MyMedR

Displaying publications 301 - 320 of 1243 in total

Abstract:

Sort:

Fulltext Salmonella-innovative targeting carrier: Loading with doxorubicin for cancer treatment

Rabea S, Alanazi FK, Ashour AE, Salem-Bekhit MM, Yassin AS, Moneib NA, et al.

Saudi Pharm J, 2020 Oct;28(10):1253-1262.
PMID: 33132719 DOI: 10.1016/j.jsps.2020.08.016

Cell- based targeted delivery is recently gain attention as a promising platform for delivery of anticancer drug in selective and efficient manner. As a new biotechnology platform, bacterial ghosts (BGs) have novel biomedical application as targeted drug delivery system (TDDS). In the current work, Salmonellas' BGs was utilized for the first time as hepatocellular cancer (HCC) in-vitro targeted delivery system. Successful BGs loading and accurate analysis of doxorubicin (DOX) were necessary steps for testing the applicability of DOX loaded BGs in targeting the liver cancer cells. Loading capacity was maximized to reach 27.5 µg/mg (27.5% encapsulation efficiency), by incubation of 10 mg BGs with 1 mg DOX at pH 9 in constant temperature (25 °C) for 10 min. In-vitro release study of DOX loaded BGs showed a sustained release (182 h) obeying Higuchi sustained kinetic release model. The death rate (tested by MTT assay) of HepG2 reached to 64.5% by using of 4 μg/ml, while it was about 51% using the same concentration of the free DOX (P value

Matched MeSH terms: Hydrogen-Ion Concentration
Geoaccumulation Index and Enrichment Factor of Arsenic in Surface Sediment of Bukit Merah Reservoir, Malaysia

Abdullah MIC, Sah ASRM, Haris H

Trop Life Sci Res, 2020 Oct;31(3):109-125.
PMID: 33214859 DOI: 10.21315/tlsr2020.31.3.8

An investigation study was conducted in Bukit Merah Reservoir (BMR) for the assessment of arsenic concentration in the surface sediment in 23 sampling stations. The sediment samples were digested and analysed for arsenic using Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES). Sediment parameters such as pH (4.42 ± 0.71), redox potential (121.77 ± 42.45 mV), conductivity (205.7 ± 64.07 μS cm-1) and organic matter (25.35 ± 9.34%) were also examined. The main objectives of this study are to determine the arsenic distribution and concentration and at the same time to assess the enrichment of arsenic using the geoaccumulation index (I
geo
) and enrichment factor (EF). This study shows the total arsenic concentration in the surface sediment of BMR is 4.302 ± 2.43 mg kg-1 and found to be below the threshold value of Canadian Interim Sediment Quality Guidelines (ISQG). High arsenic concentration is recorded near the southern part of the lake where anthropogenic activities are prevalent. Based on I
geo
, 13% of sampling stations are categorised as moderately polluted, 52.2% as unpolluted to moderately polluted and the rest is categorised as unpolluted. EF shows 78.3% stations are classified as extremely high enrichment and the rest as very high enrichment. This finding provides important information on the status of arsenic contamination in BMR and creating awareness concerning the conservation and management of the reservoir in the future.

Matched MeSH terms: Hydrogen-Ion Concentration
Fulltext Effects of open-top chamber on soil chemical properties and microbial growth

Kqueen, Cheah Yoke, Maryam Abdulla Seif, Mohamed Ikhtifar Rafi, Lim, Wei Meng, Ling, Clemente Michael Wong Vui, Tan, Geok Yuan Annie

