Displaying publications 41 - 60 of 237 in total

Abstract:
Sort:
  1. Saba, Z.H., Suzana, M., Yasmin Anum, M.Y.
    Medicine & Health, 2013;8(1):3-18.
    MyJurnal
    Madu adalah bahan semulajadi yang dihasilkan oleh lebah madu, Apis mellifera, berpunca daripada madu yang diambil dari bunga yang berkembang atau cecair dari pokok dan tumbuhan yang dikenali sebagai madu nektar dan madu serangga masing-masing. Ia adalah larutan tepu gula, yang kaya dengan protein, mineral, vitamin, asid organik dan polifenol. Madu mempunyai pelbagai khasiat, sifat penyembuhan dan profilaktik disebabkan oleh komponen-komponen yang terkandung di dalamnya. Madu mempunyai beberapa khasiat kesihatan seperti penyembuhan luka, antimikrob, antioksidan dan potensi anti-radang. Ulasan ini adalah berkaitan komposisi nutrien, antioksidan dan kesan terapeutik madu dengan penekanan kepada madu di Malaysia.
    Matched MeSH terms: Minerals
  2. Saadi S, Saari N, Abdulkarim MS, Ghazali HM, Anwar F
    J Control Release, 2018 03 28;274:93-101.
    PMID: 29031897 DOI: 10.1016/j.jconrel.2017.10.011
    Cell impurities are an emerging nucleating molecular barriers having the capability in disordering the metabolic chain reactions of proteolysis, glycolysis and lipolysis. Their massive effects induced by copolymer crystal growth in compaction with metal and mineral transients are extended as well as in damaging DNA and mRNA structure motif and other molecular assembly e.g. histones structure unites. Their polycrystalline packing modes, polydispersity and their tendency to surface and interface adhesion prompted us in structuring scaffold biomaterials enriched with biopeptides, layered by phospho-glycerides ester-forms. The interface tension of the formed map is flexible and dependent to the surface exposure and its collapse modes to the surrounding molecular ligands. Thus, the attempts in increasing surface exposure e.g. the viscoelastic of structured lipopeptides and types of formed network structures interplays an extra- conjugating biomolecules having a least cytotoxicity effects to cells constituents. Disulfides molecules are selected to be the key regulatory element in rejoining both lipidic and proteic moieties by disordering atoms status via chemical ionization using organic catalyst. The insertion of methionine based peptidic chain at the lateral surfaces of scaffold biomaterials enhances the electron-meta-static motions by raising a molecular disordering status at distinct regions of the map e.g. epimerization into a nonpolar side that helps the chemical conjunction of disulfide groups with the esterified phosphoglycerides mono-layers. These effects in turn are accomplished by the formation of meso-sphere nonpolar- vesicles. The oxidation of disulfide group would alter the ordering of initial molecules by raising a newly molecular disorders to the map with high polarity to surface regions. In the same time indicates a continuation in the crystallization growth factor via a low chemical lesions between the impurities and a supersaturation in the intra-atomic distances with maximum cross linking to the deformed ligand with scaffold biomaterials.
    Matched MeSH terms: Minerals
  3. SH, Ku, YS, Tan, Yahya NA
    Ann Dent, 2014;21(1):25-32.
