MyMedR

Displaying publications 401 - 420 of 428 in total

Abstract:

Sort:

Catalytic performance of Cu/ZnO/Al2O3/ZrO2 for slurry methanol synthesis from CO2 Hydrogenation: Effect of Cu/Zn Molar Ratio

Salina Shaharun, Maizatul S. Shaharun, Mohamad F.M. Shah, Nurul A. Amer

Sains Malaysiana, 2018;47:207-214.

Catalytic hydrogenation of carbon dioxide (CO2) to methanol is an attractive way to recycle and utilize CO2. A series of Cu/ZnO/Al2O3/ZrO2 catalysts (CZAZ) containing different molar ratios of Cu/Zn were prepared by the co-precipitation method. The catalysts were characterized by temperature-programmed reduction (TPR), field emission scanning electron microscopy-energy dispersive x-ray analysis (FESEM-EDX) and X-ray diffraction (XRD). Higher surface area, SABET values (42.6-59.9 m2/g) were recorded at low (1) and high (5) Cu/Zn ratios with the minimum value of 35.71 m2/g was found for a Cu/Zn of 3. The reducibility of the metal oxides formed after calcination of catalyst samples was also affected due to change in metal-support interaction. At a reaction temperature of 443 K, total gas pressure of 3.0 MPa and 0.1 g/mL of the CZAZ catalyst, the selectivity to methanol decreased as the Cu/Zn molar ratio increased, and the maximum selectivity of 93.9 was achieved at Cu/Zn molar ratio of 0.33. With a reaction time of 3h, the best performing catalyst was CZAZ75 with Cu/Zn molar ratio of 5 giving methanol yield of 6.4%.

Matched MeSH terms: Aluminum Oxide
Mechanical and microstructural properties of high calcium fly ash one-part geopolymer cement made with granular activator

Mohammed BS, Haruna S, Wahab MMA, Liew MS, Haruna A

Heliyon, 2019 Sep;5(9):e02255.
PMID: 31687531 DOI: 10.1016/j.heliyon.2019.e02255

In this present experimental study, geopolymer cement is developed using high calcium fly ash and used in the production of one-part alkali-activated binders. At 8-16 percent of the total precursor materials, the HCFA was activated with anhydrous sodium metasilicate powder and cured in ambient condition. Five mixtures of one-part geopolymer paste were intended at a steady w/b proportion. Density, flowability, setting time, compressive strength, splitting tensile strength and molar ratio impact were envisaged. It was observed that the setting time of the designed one-part geopolymer paste decreases with higher activator content. The experimental findings showed that the resistance of one-part geopolymer cement paste increases with comparatively greater activator content. However, raising the granular activator beyond 12 percent by fly ash weight decreases the strength and workability of the established one-part geopolymer cement. The optimum mix by weight of the fly ash was discovered to be 12 percent (i.e. 6 percent Na2O). At 28 days of curing, one-part alkali-activated paste recorded the greatest compressive strength of almost 50 MPa. The density of the one-part geopolymer paste is nearly the same regardless of the mixes. Microstructural assessment by FESEM, FTIR and XRD has shown that the established geopolymer paste includes quartz, pyrrhotite, aluminosilicate sodium and hydrate gels of calcium aluminosilicate. Based on the experimental information acquired, it can be deduced that the strength growth of one-part geopolymer cement is similar to that of Portland cement.

Matched MeSH terms: Aluminum Silicates
Fulltext An inhibited dopamine synthesizing cell model of AADC deficiency

