Membrane technologies have received high interest in the separation gas mixture. The
ceramic inorganic membranes have possessed high permeability, excellent thermal,
chemical and mechanical stabilities compared to conventional polymer membranes.
This work presents the fabrication of silica ceramic membrane by sol dip-coating
method. The tubular support was dipped into the solution of tetrethylorthosilicate
(TEOS), distilled water and ethanol with the addition of nitric acid as a catalyst. The
fabricated silica membrane was then characterized by (Field Emission Scanning
Electron Microscope) FESEM and (Fourier transform infrared spectroscopy) FTIR to
determine structural and chemical properties at different dipping number. FESEM
images indicate that the silica has been deposited on the surface fabricated ceramic
membrane and penetrate into the pore walls. However, number of dipping did not
affect the intensity peak of FTIR analysis.
Platybaetis bishopi Müller-Liebenau, 1980 was originally described from Malaysia only at the larval stage. We provide the first description of the imaginal stage of P. bishopi based on materials from Thailand. The imago of this species can be separated from the known species by coloration of abdominal terga and coloration of wings. A new species, Platybaetis nayokensis sp. nov., is described based on male and female imagos and larvae from Thailand. The larva of this species is mainly distinguished by medium acute spines on the posterior margin of the abdominal terga and two apical setae on the glossa, which seem to be shorter than in other species. The imago can be separated by the abdominal color pattern. The larva of this genus is adapted to live on wet rocks projecting out of water; it prefers large stones near small waterfalls or areas between two large rocks in running water.
The main aim of this study was to evaluate the suitability of sulfonated alginate as a modifying agent to enhance the hemocompatibility of self-fabricated polyethersulfone (PES) hollow fiber membrane for blood detoxification. Sodium alginate was sulfonated with a degree of 0.6 and immobilized on the membrane via surface amination and using glutaraldehyde as cross-linking agent. Coating layer not only improved the membrane surface hydrophilicity, but also induced -39.2 mV negative charges on the surface. Water permeability of the modified membrane was enhanced from 67 to 95 L/m2·h·bar and flux recovery ratio increased more than 2-fold. Furthermore, the modified membrane presented higher platelet adhesion resistance (reduced by more than 90%) and prolonged coagulation time (35 s for APTT and 14 s for PT) in comparison with the pristine PES hollow fiber membrane, which verified the improved anti-thrombogenicity of the modified membrane. On the other hand, obtained membrane after 3 h coating could remove up-to 60% of the uremic toxins. According to the obtained data, sulfonated alginate can be a promising modifying agent for the future blood-contacting membrane and specially blood purification issues.
The volume of waste generated from surface coating industries is of global concern. The disposal of this waste in the form of effluent has put enormous pressure on land and also poses as a health hazard when it leaches into soil and underground water. The study aims to examine the utilization of vinyl acetate effluents from water based paint factories as an admixture in concrete. Concrete specimens containing 0%, 2.5%, 5% and 10% of vinyl acetate effluents by weight of cement were prepared. The specimens were tested for drying shrinkage for 28 days and porosity was tested using mercury intrusion porosimetry. Findings show that concrete containing various proportions of vinyl acetate effluents manifests higher shrinkage behaviour compared to the control item. An investigation of pore size distribution reveals that polymer effluents have particles size larger than 50 nm which are categorize as macroporous in accordance to IUPAC classification. It can be concluded that adding polymer vinyl acetate effluents affects concrete deformation due to the condition of its pore structures. The utilization of this material may provide beneficial effect in terms of the durability performance of concrete and minimize environmental pollution.
In the perspective of recent bauxite mining in Malaysia, this review aims to identify the potential
environmental and health impacts on miners and surrounding communities. The environmental issues of
bauxite mining include, air, water and soil pollution due to bauxite dust; leaching of bauxite into water
sources resulting in reduced soil fertility as well as affecting agricultural food products and aquatic life.
Bauxite occupational exposure affects the health of miners, and has negative consequences on the health of
surrounding communities, such as increased respiratory symptoms, contamination of drinking water, other
potential health risks from ingestion of bauxite and heavy metals, including noise-induced hearing loss and
mental stress. This review discusses the processes of bauxite mining, its constituents and residual trace
elements, and their impact on the environment and health of exposed workers and communities. It also
explores the Malaysian legal requirements and standards of occupational exposure to bauxite.
