The polyphenolic profiles and antioxidant activities of the water extracts of Barringtonia racemosa shoots (leaves and stems) were explored. Two methods, freeze drying and air drying, for preparation of the shoots, were also compared. Freeze drying was better as air drying caused 5-41% reduction of polyphenols. Three phenolic acids and three flavonoids were identified, using UHPLC. The descending order of polyphenols in the leaves and stems was gallic acid>ellagic acid>quercetin>protocatechuic acid>rutin>kaempferol. In vitro antioxidant analyses were performed using biological samples. In the LDL oxidation assay, B. racemosa leaf extract (IC50=73.0μg/ml) was better than stem extract (IC50=226μg/ml) at inhibiting the formation of TBARS and lipid hydroperoxides. Similar trends were observed for serum and haemoglobin oxidation. B. racemosa leaf extract was better than its stem extract in delaying the time required to oxidise haemoglobin to methaemoglobin. The high polyphenolic content of B. racemosa shoots could have contributed towards their antioxidative effects.
The influence of human salivary enzymes on palm wines' odorant concentrations were investigated by the application of aroma extracts dilution analysis (AEDA) and by the calculation of odour activity values (OAVs), respectively. The odorants were quantified by means of stable isotope dilution assays (SIDA), and the degradation profiles of odorants by human saliva were also studied. Results revealed 46 odour-active compounds in the flavour dilution (FD) factor range of 4-256, and all were subsequently identified. Of the 46 odorants, 41 were identified in the Elaeis guineensis wine, 36 in Raphia hookeri wine and 29 in Borassus flabellifer wine. Among the odorants, the highest FD-factors were obtained from acetoin, 2-acetyl-1-pyrroline and 3-isobutyl-2-methoxypyrazine. Among the 13 potent odorants identified, five aroma compounds are reported here as important contributors to palm wine aroma, namely 3-isobutyl-2-methoxy-pyrazine, acetoin, 2-acetyl-1-pyrroline, 3-methylbutylacetate and ethyl hexanoate. Meanwhile, salivary enzymic degradation of odorants was more pronounced among the aldehydes, esters and thiols.
Durian seed is an agricultural biomass waste of durian fruit. It can be a natural plant source of non-starch polysaccharide gum with potential functional properties. The main goal of the present study was to investigate the effect of chemical extraction variables (i.e., the decolouring time, soaking temperature and soaking time) on the physicochemical properties of durian seed gum. The physicochemical and functional properties of chemically-extracted durian seed gum were assessed by determining the particle size and distribution, solubility and the water- and oil-holding capacity (WHC and OHC). The present work revealed that the soaking time should be considered as the most critical extraction variable affecting the physicochemical properties of crude durian seed gum.
To examine the acaricidal effects of the essential oil of Cymbopogon citratus leaf extract (lemongrass) and ethanolic Azadirachta indica leaf extract (neem) against house dust mites Dermatophagoides farinae (D. farinae) and Dermatophagoides pteronyssinus (D. pteronyssinus).
C. asiatica was exposed to various fermentations: no fermentation (0 min), partial fermentation (120 min) and full fermentation (24 h). Total phenolic content (TPC) and ferric-reducing antioxidant power (FRAP) of C. asiatica infusions were studied as a function of water temperature (60, 80 or 100 °C), the brewing stage (one, two or three) and the brewing time (1, 3, 5, 10, 15 or 20 min). The optimum brewing procedure was adopted to study the antioxidant properties and phenolic compounds in C. asiatica infusions.
Solvolysis of oil palm empty fruit bunches (EFB) fibres using different solvents (acetone, ethylene glycol (EG), ethanol, water and toluene) were carried out using an autoclave at 275°C for 60 min. The solvent efficiency in term of conversion yield was found to be: EG>water>ethanol>acetone>toluene. The liquid products and residue obtained were analyzed using Fourier transform infrared spectroscopy (FTIR) and gas chromatography/mass selectivity. The obtained results showed that the chemical properties of the oil product were significantly affected by the type of solvent used for the solvolysis process. The higher heating value (HHV) of oil products obtained using ethanol is ∼29.42 MJ/kg, which is the highest among the oil products produced using different solvents. Water, ethanol and toluene yield major phenolic compounds. While EG favors the formation of alcohol compounds and acetone yields ketone and aldehyde compounds.