Melati Khalid, Mohamad Aris Mohd Moklas

Life Sciences, Medicine and Biomedicine, 2019;3(2):1-7.
MyJurnal

Aromatic L-amino acid decarboxylase deficiency (AADC) is a rare autosomal recessive pediatric neurotransmitter disease. To date it remains poorly understood mainly due to an absence of a disease model. The dopaminergic neuroblastoma cell SH-SY5Y was chosen to develop our AADC deficiency model. These cells are not native dopamine synthesizers. Objective: To develop a dopamine-producing cellular model of AADC deficiency using SH-SY5Y neuroblastoma cells. Methods: Dopamine pathway proteins were identified with Western Blotting. Dopaminergic differentiation was attempted using all-trans retinoic acid (ATRA) with dopamine detection via HPLC-ECD post alumina extraction. Treatment with L-DOPA provided SH-SY5Y with excess precursor. RT-PCR was used to determine the expression of markers of mature neurons. Results: Western Blot screening identified AADC, dopamine β-hydroxylase and tyrosine hyrdoxylase proteins, indicative of a dopaminergic pathway. ATRA was unsuccessful in producing dopamine from the cells. L-DOPA treatment however, generated dopamine first visible as a HPLC-ECD peak 30 minutes post-incubation. Prior to this, SH-SY5Y dopamine synthesis from L-DOPA has never been documented. This de novo synthesis is then inhibited using benserazide to form our AADC deficiency cell model. RT-PCR showed that SH-SY5Y cells express markers of mature neurons in its ‘native’ state and is not affected by L-DOPA and benserazide treatment. This cell model will potentially benefit many areas of AADC deficiency research. Conclusion: SH-SY5Y cells produced HPLC-ECD measureable amounts of dopamine with the addition of L-DOPA. Our model of AADC deficiency is generated by quelling the dopamine production with Benserazide.

Matched MeSH terms: Aluminum Oxide
The effect of morphine on the biosynthesis of catecholamines in the rat brain

Malini M, Kwan TK, Perumal R

Biochem. Mol. Biol. Int., 1994 Feb;32(2):279-90.
PMID: 8019433

In vivo studies involved monitoring the effect of morphine administration on catecholamine biosynthesis by the brain while in vitro studies involved studying the effect of morphine on the uptake of tritiated tyrosine by synaptosomes and its subsequent incorporation into the catecholamines. The extremely low levels of these endogenous compounds required the use of High Performance Liquid Chromatography with electrochemical detection. Intra-peritoneal injection of morphine at a dosage of 10 mg/kg did not produce appreciable changes in the catecholamine levels but a dosage of 30 mg/kg morphine was found to elevate dihydroxy phenylacetic acid content. At a dosage of 60 mg/kg, dopamine levels were elevated while noradrenaline was depleted. Morphine, at a concentration of 1 x 10(-5)M increases the incorporation of tritiated tyrosine into dopamine and dihydroxy phenylacetic acid in synaptosomal preparations.

Matched MeSH terms: Aluminum Oxide
Fulltext A comparative analysis of microleakage of three root end filling materials - an in vitro study

Saini, D., Nadig, G., Saini, R.

Archives of Orofacial Sciences, 2008;3(2):43-47.
MyJurnal

The main objective of a root end filling material is to provide an apical seal that prevents the movement of bacteria and the diffusion of bacterial products from the root canal system into periapical tissues. The aim of this study was to compare the microleakage of three root end filling materials Mineral trioxide aggregate (MTA), Glass ionomer cement (GIC) and Silver GIC (Miracle Mix) using dye penetration technique under stereomicroscope. Forty-five extracted human maxillary central incisors were instrumented and obturated with gutta percha using lateral compaction technique. Following this, the teeth were stored in saline. After one week, teeth were apically resected at an angle of 90ï° to the long axis of the root and root end cavities were prepared. The teeth were divided into three groups of fifteen specimens each and were filled with Group I -MTA, Group II - GIC and Group III - Miracle Mix. The samples were coated with varnish and after drying, they were immersed in 1% methylene blue dye for 72 hours. The teeth were then rinsed, sectioned longitudinally and observed under stereomicroscope. The depth of dye penetration was measured in millimeters. Microleakage was found to be significantly less in MTA (0.83 mm) when compared to GIC (1.32 mm) (p < 0.001) and with Miracle Mix (1.39 mm) (p < 0.001) No significant difference was found when microleakage in Miracle Mix was compared to that of GIC (p = 0.752). Thus we concluded that MTA is a better material as root end filling material to prevent microleakage, in comparison to GIC and Miracle Mix.