    MyJurnal
    The study aimed to evaluate the quality of the hybrid
    layer form by three different adhesive systems. Class V
    cavities were prepared on the buccal surface of fourty
    extracted human premolars. The prepared teeth were
    randomly assigned into four groups according to the
    adhesive system and application mode. The systems
    were: Optibond S (OS, total-etch); Optibond Versa (OV,
    two-bottles, self-etch); Single Bond Universal (SBU,
    one-bottle, self-etch) and Single Bond Universal with
    etchant (SBU + etchant). All cavities were restored with
    composite (Filtek Z350XT). The samples were sectioned,
    polished and pretreated to remove minerals, protein
    and water prior to SEM evaluation. From the images,
    thickness of the hybrid layers was measured. Present of
    resin tags and adaptation failure were also recorded. The
    data obtained were analyzed using ANOVA, Dunnett’s
    T3, Kruskal-Wallis and Mann-Whitney tests. OS group
    showed the highest average hybrid layer thickness (4.34
    µm), followed by SBU + etchant (3.06 µm), OV (1.91 µm)
    and SBU (0.95 µm). Both adhesive and cohesive failures
    were observed in SBU group. Present of prominent resin
    tags were seen in both OS and OV groups. In conclusion,
    all the investigated adhesive systems were able to perform
    distinguishable actions as shown in micro-morphological
    alteration and hybrid layer thickness. Two-bottles, selfetch
    adhesive (OV) was proven to produce negligible
    adaptation failure compared to other adhesive systems in
    the present study. Combined all-in-one adhesive (SBU)
    was found to render a superior bonding performance in
    total-etch mode comparing to self-etch mode.
    Matched MeSH terms: Minerals
  4. Ruszymah Idrus, Nur Qisya Afifah Veronica Sainik, Ayu Suraya Ansari, Rabiatul Adawiyah Razali, Abid Nordin, Aminuddin Saim, et al.
    Sains Malaysiana, 2018;47:2741-2755.
    Ficus carica, a native plant to the Middle East and Western Asia, is of high value in folk medicine. The therapeutic potential
    of Ficus carica has led to the extensive studies in recent years, focusing on evaluating and validating its pharmacological
    effect. The present systematic review summarizes the effectiveness of Ficus carica on promoting bone health focusing on
    osteoporosis and rheumatoid arthritis via mineral contents and RANKL pathway. The search was done with Medline via
    Ebscohost, Scopus and Google Scholar databases to obtain relevant articles published between 1946 and December
    2016. The main inclusion criteria were research articles published in English that reported effect of Ficus carica on
    bone health. The literature search returned 716 potentially relevant articles, whereby 5 met the inclusion criteria. This
    systematic review concludes Ficus carica plays an important role in the promotion of bone health and can be a potential
    pharmaceutical product in the future.
    Matched MeSH terms: Minerals
  5. Rohani-Ghadikolaei K, Abdulalian E, Ng WK
    J Food Sci Technol, 2012 Dec;49(6):774-80.
    PMID: 24293698 DOI: 10.1007/s13197-010-0220-0
    The proximate, fatty acid and mineral composition were determined for green (Ulva lactuca and Enteromorpha intestinalis), brown (Sargassum ilicifolium and Colpomenia sinuosa) and red (Hypnea valentiae and Gracilaria corticata) seaweeds collected from the Persian Gulf of Iran. Results showed that the seaweeds were high in carbohydrate (31.8-59.1%, dry weight) and ash (12.4-29.9%) but low in lipid content (1.5-3.6%). The protein content of red or green seaweeds was significantly higher (p 
    Matched MeSH terms: Minerals
  6. Rohana Abdul Jalil, Zulkifli Ahmad
    MyJurnal
    The aim of the study is to describe the usage of dietary supplemenu among doctors working in the hospitals in Kota Bharu, Kelantan. The method used was a postal questionaire survey of the doctors, both specialists and medical officers working in these hospitals. The results showed that
    only 28.7% of the doctors are taking dietary supplements. Significantly more female doctors and doctors on long term medication, were taking these supplements. The dietary supplements commonly used were multivitamins and minerals (92.3%), garlic (26.9%), vitamin C (26.9%) and
    lecithin (15.4%). The majority of the doctors who took dietary supplements (60%) felt their health status have improved. These supplements were mostly obtained from hospital pharmacies. Doctors who puchase their own supplements spend between RMIO to RMIZO per month. The main reasons given for taking these supplements were that the doctors jfelt healthier' and to ‘prevent or as a supplementary treatment’ for conditions like hypercholesterolaemia, hypertension, ischaemic heart disease and cancers. There were four doctors who regularly use traditional dietary supplements. Most doctors will generally advice their patients and children to take dietary supplements regularly, as they felt that it is important for health.
