Displaying publications 81 - 100 of 843 in total

Abstract:
Sort:
  1. Ayanda AF, Jusop S, Ishak CF, Othman R
    PLoS One, 2020;15(6):e0234045.
    PMID: 32544208 DOI: 10.1371/journal.pone.0234045
    A study was conducted to determine the impact of applying different sources of Mg, namely kieserite, ground magnesium limestone (GML) and Mg-rich synthetic gypsum (MRSG) on an acid tropical soil, oil palm growth and production. Besides high amount of Mg and Ca, MRSG contains S. Exchangeable Ca in the untreated soil of the plantation was 0.64 cmolc kg-1, but its critical level to sustain oil palm growth was 0.9 cmolc kg-1. MRSG was applied in the plantation as Mg-fertilizer; however, since Ca is also a limiting nutrient, oil palm growth was correlated (r = 0.69) with Ca supplied by the MRSG. Mg needed to sustain oil palm production is normally supplied by kieserite. Its requirement can be met at a lower cost compared to that of the kieserite by using MRSG. Due to MRSG treatment, exchangeable Ca in the soil increased steadily to satisfy the requirement of oil palm for fruit bunches production. From the glasshouse and field study, it was observed that MRSG applied at 1.5 times the recommended rate gave results comparable to that of the kieserite. MRSG treatment resulted in the increase of soil pH to >5 that precipitated Al3+ as inert Al-hydroxides, which eventually enhanced oil palm seedlings growth. Thus, MRSG can also replace GML to increase soil pH and satisfy the Ca and Mg requirement of oil palm. It can be concluded that MRSG has the potential to be used as a source of Mg as well as Ca for oil palm grown on acidic soil.
    Matched MeSH terms: Calcium Sulfate/pharmacology*; Calcium Sulfate/chemistry*
  2. Ayensu J, Annan R, Lutterodt H, Edusei A, Peng LS
    PLoS One, 2020;15(1):e0226026.
    PMID: 31978048 DOI: 10.1371/journal.pone.0226026
    BACKGROUND: Anaemia remains a major cause of morbidity and mortality among women and children worldwide. Because deficiencies in essential micronutrients such as iron, folate and vitamin B12 prior to and during gestation increase a woman's risk of being anaemic, adequate dietary intake of such nutrients is vital during this important phase in life. However, information on the dietary micronutrient intakes of pregnant women in Ghana, particularly of those resident in rural areas is scanty. Thus, this study aimed to assess anaemia prevalence and dietary micronutrient intakes in pregnant women in urban and rural areas in Ghana.

    METHODS: A comparative cross sectional study design involving 379 pregnant women was used to assess the prevalence of anaemia and low intake of dietary nutrients in pregnant women living in rural and urban areas in the Ashanti region of Ghana. Anaemia status and mid upper arm circumference (MUAC) were used as proxy for maternal nutritional status. Haemoglobin measurements were used to determine anaemia prevalence and the dietary diversity of the women were determined with a 24-hour dietary recall and a food frequency questionnaire.

    RESULTS: Overall, anaemia was present in 56.5% of the study population. Anaemia prevalence was higher among rural residents than urban dwellers. Majority of the respondents had inadequate intakes of iron, zinc, folate, calcium and vitamin A. The mean dietary diversity score (DDS) of the study population from the first 24-hour recall was 3.81 ± 0.7. Of the 379 women, 28.8% met the minimum dietary diversity for women (MDD-W). The independent predictors of haemoglobin concentration were, gestational age, maternal age and dietary diversity score. Such that respondents with low DDS were more likely to be anaemic than those with high DDS (OR = 1.795, p = 0.022, 95% CI: 1.086 to 2.967).

    CONCLUSIONS: A large percentage of pregnant women still have insufficient dietary intakes of essential nutrients required to support the nutritional demands during pregnancy. Particularly, pregnant women resident in rural areas require interventions such as nutrition education on the selection and preparation of diversified meals to mitigate the effects of undernutrition.

