The oil quality parameters of the seed oil of Baobab (Adansonia digitata) were evaluated using standard methods of analysis. The Iodine value, Peroxide value, Saponification value were 86 g/100g, 4.08 mEq/Kg, 188 mg/g, respectively, for seed oil. The oil content of the kernel was higher 23% compared to the hulls that contain 5.4% oil. The kernel oil contains substantial quantities of calcium, potassium, and magnesium, which were found to be 4116, 2339 and 1629 mg/Kg, respectively. The fatty acid profile showed that oleic and linoleic were the major unsaturated fatty acids, whereas palmitic was the major saturated acid. The oil also, showed considerable amount of total phenolic content (TPC) and worthy antioxidant activity. Baobab oil has great nutritional and industrial potentials. It is therefore recommended that more and advanced research should be undertaken for this abundant source of natural nutritious oil.
Various techniques are commonly used to produce nano-crystalline NiAl2O4 materials; however, their practical applications in the microwave region remain very limited. In this work, flexible substrates for metamaterials containing two different concentrations of NiAl2O4 (labelled Ni36 and Ni42) have been synthesised using a sol-gel method. The formation of spinel structures in the synthesised materials is confirmed, and their crystalline sizes are determined using scanning electron microscopy, X-ray diffraction, and energy dispersive X-ray techniques. The dielectric properties, conductivities, loss tangents, and other parameters of the NiAl2O4-based substrates are analysed to evaluate their applicability as dielectric materials for the microwave frequency range. The obtained results show that the fabricated Ni36 and Ni42 nickel aluminates possess dielectric constants of 4.94 and 4.97 and loss tangents of 0.01 and 0.007, respectively; in addition, they exhibit high flexibility and light weight, which make them suitable for applications as metamaterial substrates. The synthesised structures are also validated experimentally using a commercially available electromagnetic simulator; as a result, double negative behaviour of the flexible metamaterials has been observed. Furthermore, it is found that the prepared NiAl2O4 substrates can be used in the S-, C-, and X-bands of the microwave frequency region.
his paper presents the structure and static model of engine camshaft analysis. For the purposes of this analysis, the finite element method is used. Camshaft is one of the critical components for effective and precise work of internal combustion engines. This camshaft rotates at high speed causing pressure and vibration in the system. Camshafts are also subject to varying fatigue burden due to cam plunger contact. These precise values are required to be determined to prevent failure in the camshaft. The objective of the project is to model and to perform pressure analysis on the camshaft machine. In this project the standard engine cam shafts are modeled and analyzed using the CATIA V5R21 software respectively. This model is created by the basic requirements of the engine. It is done with an existing background, such as the power of acting on cam by means of a valve while running at maxi mum speed. Here the approach becomes fully CAE based. CAE - based approaches enrich Research and limit the time span. A study was conducted to predict the behavior of the different camshafts structure of the material using the finite three - dimensional pressure of the element. Four types of materials such as Steel, Titanium, Aluminum and Magnesium are taken into account. FEA Stress and maximum displacement decisions are calculated and compared to all of the above materials. The conclusion is to focus on the material suitable for the camshaft to reduce the maximum displacement and weight. Titanium materials become the best material for camshaft manufacturing based on analysis.
In this work, Sr0.3Ba0.4Pb0.3Fe12O19/(CuFe₂O₄)x (x = 2, 3, 4, and 5) as strongly exchange-coupled nanosized ferrites were fabricated using a one-pot sol⁻gel combustion method (citrate sol-gel method). The X-ray diffraction (XRD) powder patterns of the products confirmed the occurrence of pure, exchange-coupled ferrites. Frequency dependencies of the microwave characteristics (MW) were investigated using a co-axial method. The non-linear behavior of the MW with the composition transformation may be due to different degrees of Fe ion oxidation on the spinel/hexaferrite grain boundaries and strong exchange coupling during the hard and soft phases.
Nitridation behaviour of Al-Mg-Si alloys was studied as a function of temperature by means of thermogravimetry method. A reactive gas, N2-4%H2 at a rate of 10 ml/min was purged into the thermogravimetry analyser chamber. The Al alloys were heated from 25oC to 625oC at the heating rate of 15oC/min and then reduced to 3oC/min until it reached 1500oC. It was found that by varying the amount of Mg and Si in Al-Mg-Si alloys significantly influenced the growth of the composites. A differential thermogravimetric curve shows the Mg containing alloys experienced many steps of chemical reactions. This indicates that besides AlN presence as a major phase, other compounds also exist in the final product. The X-ray diffraction results confirmed the existence of oxide phases such as a-Al2O3, MgAl2O4 and MgO in addition to residual Si and Al metal. The presence of oxide compounds is believed to be due to the reaction between the alloying elements and residual oxygen gas left in the reaction atmosphere. It was also found that Si could play a role in promoting the weight gain of the composite produced. The heating rate has also a profound effect on the weight gain, whereby higher heating rate resulted in low yielded of AlN during the nitridation reaction of the Al-Mg-Si alloys.