    Matched MeSH terms: Minerals
  7. Ricca, R.N., Jami, Mohammed Saedi, Alam, Md. Zahangir
    MyJurnal
    This work aims at optimizing the media constituents for citric acid production from oil palm empty fruit bunches (EFB) as renewable resource using artificial neural networks (ANN) approach. The bioconversion process was done through solid state bioconversion using Aspergillus niger. ANN model was built using MATLAB software. A dataset consists of 20 runs from our previous work was used to develop ANN. The predictive and generalization ability of ANN and the results of RSM were compared. The determination coefficients (R2-value) for ANN and RSM models were 0.997 and 0.985, respectively, indicating the superiority of ANN in capturing the non-linear behavior of the system. Validation process was done and the maximum citric acid production (147.74 g/kg-EFB) was achieved using the optimal solution from ANN which consists of 6.1% sucrose, 9.2% mineral solution and 15.0% inoculum.
    Matched MeSH terms: Minerals
  8. Revathi Rajan, Yusmazura Zakaria, Shaharum Shamsuddin, Nik Fakhuruddin Nik Hassan
    MyJurnal
    Introduction: Rice husk has portrayed great potential in becoming a sustainable biomass source in producing silica, cellulose and carbon materials, which garnered widespread interest among researchers. The objective of the current study is to determine the morphological and compositional changes in rice husk due to the synergistic effects of ther- mochemical treatment. Methods: Washed and dried rice husk was blended into a fine powder and then subjected to step-wise heat treatment and acid digestion to produce white ash. The intermittent products, as well as the original rice husk and the final ash product, were characterised using analytical instruments to document the morphologi- cal and chemical composition changes. Results: This report highlights the production of pure rice husk ash using a step-wise treatment using a combination of thermochemical treatment and carbonisation. The results showed that a partial breakdown of the lignocellulose components was achieved using directed thermal treatment at low tem- perature. The ionic impurities were leached out in subsequent heated acid treatment. Thereafter, the carbonaceous organic matter was completely converted to carbon during the carbonisation of the sample and the remaining carbon residue was removed during calcination. High purity ash contained agglomerated and nanostructured silica in the dimensions of 20 to 50 nm in the amorphous form. Conclusion: The step-wise treatment allowed systematic removal of each compound while maintaining the amorphous mineral phase of silica and avoiding carbon fixation. Under- standing the effect of each treatment offers insight to produce purer silica from rice husk.
    Matched MeSH terms: Minerals
  9. Ravindran B, Karmegam N, Awasthi MK, Chang SW, Selvi PK, Balachandar R, et al.
    Bioresour Technol, 2022 Feb;346:126442.
    PMID: 34848334 DOI: 10.1016/j.biortech.2021.126442
    The present study proposes a system for co-composting food waste and poultry manure amended with rice husk biochar at different doses (0, 3, 5, 10%, w/w), saw dust, and salts. The effect of rice husk biochar on the characteristics of final compost was evaluated through stabilization indices such as electrical conductivity, bulk density, total porosity, gaseous emissions and nitrogen conservation. Results indicated that when compared to control, the biochar amendment extended the thermophilic stage of the composting, accelerated the biodegradation and mineralization of substrate mixture and helped in the maturation of the end product. Carbon dioxide, methane and ammonia emissions were reduced and the nitrogen conservation was achieved at a greater level in the 10% (w/w) biochar amended treatments. This study implies that the biochar and salts addition for co-composting food waste and poultry manure is beneficial to enhance the property of the compost.
    Matched MeSH terms: Minerals
  10. Raof NA, Yunus R, Rashid U, Azis N, Yaakub Z
    Protein Pept Lett, 2018;25(2):171-179.
    PMID: 29359647 DOI: 10.2174/0929866525666180122095056
    BACKGROUND: The transesterification of high oleic palm oil methyl ester (HOPME) with neopentyl glycol (NPG) has been investigated. The present study revealed the application of low-pressure technology as a new synthesis method to produce NPG diesters. Single variable optimization and response surface methodology (RSM) were implemented to optimize the experimental conditions to achieve the maximum composition (wt%) of NPG diesters.