Life Sciences, Medicine and Biomedicine, 2018;2(3):10-15.
MyJurnal

Global warming is the main concern in today’s century as it comes with numerous side effects to the natural environment. Open Top Chambers (OTC) consist of metal constructions with transparent vertical side-walls and a frustum on top. An opening in the middle of the frustum allows an air exchange to reduce temperature and humidity effects in the chamber. The size of the open top chamber which is located in Universiti Putra Malaysia is slanted 60o, 50cm tall, 2.08m basal diameter hexagon chamber. The Open Top Chamber experiments were carried out to determine how much global warming has affected and is still affecting the temperature, pH, the moisture and the growth of the microbes in the tropical soil. The aim of this study is to elucidate the effects of temperature increase on the soil microbes’ population and on the pH of the soil. The study was conducted to observe the effect of heat on the population of soil microbes and the pH of the soil which was collected on the same day for 6 consecutive months. The microbes from the samples were grown on agar plates. The population of microbes on the plates were used as values were for Colony Forming Unit (CFU) value calculations. The effects of OTCs on mean temperature showed a large range of CFU values throughout the 6 months but did not differ significantly between studies. Increases in mean monthly and diurnal temperature were strongly related, indicating that the presence of warming effect by the OTCs. Such predictive power allows a better mechanistic understanding of observed biotic response to experimental warming. This study will be useful for the understanding of the global warming effect on microbes. The Open Top Chamber experiment has proven to be one of the effective model for global warming research and data collected especially on the growth of soil microbial obtained would be of great use for further experiments.

Matched MeSH terms: Hydrogen-Ion Concentration
Fulltext Potentiality of Self-Cloned Lactobacillus plantarum Taj-Apis362 for Enhancing GABA Production in Yogurt under Glucose Induction: Optimization and Its Cardiovascular Effect on Spontaneous Hypertensive Rats

Hussin FS, Chay SY, Zarei M, Meor Hussin AS, Ibadullah WZW, Zaharuddin ND, et al.

Foods, 2020 Dec 09;9(12).
PMID: 33316941 DOI: 10.3390/foods9121826

The current study evaluated the γ-aminobutyric acid (GABA) producing ability from three novel strains of lactic acid bacteria (L. plantarum Taj-Apis362, assigned as UPMC90, UPMC91, and UPMC1065) co-cultured with starter culture in a yogurt. A combination of UPMC90 + UPMC91 with starter culture symbiotically revealed the most prominent GABA-producing effect. Response surface methodology revealed the optimized fermentation conditions at 39.0 °C, 7.25 h, and 11.5 mM glutamate substrate concentration to produce GABA-rich yogurt (29.96 mg/100 g) with desirable pH (3.93) and water-holding capacity (63.06%). At 2% glucose to replace pyridoxal-5-phosphate (PLP), a cofactor typically needed during GABA production, GABA content was further enhanced to 59.00 mg/100 g. In vivo study using this sample revealed a blood pressure-lowering efficacy at 0.1 mg/kg GABA dosage (equivalent to 30 mg/kg GABA-rich yogurt) in spontaneously hypertensive rats. An improved method to produce GABA-rich yogurt has been established, involving shorter fermentation time and lower glutamate concentration than previous work, along with glucose induction that omits the use of costly PLP, fostering the potential of developing a GABA-rich functional dairy product through natural fermentation with desirable product quality and antihypertensive property.

Matched MeSH terms: Hydrogen-Ion Concentration
Fulltext Isolation and Characterization of Magnetic Oil Palm Empty Fruits Bunch Cellulose Nanofiber Composite as a Bio-Sorbent for Cu(II) and Cr(VI) Removal

Khalid AM, Hossain MS, Ismail N, Khalil NA, Balakrishnan V, Zulkifli M, et al.

Polymers (Basel), 2020 Dec 30;13(1).
PMID: 33396583 DOI: 10.3390/polym13010112

In the present study, magnetic oil palm empty fruits bunch cellulose nanofiber (M-OPEFB-CNF) composite was isolated by sol-gel method using cellulose nanofiber (CNF) obtained from oil palm empty fruits bunch (OPEFB) and Fe3O4 as magnetite. Several analytical methods were utilized to characterize the mechanical, chemical, thermal, and morphological properties of the isolated CNF and M-OPEFB-CNF. Subsequently, the isolated M-OPEFB-CNF composite was utilized for the adsorption of Cr(VI) and Cu(II) from aqueous solution with varying parameters, such as pH, adsorbent doses, treatment time, and temperature. Results showed that the M-OPEFB-CNF as an effective bio-sorbent for the removal of Cu(II) and Cr(VI) from aqueous solution. The adsorption isotherm modeling revealed that the Freundlich equation better describes the adsorption of Cu(II) and Cr(VI) on M-OPEFB-CNF composite. The kinetics studies revealed the pseudo-second-order kinetics model was a better-described kinetics model for the removal of Cu(II) and Cr(VI) using M-OPEFB-CNF composite as bio-sorbent. The findings of the present study showed that the M-OPEFB-CNF composite has the potential to be utilized as a bio-sorbent for heavy metals removal.

