Heat exchanger performance degrades rapidly during operation due to formation of deposits on heat transfer surfaces which ultimately reduces service life of the equipment. Due to scaling, product deteriorates which causes lack of proper heating. Chemistry of milk scaling is qualitatively understood and the mathematical models for fouling at low temperatures have been produced but the behavior of systems at ultra high temperature processing has to be studied further to understand in depth. In diversified field, the effect of whey protein fouling along with pressure drop in heat exchangers were conducted by many researchers. Adding additives, treatment of heat exchanger surfaces and changing of heat exchanger configurations are notable areas of investigation in milk fouling. The present review highlighted information about previous work on fouling, influencing parameters of fouling and its mitigation approach and ends up with recommendations for retardation of milk fouling and necessary measures to perform the task.
Mung bean has been traditionally used to alleviate heat stress. This effect may be contributed by the presence of flavonoids and γ-aminobutyric acid (GABA). On the other hand, fermentation and germination have been practised to enhance the nutritional and antioxidant properties of certain food products. The main focus of current study was to compare the antistress effect of none-process, fermented and germinated mung bean extracts. Acute and chronic restraint stresses were observed to promote the elevation of serum biochemical markers including cholesterol, triglyceride, total protein, liver enzymes, and glucose. Chronic cold restraint stress was observed to increase the adrenal gland weight, brain 5-hydroxytryptamine (5-HT), and malondialdehyde (MDA) level while reducing brain antioxidant enzyme level. However, these parameters were found reverted in mice treated with diazepam, high concentration of fermented mung bean and high concentration of germinated mung bean. Moreover, enhanced level of antioxidant on the chronic stress mice was observed in fermented and germinated mung bean treated groups. In comparison between germinated and fermented mung bean, fermented mung bean always showed better antistress and antioxidant effects throughout this study.
The ethanol extract of B. javanica seed was fractionated with solvents of different polarities and tested for antioxidant activities by several assays including DPPH radical scavenging activity, ferric reducing antioxidant power (FRAP), ferrous ion chelating activity (FCA), and nitric oxide radical scavenging activity (NORSA) along with their polyphenolic contents. Antidiabetic activity was evaluated both in vitro and in vivo using a glycogen phosphorylase α (GPα) inhibition assay and oral glucose tolerance test (OGTT) in nondiabetic rats. The ethyl acetate fraction (EAF), rich in tannin, exhibited the strongest antioxidant activities to DPPH, FRAP, and NORSA, except for FCA. The EAF also exerted a dose-depended inhibition of GPα (IC50 = 0.75 mg/ml). Further evaluation of hypoglycemic effect on OGGT indicated that rats treated with EAF (125 mg/kg bw) showed a 39.91% decrease (P < 0.05) in blood glucose levels at 30 min, and continuous fall (P < 0.05) of 28.89% and 20.29% was observed in the following hours (60 and 90 min) compared to the normal control during OGTT. The EAF was applied to polyamide column chromatography, and the resulting tannin-free fraction was tested for both GPα inhibition and antioxidant (DPPH only) activity. The GP α inhibitory activity was retained, while antioxidant activity was lost (4.6-fold) after tannin removal. These results concluded that the GPα inhibitory activity initially detected was primarily due to the compounds other than tannins, whereas antioxidant activity was mainly due to the tannins.
The success of printing technology in the electronics industry primarily depends on the availability of metal printing ink. Various types of commercially available metal ink are widely used in different industries such as the solar cell, radio frequency identification (RFID) and light emitting diode (LED) industries, with limited usage in semiconductor packaging. The use of printed ink in semiconductor IC packaging is limited by several factors such as poor electrical performance and mechanical strength. Poor adhesion of the printed metal track to the epoxy molding compound is another critical factor that has caused a decline in interest in the application of printing technology to the semiconductor industry. In this study, two different groups of adhesion promoters, based on metal and polymer groups, were used to promote adhesion between the printed ink and the epoxy molding substrate. The experimental data show that silver ink with a metal oxide adhesion promoter adheres better than silver ink with a polymer adhesion promoter. This result can be explained by the hydroxyl bonding between the metal oxide promoter and the silane grouping agent on the epoxy substrate, which contributes a greater adhesion strength compared to the polymer adhesion promoter. Hypotheses of the physical and chemical functions of both adhesion promoters are described in detail.