    Matched MeSH terms: Calcium, Dietary
  3. Azarisman S.M.S., Aszrin A., Sahimi M.S., Ngow, Harris, Marzuki A.O., Jamalludin A.R., et al.
    MyJurnal
    Introduction: Hypertension is one of the most important risk factors for cardiovascular disease in Malaysia. The prevalence of hypertension nearly doubled over a ten-year period (1986 – 1996). This has resulted in a significant rise in its attendant cost. We aim to review the institutional anti-hypertensive use, the cost incurred and the implications on management in our local setting. Materials and Methods: A retrospective review of the annual cost (2006) of anti-hypertensive medications was undertaken at the Department of Pharmacy, Hospital Tengku Ampuan Afzan, a 600-bed major regional hospital on the east-coast of Malaysia. The total number of prescriptions given out and the total cost per drug is then factored to give the annual cost per drug per person in a percentage of the total annual expenditure.Results: The majority of patients were on either 2 (46.5%) or 3 (25.9%) anti-hypertensives. The most frequently prescribed medications were ACE Inhibitors (33.45%), Calcium channel blockers (29.63%), diuretics (16.67%) and β-blockers (13.64%). In terms of cost however, the Calcium channel blockers constituted the greatest percentage of the annual anti-hypertensive budget (63.67%) compared to ACE Inhibitors at just 20.04% of the annual expenditure. The least costly group of drugs is the diuretic making up 16.67% of the total annual prescriptions but only constituting 1.23% of the annual cost. Conclusion: The majority of patients were on ACE Inhibitors and/or Calcium channel blockers. This has huge monetary implications as they represent a large proportion of the annual antihypertensive allocation. There may be a need to reverse the trend in the developing world due to cost restrictions.
    Matched MeSH terms: Calcium Channel Blockers
  4. Azimah Hussain, Poole C
    To evaluate the correlation of the intragranular textures on the physical properties of coarse aggregates, four aggregates samples consisting of three granitoid sources and one limestone have been studied. The role played by intragranular textures (mineral assembladge, grain size and grain boundaries) in influencing the physical properties are potentially significant to the fact that such textural variation may complicate the aggregate strength. This study indicates that the aggregates exhibited variation in textural habits. The granitoid aggregates, which is rich with silicate composition has typical heterogranular textures of porphyritic and equigranular grain structures. Whereas the limestone aggregate comprises of bioclast and peloid allochems cemented by micrite and spar. The granitoid aggregates showed better dispersed characters and had extremely interlocking crystal boundaries which have more physical strength compared to a carbonate aggregate.
    Matched MeSH terms: Calcium Carbonate
  5. Azimi EA, Abdullah MMAB, Vizureanu P, Salleh MAAM, Sandu AV, Chaiprapa J, et al.
    Materials (Basel), 2020 Feb 24;13(4).
    PMID: 32102345 DOI: 10.3390/ma13041015
    A geopolymer has been reckoned as a rising technology with huge potential for application across the globe. Dolomite refers to a material that can be used raw in producing geopolymers. Nevertheless, dolomite has slow strength development due to its low reactivity as a geopolymer. In this study, dolomite/fly ash (DFA) geopolymer composites were produced with dolomite, fly ash, sodium hydroxide, and liquid sodium silicate. A compression test was carried out on DFA geopolymers to determine the strength of the composite, while a synchrotron Micro-Xray Fluorescence (Micro-XRF) test was performed to assess the elemental distribution in the geopolymer composite. The temperature applied in this study generated promising properties of DFA geopolymers, especially in strength, which displayed increments up to 74.48 MPa as the optimum value. Heat seemed to enhance the strength development of DFA geopolymer composites. The elemental distribution analysis revealed exceptional outcomes for the composites, particularly exposure up to 400 °C, which signified the homogeneity of the DFA composites. Temperatures exceeding 400 °C accelerated the strength development, thus increasing the strength of the DFA composites. This appears to be unique because the strength of ordinary Portland Cement (OPC) and other geopolymers composed of other raw materials is typically either maintained or decreases due to increased heat.
    Matched MeSH terms: Calcium Carbonate
  6. Aziz HA, Adlan MN, Zahari MS, Alias S
    Waste Manag Res, 2004 Oct;22(5):371-5.
    PMID: 15560441
