Displaying publications 1621 - 1640 of 10377 in total

Abstract:
Sort:
  1. Fulltext Synthesis, evaluation of antioxidant activity and crystal structure of 2,4-dimethylbenzoylhydrazones
    Taha M, Ismail NH, Jamil W, Yousuf S, Jaafar FM, Ali MI, et al.
    Molecules, 2013 Sep 05;18(9):10912-29.
    PMID: 24013406 DOI: 10.3390/molecules180910912
    2,4-Dimethylbenzoylhydrazones 1-30 were synthesized by condensation reactions of 2,4-dimethylbenzoylhydrazide with various aromatic aldehydes and characterized. The assigned structures of compounds 10, 15 and 22 were further supported by single-crystal X-ray diffraction data. The synthesized compounds were evaluated for their in vitro DPPH radical scavenging activity. They exerted varying degree of scavenging activity toward DPPH radical with IC₅₀ values between 25.6-190 µM. Compounds 1, 4, 2, 3, 7, and 6 have IC₅₀ values of 25.6, 28.1, 29.3, 29.8, 30.0 and 30.1 µM respectively, showing better activity than an n-propyl gallate standard (IC₅₀ value = 30.30 µM). For super oxide anion scavenging activity compounds 1, 2 and 3 with IC₅₀ values of 98.3, 102.6, and 105.6, respectively, also showed better activity than the n-propyl gallate standard (IC₅₀ value = 106.34 µM).
    Matched MeSH terms: Biphenyl Compounds/chemistry; Picrates/chemistry; Superoxides/chemistry
  2. Fulltext Synthesis and physico-chemical properties of new tetraethylammonium-based amino acid chiral ionic liquids
    Abdul Rahman MB, Jumbri K, Basri M, Abdulmalek E, Sirat K, Salleh AB
    Molecules, 2010 Apr 05;15(4):2388-97.
    PMID: 20428050 DOI: 10.3390/molecules15042388
    This paper reports the synthesis of a series of new tetraethylammonium-based amino acid chiral ionic liquids (CILs). Their physico-chemical properties, including melting point, thermal stability, viscosity and ionic conductivity, have been comprehensively studied. The obtained results indicated that the decomposition for these salts proceeds in one step and the temperature of decomposition (T(onset)) is in the range of 168-210 degrees C. Several new CILs prepared in this work showed high ionic conductivity compared to the amino acid ionic liquids (AAILs) found in the literature.
    Matched MeSH terms: Amino Acids/chemistry*; Tetraethylammonium/chemistry*; Ionic Liquids/chemistry*
  3. Fulltext Investigating the in-vitro bioactivity, biodegradability and drug release behavior of the newly developed PES/HA/WS biocompatible nanocomposites as bone graft substitute
    Salimi E, Asim MH, Abidin MNZ
    Sci Rep, 2024 May 11;14(1):10798.
    PMID: 38734777 DOI: 10.1038/s41598-024-61586-2
    The nucleation of carbonate-containing apatite on the biomaterials surface is regarded as a significant stage in bone healing process. In this regard, composites contained hydroxyapatite (Ca10(PO4)6(OH)2, HA), wollastonite (CaSiO3, WS) and polyethersulfone (PES) were synthesized via a simple solvent casting technique. The in-vitro bioactivity of the prepared composite films with different weight ratios of HA and WS was studied by placing the samples in the simulated body fluid (SBF) for 21 days. The results indicated that the the surface of composites containing 2 wt% HA and 4 wt% WS was completely covered by a thick bone-like apatite layer, which was characterized by Grazing incidence X-ray diffraction, attenuated total reflectance-Fourier transform infrared spectrometer, field emission electron microscopy and energy dispersive X-ray analyzer (EDX). The degradation study of the samples showed that the concentration of inorganic particles could not influence the degradability of the polymeric matrix, where all samples expressed similar dexamethasone (DEX) release behavior. Moreover, the in-vitro cytotoxicity results indicated the significant cyto-compatibility of all specimens. Therefore, these findings revealed that the prepared composite films composed of PES, HA, WS and DEX could be regarded as promising bioactive candidates with low degradation rate for bone tissue engineering applications.
