Displaying publications 61 - 80 of 766 in total

Abstract:
Sort:
  1. Ahmad Nazrun Shuid, Mohd Syukri Anwar, Ahmad Asmadi Yusof
    MyJurnal
    This study was carried out to compare the rate of burn wound healing with the applications of the latex of Carica papaya Linn. (papaya) or of silver sulfadiazine cream (SSD). Partial and full thickness burn wound (2 cm x 2 cm) was induced on the dorsal part of anaesthetized rats by using heated metal plates. The rats were divided into three groups, i.e. untreated group and groups treated daily with SSD and papaya latex, respectively. A digital camera was used to take photographs of the burn wounds daily to monitor their healing. It was found that there was no significant difference in the healing time of papaya latex treated group compared to the SSD treated group. Papaya latex contained digestive enzymes which might clean burn wounds but might also cause wound bleeding in a few rats of the papaya latex group.
    Matched MeSH terms: Metals
  2. Ikonomopoulou MP, Olszowy H, Hodge M, Bradley AJ
    PMID: 19247670 DOI: 10.1007/s00360-009-0347-3
    In this study on green turtles, Chelonia mydas, from Peninsular Malaysia, the effect of selected environmental toxicants was examined in vitro. Emphasis was placed on purported hormone-mimicking chemicals such as dichlorodiphenyltrichloroethane (DDT), dichlorodiphenyldichloroethylene, dieldrin, lead, zinc and copper. Five concentrations were used: high (1 mg/L), medium (10(-1) mg/L), low (10(-2) mg/L), very low (10(-6) mg/L) and control (diluted carrier solvent but no toxicants). The results suggest that environmental pesticides and heavy metals may significantly alter the binding of steroids [i.e. testosterone (T) and oestradiol] to the plasma proteins in vitro. Competition studies showed that only Cu competed for binding sites with testosterone in the plasma collected from nesting C. mydas. Dieldrin and all heavy metals competed with oestradiol for binding sites. Furthermore, testosterone binding affinity was affected at various DDT concentrations and was hypothesised that DDT in vivo may act to inhibit steroid-protein interactions in nesting C. mydas. Although the precise molecular mechanism is yet to be described, DDT could have an effect upon the protein conformation thus affecting T binding (e.g. the T binding site on the steroid hormone binding protein molecule).
    Matched MeSH terms: Metals, Heavy/toxicity*
  3. Jaffar Ali, Hamid Arshat, Khalid Hassan, Noor Laily Abu Bakar
    Malays J Reprod Health, 1983 Jan;1(1):60-8.
    PMID: 12279891
    Matched MeSH terms: Metals
  4. Vedamanikam VJ, Shazilli NA
    Bull Environ Contam Toxicol, 2008 Jan;80(1):63-7.
    PMID: 18058048
    A study was conducted on the long term effects of nine heavy metals on the Chironomus plumosus and Culicoides furens larvae. This study tested the effect of the heavy metals on several generations of the larvae to observe the formation of increased hardiness against pollutants present within the aquatic habitat. From this study it was observed that susceptibility or sensitivity to heavy metals decreased with LC50 values becoming larger indicating a decreased toxicity level. Significant variations (p < 0.05) were observed between first generation and third generation culicoides for all metals and at all concentrations. Variations between third and fourth generation culicoides were also significantly different (p < 0.05) with the exception of chromium at 25 degrees C and nickel and lead at every temperature range group. The variation between all generations 4, 5 and 6 was found to be insignificant (p > 0.05). This would indicate that metal tolerance would have occurred in these generations and the effect of metals was less toxic to the culicoides. Generation 9 was found to have LC50 values (p > 0.05) the same as the LC50 values obtained in third generation culicoides. Thus it would appear that heavy metal resistance was developed when the organisms were exposed to prolonged exposure of the heavy metals but was lost when the organisms were bred in non-contaminated water.
