1080/07391102.2020.1866074

Dengue virus (DV) infection is one of the main public health concerns, affecting approximately 390 million people worldwide, as reported by the World Health Organization. Yet, there is no antiviral treatment for DV infection. Therefore, the development of potent and nontoxic anti-DV, as a complement for the existing treatment strategies, is urgently needed. Herein, we investigate a series of small peptides inhibitors of DV antiviral activity targeting the entry process as the promising strategy to block DV infection. The peptides were designed based on our previously reported peptide sequence, DN58opt (TWWCFYFCRRHHPFWFFYRHN), to identify minimal effective inhibitory sequence through molecular docking and dynamics studies. The in silico designed peptides were synthesized using conventional Fmoc solid-phase peptide synthesis chemistry, purified by RP-HPLC and characterized using LCMS. Later, they were screened for their antiviral activity. One of the peptides, AC 001, was able to reduce about 40% of DV plaque formation. This observation correlates well with the molecular mechanics-Poisson-Boltzmann surface area (MM-PBSA) analysis - AC 001 showed the most favorable binding affinity through 60 ns simulations. Pairwise residue decomposition analysis has revealed four key residues that contributed to the binding of these peptides into the DV2 E protein pocket. This work identifies the minimal peptide sequence required to inhibit DV replication and explains the behavior observed on an atomic level using computational study.Communicated by Ramaswamy H. Sarma.
Fulltext Advanced Nanoscale Surface Characterization of CuO Nanoflowers for Significant Enhancement of Catalytic Properties

Khan MA, Nayan N, Shadiullah, Ahmad MK, Fhong SC, Tahir M, et al.

Molecules, 2021 May 04;26(9).
PMID: 34064537 DOI: 10.3390/molecules26092700

In this work, advanced nanoscale surface characterization of CuO Nanoflowers synthesized by controlled hydrothermal approach for significant enhancement of catalytic properties has been investigated. The CuO nanoflower samples were characterized by field-emission scanning electron microscopy (FE-SEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, high-resolution transmission electron microscopy (HR-TEM), selected-area electron diffraction (SAED), high-angular annular dark field scanning transmission electron microscopy (HAADF-STEM) with elemental mapping, energy dispersive spectroscopy (STEM-EDS) and UV-Vis spectroscopy techniques. The nanoscale analysis of the surface study of monodispersed individual CuO nanoflower confirmed the fine crystalline shaped morphology composed of ultrathin leaves, monoclinic structure and purified phase. The result of HR-TEM shows that the length of one ultrathin leaf of copper oxide nanoflower is about ~650-700 nm, base is about ~300.77 ± 30 nm and the average thickness of the tip of individual ultrathin leaf of copper oxide nanoflower is about ~10 ± 2 nm. Enhanced absorption of visible light ~850 nm and larger value of band gap energy (1.68 eV) have further supported that the as-grown material (CuO nanoflowers) is an active and well-designed surface morphology at the nanoscale level. Furthermore, significant enhancement of catalytic properties of copper oxide nanoflowers in the presence of H2O2 for the degradation of methylene blue (MB) with efficiency ~96.7% after 170 min was obtained. The results showed that the superb catalytic performance of well-fabricated CuO nanoflowers can open a new way for substantial applications of dye removal from wastewater and environment fields.
The effects of genotypes and media composition on callogenesis, regeneration and cell suspension culture of chamomile (Matricaria chamomilla L.)

Ahmad A, Tahir Ul Qamar M, Shoukat A, Aslam MM, Tariq M, Hakiman M, et al.

PeerJ, 2021;9:e11464.
PMID: 34113490 DOI: 10.7717/peerj.11464

Background: Chamomile is an important herb being used widely for medicinal purposes. Its multitherapeutic, cosmetic, and nutritional values have been established through years of traditional and scientific use and research. Increased use of medicinal plants necessitates rational use as well as sustainable production of such genetic resources. Plant in vitro micro-propagation poses unique opportunities for sustainable production of medicinal herbs, their regrowth and conservation. The present study aimed to investigate the effects of different explants, plant growth regulators (PGRs) combinations and media type on callogenesis, in vitro regeneration and cell suspension of six chamomile genotypes to enhance its sustainable production.
Methods: The shoot, lateral sprout, and leaf derived explants of six chamomile genotypes including Isfahan, Shiraz, Kazeron, Goral, Sharokashari and Presso were used for direct and indirect regeneration. For indirect regeneration various doses of NAA and kinetin were used to induce calli which were cultured on MS media containing PGRs for direct and indirect regeneration. Later, cell suspension was established and morphological characterization of CrO3 stained cells was carried out using microscopy.
Results and Discussion: Our findings revealed that the highest callus percentage and callus volume were observed from lateral sprouts and shoots of genotype Isfahan on MS medium containing 1 mg/L NAA and 1 mg/L kinetin. The in vitro regeneration was found to be genotype dependent while 77% and 77.5% was the highest percentage for indirect and direct regeneration, respectively. Additionally, the maximum shoot number (two shoots/explant) and shoot length (2.22 cm) were also observed in Isfahan genotype. Cell suspension culture showed the highest fresh weight (18.59 g) and dry weight (1.707 g) with 0.75 g inoculum of the callus derived from lateral sprouts cultured on MS medium. Microscopy of CrO3 stained cells was carried on each 3rd day for 27 days that revealed larger and spongier cells in the early days as compared to final days when the cell number was greater but cell size was smaller.
Conclusion: The callogenesis, organogenesis, and cell suspension culture of chamomile may be genotype dependent. Hence, optimization of media ingredients and culture conditions is of utmost importance for devising tissue culture based conservation strategy of any chamomile genotype and secondary metabolite production.
Fulltext Isolation, Structure Elucidation and In Silico Prediction of Potential Drug-Like Flavonoids from Onosma chitralicum Targeted towards Functionally Important Proteins of Drug-Resistant Bad Bugs