    Matched MeSH terms: Dexamethasone/chemistry; Polymers/chemistry; Calcium Compounds/chemistry
  4. Fulltext Controlling the degradation kinetics of porous iron by poly(lactic-co-glycolic acid) infiltration for use as temporary medical implants
    Yusop AH, Daud NM, Nur H, Kadir MR, Hermawan H
    Sci Rep, 2015;5:11194.
    PMID: 26057073 DOI: 10.1038/srep11194
    Iron and its alloy have been proposed as biodegradable metals for temporary medical implants. However, the formation of iron oxide and iron phosphate on their surface slows down their degradation kinetics in both in vitro and in vivo scenarios. This work presents new approach to tailor degradation behavior of iron by incorporating biodegradable polymers into the metal. Porous pure iron (PPI) was vacuum infiltrated by poly(lactic-co-glycolic acid) (PLGA) to form fully dense PLGA-infiltrated porous iron (PIPI) and dip coated into the PLGA to form partially dense PLGA-coated porous iron (PCPI). Results showed that compressive strength and toughness of the PIPI and PCPI were higher compared to PPI. A strong interfacial interaction was developed between the PLGA layer and the iron surface. Degradation rate of PIPI and PCPI was higher than that of PPI due to the effect of PLGA hydrolysis. The fast degradation of PIPI did not affect the viability of human fibroblast cells. Finally, this work discusses a degradation mechanism for PIPI and the effect of PLGA incorporation in accelerating the degradation of iron.
    Matched MeSH terms: Iron/chemistry*; Polyglycolic Acid/chemistry*; Lactic Acid/chemistry*
  5. Organophosphate esters in water and air: A minireview of their sources, occurrence, and air-water exchange
    Marlina N, Hassan F, Chao HR, Latif MT, Yeh CF, Horie Y, et al.
    Chemosphere, 2024 May;356:141874.
    PMID: 38575079 DOI: 10.1016/j.chemosphere.2024.141874
    Organophosphate esters (OPEs) have received considerable attention in environmental research due to their extensive production, wide-ranging applications, prevalent presence, potential for bioaccumulation, and associated ecological and health concerns. Low efficiency of OPE removal results in the effluents of wastewater treatment plants emerging as a significant contributor to OPE contamination. Their notable solubility and mobility give OPEs the potential to be transported to coastal ecosystems via river discharge and atmospheric deposition. Previous research has indicated that OPEs have been widely detected in the atmosphere and water bodies. Atmospheric deposition across air-water exchange is the main input route for OPEs into the environment and ecosystems. The main processes that contribute to air-water exchange is air-water diffusion, dry deposition, wet deposition, and the air-water volatilization process. The present minireview links together the source, occurrence, and exchange of OPEs in water and air, integrates the occurrence and profile data, and summarizes their air-water exchange in the environment.
    Matched MeSH terms: Atmosphere/chemistry; Water/chemistry; Waste Water/chemistry
  6. Effect of pyrolysis temperature on characteristics and chloramphenicol adsorption performance of NH2-MIL-53(Al)-derived amine-functionalized porous carbons
    Tran TV, Jalil AA, Nguyen DTC, Nguyen TTT, Nguyen LTT, Nguyen CV, et al.
    Chemosphere, 2024 May;355:141599.
    PMID: 38548079 DOI: 10.1016/j.chemosphere.2024.141599
    Several activities such as aquaculture, human and feedstock therapies can directly release antibiotics into water. Due to high stability, low hydrolysis and non-biodegradation, they can accumulate in the aqueous environment and transport to aquatic species. Here, we synthesized amine-functionalized porous carbons (ANC) by a direct-pyrolysis process of NH2-MIL-53(Al) as a sacrificial template at between 600 and 900 °C and utilized them to eliminate chloramphenicol antibiotic from water. The NH2-MIL-53(Al)-derived porous carbons obtained high surface areas (304.7-1600 m2 g-1) and chloramphenicol adsorption capacities (148.3-261.5 mg g-1). Several factors such as hydrogen bonding, Yoshida hydrogen bonding, and π-π interaction, hydrophobic interaction possibly controlled adsorption mechanisms. The ANC800 could be reused four cycles along with high stability in structure. As a result, NH2-MIL-53(Al)-derived porous carbons are recommended as recyclable and efficient adsorbents to the treatment of antibiotics in water.