The transition from monolayer to multilayer adsorption at the air-water interface in the presence of multivalent counterions has been demonstrated for a limited range of anionic surfactants which exhibit increased tolerance to precipitation in the presence of multivalent counterions. Understanding the role of molecular structure in determining the transition to surface ordering is an important aspect of the phenomenon. The focus of the paper is on the alkyl ester sulfonate, AES, surfactants; a promising group of anionic surfactants, with the potential for improved performance and biocompatibility. Neutron reflectivity measurements were made in aqueous solution and in the presence of NaCl, CaCl2, MgCl2 and AlCl3, for a range of alkyl ester sulfonate surfactants, in which the headgroup and alkyl chain geometries were manipulated. In the regions of monolayer adsorption changing the AES headgroup and alkyl chain geometries results in an increased saturation adsorption and in a more gradual decrease in the adsorption at low concentrations, consistent with a greater adsorption efficiency. Changing the AES headgroup and alkyl chain geometries also results in changes in the transition from monolayer adsorption to more ordered surface structures with the addition of AlCl3 and mixed multivalent electrolytes. A more limited surface layering is observed for the ethyl ester sulfonate, EES, with a C14 alkyl chain. Replacing the C14 alkyl chain with a C18 isostearic chain results in only monolayer adsorption. The results demonstrate the role and importance of the surfactant molecular structure in determining the nature of the surface adsorption in the presence of different electrolytes, and in the tendency to form extended surface multilayer structures.
This research was conducted to investigate the compaction performance and mechanical
strength of compacted urea fertilizer in unlubricated and lubricated die systems. The
ground urea 46% N fertilizer was compacted in a 13 mm flat-face cylindrical die set in
both unlubricated and lubricated die systems with vegetable fatty acids and magnesium
stearate as lubricants at various compaction stresses to produce urea fertilizer tablets. In
conclusion, a lubricated die system reduces the frictional effects during the production of
urea fertilizer tablets and also produces a mechanically stronger urea fertilizer tablet than
those produced in an unlubricated die system. In addition, the vegetable fatty acids and
magnesium stearate lubricants are found to improve the compaction performance of urea
fertilizer tablet as well as its mechanical strength.
Acid sulfate soils are generally not suitable for the crop production unless they are efficiently improved. A study was conducted to improve the productivity of acid sulfate soils for rice cultivation using ground magnesium limestone (GML), basalt and organic fertilizer. The study was conducted on rice in laboratory, glasshouse and field. The pH of acid sulfate soils was low and exchangeable Al was very high which affected rice growth. The application of GML and basalt increased soil pH and reduced Al toxicity. GML required to ameliorate the soils for rice cultivation was 4 t ha-1. Basalt in combination with organic fertilizer was a good soil amendment, but required to be applied a few months ahead of rice cultivation. Due to GML or basalt application, rice plants grew well even though water pH was below 5. The highest rice yield obtained was 4.0 t ha-1 season-1 for Sulfaquepts and it was 7.5 t ha-1 season-1 for Sulfosaprists. In general, the application of GML or basalt in combination with organic fertilizer improved the productivity of acid sulfate soils and consequently enhanced rice yield.
Structurally modified hydroxyl functionalized pyridinium ionic liquids (ILs), liquid at room temperature, were synthesized and characterized. Alkylated N-(2-hydroxyethyl)-pyridinium ILs were prepared from alkylpyridines via corresponding bromide salts by N-alkylation (65-93%) and final anion exchange (75-96%). Pyridinium-alkylation strongly influenced the IL physicochemical and electrochemical properties. Experimental values for the ILs physicochemical properties (density, viscosity, conductivity, and thermal decomposition temperature), were in good agreement with corresponding predicted values obtained by theoretical calculations. The pyridinium ILs have electrochemical window of 3.0-5.4 V and were thermally stable up to 405°C. The IL viscosity and density were measured over a wide temperature range (25-80°C). Pyridine alkyl-substitution strongly affected the partial positive charge on the nitrogen atom of the pyridinium cations, as shown by charge distribution calculations. On-going studies on Mg complexes of the new ILs demonstrate promising properties for high current density electrodeposition of magnesium.