Matched MeSH terms: Aluminum Compounds
Fulltext Enhancers of Agrobacterium-mediated transformation of Tibouchina semidecandra selected on the basis of GFP expression

Thau, Wilson Lym Yon, Henry, Erle Stanley, Janna Ong Abdullah

Trop Life Sci Res, 2010;21(2):-.
MyJurnal

Genetic engineering is a powerful tool for the improvement of plant traits. Despite reported successes in the plant kingdom, this technology has barely scratched the surface of the Melastomataceae family. Limited studies have led to some optimisation of parameters known to affect the transformation efficiency of these plants. The major finding of this study was to optimise the presence of selected enhancers [e.g., monosaccharides (D-glucose, D-galactose and D-fructose), tyrosine, aluminium chloride (AICI3) and ascorbic
acid] to improve the transformation efficiency of Tibouchina semidecandra. Agrobacterium tumefaciens strain LBA4404 harbouring the disarmed plasmid pCAMBIA1304 was used to transform shoots and nodes of T. semidecandra. Different concentrations of the transformation enhancers were tested by using green fluorescent protein (GFP) as a reporter. The results obtained were based on the percentage of GFP expression, which was observed 14 days post-transformation. A combination of 120 µM galactose and 100
µM tyrosine supplemented with 600 µM AICI3 in the presence of 15 mg/l ascorbic acid gave the highest percentage of positive transformants for T. semidecandra shoots. Whereas 60 µM galactose and 50 µM tyrosine with 200 µM AICI3 in the presence of 15 mg/l ascorbic acid was optimum for T. semidecandra nodes. The presence of the hygromycin phosphotransferase II (hptII) transgene in the genomic DNA of putative
T. semidecandra transformants was verified by PCR amplification with specific primers.

Matched MeSH terms: Aluminum Compounds
Fulltext Modification of natural feldspar as support for enzyme immobilization

Mohd Basyaruddin Abdul Rahman, Uswatun Hasanah Zaidan, Mahiran Basri, Siti Salhah Othman, Raja Noor Zaliha Raja Abdul Rahman, Abu Bakar Salleh

Journal of Nuclear and Related Technologies, 2009;2009(1):25-42.
MyJurnal

The land area of Tanah Putih, Gua Musang, Kelantan (Malaysia) is well-known for its wealth in industrial mineral resources, especially aluminosilicate of feldspar and mica. Natural feldspar and mica were physicochemically characterized with regard to X-ray diffraction (XRD), nitrogen sorption analysis and transmission electron microscopy (TEM) techniques for qualitative and quantitative identification of feldspar and mica. They show a good crystallinity, high surface area and uniformity of mesoporous structures. For the purpose of this experiment, the aluminosilicate of feldspar was modified either by acid treatment, or grafting the silanol groups present with various functional groups including aminopropyl-, octyl-, vinyl-, mercapto- and glycidoxy-triethoxysilanes, or activation of pre-treated support with glutaraldehyde. These support derivatives were used for further utilization in the immobilization of lipase from Candida rugosa and resulted in various interaction mechanisms between enzyme and introduced supports. It seemed that the features of the functionalized feldspar surfaces provide a preferable environmental host to enable the adsorption of lipase via interfacial adsorption method. Lipase immobilization onto feldspar support were further confirmed by scanning electron microscopy (SEM) coupled with energy dispersive X-ray microanalysis (EDX), transmission electron microscopy (TEM) and infra-red spectroscopy (FTIR) techniques. Enhancement of protein loading (up to 8.22 mg protein/g support) and immobilization yield (up to 78%) were shown by modified feldspar-lipase derivatives compared to unmodified feldspar support.

Matched MeSH terms: Aluminum Silicates
Fulltext Phenolics, flavonoids content and antioxidant activities of 4 Malaysian herbal plants

Azizah Othman, Nor Juwariah Mukhtar, Nurul Syakirin Ismail, Sui Kiat Chang

International Food Research Journal, 2014;21(2):759-766.
MyJurnal

Water and ethanolic extracts of four Malaysian local herbs, Tenggek burung (Melicope Iunu-ankenda), Kesum (Polygonum minus), Curry leave (Murraya Koenigii) and Salam (Eugenia polyantha) were investigated for their total phenolic content (TPC), total flavonoids content (TFC) and antioxidant activities (AA). Total phenolic content (TPC) of the herbs was determined using Folin-Ciocalteu reagent assay while the total flavonoid content (TFC) was determined based on aluminium chloride-flavonoid assay. The determination of AA was done using 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activitiy and β-carotene bleaching assays (BCB). Different extraction solvents significantly affected the TPC, TFC and AA of all herbs studied (p < 0.05). Both Tenggek burung and Kesum showed highest TPC, TFC and AA regardless of extraction solvents compared to Curry leave and Salam. All herbs showed strong positive correlation between TPC and DPPH assay. However, negative and low correlation between TFC and AA were obtained for all herbs studied. This showed that phenolic compounds of certain structures were responsible for the AA of all the herbs in this study. In conclusion, all herbs in this study except curry leave could be inexpensive sources of good natural antioxidants with nutraceutical potential in food industry.