    Matched MeSH terms: Anti-Bacterial Agents/chemistry; Carbon/chemistry; Water/chemistry
  7. Electrochemical genosensor based on RNA-responsive human telomeric G-quadruplex DNA: A proof-of-concept with SARS-CoV-2 RNA
    Ibrahim N, Gan KB, Mohd Yusof NY, Goh CT, Krupa B N, Tan LL
    Talanta, 2024 Jul 01;274:125916.
    PMID: 38547835 DOI: 10.1016/j.talanta.2024.125916
    In this report, a facile and label-free electrochemical RNA biosensor is developed by exploiting methylene blue (MB) as an electroactive positive ligand of G-quadruplex. The electrochemical response mechanism of the nucleic acid assay was based on the change in differential pulse voltammetry (DPV) signal of adsorbed MB on the immobilized human telomeric G-quadruplex DNA with a loop that is complementary to the target RNA. Hybridization between synthetic positive control RNA and G-quadruplex DNA probe on the transducer platform rendered a conformational change of G-quadruplex to double-stranded DNA (dsDNA), and increased the redox current of cationic MB π planar ligand at the sensing interface, thereby the electrochemical signal of the MB-adsorbed duplex is proportional to the concentration of target RNA, with SARS-CoV-2 (COVID-19) RNA as the model. Under optimal conditions, the target RNA can be detected in a linear range from 1 zM to 1 μM with a limit of detection (LOD) obtained at 0.59 zM for synthetic target RNA and as low as 1.4 copy number for positive control plasmid. This genosensor exhibited high selectivity towards SARS-CoV-2 RNA over other RNA nucleotides, such as SARS-CoV and MERS-CoV. The electrochemical RNA biosensor showed DPV signal, which was proportional to the 2019-nCoV_N_positive control plasmid from 2 to 200000 copies (R2 = 0.978). A good correlation between the genosensor and qRT-PCR gold standard was attained for the detection of SARS-CoV-2 RNA in terms of viral copy number in clinical samples from upper respiratory specimens.
    Matched MeSH terms: DNA/chemistry; Methylene Blue/chemistry; Telomere/chemistry
  8. Fulltext Crystallization and preliminary X-ray crystallographic analysis of a thermostable organic solvent-tolerant lipase from Bacillus sp. strain 42
    Khusaini MS, Rahman RN, Mohamad Ali MS, Leow TC, Basri M, Salleh AB
    Acta Crystallogr Sect F Struct Biol Cryst Commun, 2011 Mar 01;67(Pt 3):401-3.
    PMID: 21393852 DOI: 10.1107/S1744309111002028
    An organic solvent-tolerant lipase from Bacillus sp. strain 42 was crystallized using the capillary-tube method. The purpose of studying this enzyme was in order to better understand its folding and to characterize its properties in organic solvents. By initially solving its structure in the native state, further studies on protein-solvent interactions could be performed. X-ray data were collected at 2.0 Å resolution using an in-house diffractometer. The estimated crystal dimensions were 0.09×0.19×0.08 mm. The crystal belonged to the monoclinic space group C2, with unit-cell parameters a=117.41, b=80.85, c=99.44 Å, β=96.40°.
    Matched MeSH terms: Bacterial Proteins/chemistry*; Lipase/chemistry*; Solvents/chemistry*
  9. Fulltext Highly porous regenerated cellulose hydrogel and aerogel prepared from hydrothermal synthesized cellulose carbamate
    Gan S, Zakaria S, Chia CH, Chen RS, Ellis AV, Kaco H
    PLoS One, 2017;12(3):e0173743.