The problem of steady, laminar natural convection in a discretely heated and cooled square cavity filled by an alumina/water nanofluid with a centered heat-conducting solid block under the effects of inclined uniform magnetic field, Brownian diffusion and thermophoresis is studied numerically by using the finite difference method. Isothermal heaters and coolers are placed along the vertical walls and the bottom horizontal wall, while the upper horizontal wall is kept adiabatic. Water-based nanofluids with alumina nanoparticles are chosen for investigation. The governing parameters of this study are the Rayleigh number (103 ≤ Ra ≤ 106), the Hartmann number (0 ≤ Ha ≤ 50), thermal conductivity ratio (0.28 ≤ k w ≤ 16), centered solid block size (0.1 ≤ D ≤ 0.7) and the nanoparticles volume fraction (0 ≤ ϕ ≤ 0.04). The developed computational code is validated comprehensively using the grid independency test and numerical and experimental data of other authors. The obtained results reveal that the effects of the thermal conductivity ratio, centered solid block size and the nanoparticles volume fraction are non-linear for the heat transfer rate. Therefore, it is possible to find optimal parameters for the heat transfer enhancement in dependence on the considered system. Moreover, high values of the Rayleigh number and nanoparticles volume fraction characterize homogeneous distributions of nanoparticles inside the cavity. High concentration of nanoparticles can be found near the centered solid block where thermal plumes from the local heaters interact.
Recent research in underwater wireless sensor networks (UWSNs) has gained the attention of researchers in academia and industry for a number of applications. They include disaster and earthquake prediction, water quality and environment monitoring, leakage and mine detection, military surveillance and underwater navigation. However, the aquatic medium is associated with a number of limitations and challenges: long multipath delay, high interference and noise, harsh environment, low bandwidth and limited battery life of the sensor nodes. These challenges demand research techniques and strategies to be overcome in an efficient and effective fashion. The design of routing protocols for UWSNs is one of the promising solutions to cope with these challenges. This paper presents a survey of the routing protocols for UWSNs. For the ease of description, the addressed routing protocols are classified into two groups: localization-based and localization-free protocols. These groups are further subdivided according to the problems they address or the major parameters they consider during routing. Unlike the existing surveys, this survey considers only the latest and state-of-the-art routing protocols. In addition, every protocol is described in terms of its routing strategy and the problem it addresses and solves. The merit(s) of each protocol is (are) highlighted along with the cost. A description of the protocols in this fashion has a number of advantages for researchers, as compared to the existing surveys. Firstly, the description of the routing strategy of each protocol makes its routing operation easily understandable. Secondly, the demerit(s) of a protocol provides (provide) insight into overcoming its flaw(s) in future investigation. This, in turn, leads to the foundation of new protocols that are more intelligent, robust and efficient with respect to the desired parameters. Thirdly, a protocol can be selected for the appropriate application based on its described merit(s). Finally, open challenges and research directions are presented for future investigation.
Landfill leachate imposes a huge problem to the environment and human beings. This work focused on bioconversion of leachate to acetic and butyric acids by Clostridium butyricum NCIMB 7423. A continuous stirred tank reactor (CSTR) was applied and connected to fabricate membrane module. The leachate was collected from Pulau Burung Landfill Site (PBLS), Nibong Tebal, Penang. Prior to fermentation, leachate was treated to remove volatile fatty acid and adjusted to meet the minimum requirement of nutrients for anaerobic fermentation. Synthetic medium fermentation acts as a benchmark to the leachate fermentation. The outcomes indicated that the yield of acetic acid and butyric acid in synthetic medium fermentation was 0.70 g/L and 0.71 g/L, respectively. Meanwhile, leachate fermentation showed that the yield of acetic and butyric acid was 0.93 g/L and 1.86 g/L, respectively. High production of acetic and butyric acid showed that leachate fermentation is a green alternative to produce a cleaner product.
Forest ownership is considered as a vital aspect for sustainable management of forest and its associated biodiversity. The Global Forest Resources Assessment 2015 reported that privately owned forest area are increasing on a global scale, but deforestation was found very active in privately owned hill forest areas of Malaysia. Penang State was purposively chosen as it has been experiencing rapid and radical changes due to urban expansion over the last three decades. In this study, analyses of land-use changes were done by PCI Geomatica using Landsat images from 1991 to 2015, future trends of land-use change were assessed using EXCEL forecast function, and its impact on the surrounding environment were conducted by reviewing already published articles on changing environment of the study area. This study revealed an annual deforestation rate of 1.4% in Penang Island since 1991. Trend analysis forecasted a forest area smaller than the current forest reserves by the year 2039. Impact analysis revealed a rapid biodiversity loss with increasing landslides, mudflows, water pollution, flash flood, and health hazard. An immediate ban over hill-land development is crucial for overall environmental safety.