Matched MeSH terms: Hydrogen-Ion Concentration
Fulltext In situ ophthalmic gel forming systems of poloxamer 407 and hydroxypropyl methyl cellulose mixtures for sustained ocular delivery of chloramphenicole: optimization study by factorial design

Kurniawansyah IS, Rusdiana T, Sopyan I, Ramoko H, Wahab HA, Subarnas A

Heliyon, 2020 Nov;6(11):e05365.
PMID: 33251348 DOI: 10.1016/j.heliyon.2020.e05365

Background: Conventional drug delivery systems have some major drawbacks such as low bioavailability, short residence time and rapid precorneal drainage. An in situ gel drug delivery system provides several benefits, such as prolonged pharmacological duration of action, simpler production techniques, and low cost of manufacturing. This research aims to get the optimum formula of chloramphenicol in situ gel based on the physical evaluation.
Methods: The effects of independent variables (poloxamer 407 and hydroxypropyl methyl cellulose (HPMC) concentration) on various dependent variables (gelling capacity, pH and viscosity) were investigated by using 32 factorial design and organoleptic evaluation was done with descriptive analysis.
Results: The optimized formula of chloramphenicol in situ gel yielded 9 variations of poloxamer 407 and HPMC bases composition in % w/v as follows, F1 (5; 0.45), F2 (7.5; 0.45), F3 (10; 0.45), F4 (5; 0.725), F5 (7.5; 0.725), F6 (10; 0.725), F7 (5; 1), F8 (7.5; 1), F9 (10; 1). The results indicated that the organoleptic, pH, and gelling capacity parameters matched all formulas (F1-F9), however, the viscosity parameter only matched F3, F6, F8, and F9. Based on factorial design, F6 had the best formula with desirability value of 0.54, but the design recommended that formula with the composition bases of poloxamer 407 and HPMC at the ratio of 8.16 % w/v and 0.77 % w/v, respectively, was the optimum formula with a desirability value of 0.69.
Conclusion: All formulas have met the Indonesian pharmacopoeia requirements based on the physical evaluation, especially formula 6 (F6), which was supported by the result of factorial design analysis.

Matched MeSH terms: Hydrogen-Ion Concentration
Fulltext Co-application of a biosolids product and biochar to two coarse-textured pasture soils influenced microbial N cycling genes and potential for N leaching

Shanmugam S, Jenkins SN, Mickan BS, Jaafar NM, Mathes F, Solaiman ZM, et al.

Sci Rep, 2021 01 13;11(1):955.
PMID: 33441591 DOI: 10.1038/s41598-020-78843-9

Co-application of biochar and biosolids to soil has potential to mitigate N leaching due to physical and chemical properties of biochar. Changes in N cycling pathways in soil induced by co-application of biological amendments could further mitigate N loss, but this is largely unexplored. The aim of this study was to determine whether co-application of a biochar and a modified biosolids product to three pasture soils differing in texture could alter the relative abundance of N cycling genes in soil sown with subterranean clover. The biosolids product contained lime and clay and increased subterranean clover shoot biomass in parallel with increases in soil pH and soil nitrate. Its co-application with biochar similarly increased plant growth and soil pH with a marked reduction in nitrate in two coarse textured soils but not in a clayey soil. While application of the biosolids product altered in silico predicted N cycling functional genes, there was no additional change when applied to soil in combination with biochar. This supports the conclusion that co-application of the biochar and biosolids product used here has potential to mitigate loss of N in coarse textured soils due to N adsoption by the biochar and independently of microbial N pathways.