    The presence of ammoniacal nitrogen (N-NH3) in leachate is one of the problems normally faced by landfill operators. Slow leaching of wastes producing nitrogen and no significant mechanism for transformation of N-NH3 in the landfills causes a high concentration of ammoniacal nitrogen in leachate over a long period of time. A literature review showed that the removal of ammoniacal nitrogen from leachate was not well documented and to date, there were limited studies in Malaysia on this aspect, especially in adsorption treatment. The main objective of the present study was to investigate the suitability of activated carbon, limestone and a mixture of both materials as a filtering medium, in combination with other treatments capable of attenuating ammoniacal nitrogen which is present in significant quantity (between 429 and 1909 mg L(-1)) in one of the landfill sites in Malaysia. The results of the study show that about 40% of ammoniacal nitrogen with concentration of more than 1000 mg L(-1) could be removed either by activated carbon or a mixture of carbon with limestone at mixture ratio of 5:35. This result shows that limestone is potentially useful as a cost-effective medium to replace activated carbon for ammoniacal nitrogen removal at a considerably lower cost.
    Matched MeSH terms: Calcium Carbonate/chemistry
  7. Aziz HA, Yusoff MS, Adlan MN, Adnan NH, Alias S
    Waste Manag, 2004;24(4):353-8.
    PMID: 15081062
    Limestone has been proven effective in removing metals from water and wastewater. A literature review indicated that limestone is capable of removing heavy metals such as Cu, Zn, Cd, Pb, Ni, Cr, Fe and Mn are through a batch process or by filtration technique. The removal capability is reported at up to 90%. However, to date most of the studies have been focused on synthetic wastewater. The present study attempts to investigate the suitability of limestone to attenuate total iron (Fe) from semi aerobic leachate at Pulau Burung Landfill Site in Penang, Malaysia. Iron was found in significant quantities at the landfill site. The study also aims to establish the Fe isotherm and breakthrough time of the proposed limestone filter for post-treatment to the migrating landfill leachate before its release to the environment. The Fe isotherms were established using a batch equilibrium test, while the breakthrough characteristics were determined using continuous flow permeating through a limestone column. The latter was used in order to simulate the continuous flow of leachate that would occur in the proposed limestone filter. The limestone media used in the experiment contain more than 90% CaCO3 with particle sizes ranging from 2 to 4 mm. Four filter columns (each 150 mm in diameter and 1000 mm depth) were installed at the landfill site. Metal loadings were kept below 0.5 kg /m3 day and the experiment was run continuously for 30 days. Initial results indicated that 90% of Fe can be removed from the leachate based on retention time of 57.8 min and surface loading of 12.2 m3/m2 day. For the batch study on the Fe isotherm, the results indicated that limestone is potentially useful as an alternative leachate treatment system at a relatively low cost.
    Matched MeSH terms: Calcium Carbonate/chemistry*
  8. Aziz HA, Othman N, Yusuff MS, Basri DR, Ashaari FA, Adlan MN, et al.
    Environ Int, 2001 May;26(5-6):395-9.
    PMID: 11392757
    This paper discusses heavy metal removal from wastewater by batch study and filtration technique through low-cost coarse media. Batch study has indicated that more than 90% copper (Cu) with concentration up to 50 mg/l could be removed from the solution with limestone quantity above 20 ml (equivalent to 56 g), which indicates the importance of limestone media in the removal process. This indicates that the removal of Cu is influenced by the media and not solely by the pH. Batch experiments using limestone and activated carbon indicate that both limestone and activated carbon had similar metal-removal efficiency (about 95%). Results of the laboratory-scale filtration technique using limestone particles indicated that above 90% removal of Cu was achieved at retention time of 2.31 h, surface-loading rate of 4.07 m3/m2 per day and Cu loading of 0.02 kg/m3 per day. Analyses of the limestone media after filtration indicated that adsorption and absorption processes were among the mechanisms involved in the removal processes. This study indicated that limestone can be used as an alternative to replace activated carbon.
    Matched MeSH terms: Calcium Carbonate/chemistry*
  9. Azizan E, Sukor N, Kamaruddin NA, Jamal AR, Ceral J, Solar M, et al.
    J Hypertens, 2016 Sep;34 Suppl 1 - ISH 2016 Abstract Book:e550.
    PMID: 27754305
    Aldosterone-producing adenoma (APA) is a common curable cause of hypertension. Somatic mutations in five genes (KCNJ5, ATP1A1, ATP2B3, CACNA1D, and CTNNB1) have been found to cause the excess aldosterone production of two thirds of APAs [1-4]. KCNJ5 mutant APAs, the most common and largest, had explicit genotype-phenotype relationship - a low protein expression of KCNJ5 relative to their peritumoural zona glomerulosa (ZG) and a zona fasciculata-like composition [5-6]. Conversely for the other genes, controversy arises on whether they have the opposite cell phenotype [4,7-8]. This prospective study aim to to characterize the histopathological-specific mutation spectrum of APAs.