Matched MeSH terms: Metals/chemistry; Oxides/chemistry; Silanes/chemistry; Silver Compounds/chemistry*; Metal Nanoparticles/chemistry*
Bleaching treatment of kenaf fiber was performed in alkaline medium containing hydrogen peroxide solution maintained at pH 11 and 80 °C for 60 min. The bleached kenaf fiber was analyzed using Fourier Transform Infrared (FTIR) and X-ray Diffraction (XRD) analysis. The bleached kenaf fiber was then compounded with poly-(lactic acid) (PLA) via a melt blending method. The mechanical (tensile, flexural and impact) performance of the product was tested. The fiber treatment improved the mechanical properties of PLA/bleached kenaf fiber composites. Scanning electron micrograph (SEM) morphological analysis showed improvement of the interfacial adhesion between the fiber surface and polymer matrix.
Underutilized vegetables are currently studied not only for their nutrient values but also for their health-promoting components for protection against chronic diseases. The present study was performed to evaluate chemical compositions and antioxidant properties of underutilized vegetable palm hearts, namely, lalis (Plectocomiopsis geminiflora) and pantu (Eugeissona insignis). Additionally, the vegetable extracts were evaluated for their activities in the inhibition of digestive enzymes and effects on insulin secretion using BRIN BD11 pancreatic cell lines. Both vegetables contain valuable sources of dietary fiber, potassium, and zinc. For the first time, the phenolic compounds of the vegetables were identified and quantified using HPLC-DAD and LC-ESI-MS. Appreciable amounts of chlorogenic acid were found in the studied vegetables. The sample extracts exhibited potential antioxidant capacities through chemical and biological in vitro assays. High inhibition of α-amylase activity (>50%) was found from the extracts. Thus, it was suggested the vegetable consumption could fulfill the nutrient requirements among local communities.
In this study, regenerated cellulose/halloysites (RC/HNT) nanocomposites with different nanofillers loading were fabricated by dissolving the cellulose in 1-ethyl-3-methylimidazolium chloride (EMIMCl) ionic liquid. The films were prepared via solution casting method and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The mechanical properties were investigated by tensile testing. It clearly displayed a good enhancement of both tensile strength and Young's modulus with HNT loading up to 5 wt%. As the HNT loadings increased to 5 wt%, the thermal behaviour and water resistance rate was also increased. The TEM and SEM images also depicted even dispersion of the HNT and a good intertubular interaction between the HNT and the cellulose matrix.
This study aims to investigate the impacts of ethyl lactate (EL) based Fenton treatment on soil quality for polycyclic aromatic hydrocarbons (PAHs)-contaminated soils. Accumulation of oxygenated-polycyclic aromatic hydrocarbons (oxy-PAHs) was observed, but quantitative measurement on the most abundant compound 9,10-anthraquinone (ATQ) showed lower accumulation of the compound than that reported for ethanol (ET) based Fenton treatment. In general, as compared to conventional water (CW) based Fenton treatment, the EL based Fenton treatment exerted either a lower or higher negative impact on soil physicochemical properties depending on the property type and shared the main disadvantage of reduced soil pH. For revegetation, EL based Fenton treatment was most appropriately adopted for soil with native pH >/~ 6.2 in order to obtain a final soil pH >/~ 4.9 subject to the soil buffering capacity.
The aim of the study was to determine the effect of different types of sugar on the formation of heterocyclic amines (HCA) in marinated grilled chicken. Chicken breast samples were marinated with table sugar, brown sugar, and honey for 24h at 4 °C. The internal temperature, weight loss, free amino acids, sugars, and HCA were determined. The concentrations of all types of HCA (except IQx) in samples that were marinated with table sugar were significantly higher (p<0.006) than brown sugar; whereas those were marinated with honey had the lowest HCA concentrations. A substantial reduction in the concentration of MeIQ, PhIP, DiMeIQx, IQ, IQx, and norharman was achieved in chicken marinated with honey. A correlation study indicated that adding honey into the recipe retarded the formation of most HCA (MeIQ, DiMeIQx, IQ, IQx, norharman, and harman), whereas table sugars enhanced the formation of all HCA except norharman, harman, and AαC.
We report significant enhancements in Er(3+) luminescence as well as in Raman intensity in silver nanoparticles embedded zinc-tellurite glass. Surface enhanced Raman scattering effect is highlighted for the first time in tellurite glass containing silver NPs resulting in an enhanced Raman signal (~10 times). SAED manifest the growth of Ag(0) nanoparticles along the (111) and (200) crystallographic planes having average diameter in the range 14-36 nm. Surface plasmon resonance bands are observed in the range 484-551 nm. Furthermore, four prominent photoluminescence bands undergo significant enhancements up to 3 times. The enhancement is majorly attributed to the local field effect of silver NPs.