Matched MeSH terms: Aluminum Compounds
Fulltext Assessment of bioactive compounds, nutritional composition and antioxidant activity of Malaysian young ginger ( Zingiber officinale Roscoe)

Mojani, M.S., Ghasemzadeh, A., Rahmat, A., Loh, S.P., Ramasamy, R.

International Food Research Journal, 2014;21(5):1931-1935.
MyJurnal

In current work, the nutritional composition, bioactive compounds, total phenolic contents and anti-oxidant activity of young Malaysian ginger rhizome were investigated. Proximate analysis and high performance liquid chromatography (HPLC) recruited to determine nutritional composition and bioactive compounds. The total flavonoid (TF) and total phenolic contents (TPC) of ginger rhizome were determined by aluminium chloride calorimetric assay and Folin-Ciocalteau reagent, respectively. 2,2’-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging method were used to measure antioxidant capacity. The rhizome contained high moisture content and low level of carbohydrate and energy. 6-gingerol was the most abundant component in the selected ginger, and total flavonoid and phenolic content were reported to be 3.66±0.45 mg gallic acid/g and 10.22±0.87 mg quercetin/g of dry weight of rhizome, respectively. The rhizome also showed lower antioxidant activity than controls, with the IC 50 value of 46.5 vs. 15.5 for α-tocopherol and 22 for BHT. The results of this study predicted that the young ginger rhizome originated from Malaysia may exhibit anti-oxidative and anti-inflammatory potentials due to high levels of gingerols, total flavonoid and phenolic compounds and antioxidant capacity.

Matched MeSH terms: Aluminum Compounds
Utilization of red mud waste into mesoporous ZSM-5 for methylene blue adsorption-desorption studies

Tehubijuluw H, Subagyo R, Yulita MF, Nugraha RE, Kusumawati Y, Bahruji H, et al.

Environ Sci Pollut Res Int, 2021 Mar 13.
PMID: 33712959 DOI: 10.1007/s11356-021-13285-y

Red mud as industrial waste from bauxite was utilized as a precursor for the synthesis of mesoporous ZSM-5. A high concentration of iron oxide in red mud was successfully removed using alkali fusion treatment. Mesoporous ZSM-5 was synthesized using cetyltrimethylammonium bromide (CTABr) as a template via dual-hydrothermal method, and the effect of crystallization time was investigated towards the formation of mesopores. Characterization using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), N2 adsorption-desorption, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) indicated the formation of cubic crystallite ZSM-5 with high surface area and mesopore volume within 6 h of crystallization. Increasing the crystallization time revealed the evolution of highly crystalline ZSM-5; however, the surface area and mesoporosity were significantly reduced. The effect of mesoporosity was investigated on the adsorption of methylene blue (MB). Kinetic and thermodynamic analysis of MB adsorption on mesoporous ZSM-5 was carried out at a variation of adsorption parameters such as the concentration of MB solution, the temperatures of solution, and the amount of adsorbent. Finally, methanol, 1-butanol, acetone, hydrochloric acid (HCl), and acetonitrile were used as desorbing agents to investigate the reusability and stability of mesoporous ZSM-5 as an adsorbent for MB removal.

Matched MeSH terms: Aluminum Oxide
A Recombinant Subunit HSABA392 as a potential Vaccine for Haemorrhagic septicaemia disease in livestock

Rita DV, Swee KCW, Shamini C, Kang TL, Nurshamimi NR, Hussin AR, et al.