Matched MeSH terms: Hydrogen-Ion Concentration
Fulltext Application of supercritical carbon dioxide (SC-CO2 ) on the microbial and physicochemical quality of fresh chicken meat stored at chilling temperature

Ismail Fitry Mohammad Rashedi, Safiullah Jauhar, Chong, ?Gun Hean, Nor Khaizura Mahmud @ Ab Rashid, Wan Zunairah Wan Ibadullah

International Food Research Journal, 2020;27(1):103-110.
MyJurnal

Supercritical carbon dioxide (SC-CO2 ) is a non-thermal technique implemented by food, pharmaceutical, and similar industries with the aim of inhibiting the microorganisms and apply effective sterilisation. Presently, limited number of studies has reported the application of SC-CO2 on fresh chicken meat. The present work therefore aimed to reveal the microbial and physicochemical quality of the SC-CO2 -treated fresh chicken meat. The fresh chicken meat was subjected to the SC-CO2 at 14 MPa and 45°C for 40 min and was stored at 4°C for 0, 3, and 7 days. The obtained results indicated that the treatment with SC-CO2 significantly decreased the total plate count and, yeast and mould count from log10 5.90 to 2.00 CFU/g and from log10 5.02 to 2.00 CFU/g at day 7 of storage, respectively. The values of pH, cooking loss, and water holding capacity were not affected by the treatment. The results revealed that the SC-CO2 -treated samples displayed harder texture, higher lightness and yellowness, and lower redness. In addition, lipid peroxidation of SC-CO2 and control samples resulted in values of 1.9 and 0.5 MDA/mg of meat at day 7 of storage time and did not significantly change in the rest of the evaluation days. In summary, the application of SC-CO2 was capable of enhancing the microbial quality and certain physicochemical attributes. However, alteration of certain parameters of SC-CO2 might enhance the overall meat quality.

Matched MeSH terms: Hydrogen-Ion Concentration
Surfactant-functionalised magnetic ferum oxide coupled with high performance liquid chromatography for the extraction of phenol

Beh SY, Md Saleh N, Asman S

Anal Methods, 2021 02 07;13(5):607-619.
PMID: 33480366 DOI: 10.1039/d0ay02166k

The usage of phenols in the marketplace has been increasing tremendously, which has raised concerns about their toxicity and potential effect as emerging pollutants. Phenol's structure has closely bonded phenyl and hydroxy groups, thereby making its functional characteristics closely similar to that of alcohol. As a result, phenol is used as a base compound for commercial home-based products. Hence, a simple and efficient procedure is required to determine the low concentration of phenols in environmental water samples. In this research, a method of combining magnetic nanoparticles (MNPs) with surfactant Sylgard 309 was developed to overcome the drawbacks in the classical extraction methods. In addition, this developed method improved the performance of extraction when MNPs and the surfactant Sylgard 309 were used separately, as reported in the previous research. This MNP-Sylgard 309 was synthesised by the coprecipitation method and attracts phenolic compounds in environmental water samples. Response surface methodology was used to study the parameters and responses in order to obtain an optimised condition using MNP-Sylgard 309. The parameters included the effect of pH, extraction time, and concentration of the analyte. Meanwhile, the responses measured were the peak area of the chromatogram and the percentage recovery. From this study, the results of the optimum conditions for extraction using MNP-Sylgard 309 were pH 7, extraction time of 20 min, and analyte concentration of 10.0 μg mL-1. Under the optimized conditions, MNP-Sylgard 309 showed a low limit of detection of 0.665 μg mL-1 and the limit of quantification was about 2.219 μg mL-1. MNP-Sylgard 309 was successfully applied on environmental water samples such as lake and river water. High recovery (76.23%-110.23%) was obtained.

Matched MeSH terms: Hydrogen-Ion Concentration
Fulltext Quality attributes of fresh pineapple-mango juice blend during storage

Rosnah Shamsudin, Zulkifli, N. A., ?Amanina Amani Kamarul Zaman?