    PMID: 28296977 DOI: 10.1371/journal.pone.0173743
    Here, a stable derivative of cellulose, called cellulose carbamate (CC), was produced from Kenaf (Hibiscus cannabinus) core pulp (KCP) and urea with the aid of a hydrothermal method. Further investigation was carried out for the amount of nitrogen yielded in CC as different urea concentrations were applied to react with cellulose. The effect of nitrogen concentration of CC on its solubility in a urea-alkaline system was also studied. Regenerated cellulose products (hydrogels and aerogels) were fabricated through the rapid dissolution of CC in a urea-alkaline system. The morphology of the regenerated cellulose products was viewed under Field emission scanning electron microscope (FESEM). The transformation of allomorphs in regenerated cellulose products was examined by X-ray diffraction (XRD). The transparency of regenerated cellulose products was determined by Ultraviolet-visible (UV-Vis) spectrophotometer. The degree of swelling (DS) of regenerated cellulose products was also evaluated. This investigation provides a simple and efficient procedure of CC determination which is useful in producing regenerated CC products.
    Matched MeSH terms: Carbamates/chemistry*; Cellulose/chemistry*; Hydrogels/chemistry*
  10. A new step in kinetic proofreading due to misacylated-tRNA during ribosomal peptide bond formation
    Monajemi H, M Zain S, Wan Abdullah WAT
    Nucleosides Nucleotides Nucleic Acids, 2021;40(6):635-646.
    PMID: 34047250 DOI: 10.1080/15257770.2021.1923742
    The translational accuracy in protein synthesis is contributed to by several mechanisms in the ribosome, generally called kinetic proofreading. This process in the ribosome inhibits the non-cognate codon-anticodon interaction. However, it is not sufficient for fidelity of protein synthesis since a wrong amino acid can easily be added to the growing polypeptide chain if a tRNA while cognate to the mRNA, carries a non-cognate amino acid. Therefore, additional to the kinetic proofreading, there must be some hitherto unknown characteristic in misacylated-tRNAs to stop the process of protein synthesis if such misacylated-tRNA is accommodated in the ribosomal A-site. In order to understand this characteristic, we have performed computational quantum chemistry analysis on five different tRNA molecules, each one attached to five different amino acids with one being cognate to the tRNA and the other four non-cognate. This study shows the importance of aminoacyl-tRNA binding energy in ensuring fidelity of protein synthesis.
    Matched MeSH terms: Anticodon/chemistry; Peptides/chemistry; RNA, Transfer, Amino Acyl/chemistry
  11. Interaction of zein/HP-β-CD nanoparticles with digestive enzymes: Enhancing curcumin bioavailability
    Zhang Z, Miao W, Ji H, Lin Q, Li X, Sang S, et al.
    Food Chem, 2024 Dec 01;460(Pt 3):140792.
    PMID: 39126939 DOI: 10.1016/j.foodchem.2024.140792
    The low bioavailability of polyphenolic compounds due to poor solubility and stability is a major challenge. Encapsulation of polyphenols in zein-based composite nanoparticles can improve the water dispersion, stability, targeted delivery, and controlled release of polyphenols in the gastrointestinal tract. In this study, we investigated the fluorescence properties, bioactivity, and microstructural characteristics of polyphenols during digestion, revealing that zein nanoparticles protect polyphenols from gastric degradation and promote their sustained release in the small intestine. The effects of different ionic species and salt ion concentrations on the digestive properties of polyphenol complex delivery systems have also been explored. In addition, the formation of "protein corona" structures during digestion may affect bioavailability. These findings highlight the potential of nanoparticle formulations to improve polyphenol stability and absorption. The results of this study may provide new insights and references for the study of polyphenol bioavailability enhancement.
    Matched MeSH terms: Drug Carriers/chemistry; beta-Cyclodextrins/chemistry; Polyphenols/chemistry
  12. Bio-inspired magnetic chitosan/Iron oxide macromolecules for multiple anionic dyes adsorption from aqueous media
    Vijayasree VP, Abdul Manan NS
    Int J Biol Macromol, 2024 Oct;277(Pt 1):134103.