Trop Biomed, 2018 Dec 01;35(4):1075-1086.
PMID: 33601854

Haemorrhagic septicaemia (HS) is a major disease in cattle and buffaloes, caused by certain serotypes of Pasteurella multocida, mainly B and E serotypes. Frequent HS outbreak has a major impact in many Asian countries, including Malaysia, where farmers encounter economic loss due to low milk production as well as death of their livestock. There are four types of vaccines available; broth bacterins, alum precipitated vaccine, aluminium hydroxide gel vaccine and oil adjuvant vaccine (OAV), but these vaccines can only provide short term immunity and therefore need to be administered annually. Hence, the development of a protein vaccine using recombinant antigen can be a potential candidate for the production of HS vaccine that would give longer immunity. We have successfully cloned the ABA392 gene fragment into a protein expression vector, pET-30a. The protein was expressed from our ABA392/pET30a clone and the immunogenicity of the protein has been tested on rats. This vaccine was able to trigger an immune response and therefore has the potential to be tested as suitable vaccine candidate in future studies. It is envisaged that this subunit vaccine will make a significant contribution in the management of HS among livestock in future.

Matched MeSH terms: Aluminum Hydroxide
Sensitive silica-alumina modified capacitive non-Faradaic glucose sensor for gestational diabetes

Chen L, Xie W, Luo Y, Ding X, Fu B, Gopinath SCB, et al.

Biotechnol Appl Biochem, 2021 Mar 30.
PMID: 33786878 DOI: 10.1002/bab.2155

A highly sensitive silica-alumina (Si-Al)-modified capacitive non-Faradaic glucose biosensor was introduced to monitor gestational diabetes. Glucose oxidase (GOx) was attached to the Si-Al electrode surface as the probe through amine-modification followed by glutaraldehyde premixed GOx as aldehyde-amine chemistry. This Si-Al (∼50 nm) modified electrode surface has increased the current flow upon binding of GOx with glucose. Capacitance values were increased by increasing the glucose concentrations. A mean capacitance value was plotted and the detection limit was found as 0.03 mg/mL with the regression coefficient value, R² = 0.9782 [y = 0.8391x + 1.338] on the linear range between 0.03 and 1 mg/mL. Further, a biofouling experiment with fructose and galactose did not increase the capacitance, indicating the specific glucose detection. This Si-Al-modified capacitance sensor detects a lower level of glucose presence and helps in monitoring gestational diabetes.

Matched MeSH terms: Aluminum Oxide
Fulltext REMOVAL OF ERIOCHROME BLACK T DYE FROM AQUEOUS SOLUTION BY NICKEL/ALUMINIUM LAYERED DOUBLE HYDROXIDE

NURDIYANA ROSLAN, MAZIDAH MAMAT, MAZIDAH MAMAT, KU HALIM KU BULAT

UMT Journal of Undergraduate Research, 2019;1(3):79-86.
MyJurnal

Batik industryiswell known intheEast Coast of Malaysia, particularly in Terengganu and Kelantan. This industry consumes a lot of waterforthe batik making processwhich contributes tohigh dischargeof wastewater containingexcess dye pollutants. Hence,in this study, ananionic clayofnickel/aluminium-layered double hydroxide (NiAL) was investigatedas a potential adsorbent for the removal of anionic dyeof Eriochrome Black T (EBT). The NiAL was synthesized via self-assemblymethod and characterization of NiALwas carried outusing powder X-ray diffraction (PXRD) and Fourier transform infrared spectrophotometer (FTIR). The composition and morphology of NiAL was further analyzed using carbon, hydrogen, nitrogen, sulphur elemental analyzer (CHNS), thermogravimetric analyzer (TGA) and scanning electron microscope (SEM).The potential of NiAL as an adsorbent for the removal ofEBT in aqueous solution was tested at different dosages of NiAL. Theadsorptionabilitywasanalyzedby using two common adsorption isotherms, which were Langmuir and Freundlich models. The adsorption of EBT onto NiAL was governedby Freundlich isotherm model indicating that the adsorption occurs in heterogeneous system.

Matched MeSH terms: Aluminum
Fulltext Immunogenicity and Safety of the AS04-adjuvanted Human Papillomavirus-16/18 Cervical Cancer Vaccine in Malaysian Women Aged 18-35 years: A Randomized Controlled Trial

Lim BK, Ng KY, Omar J, Omar SZ, Gunapalaiah B, Teoh YL, et al.

Med J Malaysia, 2014 Feb;69(1):2-8.
PMID: 24814620

INTRODUCTION: Cervical cancer is the third most common cancer in women worldwide. The HPV-16/18 AS04- adjuvanted vaccine (Cervarix©) has previously been shown to be highly immunogenic with a clinically acceptable safety profile. This phase IIIb, double-blind, randomized (1:1) and placebo controlled trial (NCT00345878) was designed to evaluate the vaccine immunogenicity against HPV-16 and HPV-18 as well as its safety and reactogenicity in Malaysian women.