    OBJECTIVE: The main objective of this study was to optimize the production of NPG diesters and to characterize the optimized esters with typical chemical, physical and electrical properties to study its potential as insulating oil.

    METHODS: The transesterification reaction between HOPME and NPG was conducted in a 1L three-neck flask reactor at specified temperature, pressure, molar ratio and catalyst concentration. For the optimization, four factors have been studied and the diester product was characterized by using gas chromatography (GC) analysis. The synthesized esters were then characterized with typical properties of transformer oil such as flash point, pour point, viscosity and breakdown voltage and were compared with mineral insulating oil and commercial NPG dioleate. For formulation, different samples of NPG diesters with different concentration of pour point depressant were prepared and each sample was tested for its pour point measurement.

    RESULTS: The optimum conditions inferred from the analyses were: molar ratio of HOPME to NPG of 2:1.3, temperature = 182°C, pressure = 0.6 mbar and catalyst concentration of 1.2%. The synthesized NPG diesters showed very important improvement in fire safety compared to mineral oil with flash point of 300°C and 155°C, respectively. NPG diesters also exhibit a relatively good viscosity of 21 cSt. The most striking observation to emerge from the data comparison with NPG diester was the breakdown voltage, which was higher than mineral oil and definitely in conformance to the IEC 61099 limit at 67.5 kV. The formulation of synthesized NPD diesters with VISCOPLEX® pour point depressant has successfully increased the pour point of NPG diester from -14°C to -48°C.

    CONCLUSION: The reaction time for the transesterification of HOPME with NPG to produce NPG diester was successfully reduced to 1 hour from the 14 hours required in the earlier synthesis method. The main highlight of this study was the excess reactant which is no longer methyl ester but the alcohol (NPG). The optimum reaction conditions for the synthesis were molar ratio of 2:1.13 for NPG:HOPME, 182°C, 0.6 mbar and catalyst concentration of 1.2 wt%. The maximum NPG diester yield of 87 wt% was consistent with the predicted yield of 87.7 wt% obtained from RSM. The synthesized diester exhibited better insulating properties than the commercial products especially with regards to the breakdown voltage, flash point and moisture content.

    Matched MeSH terms: Minerals
  11. Ramesh M, Narasimhan M, Krishnan R, Aruna RM, Kuruvilla S
    J Oral Maxillofac Pathol, 2017 Sep-Dec;21(3):345-350.
    PMID: 29391706 DOI: 10.4103/jomfp.JOMFP_247_16
    Background: Fluoride is needed for the normal development of bone and teeth; in high levels, it affects developing teeth and bone. Dental fluorosis (DF) is caused by ingestion of excess fluoride mainly through drinking water.

    Aim: The present study aims to observe and understand the histological changes of fluorosed teeth under light microscope (LM).

    Materials and Methods: Teeth which were indicated for extractions for orthodontic or periodontal problems were selected. Thirty extracted teeth were selected with varying degrees of DF based on modified Dean's fluorosis index. Ground sections of these teeth were prepared and the sections were studied under binocular LM. Photomicrographs were taken under high power objective using 15 megapixels Nikon camera.

    Results and Conclusion: Qualitative histologic changes in different grades of fluorosed teeth were evaluated in enamel, dentin, cementum and between their junctions. Fluoride interacts with enamel in both mineral phases and organic macromolecules by strong ionic and hydrogen bonds resulting in incomplete crystal growth at prism peripheries. This presents as hypomineralization of enamel and dentin, increased interglobular dentin, increased secondary curvatures and changes in cementum such as diffuse cementodentinal junction and increased thickness of Tomes' granular layer. Changes in the structure of the teeth with Dean's index below 2 and teeth with Dean's index of 2 and above were compared using Chi-square test. P value was found to be highly significant being 0.00047. Many of the features of dental fluorosis seen in the present study under light microscope are comparable to those results studied under specialized microscopes.