Matched MeSH terms: Glass/chemistry*; Silver/chemistry*; Tellurium/chemistry*; Zinc/chemistry*; Metal Nanoparticles/chemistry*
Dendrobium sonia-28 is an important ornamental orchid in the Malaysian flower industry. However, the genus faces both low germination rates and the risk of producing heterozygous progenies. Cryopreservation is currently the favoured long-term storage method for orchids with propagation problems. Vitrification, a frequently used cryopreservation technique, involves the application of pretreatments and cryoprotectants to protect and recover explants during and after storage in liquid nitrogen. However, cryopreservation may cause osmotic injuries and toxicity to cryopreserved explants from the use of highly concentrated additives, and cellular injuries from thawing, devitrification and ice formation. Reactive oxygen species (ROS), occurring during dehydration and cryopreservation, may also cause membrane damage. Plants possess efficient antioxidant systems such as the superoxide dismutase (SOD) and catalase (CAT) enzymes to scavenge ROS during low temperature stress. In this study, protocorm-like bodies (PLBs) of Dendrobium sonia-28 were assayed for the total protein content, and both SOD and CAT activities, at each stage of a vitrification exercise to observe for deleterious stages in the protocol. The results indicated that cryopreserved PLBs of Dendrobium sonia-28 underwent excessive post-thawing oxidative stress due to decreased levels of the CAT enzyme at the post-thawing recovery stage, which contributed to the poor survival rates of the cryopreserved PLBs.
The ethyl acetate and methanol bark extracts of Melicope glabra were evaluated for their antioxidant capacities by 1,1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging activity and β-carotene bleaching/linoleic acid system. Both extracts exhibited strong inhibition against the DPPH radical (IC50 values of 24.81 and 13.01 μg ml(-1), respectively) and strong antioxidant activity in β-carotene bleaching assay. Both samples were found to have high phenolic content with values of 39 and 44 mg GAE/g as indicated by Follin-Ciocalteau's reagent. Antioxidant TLC assay-guided isolation on the methanol extract led to the isolation of a new pyranocoumarin, glabranin (1), umbelliferone (2), scopoletin (3) and sesamin (4), and their structures were determined by spectroscopy. Compounds (1-3) showed significant activities on DPPH free radical with the IC50 of 240.20, 810.02 and 413.19 μg ml(-1), respectively. However, in β-carotene bleaching assay, sesamin (4) showed higher inhibitory activity (1 mg ml(-1), 95%) than glabranin (1) (1 mg ml(-1), 74%), whilst umbelliferone (2) and scopoletin (3) were slightly pro-oxidant.
Activated carbons can be produced from different precursors, including coals of different ranks, and lignocellulosic materials, by physical or chemical activation processes. The objective of this paper is to characterize oil-palm shells, as a biomass byproduct from palm-oil mills which were converted into activated carbons by nitrogen pyrolysis followed by CO2 activation. The effects of no holding peak pyrolysis temperature on the physical characteristics of the activated carbons are studied. The BET surface area of the activated carbon is investigated using N2 adsorption at 77 K with selected temperatures of 500, 600, and 700°C. These pyrolysis conditions for preparing the activated carbons are found to yield higher BET surface area at a pyrolysis temperature of 700°C compared to selected commercial activated carbon. The activated carbons thus result in well-developed porosities and predominantly microporosities. By using this activation method, significant improvement can be obtained in the surface characteristics of the activated carbons. Thus this study shows that the preparation time can be shortened while better results of activated carbon can be produced.
A series of hitherto unreported pyrido-pyrimidine-2-ones/pyrimidine-2-thiones were synthesized under microwave assisted solvent free reaction conditions in excellent yields and evaluated in vitro for their acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) enzymes inhibitory activity. Among the pyridopyrimidine derivatives, 7e and 7l displayed 2.5- and 1.5-fold higher enzyme inhibitory activities against AChE as compared to standard drug, galanthamine, with IC50 of 0.80 and 1.37 μM, respectively. Interestingly, all the compounds except 6k, 7j and 7k displayed higher inhibitory potential against BChE enzyme in comparison to standard with IC50 ranging from 1.18 to 18.90 μM. Molecular modeling simulations of 7e and 7l was performed using three-dimensional structure of Torpedo californica AChE (TcAChE) and human butyrylcholinesterase (hBChE) enzymes to disclose binding interaction and orientation of these molecule into the active site gorge of respective receptors.