    Matched MeSH terms: Plasma Membrane Calcium-Transporting ATPases
  10. Azman EA, Ismail R, Ninomiya S, Jusop S, Tongkaemkaew U
    PLoS One, 2023;18(9):e0290703.
    PMID: 37713375 DOI: 10.1371/journal.pone.0290703
    Acid sulfate soil characterized by pyrite (FeS2) which produces high acidity (soil pH < 3.5) and release high amount of Al3+ and Fe2+. Application of 4 t ha-1 Ground Magnesium Limestone (GML), is a common rate used for acid sulfate soil by the rice farmers in Malaysia. Therefore, this study was conducted to evaluate the integral effect of ground magnesium limestone (GML) and calcium silicate and to determine the optimal combination on acid sulfate soils in Malaysia. The acid sulfate soils were incubated under the submerged condition for 120 days with GML (0, 2, 4, 6 t ha-1) in combination with calcium silicate (0, 1, 2, 3 t ha-1) arranged in a Completely Randomized Design (CRD). The soil was sampled after 30, 60, 90 and 120 days of incubation and analyzed for soil pH, exchangeable Al, Ca, Mg, K and available Si. A total of 2 out of 16 combinations met the desired soil requirement for rice cultivation. The desired chemical soil characteristics for rice cultivation are soil pH > 4, exchangeable Al < 2 cmolc Kg-1, exchangeable Ca > 2 cmolc kg-1, exchangeable Mg > 1 cmolc kg-1 and Si content > 43 mg kg-1. The combinations are i) 2 t ha-1 calcium silicate + 2 t ha-1 GML, and ii) 3 t ha-1 calcium silicate + 2 t ha-1 GML, respectively. These combination rates met the desired requirement of soil chemical characteristics for rice cultivation. Soil acidity was reduced by a gradual release of Ca2+ and SiO32- from calcium silicate continuously filling the exchange sites and reducing the potential of extra (free) H+ availability in the soil system. Combination of calcium silicate and GML, shows the ameliorative effect with; i) release of Ca, ii) binding of Al3+ making it inert Al-hydroxides and, iii) bind H+ to produce water molecules.
    Matched MeSH terms: Calcium Carbonate*
  11. Azrin NAM, Ali MSM, Rahman RNZRA, Oslan SN, Noor NDM
    Biotechnol Appl Biochem, 2022 Dec;69(6):2599-2616.
    PMID: 35019178 DOI: 10.1002/bab.2309
    Due to its thermostability and high pH compatibility, subtilisin is most known for its role as an additive for detergents in which it is categorized as a serine protease according to MEROPS database. Subtilisin is typically isolated from various bacterial species of the Bacillus genus such as Bacillus subtilis, B. amyloliquefaciens, B. licheniformis, and various other organisms. It is composed of 268-275 amino acid residues and is initially secreted in the precursor form, preprosubtilisin, which is composed of 29-residues signal peptide, 77-residues propeptide, and 275-residues active subtilisin. Subtilisin is known for the presence of high and low affinity calcium binding sites in its structure. Native subtilisin has general properties of thermostability, tolerance to neutral to high pH, broad specificity, and calcium-dependent stability, which contribute to the versatility of subtilisin applicability. Through protein engineering and immobilization technologies, many variants of subtilisin have been generated, which increase the applicability of subtilisin in various industries including detergent, food processing and packaging, synthesis of inhibitory peptides, therapeutic, and waste management applications.
    Matched MeSH terms: Calcium
  12. Babiker, S., Mirghani, M.E.S., Saleh Matar, M., Kabbashi, N.A., Alam, Md. Z., Marikkar, J.M.N.
    MyJurnal
    The oil quality parameters of the seed oil of Baobab (Adansonia digitata) were evaluated using standard methods of analysis. The Iodine value, Peroxide value, Saponification value were 86 g/100g, 4.08 mEq/Kg, 188 mg/g, respectively, for seed oil. The oil content of the kernel was higher 23% compared to the hulls that contain 5.4% oil. The kernel oil contains substantial quantities of calcium, potassium, and magnesium, which were found to be 4116, 2339 and 1629 mg/Kg, respectively. The fatty acid profile showed that oleic and linoleic were the major unsaturated fatty acids, whereas palmitic was the major saturated acid. The oil also, showed considerable amount of total phenolic content (TPC) and worthy antioxidant activity. Baobab oil has great nutritional and industrial potentials. It is therefore recommended that more and advanced research should be undertaken for this abundant source of natural nutritious oil.
    Matched MeSH terms: Calcium, Dietary
  13. Baig AM, Khan NA, Katyara P, Lalani S, Baig R, Nadeem M, et al.
    Chem Biol Drug Des, 2021 01;97(1):18-27.
    PMID: 32602961 DOI: 10.1111/cbdd.13755