International Food Research Journal, 2020;27(1):141-149.
MyJurnal

Blending or mixing two or more of fruit juices is able to improve the quality of juices as
compared to single flavour. Pineapple and mango are among the popular tropical fruits in
Malaysia. Despite the massive production of pineapple in Malaysia, utilisation of pineapple as
a juice remains unpopular due to its exotic and strong flavour. Blending of pineapple with
mango is believed to overcome this issue. Nevertheless, suitable blending ratios play important role in the end product quality. The present work aims to determine the physicochemical
and nutritional quality of fresh blended pineapple-mango juice at different blending ratios for
25 days of refrigerated storage (4 ± 2°C). Physicochemical (colour, pH, titratable acidity, and
total soluble solid) and nutritional (vitamin C, total phenolic content, and total antioxidant
content) properties of fresh pineapple-mango juice blends of ratio 80% pineapple with 20%
mango (R80:20) and 50% pineapple with 50% mango (50:50) were determined throughout 25
days of storage. Pineapple-mango juice blends at blending ratio of R80:20 exhibited better
qualities in term of colour (lightness, chroma, hue, and browning index), chemical composition, and nutritional content.

Matched MeSH terms: Hydrogen-Ion Concentration
Effects of aminoacids on the autooxidation of 3,5-di-tert-butylcatechol in the presence of surface-active copper(II) complexes

Lim YY, Liew LP

J Colloid Interface Sci, 2002 Nov 15;255(2):425-7.
PMID: 12505092

The rate of autooxidation of 3,5-di-tert-butylcatechol (3,5-DTBC) in the presence of micelles formed from mixing equal concentrations of [Cu(C(12)-tmed)Br(2)] (where C(12)-tmed is N,N,N'-trimethyl-N'-dodecylethylenediamine) and several amino acids has been investigated. It was found that the rate in air-saturated solution is very much dependent on pH, which affects the availability of copper(II) coordination site for the catechol and the degree of micellization. At a given pH, the rates in [Cu(C(12)-tmed)Br(2)] micellar media are greatly enhanced in the presence sodium halide.

Matched MeSH terms: Hydrogen-Ion Concentration
Fulltext Renal tubular acidosis in Kelantan, Malaysia--a case review

Zainal D

Singapore Med J, 1994 Jun;35(3):303-5.
PMID: 7997910

Renal tubular acidosis (RTA) is a defect in urinary acidification in the absence of renal failure. All records of patients admitted to adult medical wards at the University Hospital USM (HUSM), Kelantan between 1986 to 1990 with the diagnosis of renal tubular acidosis were reviewed. Sixteen (16) patients were identified and fulfilled the diagnostic criteria. Their mean age at presentation was 28.9 +/- 0.74 years. The triad of muscle weakness, hypokalaemia and systemic metabolic acidosis were the characteristic features at presentation. Normal serum alkaline phosphatase and skeletal X-rays were noted. Their prognosis were generally good. Their mean serum bicarbonate and potassium on follow up were 17.84 +/- 0.35 and 3.82 +/- 0.05 mmol/L respectively. The importance of regular follow-up and long-term management is emphasised.

Matched MeSH terms: Hydrogen-Ion Concentration
Effect of interactions on the nutrient status of a tropical soil treated with green manures and inorganic phosphate fertilizers