    Matched MeSH terms: Metals, Heavy/toxicity*
  5. Lim PE, Tay MG, Mak KY, Mohamed N
    Sci Total Environ, 2003 Jan 01;301(1-3):13-21.
    PMID: 12493181
    The objective of this study is to investigate the respective effects of Zn, Pb and Cd as well as the combined effect of Zn, Pb, Cd and Cu on the removal of nitrogen and oxygen demand in constructed wetlands. Four laboratory-scale gravel-filled subsurface-flow constructed wetland units planted with cattails (Typha latifolia) were operated outdoors and fed with primary-treated domestic wastewater at a constant flow rate of 25 ml/min. After 6 months, three of the wetland units were fed with the same type of wastewater spiked with Zn(II), Pb(II) and Cd(II), respectively, at 20, 5 and 1 mg/l for a further 9 months. The remaining unit was fed with the same type of wastewater spiked with a combination of Zn(II), Pb(II), Cd(II) and Cu(II) at concentrations of 10, 2.5, 0.5 and 5 mg/l, respectively, over the same period. The chemical oxygen demand (COD) and ammoniacal nitrogen (AN) concentrations were monitored at the inlet, outlet and three additional locations along the length of the wetland units to assess the performance of the wetland units at various metal loadings. At the end of the study, all cattail plants were harvested for the determination of total Kjeldahl nitrogen and metal concentrations. The results showed that the COD removal efficiency was practically independent of increasing metal loading or a combination of metal loadings during the duration of the study. In contrast, the AN removal efficiency deteriorated progressively with increasing metal loading. The relative effect of the heavy metals was found to increase in the order: Zn
    Matched MeSH terms: Metals, Heavy/adverse effects*
  6. Nur Azam Badarulzaman, Lee, Chung Heung, Ahmad Azmin Mohamad, Zainal Arifin Ahmad, Purwadaria, Sunara
    MyJurnal
    Ni–SiC composite coatings were electrodeposited from a Watts-type bath containing 5 g/l SiC particles in suspension. The particles were dispersed with the aid of mechanical agitation at 75 rpm and 150 rpm. EDX analysis confirmed the existence of Ni and SiC in the coatings. The effects of agitation speed on hardness properties of the coatings were investigated. SEM results showed that lower agitation speed could improve the amount of co-deposited SiC particles and increase the hardness of the composite coatings. The bonding between the Ni metal matrix and the SiC ceramic particles was compact.
    Matched MeSH terms: Metals
  7. Nik Rozlin Nik Masdek, Wan Muhammad Aniq Aiman, Mardziah Che Murad, Zuraidah Salleh, Koay Mei Hyie
    MyJurnal
    In the electrodeposition system, adding saccharin alters the properties of the metal deposits by changing the electrode kinetics of the deposited surface. In this study, nanocrystalline cobalt-iron (CoFe) coating was synthesised using the electrodeposition technique with different saccharin concentrations. The results obtained showed that the coating thickness increased while the grain size decreased from 51 nm to 40 nm when the saccharin concentration increased from 0 to 2 g/L. The nanocrystalline CoFe coating produced with 2 g/L of saccharin concentration resulted in the smallest particle size of 71.22 nm and the highest microhardness of 251.86 HV. From the salt spray test (24 and 48 hours) it was found that the use of saccharin at higher concentration of 2 g/L improves the corrosion resistance of the nanocrystalline CoFe coating significantly due to the change of surface morphology as well as the decrease in grain size.
    Matched MeSH terms: Metals
  8. Osman NA, Ujang FA, Roslan AM, Ibrahim MF, Hassan MA
    Sci Rep, 2020 04 20;10(1):6613.