Engkabang fat esters were produced via alcoholysis reaction between Engkabang fat and oleyl alcohol, catalyzed by Lipozyme RM IM. The reaction was carried out in a 500 ml Stirred tank reactor using heptane and hexane as solvents. Response surface methodology (RSM) based on a four-factor-five-level Central composite design (CCD) was applied to evaluate the effects of synthesis parameters, namely temperature, substrate molar ratio (oleyl alcohol: Engkabang fat), enzyme amount and impeller speed. The optimum yields of 96.2% and 91.4% were obtained for heptane and hexane at the optimum temperature of 53.9°C, impeller speeds of 309.5 and 309.0 rpm, enzyme amounts of 4.82 and 5.65 g and substrate molar ratios of 2.94 and 3.39:1, respectively. The actual yields obtained compared well with the predicted values of 100.0% and 91.5%, respectively. Meanwhile, the properties of the esters show that they are suitable to be used as ingredient for cosmetic applications.
Six prenylated flavones, including one new compound, were isolated and identified from the stem bark extracts of Artocarpus altilis. The new prenylated flavone hydroxyartocarpin (1) was characterized as 3-(gamma,gamma-dimethylallyl)-6-isopentenyl-5,8,2',4'-tetrahydroxy-7-methoxyflavone and the known compounds were artocarpin (2), morusin (3), cycloartobiloxanthone (4), cycloartocarpin A (5) and artoindonesianin V (6). The structures of the compounds were determined by spectroscopic methods (IR, MS, (1)H-NMR and (13)C-NMR) and comparison with published data for the known compounds.
Two new flavone rhamnosides, apigenin 7-O-alpha-L-rhamnopyranosyl-(1-->4)-O-alpha-L-rhamnopyranoside and apigenin 7-O-alpha-L-rhamnopyranosyl-(1-->4)-O-alpha-L-rhamnopyranoside-4'-O-alpha-L-rhamnopyranoside were isolated from the fronds of Asplenium normale D. Don, together with two known C-glycosylflavones, vicenin-2 and lucenin-2. The chemical structures of the isolated glycosides were established by UV, LC-MS, characterization of acid hydrolysates, and 1H and 13C NMR spectroscopy.
The antioxidant activity of fresh and dried plant extracts of Paederia foetida and Syzygium aqueum were studied using beta-carotene bleaching and the 2,2'-azinobis(3-ethyl-benzothiazoline-6-sulfonic acid) (ABTS) radical cation assay. The percentage of antioxidant activity for all extract samples using both assays was between 58 and 80%. The fresh samples of both plants had higher antioxidant activity than the dried samples. The results of the beta-carotene bleaching assay were correlated (R(2) = 0.9849) with those of the ABTS assay.
The effect of chemical pretreatments using NaOH, H(2)O(2), and Ca(OH)(2) on Empty Palm Fruit Bunches (EPFB) to degrade EPFB lignin before pyrolysis was investigated. Spectrophotometer analysis proved consecutive addition of NaOH and H(2)O(2) decomposed almost 100% of EPFB lignin compared to 44% for the Ca(OH)(2), H(2)O(2) system while NaOH and Ca(OH)(2) used exclusively could not alter lignin much. Next, the pretreated EPFB was catalytically pyrolyzed. Experimental results indicated the phenolic yields over Al-MCM-41 and HZSM-5 catalysts were 90 wt% and 80 wt%, respectively compared to 67 wt% yield for the untreated sample under the same set of conditions. Meanwhile, the experiments with HY zeolite yielded 70 wt% phenols.
The leaves of Melicope ptelefolia (Rutaceae) afforded a new acetophenone named 2,4,6-trihydroxy-3-geranylacetophenone. The structure of the compound was established by mass and NMR spectroscopy.
Lumusidines A-D, bisindole alkaloids of the macroline-macroline type, and one of the macroline-pleiocarpamine type, villalstonidine F, were isolated from the stem-bark extract of Alstonia macrophylla (Apocynaceae). The structures and absolute configurations of these alkaloids were established using NMR, MS, and X-ray diffraction analyses.
A new megastigmane diglycoside was isolated from the leaves of Carallia brachiata. The structure was determined by spectroscopic methods as 3-hydroxy-5,6-epoxy-beta-ionol -3-O-beta-apiofuranosyl-(1-->6)-beta-glucopyranoside (1). Additionally, 29 known compounds consisting of two megastigmanes, one 1,2-dithiolane derivative, seven aromatic compounds, five condensed tannins, 12 flavonoids, and two glyceroglycolipids were isolated and identified.