We demonstrate the preparation of nanostructures cobalt oxide/reduced graphene oxide (Co3O4/rGO) nanocomposites by a simple one-step cost-effective hydrothermal technique for possible electrode materials in supercapacitor application. The X-ray diffraction patterns were employed to confirm the nanocomposite crystal system of Co3O4/rGO by demonstrating the existence of normal cubic spinel structure of Co3O4 in the matrix of Co3O4/rGO nanocomposite. FTIR and FT-Raman studies manifested the structural behaviour and quality of prepared Co3O4/rGO nanocomposite. The optical properties of the nanocomposite Co3O4/rGO have been investigated by UV absorption spectra. The SEM/TEM images showed that the Co3O4 nanoparticles in the Co3O4/rGO nanocomposites were covered over the surface of the rGO sheets. The electrical properties were analyzed in terms of real and imaginary permittivity, dielectric loss and AC conductivity. The electrocatalytic activities of synthesized Co3O4/rGO nanocomposites were determined by cyclic voltammetry and charge-discharge cycle to evaluate the supercapacitive performance. The specific capacitance of 754 Fg-1 was recorded for Co3O4/rGO nanocomposite based electrode in three electrode cell system. The electrode material exhibited an acceptable capability and excellent long-term cyclic stability by maintaining 96% after 1000 continuous cycles. These results showed that the prepared sample could be an ideal candidate for high-energy application as electrode materials. The synthesized Co3O4/rGO nanocomposite is a versatile material and can be used in various application such as fuel cells, electrochemical sensors, gas sensors, solar cells, and photocatalysis.
A geopolymer has been reckoned as a rising technology with huge potential for application across the globe. Dolomite refers to a material that can be used raw in producing geopolymers. Nevertheless, dolomite has slow strength development due to its low reactivity as a geopolymer. In this study, dolomite/fly ash (DFA) geopolymer composites were produced with dolomite, fly ash, sodium hydroxide, and liquid sodium silicate. A compression test was carried out on DFA geopolymers to determine the strength of the composite, while a synchrotron Micro-Xray Fluorescence (Micro-XRF) test was performed to assess the elemental distribution in the geopolymer composite. The temperature applied in this study generated promising properties of DFA geopolymers, especially in strength, which displayed increments up to 74.48 MPa as the optimum value. Heat seemed to enhance the strength development of DFA geopolymer composites. The elemental distribution analysis revealed exceptional outcomes for the composites, particularly exposure up to 400 °C, which signified the homogeneity of the DFA composites. Temperatures exceeding 400 °C accelerated the strength development, thus increasing the strength of the DFA composites. This appears to be unique because the strength of ordinary Portland Cement (OPC) and other geopolymers composed of other raw materials is typically either maintained or decreases due to increased heat.
In recent years considerable attention has been attracted to magnesium because of its light weight, high specific strength, and ease of recycling. Because of the growing demand for lightweight materials in aerospace, medical and automotive industries, magnesium-based metal matrix nanocomposites (MMNCs) reinforced with ceramic nanometer-sized particles, graphene nanoplatelets (GNPs) or carbon nanotubes (CNTs) were developed. CNTs have excellent material characteristics like low density, high tensile strength, high ratio of surface-to-volume, and high thermal conductivity that makes them attractive to use as reinforcements to fabricate high-performance, and high-strength metal-matrix composites (MMCs). Reinforcing magnesium (Mg) using small amounts of CNTs can improve the mechanical and physical properties in the fabricated lightweight and high-performance nanocomposite. Nevertheless, the incorporation of CNTs into a Mg-based matrix faces some challenges, and a uniform distribution is dependent on the parameters of the fabricating process. The characteristics of a CNTs reinforced composite are related to the uniform distribution, weight percent, and length of the CNTs, as well as the interfacial bonding and alignment between CNTs reinforcement and the Mg-based matrix. In this review article, the recent findings in the fabricating methods, characterization of the composite's properties, and application of Mg-based composites reinforced with CNTs are studied. These include the strategies of fabricating CNT-reinforced Mg-based composites, mechanical responses, and corrosion behaviors. The present review aims to investigate and conclude the most relevant studies conducted in the field of Mg/CNTs composites. Strategies to conquer complicated challenges are suggested and potential fields of Mg/CNTs composites as upcoming structural material regarding functional requirements in aerospace, medical and automotive industries are particularly presented.