    PMID: 32313095 DOI: 10.1038/s41598-020-62815-0
    Phytoremediation is one of the environmental-friendly and cost-effective systems for the treatment of wastewater, including industrial wastewater such as palm oil mill effluent final discharge (POME FD). However, the effects of the wastewater on the phytoremediator plants, in term of growth performance, lignocellulosic composition, and the presence of nutrients and heavy metals in the plants are not yet well studied. In the present work, we demonstrated that POME FD increased the growth of P. purpureum. The height increment of P. purpureum supplied with POME FD (treatment) was 61.72% as compared to those supplied with rain water (control) which was 14.42%. For lignocellulosic composition, the cellulose percentages were 38.77 ± 0.29% (treatment) and 34.16 ± 1.01% (control), and the difference was significant. These results indicated that POME FD could be a source of plant nutrients, which P. purpureum can absorb for growth. It was also found that the heavy metals (Al, As, Cd, Co, Cr, Ni and Pb) inside the plant were below the standard limit of the World Health Organization (WHO). Since POME FD was shown to have no adverse effects on P. purpureum, further research regarding the potential application of P. purpureum following phytoremediation of POME FD such as biofuel production is warranted to evaluate its potential use to fit into the waste-to-wealth agenda.
    Matched MeSH terms: Metals, Heavy
  9. Shukor MY, Baharom NA, Masdor NA, Abdullah MP, Shamaan NA, Jamal JA, et al.
    J Environ Biol, 2009 Jan;30(1):17-22.
    PMID: 20112858
    A new inhibitive heavy metals determination method using trypsin has been developed. The enzyme was assayed using the casein-Coomassie-dye-binding method. In the absence of inhibitors, casein was hydrolysed to completion and the Coomassie-dye was unable to stain the protein and the solution became brown. In the presence of metals, the hydrolysis of casein was inhibited and the solution remained blue. The bioassay was able to detect zinc and mercury with IC50 (concentration causing 50% inhibition) values of 5.78 and 16.38 mg l(-1) respectively. The limits of detection (LOD), for zinc and mercury were 0.06 mg l(-1) (0.05-0.07, 95% confidence interval) and 1.06 mg l(-1) (1.017-1.102, 95% confidence interval), respectively. The limits of quantitation (LOQ) for zinc and mercury were 0.61 mg l(-1) (0.51-0.74 at a 95% confidence interval) and 1.35 mg l(-1) (1.29-1.40 at a 95% confidence interval), respectively. The IC50 value for zinc was much higher than the IC50 values for papain and Rainbow trout, but was within the range of Daphnia magna and Microtox. The IC50 value for zinc was only lower than those for immobilized urease. Other toxic heavy metals, such as lead, silver arsenic, copper and cadmium, did not inhibit the enzyme at 20 mg l(-1). Using this assay we managed to detect elevated zinc concentrations in several environmental samples. Pesticides, such as carbaryl, flucythrinate, metolachlor glyphosate, diuron, diazinon, endosulfan sulphate, atrazine, coumaphos, imidacloprid, dicamba and paraquat, showed no effect on the activity of trypsin relative to control (One-way ANOVA, F(12,26)= 0.3527, p> 0.05). Of the 17 xenobiotics tested, only (sodium dodecyl sulphate) SDS gave positive interference with 150% activity higher than that of the control at 0.25% (v/v).
    Matched MeSH terms: Metals, Heavy/chemistry
  10. Assi MA, Hezmee MN, Haron AW, Sabri MY, Rajion MA
    Vet World, 2016 Jun;9(6):660-71.