Bah AR, Rahman ZA, Hussin A

ScientificWorldJournal, 2004 Jun 08;4:393-414.
PMID: 15252691

Integrated nutrient management systems using plant residues and inorganic P fertilizers have high potential for increasing crop production and ensuring sustainability in the tropics, but their adoption requires in-depth understanding of nutrient dynamics in such systems. This was examined in a highly weathered tropical soil treated with green manures (GMs) and P fertilizers in two experiments conducted in the laboratory and glasshouse. The treatments were factorial combinations of the GMs (Calopogonium caeruleum, Gliricidia sepium, and Imperata cylindrica) and P fertilizers (phosphate rocks [PRs] from North Carolina, China, and Algeria, and triple superphosphate) replicated thrice. Olsen P, mineral N, pH, and exchangeable K, Ca, and Mg were monitored in a laboratory incubation study for 16 months. The change in soil P fractions and available P was also determined at the end of the study. Phosphorus available from the amendments was quantified at monthly intervals for 5 months by 33P-32P double isotopic labeling in the glasshouse using Setaria sphacelata as test crop. The GMs were labeled with 33P to determine their contribution to P taken up by Setaria, while that from the P fertilizers was indirectly measured by labeling the soil with 32P. The P fertilizers hardly changed Olsen P and exchangeable cations during 16 months of incubation. The legume GMs and legume GM+P did not change Olsen P, lowered exchangeable Ca, and increased exchangeable K about threefold (4.5 cmol[+]kg(-1) soil) in the first 4 months, even as large amounts of NH4-N accumulated (approximately 1000 mg kg soil(-1)) and soil pH increased to more than 6.5. Afterwards, Olsen P and exchangeable Ca and Mg increased (threefold) as NH4+-N and soil pH declined. The legume GMs also augmented reversibly sorbed P in Al-P and Fe-P fractions resulting in high residual effect in the soil, while fertilizer-P was irreversibly retained. The GMs increased PR-P utilization by 40 to over 80%, mobilized soil P, and markedly enhanced uptake of N, K, Ca, and Mg. Thus GMs+PRs is an appropriate combination for correcting nutrient deficiencies in tropical soils.

Matched MeSH terms: Hydrogen-Ion Concentration
Effects of buffer properties on cyclodextrin glucanotransferase reactions and cyclodextrin production from raw sago (Cycas revoluta) starch

Kamaruddin K, Illias RM, Aziz SA, Said M, Hassan O

Biotechnol Appl Biochem, 2005 Apr;41(Pt 2):117-25.
PMID: 15202937

Results from the present study have shown that the ionic species of buffers, pH values and reaction temperature can affect the enzyme unit activities and product specificity of Toruzyme (Novo Nordisk A/S Bagsvaerd, Denmark) CGTase (cyclodextrin glucanotransferase). Applying a similar reaction environment (acetate buffer, pH 6.0; temperature, 60 degrees C), the CGTase was found to be capable of producing pre dominantly beta-cyclodextrin from either raw or gelatinized sago (Cycas revoluta) starch. Changing the buffer from acetate to phosphate reduced the yield of beta-cyclodextrin from 2.48 to 1.42 mg/ml and also affected the product specificity, where production of both alpha- and beta-cyclodextrins were more pronounced. The decrease in the production of cyclodextrins in phosphate buffer was significant at both pH 6.0 and 7.0. However, changing the buffer to Tris/HCl (pH 7.0) showed a significant increase in beta-cyclodextrin production. Increasing the ionic strength of sodium acetate and Tris/HCl buffers at pH 6.0 and 7.0 to equivalent ionic strength of phosphate buffers showed no significant effects on cyclodextrin production. Higher yield of cyclodextrins at pH 7.0 when Tris/HCl was used might be due to the binding of chloride ions at the calcium-binding sites of the CGTase, resulting in the shift of the optimum pH close to physiological environment, leading to an increase in the activities and specificity.

Matched MeSH terms: Hydrogen-Ion Concentration
Effects of adding organic materials to an acid sulfate soil on the growth of cocoa (Theobroma cacao L.) seedlings

Shamshuddin J, Muhrizal S, Fauziah I, Husni MH

Sci Total Environ, 2004 May 5;323(1-3):33-45.
PMID: 15081715

Acid sulfate soils having a pH of less than 3.5 are widespread in Malaysia. Some of these soils are planted to cocoa, but the yield is reported to be low due to soil infertility related to Al toxicity. Cocoa growth is sensitive to the presence of Al in the soil. To a certain extent, Al toxicity in soils can be reduced by organic matter application and to a greater extent in iron-poor acid sulfate soil. A study was conducted to determine the efficacy of various types of organic materials easily available in the country to ameliorate acid sulfate soil infertility for growing cocoa seedlings. The treatments were control (nil), lime (3 t/ha), peat (10% w/w), peat plus green manure (10% w/w), peat plus rice straw (10% w/w), peat plus chicken dung (10% w/w) and peat plus POMS (Palm oil mill sludge) (10% w/w). The growth of cocoa seedlings was affected significantly by the presence of Al in the cocoa tissues. As the amount of Al in the leaves increased, the relative top dry weight of cocoa seedlings decreased. Likewise, the relative plant height was negatively correlated with Al in the leaves. Peat as well as peat in combination with green manure, rice straw, chicken dung or palm oil mill sludge was able to reduce Al toxicity in acid sulfate soil; the highest top dry weight of cocoa seedlings were obtained in the peat plus green manure treatment. The best cocoa seedlings root growth was found for the peat treatment alone. The relative top dry weight of cocoa seedlings was negatively correlated with Al(3+) as well as Al(3+)+Al(OH)(2+)+Al(OH)(2)(+) activity in the soil solution. The critical values for Al(3+) and the combination of Al(3+)+Al(OH)(2+)+Al(OH)(2)(+) activity in the soil solution were 10 microM and 15 microM, respectively.