The purposes of this research were to study the characteristics chemistry of pH, anions and cations in rainwater, and to identify the possible sources that contributing to the acid precipitation during southwest monsoon season with occurrence of extreme drought event. During the southwest monsoon season, it normally occurs along with haze phenomenon that every year will hit Southeast Asia. This condition will aggravate with high acidic particles in the atmosphere due to the prolonged drought. The analysed parameters which involved pH, anions (NO3-, SO42- and Cl-) and cations (Ca2+, Mg2+, Na+ and K+) were analysed using pH meter, Hach DR 2800, argentometric method and ICP-OES. From the findings, it showed that acid rain occurred during the southwest monsoon season with the range of pH values from 4.95 ± 0.13 to 6.40 ± 0.03 and the total average of pH 5.71 ± 0.32. Anions NO3-, SO42- and Cl- were found to be the dominant compositions of the acid rain occurrences with higher concentrations detected. In overall, rural area recorded with higher acidity of precipitation at total average of pH 5.54 ± 0.39 compared to urban area at pH 5.77 ± 0.26. Rural area surprisingly recorded higher frequency occurrences of acid rain with pH lesser than 5.6 and below compared to urban area. As for public health and safety, all rainwater samples during the acid rain event were found exceeded the allowable limits of NWQS and WHO standards, that shown not suitable for skin contact, recreational purposes even for drinking purposes.
In recent times, magnesium oxide (MgO) nanoparticles are proven to be an excellent antibacterial agent which inhibits the growth of bacteria by generating reactive oxygen species (ROS). Release of ROS by nanoparticles will damage the cell membrane of bacteria and leads to the leakage of bacterial internal components and cell death. However, chemically synthesized MgO nanoparticles may possess toxic functional groups which may inhibit healthy human cells along with bacterial cells. Thus, the aim of the present study is to synthesize MgO nanoparticles using leaf extracts of Amaranthus tricolor and photo-irradiation of visible light as a catalyst, without addition of any chemicals. Optimization was performed using Box-Behnken design (BBD) to obtain the optimum condition required to synthesize smallest nanoparticles. The parameters such as time of reaction, the concentration of precursor, and light intensity have been identified to affect the size of biosynthesized nanoparticles and was optimized. The experiment performed with optimized conditions such as 0.001 M concentration of magnesium acetate as precursor, 5 cm distance of light (intensity), and 15 min of reaction time (light exposure) has led to the formation of 74.6 nm sized MgO nanoparticles. The antibacterial activities of MgO nanoparticles formed via photo-irradiation and conventional biosynthesis approach were investigated and compared. The lethal dosage of E. coli for photo-irradiated and conventional biosynthesis MgO nanoparticles was 0.6 ml and 0.4 ml, respectively. Likewise, the lethal dosage of S. aureus for both biosynthesis approaches was found to be 0.4 ml. The results revealed that the antibacterial activity of MgO nanoparticles from both biosynthesis approaches was similar. Thus, photo-irradiated MgO nanoparticles were beneficial over heat-mediated conventional method due to the reduced synthesis duration.
Pencirian enzim ekstraselular protease daripada bakteria Alkalophilic Bacillus lehensis G1 dari Malaysia telah dikaji. Enzim protease yang dirembeskan diuji pada agar susu skim 2%. Keputusan menunjukkan protease ekstraselular mampu mengekalkan aktiviti sehingga suhu 60°C di dalam julat pH yang luas iaitu 3 hingga 11 dengan suhu optimum pada 40°C dan pH optimum pada 7.0. Aktiviti enzim juga diperhatikan akan meningkat dengan penambahan beberapa ion iaitu Mn2+, Fe2+, Cu2+, Mg2+ dan Co2+. Manakala aktiviti protease didapati sedikit direncat dengan kehadiran ion Ca2+, K+ dan Ni2+ dengan baki aktiviti sebanyak 85%, 81% dan 75%. Protease ekstraselular juga didapati serasi dengan beberapa cecair detergen komersial dari Malaysia, yang menunjukkan protease ini boleh dimanfaatkan sebagai pembersih kotoran pada pakaian. Selain itu, potensi kegunaan protease yang dihasilkan oleh B. lehensis G1 ke atas penguraian gelatin dari filem X-ray yang telah digunakan juga telah dilakukan di dalam kajian ini.