    PMID: 27397992 DOI: 10.14202/vetworld.2016.660-671
    Lead, a chemical element in the carbon group with symbol Pb (from Latin: Plumbum, meaning "the liquid silver") and has an atomic number 82 in the periodic table. It was the first element that was characterized by its kind of toxicity. In animal systems, lead (Pb) has been incriminated in a wide spectrum of toxic effects and it is considered one of the persistent ubiquitous heavy metals. Being exposed to this metal could lead to the change of testicular functions in human beings as well as in the wildlife. The lead poising is a real threat to the public health, especially in the developing countries. Accordingly, great efforts on the part of the occupational and public health have been taken to curb the dangers of this metal. Hematopoietic, renal, reproductive, and central nervous system are among the parts of the human body and systems that are vulnerable toward the dangers following exposure to high level of Pb. In this review, we discussed the massive harmful impact that leads acetate toxicity has on the animals and the worrying fact that this harmful toxicant can be found quite easily in the environment and abundance. Highlighting its (Pb) effects on various organs in the biological systems, its economic, as well as scientific importance, with the view to educate the public/professionals who work in this area. In this study, we focus on the current studies and research related to lead toxicity in animals and also to a certain extent toward human as well.
    Matched MeSH terms: Metals, Heavy
  11. Said KS, Shuhaimi-Othman M, Ahmad AK
    Pak J Biol Sci, 2012 May 01;15(9):437-47.
    PMID: 24163953
    A study of water quality parameters (temperature, conductivity, total dissolved solid, dissolved oxygen, pH and water hardness) in Ampang Hilir Lake was conducted in January, April, July and October 2010. The water quality parameters were tested and recorded at different sampling stations chosen randomly using Hydrolab Data Sonde 4 and Surveyor 4 a water quality multi probe (USA). Six metals which were cadmium, chromium, lead, nickel, zinc and copper were determined in five different compartments of the lake namely water, total suspended solids, plankton, sediment and fish. The metals concentration were determined by Inductively Coupled Plasma Mass Spectrometer (ICP-MS), Perkin Elmer Elan, model 9000.The water quality parameters were compared with National Water Quality Standard (NWQS Malaysia) while metal concentrations were compared with Malaysian and international standards. The study shows that water quality parameters are of class 2. This condition is suitable for recreational activities where body contact is allowed and suitable for sensitive fishing activities. Furthermore, metal concentrations were found to be lower than the international standards, therefore toxic effects for these metals would be rarely observed and the adverse effects to aquatic organisms would not frequently occur.
    Matched MeSH terms: Metals, Heavy/analysis*
  12. Stephen Ambu, Stacey Foong Yee Yong, Yvonne Ai Lian Lim, Mak Joon Wah, Donald Koh Fook Chen, Soo Shen Ooi, et al.
    MyJurnal
    Background: The public health issue of consuming groundwater is a major concern because people often extract groundwater directly from the aquifers either through wells or boreholes without treating it with any form of filtration system or chlorine disinfection. Based on the Malaysian National Drinking Water guidelines the current study was designed to provide a better understanding on the variable factors that are influencing the quality of well-water in an urbanised village in Malaysia. Well water quality assessment of heavy metals, chemicals, microbial and physical parameters were carried out for Sungai Buloh Village in the Klang Valley to ensure it was safe for human consumption.

    Materials and Methods: Water samples were collected from wells at four sites (Sites A,B,C,D), a river and a tap inside a house in Sungai Buloh village. Soil was sampled from the riverbed and area surrounding the wells. Samples were collected every two months over a one year duration from all sites. The water samples were processed and examined for viruses, coliforms and protozoa as well as for heavy metal contaminants.

    Results: The turbidity and colour ranged in the average of 0.57-0.13 Nephelometric Turbidity (NTU) and 4.16-5.00 Total Conjunctive Use (TCU) respectively for all sites except Site C. At Site C the turbidity level was 2.56 ± 1.38 NTU. The well-water was polluted with coliforms (1.2 to 2.4 x 103 CFU/100 ml) in all sites, E. coli (0.12 - 4 x 102 CFU/100 ml CFU/ 100 ml) and Cryptosporidium oocysts (0.4 cysts/100 ml). All the heavy metals and chemical parameters were within the Malaysian Guidelines’ limits except manganese. The average pH ranged from 5.44 - 6.62 and the temperature was 28 ºC.

    Conclusion: In summary, the well water at Sungai Buloh is considered unsafe for consumption due to pollution. Therefore the major thrust will be to provide better quality of drinking water to the residents of the village.