Neat cellulose acetate (CA) and CA/polysulfone (PSf) blend ultrafiltration membranes in the presence of polyvinylpyrrolidone as a pore former were prepared via a phase inversion technique. The prepared membranes were characterized by Fourier transform infrared, scanning electron microscopy, mechanical strength, water content, porosity, permeate flux and heavy metals (Pb2+, Cd2+, Zn2+ and Ni2+) rejection to comprehend the impact of polymer blend composition and additive on the properties of the modified membranes. The water flux expanded by increasing of PSf content in the polymer composition. CA/PSf (60/40) had the highest flux among prepared membranes. Prepared blend membranes were able to remove heavy metals from water in the following order: Pb2+ > Cd2+ > Zn2+ > Ni2+. The CA/PSf (80/20) blend membrane had great performance among prepared membranes due to the high heavy metals removal and permeate flux.
This article investigates heat transfer enhancement in free convection flow of Maxwell nanofluids with carbon nanotubes (CNTs) over a vertically static plate with constant wall temperature. Two kinds of CNTs i.e. single walls carbon nanotubes (SWCNTs) and multiple walls carbon nanotubes (MWCNTs) are suspended in four different types of base liquids (Kerosene oil, Engine oil, water and ethylene glycol). Kerosene oil-based nanofluids are given a special consideration due to their higher thermal conductivities, unique properties and applications. The problem is modelled in terms of PDE's with initial and boundary conditions. Some relevant non-dimensional variables are inserted in order to transmute the governing problem into dimensionless form. The resulting problem is solved via Laplace transform technique and exact solutions for velocity, shear stress and temperature are acquired. These solutions are significantly controlled by the variations of parameters including the relaxation time, Prandtl number, Grashof number and nanoparticles volume fraction. Velocity and temperature increases with elevation in Grashof number while Shear stress minimizes with increasing Maxwell parameter. A comparison between SWCNTs and MWCNTs in each case is made. Moreover, a graph showing the comparison amongst four different types of nanofluids for both CNTs is also plotted.
In the last 10 years, the microbial fuel cell (MFC) has been extensively studied worldwide to extract energy from wastewater via electricity generation. More recently, a merged technique of embedding MFC into a constructed wetland (CW) has been developed and appears to be increasingly investigated. The driving force to integrate these two technologies lies in the fact that CWs naturally possess a redox gradient (depending on flow direction and wetland depth), which is required by MFCs as anaerobic anode and aerobic cathode chambers. No doubt, the integration of MFC with a CW will upgrade the CW to allow it to be used for wastewater treatment and, simultaneously, electricity generation, making CWs more sustainable and environmentally friendly. Currently, published work shows that India, China, Ireland, Spain, Germany and Malaysia are involved in the development of this technology although it is in its infant stage and many technical issues are faced on system configuration, operation and maximisation of electricity production. This paper aims to provide an updated review and analysis of the CW-MFC development. Focuses are placed on the experience gained so far from different researchers in the literature and further research directions and proposals are discussed in great detail.
Water-immiscible substrate, diesel, was supplied as the main substrate in the fermentation of Pseudomonas aeruginosa USM-AR2 producing rhamnolipid biosurfactant, in a stirred tank bioreactor. In addition to the typical gas-aqueous system, this system includes gas-hydrocarbon-aqueous phases and the presence of surfactant (rhamnolipid) in the fermentation broth. The effect of diesel dispersion on volumetric oxygen transfer coefficient, k L a, and thus oxygen transfer, was evaluated at different agitations of 400, 500 and 600 rpm. The oxygen transfer in this oil-water-surfactant system was shown to be affected by different oil dispersion at those agitation rates. The highest diesel dispersion was obtained at 500 rpm or impeller tip speed of 1.31 m/s, compared to 400 and 600 rpm, which led to the highest k L a, growth and rhamnolipid production by P. aeruginosa USM-AR2. This showed the highest substrate mixing and homogenization at this agitation speed that led to the efficient substrate utilization by the cells. The oxygen uptake rate of P. aeruginosa USM-AR2 was 5.55 mmol/L/h, which showed that even the lowest k L a (48.21 h-1) and hence OTR (57.71 mmol/L/h) obtained at 400 rpm was sufficient to fulfill the oxygen demand of the cells. The effect of rhamnolipid concentration on k L a showed that k L a increased as rhamnolipid concentration increased to 0.6 g/L before reaching a plateau. This trend was similar for all agitation rates of 400, 500 and 600 rpm, which might be due to the increase in the resistance to oxygen transfer (k L decrease) and the increase in the specific interfacial area (a).
Thorium is a fertile material that can undergo transmutation for it to become a fissile material,
uranium-233. The fissile material can go through a fission process in order to generate heat energy
and eventually electricity. Most nuclear reactors use uranium as their fission source. The use of
thorium as nuclear fuel has been only investigated for few types of reactors such as a high, temperature
gas reactor (HTGR), fast breeder reactor, light water reactor (LWR) and heavy water reactor
(HWR). For research reactors specifically, there are limited academic publications related to the
la,test u.se of thorium. Hence, the main, interest, of this work is to compile and review the latest
academic publications related to the active use of thorium, for research reactors in particular. The
reviewed studies have been, divided into two categories which are experimented and simulation projects.