Oil palm is widely grown in Malaysia. There has been interest in the utilization of oil palm biomass for production of environmental friendly biofuels. The gasification of empty fruit bunches (EFB), a waste of the palm oil industry, was investigated in this study to effectively and economically convert low value and highly distribution solid biomass to a uniform gaseous mixture mainly hydrogen (H2). The effects of temperature, equivalence ratio (ER) and catalyst adding on the yields and distribution of hydrogen rich gas products were also investigated. The main gas species generated, as identified by GC, were H2, CO, CO2, CH4 and trace amounts of C2H4 and C2H6. With temperature increasing from 700 to 1000 °C, the total gas yield was enhanced greatly and reached the maximum value (~ 90 wt. % ) at 1000°C with a big portion of H2 (38.02 vol. %) and CO (36.36 vol. %). Equivalence ratio (ER) showed a significant influence on the upgrading of hydrogen production and product distribution. The optimum ER (0.25) was found to attain a higher H2 yield (27.42 vol. %) at 850°C. The effect of adding catalysts (Malaysian dolomite1, P1), Malaysian dolomite2 (GML), NaOH, NaCl, CaO, ZnO, NiO) as a primary catalyst on gas product yield was investigated, and it was found that adding dolomite showed the greatest effect with the maximum H2 yield achieved (28.18 vol.%) at 850°C.
Magnesium-based polymer gel electrolytes consist of magnesium triflate (MgTf) salt, a mixture of ethylene carbonate (EC) and diethyl carbonate (DEC) solvents as well as cellulose acetate as a polymeric agent were prepared via direct dissolution method. The highest ionic conductivity obtained for MgTf-EC:DEC(1:1) liquid electrolytes was 2.66 x 10-3 S cm-1 and enhanced to 2.73 x 10-3 S cm-1 with the addition of cellulose acetate. These results were in agreement with the activation energy obtained with the lowest value of 0.11. The best explanation on the enhancement in ionic conductivity of PGE is due to the “breathing polymeric chain model”. The plots of conductivity-temperature shown to obey an Arrhenius rule. The electrical properties of the sample with the highest conductivity were analyzed using electrical permittivity-based frequency and temperature dependence in the range of 100 Hz - 1 MHz and 303-373K, respectively. The variation in dielectric permittivity (εr and εi) as a function of frequency at different temperatures exhibited decays at higher frequencies and a dispersive behavior at low frequencies. Based on the observed electrical properties, it can be inferred that this polymer gel electrolyte could be a promising candidate as an electrolyte in electrochemical devices.
The study was conducted to determine the mineral contents of 20 species of marine fish and 4 species of shellfish from the west coast of Peninsular Malaysia.Overall, the contents of micro minerals in all samples were below the permissible limits; except for oyster; with copper slightly higher than the limit set by FAO/WHO (1984), but below the limit set by Malaysian Food Regulations (1985); and zinc content higher than the limit set by Malaysian Food Regulations (1985), but below the limit set by FAO/WHO (1984). Meanwhile for macro minerals, most samples contained comparable sodium contents, significantly lower of potassium contents, higher calcium contents, and extremely higher of magnesium contents compared to the common ranges reported in the literatures. All samples were good sources of micro and macro minerals and could provide multi-health benefits if consumed in recommended amounts.
Anion clay hydrotalcite MgA1C0 3 with a Mg/A1 molar ratio of 3:1 was synthesized by co-precipitation at room temperature and pressure. The physicochemical properties were evaluated using Powder X-Ray Diffraction (PXRD), Fourier Transform Infrared (FTIR) spectroscopy and Thermogravimetric Analysis (TGA). The efficacy of anion clay hydrotalcite in the removal ofCcf- from aqueous solutions was investigated with respect to contact time, initial concentration, pH, adsorbent dosage and temperature. The Cd2- removal increased with the increased in contact time, adsorbent dosage, pH and initial concentration. Adsorption decreases with increasing initial concentration and temperature, for which the latter is indicative of an exothermic process. The equilibrium adsorption capacity of MgA1C0 3 was evaluated using linear Langmuir and Freundlich isotherms with respect to the separation factor, RL.
The aims of this study were to examine the effect of salts (CaCl2, CaSO4 and MgSO4) on the rheological and thermal properties of gelatin extracted from the skins of tropical fishes, sin croaker (Johnius dussumeiri) and shortfin scad (Decapterus macrosoma). It was found that the melting temperatures of fish skin gelatins were increased by 1.5 times as compared to bovine gelatin which was only increased by 0.5 times after holding for 2 h at 5°C. The storage (G’) and loss (G”) modulus of fish skin gelatins were improved with the addition of calcium sulphate (CaSO4) and magnesium sulphate (MgSO4), respectively. However, the storage (G’) and loss (G”) modulus of gelatin solutions were decreased with the addition of calcium chloride (CaCl2). Magnesium sulphate (MgSO4) was found to be an effective salt to improve the bloom value, elastic and viscous moduli of the fish skin gelatin. This study showed that shortfin scad skin gelatin with salt addition possessed better thermal and rheological properties than sin croaker gelatin.