    Matched MeSH terms: Metals, Heavy
  13. Krishnankutty N, Idris M, Hamzah FM, Manan Y
    Environ Sci Pollut Res Int, 2019 Aug;26(24):25046-25056.
    PMID: 31250391 DOI: 10.1007/s11356-019-05680-3
    Bauxite and iron ore mining is the major contributor to metal pollution in Tasik Chini, Malaysia. Deforestation of the protected zone of reserve forest exacerbates the problem. The current study is to understand the speciation of metals spatially in sediment to analyse the risk associated in terms of its mobility and bioavailability. The samples of sediment are collected from Sungai Jemberau, Laut Jemberau, and Laut Gumum of Tasik Chini. Four samplings were conducted for a year, by collecting the surface sediment. Sequential extraction method was followed for speciation of sediment and classified it into exchangeable, reducible, Fe-Mn oxides, organic and residual fractions. The results were also analyzed using principal component analysis (PCA) and cluster analysis (CA). The result reveals that Fe, Al, Mn, Zn, and Pb are the primary constituents of sediment contributing to about 98% of residual fraction. Co, Cd, Cr, As, and Ni are found in trace metal concentration and are identified to be mainly released from anthropogenic sources nearby. Although the individual proportion is less than major metals in exchangeable and carbonate fraction, they possess geochemically significant concentration above the permissible limit. More than 70-80% of all its total concentration proportion is hence found in mobile and bioavailable state. These possess toxic and have chronic effects to aquatic life and public health even in trace elemental concentration. Hence, these metals are the most toxic and bioavailable metals pausing risk for aquatic and public health. PCA analysis highlights that the enrichment of heavy metals in bioavailable fraction is mostly contributed from anthropogenic sources. The same results are emphasized by cluster analysis.
    Matched MeSH terms: Metals, Heavy/analysis*
  14. Sahabudin E, Kubo S, Yuzir MAM, Othman N, Nadia Md Akhir F, Suzuki K, et al.
    Bioengineered, 2024 Dec;15(1):2314888.
    PMID: 38375815 DOI: 10.1080/21655979.2024.2314888
    Cadmium (Cd) has become a severe issue in relatively low concentration and attracts expert attention due to its toxicity, accumulation, and biomagnification in living organisms. Cd does not have a biological role and causes serious health issues. Therefore, Cd pollutants should be reduced and removed from the environment. Microalgae have great potential for Cd absorption for waste treatment since they are more environmentally friendly than existing treatment methods and have strong metal sorption selectivity. This study evaluated the tolerance and ability of the microalga Tetratostichococcus sp. P1 to remove Cd ions under acidic conditions and reveal mechanisms based on transcriptomics analysis. The results showed that Tetratostichococcus sp. P1 had a high Cd tolerance that survived under the presence of Cd up to 100 µM, and IC50, the half-maximal inhibitory concentration value, was 57.0 μM, calculated from the change in growth rate based on the chlorophyll content. Long-term Cd exposure affected the algal morphology and photosynthetic pigments of the alga. Tetratostichococcus sp. P1 removed Cd with a maximum uptake of 1.55 mg g-1 dry weight. Transcriptomic analysis revealed the upregulation of the expression of genes related to metal binding, such as metallothionein. Group A, Group B transporters and glutathione, were also found upregulated. While the downregulation of the genes were related to photosynthesis, mitochondria electron transport, ABC-2 transporter, polysaccharide metabolic process, and cell division. This research is the first study on heavy metal bioremediation using Tetratostichococcus sp. P1 and provides a new potential microalga strain for heavy metal removal in wastewater.[Figure: see text]Abbreviations:BP: Biological process; bZIP: Basic Leucine Zipper; CC: Cellular component; ccc1: Ca (II)-sensitive cross complementary 1; Cd: Cadmium; CDF: Cation diffusion facilitator; Chl: Chlorophyll; CTR: Cu TRansporter families; DAGs: Directed acyclic graphs; DEGs: Differentially expressed genes; DVR: Divinyl chlorophyllide, an 8-vinyl-reductase; FPN: FerroportinN; FTIR: Fourier transform infrared; FTR: Fe TRansporter; GO: Gene Ontology; IC50: Growth half maximal inhibitory concentration; ICP: Inductively coupled plasma; MF: molecular function; NRAMPs: Natural resistance-associated aacrophage proteins; OD: Optical density; RPKM: Reads Per Kilobase of Exon Per Million Reads Mapped; VIT1: Vacuolar iron transporter 1 families; ZIPs: Zrt-, Irt-like proteins.