Synthesis of ZnO-Ag heterostructure nanoparticles was carried out by a precipitation method with cellulose nanocrystals (CNCs) as a stabilizer for antimicrobial and thermal studies. ZnO-Ag nanoparticles were obtained from various weight percentages of added AgNO₃ relative to Zn precursors for evaluating the best composition with enhanced functional properties. The ZnO-Ag/CNCs samples were characterized systematically by TEM, XRD, UV, TGA and DTG. From the TEM studies we observed that ZnO-Ag heterostructure nanoparticles have spherical shapes with size diameters in a 9-35 nm range. The antibacterial activities of samples were assessed against the bacterial species Salmonella choleraesuis and Staphylococcus aureus. The CNC-stabilized ZnO-Ag exhibited greater bactericidal activity compared to cellulose-free ZnO-Ag heterostructure nanoparticles of the same particle size. The incorporation of ZnO-Ag hetreostructure nanoparticles significantly increased the thermal stability of cellulose nanocrystals.
The presence of endocrine disruptors in source water is of great concern because of their suspected adverse effects on humans, even when present at very low levels. As the main source of potable water supply, rivers in Malaysia are highly susceptible to contamination by various endocrine disruptors originating from anthropogenic activities. In this study, the contamination levels of 1,1,1-trichloro-2,2-bis (4-chlorophenyl) ethane (DDT) and its metabolites and di-(2-ethylhexyl) phthalate (DEHP) in rivers of Selangor were examined using gas chromatography-mass spectrometry. Samples were collected from sites representing source water for 18 drinking water treatment plants in Selangor between July 2008 and July 2009. DDT and its metabolites were detected in only 14% of the 192 samples analysed at levels ranging from 0.6 to 14.6 ng/L. Meanwhile DEHP was detected in 96.8% of the samples at levels ranging from below quantitation level (18 ng/L) to 970 ng/L. The detected levels of DDTs and DEHP were lower than the WHO and Malaysian Guidelines for Drinking Water Quality. Data obtained from this study should also serve as a reference point for future surveillance on these endocrine disruptors.
In this work, we successfully isolated microcrystalline cellulose (MCC) from oil palm empty fruit bunch (OPEFB) fiber-total chlorine free (TCF) pulp using acid hydrolysis method. TCF pulp bleaching carried out using an oxygen-ozone-hydrogen peroxide bleaching sequence. Fourier transform infrared (FT-IR) spectroscopy indicates that acid hydrolysis does not affect the chemical structure of the cellulosic fragments. The morphology of the hydrolyzed MCC was investigated using scanning electron microscopy (SEM), showing a compact structure and a rough surface. Furthermore, atomic force microscopy (AFM) image of the surface indicates the presence of spherical features. X-ray diffraction (XRD) shows that the MCC produced is a cellulose-I polymorph, with 87% crystallinity. The MCC obtained from OPEFB-pulp is shown to have a good thermal stability. The potential for a range of applications such as green nano biocomposites reinforced with this form of MCC and pharmaceutical tableting material is discussed.
Phytochemical investigation on the stem bark of Shorea maxwelliana yielded five oligostilbenoids identified as α-viniferin (1), maximol A (2), vaticanol A (3), suffruticosol A (4) and vaticanol G (5). Chemotaxonomy of isolated compounds was discussed briefly. Major compounds were tested for neurotoxic and cytotoxic activities. Neurotoxicity for all tested compounds did not pose any toxic effect against cultured cell (cell viability range ±100-94%). Compounds 2-5 possessed active cyctotoxic activity against HL60 cell line with IC50 values range of 2.7-78 µg mL(-1).
A new oligostilbenoid tetramer, malaysianol B (1), was isolated from the acetone extract of the stem bark of Dryobalanops lanceolata along with seven oligostilbenoids tetramers; hopeaphenol (2), stenophyllol A (3), nepalensinol B (4), vaticanol B (5) and C (6), upunaphenol D (7), and flexuosol A (8). The structures of the isolated compounds were established on the basis of their spectroscopic data evidence. The antibacterial activity of the isolated compounds was evaluated using resazurin microtitre-plate assay.
Preliminary investigations on 14 plant extracts (obtained by ethanolic and aqueous extraction) identified those having high antioxidant and a significant total phenolic content. Antihyperglycemic, α-amylase and α-glucosidase inhibition activities were also observed. A correlation between the antihyperglycemic activity, total phenolic content and antioxidant (DPPH scavenging) activity was established. To further substantiate these findings, the possibility of tannins binding non-specifically to enzymes and thus contributing to the antihyperglycemic activity was also investigated. Our study clearly indicated that the antihyperglycemic activity observed in the plant extracts was indeed not due to non-specific tannin absorption.