Matched MeSH terms: Hydrogen-Ion Concentration
Evaluation of fungal potentiality for bioconversion of domestic wastewater sludge

Alam MZ, Fakhru'l-Razi A, Molla AH

J Environ Sci (China), 2004;16(1):132-7.
PMID: 14971468

This study was undertaken to screen the filamentous fungi isolated from its relevant habitats(wastewater, sewage sludge and sludge cake) for the bioconversion of domestic wastewater sludge. A total of 35 fungal strains were tested against wastewater sludge (total suspended solids, TSS 1%-5% w/w) to evaluate its potentiality for enhancing the biodegradability and dewaterability using liquid state bioconversion(LSB) process. The strains were divided into five groups i.e. Penicillium, Aspergillus, Trichoderma, Basidiomycete and Miscellaneous, respectively. The strains WWZP1003, SCahmA103, SCahmT105 and PC-9 among their respective groups of Penicillium, Aspergillus, Trichoderma and Basidiomycete played potential roles in terms of separation (formation of pellets/flocs/filaments), biodegradation(removal of COD) and filtration (filterability) of treated domestic wastewater sludge. The Miscellaneous group was not considered due to its unsatisfactory results as compared to the other groups. The pH value was also influenced by the microbial treatment during fermentation process. The filterability of treated sludge was improved by fungal treatment, and lowest filtration time was recorded for the strain WWZP1003 and SCahmA103 of Penicillium and Aspergillus groups respectively compared with other strains.

Matched MeSH terms: Hydrogen-Ion Concentration
Fulltext Effects of dietary postbiotic and inulin on growth performance, IGF1 and GHR mRNA expression, faecal microbiota and volatile fatty acids in broilers

Kareem KY, Loh TC, Foo HL, Akit H, Samsudin AA

BMC Vet Res, 2016;12(1):163.
PMID: 27496016 DOI: 10.1186/s12917-016-0790-9

Postbiotics (metabolic products by lactic acid bacteria) and prebiotics have been established as substitute to antibiotics in order to enhance immunity and growth performance in broiler chickens. Nonetheless, insufficient information is available on the effects of postbiotics and prebiotics combination on growth performance, faecal microbiota, pH and volatile fatty acids (VFA), as well as liver insulin like growth factor 1 (IGF1) and growth hormone receptor (GHR) mRNA expressions in broiler chickens. The aim of this experiment was to evaluate the effects of different types of postbiotics with different levels of prebiotic (inulin) on broiler for those parameters.

Matched MeSH terms: Hydrogen-Ion Concentration
Fulltext Immobilization of α-Amylase from Anoxybacillus sp. SK3-4 on ReliZyme and Immobead Supports