    PMID: 39047997 DOI: 10.1016/j.ijbiomac.2024.134103
    Organic anionic dyes are major water pollutants due to their low degradability caused by complex aromatic structures. Not only do they exert toxic, mutagenic, teratogenic, tumorigenic, and genotoxic effects, but they also decrease fertility and cause irritation to the skin and respiratory system in humans. This long-term toxicity has detrimental effects on aquatic organisms and their surroundings, resulting in an imbalanced ecosystem. In this study, a Cs@Fe3O4 magnetic biosorbent was synthesised to uptake three anionic dyes and characterised for FTIR, BET/BJH, XRD, TGA, VSM, and FESEM analyses. The biosorbent average surface area was confirmed to be 52.6524 m2/g, with average pore sizes of 7.3606 nm and 6.9823 nm for adsorption-desorption processes, respectively. Batch adsorption studies pH values, contact times, temperature, initial dye concentrations, and adsorbent dosages were examined. Several isotherm and kinetic models were studied to determine the adsorption mechanism. The adsorption data of these dyes at equilibrium was observed to match Langmuir's isotherm and pseudo-second-order kinetic models. The thermodynamic study revealed that the adsorption process for these dyes was an exothermic reaction. Maximum adsorption capacities for congo red, methyl orange, and metanil yellow were 117.77 mg/g, 137.77 mg/g, and 155.57 mg/g, respectively. The reusability of recovered Cs@Fe3O4 after dye adsorption was evaluated up to five continuous adsorption-desorption cycles for its possible industrial applications.
    Matched MeSH terms: Anions/chemistry; Ferric Compounds/chemistry; Water/chemistry
  13. Recent advancements in bamboo nanocellulose-based bioadsorbents and their potential in wastewater applications: A review
    Othman JAS, Ilyas RA, Nordin AH, Ngadi N, Alkbir MFM
    Int J Biol Macromol, 2024 Oct;277(Pt 3):134451.
    PMID: 39102907 DOI: 10.1016/j.ijbiomac.2024.134451
    The research interest in sustainable and eco-friendly materials based on natural sources has increased dramatically due to their recyclability, biodegradability, compatibility, and nontoxic behavior. Recently, nanocellulose-based green composites are under extensive exploration and have gained popularity among researchers owing to their lightweight, lost cost, low density, excellent mechanical and physical characteristics. This review provides a comprehensive overview of the recent advancements in the extraction, modification, and application of bamboo nanocellulose as a high-performance bioadsorbent. Bamboo, a rapidly renewable resource, offers an eco-friendly alternative to traditional materials due to its abundant availability and unique structural properties. Significantly, bamboo comprises a considerable amount of cellulose, approximately 40 % to 50%, rendering it a valuable source of cellulose fiber for the fabrication of cellulose nanocrystals. The review highlights different various modification techniques which enhance the adsorption capacities and selectivity of bamboo nanocellulose. Furthermore, the integration of bamboo nanocellulose into novel composite materials and its performance in removing contaminants such as heavy metals, dyes, and organic pollutants from wastewater are critically analyzed. Emphasis is placed on the mechanisms of adsorption, regeneration potential, and the economic and environmental benefits of using bamboo-based bioadsorbents. The findings underscore the potential of bamboo nanocellulose to play a pivotal role in developing sustainable wastewater treatment technologies, offering a promising pathway towards cleaner water and a greener future.
    Matched MeSH terms: Water Pollutants, Chemical/chemistry; Sasa/chemistry; Nanoparticles/chemistry
  14. Fulltext Bioactive polymer composite scaffolds fabricated from 3D printed negative molds enable bone formation and vascularization
    Du S, Huynh T, Lu YZ, Parker BJ, Tham SK, Thissen H, et al.
    Acta Biomater, 2024 Sep 15;186:260-274.