Orchidaceae is the largest family of flowering plants with over 35,000 species and 850 genera. About 3300 species of orchids are found in Malaysia and the diversity is highest in the Main, Keledang, Bintang and Tahan Ranges. Apart from being prized for their beauty, orchids have long been used by humans for medicinal purposes. Today the uses of orchids have been expanded to the food and cosmetics industries. Many cosmeceutical companies use orchid extracts as an active ingredient in their products. Previous studies provide riveting insights into the potential uses of orchid extracts as an active agent in cosmetics. This paper describes the cosmeceutical potential of orchids as an anti-aging, and skin moisturizing agent. Orchid extracts from Vanda coerulea and V. teres delay aging caused by reactive oxygen species (ROS) following LV irradiation through their antioxidant and anti-inflammatory activity. These extracts also show anti-aging properties by stimulating cytochrome c oxidase (complex IV), which is part of the electron transport chain in mitochondria. Stimulation of cytochrome c oxidase improves the respiratory function of mitochondria in keratinocytes. The presence of mucilage in orchids enables them to maintain skin hydration. Mucilage functions as a moisturizer and emollient due to its high water binding capacity. Additionally, orchid extracts provide skin hydration by stimulating aquaporin 3 (AQP3) and LEKTI protein expression. The presence of AQP3 leads to a five-fold increase in water permeability, which subsequently increases stratum corneum hydration. Increased LEKTI protein expression mediated by orchid extracts reduces the degradation of desmoglein-1 and enhances the structural function of desmosomes, which play important roles in preventing water evaporation.
E. longifolia is attracting interest due to its pharmacological properties and pro-vitality effects. In this study, an online SPE-LC approach using polystyrene divinyl benzene (PSDVB) and C18 columns was developed in obtaining chromatographic fingerprints of E. longifolia. E. longifolia root samples were extracted using pressurized liquid extraction (PLE) technique prior to online SPE-LC. The effects of mobile phase compositions and column switching time on the chromatographic fingerprint were optimized. Validation of the developed method was studied based on eurycomanone. Linearity was in the range of 5 to 50 µg∙mL(-1) (r² = 0.997) with 3.2% relative standard deviation of peak area. The developed method was used to analyze 14 E. longifolia root samples and 10 products (capsules). Selected chemometric techniques: cluster analysis (CA), discriminant analysis (DA), and principal component analysis (PCA) were applied to the fingerprint datasets of 37 selected peaks to evaluate the ability of the chromatographic fingerprint in classifying quality of E. longifolia. Three groups were obtained using CA. DA yielded 100% correlation coefficient with 19 discriminant compounds. Using PCA, E. longifolia root samples were clearly discriminated from the products. This study showed that the developed online SPE-LC method was able to provide comprehensive evaluation of E. longifolia samples for quality control purposes.
Ghritas are ayurvedic lipid based preparations in which oil or ghee is boiled with prescribed kasaya (polyherbal decoction) and kalka (fine paste of herbs) until the evaporation of aqueous phase transfers the contents into oily phase. The polyherbal decoction used in the preparation predominantly contains water soluble Active Botanical Ingredients (ABIs).
The production of natural biopolymers as flocculants for water treatment is highly desirable due to their inherent low toxicity and low environmental footprint. In this study, bio-flocculants were extracted from Hibiscus/Abelmoschus esculentus (okra) by using a water extraction method, and the extract yield and its performance in sludge dewatering were evaluated. Single factor experimental design was employed to obtain the optimum conditions for extraction temperature (25-90 °C), time (0.25-5 h), solvent loading (0.5-5 w/w) and agitation speed (0-225 rpm). Results showed that extraction yield was affected non-linearly by all experimental variables, whilst the sludge dewatering ability was only influenced by the temperature of the extraction process. The optimum extraction conditions were obtained at 70 °C, 2 h, solvent loading of 2.5 w/w and agitation at 200 rpm. Under the optimal conditions, the extract yield was 2.38%, which is comparable to the extraction of other polysaccharides (0.69-3.66%). The bio-flocculants displayed >98% removal of suspended solids and 68% water recovery during sludge dewatering, and were shown to be comparable with commercial polyacrylamide flocculants. This work shows that bio-flocculants could offer a feasible alternative to synthetic flocculants for water treatment and sludge dewatering applications, and can be extracted using only water as a solvent, minimising the environmental footprint of the extraction process.
The ultrasonic extraction (UE) method of anthocyanin from Clitoria ternatea flowers using response surface methodology (RSM) was performed in this study. By using RSM, the objective is to optimise the extraction yield of anthocyanin from C. ternatea which is influenced by various factors, including the extraction temperature, time, ratio of solvent to solid and ultrasonic power. The empirical model was investigated by performing first-level optimisation in a two-level factorial design with Design Expert 7 software. In comparison with the conventional solvent extraction, UE showed a 246.48% better extraction yield and produced an anthocyanin extract with a radical scavenging activity of 68.48% at the optimised factors of 50°C, 150 min, 15 mL/g and 240 W.