    Acanthamoeba spp. cause a corneal infection, Acanthamoeba keratitis (AK), and a cerebral infection, granulomatous amoebic encephalitis (GAE). Though aggressive chemotherapy has been able to kill the active trophozoite form of Acanthamoeba, the encysted form of this parasite has remained problematic to resist physiological concentrations of drugs. The emergence of encysted amoeba into active trophozoite form poses a challenge to eradicate this parasite. Acanthamoeba trophozoites have active metabolic machinery that furnishes energy in the form of ATPs by subjecting carbohydrates and lipids to undergo pathways including glycolysis and beta-oxidation of free fatty acids, respectively. However, very little is known about the metabolic preferences and dependencies of an encysted trophozoite on minerals or potential nutrients that it consumes to live in an encysted state. Here, we investigate the metabolic and nutrient preferences of the encysted trophozoite of Acanthamoeba castellanii and the possibility to target them by drugs that act on calcium ion dependencies of the encysted amoeba. The experimental assays, immunostaining coupled with bioinformatics tools show that the encysted Acanthamoeba uses diverse nutrient pathways to obtain energy in the quiescent encysted state. These findings highlight potential pathways that can be targeted in eradicating amoebae cysts successfully.
    Matched MeSH terms: Calcium/metabolism; Calcium Signaling/drug effects
  14. Bakhsh A, Mustapha NM, Mohamed S
    Nutrition, 2013 Apr;29(4):667-72.
    PMID: 23290096 DOI: 10.1016/j.nut.2012.09.005
    Postmenopausal estrogen deficiency often causes bone density loss and osteoporosis. This study evaluated the effects of an oral administration of oil palm leaf extract (OPL) on bone calcium content and structure, bone density, ash weights, and serum total alkaline phosphatase (T-ALP) of estrogen-deficient ovariectomized (OVX) rats.
    Matched MeSH terms: Calcium/analysis; Calcium/metabolism
  15. Balakrishnan K, Olutoye MA, Hameed BH
    Bioresour Technol, 2013 Jan;128:788-91.
    PMID: 23186664 DOI: 10.1016/j.biortech.2012.10.023
    The current research investigates synthesis of methyl esters by transesterification of waste cooking oil in a heterogeneous system, using barium meliorated construction site waste marble as solid base catalyst. The pretreated catalyst was calcined at 830 °C for 4h prior to its activity test to obtained solid oxide characterized by scanning electron microscopy/energy dispersive spectroscopy, BET surface area and pore size measurement. It was found that the as prepared catalyst has large pores which contributed to its high activity in transesterification reaction. The methyl ester yield of 88% was obtained when the methanol/oil molar ratio was 9:1, reaction temperature at 65 °C, reaction time 3h and catalyst/oil mass ratio of 3.0 wt.%. The catalyst can be reused over three cycles, offer low operating conditions, reduce energy consumption and waste generation in the production of biodiesel.
    Matched MeSH terms: Calcium Carbonate
  16. Bang LT, Ramesh S, Purbolaksono J, Long BD, Chandran H, Ramesh S, et al.
    Biomed Mater, 2015 Aug;10(4):045011.
    PMID: 26225725 DOI: 10.1088/1748-6041/10/4/045011
    Interconnected porous tricalcium phosphate ceramics are considered to be potential bone substitutes. However, insufficient mechanical properties when using tricalcium phosphate powders remain a challenge. To mitigate these issues, we have developed a new approach to produce an interconnected alpha-tricalcium phosphate (α-TCP) scaffold and to perform surface modification on the scaffold with a composite layer, which consists of hybrid carbonate apatite / poly-epsilon-caprolactone (CO3Ap/PCL) with enhanced mechanical properties and biological performance. Different CO3Ap combinations were tested to evaluate the optimal mechanical strength and in vitro cell response of the scaffold. The α-TCP scaffold coated with CO3Ap/PCL maintained a fully interconnected structure with a porosity of 80% to 86% and achieved an improved compressive strength mimicking that of cancellous bone. The addition of CO3Ap coupled with the fully interconnected microstructure of the α-TCP scaffolds coated with CO3Ap/PCL increased cell attachment, accelerated proliferation and resulted in greater alkaline phosphatase (ALP) activity. Hence, our bone substitute exhibited promising potential for applications in cancellous bone-type replacement.
    Matched MeSH terms: Calcium Phosphates/chemistry*
  17. Bannister ML, Alvarez-Laviada A, Thomas NL, Mason SA, Coleman S, du Plessis CL, et al.
    Br J Pharmacol, 2016 08;173(15):2446-59.
    PMID: 27237957 DOI: 10.1111/bph.13521
    BACKGROUND AND PURPOSE: Flecainide is a use-dependent blocker of cardiac Na(+) channels. Mechanistic analysis of this block showed that the cationic form of flecainide enters the cytosolic vestibule of the open Na(+) channel. Flecainide is also effective in the treatment of catecholaminergic polymorphic ventricular tachycardia but, in this condition, its mechanism of action is contentious. We investigated how flecainide derivatives influence Ca(2) (+) -release from the sarcoplasmic reticulum through the ryanodine receptor channel (RyR2) and whether this correlates with their effectiveness as blockers of Na(+) and/or RyR2 channels.