    Matched MeSH terms: Minerals
  12. Rajan, Nithiya Shanmuga, Bhat,Rajeev, Karim, A.A.
    MyJurnal
    Unripe and ripe kundang fruits (Bouea macrophylla Griffith) is either consumed fresh or is cooked in Malaysia. In this study composition of unripe and ripe fruits (proximate, amino acids profile, minerals and heavy metal contents) were evaluated. Results obtained showed unripe kundang fruit to possess higher moisture, ash, crude lipid, crude fiber and crude protein contents than the ripe fruits. With regard to amino acid contents, unripe fruits had higher content of essential amino acids. The unripe and ripe fruits were found to be rich in essential minerals with potassium (K) to be in abundance. Heavy metals such as cadmium, nickel, mercury, lead and arsenic, were detected in trace amounts (< 5.0 mg/kg) in both unripe and ripe fruits. Through this investigation, it is concluded that both unripe and ripe fruits to posses’ adequate amount of nutritionally important compounds beneficial to human health and can be explored for commercial purposes.
    Matched MeSH terms: Minerals
  13. Rahmat K, Wastie M, Abdullah B
    Biomed Imaging Interv J, 2007 Oct;3(4):e52.
    PMID: 21614300 MyJurnal DOI: 10.2349/biij.3.4.e52
    Primary bone lymphoma is an uncommon tumour accounting for approximately 4-5% of extra nodal lymphoma and less than 1% of all Non-Hodgkin's lymphoma. The radiographic appearance of primary bone lymphoma is variable. As lesions frequently resemble other disease processes namely chronic osteomyelitis and metastases, further imaging evaluation and histopathological examination allow early identification for appropriate treatment. The authors present a case of anaplastic large cell lymphoma of bone presenting with multifocal osseus involvement.
    Matched MeSH terms: Minerals
  14. Rahmani O, Highfield J, Junin R, Tyrer M, Pour AB
    Molecules, 2016 Mar 16;21(3):353.
    PMID: 26999082 DOI: 10.3390/molecules21030353
    In this work, the potential of CO₂ mineral carbonation of brucite (Mg(OH)2) derived from the Mount Tawai peridotite (forsterite based (Mg)₂SiO4) to produce thermodynamically stable magnesium carbonate (MgCO3) was evaluated. The effect of three main factors (reaction temperature, particle size, and water vapor) were investigated in a sequence of experiments consisting of aqueous acid leaching, evaporation to dryness of the slurry mass, and then gas-solid carbonation under pressurized CO2. The maximum amount of Mg converted to MgCO₃ is ~99%, which occurred at temperatures between 150 and 175 °C. It was also found that the reduction of particle size range from >200 to <75 µm enhanced the leaching rate significantly. In addition, the results showed the essential role of water vapor in promoting effective carbonation. By increasing water vapor concentration from 5 to 10 vol %, the mineral carbonation rate increased by 30%. This work has also numerically modeled the process by which CO₂ gas may be sequestered, by reaction with forsterite in the presence of moisture. In both experimental analysis and geochemical modeling, the results showed that the reaction is favored and of high yield; going almost to completion (within about one year) with the bulk of the carbon partitioning into magnesite and that very little remains in solution.
    Matched MeSH terms: Minerals/chemistry*
  15. Rabeta, M.S., Nur Faraniza, R.
    MyJurnal
    In this study, two types of plants materials were used namely Garcinia atrovirdis and Cynometra
    cauliflora to determine the proximate composition, mineral content and antioxidant activities. Total phenolic content (TPC) and ferric reducing antioxidant power (FRAP) assay had been used to determine antioxidant activity in both samples. The moisture, ash, fiber, fat, protein and carbohydrate content in both samples were determined by using Association of Official Analytical Chemists (AOAC) methods. Mineral content in the sample was determined using Atomic absorption spectrophotpmetry (AAS). The results showed higher TPC and FRAP values in Cynometra cauliflora compared to Garcinia atrovirdis. Methanol extractions gave higher TPC and FRAP values compared to water extraction. The results obtained indicated that both samples have the potential to be as a source of natural antioxidants. Further study should be conducted to explore the benefits of underutilized fruits not only in antioxidant activity but other usages as well.