    PMID: 39089351 DOI: 10.1016/j.actbio.2024.07.038
    Scaffolds for bone defect treatment should ideally support vascularization and promote bone formation, to facilitate the translation into biomedical device applications. This study presents a novel approach utilizing 3D-printed water-dissolvable polyvinyl alcohol (PVA) sacrificial molds to engineer polymerized High Internal Phase Emulsion (polyHIPE) scaffolds with microchannels and distinct multiscale porosity. Two sacrificial mold variants (250 µm and 500 µm) were generated using fused deposition modeling, filled with HIPE, and subsequently dissolved to create polyHIPE scaffolds containing microchannels. In vitro assessments demonstrated significant enhancement in cell infiltration, proliferation, and osteogenic differentiation, underscoring the favorable impact of microchannels on cell behavior. High loading efficiency and controlled release of the osteogenic factor BMP-2 were achieved, with microchannels facilitating release of the growth factor. Evaluation in a mouse critical-size calvarial defect model revealed enhanced vascularization and bone formation in microchanneled scaffolds containing BMP-2. This study not only introduces an accessible method for creating multiscale porosity in polyHIPE scaffolds but also emphasizes its capability to enhance cellular infiltration, controlled growth factor release, and in vivo performance. The findings suggest promising applications in bone tissue engineering and regenerative medicine, and are expected to facilitate the translation of this type of biomaterial scaffold. STATEMENT OF SIGNIFICANCE: This study holds significance in the realm of biomaterial scaffold design for bone tissue engineering and regeneration. We demonstrate a novel method to introduce controlled multiscale porosity and microchannels into polyHIPE scaffolds, by utilizing 3D-printed water-dissolvable PVA molds. The strategy offers new possibilities for improving cellular infiltration, achieving controlled release of growth factors, and enhancing vascularization and bone formation outcomes. This microchannel approach not only marks a substantial stride in scaffold design but also demonstrates its tangible impact on enhancing osteogenic cell differentiation and fostering robust bone formation in vivo. The findings emphasize the potential of this methodology for bone regeneration applications, showcasing an interesting advancement in the quest for effective and innovative biomaterial scaffolds to regenerate bone defects.
    Matched MeSH terms: Biocompatible Materials/chemistry; Polymers/chemistry; Polyvinyl Alcohol/chemistry
  15. One-pot synthesis of polysaccharide/gelatin amorphous hydrogels impregnated with a bioflavonoid derived from Elaeis guineensis leaf: wound healing and drug release properties
    Che Zain MS, Danish M, Shaari K, Fakurazi S
    Daru, 2024 Dec;32(2):689-703.
    PMID: 39340725 DOI: 10.1007/s40199-024-00540-z
    BACKGROUND: Amorphous hydrogel is a strategic wound healing dressings that comprised of water, polymers and excipients with no shape. The dense cross-linked network of polymer is interspersed by the immobilized water component could rehydrate and promote healing in wound tissue.

    OBJECTIVE: In this work, various polysaccharide/gelatin amorphous hydrogels with the impregnation of oil palm leaf derived total flavonoid enriched extract (OPL-TFEE) were fabricated via one-pot synthesis method to provide multiple crosslinking networks.

    METHOD: The bioflavonoids (OPL-TFEE) were derived from Elaeis guineensis leaf using an integrated green extraction and enrichment process. Amorphous hydrogels with good wound healing properties were developed by incorporating 0.3% antioxidant agent into the hybrid polymeric gelling system.

    RESULT: The formulations appeared as a semi-solid dark yellow translucent hydrogel with good spreading and consistency characteristics and satisfying aesthetic properties. The FTIR analysis indicated that the bioflavonoid was compatible with the matrix, and the hydrogels showed porous morphological structures when observed under SEM. Furthermore, the hydrogels possessed shear thinning, pseudoplastic, and elastic properties. Bioflavonoids-impregnated polysaccharide/gelatin hydrogel release 95-98% bioflavonoids within 24 h, while the drug release profile followed the Korsmeyer-Peppas kinetic model. The hydrogels showed antioxidant and wound healing properties with no sign of cytotoxicity.

    CONCLUSION: Overall, the results revealed bioflavonoid-loaded hydrogels exhibited good physicochemical and biological properties, thus could serve as new innovative formulation in the sustainable advancement of wound care product for promoting wound healing.

    Matched MeSH terms: Antioxidants/chemistry; Plant Extracts/chemistry; Sapotaceae/chemistry
  16. Hispidacine, an unusual 8,4'-oxyneolignan-alkaloid with vasorelaxant activity, and hispiloscine, an antiproliferative phenanthroindolizidine alkaloid, from Ficus hispida Linn
    Yap VA, Loong BJ, Ting KN, Loh SH, Yong KT, Low YY, et al.