    Matched MeSH terms: Metals, Heavy*
  15. Dora Esphylin, Sharifah Norkhadijah Syed Ismail, Sarva Mangala Praveena, Zailina Hashim, Emilia Zainal Abidin
    MyJurnal
    Background: Prolonged exposure of heavy metals in the respirable particulate matter (PM10) from municipal solid waste (MSW) landfills may affect children health. Objective: To investigate the association of reported respiratory symptom with heavy metals in PM10, with heavy metals in fingernails among children residing close to MSW landfills. Methods: Two groups of children age 7 to 12 years old were involved in this cross-sectional study. Those residing within 3 km radius from a landfill were the exposed group and those residing more than 3 km radius as the unexposed group. Questionnaires adapted from American Thoracic Society were applied in the survey. Fingernails were used as biomarker. Ten heavy metals elements in PM and fingernail samples were analysed using inductively coupled plasma mass spectrometry (ICP-MS). Results: The cadmium, chromium, copper, manganese, nickel and lead concentrations in PM around the MSW landfills and residential areas exceeded the Canada and USEPA standard permissible limit. Heavy metals in fingernails (p
    Matched MeSH terms: Metals, Heavy
  16. Sabullah MK, Sulaiman MR, Abd Shukor MY, Syed MA, Shamaan NA, Khalid A, et al.
    ScientificWorldJournal, 2014;2014:571094.
    PMID: 25401148 DOI: 10.1155/2014/571094
    Crude extract of ChE from the liver of Puntius javanicus was purified using procainamide-sepharyl 6B. S-Butyrylthiocholine iodide (BTC) was selected as the specific synthetic substrate for this assay with the highest maximal velocity and lowest biomolecular constant at 53.49 µmole/min/mg and 0.23 mM, respectively, with catalytic efficiency ratio of 0.23. The optimum parameter was obtained at pH 7.5 and optimal temperature in the range of 25 to 30°C. The effect of different storage condition was assessed where ChE activity was significantly decreased after 9 days of storage at room temperature. However, ChE activity showed no significant difference when stored at 4.0, 0, and -25°C for 15 days. Screening of heavy metals shows that chromium, copper, and mercury strongly inhibited P. javanicus ChE by lowering the activity below 50%, while several pairwise combination of metal ions exhibited synergistic inhibiting effects on the enzyme which is greater than single exposure especially chromium, copper, and mercury. The results showed that P. javanicus ChE has the potential to be used as a biosensor for the detection of metal ions.
    Matched MeSH terms: Metals, Heavy/analysis*; Metals, Heavy/metabolism
  17. Ong MC, Yong JC, Shaari H, Joseph B, Shazili NAM, Pradit S, et al.
    Environ Geochem Health, 2023 Jun;45(6):3777-3787.