    Matched MeSH terms: Minerals
  16. R.(III) P. Dioso
    ASM Science Journal, 2014;8(1):55-66.
    MyJurnal
    Through the six domains of the health-related quality of life (HRQOL) - physical, psychological, level of independence, social relationship, environment and spirituality or religion - ten out of one hundred randomly selected studies were analysed and evaluated as a theoretical outcome of self care using health products such as food supplements, multivitamins and minerals. A reconstructed HRQOL tool was used in the qualitative and the quantitative analysis and evaluation of the ten selected studies. A Critical Appraisal Skills Programme tool was also used in making sense of the evidences of the study trials. The Population, Intervention, Comparison and Outcome guide focused the protocol for the selection of the studies used in this meta-analysis. A probability sampling generated a uniform distribution of the populations. The manner of consuming or the route of administration, the volume and the preparation of commercially prepared health products were neither analysed nor evaluated as the exclusion criteria. Of the ten studies, nine gave a high significance to the six domains of the (O.R. = 90% / p =
    Matched MeSH terms: Minerals
  17. Qutob M, Rafatullah M, Muhammad SA, Alamry KA, Hussein MA
    J Environ Manage, 2024 Feb 27;353:120179.
    PMID: 38295641 DOI: 10.1016/j.jenvman.2024.120179
    Natural soil minerals often contain numerous impurities, resulting in comparatively lower catalytic activity. Tropical soils are viewed as poor from soil organic matter, cations, and anions, which are considered the main impurities in the soil that are restricted to utilizing natural minerals as a catalyst. In this regard, the dissolved iron and hematite crystals that presented naturally in tropical soil were evaluated to activate oxidants and degrade pyrene. The optimum results obtained in this study were 73 %, and the rate constant was 0.0553 h-1 under experimental conditions [pyrene] = 300 mg/50 g, pH = 7, T = 55 °C, airflow = 260 mL/min, [Persulfate (PS)] = 1.0 g/L, and humic acid (HA) ( % w/w) = 0.5 %. The soil characterization analysis after the remediation process showed an increase in moieties and cracks of the soil aggregate, and a decline in the iron and aluminium contents. The scavengers test revealed that both SO4•- and O2•- were responsible for the pyrene degradation, while HO• had a minor role in the degradation process. In addition, the monitoring of by-products, degradation pathways, and toxicity assessment were also investigated. This system is considered an efficient, green method, and could provide a step forward to develop low-cost soil remediation for full-scale implementation.
    Matched MeSH terms: Minerals/chemistry
  18. Quek MC, Chin NL, Yusof YA, Law CL, Tan SW
    Food Res Int, 2018 07;109:35-43.
    PMID: 29803459 DOI: 10.1016/j.foodres.2018.03.078
    Edible bird's nest (EBN) is a precious food made from the solidified saliva of swiftlets. EBN from three types of origin, namely production, swiftlet species and geographical were characterised based on its nutritional composition, physicochemical properties and antioxidant properties. Proximate composition, total phenolic content (TPC) and antioxidant activities were determined following official methods, while mineral and heavy metal contents were obtained by respective atomic adsorption spectrometry (AAS) and inductively coupled plasma-mass spectrometry (ICP-MS). Amino acids profile and sialic acid were determined using high performance liquid chromatography (HPLC). Calcium and sodium were the major elements in EBN samples at averages of 17,267 mg/kg and 13,681 mg/kg, respectively. Despite protein contents were not significantly different; interestingly the total amino acids in A. fuciphagus EBN, 64.57 g/100 g was found to be 23% higher than in A. maximus EBN. EBN from house, A. fuciphagus and Peninsular Malaysia had greater antioxidant activities, 2.33-3.49 mg AAE/g and higher sialic acid, 13.57 g/100 g while those from cave, A. maximus and East Malaysia contained more minerals like calcium and magnesium. The 1, 1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging activity and ferric ion reducing antioxidant power (FRAP) of house, A. fuciphagus and Peninsular Malaysia EBNs were approximately 2 times greater than the others. All samples were complied with the Malaysian Standard MS 2334:2011, except for mercury and nitrite. The overall findings suggest that the quality of EBN was varied following the production, species and geographical origins.