METHODS: Healthy women aged 18-35 years received intramuscularly three doses of either the vaccine (HPV group) or aluminium hydroxide (ALU group) at 0, 1, and 6 months. Antibody titers were measured by an enzyme-linked immunosorbent assay (ELISA).

RESULTS: A total of 271 eligible subjects were enrolled and 266 subjects completed the study. Initially seronegative subjects in the HPV group showed 100% seroconversion one month post-dose-3 for anti HPV-16 and anti-HPV-18 antibodies with geometric mean titers of 11107.5 (95% CI: 9727.3-12683.4) EL.U/mL and 4273.5 (95% CI: 3771.8-4841.9) EL.U/mL, respectively. Over 96% of subjects in both groups received all three vaccine doses. Solicited local (pain) and general symptoms (myalgia, fatigue, arthralgia and headache) were commonly reported in both HPV and ALU groups. Eight serious adverse events were reported throughout the study (five in the HPV group; three in the ALU group), all considered by investigators to be unrelated to vaccination.

CONCLUSION: The HPV-16/18 AS04-adjuvanted vaccine was immunogenic and generally well tolerated in Malaysian women aged 18-35 years.

Matched MeSH terms: Aluminum Hydroxide
Comparison of the load at fracture of Turkom-Cera to Procera AllCeram and In-Ceram all-ceramic restorations

AL-Makramani BM, Razak AA, Abu-Hassan MI

J Prosthodont, 2009 Aug;18(6):484-8.
PMID: 19694015

PURPOSE: This study investigated the occlusal fracture resistance of Turkom-Cerafused alumina compared to Procera AllCeram and In-Ceram all-ceramic restorations.
MATERIALS AND METHODS: Sixmaster dies were duplicated from the prepared maxillary first premolar tooth using nonprecious metal alloy (Wiron 99). Ten copings of 0.6 mm thickness were fabricated from each type of ceramic, for a total of thirty copings. Two master dies were used for each group, and each of them was used to lute five copings. All groups were cemented with resin luting cement Panavia F according to manufacturer's instructions and received a static load of 5 kg during cementation. After 24 hours of distilled water storage at 37 degrees C, the copings were vertically compressed using a universal testing machine at a crosshead speed of 1 mm/min.
RESULTS: The results of the present study showed the following mean loads at fracture: Turkom-Cera (2184 +/- 164 N), In-Ceram (2042 +/- 200 N), and Procera AllCeram (1954 +/- 211 N). ANOVA and Scheffe's post hoc test showed that the mean load at fracture of Turkom-Cera was significantly different from Procera AllCeram (p < 0.05). Scheffe's post hoc test showed no significant difference between the mean load at fracture of Turkom-Cera and In-Ceram or between the mean load at fracture of In-Ceram and Procera AllCeram.
CONCLUSION: Because Turkom-Cera demonstrated equal to or higher loads at fracture than currently accepted all-ceramic materials, it would seem to be acceptable for fabrication of anterior and posterior ceramic crowns.

Matched MeSH terms: Aluminum Oxide
Production of biodiesel from Jatropha curcas L. oil catalyzed by SO₄²⁻/ZrO₂ catalyst: effect of interaction between process variables

Yee KF, Lee KT, Ceccato R, Abdullah AZ

Bioresour Technol, 2011 Mar;102(5):4285-9.
PMID: 21232947 DOI: 10.1016/j.biortech.2010.12.048

This study reports the conversion of Jatrophacurcas L. oil to biodiesel catalyzed by sulfated zirconia loaded on alumina catalyst using response surface methodology (RSM), specifically to study the effect of interaction between process variables on the yield of biodiesel. The transesterification process variables studied were reaction temperature, reaction duration, molar ratio of methanol to oil and catalyst loading. Results from this study revealed that individual as well as interaction between variables significantly affect the yield of biodiesel. With this information, it was found that 4h of reaction at 150°C, methanol to oil molar ratio of 9.88 mol/mol and 7.61 wt.% for catalyst loading gave an optimum biodiesel yield of 90.32 wt.%. The fuel properties of Jatropha biodiesel were characterized and it indeed met the specification for biodiesel according to ASTM D6751.