Kahar UM, Sani MH, Chan KG, Goh KM

Molecules, 2016 Sep 09;21(9).
PMID: 27618002 DOI: 10.3390/molecules21091196

α-Amylase from Anoxybacillus sp. SK3-4 (ASKA) is a thermostable enzyme that produces a high level of maltose from starches. A truncated ASKA (TASKA) variant with improved expression and purification efficiency was characterized in an earlier study. In this work, TASKA was purified and immobilized through covalent attachment on three epoxide (ReliZyme EP403/M, Immobead IB-150P, and Immobead IB-150A) and an amino-epoxide (ReliZyme HFA403/M) activated supports. Several parameters affecting immobilization were analyzed, including the pH, temperature, and quantity (mg) of enzyme added per gram of support. The influence of the carrier surface properties, pore sizes, and lengths of spacer arms (functional groups) on biocatalyst performances were studied. Free and immobilized TASKAs were stable at pH 6.0-9.0 and active at pH 8.0. The enzyme showed optimal activity and considerable stability at 60 °C. Immobilized TASKA retained 50% of its initial activity after 5-12 cycles of reuse. Upon degradation of starches and amylose, only immobilized TASKA on ReliZyme HFA403/M has comparable hydrolytic ability with the free enzyme. To the best of our knowledge, this is the first report of an immobilization study of an α-amylase from Anoxybacillus spp. and the first report of α-amylase immobilization using ReliZyme and Immobeads as supports.

Matched MeSH terms: Hydrogen-Ion Concentration
Investigation of distribution of radioactivity with effects of heavy metals in toothpastes from Penang markets

Salih NF, Jafri ZM, Jaafar MS

Environ Sci Pollut Res Int, 2016 Dec;23(23):23662-23674.
PMID: 27619370

This study was carried out to determine the concentration of (222)Rn, (226)Ra, and (238)U in 25 different toothpastes available in the local market in Penang, Malaysia, using a CR-39 detector. The results showed the maximum concentration of radon/ radium/uranium to be 4197.644 Bq.m(-3), 54.369 Bq.Kgm(-1), and 0.044 ppm in Colgate4; the annual effective dose was found (0.402 mSvy(-1)) in S07. The average concentration of radon (42 %, 3.224 KBq.m(-3)) was higher than the concentration of (214)Po, (218)Po in POS (32 %, 2.415 KBq.m(-3)) and POW (26 %, 1.979 KBq.m(-3)). Also the values of pH of samples ranged from 4.21 (highly acidic) in S04 to 9.97 (highly basic) in S07, with an average of 6.33 which tended towards an acidic behavior; a low or high pH for a long period of time can cause harmful side-effects and enamel erosion. Concentrations of heavy metals varied from the maximum value 56.156 ppm in the Ca elements in the Colgate 4 sample to a minimum value of -0.858 ppm in the Cd elements in Colgate 6 (Ca 56.156 ppm > Cd 51.572 ppm > Zn 41.039 ppm > Mg 11.682 ppm > Pb 11.009 ppm]. Monitoring the accumulation of these metals in toothpaste samples is very important: the average annual effective dose (0.3118 mSvy(-1)) was below the range (3-10 mSvy(-1)) reported by ICRP (1993), and therefore there is no evidence of health problems. Significant strong positive correlations were found (r = 1, Pearson correlation, p

Matched MeSH terms: Hydrogen-Ion Concentration
Controlled acid catalyzed sol gel for the synthesis of highly active TiO2-chitosan nanocomposite and its corresponding photocatalytic activity

Afzal S, Samsudin EM, Julkapli NM, Hamid SB

Environ Sci Pollut Res Int, 2016 Nov;23(22):23158-23168.
PMID: 27591888

For the synthesis of a highly active TiO2-chitosan nanocomposite, pH plays a crucial role towards controlling its morphology, size, crystallinity, thermal stability, and surface adsorption properties. The presence of chitosan (CS) biopolymer facilitates greater sustainability to the photoexcited electrons and holes on the catalysts' surface. The variation of synthesis pH from 2 to 5 resulted in different physico-chemical and photocatalytic properties, whereby a pH of 3 resulted in TiO2-chitosan nanocomposite with the highest photocatalytic degradation (above 99 %) of methylene orange (MO) dye. This was attributed to the efficient surface absorption properties, high crystallinity, and the presence of reactive surfaces of -NH2 and -OH groups, which enhances the adsorption-photodegradation effect. The larger surface oxygen vacancies coupled with reduced electron-hole recombination further enhanced the photocatalytic activity. It is undeniable that the pH during synthesis is critical towards the development of the properties of the TiO2-chitosan nanocomposite for the enhancement of photocatalytic activity.

Matched MeSH terms: Hydrogen-Ion Concentration

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links