    Matched MeSH terms: Minerals
  19. Perumal, V., Khoo, W.C., Abdul-Hamid, A., Ismail, A., Saari, K., Murugesu, S., et al.
    MyJurnal
    Momordica charantia, also known as bitter melon or ‘peria katak’ in Malaysia, is a member of the family Cucurbitaceae. Bitter melon is an excellent source of vitamins and minerals that made it extensively nutritious. Moreover, the seed, fruit and leave of the plant contain bioactive compounds with a wide range of biological activities that have been used in traditional medicines in the treatment of several diseases, including inflammation, infections, obesity and diabetes. The aim of this study was to evaluate changes in urinary metabolite profile of the normal, streptozotocin-induced type 1 diabetes and M. charantia treated diabetic rats using proton nuclear magnetic resonance (1H-NMR) -based metabolomics profiling. Study had been carried out by inducing diabetes in the rats through injection of streptozotocin, which exhibited type 1 diabetes. M. charantia extract (100 and 200 mg/kg body weight) was administrated to the streptozotocin-induced diabetic rats for one week. Blood glucose level after administration was measured to examine hypoglycemic effect of the extract. The results obtained indicated that M. charantia was effective in lowering blood glucose level of the diabetic rats. The loading plot of Partial Least Square (PLS) component 1 showed that diabetic rats had increased levels of lactate and glucose in urine whereas normal and the extract treated diabetic rats had higher levels of succinate, creatine, creatinine, urea and phenylacetylglycine in urine. While the loading plot of PLS component 2 showed a higher levels of succinate, citrate, creatine, creatinine, sugars, and hippurate in urine of normal rat compared to the extract treated diabetic rat. Administration of M. charantia extract was found to be able to regulate the altered metabolic processes. Thus, it could be potentially used to treat the diabetic patients.
    
    Matched MeSH terms: Minerals
  20. Patil R, Ramli ANM, Xuan AS, Xin NZ, Azelee NIW, Bhuyar P
    J Zhejiang Univ Sci B, 2024 Apr 15;25(4):293-306.
    PMID: 38584092 DOI: 10.1631/jzus.B2300383
    The oyster mushroom (Pleurotus spp.) is one of the most widely cultivated mushroom species globally. The present study investigated the effect of synbiotics on the growth and quality of Pleurotus ostreatus and Pleurotus pulmonarius. Different synbiotics formulations were applied by spraying mushroom samples daily and measuring their growth parameters, yield, biological efficiency, proximate composition, mineral content, total phenolic content (TPC), and diphenyl-1-picryl-hydrazyl (DPPH) radical scavenging activity. Results demonstrated that the most significant yield of oyster mushrooms was harvested from synbiotics sprayed with inulin and Lactobacillus casei (56.92 g). Likewise, the highest biological efficiency obtained with a similar synbiotic was 12.65%. Combining inulin and L. casei was the most effective method of improving the mushrooms' growth performance and nutrient content in both samples. Furthermore, synbiotics that combined inulin and L. casei resulted in the highest TPC (20.550 mg gallic acid equivalent (GAE)/g dry extract (DE)) in white oyster mushrooms (P. ostreatus). In comparison, in grey mushroom (P. pulmonarius) the highest TPC was yielded by L. casei (1.098 mg GAE/g DE) followed by inulin and L. casei (1.079 mg GAE/g DE). The DPPH results indicated that the oyster mushroom could be an efficient antioxidant. The results revealed that applying synbiotics improved the mushrooms' quality by increasing their antioxidant capacity with higher amounts of phenolic compounds and offering better health benefits with the increased levels of mineral elements. Together, these studies demonstrated the potential of using synbiotics as a biofertilizer, which is helpful for mushroom cultivation; therefore, it might solve the challenge of inconsistent quality mushroom growers face.
    Matched MeSH terms: Minerals
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links