    EXPERIMENTAL APPROACH: We compared the ability of fully charged (QX-FL) and neutral (NU-FL) derivatives of flecainide to block individual recombinant human RyR2 channels incorporated into planar phospholipid bilayers, and their effects on the properties of Ca(2) (+) sparks in intact adult rat cardiac myocytes.

    KEY RESULTS: Both QX-FL and NU-FL were partial blockers of the non-physiological cytosolic to luminal flux of cations through RyR2 channels but were significantly less effective than flecainide. None of the compounds influenced the physiologically relevant luminal to cytosol cation flux through RyR2 channels. Intracellular flecainide or QX-FL, but not NU-FL, reduced Ca(2) (+) spark frequency.

    CONCLUSIONS AND IMPLICATIONS: Given its inability to block physiologically relevant cation flux through RyR2 channels, and its lack of efficacy in blocking the cytosolic-to-luminal current, the effect of QX-FL on Ca(2) (+) sparks is likely, by analogy with flecainide, to result from Na(+) channel block. Our data reveal important differences in the interaction of flecainide with sites in the cytosolic vestibules of Na(+) and RyR2 channels.

    Matched MeSH terms: Calcium/metabolism*; Ryanodine Receptor Calcium Release Channel/metabolism*
  18. Baradaran H, Ng CR, Gupta A, Noor NM, Al-Dasuqi KW, Mtui EE, et al.
    Int Angiol, 2017 Oct;36(5):445-461.
    PMID: 28541017 DOI: 10.23736/S0392-9590.17.03811-1
    BACKGROUND: The extent of calcium volume in the carotid arteries of contrast-based computer tomography (CT) is a valuable indicator of stroke risk. This study presents an automated, simple and fast calcium volume computation system. Since the high contrast agent can sometimes obscure the presence of calcium in the CT slices, it is therefore necessary to identify these slices before the corrected volume can be estimated.

    METHODS: The system typically consists of segmenting the calcium region from the CT scan into slices based on Hounsfield Unit-based threshold, and subsequently computing the summation of the calcium areas in each slice. However, when the carotid volume has intermittently higher concentration of contrast agent, a dependable approach is adapted to correct the calcium region using the neighboring slices, thereby estimating the correct volume. Furthermore, mitigation is provided following the regulatory constraints by changing the system to semi-automated criteria as a fall back solution. We evaluate the automated and semi-automated techniques using completely manual calcium volumes computed based on the manual tracings by the neuroradiologist.