    Phytochemistry, 2015 Jan;109:96-102.
    PMID: 25468714 DOI: 10.1016/j.phytochem.2014.10.032
    Hispidacine, an 8,4'-oxyneolignan featuring incorporation of an unusual 2-hydroxyethylamine moiety at C-7, and hispiloscine, a phenanthroindolizidine alkaloid, were isolated from the stem-bark and leaves of the Malaysian Ficus hispida Linn. Their structures were established by spectroscopic analysis. Hispidacine induced a moderate vasorelaxant activity in rat isolated aorta, while hispiloscine showed appreciable antiproliferative activities against MDA-MB-231, MCF-7, A549, HCT-116 and MRC-5 cell lines.
    Matched MeSH terms: Alkaloids/chemistry*; Antineoplastic Agents, Phytogenic/chemistry*; Indolizines/chemistry; Phenanthrolines/chemistry; Vasodilator Agents/chemistry*; Lignans/chemistry*; Plant Leaves/chemistry; Plant Bark/chemistry; Ficus/chemistry*; Indolizidines/chemistry
  17. A new symmetrical tetramer oligostilbenoid containing tetrahydrofuran ring from the stem bark of Dryobalanops lanceolata
    Ahmat N, Wibowo A, Mohamad SA, Low AL, Sufian AS, Yusof MI, et al.
    J Asian Nat Prod Res, 2014;16(11):1099-107.
    PMID: 25034352 DOI: 10.1080/10286020.2014.938059
    A new tetramer oligostilbenoid possessing tetrahydrofuran ring, malaysianol C (1), was isolated from the acetone extract of the stem bark of Dryobalanops lanceolata, together with four known oligostilbenoids nepalensinol E (2), ϵ-viniferin (3), laevifonol (4), and ampelopsin F (5). The structures of isolated compounds were elucidated on the basis of spectral evidence. The antibacterial activity of the isolated compounds was evaluated using resazurin microtitre-plate assay, whereas the cytotoxic activity was tested using MTT assay. The plausible biogenetic routes of the isolated compounds are also discussed.
    Matched MeSH terms: Anti-Bacterial Agents/chemistry; Antineoplastic Agents, Phytogenic/chemistry; Benzofurans/chemistry; Flavonoids/chemistry; Furans/chemistry; Plant Extracts/chemistry; Stilbenes/chemistry; Plant Stems/chemistry; Plant Bark/chemistry; Dipterocarpaceae/chemistry*
  18. Fulltext Assessment of extraction parameters on antioxidant capacity, polyphenol content, epigallocatechin gallate (EGCG), epicatechin gallate (ECG) and iriflophenone 3-C-β-glucoside of agarwood (Aquilaria crassna) young leaves
    Tay PY, Tan CP, Abas F, Yim HS, Ho CW
    Molecules, 2014 Aug 14;19(8):12304-19.
    PMID: 25153858 DOI: 10.3390/molecules190812304
    The effects of ethanol concentration (0%-100%, v/v), solid-to-solvent ratio (1:10-1:60, w/v) and extraction time (30-180 min) on the extraction of polyphenols from agarwood (Aquilaria crassna) were examined. Total phenolic content (TPC), total flavonoid content (TFC) and total flavanol (TF) assays and HPLC-DAD were used for the determination and quantification of polyphenols, flavanol gallates (epigallocatechin gallate--EGCG and epicatechin gallate--ECG) and a benzophenone (iriflophenone 3-C-β-glucoside) from the crude polyphenol extract (CPE) of A. crassna. 2,2'-Diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity was used to evaluate the antioxidant capacity of the CPE. Experimental results concluded that ethanol concentration and solid-to-solvent ratio had significant effects (p<0.05) on the yields of polyphenol and antioxidant capacity. Extraction time had an insignificant influence on the recovery of EGCG, ECG and iriflophenone 3-C-β-glucoside, as well as radical scavenging capacity from the CPE. The extraction parameters that exhibited maximum yields were 40% (v/v) ethanol, 1:60 (w/v) for 30 min where the TPC, TFC, TF, DPPH, EGCG, ECG and iriflophenone 3-C-β-glucoside levels achieved were 183.5 mg GAE/g DW, 249.0 mg QE/g DW, 4.9 mg CE/g DW, 93.7%, 29.1 mg EGCG/g DW, 44.3 mg ECG/g DW and 39.9 mg iriflophenone 3-C-β-glucoside/g DW respectively. The IC50 of the CPE was 24.6 mg/L.