Matched MeSH terms: Aluminum Oxide
An evaluation of the effects of handpiece speed, abrasive characteristics, and polishing load on the flexural strength of polished ceramics

Ahmad R, Morgano SM, Wu BM, Giordano RA

J Prosthet Dent, 2005 Nov;94(5):421-9.
PMID: 16275301

Many studies on the strengthening effects of grinding and polishing, as well as heat treatment on ceramics, are not well standardized or use commercially available industrial polishing systems. The reported effectiveness of these strengthening mechanisms on ceramics may not be applicable to clinical dentistry.

Matched MeSH terms: Aluminum Oxide
Effect of luting cements on the compressive strength of Turkom-Cera all-ceramic copings

Al-Makramani BM, Razak AA, Abu-Hassan MI

J Contemp Dent Pract, 2008;9(2):33-40.
PMID: 18264523

The objective of this study is to investigate the effect of different luting agents on the fracture strength of Turkom-Cera all-ceramic copings.

Matched MeSH terms: Aluminum Oxide
Fulltext The prevalence of dental fluorosis and its associated factors in Salem district

Ramesh M, Narasimhan M, Krishnan R, Chalakkal P, Aruna RM, Kuruvilah S

Contemp Clin Dent, 2016 6 17;7(2):203-8.
PMID: 27307668 DOI: 10.4103/0976-237X.183061

CONTEXT: There are various regions in India that have high levels of fluoride in drinking water sources. Many people residing in such places suffer from dental fluorosis (DF).
AIMS: To evaluate the prevalence of DF in children residing in Salem and also to find any correlation between DF and other related factors.
MATERIALS AND METHODS: One school from each block of Salem (total 21 blocks) was selected for the study. A single examiner had evaluated untreated caries, lesions, and DF (for permanent anterior teeth and molars) using the Dean's fluorosis index, in all children. Water fluoride level determination at each school was done using the Tamil Nadu Water Fluoridation and Drainage Board field kit. Other factors that may have contributed to DF were assessed using a questionnaire, which was provided to each student. The data obtained were statistically analyzed using the SPSS software version 11.5.
STATISTICAL ANALYSIS: Chi-square test was used for statistical analysis.
RESULTS: DF was present in 56.9% of the children examined. It was mostly seen in 9 years old (72%) and male (59%) children. A positive correlation was found between the occurrence of DF and the duration of residence in a place with high water fluoride content, consumption of borewell water (64%), the parts per million of fluoride in drinking water, consumption of black tea (59%). However, no correlation was found between DF, dental caries, consumption of milk, or consumption of foods cooked in aluminum vessels.
CONCLUSION: There was a correlation between DF and factors such as male gender, bore well water consumption, black tea consumption and the duration of residence in a place with high water fluoride content.

Matched MeSH terms: Aluminum
A voltammetric immunosensor based on a nanoporous alumina millirod for detection of porcine serum albumin

Mahmud AH, Salahuddin NM, Md Jani AM, Abu Bakar NF, Zainal Abidin SAS, Mohd Zain Z, et al.

Food Chem, 2023 Jun 15;411:135493.
PMID: 36689871 DOI: 10.1016/j.foodchem.2023.135493

A voltammetric immunosensor was developed for detection of porcine serum albumin (PSA) to identify raw meat products adulterated with pork. A novel strategy to fabricate multiple individual nanoporous alumina (NPA) millirods (length, 5.0 mm; diameter, 1.0 mm) as the biorecognition platform is described. Each NPA millirod was covalently bioconjugated with anti-PSA capturing antibodies (α-PSAC). Following immunocapture, the PSA bound to the α-PSAC/NPA millirod bioconjugate were tagged with gold nanoparticles (AuNPs) functionalized with anti-PSA detection antibodies as the signaling probe. Subsequently, the AuNPs were voltammetrically analyzed to quantify the target PSA. The immunosensor exhibited 100 % specificity and high sensitivity to PSA with a limit of detection (LoD) of 50 (range, 0-1000) pg/mL (R2 = 0.9907). Real-world applicability was successfully validated using pork/beef adulterated mixtures with a LoD of 0.05 % (w/w). Overall, the detection performance of the proposed immunosensor was excellent and, thus, is suitable for surveillance of food safety and quality.

Matched MeSH terms: Aluminum Oxide

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links