    RESULTS: A total of 64 patients with calcified plaque in the internal carotid artery were analyzed. Using the above algorithm, our automated and semi-automated system yields correlation coefficients (CC) of 0.89 and 0.96 against first manual readings and 0.90 and 0.96 against second manual readings, respectively. Using the t-test, there was no significant difference between the automated and semi-automated methods against manual. The intra-observer reliability was excellent with CC 0.98.

    CONCLUSIONS: Compared to automated method, the semi-automated method for calcium volume is acceptable and closer to manual strategy for calcium volume. Further work evaluating and confirming the performance of our semi-automated protocol is now warranted.

    Matched MeSH terms: Calcium/analysis*
  19. Baradaran S, Moghaddam E, Nasiri-Tabrizi B, Basirun WJ, Mehrali M, Sookhakian M, et al.
    Mater Sci Eng C Mater Biol Appl, 2015 Apr;49:656-668.
    PMID: 25686995 DOI: 10.1016/j.msec.2015.01.050
    The effect of the addition of an ionic dopant to calcium phosphates for biomedical applications requires specific research due to the essential roles played in such processes. In the present study, the mechanical and biological properties of Ni-doped hydroxyapatite (HA) and Ni-doped HA mixed with graphene nanoplatelets (GNPs) were evaluated. Ni (3wt.% and 6wt.%)-doped HA was synthesized using a continuous precipitation method and calcined at 900°C for 1h. The GNP (0.5-2wt.%)-reinforced 6% Ni-doped HA (Ni6) composite was prepared using rotary ball milling for 15h. The sintering process was performed using hot isostatic pressing at processing conditions of 1150°C and 160MPa with a 1-h holding time. The results indicated that the phase compositions and structural features of the products were noticeably affected by the Ni and GNPs. The mechanical properties of Ni6 and 1.5Ni6 were increased by 55% and 75% in hardness, 59% and 163% in fracture toughness and 120% and 85% in elastic modulus compared with monolithic HA, respectively. The in-vitro biological behavior was investigated using h-FOB osteoblast cells in 1, 3 and 5days of culture. Based on the osteoblast results, the cytotoxicity of the products was indeed affected by the Ni doping. In addition, the effect of GNPs on the growth and proliferation of osteoblast cells was investigated in Ni6 composites containing different ratios of GNPs, where 1.5wt.% was the optimum value.
    Matched MeSH terms: Calcium Phosphates/pharmacology; Calcium Phosphates/chemistry*
  20. Barakatun Nisak MY, Ruzita AT, Norimah AK, Gilbertson H, Nor Azmi K
    J Am Coll Nutr, 2010 Jun;29(3):161-70.
    PMID: 20833988 DOI: 10.1080/07315724.2010.10719830
    OBJECTIVES: This randomized controlled study was conducted to determine the effect of low glycemic index (GI) dietary advice on eating patterns and dietary quality in Asian patients with type 2 diabetes (T2DM).

    METHODS: Asian patients with T2DM (N  =  104) were randomized into 2 groups that received either low GI or conventional carbohydrate exchange (CCE) dietary advice for 12 weeks. Nutritional prescriptions were based on the medical nutrition therapy for T2DM, with the difference being in the GI component of the carbohydrates. Dietary intake and food choices were assessed with the use of a 3-day food record.

    RESULTS: At week 12, both groups achieved the recommendations for carbohydrate (52 ± 4% and 54 ± 4% of energy) and fat (30 ± 4% and 28 ± 5% of energy) intake. There were no significant differences in the reported macronutrient intake in both groups. With the low GI diet, crude fiber and dietary calcium intake increased, while the dietary GI reduced. Subjects in the lowest dietary glycemic index/glycemic load (GI/GL) quartile consumed more parboiled/basmati rice, pasta, milk/dairy products, fruits, and dough, which are foods from the low GI category. There was a significant reduction in the hemoglobin A(1c) level at week 12 for patients in the lowest GI/GL quartile (Δ  =  -0.7 ± 0.1%) compared with those in the highest GI/GL quartile (Δ  =  -0.1 ± 0.2%).

    CONCLUSIONS: These results demonstrate the ability of low GI dietary advice to improve the dietary quality of Asian patients with T2DM.
    Matched MeSH terms: Calcium, Dietary/administration & dosage
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links