    Matched MeSH terms: Ethanol/chemistry; Catechin/chemistry; Flavonoids/chemistry; Glucosides/chemistry; Plant Extracts/chemistry; Solvents/chemistry; Free Radical Scavengers/chemistry; Plant Leaves/chemistry*; Thymelaeaceae/chemistry*; Polyphenols/chemistry
  19. Fulltext Cosmos caudatus as a potential source of polyphenolic compounds: optimisation of oven drying conditions and characterisation of its functional properties
    Mediani A, Abas F, Khatib A, Tan CP
    Molecules, 2013 Aug 29;18(9):10452-64.
    PMID: 23994970 DOI: 10.3390/molecules180910452
    The aim of the study was to analyze the influence of oven thermal processing of Cosmos caudatus on the total polyphenolic content (TPC) and antioxidant capacity (DPPH) of two different solvent extracts (80% methanol, and 80% ethanol). Sonication was used to extract bioactive compounds from this herb. The results showed that the optimised conditions for the oven drying method for 80% methanol and 80% ethanol were 44.5 °C for 4 h with an IC₅₀ of 0.045 mg/mL and 43.12 °C for 4.05 h with an IC₅₀ of 0.055 mg/mL, respectively. The predicted values for TPC under the optimised conditions for 80% methanol and 80% ethanol were 16.5 and 15.8 mg GAE/100 g DW, respectively. The results obtained from this study demonstrate that Cosmos caudatus can be used as a potential source of antioxidants for food and medicinal applications.
    Matched MeSH terms: Ethanol/chemistry; Methanol/chemistry; Biphenyl Compounds/chemistry; Free Radicals/chemistry; Picrates/chemistry; Plant Extracts/chemistry; Solvents/chemistry; Free Radical Scavengers/chemistry; Asteraceae/chemistry*; Polyphenols/chemistry
  20. Fulltext Antioxidant Activity and Total Phenolic and Flavonoid Content of Various Solvent Extracts from In Vivo and In Vitro Grown Trifolium pratense L. (Red Clover)
    Khorasani Esmaeili A, Mat Taha R, Mohajer S, Banisalam B
    Biomed Res Int, 2015;2015:643285.
    PMID: 26064936 DOI: 10.1155/2015/643285
    In the present study the extracts of in vivo and in vitro grown plants as well as callus tissue of red clover were tested for their antioxidant activities, using different extraction solvent and different antioxidant assays. The total flavonoid and phenolic contents as well as extraction yield of the extracts were also investigated to determine their correlation with the antioxidant activity of the extracts. Among all the tested extracts the highest amounts of total phenolic and total flavonoids content were found in methanol extract of in vivo grown plants. The antioxidant activity of tested samples followed the order in vivo plant extract > callus extract > in vitro extract. The highest reducing power, 2,2-azino-bis-(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) radical scavenging, and chelating power were found in methanol extracts of in vivo grown red clover, while the chloroform fraction of in vivo grown plants showed the highest 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging, superoxide anion radical scavenging and hydrogen peroxide scavenging compared to the other tested extracts. A significant correlation was found between the antioxidant activity of extracts and their total phenolic and total flavonoid content. According to the findings, the extract of in vitro culture of red clover especially the callus tissue possesses a comparable antioxidant activity to the in vivo cultured plants' extract.
    Matched MeSH terms: Antioxidants/chemistry*; Biphenyl Compounds/chemistry; Flavonoids/chemistry; Phenols/chemistry; Picrates/chemistry; Plant Extracts/chemistry*; Superoxides/chemistry; Free Radical Scavengers/chemistry; Plant Leaves/chemistry; Trifolium/chemistry*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links