    PMID: 36574138 DOI: 10.1007/s10653-022-01456-w
    Brunei Bay is a unique ecosystem which offers a vast biodiversity. This study was carried out to define the source of metals in the surface sediment of Brunei Bay to ensure the bay's health. The secondary data were analysed using chemometrics analysis to verify the possible factors that influence metals distribution in Brunei Bay sediment. Samples were collected several times during 2013 to 2014 using Ponar grab at 16 stations within the bay. Samples were then dried, pre-treated, digested and analysed using Inductively Coupled Plasma Mass Spectrometry (ICPMS) in the laboratory. Overall, the mean concentration of metal, sediment pH and clay fraction were significantly changed during different sampling periods, as the changes were presumed affected by seasonal changes. The Pearson correlation has pointed that metals were dominantly derived by natural input; however, the total organic carbon was proven to be derived by anthropogenic sources. Moreover, the principal component analysis has verified that the distribution of metals in the bay's sediment was dominantly influenced by natural processes. However, the utilization and manipulation of marine resources are slightly affecting the bay's ecosystem which may deteriorate the ecosystem health soon.
    Matched MeSH terms: Metals/analysis
  18. Chong HL, Chia PS, Ahmad MN
    Bioresour Technol, 2013 Feb;130:181-6.
    PMID: 23306127 DOI: 10.1016/j.biortech.2012.11.136
    Oil palm shell, a waste from palm oil industry, was cleaned and utilized as adsorbent. Its particle size distribution gave the uniformity coefficient of approximately two indicating that it can be used as filter bed media for continuous operation without resting. Its measured pH(pzc) of 4.1 is below the common pH of constructed wetland water body suggesting positive adsorption for heavy metal. The effect of various parameters on its adsorption was studied via batch experiments. The adsorption of Cu(II) and Pb(II) ions by oil palm shell showed a slightly better fit with the Freundlich compared to Langmuir. Its monolayer adsorption capacities were found to be 1.756 and 3.390mg/g for Cu(II) and Pb(II), respectively. High correlation coefficient of over 0.99 given by the pseudo-second-order model suggests that the rate limiting factor may be chemisorption. These findings suggest its potential application as constructed wetland media for the removal of heavy metal.
    Matched MeSH terms: Metals, Heavy/isolation & purification*
  19. Haris H, Aris AZ, Mokhtar MB, Looi LJ
    Chemosphere, 2020 Apr;245:125590.
    PMID: 31874324 DOI: 10.1016/j.chemosphere.2019.125590
    This study was conducted to assess the reliability of Nerita lineata as a bioindicator for metals in sediment and the factors influencing the accumulation of metals and methylmercury in its soft tissue. The two matrices were analyzed for Co, Cr, Cu, THg, MeHg, Mn, Ni, Pb, and Zn. The metal concentrations in N. lineata were comparable to previously reported results with the exception of Ni which was higher. Cu, Mn, and Pb in N. lineata were significantly (p 
    Matched MeSH terms: Metals, Heavy/analysis*
  20. Ishadi NA, Rawi CS, Ahmad AH, Abdul NH
    Trop Life Sci Res, 2014 Dec;25(2):61-79.
    PMID: 27073600 MyJurnal
    The hemipteran (Insecta) diversity in the upper part of the Kerian River Basin was low with only 8 families and 16 genera recorded at 4 study sites from 3 rivers. Water bug composition varied among sampling sites (Kruskal-Wallis χ (2) = 0.00, p<0.05) but was not affected by wet-dry seasons (Z = 0.00, p>0.05). All recorded water parameters were weakly associated with generic abundance but the biochemical oxygen demand (BOD), chemical oxygen demand (COD), Water Quality Index (WQI) and heavy metals (zinc and manganese) showed relatively strong positive or negative relations with hemipteran diversity and richness (H' and R2). Within the ranges of measured water parameters, the WQI was negatively associated with hemipteran diversity and richness, implying the tolerance of the water bugs to the level of pollution encountered in the river basin. Based on its highest abundance and occurrence (ISI), Rhagovelia was the most important genus and along with Rheumatogonus and Paraplea, these genera were common at all study sites. In conclusion, habitat availability and suitability together with some environmental parameters influenced the abundance and composition of hemipterans in this river basin.
    Matched MeSH terms: Metals, Heavy
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links