The experimental projects are a,bold the ongoing thorium fuel tests that have been carried out. in an
actual, research reactor. On the hand, the simulation work: is related to the computational analysis
performed in predicting the neutronic behaviour of thorium based fuel in research reactors. The
experimented study of thorium is currently active for the KAMINI research reactor. Additionally, most,
simulation works focus on finding criticality and neutron spectra.
Adzuki bean is high in protein and fiber with a potential to be used as meat extender and fat replacer in the meat product. Replacement of both the corn flour and fat with different percentages of adzuki beans flour (ABF) has successfully produced acceptable reduced fat meatballs. Meatballs with 100% (w/w) ABF replacement exhibited highest cooking yield and higher moisture content compared to meatballs without the flour, which indicates its ability to bind water. Increasing the ABF content also increased the hardness and chewiness of the meatballs, whilst decreasing their lightness and yellowness. Replacing the corn flour and fat contents with ABF has obviously decreased the fat and calorie contents of the meatballs, yet their protein and carbohydrate contents remained the same compared to control. The sensory test revealed that meatball samples with 25% (w/w) and 50% (w/w) ABF showed no significant difference compared to control but received highest overall acceptability among the panelists. This indicates that replacement of corn flour and fat with ABF especially at 50% (w/w) in the production of reduced fat meatballs resulted with better physicochemical properties and acceptable sensory compared to original meatballs.
Dengue incidence has grown dramatically in recent decades and become a global incidence especially in the
urban area. Ministry of Health (MOH) Malaysia reported that the number of dengue cases since January
2014 until June 2014 was 38. 411 cases which was higher compared to the number reported in year 2013 (10,
910 cases). The objective of the study was to determine the knowledge and preventive practices of dengue
among residents in Flat Pandan Indah, Ampang Selangor. A cross sectional study design with convenience
sampling method was adopted in this study. A total of 298 respondents living in Flat Pandan Indah were
recruited based on the inclusion criteria. A validated questionnaire that measures knowledge and preventive
practices of dengue was completed by respondents. More than half of the respondents had scored 61.7%
with good knowledge regarding dengue. However, 50.3% of the respondents had a limited extent of dengue
practice. Almost all of the respondents (95.6%) reported that television or radio as the main source for
information on dengue. The common preventive measures used by the respondents were cleaning the
house (n=148, 49.7%), eliminating standing water around the house (n=123, 41.3%) and covering water
containers in the home (n=120, 40.a3%). There was no correlation between dengue knowledge and
preventive practice score (p = 0.109). The study revealed that majority of the respondents had good
knowledge regarding dengue but the practices to prevent dengue are poor. Thus, health education program
focusing on dengue prevention practices should be done on the community members in the future.
Microplastics (MPs) are generated from plastic and have negative impact to our environment due to high level of fragmentation. They can be originated from various sources in different forms such as fragment, fiber, foam and so on. For detection of MPs, many techniques have been developed with different functions such as microscopic observation, density separation, Raman and FTIR analysis. Besides, due to ingestion of MPs by wide range of marine species, research on the effect of this pollution on biota as well as human is vital. Therefore, we comprehensively reviewed the occurrence and distribution of MPs pollution in both marine and freshwater environments, including rivers, lakes and wastewater treatment plants (WWTPs). For future studies, we propose the development of new techniques for sampling MPs in aquatic environments and biota and recommend more research regarding MPs release by WWTPs.
This study explored the influence of azo dye concentration, salinity (with and without aeration) and nitrate concentration on bioelectricity generation and treatment performance in the up-flow constructed wetland-microbial fuel cell (UFCW-MFC) system. The decolourisation efficiencies were up to 91% for 500 mg/L of Acid Red 18 (AR18). However, the power density declined with the increment in azo dye concentration. The results suggest that the combination of salinity and aeration at an optimum level improved the power performance. The highest power density achieved was 8.67 mW/m2. The increase of nitrate by 3-fold led to decrease in decolourisation and power density of the system. The findings revealed that the electron acceptors (AR18, nitrate and anode) competed at the anodic region for electrons and the electron transfer pathways would directly influence the treatment and power performance of UFCW-MFC. The planted UFCW-MFC significantly outweighed the plant-free control in power performance.
The data in this article contain supporting evidence for the research manuscript entitled "Bronchodilator effects of Lignosus rhinocerotis extract on rat isolated airways is linked to the blockage of calcium entry" by Lee et al. (2018) [1]. The data were obtained by calcium imaging technique with fluorescent calcium indicator dyes, Fura 2-AM, to visualize calcium ion movement in the rat dorsal ganglion (DRG) cells. The effects of L. rhinocerotis cold water extract (CWE1) on intracellular calcium levels in the DRG cells were presented.