Khan SA, Khan SU, Fozia, Ullah N, Shah M, Ullah R, et al.

Molecules, 2021 Apr 02;26(7).
PMID: 33918531 DOI: 10.3390/molecules26072048

Admittedly, the disastrous emergence of drug resistance in prokaryotic and eukaryotic human pathogens has created an urgent need to develop novel chemotherapeutic agents. Onosma chitralicum is a source of traditional medicine with cooling, laxative, and anthelmintic effects. The objective of the current research was to analyze the biological potential of Onosma chitralicum, and to isolate and characterize the chemical constituents of the plant. The crude extracts of the plant prepared with different solvents, such as aqueous, hexane, chloroform, ethyl acetate, and butanol, were subjected to antimicrobial activities. Results corroborate that crude (methanol), EtoAc, and n-C6H14 fractions were more active against bacterial strains. Among these fractions, the EtoAc fraction was found more potent. The EtoAc fraction was the most active against the selected microbes, which was subjected to successive column chromatography, and the resultant compounds 1 to 7 were isolated. Different techniques, such as UV, IR, and NMR, were used to characterize the structures of the isolated compounds 1-7. All the isolated pure compounds (1-7) were tested for their antimicrobial potential. Compounds 1 (4',8-dimethoxy-7-hydroxyisoflavone), 6 (5,3',3-trihydroxy-7,4'-dimethoxyflavanone), and 7 (5',7,8-trihydroxy-6,3',4'-trimethoxyflavanone) were found to be more active against Staphylococcus aureus and Salmonella Typhi. Compound 1 inhibited S. typhi and S. aureus to 10 ± 0.21 mm and 10 ± 0.45 mm, whereas compound 6 showed inhibition to 10 ± 0.77 mm and 9 ± 0.20 mm, respectively. Compound 7 inhibited S. aureus to 6 ± 0.36 mm. Compounds 6 and 7 showed significant antibacterial potential, and the structure-activity relationship also justifies their binding to the bacterial enzymes, i.e., beta-hydroxyacyl dehydratase (HadAB complex) and tyrosyl-tRNA synthetase. Both bacterial enzymes are potential drug targets. Further, the isolated compounds were found to be active against the tested fungal strains. Whereas docking identified compound 7, the best binder to the lanosterol 14α-demethylase (an essential fungal cell membrane synthesizing enzyme), reported as an antifungal fluconazole binding enzyme. Based on our isolation-linked preliminary structure-activity relationship (SAR) data, we conclude that O. chitralicum can be a good source of natural compounds for drug development against some potential enzyme targets.
Fulltext The Relationship of Orofacial Pain and Dental Health Status and Oral Health Behaviours in Facial Burn Patients

Chaudhary FA, Ahmad B, Javed MQ, Yakub SS, Arjumand B, Khan AM, et al.

Pain Res Manag, 2021;2021:5512755.
PMID: 34055118 DOI: 10.1155/2021/5512755

This study aims to examine the association of orofacial pain and oral health status and oral health behaviours in facial burn patients. The participants in this cross-sectional study were randomly recruited from the Burn Care Center, Institute of Medical Sciences, Islamabad, Pakistan. An intraoral evaluation was carried out to record the DMFT and OHI-S. A self-administered questionnaire was used to collect information on sociodemographic status, brushing frequency, and dental visits. Orofacial pain during mandibular movement was assessed using the Visual Analogue Scale (VAS). Psychological status was assessed using the Generalized Anxiety Disorder Scale and Impact of Events Scale. ANOVA and simple and multiple linear regression tests were used to analyse the data. From the 90 facial burn patients included, the majority were below 34 years of age, female, single or divorced, and unemployed. The mean DMFT was 10.7, and 71% had poor oral hygiene. 56% of the participants had moderate-to-severe anxiety, and 68% had posttraumatic stress disorder. 53% of the participants had moderate-to-severe pain during mouth opening or moving the mandible with a mean score of 41.5. Analyses showed that orofacial pain was associated with less frequent brushing, irregular dental visits, greater DMFT score, and more plaque accumulation (OHI-S). It was also associated with employment status, the severity of a burn, anxiety, and stress. The treatment and management of dental and oral conditions in burn patients need judicious balance in controlling and accurate assessment of the pain and improving psychological problems in burn patients.

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links